diff options
27 files changed, 420 insertions, 240 deletions
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index b8f3397c59c9..d4ab34b3b404 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c @@ -51,9 +51,9 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state, #define PORT(_base, _irq) \ { \ .mapbase = _base, \ + .mapsize = 0x1000, \ .irq = _irq, \ .regshift = 2, \ - .iotype = UPIO_AU, \ .flags = UPF_SKIP_TEST | UPF_IOREMAP | \ UPF_FIXED_TYPE, \ .type = PORT_16550A, \ @@ -124,8 +124,14 @@ static void __init alchemy_setup_uarts(int ctype) au1xx0_uart_device.dev.platform_data = ports; /* Fill up uartclk. */ - for (s = 0; s < c; s++) + for (s = 0; s < c; s++) { ports[s].uartclk = uartclk; + if (au_platform_setup(&ports[s]) < 0) { + kfree(ports); + printk(KERN_INFO "Alchemy: missing support for UARTs\n"); + return; + } + } if (platform_device_register(&au1xx0_uart_device)) printk(KERN_INFO "Alchemy: failed to register UARTs\n"); } diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 1e8fe44a7099..5418708f4631 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -167,12 +167,12 @@ static unsigned int __maybe_unused serial_icr_read(struct uart_8250_port *up, void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p); -static inline int serial_dl_read(struct uart_8250_port *up) +static inline u32 serial_dl_read(struct uart_8250_port *up) { return up->dl_read(up); } -static inline void serial_dl_write(struct uart_8250_port *up, int value) +static inline void serial_dl_write(struct uart_8250_port *up, u32 value) { up->dl_write(up, value); } diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 13bf535eedcd..4434c3256a92 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -488,6 +488,34 @@ static inline void serial8250_apply_quirks(struct uart_8250_port *up) up->port.quirks |= skip_txen_test ? UPQ_NO_TXEN_TEST : 0; } +static struct uart_8250_port *serial8250_setup_port(int index) +{ + struct uart_8250_port *up; + + if (index >= UART_NR) + return NULL; + + up = &serial8250_ports[index]; + up->port.line = index; + + serial8250_init_port(up); + if (!base_ops) + base_ops = up->port.ops; + up->port.ops = &univ8250_port_ops; + + timer_setup(&up->timer, serial8250_timeout, 0); + + up->ops = &univ8250_driver_ops; + + if (IS_ENABLED(CONFIG_ALPHA_JENSEN) || + (IS_ENABLED(CONFIG_ALPHA_GENERIC) && alpha_jensen())) + up->port.set_mctrl = alpha_jensen_set_mctrl; + + serial8250_set_defaults(up); + + return up; +} + static void __init serial8250_isa_init_ports(void) { struct uart_8250_port *up; @@ -501,26 +529,13 @@ static void __init serial8250_isa_init_ports(void) if (nr_uarts > UART_NR) nr_uarts = UART_NR; - for (i = 0; i < nr_uarts; i++) { - struct uart_8250_port *up = &serial8250_ports[i]; - struct uart_port *port = &up->port; - - port->line = i; - serial8250_init_port(up); - if (!base_ops) - base_ops = port->ops; - port->ops = &univ8250_port_ops; - - timer_setup(&up->timer, serial8250_timeout, 0); - - up->ops = &univ8250_driver_ops; - - if (IS_ENABLED(CONFIG_ALPHA_JENSEN) || - (IS_ENABLED(CONFIG_ALPHA_GENERIC) && alpha_jensen())) - port->set_mctrl = alpha_jensen_set_mctrl; - - serial8250_set_defaults(up); - } + /* + * Set up initial isa ports based on nr_uart module param, or else + * default to CONFIG_SERIAL_8250_RUNTIME_UARTS. Note that we do not + * need to increase nr_uarts when setting up the initial isa ports. + */ + for (i = 0; i < nr_uarts; i++) + serial8250_setup_port(i); /* chain base port ops to support Remote Supervisor Adapter */ univ8250_port_ops = *base_ops; @@ -586,16 +601,29 @@ static void univ8250_console_write(struct console *co, const char *s, static int univ8250_console_setup(struct console *co, char *options) { + struct uart_8250_port *up; struct uart_port *port; - int retval; + int retval, i; /* * Check whether an invalid uart number has been specified, and * if so, search for the first available port that does have * console support. */ - if (co->index >= nr_uarts) + if (co->index >= UART_NR) co->index = 0; + + /* + * If the console is past the initial isa ports, init more ports up to + * co->index as needed and increment nr_uarts accordingly. + */ + for (i = nr_uarts; i <= co->index; i++) { + up = serial8250_setup_port(i); + if (!up) + return -ENODEV; + nr_uarts++; + } + port = &serial8250_ports[co->index].port; /* link port to console */ port->cons = co; @@ -822,12 +850,16 @@ static int serial8250_probe(struct platform_device *dev) uart.port.iotype = p->iotype; uart.port.flags = p->flags; uart.port.mapbase = p->mapbase; + uart.port.mapsize = p->mapsize; uart.port.hub6 = p->hub6; uart.port.has_sysrq = p->has_sysrq; uart.port.private_data = p->private_data; uart.port.type = p->type; + uart.bugs = p->bugs; uart.port.serial_in = p->serial_in; uart.port.serial_out = p->serial_out; + uart.dl_read = p->dl_read; + uart.dl_write = p->dl_write; uart.port.handle_irq = p->handle_irq; uart.port.handle_break = p->handle_break; uart.port.set_termios = p->set_termios; @@ -990,7 +1022,18 @@ int serial8250_register_8250_port(const struct uart_8250_port *up) mutex_lock(&serial_mutex); uart = serial8250_find_match_or_unused(&up->port); - if (uart && uart->port.type != PORT_8250_CIR) { + if (!uart) { + /* + * If the port is past the initial isa ports, initialize a new + * port and increment nr_uarts accordingly. + */ + uart = serial8250_setup_port(nr_uarts); + if (!uart) + goto unlock; + nr_uarts++; + } + + if (uart->port.type != PORT_8250_CIR) { struct mctrl_gpios *gpios; if (uart->port.dev) @@ -1120,6 +1163,7 @@ int serial8250_register_8250_port(const struct uart_8250_port *up) } } +unlock: mutex_unlock(&serial_mutex); return ret; diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index 0ebde0ab8167..4299a8bd83d9 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -36,7 +36,6 @@ static unsigned int serial8250_early_in(struct uart_port *port, int offset) { - int reg_offset = offset; offset <<= port->regshift; switch (port->iotype) { @@ -50,8 +49,6 @@ static unsigned int serial8250_early_in(struct uart_port *port, int offset) return ioread32be(port->membase + offset); case UPIO_PORT: return inb(port->iobase + offset); - case UPIO_AU: - return port->serial_in(port, reg_offset); default: return 0; } @@ -59,7 +56,6 @@ static unsigned int serial8250_early_in(struct uart_port *port, int offset) static void serial8250_early_out(struct uart_port *port, int offset, int value) { - int reg_offset = offset; offset <<= port->regshift; switch (port->iotype) { @@ -78,9 +74,6 @@ static void serial8250_early_out(struct uart_port *port, int offset, int value) case UPIO_PORT: outb(value, port->iobase + offset); break; - case UPIO_AU: - port->serial_out(port, reg_offset, value); - break; } } @@ -199,17 +192,3 @@ OF_EARLYCON_DECLARE(omap8250, "ti,omap3-uart", early_omap8250_setup); OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup); #endif - -#ifdef CONFIG_SERIAL_8250_RT288X - -static int __init early_au_setup(struct earlycon_device *dev, const char *opt) -{ - dev->port.serial_in = au_serial_in; - dev->port.serial_out = au_serial_out; - dev->port.iotype = UPIO_AU; - dev->con->write = early_serial8250_write; - return 0; -} -OF_EARLYCON_DECLARE(palmchip, "ralink,rt2880-uart", early_au_setup); - -#endif diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c index 25a9ecf26be6..ef5019e944ea 100644 --- a/drivers/tty/serial/8250/8250_em.c +++ b/drivers/tty/serial/8250/8250_em.c @@ -139,12 +139,12 @@ static void serial8250_em_serial_out(struct uart_port *p, int offset, int value) } } -static int serial8250_em_serial_dl_read(struct uart_8250_port *up) +static u32 serial8250_em_serial_dl_read(struct uart_8250_port *up) { return serial_in(up, UART_DLL_EM) | serial_in(up, UART_DLM_EM) << 8; } -static void serial8250_em_serial_dl_write(struct uart_8250_port *up, int value) +static void serial8250_em_serial_dl_write(struct uart_8250_port *up, u32 value) { serial_out(up, UART_DLL_EM, value & 0xff); serial_out(up, UART_DLM_EM, value >> 8 & 0xff); diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index 1b461fba15a3..c9f6bd7a7038 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -171,7 +171,9 @@ static int of_platform_serial_setup(struct platform_device *ofdev, switch (type) { case PORT_RT2880: - port->iotype = UPIO_AU; + ret = rt288x_setup(port); + if (ret) + goto err_unprepare; break; } diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 734f092ef839..5c093dfcee1d 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -32,6 +32,7 @@ #include "8250.h" #define DEFAULT_CLK_SPEED 48000000 +#define OMAP_UART_REGSHIFT 2 #define UART_ERRATA_i202_MDR1_ACCESS (1 << 0) #define OMAP_UART_WER_HAS_TX_WAKEUP (1 << 1) @@ -115,6 +116,7 @@ #define UART_OMAP_RX_LVL 0x19 struct omap8250_priv { + void __iomem *membase; int line; u8 habit; u8 mdr1; @@ -159,9 +161,14 @@ static void omap_8250_rx_dma_flush(struct uart_8250_port *p); static inline void omap_8250_rx_dma_flush(struct uart_8250_port *p) { } #endif -static u32 uart_read(struct uart_8250_port *up, u32 reg) +static u32 uart_read(struct omap8250_priv *priv, u32 reg) +{ + return readl(priv->membase + (reg << OMAP_UART_REGSHIFT)); +} + +static void uart_write(struct omap8250_priv *priv, u32 reg, u32 val) { - return readl(up->port.membase + (reg << up->port.regshift)); + writel(val, priv->membase + (reg << OMAP_UART_REGSHIFT)); } /* @@ -548,7 +555,7 @@ static void omap_serial_fill_features_erratas(struct uart_8250_port *up, u32 mvr, scheme; u16 revision, major, minor; - mvr = uart_read(up, UART_OMAP_MVER); + mvr = uart_read(priv, UART_OMAP_MVER); /* Check revision register scheme */ scheme = mvr >> OMAP_UART_MVR_SCHEME_SHIFT; @@ -616,9 +623,9 @@ static int omap_8250_dma_handle_irq(struct uart_port *port); static irqreturn_t omap8250_irq(int irq, void *dev_id) { - struct uart_port *port = dev_id; - struct omap8250_priv *priv = port->private_data; - struct uart_8250_port *up = up_to_u8250p(port); + struct omap8250_priv *priv = dev_id; + struct uart_8250_port *up = serial8250_get_port(priv->line); + struct uart_port *port = &up->port; unsigned int iir, lsr; int ret; @@ -672,6 +679,7 @@ static int omap_8250_startup(struct uart_port *port) { struct uart_8250_port *up = up_to_u8250p(port); struct omap8250_priv *priv = port->private_data; + struct uart_8250_dma *dma = &priv->omap8250_dma; int ret; if (priv->wakeirq) { @@ -690,23 +698,18 @@ static int omap_8250_startup(struct uart_port *port) up->msr_saved_flags = 0; /* Disable DMA for console UART */ - if (uart_console(port)) - up->dma = NULL; - - if (up->dma) { + if (dma->fn && !uart_console(port)) { + up->dma = &priv->omap8250_dma; ret = serial8250_request_dma(up); if (ret) { dev_warn_ratelimited(port->dev, "failed to request DMA\n"); up->dma = NULL; } + } else { + up->dma = NULL; } - ret = request_irq(port->irq, omap8250_irq, IRQF_SHARED, - dev_name(port->dev), port); - if (ret < 0) - goto err; - up->ier = UART_IER_RLSI | UART_IER_RDI; serial_out(up, UART_IER, up->ier); @@ -723,14 +726,11 @@ static int omap_8250_startup(struct uart_port *port) if (up->dma && !