diff options
37 files changed, 1484 insertions, 557 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt index 98d89e53013d..bd3539644d3f 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt @@ -21,6 +21,7 @@ Properties: - "qcom,sc7180-pdc": For SC7180 - "qcom,sc7280-pdc": For SC7280 - "qcom,sdm845-pdc": For SDM845 + - "qcom,sdm8150-pdc": For SM8150 - "qcom,sdm8250-pdc": For SM8250 - "qcom,sdm8350-pdc": For SM8350 diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 57b68d6c7c70..3666ac5b6518 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -33,7 +33,7 @@ patternProperties: $ref: "/schemas/types.yaml#/definitions/string" enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, - FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, + FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, @@ -58,7 +58,7 @@ patternProperties: $ref: "/schemas/types.yaml#/definitions/string" enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, - EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP, + EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt deleted file mode 100644 index bfab5ca49fd1..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt +++ /dev/null @@ -1,87 +0,0 @@ -* Freescale i.MX7 Dual IOMUX Controller - -iMX7D supports two iomuxc controllers, fsl,imx7d-iomuxc controller is similar -as previous iMX SoC generation and fsl,imx7d-iomuxc-lpsr which provides low -power state retention capabilities on gpios that are part of iomuxc-lpsr -(GPIO1_IO7..GPIO1_IO0). While iomuxc-lpsr provides its own set of registers for -mux and pad control settings, it shares the input select register from main -iomuxc controller for daisy chain settings, the fsl,input-sel property extends -fsl,imx-pinctrl driver to support iomuxc-lpsr controller. - -iomuxc_lpsr: iomuxc-lpsr@302c0000 { - compatible = "fsl,imx7d-iomuxc-lpsr"; - reg = <0x302c0000 0x10000>; - fsl,input-sel = <&iomuxc>; -}; - -iomuxc: iomuxc@30330000 { - compatible = "fsl,imx7d-iomuxc"; - reg = <0x30330000 0x10000>; -}; - -Peripherals using pads from iomuxc-lpsr support low state retention power -state, under LPSR mode GPIO's state of pads are retain. - -Please refer to fsl,imx-pinctrl.txt in this directory for common binding part -and usage. - -Required properties: -- compatible: "fsl,imx7d-iomuxc" for main IOMUXC controller, or - "fsl,imx7d-iomuxc-lpsr" for Low Power State Retention IOMUXC controller. -- fsl,pins: each entry consists of 6 integers and represents the mux and config - setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val - input_val> are specified using a PIN_FUNC_ID macro, which can be found in - imx7d-pinfunc.h under device tree source folder. The last integer CONFIG is - the pad setting value like pull-up on this pin. Please refer to i.MX7 Dual - Reference Manual for detailed CONFIG settings. -- fsl,input-sel: required property for iomuxc-lpsr controller, this property is - a phandle for main iomuxc controller which shares the input select register for - daisy chain settings. - -CONFIG bits definition: -PAD_CTL_PUS_100K_DOWN (0 << 5) -PAD_CTL_PUS_5K_UP (1 << 5) -PAD_CTL_PUS_47K_UP (2 << 5) -PAD_CTL_PUS_100K_UP (3 << 5) -PAD_CTL_PUE (1 << 4) -PAD_CTL_HYS (1 << 3) -PAD_CTL_SRE_SLOW (1 << 2) -PAD_CTL_SRE_FAST (0 << 2) -PAD_CTL_DSE_X1 (0 << 0) -PAD_CTL_DSE_X4 (1 << 0) -PAD_CTL_DSE_X2 (2 << 0) -PAD_CTL_DSE_X6 (3 << 0) - -Examples: -While iomuxc-lpsr is intended to be used by dedicated peripherals to take -advantages of LPSR power mode, is also possible that an IP to use pads from -any of the iomux controllers. For example the I2C1 IP can use SCL pad from -iomuxc-lpsr controller and SDA pad from iomuxc controller as: - -i2c1: i2c@30a20000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>, <&pinctrl_i2c1_2>; -}; - -iomuxc-lpsr@302c0000 { - compatible = "fsl,imx7d-iomuxc-lpsr"; - reg = <0x302c0000 0x10000>; - fsl,input-sel = <&iomuxc>; - - pinctrl_i2c1_1: i2c1grp-1 { - fsl,pins = < - MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x4000007f - >; - }; -}; - -iomuxc@30330000 { - compatible = "fsl,imx7d-iomuxc"; - reg = <0x30330000 0x10000>; - - pinctrl_i2c1_2: i2c1grp-2 { - fsl,pins = < - MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f - >; - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml new file mode 100644 index 000000000000..621038662188 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,imx7d-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale IMX7D IOMUX Controller + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: + Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory + for common binding part and usage. + +properties: + compatible: + oneOf: + - enum: + - fsl,imx7d-iomuxc + - fsl,imx7d-iomuxc-lpsr + + reg: + maxItems: 1 + + fsl,input-sel: + description: + phandle for main iomuxc controller which shares the input select + register for daisy chain settings. + $ref: /schemas/types.yaml#/definitions/phandle + +# Client device subnode's properties +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg + mux_val input_val> are specified using a PIN_FUNC_ID macro, which can + be found in <arch/arm/boot/dts/imx7d-pinfunc.h>. The last integer + CONFIG is the pad setting value like pull-up on this pin. Please + refer to i.MX7D Reference Manual for detailed CONFIG settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + + required: + - fsl,pins + + additionalProperties: false + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + - reg + +if: + properties: + compatible: + contains: + enum: + - fsl,imx7d-iomuxc-lpsr + +then: + required: + - fsl,input-sel + +additionalProperties: false + +examples: + - | + iomuxc: pinctrl@30330000 { + compatible = "fsl,imx7d-iomuxc"; + reg = <0x30330000 0x10000>; + + pinctrl_uart5: uart5grp { + fsl,pins = + <0x0160 0x03D0 0x0714 0x1 0x0 0x7e>, + <0x0164 0x03D4 0x0000 0x1 0x0 0x76>; + }; + }; + - | + iomuxc_lpsr: pinctrl@302c0000 { + compatible = "fsl,imx7d-iomuxc-lpsr"; + reg = <0x302c0000 0x10000>; + fsl,input-sel = <&iomuxc>; + + pinctrl_gpio_lpsr: gpio1-grp { + fsl,pins = + <0x0008 0x0038 0x0000 0x0 0x0 0x59>, + <0x000C 0x003C 0x0000 0x0 0x0 0x59>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml new file mode 100644 index 000000000000..a651b2744caf --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/marvell,ac5-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell AC5 pin controller + +maintainers: + - Chris Packham <chris.packham@alliedtelesis.co.nz> + +description: + Bindings for Marvell's AC5 memory-mapped pin controller. + +properties: + compatible: + items: + - const: marvell,ac5-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + $ref: pinmux-node.yaml# + + properties: + marvell,function: + $ref: "/schemas/types.yaml#/definitions/string" + description: + Indicates the function to select. + enum: [ dev_init_done, ge, gpio, i2c0, i2c1, int_out, led, nand, pcie, ptp, sdio, + spi0, spi1, synce, tsen_int, uart0, uart1, uart2, uart3, uartsd, wd_int, xg ] + + marvell,pins: + $ref: /schemas/types.yaml#/definitions/string-array + description: + Array of MPP pins to be used for the given function. + minItems: 1 + items: + enum: [ mpp0, mpp1, mpp2, mpp3, mpp4, mpp5, mpp6, mpp7, mpp8, mpp9, + mpp10, mpp11, mpp12, mpp13, mpp14, mpp15, mpp16, mpp17, mpp18, mpp19, + mpp20, mpp21, mpp22, mpp23, mpp24, mpp25, mpp26, mpp27, mpp28, mpp29, + mpp30, mpp31, mpp32, mpp33, mpp34, mpp35, mpp36, mpp37, mpp38, mpp39, + mpp40, mpp41, mpp42, mpp43, mpp44, mpp45 ] + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@80020100 { + compatible = "marvell,ac5-pinctrl"; + reg = <0x80020100 0x20>; + + i2c0_pins: i2c0-pins { + marvell,pins = "mpp26", "mpp27"; + marvell,function = "i2c0"; + }; + + i2c0_gpio: i2c0-gpio-pins { + marvell,pins = "mpp26", "mpp27"; + marvell,function = "gpio"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt deleted file mode 100644 index 5d84fd299ccf..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt +++ /dev/null @@ -1,42 +0,0 @@ -Microsemi Ocelot pin controller Device Tree Bindings ----------------------------------------------------- - -Required properties: - - compatible : Should be "mscc,ocelot-pinctrl", - "mscc,jaguar2-pinctrl", "microchip,sparx5-pinctrl", - "mscc,luton-pinctrl", "mscc,serval-pinctrl", - "microchip,lan966x-pinctrl" or "mscc,servalt-pinctrl" - - reg : Address and length of the register set for the device - - gpio-controller : Indicates this device is a GPIO controller - - #gpio-cells : Must be 2. - The first cell is the pin number and the - second cell specifies GPIO flags, as defined in - <dt-bindings/gpio/gpio.h>. - - gpio-ranges : Range of pins managed by the GPIO controller. - - -The ocelot-pinctrl driver uses the generic pin multiplexing and generic pin -configuration documented in pinctrl-bindings.txt. - -The following generic properties are supported: - - function - - pins - -Example: - gpio: pinctrl@71070034 { - compatible = "mscc,ocelot-pinctrl"; - reg = <0x71070034 0x28>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&gpio 0 0 22>; - - uart_pins: uart-pins { - pins = "GPIO_6", "GPIO_7"; - function = "uart"; - }; - - uart2_pins: uart2-pins { - pins = "GPIO_12", "GPIO_13"; - function = "uart2"; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml new file mode 100644 index 000000000000..7149a6655623 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mscc,ocelot-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microsemi Ocelot