Merge tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.14

Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.

Major changes:

cfg80211
 * Emergency Preparedness Communication Services (EPCS) station mode support

mac80211
 * an option to filter a sta from being flushed
 * some support for RX Operating Mode Indication (OMI) power saving
 * support for adding and removing station links for MLO

iwlwifi
 * new device ids
 * rework firmware error handling and restart

rtw88
 * RTL8812A: RFE type 2 support
 * LED support

rtw89
 * variant info to support RTL8922AE-VS

mt76
 * mt7996: single wiphy multiband support (preparation for MLO)
 * mt7996: support for more variants
 * mt792x: P2P_DEVICE support
 * mt7921u: TP-Link TXE50UH support

ath12k
 * enable MLO for QCN9274 (although it seems to be broken with dual
   band devices)
 * MLO radar detection support
 * debugfs: transmit buffer OFDMA, AST entry and puncture stats

* tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (322 commits)
  wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()
  wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig
  wifi: wilc1000: unregister wiphy only after netdev registration
  wifi: cfg80211: adjust allocation of colocated AP data
  wifi: mac80211: fix memory leak in ieee80211_mgd_assoc_ml_reconf()
  wifi: ath12k: fix key cache handling
  wifi: ath12k: Fix uninitialized variable access in ath12k_mac_allocate() function
  wifi: ath12k: Remove ath12k_get_num_hw() helper function
  wifi: ath12k: Refactor the ath12k_hw get helper function argument
  wifi: ath12k: Refactor ath12k_hw set helper function argument
  wifi: mt76: mt7996: add implicit beamforming support for mt7992
  wifi: mt76: mt7996: fix beacon command during disabling
  wifi: mt76: mt7996: fix ldpc setting
  wifi: mt76: mt7996: fix definition of tx descriptor
  wifi: mt76: connac: adjust phy capabilities based on band constraints
  wifi: mt76: mt7996: fix incorrect indexing of MIB FW event
  wifi: mt76: mt7996: fix HE Phy capability
  wifi: mt76: mt7996: fix the capability of reception of EHT MU PPDU
  wifi: mt76: mt7996: add max mpdu len capability
  wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domain
  ...
====================

Link: https://patch.msgid.link/20250117203529.72D45C4CEDD@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 28 insertions, 0 deletions

diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 6d11437596b9..f6c1b181c886 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1329,6 +1329,13 @@
  *      %NL80211_ATTR_MLO_TTLM_ULINK attributes are used to specify the
  *      TID to Link mapping for downlink/uplink traffic.
  *
+ * @NL80211_CMD_ASSOC_MLO_RECONF: For a non-AP MLD station, request to
+ *      add/remove links to/from the association.
+ *
+ * @NL80211_CMD_EPCS_CFG: EPCS configuration for a station. Used by userland to
+ *	control EPCS configuration. Used to notify userland on the current state
+ *	of EPCS.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1586,6 +1593,9 @@ enum nl80211_commands {
 
 	NL80211_CMD_SET_TID_TO_LINK_MAPPING,
 
+	NL80211_CMD_ASSOC_MLO_RECONF,
+	NL80211_CMD_EPCS_CFG,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -2871,6 +2881,18 @@ enum nl80211_commands {
  * @NL80211_ATTR_VIF_RADIO_MASK: Bitmask of allowed radios (u32).
  *	A value of 0 means all radios.
  *
+ * @NL80211_ATTR_SUPPORTED_SELECTORS: supported selectors, array of
+ *	supported selectors as defined by IEEE 802.11 7.3.2.2 but without the
+ *	length restriction (at most %NL80211_MAX_SUPP_SELECTORS).
+ *	This can be used to provide a list of selectors that are implemented
+ *	by the supplicant. If not given, support for SAE_H2E is assumed.
+ *
+ * @NL80211_ATTR_MLO_RECONF_REM_LINKS: (u16) A bitmask of the links requested
+ *      to be removed from the MLO association.
+ *
+ * @NL80211_ATTR_EPCS: Flag attribute indicating that EPCS is enabled for a
+ *	station interface.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3421,6 +3443,11 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_VIF_RADIO_MASK,
 
+	NL80211_ATTR_SUPPORTED_SELECTORS,
+
+	NL80211_ATTR_MLO_RECONF_REM_LINKS,
+	NL80211_ATTR_EPCS,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3465,6 +3492,7 @@ enum nl80211_attrs {
 #define NL80211_WIPHY_NAME_MAXLEN		64
 
 #define NL80211_MAX_SUPP_RATES			32
+#define NL80211_MAX_SUPP_SELECTORS		128
 #define NL80211_MAX_SUPP_HT_RATES		77
 #define NL80211_MAX_SUPP_REG_RULES		128
 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY	0