(priv->habit & UART_HAS_EFR2)) up->dma->rx_dma(up); + enable_irq(up->port.irq); + pm_runtime_mark_last_busy(port->dev); pm_runtime_put_autosuspend(port->dev); return 0; -err: - pm_runtime_mark_last_busy(port->dev); - pm_runtime_put_autosuspend(port->dev); - dev_pm_clear_wake_irq(port->dev); - return ret; } static void omap_8250_shutdown(struct uart_port *port) @@ -750,9 +750,11 @@ static void omap_8250_shutdown(struct uart_port *port) up->ier = 0; serial_out(up, UART_IER, 0); + disable_irq_nosync(up->port.irq); + dev_pm_clear_wake_irq(port->dev); - if (up->dma) - serial8250_release_dma(up); + serial8250_release_dma(up); + up->dma = NULL; /* * Disable break condition and FIFOs @@ -763,8 +765,6 @@ static void omap_8250_shutdown(struct uart_port *port) pm_runtime_mark_last_busy(port->dev); pm_runtime_put_autosuspend(port->dev); - free_irq(port->irq, port); - dev_pm_clear_wake_irq(port->dev); } static void omap_8250_throttle(struct uart_port *port) @@ -1394,7 +1394,7 @@ static int omap8250_probe(struct platform_device *pdev) UPF_HARD_FLOW; up.port.private_data = priv; - up.port.regshift = 2; + up.port.regshift = OMAP_UART_REGSHIFT; up.port.fifosize = 64; up.tx_loadsz = 64; up.capabilities = UART_CAP_FIFO; @@ -1444,8 +1444,6 @@ static int omap8250_probe(struct platform_device *pdev) &up.overrun_backoff_time_ms) != 0) up.overrun_backoff_time_ms = 0; - priv->wakeirq = irq_of_parse_and_map(np, 1); - pdata = of_device_get_match_data(&pdev->dev); if (pdata) priv->habit |= pdata->habit; @@ -1457,6 +1455,8 @@ static int omap8250_probe(struct platform_device *pdev) DEFAULT_CLK_SPEED); } + priv->membase = membase; + priv->line = -ENODEV; priv->latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE; priv->calc_latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE; cpu_latency_qos_add_request(&priv->pm_qos_request, priv->latency); @@ -1464,6 +1464,8 @@ static int omap8250_probe(struct platform_device *pdev) spin_lock_init(&priv->rx_dma_lock); + platform_set_drvdata(pdev, priv); + device_init_wakeup(&pdev->dev, true); pm_runtime_enable(&pdev->dev); pm_runtime_use_autosuspend(&pdev->dev); @@ -1498,58 +1500,72 @@ static int omap8250_probe(struct platform_device *pdev) ret = of_property_count_strings(np, "dma-names"); if (ret == 2) { struct omap8250_dma_params *dma_params = NULL; + struct uart_8250_dma *dma = &priv->omap8250_dma; - up.dma = &priv->omap8250_dma; - up.dma->fn = the_no_dma_filter_fn; - up.dma->tx_dma = omap_8250_tx_dma; - up.dma->rx_dma = omap_8250_rx_dma; + dma->fn = the_no_dma_filter_fn; + dma->tx_dma = omap_8250_tx_dma; + dma->rx_dma = omap_8250_rx_dma; if (pdata) dma_params = pdata->dma_params; if (dma_params) { - up.dma->rx_size = dma_params->rx_size; - up.dma->rxconf.src_maxburst = dma_params->rx_trigger; - up.dma->txconf.dst_maxburst = dma_params->tx_trigger; + dma->rx_size = dma_params->rx_size; + dma->rxconf.src_maxburst = dma_params->rx_trigger; + dma->txconf.dst_maxburst = dma_params->tx_trigger; priv->rx_trigger = dma_params->rx_trigger; priv->tx_trigger = dma_params->tx_trigger; } else { - up.dma->rx_size = RX_TRIGGER; - up.dma->rxconf.src_maxburst = RX_TRIGGER; - up.dma->txconf.dst_maxburst = TX_TRIGGER; + dma->rx_size = RX_TRIGGER; + dma->rxconf.src_maxburst = RX_TRIGGER; + dma->txconf.dst_maxburst = TX_TRIGGER; } } #endif + + irq_set_status_flags(irq, IRQ_NOAUTOEN); + ret = devm_request_irq(&pdev->dev, irq, omap8250_irq, 0, + dev_name(&pdev->dev), priv); + if (ret < 0) + return ret; + + priv->wakeirq = irq_of_parse_and_map(np, 1); + ret = serial8250_register_8250_port(&up); if (ret < 0) { dev_err(&pdev->dev, "unable to register 8250 port\n"); goto err; } priv->line = ret; - platform_set_drvdata(pdev, priv); pm_runtime_mark_last_busy(&pdev->dev); pm_runtime_put_autosuspend(&pdev->dev); return 0; err: pm_runtime_dont_use_autosuspend(&pdev->dev); pm_runtime_put_sync(&pdev->dev); + flush_work(&priv->qos_work); pm_runtime_disable(&pdev->dev); + cpu_latency_qos_remove_request(&priv->pm_qos_request); return ret; } static int omap8250_remove(struct platform_device *pdev) { struct omap8250_priv *priv = platform_get_drvdata(pdev); + struct uart_8250_port *up; int err; err = pm_runtime_resume_and_get(&pdev->dev); if (err) return err; + up = serial8250_get_port(priv->line); + omap_8250_shutdown(&up->port); + serial8250_unregister_port(priv->line); + priv->line = -ENODEV; pm_runtime_dont_use_autosuspend(&pdev->dev); pm_runtime_put_sync(&pdev->dev); flush_work(&priv->qos_work); pm_runtime_disable(&pdev->dev); - serial8250_unregister_port(priv->line); cpu_latency_qos_remove_request(&priv->pm_qos_request); device_init_wakeup(&pdev->dev, false); return 0; @@ -1625,7 +1641,6 @@ static int omap8250_lost_context(struct uart_8250_port *up) static int omap8250_soft_reset(struct device *dev) { struct omap8250_priv *priv = dev_get_drvdata(dev); - struct uart_8250_port *up = serial8250_get_port(priv->line); int timeout = 100; int sysc; int syss; @@ -1639,20 +1654,20 @@ static int omap8250_soft_reset(struct device *dev) * needing omap8250_soft_reset() quirk. Do it in two writes as * recommended in the comment for omap8250_update_scr(). */ - serial_out(up, UART_OMAP_SCR, OMAP_UART_SCR_DMAMODE_1); - serial_out(up, UART_OMAP_SCR, + uart_write(priv, UART_OMAP_SCR, OMAP_UART_SCR_DMAMODE_1); + uart_write(priv, UART_OMAP_SCR, OMAP_UART_SCR_DMAMODE_1 | OMAP_UART_SCR_DMAMODE_CTL); - sysc = serial_in(up, UART_OMAP_SYSC); + sysc = uart_read(priv, UART_OMAP_SYSC); /* softreset the UART */ sysc |= OMAP_UART_SYSC_SOFTRESET; - serial_out(up, UART_OMAP_SYSC, sysc); + uart_write(priv, UART_OMAP_SYSC, sysc); /* By experiments, 1us enough for reset complete on AM335x */ do { udelay(1); - syss = serial_in(up, UART_OMAP_SYSS); + syss = uart_read(priv, UART_OMAP_SYSS); } while (--timeout && !(syss & OMAP_UART_SYSS_RESETDONE)); if (!timeout) { @@ -1666,13 +1681,10 @@ static int omap8250_soft_reset(struct device *dev) static int omap8250_runtime_suspend(struct device *dev) { struct omap8250_priv *priv = dev_get_drvdata(dev); - struct uart_8250_port *up; + struct uart_8250_port *up = NULL; - /* In case runtime-pm tries this before we are setup */ - if (!priv) - return 0; - - up = serial8250_get_port(priv->line); + if (priv->line >= 0) + up = serial8250_get_port(priv->line); /* * When using 'no_console_suspend', the console UART must not be * suspended. Since driver suspend is managed by runtime suspend, @@ -1680,7 +1692,7 @@ static int omap8250_runtime_suspend(struct device *dev) * active during suspend. */ if (priv->is_suspending && !console_suspend_enabled) { - if (uart_console(&up->port)) + if (up && uart_console(&up->port)) return -EBUSY; } @@ -1691,13 +1703,15 @@ static int omap8250_runtime_suspend(struct device *dev) if (ret) return ret; - /* Restore to UART mode after reset (for wakeup) */ - omap8250_update_mdr1(up, priv); - /* Restore wakeup enable register */ - serial_out(up, UART_OMAP_WER, priv->wer); + if (up) { + /* Restore to UART mode after reset (for wakeup) */ + omap8250_update_mdr1(up, priv); + /* Restore wakeup enable register */ + serial_out(up, UART_OMAP_WER, priv->wer); + } } - if (up->dma && up->dma->rxchan) + if (up && up->dma && up->dma->rxchan) omap_8250_rx_dma_flush(up); priv->latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE; @@ -1709,18 +1723,15 @@ static int omap8250_runtime_suspend(struct device *dev) static int omap8250_runtime_resume(struct device *dev) { struct omap8250_priv *priv = dev_get_drvdata(dev); - struct uart_8250_port *up; - - /* In case runtime-pm tries this before we are setup */ - if (!priv) - return 0; + struct uart_8250_port *up = NULL; - up = serial8250_get_port(priv->line); + if (priv->line >= 0) + up = serial8250_get_port(priv->line); - if (omap8250_lost_context(up)) + if (up && omap8250_lost_context(up)) omap8250_restore_regs(up); - if (up->dma && up->dma->rxchan && !(priv->habit & UART_HAS_EFR2)) + if (up && up->dma && up->dma->rxchan && !(priv->habit & UART_HAS_EFR2)) omap_8250_rx_dma(up); priv->latency = priv->calc_latency; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index c153ba3a018a..2d8f87f4e40f 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -325,7 +325,7 @@ static const struct serial8250_config uart_config[] = { }; /* Uart divisor latch read */ -static int default_serial_dl_read(struct uart_8250_port *up) +static u32 default_serial_dl_read(struct uart_8250_port *up) { /* Assign these in pieces to truncate any bits above 7. */ unsigned char dll = serial_in(up, UART_DLL); @@ -335,72 +335,12 @@ static int default_serial_dl_read(struct uart_8250_port *up) } /* Uart divisor latch write */ -static void default_serial_dl_write(struct uart_8250_port *up, int value) +static void default_serial_dl_write(struct uart_8250_port *up, u32 value) { serial_out(up, UART_DLL, value & 0xff); serial_out(up, UART_DLM, value >> 8 & 0xff); } -#ifdef CONFIG_SERIAL_8250_RT288X - -#define UART_REG_UNMAPPED -1 - -/* Au1x00/RT288x UART hardware has a weird register layout */ -static const s8 au_io_in_map[8] = { - [UART_RX] = 0, - [UART_IER] = 2, - [UART_IIR] = 3, - [UART_LCR] = 5, - [UART_MCR] = 6, - [UART_LSR] = 7, - [UART_MSR] = 8, - [UART_SCR] = UART_REG_UNMAPPED, -}; - -static const s8 au_io_out_map[8] = { - [UART_TX] = 1, - [UART_IER] = 2, - [UART_FCR] = 4, - [UART_LCR] = 5, - [UART_MCR] = 6, - [UART_LSR] = UART_REG_UNMAPPED, - [UART_MSR] = UART_REG_UNMAPPED, - [UART_SCR] = UART_REG_UNMAPPED, -}; - -unsigned int au_serial_in(struct uart_port *p, int offset) -{ - if (offset >= ARRAY_SIZE(au_io_in_map)) - return UINT_MAX; - offset = au_io_in_map[offset]; - if (offset == UART_REG_UNMAPPED) - return UINT_MAX; - return __raw_readl(p->membase + (offset << p->regshift)); -} - -void au_serial_out(struct uart_port *p, int offset, int value) -{ - if (offset >= ARRAY_SIZE(au_io_out_map)) - return; - offset = au_io_out_map[offset]; - if (offset == UART_REG_UNMAPPED) - return; - __raw_writel(value, p->membase + (offset << p->regshift)); -} - -/* Au1x00 haven't got a standard divisor latch */ -static int au_serial_dl_read(struct uart_8250_port *up) -{ - return __raw_readl(up->port.membase + 0x28); -} - -static void au_serial_dl_write(struct uart_8250_port *up, int value) -{ - __raw_writel(value, up->port.membase + 0x28); -} - -#endif - static unsigned int hub6_serial_in(struct