pin controller + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Lars Povlsen <lars.povlsen@microchip.com> + +properties: + compatible: + enum: + - microchip,lan966x-pinctrl + - microchip,sparx5-pinctrl + - mscc,jaguar2-pinctrl + - mscc,luton-pinctrl + - mscc,ocelot-pinctrl + - mscc,serval-pinctrl + - mscc,servalt-pinctrl + + reg: + items: + - description: Base address + - description: Extended pin configuration registers + minItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio-ranges: true + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + +patternProperties: + '-pins$': + type: object + allOf: + - $ref: "pinmux-node.yaml" + - $ref: "pincfg-node.yaml" + + properties: + function: true + pins: true + output-high: true + output-low: true + drive-strength: true + + required: + - function + - pins + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +allOf: + - $ref: "pinctrl.yaml#" + - if: + properties: + compatible: + contains: + enum: + - microchip,lan966x-pinctrl + - microchip,sparx5-pinctrl + then: + properties: + reg: + minItems: 2 + +additionalProperties: false + +examples: + - | + gpio: pinctrl@71070034 { + compatible = "mscc,ocelot-pinctrl"; + reg = <0x71070034 0x28>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 22>; + + uart_pins: uart-pins { + pins = "GPIO_6", "GPIO_7"; + function = "uart"; + }; + + uart2_pins: uart2-pins { + pins = "GPIO_12", "GPIO_13"; + function = "uart2"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml index 3c84676a167d..c90a132fbc79 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml @@ -29,6 +29,8 @@ properties: description: gpio valid number range. maxItems: 1 + gpio-line-names: true + reg: description: | Physical address base for gpio base registers. There are 11 GPIO @@ -51,62 +53,92 @@ properties: #PIN CONFIGURATION NODES patternProperties: - '^pins': + '-pins$': type: object - description: | - A pinctrl node should contain at least one subnodes representing the - pinctrl groups available on the machine. Each subnode will list the - pins it needs, and how they should be configured, with regard to muxer - configuration, pullups, drive strength, input enable/disable and - input schmitt. - An example of using macro: - pincontroller { - /* GPIO0 set as multifunction GPIO0 */ - state_0_node_a { - pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; - }; - /* GPIO1 set as multifunction PWM */ - state_0_node_b { - pinmux = <PINMUX_GPIO1__FUNC_PWM_1>; - }; - }; - $ref: "pinmux-node.yaml" - - properties: - pinmux: - description: | - Integer array, represents gpio pin number and mux setting. - Supported pin number and mux varies for different SoCs, and are defined - as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly. - - drive-strength: - description: | - It can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See - dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192. - enum: [2, 4, 6, 8, 10, 12, 14, 16] - - bias-pull-down: true - - bias-pull-up: true - - bias-disable: true - - output-high: true - - output-low: true - - input-enable: true - - input-disable: true - - input-schmitt-enable: true - - input-schmitt-disable: true - - required: - - pinmux - additionalProperties: false + patternProperties: + '^pins': + type: object + description: | + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and + input schmitt. + $ref: "pinmux-node.yaml" + + properties: + pinmux: + description: | + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are defined + as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly. + + drive-strength: + description: | + It can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See + dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192. + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + mediatek,drive-strength-adv: + description: | + Describe the specific driving setup property. + For I2C pins, the existing generic driving setup can only support + 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they + can support 0.125/0.25/0.5/1mA adjustment. If we enable specific + driving setup, the existing generic setup will be disabled. + The specific driving setup is controlled by E1E0EN. + When E1=0/E0=0, the strength is 0.125mA. + When E1=0/E0=1, the strength is 0.25mA. + When E1=1/E0=0, the strength is 0.5mA. + When E1=1/E0=1, the strength is 1mA. + EN is used to enable or disable the specific driving setup. + Valid arguments are described as below: + 0: (E1, E0, EN) = (0, 0, 0) + 1: (E1, E0, EN) = (0, 0, 1) + 2: (E1, E0, EN) = (0, 1, 0) + 3: (E1, E0, EN) = (0, 1, 1) + 4: (E1, E0, EN) = (1, 0, 0) + 5: (E1, E0, EN) = (1, 0, 1) + 6: (E1, E0, EN) = (1, 1, 0) + 7: (E1, E0, EN) = (1, 1, 1) + So the valid arguments are from 0 to 7. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + + mediatek,pull-up-adv: + description: | + Pull up settings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + required: + - pinmux + + additionalProperties: false allOf: - $ref: "pinctrl.yaml#" @@ -151,8 +183,17 @@ examples: interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>; #interrupt-cells = <2>; - pins { - pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; - output-low; + spi1-default-pins { + pins-cs-mosi-clk { + pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>, + <PINMUX_GPIO159__FUNC_SPI1_A_MO>, + <PINMUX_GPIO156__FUNC_SPI1_A_CLK>; + bias-disable; + }; + + pins-miso { + pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>; + bias-pull-down; + }; }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml index fe2bcf0694d9..22dbcba752d0 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -53,6 +53,7 @@ properties: - qcom,pmr735b-gpio - qcom,pms405-gpio - qcom,pmx55-gpio + - qcom,pmx65-gpio - enum: - qcom,spmi-gpio @@ -140,6 +141,7 @@ $defs: and gpio10) - gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10 and gpio11) + - gpio1-gpio16 for pmx65 items: pattern: "^gpio([0-9]+)$" diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml new file mode 100644 index 000000000000..d32ee32776e8 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) + Low Power Island (LPI) TLMM block + +maintainers: + - Srinivasa Rao Mandadapu <srivasam@codeaurora.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + LPASS LPI IP on most Qualcomm SoCs + +properties: + compatible: + const: qcom,sc7280-lpass-lpi-pinctrl + + reg: + minItems: 2 + maxItems: 2 + + gpio-controller: true + + '#gpio-cells': + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9])$" + minItems: 1 + maxItems: 15 + + function: + enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws, + qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk, + dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data, + i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk, + dmic3_data, i2s2_data ] + description: + Specify the alternative function to be configured for the specified + pins. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + required: + - pins + - function + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + lpass_tlmm: pinctrl@33c0000 { + compatible = "qcom,sc7280-lpass-lpi-pinctrl"; + reg = <0x33c0000 0x20000>, + <0x3550000 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 15>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml index 5c5542f1627c..06efb1382876 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml index b0eae3a67ab1..5b742513aecb 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml @@ -33,6 +33,7 @@ properties: enum: - rockchip,px30-pinctrl - rockchip,rk2928-pinctrl + - rockchip,rk3036-pinctrl - rockchip,rk3066a-pinctrl - rockchip,rk3066b-pinctrl - rockchip,rk3128-pinctrl @@ -44,6 +45,7 @@ properties: - rockchip,rk3368-pinctrl - rockchip,rk3399-pinctrl - rockchip,rk3568-pinctrl + - rockchip,rk3588-pinctrl - rockchip,rv1108-pinctrl rockchip,grf: diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c index 099e358d2491..e342a6dc4c6c 100644 --- a/drivers/gpio/gpio-rockchip.c +++ b/drivers/gpio/gpio-rockchip.c @@ -19,6 +19,7 @@ #include <linux/of_address.h> #include <linux/of_device.h> #include <linux/of_irq.h> +#include <linux/pinctrl/pinconf-generic.h> #include <linux/regmap.h> #include "../pinctrl/core.h" @@ -706,7 +707,7 @@ static int rockchip_gpio_probe(struct platform_device *pdev) struct device_node *pctlnp = of_get_parent(np); struct pinctrl_dev *pctldev = NULL; struct rockchip_pin_bank *bank = NULL; - struct rockchip_pin_output_deferred *cfg; + struct rockchip_pin_deferred *cfg; static int gpio; int id, ret; @@ -747,15 +748,27 @@ static int rockchip_gpio_probe(struct platform_device *pdev) return ret; } - while (!list_empty(&bank->deferred_output)) { - cfg = list_first_entry(&bank->deferred_output, - struct rockchip_pin_output_deferred, head); + while (!list_empty(&bank->deferred_pins)) { + cfg = list_first_entry(&bank->deferred_pins, + struct rockchip_pin_deferred, head); list_del(&cfg->head); - ret = rockchip_gpio_direction_output(&bank->gpio_chip, cfg->pin, cfg->arg); - if (ret) - dev_warn(dev, "setting output pin %u to %u failed\n", cfg->pin, cfg->arg); - + switch (cfg->param) { + case PIN_CONFIG_OUTPUT: + ret = rockchip_gpio_direction_output(&bank->gpio_chip, cfg->pin, cfg->arg); + if (ret) + dev_warn(dev, "setting output pin %u to %u failed\n", cfg->pin, + cfg->arg); + break; + case PIN_CONFIG_INPUT_ENABLE: + ret = rockchip_gpio_direction_input(&bank->gpio_chip, cfg->pin); + if (ret) + dev_warn(dev, "setting input pin %u