uart_port *p, int offset) { offset = offset << p->regshift; @@ -510,15 +450,6 @@ static void set_io_from_upio(struct uart_port *p) p->serial_out = mem32be_serial_out; break; -#ifdef CONFIG_SERIAL_8250_RT288X - case UPIO_AU: - p->serial_in = au_serial_in; - p->serial_out = au_serial_out; - up->dl_read = au_serial_dl_read; - up->dl_write = au_serial_dl_write; - break; -#endif - default: p->serial_in = io_serial_in; p->serial_out = io_serial_out; @@ -848,7 +779,7 @@ static void disable_rsa(struct uart_8250_port *up) static int size_fifo(struct uart_8250_port *up) { unsigned char old_fcr, old_mcr, old_lcr; - unsigned short old_dl; + u32 old_dl; int count; old_lcr = serial_in(up, UART_LCR); @@ -2969,11 +2900,6 @@ static unsigned int serial8250_port_size(struct uart_8250_port *pt) { if (pt->port.mapsize) return pt->port.mapsize; - if (pt->port.iotype == UPIO_AU) { - if (pt->port.type == PORT_RT2880) - return 0x100; - return 0x1000; - } if (is_omap1_8250(pt)) return 0x16 << pt->port.regshift; @@ -3223,10 +3149,6 @@ static void serial8250_config_port(struct uart_port *port, int flags) if (flags & UART_CONFIG_TYPE) autoconfig(up); - /* if access method is AU, it is a 16550 with a quirk */ - if (port->type == PORT_16550A && port->iotype == UPIO_AU) - up->bugs |= UART_BUG_NOMSR; - /* HW bugs may trigger IRQ while IIR == NO_INT */ if (port->type == PORT_TEGRA) up->bugs |= UART_BUG_NOMSR; diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c index 795e55142d4c..28b341f602c6 100644 --- a/drivers/tty/serial/8250/8250_pxa.c +++ b/drivers/tty/serial/8250/8250_pxa.c @@ -60,7 +60,7 @@ static const struct of_device_id serial_pxa_dt_ids[] = { MODULE_DEVICE_TABLE(of, serial_pxa_dt_ids); /* Uart divisor latch write */ -static void serial_pxa_dl_write(struct uart_8250_port *up, int value) +static void serial_pxa_dl_write(struct uart_8250_port *up, u32 value) { unsigned int dll; diff --git a/drivers/tty/serial/8250/8250_rt288x.c b/drivers/tty/serial/8250/8250_rt288x.c new file mode 100644 index 000000000000..6415ca8d3adf --- /dev/null +++ b/drivers/tty/serial/8250/8250_rt288x.c @@ -0,0 +1,136 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * RT288x/Au1xxx driver + */ + +#include <linux/module.h> +#include <linux/io.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> + +#include "8250.h" + +#define RT288X_DL 0x28 + +/* Au1x00/RT288x UART hardware has a weird register layout */ +static const u8 au_io_in_map[7] = { + [UART_RX] = 0, + [UART_IER] = 2, + [UART_IIR] = 3, + [UART_LCR] = 5, + [UART_MCR] = 6, + [UART_LSR] = 7, + [UART_MSR] = 8, +}; + +static const u8 au_io_out_map[5] = { + [UART_TX] = 1, + [UART_IER] = 2, + [UART_FCR] = 4, + [UART_LCR] = 5, + [UART_MCR] = 6, +}; + +static unsigned int au_serial_in(struct uart_port *p, int offset) +{ + if (offset >= ARRAY_SIZE(au_io_in_map)) + return UINT_MAX; + offset = au_io_in_map[offset]; + + return __raw_readl(p->membase + (offset << p->regshift)); +} + +static void au_serial_out(struct uart_port *p, int offset, int value) +{ + if (offset >= ARRAY_SIZE(au_io_out_map)) + return; + offset = au_io_out_map[offset]; + + __raw_writel(value, p->membase + (offset << p->regshift)); +} + +/* Au1x00 haven't got a standard divisor latch */ +static u32 au_serial_dl_read(struct uart_8250_port *up) +{ + return __raw_readl(up->port.membase + RT288X_DL); +} + +static void au_serial_dl_write(struct uart_8250_port *up, u32 value) +{ + __raw_writel(value, up->port.membase + RT288X_DL); +} + +int au_platform_setup(struct plat_serial8250_port *p) +{ + p->iotype = UPIO_AU; + + p->serial_in = au_serial_in; + p->serial_out = au_serial_out; + p->dl_read = au_serial_dl_read; + p->dl_write = au_serial_dl_write; + + p->mapsize = 0x1000; + + p->bugs |= UART_BUG_NOMSR; + + return 0; +} +EXPORT_SYMBOL_GPL(au_platform_setup); + +int rt288x_setup(struct uart_port *p) +{ + struct uart_8250_port *up = up_to_u8250p(p); + + p->iotype = UPIO_AU; + + p->serial_in = au_serial_in; + p->serial_out = au_serial_out; + up->dl_read = au_serial_dl_read; + up->dl_write = au_serial_dl_write; + + p->mapsize = 0x100; + + up->bugs |= UART_BUG_NOMSR; + + return 0; +} +EXPORT_SYMBOL_GPL(rt288x_setup); + +#ifdef CONFIG_SERIAL_8250_CONSOLE +static void au_putc(struct uart_port *port, unsigned char c) +{ + unsigned int status; + + au_serial_out(port, UART_TX, c); + + for (;;) { + status = au_serial_in(port, UART_LSR); + if (uart_lsr_tx_empty(status)) + break; + cpu_relax(); + } +} + +static void au_early_serial8250_write(struct console *console, + const char *s, unsigned int count) +{ + struct earlycon_device *device = console->data; + struct uart_port *port = &device->port; + + uart_console_write(port, s, count, au_putc); +} + +static int __init early_au_setup(struct earlycon_device *dev, const char *opt) +{ + rt288x_setup(&dev->port); + dev->con->write = au_early_serial8250_write; + + return 0; +} +OF_EARLYCON_DECLARE(palmchip, "ralink,rt2880-uart", early_au_setup); +#endif + +MODULE_DESCRIPTION("RT288x/Au1xxx UART driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c index a2978abab0db..a405155264b1 100644 --- a/drivers/tty/serial/8250/8250_uniphier.c +++ b/drivers/tty/serial/8250/8250_uniphier.c @@ -145,12 +145,12 @@ static void uniphier_serial_out(struct uart_port *p, int offset, int value) * The divisor latch register exists at different address. * Override dl_read/write callbacks. */ -static int uniphier_serial_dl_read(struct uart_8250_port *up) +static u32 uniphier_serial_dl_read(struct uart_8250_port *up) { return readl(up->port.membase + UNIPHIER_UART_DLR); } -static void uniphier_serial_dl_write(struct uart_8250_port *up, int value) +static void uniphier_serial_dl_write(struct uart_8250_port *up, u32 value) { writel(value, up->port.membase + UNIPHIER_UART_DLR); } diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index 4fc2fc1f41b6..628b75be312e 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o obj-$(CONFIG_SERIAL_8250_IOC3) += 8250_ioc3.o obj-$(CONFIG_SERIAL_8250_OMAP) += 8250_omap.o +obj-$(CONFIG_SERIAL_8250_RT288X) += 8250_rt288x.o obj-$(CONFIG_SERIAL_8250_LPC18XX) += 8250_lpc18xx.o obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o obj-$(CONFIG_SERIAL_8250_UNIPHIER) += 8250_uniphier.o diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index cd9afd9e3018..531ec3a19dae 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -21,7 +21,7 @@ obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o obj-$(CONFIG_SERIAL_21285) += 21285.o # Now bring in any enabled 8250/16450/16550 type drivers. -obj-$(CONFIG_SERIAL_8250) += 8250/ +obj-y += 8250/ obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index d8c2f3455eeb..c5c3f4674459 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -2166,6 +2166,13 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, * ----------^----------^----------^----------^----- */ pl011_write_lcr_h(uap, lcr_h); + + /* + * Receive was disabled by pl011_disable_uart during shutdown. + * Need to reenable receive if you need to use a tty_driver + * returns from tty_find_polling_driver() after a port shutdown. + */ + old_cr |= UART011_CR_RXE; pl011_write(old_cr, uap, REG_CR); spin_unlock_irqrestore(&port->lock, flags); diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 9cd7479b03c0..6e9192f122aa 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -3006,14 +3006,13 @@ static int atmel_serial_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - int ret = 0; tasklet_kill(&atmel_port->tasklet_rx); tasklet_kill(&atmel_port->tasklet_tx); device_init_wakeup(&pdev->dev, 0); - ret = uart_remove_one_port(&atmel_uart, port); + uart_remove_one_port(&atmel_uart, port); kfree(atmel_port->rx_ring.buf); @@ -3023,7 +3022,7 @@ static int atmel_serial_remove(struct platform_device *pdev) pdev->dev.of_node = NULL; - return ret; + return 0; } static SIMPLE_DEV_PM_OPS(atmel_serial_pm_ops, atmel_serial_suspend, diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c index e190dce58f46..e49bc4019b50 100644 --- a/drivers/tty/serial/clps711x.c +++ b/drivers/tty/serial/clps711x.c @@ -514,7 +514,9 @@ static int uart_clps711x_remove(struct platform_device *pdev) { struct clps711x_port *s = platform_get_drvdata(pdev); - return uart_remove_one_port(&clps711x_uart, &s->port); + uart_remove_one_port(&clps711x_uart, &s->port); + + return 0; } static const struct of_device_id __maybe_unused clps711x_uart_dt_ids[] = { diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index 349e7da643f0..66afa9bea6bf 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -1431,7 +1431,10 @@ static int cpm_uart_probe(struct platform_device *ofdev) static int cpm_uart_remove(struct platform_device *ofdev) { struct uart_cpm_port *pinfo = platform_get_drvdata(ofdev); - return uart_remove_one_port(&cpm_reg, &pinfo->port); + + uart_remove_one_port(&cpm_reg, &pinfo->port); + + return 0; } static const struct of_device_id cpm_uart_match[] = { diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index c91916e13648..0e56fa64b4ce 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -238,6 +238,7 @@ /* Rx DMA timeout in ms, which is used to calculate Rx ring buffer size */ #define DMA_RX_TIMEOUT (10) +#define DMA_RX_IDLE_CHARS 8 #define UART_AUTOSUSPEND_TIMEOUT 3000 #define DRIVER_NAME "fsl-lpuart" @@ -282,6 +283,7 @@ struct lpuart_port { struct scatterlist rx_sgl, tx_sgl[2]; struct circ_buf rx_ring; int rx_dma_rng_buf_len; + int last_residue; unsigned int dma_tx_nents; wait_queue_head_t dma_wait; bool is_cs7; /* Set to true when character size is 7 */ @@ -331,7 +333,7 @@ static struct lpuart_soc_data imx8qxp_data = { .devtype = IMX8QXP_LPUART, .iotype = UPIO_MEM32, .reg_off = IMX_REG_OFF, - .rx_watermark = 31, + .rx_watermark = 7, /* A lower watermark is ideal for low baud rates. */ }; static struct lpuart_soc_data imxrt1050_data = { .devtype = IMXRT1050_LPUART, @@ -1255,6 +1257,8 @@ static void lpuart_copy_rx_to_tty(struct lpuart_port *sport) sport->port.icount.rx += copied; } + sport->last_residue = state.residue; + exit: dma_sync_sg_for_device(chan->device->dev, &sport->rx_sgl, 1, DMA_FROM_DEVICE); @@ -1272,11 +1276,37 @@ static void lpuart_dma_rx_complete(void *arg) lpuart_copy_rx_to_tty(sport); } +/* + * Timer function to simulate the hardware EOP (End Of Package) event. + * The timer callback is to check for new RX data and copy to TTY buffer. + * If no new data are received since last interval, the EOP condition is + * met, complete the DMA transfer by copying the data. Otherwise, just + * restart timer. + */ static void lpuart_timer_func(struct timer_list *t) { struct lpuart_port *sport = from_timer(sport, t, lpuart_timer); + struct dma_chan *chan = sport->dma_rx_chan; + struct