failed\n", cfg->pin); + break; + default: + dev_warn(dev, "unknown deferred config param %d\n", cfg->param); + break; + } kfree(cfg); } diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index ae1ce319cd78..d9b235c88b54 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -931,6 +931,11 @@ static int of_gpiochip_add_pin_range(struct gpio_chip *chip) if (!np) return 0; + if (!of_property_read_bool(np, "gpio-ranges") && + chip->of_gpio_ranges_fallback) { + return chip->of_gpio_ranges_fallback(chip, np); + } + group_names = of_find_property(np, group_names_propname, NULL); for (;; index++) { diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c index a3fa03bcd9a3..80838dc54b3a 100644 --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c @@ -1236,18 +1236,17 @@ FUNC_GROUP_DECL(SALT8, AA12); FUNC_GROUP_DECL(WDTRST4, AA12); #define AE12 196 -SIG_EXPR_LIST_DECL_SEMG(AE12, FWSPIDQ2, FWQSPID, FWSPID, - SIG_DESC_SET(SCU438, 4)); +SIG_EXPR_LIST_DECL_SESG(AE12, FWSPIQ2, FWQSPI, SIG_DESC_SET(SCU438, 4)); SIG_EXPR_LIST_DECL_SESG(AE12, GPIOY4, GPIOY4); -PIN_DECL_(AE12, SIG_EXPR_LIST_PTR(AE12, FWSPIDQ2), +PIN_DECL_(AE12, SIG_EXPR_LIST_PTR(AE12, FWSPIQ2), SIG_EXPR_LIST_PTR(AE12, GPIOY4)); #define AF12 197 -SIG_EXPR_LIST_DECL_SEMG(AF12, FWSPIDQ3, FWQSPID, FWSPID, - SIG_DESC_SET(SCU438, 5)); +SIG_EXPR_LIST_DECL_SESG(AF12, FWSPIQ3, FWQSPI, SIG_DESC_SET(SCU438, 5)); SIG_EXPR_LIST_DECL_SESG(AF12, GPIOY5, GPIOY5); -PIN_DECL_(AF12, SIG_EXPR_LIST_PTR(AF12, FWSPIDQ3), +PIN_DECL_(AF12, SIG_EXPR_LIST_PTR(AF12, FWSPIQ3), SIG_EXPR_LIST_PTR(AF12, GPIOY5)); +FUNC_GROUP_DECL(FWQSPI, AE12, AF12); #define AC12 198 SSSF_PIN_DECL(AC12, GPIOY6, FWSPIABR, SIG_DESC_SET(SCU438, 6)); @@ -1520,9 +1519,8 @@ SIG_EXPR_LIST_DECL_SEMG(Y4, EMMCDAT7, EMMCG8, EMMC, SIG_DESC_SET(SCU404, 3)); PIN_DECL_3(Y4, GPIO18E3, FWSPIDMISO, VBMISO, EMMCDAT7); GROUP_DECL(FWSPID, Y1, Y2, Y3, Y4); -GROUP_DECL(FWQSPID, Y1, Y2, Y3, Y4, AE12, AF12); GROUP_DECL(EMMCG8, AB4, AA4, AC4, AA5, Y5, AB5, AB6, AC5, Y1, Y2, Y3, Y4); -FUNC_DECL_2(FWSPID, FWSPID, FWQSPID); +FUNC_DECL_1(FWSPID, FWSPID); FUNC_GROUP_DECL(VB, Y1, Y2, Y3, Y4); FUNC_DECL_3(EMMC, EMMCG1, EMMCG4, EMMCG8); /* @@ -1918,7 +1916,7 @@ static const struct aspeed_pin_group aspeed_g6_groups[] = { ASPEED_PINCTRL_GROUP(FSI2), ASPEED_PINCTRL_GROUP(FWSPIABR), ASPEED_PINCTRL_GROUP(FWSPID), - ASPEED_PINCTRL_GROUP(FWQSPID), + ASPEED_PINCTRL_GROUP(FWQSPI), ASPEED_PINCTRL_GROUP(FWSPIWP), ASPEED_PINCTRL_GROUP(GPIT0), ASPEED_PINCTRL_GROUP(GPIT1), @@ -2160,6 +2158,7 @@ static const struct aspeed_pin_function aspeed_g6_functions[] = { ASPEED_PINCTRL_FUNC(FSI2), ASPEED_PINCTRL_FUNC(FWSPIABR), ASPEED_PINCTRL_FUNC(FWSPID), + ASPEED_PINCTRL_FUNC(FWQSPI), ASPEED_PINCTRL_FUNC(FWSPIWP), ASPEED_PINCTRL_FUNC(GPIT0), ASPEED_PINCTRL_FUNC(GPIT1), diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c index 47e433e09c5c..dad453054776 100644 --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c @@ -358,6 +358,22 @@ static int bcm2835_gpio_direction_output(struct gpio_chip *chip, return 0; } +static int bcm2835_of_gpio_ranges_fallback(struct gpio_chip *gc, + struct device_node *np) +{ + struct pinctrl_dev *pctldev = of_pinctrl_get(np); + + of_node_put(np); + + if (!pctldev) + return 0; + + gpiochip_add_pin_range(gc, pinctrl_dev_get_devname(pctldev), 0, 0, + gc->ngpio); + + return 0; +} + static const struct gpio_chip bcm2835_gpio_chip = { .label = MODULE_NAME, .owner = THIS_MODULE, @@ -372,6 +388,7 @@ static const struct gpio_chip bcm2835_gpio_chip = { .base = -1, .ngpio = BCM2835_NUM_GPIOS, .can_sleep = false, + .of_gpio_ranges_fallback = bcm2835_of_gpio_ranges_fallback, }; static const struct gpio_chip bcm2711_gpio_chip = { @@ -388,6 +405,7 @@ static const struct gpio_chip bcm2711_gpio_chip = { .base = -1, .ngpio = BCM2711_NUM_GPIOS, .can_sleep = false, + .of_gpio_ranges_fallback = bcm2835_of_gpio_ranges_fallback, }; static void bcm2835_gpio_irq_handle_bank(struct bcm2835_pinctrl *pc, diff --git a/drivers/pinctrl/mediatek/Kconfig b/drivers/pinctrl/mediatek/Kconfig index 8dca1ef04965..817a7fbc911f 100644 --- a/drivers/pinctrl/mediatek/Kconfig +++ b/drivers/pinctrl/mediatek/Kconfig @@ -165,6 +165,7 @@ config PINCTRL_MT8195 bool "Mediatek MT8195 pin control" depends on OF depends on ARM64 || COMPILE_TEST + default ARM64 && ARCH_MEDIATEK select PINCTRL_MTK_PARIS config PINCTRL_MT8365 diff --git a/drivers/pinctrl/meson/pinctrl-meson-s4.c b/drivers/pinctrl/meson/pinctrl-meson-s4.c index 3c7358f53302..cea77864b880 100644 --- a/drivers/pinctrl/meson/pinctrl-meson-s4.c +++ b/drivers/pinctrl/meson/pinctrl-meson-s4.c @@ -575,6 +575,7 @@ static struct meson_pmx_group meson_s4_periphs_groups[] = { GROUP(tdm_d2_c, 4), GROUP(tdm_d3_c, 4), GROUP(tdm_fs1_c, 4), + GROUP(tdm_sclk1_c, 4), GROUP(mclk_1_c, 4), GROUP(tdm_d4_c, 4), GROUP(tdm_d5_c, 4), @@ -936,7 +937,7 @@ static const char * const iso7816_groups[] = { }; static const char * const tdm_groups[] = { - "tdm_d2_c", "tdm_d3_c", "tdm_fs1_c", "tdm_d4_c", "tdm_d5_c", + "tdm_d2_c", "tdm_d3_c", "tdm_fs1_c", "tdm_d4_c", "tdm_d5_c", "tdm_sclk1_c", "tdm_fs1_d", "tdm_d4_d", "tdm_d3_d", "tdm_d2_d", "tdm_sclk1_d", "tdm_sclk1_h", "tdm_fs1_h", "tdm_d2_h", "tdm_d3_h", "tdm_d4_h", "tdm_d1", "tdm_d0", "tdm_fs0", "tdm_sclk0", "tdm_fs2", "tdm_sclk2", diff --git a/drivers/pinctrl/mvebu/Kconfig b/drivers/pinctrl/mvebu/Kconfig index 0d12894d3ee1..aa5883f09d7b 100644 --- a/drivers/pinctrl/mvebu/Kconfig +++ b/drivers/pinctrl/mvebu/Kconfig @@ -45,6 +45,10 @@ config PINCTRL_ORION bool select PINCTRL_MVEBU +config PINCTRL_AC5 + bool + select PINCTRL_MVEBU + config PINCTRL_ARMADA_37XX bool select GENERIC_PINCONF diff --git a/drivers/pinctrl/mvebu/Makefile b/drivers/pinctrl/mvebu/Makefile index cd082dca4482..23458ab17c53 100644 --- a/drivers/pinctrl/mvebu/Makefile +++ b/drivers/pinctrl/mvebu/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_PINCTRL_ARMADA_CP110) += pinctrl-armada-cp110.o obj-$(CONFIG_PINCTRL_ARMADA_XP) += pinctrl-armada-xp.o obj-$(CONFIG_PINCTRL_ARMADA_37XX) += pinctrl-armada-37xx.o obj-$(CONFIG_PINCTRL_ORION) += pinctrl-orion.o +obj-$(CONFIG_PINCTRL_AC5) += pinctrl-ac5.o diff --git a/drivers/pinctrl/mvebu/pinctrl-ac5.c b/drivers/pinctrl/mvebu/pinctrl-ac5.c new file mode 100644 index 000000000000..292633e61129 --- /dev/null +++ b/drivers/pinctrl/mvebu/pinctrl-ac5.c @@ -0,0 +1,261 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Marvell ac5 pinctrl driver based on mvebu pinctrl core + * + * Copyright (C) 2021 Marvell + * + * Noam Liron <lnoam@marvell.com> + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-mvebu.h" + +static struct mvebu_mpp_mode ac5_mpp_modes[] = { + MPP_MODE(0, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "sdio", "d0"), + MPP_FUNCTION(2, "nand", "io4")), + MPP_MODE(1, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "sdio", "d1"), + MPP_FUNCTION(2, "nand", "io3")), + MPP_MODE(2, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "sdio", "d2"), + MPP_FUNCTION(2, "nand", "io2")), + MPP_MODE(3, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "sdio", "d3"), + MPP_FUNCTION(2, "nand", "io7")), + MPP_MODE(4, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "sdio", "d4"), + MPP_FUNCTION(2, "nand", "io6"), + MPP_FUNCTION(3, "uart3", "txd"), + MPP_FUNCTION(4, "uart2", "txd")), + MPP_MODE(5, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "sdio", "d5"), + MPP_FUNCTION(2, "nand", "io5"), + MPP_FUNCTION(3, "uart3", "rxd"), + MPP_FUNCTION(4, "uart2", "rxd")), + MPP_MODE(6, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "sdio", "d6"), + MPP_FUNCTION(2, "nand", "io0"), + MPP_FUNCTION(3, "i2c1", "sck")), + MPP_MODE(7, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "sdio", "d7"), + MPP_FUNCTION(2, "nand", "io1"), + MPP_FUNCTION(3, "i2c1", "sda")), + MPP_MODE(8, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "sdio", "clk"), + MPP_FUNCTION(2, "nand", "wen")), + MPP_MODE(9, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "sdio", "cmd"), + MPP_FUNCTION(2, "nand", "ale")), + MPP_MODE(10, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "sdio", "ds"), + MPP_FUNCTION(2, "nand", "cle")), + MPP_MODE(11, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "sdio", "rst"), + MPP_FUNCTION(2, "nand", "cen")), + MPP_MODE(12, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "spi0", "clk")), + MPP_MODE(13, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "spi0", "csn")), + MPP_MODE(14, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "spi0", "mosi")), + MPP_MODE(15, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "spi0", "miso")), + MPP_MODE(16, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "spi0", "wpn"), + MPP_FUNCTION(2, "nand", "ren"), + MPP_FUNCTION(3, "uart1", "txd")), + MPP_MODE(17, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "spi0", "hold"), + MPP_FUNCTION(2, "nand", "rb"), + MPP_FUNCTION(3, "uart1", "rxd")), + MPP_MODE(18, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "tsen_int", NULL), + MPP_FUNCTION(2, "uart2", "rxd"), + MPP_FUNCTION(3, "wd_int", NULL)), + MPP_MODE(19, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "dev_init_done", NULL), + MPP_FUNCTION(2, "uart2", "txd")), + MPP_MODE(20, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(2, "i2c1", "sck"), + MPP_FUNCTION(3, "spi1", "clk"), + MPP_FUNCTION(4, "uart3", "txd")), + MPP_MODE(21, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(2, "i2c1", "sda"), + MPP_FUNCTION(3, "spi1", "csn"), + MPP_FUNCTION(4, "uart3", "rxd")), + MPP_MODE(22, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(3, "spi1", "mosi")), + MPP_MODE(23, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(3, "spi1", "miso")), + MPP_MODE(24, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "wd_int", NULL), + MPP_FUNCTION(2, "uart2", "txd"), + MPP_FUNCTION(3, "uartsd", "txd")), + MPP_MODE(25, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "int_out", NULL), + MPP_FUNCTION(2, "uart2", "rxd"), + MPP_FUNCTION(3, "uartsd", "rxd")), + MPP_MODE(26, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "i2c0", "sck"), + MPP_FUNCTION(2, "ptp", "clk1"), + MPP_FUNCTION(3, "uart3", "txd")), + MPP_MODE(27, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "i2c0", "sda"), + MPP_FUNCTION(2, "ptp", "pulse"), + MPP_FUNCTION(3, "uart3", "rxd")), + MPP_MODE(28, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "xg", "mdio"), + MPP_FUNCTION(2, "ge", "mdio"), + MPP_FUNCTION(3, "uart3", "txd")), + MPP_MODE(29, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "xg", "mdio"), + MPP_FUNCTION(2, "ge", "mdio"), + MPP_FUNCTION(3, "uart3", "rxd")), + MPP_MODE(30, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "xg", "mdio"), + MPP_FUNCTION(2, "ge", "mdio"), + MPP_FUNCTION(3, "ge", "mdio")), + MPP_MODE(31, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "xg", "mdio"), + MPP_FUNCTION(2, "ge", "mdio"), + MPP_FUNCTION(3, "ge", "mdio")), + MPP_MODE(32, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "uart0", "txd")), + MPP_MODE(33, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "uart0", "rxd"), + MPP_FUNCTION(2, "ptp", "clk1"), + MPP_FUNCTION(3, "ptp", "pulse")), + MPP_MODE(34, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "ge", "mdio"), + MPP_FUNCTION(2, "uart3", "rxd")), + MPP_MODE(35, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "ge", "mdio"), + MPP_FUNCTION(2, "uart3", "txd"), + MPP_FUNCTION(3, "pcie", "rstoutn")), + MPP_MODE(36, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "ptp", "clk0_tp"), + MPP_FUNCTION(2, "ptp", "clk1_tp")), + MPP_MODE(37, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "ptp", "pulse_tp"), + MPP_FUNCTION(2, "wd_int", NULL)), + MPP_MODE(38, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "synce", "clk_out0")), + MPP_MODE(39, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "synce", "clk_out1")), + MPP_MODE(40, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "ptp", "pclk_out0"), + MPP_FUNCTION(2, "ptp", "pclk_out1")), + MPP_MODE(41, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "ptp", "ref_clk"), + MPP_FUNCTION(2, "ptp", "clk1"), + MPP_FUNCTION(3, "ptp", "pulse"), + MPP_FUNCTION(4, "uart2", "txd"), + MPP_FUNCTION(5, "i2c1", "sck")), + MPP_MODE(42, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "ptp", "clk0"), + MPP_FUNCTION(2, "ptp", "clk1"), + MPP_FUNCTION(3, "ptp", "pulse"), + MPP_FUNCTION(4, "uart2", "rxd"), + MPP_FUNCTION(5, "i2c1", "sda")), + MPP_MODE(43, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "led", "clk")), + MPP_MODE(44, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "led", "stb")), + MPP_MODE(45, + MPP_FUNCTION(0, "gpio", NULL), + MPP_FUNCTION(1, "led", "data")), +}; + +static struct mvebu_pinctrl_soc_info ac5_pinctrl_info; + +static const struct of_device_id ac5_pinctrl_of_match[] = { + { + .compatible = "marvell,ac5-pinctrl", + }, + { }, +}; + +static const struct mvebu_mpp_ctrl ac5_mpp_controls[] = { + MPP_FUNC_CTRL(0, 45, NULL, mvebu_mmio_mpp_ctrl), }; + +static struct pinctrl_gpio_range ac5_mpp_gpio_ranges[] = { + MPP_GPIO_RANGE(0, 0, 0, 46), }; + +static int ac5_pinctrl_probe(struct platform_device *pdev) +{ + struct mvebu_pinctrl_soc_info *soc = &ac5_pinctrl_info; + + soc->variant = 0; /* no variants for ac5 */ + soc->controls = ac5_mpp_controls; + soc->ncontrols = ARRAY_SIZE(ac5_mpp_controls); + soc->gpioranges = ac5_mpp_gpio_ranges; + soc->ngpioranges = ARRAY_SIZE(ac5_mpp_gpio_ranges); + soc->modes = ac5_mpp_modes; + soc->nmodes = ac5_mpp_controls[0].npins; + + pdev->dev.platform_data = soc; + + return mvebu_pinctrl_simple_mmio_probe(pdev); +} + +static struct platform_driver ac5_pinctrl_driver = { + .driver = { + .name = "ac5-pinctrl", + .of_match_table = of_match_ptr(ac5_pinctrl_of_match), + }, + .probe = ac5_pinctrl_probe, +}; +builtin_platform_driver(ac5_pinctrl_driver); diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c b/drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c index 0b9b6cbfd10c..ac3d4d91266d 100644 --- a/drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c +++ b/drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c @@ -440,6 +440,10 @@ static const unsigned mc2_a_1_pins[] = { DB8500_PIN_A5, DB8500_PIN_B4, DB8500_PIN_C8, DB8500_PIN_A12, DB8500_PIN_C10, DB8500_PIN_B10, DB8500_PIN_B9, DB8500_PIN_A9, DB8500_PIN_C7, DB8500_PIN_A7, DB8500_PIN_C5 }; +/* MC2 without the feedback clock */ +static const unsigned mc2_a_2_pins[] = { DB8500_PIN_A5, DB8500_PIN_B4, + DB8500_PIN_A12, DB8500_PIN_C10, DB8500_PIN_B10, DB8500_PIN_B9, + DB8500_PIN_A9, DB8500_PIN_C7, DB8500_PIN_A7, DB8500_PIN_C5 }; static const unsigned ssp1_a_1_pins[] = { DB8500_PIN_C9, DB8500_PIN_B11, DB8500_PIN_C12, DB8500_PIN_C11 }; static const unsigned ssp0_a_1_pins[] = { DB8500_PIN_D12, DB8500_PIN_B13, @@ -699,6 +703,7 @@ static const struct nmk_pingroup nmk_db8500_groups[] = { DB8500_PIN_GROUP(kp_a_1, NMK_GPIO_ALT_A), DB8500_PIN_GROUP(kpskaskb_a_1, NMK_GPIO_ALT_A), DB8500_PIN_GROUP(mc2_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(mc2_a_2, NMK_GPIO_ALT_A), DB8500_PIN_GROUP(ssp1_a_1, NMK_GPIO_ALT_A), DB8500_PIN_GROUP(ssp0_a_1, NMK_GPIO_ALT_A), DB8500_PIN_GROUP(i2c0_a_1, NMK_GPIO_ALT_A), @@ -856,7 +861,7 @@ DB8500_FUNC_GROUPS(lcd, "lcdvsi0_a_1", "lcdvsi1_a_1", "lcd_d0_d7_a_1", "lcd_d8_d11_a_1", "lcd_d12_d15_a_1", "lcd_d12_d23_a_1", "lcd_b_1", "lcd_d16_d23_b_1"); DB8500_FUNC_GROUPS(kp, "kp_a_1", "kp_a_2", "kp_b_1", "kp_b_2", "kp_c_1", "kp_oc1_1"); -DB8500_FUNC_GROUPS(mc2, "mc2_a_1", "mc2rstn_c_1"); +DB8500_FUNC_GROUPS(mc2, "mc2_a_1", "mc2_a_2", "mc2rstn_c_1"); DB8500_FUNC_GROUPS(ssp1, "ssp1_a_1"); DB8500_FUNC_GROUPS(ssp0, "ssp0_a_1"); DB8500_FUNC_GROUPS(i2c0, "i2c0_a_1"); diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c index fa6becca1788..1ca11616db74 100644 --- a/drivers/pinctrl/pinctrl-ingenic.c +++ b/drivers/pinctrl/pinctrl-ingenic.c @@ -139,6 +139,30 @@ struct ingenic_gpio_chip { unsigned int irq, reg_base; }; +static const unsigned long enabled_socs = + IS_ENABLED(CONFIG_MACH_JZ4730) << ID_JZ4730 | + IS_ENABLED(CONFIG_MACH_JZ4740) << ID_JZ4740 | + IS_ENABLED(CONFIG_MACH_JZ4725B) << ID_JZ4725B | + IS_ENABLED(CONFIG_MACH_JZ4750) << ID_JZ4750 | + IS_ENABLED(CONFIG_MACH_JZ4755) << ID_JZ4755 | + IS_ENABLED(CONFIG_MACH_JZ4760) << ID_JZ4760 | + IS_ENABLED(CONFIG_MACH_JZ4770) << ID_JZ4770 | + IS_ENABLED(CONFIG_MACH_JZ4775) << ID_JZ4775 | + IS_ENABLED(CONFIG_MACH_JZ4780) << ID_JZ4780 | + IS_ENABLED(CONFIG_MACH_X1000) << ID_X1000 | + IS_ENABLED(CONFIG_MACH_X1500) << ID_X1500 | + IS_ENABLED(CONFIG_MACH_X1830) << ID_X1830 | + IS_ENABLED(CONFIG_MACH_X2000) << ID_X2000 | + IS_ENABLED(CONFIG_MACH_X2100) << ID_X2100; + +static bool +is_soc_or_above(const struct ingenic_pinctrl *jzpc, enum jz_version version) +{ + return (enabled_socs >> version) && + (!(enabled_socs & GENMASK(version - 1, 0)) + || jzpc->info->version >= version); +} + static const u32 jz4730_pull_ups[4] = { 0x3fa3320f, 0xf200ffff, 0xffffffff, 0xffffffff, }; @@ -3242,7 +3266,7 @@ static u32 ingenic_gpio_read_reg(struct ingenic_gpio_chip *jzgc, u8 reg) static void ingenic_gpio_set_bit(struct ingenic_gpio_chip *jzgc, u8 reg, u8 offset, bool set) { - if (jzgc->jzpc->info->version == ID_JZ4730) { + if (!is_soc_or_above(jzgc->jzpc, ID_JZ4740)) { regmap_update_bits(jzgc->jzpc->map, jzgc->reg_base + reg, BIT(offset), set ? BIT(offset) : 0); return; @@ -3300,9 +3324,9 @@ static inline bool ingenic_gpio_get_value(struct ingenic_gpio_chip *jzgc, static void ingenic_gpio_set_value(struct ingenic_gpio_chip *jzgc, u8 offset, int value) { - if (jzgc->jzpc->info->version >= ID_JZ4770) + if (is_soc_or_above(jzgc->jzpc, ID_JZ4770)) ingenic_gpio_set_bit(jzgc, JZ4770_GPIO_PAT0, offset, !!value); - else if (jzgc->jzpc->info->version >= ID_JZ4740) + else if (is_soc_or_above(jzgc->jzpc, ID_JZ4740)) ingenic_gpio_set_bit(jzgc, JZ4740_GPIO_DATA, offset, !!value); else ingenic_gpio_set_bit(jzgc, JZ4730_GPIO_DATA, offset, !!value); @@ -3337,10 +3361,10 @@ static void irq_set_type(struct ingenic_gpio_chip *jzgc, break; } - if (jzgc->jzpc->info->version >= ID_JZ4770) { + if (is_soc_or_above(jzgc->jzpc, ID_JZ4770)) { reg1 = JZ4770_GPIO_PAT1; reg2 = JZ4770_GPIO_PAT0; - } else if (jzgc->jzpc->info->version >= ID_JZ4740) { + } else if (is_soc_or_above(jzgc->jzpc, ID_JZ4740)) { reg1 = JZ4740_GPIO_TRIG; reg2 = JZ4740_GPIO_DIR; } else { @@ -3350,12 +3374,12 @@ static void irq_set_type(struct ingenic_gpio_chip *jzgc, return; } - if (jzgc->jzpc->info->version >= ID_X2000) { + if (is_soc_or_above(jzgc->jzpc, ID_X2000)) { ingenic_gpio_shadow_set_bit(jzgc, reg2, offset, val1); ingenic_gpio_shadow_set_bit(jzgc, reg1, offset, val2); ingenic_gpio_shadow_set_bit_load(jzgc); ingenic_gpio_set_bit(jzgc, X2000_GPIO_EDG, offset, val3); - } else if (jzgc->jzpc->info->version >= ID_X1000) { + } else if (is_soc_or_above(jzgc->jzpc, ID_X1000)) { ingenic_gpio_shadow_set_bit(jzgc, reg2, offset, val1); ingenic_gpio_shadow_set_bit(jzgc, reg1, offset, val2); ingenic_gpio_shadow_set_bit_load(jzgc); @@ -3371,7 +3395,7 @@ static void ingenic_gpio_irq_mask(struct irq_data *irqd) struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); int irq = irqd->hwirq; - if (jzgc->jzpc->info->version >= ID_JZ4740) + if (is_soc_or_above(jzgc->jzpc, ID_JZ4740)) ingenic_gpio_set_bit(jzgc, GPIO_MSK, irq, true); else ingenic_gpio_set_bit(jzgc, JZ4730_GPIO_GPIMR, irq, true); @@ -3383,7 +3407,7 @@ static void ingenic_gpio_irq_unmask(struct irq_data *irqd) struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); int irq = irqd->hwirq; - if (jzgc->jzpc->info->version >= ID_JZ4740) + if (is_soc_or_above(jzgc->jzpc, ID_JZ4740)) ingenic_gpio_set_bit(jzgc, GPIO_MSK, irq, false); else ingenic_gpio_set_bit(jzgc, JZ4730_GPIO_GPIMR, irq, false); @@ -3395,9 +3419,9 @@ static void ingenic_gpio_irq_enable(struct irq_data *irqd) struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc); int irq = irqd->hwirq; - if (jzgc->jzpc->info->version >= ID_JZ4770) + if (is_soc_or_above(jzgc->jzpc, ID_JZ4770)) ingenic_gpio_set_bit(jzgc, JZ4770_GPIO_INT, irq, true); - else if (jzgc->jzpc->info->version >= ID_JZ4740) + else if (is_soc_or_above(jzgc->jzpc, ID_JZ4740)) ingenic_gpio_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, true); else ingenic_gpio_set_bit(jzgc, JZ4730_GPIO_GPIER, irq, true); @@ -3413,9 +3437,9 @@ static void ingenic_gpio_irq_disable(struct irq_data *irqd) ingenic_gpio_irq_mask(irqd); - if (jzgc->jzpc->info->version >= ID_JZ4770) + if (is_soc_or_above(jzgc->jzpc, ID_JZ4770)) ingenic_gpio_set_bit(jzgc, JZ4770_GPIO_INT, irq, false); - else if (jzgc->jzpc->info->version >= ID_JZ4740) + else if (is_soc_or_above(jzgc->jzpc, ID_JZ4740)) ingenic_gpio_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, false); else ingenic_gpio_set_bit(jzgc, JZ4730_GPIO_GPIER, irq, false); @@ -3429,7 +3453,7 @@ static void ingenic_gpio_irq_ack(struct irq_data *irqd) bool high; if ((irqd_get_trigger_type(irqd) == IRQ_TYPE_EDGE_BOTH) && - (jzgc->jzpc->info->version < ID_X2000)) { + !is_soc_or_above(jzgc->jzpc, ID_X2000)) { /* * Switch to an interrupt for the opposite edge to the one that * triggered the interrupt being ACKed. @@ -3441,9 +3465,9 @@ static void ingenic_gpio_irq_ack(struct irq_data *irqd) irq_set_type(jzgc, irq, IRQ_TYPE_LEVEL_HIGH); } - if (jzgc->jzpc->info->version >= ID_JZ4770) + if (is_soc_or_above(jzgc->jzpc, ID_JZ4770)) ingenic_gpio_set_bit(jzgc, JZ4770_GPIO_FLAG, irq, false); - else if (jzgc->jzpc->info->version >= ID_JZ4740) + else if (is_soc_or_above(jzgc->jzpc, ID_JZ4740)) ingenic_gpio_set_bit(jzgc, JZ4740_GPIO_DATA, irq, true); else ingenic_gpio_set_bit(jzgc, JZ4730_GPIO_GPFR, irq, false); @@ -3468,7 +3492,7 @@ static int ingenic_gpio_irq_set_type(struct irq_data *irqd, unsigned int type) irq_set_handler_locked(irqd, handle_bad_irq); } - if ((type == IRQ_TYPE_EDGE_BOTH) && (jzgc->jzpc->info->version < ID_X2000)) { + if ((type == IRQ_TYPE_EDGE_BOTH) && !is_soc_or_above(jzgc->jzpc, ID_X2000)) { /* * The hardware does not support interrupts on both edges. The * best we can do is to set up a single-edge interrupt and then @@ -3500,9 +3524,9 @@ static void ingenic_gpio_irq_handler(struct irq_desc *desc) chained_irq_enter(irq_chip, desc); - if (jzgc->jzpc->info->version >= ID_JZ4770) + if (is_soc_or_above(jzgc->jzpc, ID_JZ4770)) flag = ingenic_gpio_read_reg(jzgc, JZ4770_GPIO_FLAG); - else if (jzgc->jzpc->info->version >= ID_JZ4740) + else if (is_soc_or_above(jzgc->jzpc, ID_JZ4740)) flag = ingenic_gpio_read_reg(jzgc, JZ4740_GPIO_FLAG); else flag = ingenic_gpio_read_reg(jzgc, JZ4730_GPIO_GPFR); @@ -3547,14 +3571,14 @@ static inline void ingenic_config_pin(struct ingenic_pinctrl *jzpc, unsigned int offt = pin / PINS_PER_GPIO_CHIP; if (set) { - if (jzpc->info->version >= ID_JZ4740) + if (is_soc_or_above(jzpc, ID_JZ4740)) regmap_write(jzpc->map, offt * jzpc->info->reg_offset + REG_SET(reg), BIT(idx)); else regmap_set_bits(jzpc->map, offt * jzpc->info->reg_offset + reg, BIT(idx)); } else { - if (jzpc->info->version >= ID_JZ4740) + if (is_soc_or_above(jzpc, ID_JZ4740)) regmap_write(jzpc->map, offt * jzpc->info->reg_offset + REG_CLEAR(reg), BIT(idx)); else @@ -3613,12 +3637,12 @@ static int ingenic_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) struct ingenic_pinctrl *jzpc = jzgc->jzpc; unsigned int pin = gc->base + offset; - if (jzpc->info->version >= ID_JZ4770) { + if (is_soc_or_above(jzpc, ID_JZ4770)) { if (ingenic_get_pin_config(jzpc, pin, JZ4770_GPIO_INT) || ingenic_get_pin_config(jzpc, pin, JZ4770_GPIO_PAT1)) return GPIO_LINE_DIRECTION_IN; return GPIO_LINE_DIRECTION_OUT; - } else if (jzpc->info->version == ID_JZ4730) { + } else if (!is_soc_or_above(jzpc, ID_JZ4740)) { if (!ingenic_get_pin_config(jzpc, pin, JZ4730_GPIO_GPDIR)) return GPIO_LINE_DIRECTION_IN; return GPIO_LINE_DIRECTION_OUT; @@ -3669,18 +3693,18 @@ static int ingenic_pinmux_set_pin_fn(struct ingenic_pinctrl *jzpc, dev_dbg(jzpc->dev, "set pin P%c%u to function %u\n", 'A' + offt, idx, func); - if (jzpc->info->version >= ID_X1000) { + if (is_soc_or_above(jzpc, ID_X1000)) { ingenic_shadow_config_pin(jzpc, pin, JZ4770_GPIO_INT, false); ingenic_shadow_config_pin(jzpc, pin, GPIO_MSK, false); ingenic_shadow_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, func & 0x2); ingenic_shadow_config_pin(jzpc, pin, JZ4770_GPIO_PAT0, func & 0x1); ingenic_shadow_config_pin_load(jzpc, pin); - } else if (jzpc->info->version >= ID_JZ4770) { + } else if (is_soc_or_above(jzpc, ID_JZ4770)) { ingenic_config_pin(jzpc, pin, JZ4770_GPIO_INT, false); ingenic_config_pin(jzpc, pin, GPIO_MSK, false); ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, func & 0x2); ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT0, func & 0x1); - } else if (jzpc->info->version >= ID_JZ4740) { + } else if (is_soc_or_above(jzpc, ID_JZ4740)) { ingenic_config_pin(jzpc, pin, JZ4740_GPIO_FUNC, true); ingenic_config_pin(jzpc, pin, JZ4740_GPIO_TRIG, func & 0x2); ingenic_config_pin(jzpc, pin, JZ4740_GPIO_SELECT, func & 0x1); @@ -3738,16 +3762,16 @@ static int ingenic_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev, dev_dbg(pctldev->dev, "set pin P%c%u to %sput\n", 'A' + offt, idx, input ? "in" : "out"); - if (jzpc->info->version >= ID_X1000) { + if (is_soc_or_above(jzpc, ID_X1000)) { ingenic_shadow_config_pin(jzpc, pin, JZ4770_GPIO_INT, false); ingenic_shadow_config_pin(jzpc, pin, GPIO_MSK, true); ingenic_shadow_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, input); ingenic_shadow_config_pin_load(jzpc, pin); - } else if (jzpc->info->version >= ID_JZ4770) { + } else if (is_soc_or_above(jzpc, ID_JZ4770)) { ingenic_config_pin(jzpc, pin, JZ4770_GPIO_INT, false); ingenic_config_pin(jzpc, pin, GPIO_MSK, true); ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, input); - } else if (jzpc->info->version >= ID_JZ4740) { + } else if (is_soc_or_above(jzpc, ID_JZ4740)) { ingenic_config_pin(jzpc, pin, JZ4740_GPIO_SELECT, false); ingenic_config_pin(jzpc, pin, JZ4740_GPIO_DIR, !input); ingenic_config_pin(jzpc, pin, JZ4740_GPIO_FUNC, false); @@ -3779,7 +3803,7 @@ static int ingenic_pinconf_get(struct pinctrl_dev *pctldev, unsigned int bias, reg; bool pull, pullup, pulldown; - if (jzpc->info->version >= ID_X2000) { + if (is_soc_or_above(jzpc, ID_X2000)) { pullup = ingenic_get_pin_config(jzpc, pin, X2000_GPIO_PEPU) && !ingenic_get_pin_config(jzpc, pin, X2000_GPIO_PEPD) && (jzpc->info->pull_ups[offt] & BIT(idx)); @@ -3787,7 +3811,7 @@ static int ingenic_pinconf_get(struct pinctrl_dev *pctldev, !ingenic_get_pin_config(jzpc, pin, X2000_GPIO_PEPU) && (jzpc->info->pull_downs[offt] & BIT(idx)); - } else if (jzpc->info->version >= ID_X1830) { + } else if (is_soc_or_above(jzpc, ID_X1830)) { unsigned int half = PINS_PER_GPIO_CHIP / 2; unsigned int idxh = (pin % half) * 2; @@ -3804,9 +3828,9 @@ static int ingenic_pinconf_get(struct pinctrl_dev *pctldev, pulldown = (bias == GPIO_PULL_DOWN) && (jzpc->info->pull_downs[offt] & BIT(idx)); } else { - if (jzpc->info->version >= ID_JZ4770) + if (is_soc_or_above(jzpc, ID_JZ4770)) pull = !ingenic_get_pin_config(jzpc, pin, JZ4770_GPIO_PEN); - else if (jzpc->info->version >= ID_JZ4740) + else if (is_soc_or_above(jzpc, ID_JZ4740)) pull = !ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_PULL_DIS); else pull = ingenic_get_pin_config(jzpc, pin, JZ4730_GPIO_GPPUR); @@ -3835,9 +3859,9 @@ static int ingenic_pinconf_get(struct pinctrl_dev *pctldev, break; case PIN_CONFIG_INPUT_SCHMITT_ENABLE: - if (jzpc->info->version >= ID_X2000) + if (is_soc_or_above(jzpc, ID_X2000)) reg = X2000_GPIO_SMT; - else if (jzpc->info->version >= ID_X1830) + else if (is_soc_or_above(jzpc, ID_X1830)) reg = X1830_GPIO_SMT; else return -EINVAL; @@ -3846,9 +3870,9 @@ static int ingenic_pinconf_get(struct pinctrl_dev *pctldev, break; case PIN_CONFIG_SLEW_RATE: - if (jzpc->info->version >= ID_X2000) + if (is_soc_or_above(jzpc, ID_X2000)) reg = X2000_GPIO_SR; - else if (jzpc->info->version >= ID_X1830) + else if (is_soc_or_above(jzpc, ID_X1830)) reg = X1830_GPIO_SR; else return -EINVAL; @@ -3867,7 +3891,7 @@ static int ingenic_pinconf_get(struct pinctrl_dev *pctldev, static void ingenic_set_bias(struct ingenic_pinctrl *jzpc, unsigned int pin, unsigned int bias) { - if (jzpc->info->version >= ID_X2000) { + if (is_soc_or_above(jzpc, ID_X2000)) { switch (bias) { case GPIO_PULL_UP: ingenic_config_pin(jzpc, pin, X2000_GPIO_PEPD, false); @@ -3885,7 +3909,7 @@ static void ingenic_set_bias(struct ingenic_pinctrl *jzpc, ingenic_config_pin(jzpc, pin, X2000_GPIO_PEPD, false); } - } else if (jzpc->info->version >= ID_X1830) { + } else if (is_soc_or_above(jzpc, ID_X1830)) { unsigned int idx = pin % PINS_PER_GPIO_CHIP; unsigned int half = PINS_PER_GPIO_CHIP / 2; unsigned int idxh = (pin % half) * 2; @@ -3903,9 +3927,9 @@ static void ingenic_set_bias(struct ingenic_pinctrl *jzpc, REG_SET(X1830_GPIO_PEH), bias << idxh); } - } else if (jzpc->info->version >= ID_JZ4770) { + } else if (is_soc_or_above(jzpc, ID_JZ4770)) { ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PEN, !bias); - } else if (jzpc->info->version >= ID_JZ4740) { + } else if (is_soc_or_above(jzpc, ID_JZ4740)) { ingenic_config_pin(jzpc, pin, JZ4740_GPIO_PULL_DIS, !bias); } else { ingenic_config_pin(jzpc, pin, JZ4730_GPIO_GPPUR, bias); @@ -3915,7 +3939,7 @@ static void ingenic_set_bias(struct ingenic_pinctrl *jzpc, static void ingenic_set_schmitt_trigger(struct ingenic_pinctrl *jzpc, unsigned int pin, bool enable) { - if (jzpc->info->version >= ID_X2000) + if (is_soc_or_above(jzpc, ID_X2000)) ingenic_config_pin(jzpc, pin, X2000_GPIO_SMT, enable); else ingenic_config_pin(jzpc, pin, X1830_GPIO_SMT, enable); @@ -3924,9 +3948,9 @@ static void ingenic_set_schmitt_trigger(struct ingenic_pinctrl *jzpc, static void ingenic_set_output_level(struct ingenic_pinctrl *jzpc, unsigned int pin, bool high) { - if (jzpc->info->version >= ID_JZ4770) + if (is_soc_or_above(jzpc, ID_JZ4770)) ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT0, high); - else if (jzpc->info->version >= ID_JZ4740) + else if (is_soc_or_above(jzpc, ID_JZ4740)) ingenic_config_pin(jzpc, pin, JZ4740_GPIO_DATA, high); else ingenic_config_pin(jzpc, pin, JZ4730_GPIO_DATA, high); @@ -3935,7 +3959,7 @@ static void ingenic_set_output_level(struct ingenic_pinctrl *jzpc, static void ingenic_set_slew_rate(struct ingenic_pinctrl *jzpc, unsigned int pin, unsigned int slew) { - if (jzpc->info->version >= ID_X2000) + if (is_soc_or_above(jzpc, ID_X2000)) ingenic_config_pin(jzpc, pin, X2000_GPIO_SR, slew); else ingenic_config_pin(jzpc, pin, X1830_GPIO_SR, slew); @@ -3991,7 +4015,7 @@ static int ingenic_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, break; case PIN_CONFIG_INPUT_SCHMITT_ENABLE: - if (jzpc->info->version < ID_X1830) + if (!is_soc_or_above(jzpc, ID_X1830)) return -EINVAL; ingenic_set_schmitt_trigger(jzpc, pin, arg); @@ -4006,7 +4030,7 @@ static int ingenic_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, break; case PIN_CONFIG_SLEW_RATE: - if (jzpc->info->version < ID_X1830) + if (!is_soc_or_above(jzpc, ID_X1830)) return -EINVAL; ingenic_set_slew_rate(jzpc, pin, arg); diff --git a/drivers/pinctrl/pinctrl-max77620.c b/drivers/pinctrl/pinctrl-max77620.c index 1ee94574f0af..ab723ab4ec1d 100644 --- a/drivers/pinctrl/pinctrl-max77620.c +++ b/drivers/pinctrl/pinctrl-max77620.c @@ -668,5 +668,4 @@ module_platform_driver(max77620_pinctrl_driver); MODULE_DESCRIPTION("MAX77620/MAX20024 pin control driver"); MODULE_AUTHOR("Chaitanya Bandi<bandik@nvidia.com>"); MODULE_AUTHOR("Laxman Dewangan<ldewangan@nvidia.com>"); -MODULE_ALIAS("platform:max77620-pinctrl"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c index 003fb0e34153..1bdced67464b 100644 --- a/drivers/pinctrl/pinctrl-ocelot.c +++ b/drivers/pinctrl/pinctrl-ocelot.c @@ -60,6 +60,7 @@ enum { FUNC_CAN0_a, FUNC_CAN0_b, FUNC_CAN1, + FUNC_CLKMON, FUNC_NONE, FUNC_FC0_a, FUNC_FC0_b, @@ -137,6 +138,8 @@ enum { FUNC_PTPSYNC_6, FUNC_PTPSYNC_7, FUNC_PWM, + FUNC_PWM_a, + FUNC_PWM_b, FUNC_QSPI1, FUNC_QSPI2, FUNC_R, @@ -183,6 +186,7 @@ static const char *const ocelot_function_names[] = { [FUNC_CAN0_a] = "can0_a", [FUNC_CAN0_b] = "can0_b", [FUNC_CAN1] = "can1", + [FUNC_CLKMON] = "clkmon", [FUNC_NONE] = "none", [FUNC_FC0_a] = "fc0_a", [FUNC_FC0_b] = "fc0_b", @@ -260,6 +264,8 @@ static const char *const ocelot_function_names[] = { [FUNC_PTPSYNC_6] = "ptpsync_6", [FUNC_PTPSYNC_7] = "ptpsync_7", [FUNC_PWM] = "pwm", + [FUNC_PWM_a] = "pwm_a", + [FUNC_PWM_b] = "pwm_b", [FUNC_QSPI1] = "qspi1", [FUNC_QSPI2] = "qspi2", [FUNC_R] = "reserved", @@ -975,11 +981,11 @@ LAN966X_P(23, GPIO, NONE, NONE, NONE, OB_TRG_a, NONE, NON LAN966X_P(24, GPIO, FC0_b, IB_TRG_a, USB_H_c, OB_TRG_a, IRQ_IN_c, TACHO_a, R); LAN966X_P(25, GPIO, FC0_b, IB_TRG_a, USB_H_c, OB_TRG_a, IRQ_OUT_c, SFP_SD, R); LAN966X_P(26, GPIO, FC0_b, IB_TRG_a, USB_S_c, OB_TRG_a, CAN0_a, SFP_SD, R); -LAN966X_P(27, GPIO, NONE, NONE, NONE, OB_TRG_a, CAN0_a, NONE, R); +LAN966X_P(27, GPIO, NONE, NONE, NONE, OB_TRG_a, CAN0_a, PWM_a, R); LAN966X_P(28, GPIO, MIIM_a, NONE, NONE, OB_TRG_a, IRQ_OUT_c, SFP_SD, R); LAN966X_P(29, GPIO, MIIM_a, NONE, NONE, OB_TRG_a, NONE, NONE, R); -LAN966X_P(30, GPIO, FC3_c, CAN1, NONE, OB_TRG, RECO_b, NONE, R); -LAN966X_P(31, GPIO, FC3_c, CAN1, NONE, OB_TRG, RECO_b, NONE, R); +LAN966X_P(30, GPIO, FC3_c, CAN1, CLKMON, OB_TRG, RECO_b, NONE, R); +LAN966X_P(31, GPIO, FC3_c, CAN1, CLKMON, OB_TRG, RECO_b, NONE, R); LAN966X_P(32, GPIO, FC3_c, NONE, SGPIO_a, NONE, MIIM_Sa, NONE, R); LAN966X_P(33, GPIO, FC1_b, NONE, SGPIO_a, NONE, MIIM_Sa, MIIM_b, R); LAN966X_P(34, GPIO, FC1_b, NONE, SGPIO_a, NONE, MIIM_Sa, MIIM_b, R); @@ -999,7 +1005,7 @@ LAN966X_P(47, GPIO, FC1_c, OB_TRG_b, IB_TRG_b, IRQ_OUT_a, FC_SHRD5, IRQ_IN LAN966X_P(48, GPIO, FC1_c, OB_TRG_b, IB_TRG_b, IRQ_OUT_a, FC_SHRD6, IRQ_IN_a, R); LAN966X_P(49, GPIO, FC_SHRD7, OB_TRG_b, IB_TRG_b, IRQ_OUT_a, TWI_SLC_GATE, IRQ_IN_a, R); LAN966X_P(50, GPIO, FC_SHRD16, OB_TRG_b, IB_TRG_b, IRQ_OUT_a, TWI_SLC_GATE, NONE, R); -LAN966X_P(51, GPIO, FC3_b, OB_TRG_b, IB_TRG_c, IRQ_OUT_b, NONE, IRQ_IN_b, R); +LAN966X_P(51, GPIO, FC3_b, OB_TRG_b, IB_TRG_c, IRQ_OUT_b, PWM_b, IRQ_IN_b, R); LAN966X_P(52, GPIO, FC3_b, OB_TRG_b, IB_TRG_c, IRQ_OUT_b, TACHO_b, IRQ_IN_b, R); LAN966X_P(53, GPIO, FC3_b, OB_TRG_b, IB_TRG_c, IRQ_OUT_b, NONE, IRQ_IN_b, R); LAN966X_P(54, GPIO, FC_SHRD8, OB_TRG_b, IB_TRG_c, IRQ_OUT_b, TWI_SLC_GATE, IRQ_IN_b, R); diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index a1b598b86aa9..06fa3fb0a136 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -2095,19 +2095,20 @@ static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl, return false; } -static int rockchip_pinconf_defer_output(struct rockchip_pin_bank *bank, - unsigned int pin, u32 arg) +static int rockchip_pinconf_defer_pin(struct rockchip_pin_bank *bank, + unsigned int pin, u32 param, u32 arg) { - struct rockchip_pin_output_deferred *cfg; + struct rockchip_pin_deferred *cfg; cfg = kzalloc(sizeof(*cfg), GFP_KERNEL); if (!cfg) return -ENOMEM; cfg->pin = pin; + cfg->param = param; cfg->arg = arg; - list_add_tail(&cfg->head, &bank->deferred_output); + list_add_tail(&cfg->head, &bank->deferred_pins); return 0; } @@ -2128,6 +2129,25 @@ static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, param = pinconf_to_config_param(configs[i]); arg = pinconf_to_config_argument(configs[i]); + if (param == PIN_CONFIG_OUTPUT || param == PIN_CONFIG_INPUT_ENABLE) { + /* + * Check for gpio driver not being probed yet. + * The lock makes sure that either gpio-probe has completed + * or the gpio driver hasn't probed yet. + */ + mutex_lock(&bank->deferred_lock); + if (!gpio || !gpio->direction_output) { + rc = rockchip_pinconf_defer_pin(bank, pin - bank->pin_base, param, + arg); + mutex_unlock(&bank->deferred_lock); + if (rc) + return rc; + + break; + } + mutex_unlock(&bank->deferred_lock); + } + switch (param) { case PIN_CONFIG_BIAS_DISABLE: rc = rockchip_set_pull(bank, pin - bank->pin_base, @@ -2156,27 +2176,21 @@ static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, if (rc != RK_FUNC_GPIO) return -EINVAL; - /* - * Check for gpio driver not being probed yet. - * The lock makes sure that either gpio-probe has completed - * or the gpio driver hasn't probed yet. - */ - mutex_lock(&bank->deferred_lock); - if (!gpio || !gpio->direction_output) { - rc = rockchip_pinconf_defer_output(bank, pin - bank->pin_base, arg); - mutex_unlock(&bank->deferred_lock); - if (rc) - return rc; - - break; - } - mutex_unlock(&bank->deferred_lock); - rc = gpio->direction_output(gpio, pin - bank->pin_base, arg); if (rc) return rc; break; + case PIN_CONFIG_INPUT_ENABLE: + rc = rockchip_set_mux(bank, pin - bank->pin_base, + RK_FUNC_GPIO); + if (rc != RK_FUNC_GPIO) + return -EINVAL; + + rc = gpio->direction_input(gpio, pin - bank->pin_base); + if (rc) + return rc; + break; case PIN_CONFIG_DRIVE_STRENGTH: /* rk3288 is the first with per-pin drive-strength */ if (!info->ctrl->drv_calc_reg) @@ -2485,7 +2499,7 @@ static int rockchip_pinctrl_register(struct platform_device *pdev, pdesc++; } - INIT_LIST_HEAD(&pin_bank->deferred_output); + INIT_LIST_HEAD(&pin_bank->deferred_pins); mutex_init(&pin_bank->deferred_lock); } @@ -2748,7 +2762,7 @@ static int rockchip_pinctrl_remove(struct platform_device *pdev) { struct rockchip_pinctrl *info = platform_get_drvdata(pdev); struct rockchip_pin_bank *bank; - struct rockchip_pin_output_deferred *cfg; + struct rockchip_pin_deferred *cfg; int i; of_platform_depopulate(&pdev->dev); @@ -2757,9 +2771,9 @@ static int rockchip_pinctrl_remove(struct platform_device *pdev) bank = &info->ctrl->pin_banks[i]; mutex_lock(&bank->deferred_lock); - while (!list_empty(&bank->deferred_output)) { - cfg = list_first_entry(&bank->deferred_output, - struct rockchip_pin_output_deferred, head); + while (!list_empty(&bank->deferred_pins)) { + cfg = list_first_entry(&bank->deferred_pins, + struct rockchip_pin_deferred, head); list_del(&cfg->head); kfree(cfg); } diff --git a/drivers/pinctrl/pinctrl-rockchip.h b/drivers/pinctrl/pinctrl-rockchip.h index 91f10279d084..98a01a616da6 100644 --- a/drivers/pinctrl/pinctrl-rockchip.h +++ b/drivers/pinctrl/pinctrl-rockchip.h @@ -171,7 +171,7 @@ struct rockchip_pin_bank { u32 toggle_edge_mode; u32 recalced_mask; u32 route_mask; - struct list_head deferred_output; + struct list_head deferred_pins; struct mutex deferred_lock; }; @@ -247,9 +247,12 @@ struct rockchip_pin_config { unsigned int nconfigs; }; -struct rockchip_pin_output_deferred { +enum pin_config_param; + +struct rockchip_pin_deferred { struct list_head head; unsigned int pin; + enum pin_config_param param; u32 arg; }; diff --git a/drivers/pinctrl/pinctrl-thunderbay.c b/drivers/pinctrl/pinctrl-thunderbay.c index 79d44bca039e..9328b17485cf 100644 --- a/drivers/pinctrl/pinctrl-thunderbay.c +++ b/drivers/pinctrl/pinctrl-thunderbay.c @@ -1229,7 +1229,6 @@ static int thunderbay_pinctrl_probe(struct platform_device *pdev) const struct of_device_id *of_id; struct device *dev = &pdev->dev; struct thunderbay_pinctrl *tpc; - struct resource *iomem; int ret; of_id = of_match_node(thunderbay_pinctrl_match, pdev->dev.of_node); @@ -1243,11 +1242,7 @@ static int thunderbay_pinctrl_probe(struct platform_device *pdev) tpc->dev = dev; tpc->soc = of_id->data; - iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!iomem) - return -ENXIO; - - tpc->base0 = devm_ioremap_resource(dev, iomem); + tpc->base0 = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(tpc->base0)) return PTR_ERR(tpc->base0); diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index c51ef54a9f61..3daeb9772391 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -239,6 +239,15 @@ config PINCTRL_SC7280 Qualcomm Technologies Inc TLMM block found on the Qualcomm Technologies Inc SC7280 platform. +config PINCTRL_SC7280_LPASS_LPI + tristate "Qualcomm Technologies Inc SC7280 LPASS LPI pin controller driver" + depends on GPIOLIB + depends on PINCTRL_LPASS_LPI + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI + (Low Power Island) found on the Qualcomm Technologies Inc SC7280 platform. + config PINCTRL_SC8180X tristate "Qualcomm Technologies Inc SC8180x pin controller driver" depends on (OF || ACPI) @@ -338,6 +347,15 @@ config PINCTRL_SM8250 Qualcomm Technologies Inc TLMM block found on the Qualcomm Technologies Inc SM8250 platform. +config PINCTRL_SM8250_LPASS_LPI + tristate "Qualcomm Technologies Inc SM8250 LPASS LPI pin controller driver" + depends on GPIOLIB + depends on PINCTRL_LPASS_LPI + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI + (Low Power Island) found on the Qualcomm Technologies Inc SM8250 platform. + config PINCTRL_SM8350 tristate "Qualcomm Technologies Inc SM8350 pin controller driver" depends on PINCTRL_MSM @@ -360,6 +378,7 @@ config PINCTRL_LPASS_LPI select PINMUX select PINCONF select GENERIC_PINCONF + select GENERIC_PINCTRL_GROUPS depends on GPIOLIB help This is the pinctrl, pinmux, pinconf and gpiolib driver for the diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 5efbfd9f6248..4f0ee7597f81 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-mpp.o obj-$(CONFIG_PINCTRL_SC7180) += pinctrl-sc7180.o obj-$(CONFIG_PINCTRL_SC7280) += pinctrl-sc7280.o +obj-$(CONFIG_PINCTRL_SC7280_LPASS_LPI) += pinctrl-sc7280-lpass-lpi.o obj-$(CONFIG_PINCTRL_SC8180X) += pinctrl-sc8180x.o obj-$(CONFIG_PINCTRL_SC8280XP) += pinctrl-sc8280xp.o obj-$(CONFIG_PINCTRL_SDM660) += pinctrl-sdm660.o @@ -39,6 +40,7 @@ obj-$(CONFIG_PINCTRL_SM6350) += pinctrl-sm6350.o obj-$(CONFIG_PINCTRL_SDX65) += pinctrl-sdx65.o obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o +obj-$(CONFIG_PINCTRL_SM8250_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o obj-$(CONFIG_PINCTRL_SM8450) += pinctrl-sm8450.o obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c index 2f19ab4db720..74810ec4df44 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c @@ -4,93 +4,15 @@ * Copyright (c) 2020 Linaro Ltd. */ -#include <linux/bitops.h> -#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/gpio/driver.h> -#include <linux/io.h> #include <linux/module.h> #include <linux/of_device.h> -#include <linux/of.h> #include <linux/pinctrl/pinconf-generic.h> #include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinmux.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/types.h> -#include "../core.h" #include "../pinctrl-utils.h" - -#define LPI_SLEW_RATE_CTL_REG 0xa000 -#define LPI_TLMM_REG_OFFSET 0x1000 -#define LPI_SLEW_RATE_MAX 0x03 -#define LPI_SLEW_BITS_SIZE 0x02 -#define LPI_SLEW_RATE_MASK GENMASK(1, 0) -#define LPI_GPIO_CFG_REG 0x00 -#define LPI_GPIO_PULL_MASK GENMASK(1, 0) -#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2) -#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6) -#define LPI_GPIO_OE_MASK BIT(9) -#define LPI_GPIO_VALUE_REG 0x04 -#define LPI_GPIO_VALUE_IN_MASK BIT(0) -#define LPI_GPIO_VALUE_OUT_MASK BIT(1) - -#define LPI_GPIO_BIAS_DISABLE 0x0 -#define LPI_GPIO_PULL_DOWN 0x1 -#define LPI_GPIO_KEEPER 0x2 -#define LPI_GPIO_PULL_UP 0x3 -#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1) -#define NO_SLEW -1 - -#define LPI_FUNCTION(fname) \ - [LPI_MUX_##fname] = { \ - .name = #fname, \ - .groups = fname##_groups, \ - .ngroups = ARRAY_SIZE(fname##_groups), \ - } - -#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ - { \ - .name = "gpio" #id, \ - .pins = gpio##id##_pins, \ - .pin = id, \ - .slew_offset = soff, \ - .npins = ARRAY_SIZE(gpio##id##_pins), \ - .funcs = (int[]){ \ - LPI_MUX_gpio, \ - LPI_MUX_##f1, \ - LPI_MUX_##f2, \ - LPI_MUX_##f3, \ - LPI_MUX_##f4, \ - }, \ - .nfuncs = 5, \ - } - -struct lpi_pingroup { - const char *name; - const unsigned int *pins; - unsigned int npins; - unsigned int pin; - /* Bit offset in slew register for SoundWire pins only */ - int slew_offset; - unsigned int *funcs; - unsigned int nfuncs; -}; - -struct lpi_function { - const char *name; - const char * const *groups; - unsigned int ngroups; -}; - -struct lpi_pinctrl_variant_data { - const struct pinctrl_pin_desc *pins; - int npins; - const struct lpi_pingroup *groups; - int ngroups; - const struct lpi_function *functions; - int nfunctions; -}; +#include "pinctrl-lpass-lpi.h" #define MAX_LPI_NUM_CLKS 2 @@ -106,136 +28,6 @@ struct lpi_pinctrl { const struct lpi_pinctrl_variant_data *data; }; -/* sm8250 variant specific data */ -static const struct pinctrl_pin_desc sm8250_lpi_pins[] = { - PINCTRL_PIN(0, "gpio0"), - PINCTRL_PIN(1, "gpio1"), - PINCTRL_PIN(2, "gpio2"), - PINCTRL_PIN(3, "gpio3"), - PINCTRL_PIN(4, "gpio4"), - PINCTRL_PIN(5, "gpio5"), - PINCTRL_PIN(6, "gpio6"), - PINCTRL_PIN(7, "gpio7"), - PINCTRL_PIN(8, "gpio8"), - PINCTRL_PIN(9, "gpio9"), - PINCTRL_PIN(10, "gpio10"), - PINCTRL_PIN(11, "gpio11"), - PINCTRL_PIN(12, "gpio12"), - PINCTRL_PIN(13, "gpio13"), -}; - -enum sm8250_lpi_functions { - LPI_MUX_dmic1_clk, - LPI_MUX_dmic1_data, - LPI_MUX_dmic2_clk, - LPI_MUX_dmic2_data, - LPI_MUX_dmic3_clk, - LPI_MUX_dmic3_data, - LPI_MUX_i2s1_clk, - LPI_MUX_i2s1_data, - LPI_MUX_i2s1_ws, - LPI_MUX_i2s2_clk, - LPI_MUX_i2s2_data, - LPI_MUX_i2s2_ws, - LPI_MUX_qua_mi2s_data, - LPI_MUX_qua_mi2s_sclk, - LPI_MUX_qua_mi2s_ws, - LPI_MUX_swr_rx_clk, - LPI_MUX_swr_rx_data, - LPI_MUX_swr_tx_clk, - LPI_MUX_swr_tx_data, - LPI_MUX_wsa_swr_clk, - LPI_MUX_wsa_swr_data, - LPI_MUX_gpio, - LPI_MUX__, -}; - -static const unsigned int gpio0_pins[] = { 0 }; -static const unsigned int gpio1_pins[] = { 1 }; -static const unsigned int gpio2_pins[] = { 2 }; -static const unsigned int gpio3_pins[] = { 3 }; -static const unsigned int gpio4_pins[] = { 4 }; -static const unsigned int gpio5_pins[] = { 5 }; -static const unsigned int gpio6_pins[] = { 6 }; -static const unsigned int gpio7_pins[] = { 7 }; -static const unsigned int gpio8_pins[] = { 8 }; -static const unsigned int gpio9_pins[] = { 9 }; -static const unsigned int gpio10_pins[] = { 10 }; -static const unsigned int gpio11_pins[] = { 11 }; -static const unsigned int gpio12_pins[] = { 12 }; -static const unsigned int gpio13_pins[] = { 13 }; -static const char * const swr_tx_clk_groups[] = { "gpio0" }; -static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" }; -static const char * const swr_rx_clk_groups[] = { "gpio3" }; -static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" }; -static const char * const dmic1_clk_groups[] = { "gpio6" }; -static const char * const dmic1_data_groups[] = { "gpio7" }; -static const char * const dmic2_clk_groups[] = { "gpio8" }; -static const char * const dmic2_data_groups[] = { "gpio9" }; -static const char * const i2s2_clk_groups[] = { "gpio10" }; -static const char * const i2s2_ws_groups[] = { "gpio11" }; -static const char * const dmic3_clk_groups[] = { "gpio12" }; -static const char * const dmic3_data_groups[] = { "gpio13" }; -static const char * const qua_mi2s_sclk_groups[] = { "gpio0" }; -static const char * const qua_mi2s_ws_groups[] = { "gpio1" }; -static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" }; -static const char * const i2s1_clk_groups[] = { "gpio6" }; -static const char * const i2s1_ws_groups[] = { "gpio7" }; -static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" }; -static const char * const wsa_swr_clk_groups[] = { "gpio10" }; -static const char * const wsa_swr_data_groups[] = { "gpio11" }; -static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" }; - -static const struct lpi_pingroup