circ_buf *ring = &sport->rx_ring; + struct dma_tx_state state; + unsigned long flags; + int count; - lpuart_copy_rx_to_tty(sport); + dmaengine_tx_status(chan, sport->dma_rx_cookie, &state); + ring->head = sport->rx_sgl.length - state.residue; + count = CIRC_CNT(ring->head, ring->tail, sport->rx_sgl.length); + + /* Check if new data received before copying */ + if ((count != 0) && (sport->last_residue == state.residue)) + lpuart_copy_rx_to_tty(sport); + else + mod_timer(&sport->lpuart_timer, + jiffies + sport->dma_rx_timeout); + + if (spin_trylock_irqsave(&sport->port.lock, flags)) { + sport->last_residue = state.residue; + spin_unlock_irqrestore(&sport->port.lock, flags); + } } static inline int lpuart_start_rx_dma(struct lpuart_port *sport) @@ -1297,9 +1327,20 @@ static inline int lpuart_start_rx_dma(struct lpuart_port *sport) */ sport->rx_dma_rng_buf_len = (DMA_RX_TIMEOUT * baud / bits / 1000) * 2; sport->rx_dma_rng_buf_len = (1 << fls(sport->rx_dma_rng_buf_len)); + sport->rx_dma_rng_buf_len = max_t(int, + sport->rxfifo_size * 2, + sport->rx_dma_rng_buf_len); + /* + * Keep this condition check in case rxfifo_size is unavailable + * for some SoCs. + */ if (sport->rx_dma_rng_buf_len < 16) sport->rx_dma_rng_buf_len = 16; + sport->last_residue = 0; + sport->dma_rx_timeout = max(nsecs_to_jiffies( + sport->port.frame_time * DMA_RX_IDLE_CHARS), 1UL); + ring->buf = kzalloc(sport->rx_dma_rng_buf_len, GFP_ATOMIC); if (!ring->buf) return -ENOMEM; @@ -1687,12 +1728,13 @@ static void lpuart_rx_dma_startup(struct lpuart_port *sport) if (!sport->dma_rx_chan) goto err; + /* set default Rx DMA timeout */ + sport->dma_rx_timeout = msecs_to_jiffies(DMA_RX_TIMEOUT); + ret = lpuart_start_rx_dma(sport); if (ret) goto err; - /* set Rx DMA timeout */ - sport->dma_rx_timeout = msecs_to_jiffies(DMA_RX_TIMEOUT); if (!sport->dma_rx_timeout) sport->dma_rx_timeout = 1; diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index c5e17569c3ad..b2bf3cb449f4 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -2467,7 +2467,9 @@ static int imx_uart_remove(struct platform_device *pdev) { struct imx_port *sport = platform_get_drvdata(pdev); - return uart_remove_one_port(&imx_uart_uart_driver, &sport->port); + uart_remove_one_port(&imx_uart_uart_driver, &sport->port); + + return 0; } static void imx_uart_restore_context(struct imx_port *sport) diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c index a58e9277dfad..d413f97f7190 100644 --- a/drivers/tty/serial/lantiq.c +++ b/drivers/tty/serial/lantiq.c @@ -889,7 +889,9 @@ static int lqasc_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); - return uart_remove_one_port(&lqasc_reg, port); + uart_remove_one_port(&lqasc_reg, port); + + return 0; } static const struct ltq_soc_data soc_data_lantiq = { diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 54e82f476a2c..4b98d13555c0 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -3154,13 +3154,12 @@ EXPORT_SYMBOL(uart_add_one_port); * This unhooks (and hangs up) the specified port structure from the core * driver. No further calls will be made to the low-level code for this port. */ -int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) +void uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) { struct uart_state *state = drv->state + uport->line; struct tty_port *port = &state->port; struct uart_port *uart_port; struct tty_struct *tty; - int ret = 0; mutex_lock(&port_mutex); @@ -3176,7 +3175,6 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) if (!uart_port) { mutex_unlock(&port->mutex); - ret = -EINVAL; goto out; } uport->flags |= UPF_DEAD; @@ -3219,8 +3217,6 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) mutex_unlock(&port->mutex); out: mutex_unlock(&port_mutex); - - return ret; } EXPORT_SYMBOL(uart_remove_one_port); diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index 5215e6910f68..dc2f2051435c 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -796,7 +796,9 @@ static int asc_serial_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); - return uart_remove_one_port(&asc_uart_driver, port); + uart_remove_one_port(&asc_uart_driver, port); + + return 0; } #ifdef CONFIG_PM_SLEEP diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 1e38fc9b10c1..e9e11a259621 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -1755,13 +1755,10 @@ static int stm32_usart_serial_remove(struct platform_device *pdev) struct uart_port *port = platform_get_drvdata(pdev); struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; - int err; u32 cr3; pm_runtime_get_sync(&pdev->dev); - err = uart_remove_one_port(&stm32_usart_driver, port); - if (err) - return(err); + uart_remove_one_port(&stm32_usart_driver, port); pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index 94584e54ebbe..679574893ebe 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -685,18 +685,15 @@ static int ulite_assign(struct device *dev, int id, phys_addr_t base, int irq, * * @dev: pointer to device structure */ -static int ulite_release(struct device *dev) +static void ulite_release(struct device *dev) { struct uart_port *port = dev_get_drvdata(dev); - int rc = 0; if (port) { - rc = uart_remove_one_port(&ulite_uart_driver, port); + uart_remove_one_port(&ulite_uart_driver, port); dev_set_drvdata(dev, NULL); port->mapbase = 0; } - - return rc; } /** @@ -900,14 +897,13 @@ static int ulite_remove(struct platform_device *pdev) { struct uart_port *port = dev_get_drvdata(&pdev->dev); struct uartlite_data *pdata = port->private_data; - int rc; clk_disable_unprepare(pdata->clk); - rc = ulite_release(&pdev->dev); + ulite_release(&pdev->dev); pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); pm_runtime_dont_use_autosuspend(&pdev->dev); - return rc; + return 0; } /* work with hotplug and coldplug */ diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 8e521c69a959..20a751663ef9 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1670,14 +1670,13 @@ static int cdns_uart_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); struct cdns_uart *cdns_uart_data = port->private_data; - int rc; /* Remove the cdns_uart port from the serial core */ #ifdef CONFIG_COMMON_CLK clk_notifier_unregister(cdns_uart_data->uartclk, &cdns_uart_data->clk_rate_change_nb); #endif - rc = uart_remove_one_port(cdns_uart_data->cdns_uart_driver, port); + uart_remove_one_port(cdns_uart_data->cdns_uart_driver, port); port->mapbase = 0; clk_disable_unprepare(cdns_uart_data->uartclk); clk_disable_unprepare(cdns_uart_data->pclk); @@ -1693,7 +1692,7 @@ static int cdns_uart_remove(struct platform_device *pdev) if (!--instances) uart_unregister_driver(cdns_uart_data->cdns_uart_driver); - return rc; + return 0; } static struct platform_driver cdns_uart_platform_driver = { diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index 6f78f302d272..eb44420b39ec 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -7,17 +7,34 @@ #ifndef _LINUX_SERIAL_8250_H #define _LINUX_SERIAL_8250_H +#include <linux/errno.h> #include <linux/serial_core.h> #include <linux/serial_reg.h> #include <linux/platform_device.h> +struct uart_8250_port; + /* * This is the platform device platform_data structure + * + * @mapsize: Port size for ioremap() + * @bugs: Port bugs + * + * @dl_read: ``u32 ()(struct uart_8250_port *up)`` + * + * UART divisor latch read. + * + * @dl_write: ``void ()(struct uart_8250_port *up, u32 value)`` + * + * Write @value into UART divisor latch. + * + * Locking: Caller holds port's lock. */ struct plat_serial8250_port { unsigned long iobase; /* io base address */ void __iomem *membase; /* ioremap cookie or NULL */ resource_size_t mapbase; /* resource base */ + resource_size_t mapsize; unsigned int uartclk; /* UART clock rate */ unsigned int irq; /* interrupt number */ unsigned long irqflags; /* request_irq flags */ @@ -28,8 +45,11 @@ struct plat_serial8250_port { unsigned char has_sysrq; /* supports magic SysRq */ unsigned int type; /* If UPF_FIXED_TYPE */ upf_t flags; /* UPF_* flags */ + u16 bugs; /* port bugs */ unsigned int (*serial_in)(struct uart_port *, int); void (*serial_out)(struct uart_port *, int, int); + u32 (*dl_read)(struct uart_8250_port *up); + void (*dl_write)(struct uart_8250_port *up, u32 value); void (*set_termios)(struct uart_port *, struct ktermios *new, const struct ktermios *old); @@ -90,14 +110,23 @@ struct uart_8250_em485 { * their own 8250 ports without registering their own * platform device. Using these will make your driver * dependent on the 8250 driver. + * + * @dl_read: ``u32 ()(struct uart_8250_port *port)`` + * + * UART divisor latch read. + * + * @dl_write: ``void ()(struct uart_8250_port *port, u32 value)`` + * + * Write @value into UART divisor latch. + * + * Locking: Caller holds port's lock. */ - struct uart_8250_port { struct uart_port port; struct timer_list timer; /* "no irq" timer */ struct list_head list; /* ports on this IRQ */ u32 capabilities; /* port capabilities */ - unsigned short bugs; /* port bugs */ + u16 bugs; /* port bugs */ bool fifo_bug; /* min RX trigger if enabled */ unsigned int tx_loadsz; /* transmit fifo load size */ unsigned char acr; @@ -129,8 +158,8 @@ struct uart_8250_port { const struct uart_8250_ops *ops; /* 8250 specific callbacks */ - int (*dl_read)(struct uart_8250_port *); - void (*dl_write)(struct uart_8250_port *, int); + u32 (*dl_read)(struct uart_8250_port *up); + void (*dl_write)(struct uart_8250_port *up, u32 value); struct uart_8250_em485 *em485; void (*rs485_start_tx)(struct uart_8250_port *); @@ -183,8 +212,11 @@ void serial8250_set_isa_configurator(void (*v)(int port, struct uart_port *up, u32 *capabilities)); #ifdef CONFIG_SERIAL_8250_RT288X -unsigned int au_serial_in(struct uart_port *p, int offset); -void au_serial_out(struct uart_port *p, int offset, int value); +int rt288x_setup(struct uart_port *p); +int au_platform_setup(struct plat_serial8250_port *p); +#else +static inline int rt288x_setup(struct uart_port *p) { return -ENODEV; } +static inline int au_platform_setup(struct plat_serial8250_port *p) { return -ENODEV; } #endif #endif diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 66ecec15a1bf..ddcdb5b8523e 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -853,7 +853,7 @@ void uart_console_write(struct uart_port *port, const char *s, int uart_register_driver(struct uart_driver *uart); void uart_unregister_driver(struct uart_driver *uart); int uart_add_one_port(struct uart_driver *reg, struct uart_port *port); -int uart_remove_one_port(struct uart_driver *reg, struct uart_port *port); +void uart_remove_one_port(struct uart_driver *reg, struct uart_port *port); bool uart_match_port(const struct uart_port *port1, const struct uart_port *port2); |