sm8250_groups[] = { - LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _), - LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _), - LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _), - LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _), - LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _), - LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _), - LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _, _), - LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _), - LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _), - LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _), - LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _), - LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _), - LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _), - LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _), -}; - -static const struct lpi_function sm8250_functions[] = { - LPI_FUNCTION(dmic1_clk), - LPI_FUNCTION(dmic1_data), - LPI_FUNCTION(dmic2_clk), - LPI_FUNCTION(dmic2_data), - LPI_FUNCTION(dmic3_clk), - LPI_FUNCTION(dmic3_data), - LPI_FUNCTION(i2s1_clk), - LPI_FUNCTION(i2s1_data), - LPI_FUNCTION(i2s1_ws), - LPI_FUNCTION(i2s2_clk), - LPI_FUNCTION(i2s2_data), - LPI_FUNCTION(i2s2_ws), - LPI_FUNCTION(qua_mi2s_data), - LPI_FUNCTION(qua_mi2s_sclk), - LPI_FUNCTION(qua_mi2s_ws), - LPI_FUNCTION(swr_rx_clk), - LPI_FUNCTION(swr_rx_data), - LPI_FUNCTION(swr_tx_clk), - LPI_FUNCTION(swr_tx_data), - LPI_FUNCTION(wsa_swr_clk), - LPI_FUNCTION(wsa_swr_data), -}; - -static struct lpi_pinctrl_variant_data sm8250_lpi_data = { - .pins = sm8250_lpi_pins, - .npins = ARRAY_SIZE(sm8250_lpi_pins), - .groups = sm8250_groups, - .ngroups = ARRAY_SIZE(sm8250_groups), - .functions = sm8250_functions, - .nfunctions = ARRAY_SIZE(sm8250_functions), -}; - static int lpi_gpio_read(struct lpi_pinctrl *state, unsigned int pin, unsigned int addr) { @@ -250,38 +42,10 @@ static int lpi_gpio_write(struct lpi_pinctrl *state, unsigned int pin, return 0; } -static int lpi_gpio_get_groups_count(struct pinctrl_dev *pctldev) -{ - struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); - - return pctrl->data->ngroups; -} - -static const char *lpi_gpio_get_group_name(struct pinctrl_dev *pctldev, - unsigned int group) -{ - struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); - - return pctrl->data->groups[group].name; -} - -static int lpi_gpio_get_group_pins(struct pinctrl_dev *pctldev, - unsigned int group, - const unsigned int **pins, - unsigned int *num_pins) -{ - struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); - - *pins = pctrl->data->groups[group].pins; - *num_pins = pctrl->data->groups[group].npins; - - return 0; -} - static const struct pinctrl_ops lpi_gpio_pinctrl_ops = { - .get_groups_count = lpi_gpio_get_groups_count, - .get_group_name = lpi_gpio_get_group_name, - .get_group_pins = lpi_gpio_get_group_pins, + .get_groups_count = pinctrl_generic_get_group_count, + .get_group_name = pinctrl_generic_get_group_name, + .get_group_pins = pinctrl_generic_get_group_pins, .dt_node_to_map = pinconf_generic_dt_node_to_map_group, .dt_free_map = pinctrl_utils_free_map, }; @@ -435,7 +199,7 @@ static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group, } slew_offset = g->slew_offset; - if (slew_offset == NO_SLEW) + if (slew_offset == LPI_NO_SLEW) break; mutex_lock(&pctrl->slew_access_lock); @@ -582,7 +346,29 @@ static const struct gpio_chip lpi_gpio_template = { .dbg_show = lpi_gpio_dbg_show, }; -static int lpi_pinctrl_probe(struct platform_device *pdev) +static int lpi_build_pin_desc_groups(struct lpi_pinctrl *pctrl) +{ + int i, ret; + + for (i = 0; i < pctrl->data->npins; i++) { + const struct pinctrl_pin_desc *pin_info = pctrl->desc.pins + i; + + ret = pinctrl_generic_add_group(pctrl->ctrl, pin_info->name, + (int *)&pin_info->number, 1, NULL); + if (ret < 0) + goto err_pinctrl; + } + + return 0; + +err_pinctrl: + for (; i > 0; i--) + pinctrl_generic_remove_group(pctrl->ctrl, i - 1); + + return ret; +} + +int lpi_pinctrl_probe(struct platform_device *pdev) { const struct lpi_pinctrl_variant_data *data; struct device *dev = &pdev->dev; @@ -615,9 +401,13 @@ static int lpi_pinctrl_probe(struct platform_device *pdev) return dev_err_probe(dev, PTR_ERR(pctrl->slew_base), "Slew resource not provided\n"); - ret = devm_clk_bulk_get(dev, MAX_LPI_NUM_CLKS, pctrl->clks); + if (data->is_clk_optional) + ret = devm_clk_bulk_get_optional(dev, MAX_LPI_NUM_CLKS, pctrl->clks); + else + ret = devm_clk_bulk_get(dev, MAX_LPI_NUM_CLKS, pctrl->clks); + if (ret) - return dev_err_probe(dev, ret, "Can't get clocks\n"); + return ret; ret = clk_bulk_prepare_enable(MAX_LPI_NUM_CLKS, pctrl->clks); if (ret) @@ -647,6 +437,10 @@ static int lpi_pinctrl_probe(struct platform_device *pdev) goto err_pinctrl; } + ret = lpi_build_pin_desc_groups(pctrl); + if (ret) + goto err_pinctrl; + ret = devm_gpiochip_add_data(dev, &pctrl->chip, pctrl); if (ret) { dev_err(pctrl->dev, "can't add gpio chip\n"); @@ -661,35 +455,22 @@ err_pinctrl: return ret; } +EXPORT_SYMBOL_GPL(lpi_pinctrl_probe); -static int lpi_pinctrl_remove(struct platform_device *pdev) +int lpi_pinctrl_remove(struct platform_device *pdev) { struct lpi_pinctrl *pctrl = platform_get_drvdata(pdev); + int i; mutex_destroy(&pctrl->slew_access_lock); clk_bulk_disable_unprepare(MAX_LPI_NUM_CLKS, pctrl->clks); + for (i = 0; i < pctrl->data->npins; i++) + pinctrl_generic_remove_group(pctrl->ctrl, i); + return 0; } +EXPORT_SYMBOL_GPL(lpi_pinctrl_remove); -static const struct of_device_id lpi_pinctrl_of_match[] = { - { - .compatible = "qcom,sm8250-lpass-lpi-pinctrl", - .data = &sm8250_lpi_data, - }, - { } -}; -MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match); - -static struct platform_driver lpi_pinctrl_driver = { - .driver = { - .name = "qcom-lpass-lpi-pinctrl", - .of_match_table = lpi_pinctrl_of_match, - }, - .probe = lpi_pinctrl_probe, - .remove = lpi_pinctrl_remove, -}; - -module_platform_driver(lpi_pinctrl_driver); MODULE_DESCRIPTION("QTI LPI GPIO pin control driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h new file mode 100644 index 000000000000..759d5d8da562 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h @@ -0,0 +1,86 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020 Linaro Ltd. + */ +#ifndef __PINCTRL_LPASS_LPI_H__ +#define __PINCTRL_LPASS_LPI_H__ + +#include <linux/bitops.h> +#include <linux/bitfield.h> +#include "../core.h" + +#define LPI_SLEW_RATE_CTL_REG 0xa000 +#define LPI_TLMM_REG_OFFSET 0x1000 +#define LPI_SLEW_RATE_MAX 0x03 +#define LPI_SLEW_BITS_SIZE 0x02 +#define LPI_SLEW_RATE_MASK GENMASK(1, 0) +#define LPI_GPIO_CFG_REG 0x00 +#define LPI_GPIO_PULL_MASK GENMASK(1, 0) +#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2) +#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6) +#define LPI_GPIO_OE_MASK BIT(9) +#define LPI_GPIO_VALUE_REG 0x04 +#define LPI_GPIO_VALUE_IN_MASK BIT(0) +#define LPI_GPIO_VALUE_OUT_MASK BIT(1) + +#define LPI_GPIO_BIAS_DISABLE 0x0 +#define LPI_GPIO_PULL_DOWN 0x1 +#define LPI_GPIO_KEEPER 0x2 +#define LPI_GPIO_PULL_UP 0x3 +#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1) +#define LPI_NO_SLEW -1 + +#define LPI_FUNCTION(fname) \ + [LPI_MUX_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ + { \ + .group.name = "gpio" #id, \ + .group.pins = gpio##id##_pins, \ + .pin = id, \ + .slew_offset = soff, \ + .group.num_pins = ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + LPI_MUX_gpio, \ + LPI_MUX_##f1, \ + LPI_MUX_##f2, \ + LPI_MUX_##f3, \ + LPI_MUX_##f4, \ + }, \ + .nfuncs = 5, \ + } + +struct lpi_pingroup { + struct group_desc group; + unsigned int pin; + /* Bit offset in slew register for SoundWire pins only */ + int slew_offset; + unsigned int *funcs; + unsigned int nfuncs; +}; + +struct lpi_function { + const char *name; + const char * const *groups; + unsigned int ngroups; +}; + +struct lpi_pinctrl_variant_data { + const struct pinctrl_pin_desc *pins; + int npins; + const struct lpi_pingroup *groups; + int ngroups; + const struct lpi_function *functions; + int nfunctions; + bool is_clk_optional; +}; + +int lpi_pinctrl_probe(struct platform_device *pdev); +int lpi_pinctrl_remove(struct platform_device *pdev); + +#endif /*__PINCTRL_LPASS_LPI_H__*/ diff --git a/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c new file mode 100644 index 000000000000..2add9a4520c2 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. + * ALSA SoC platform-machine driver for QTi LPASS + */ + +#include <linux/gpio/driver.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include "pinctrl-lpass-lpi.h" + +enum lpass_lpi_functions { + LPI_MUX_dmic1_clk, + LPI_MUX_dmic1_data, + LPI_MUX_dmic2_clk, + LPI_MUX_dmic2_data, + LPI_MUX_dmic3_clk, + LPI_MUX_dmic3_data, + LPI_MUX_i2s1_clk, + LPI_MUX_i2s1_data, + LPI_MUX_i2s1_ws, + LPI_MUX_i2s2_clk, + LPI_MUX_i2s2_data, + LPI_MUX_i2s2_ws, + LPI_MUX_qua_mi2s_data, + LPI_MUX_qua_mi2s_sclk, + LPI_MUX_qua_mi2s_ws, + LPI_MUX_swr_rx_clk, + LPI_MUX_swr_rx_data, + LPI_MUX_swr_tx_clk, + LPI_MUX_swr_tx_data, + LPI_MUX_wsa_swr_clk, + LPI_MUX_wsa_swr_data, + LPI_MUX_gpio, + LPI_MUX__, +}; + +static int gpio0_pins[] = { 0 }; +static int gpio1_pins[] = { 1 }; +static int gpio2_pins[] = { 2 }; +static int gpio3_pins[] = { 3 }; +static int gpio4_pins[] = { 4 }; +static int gpio5_pins[] = { 5 }; +static int gpio6_pins[] = { 6 }; +static int gpio7_pins[] = { 7 }; +static int gpio8_pins[] = { 8 }; +static int gpio9_pins[] = { 9 }; +static int gpio10_pins[] = { 10 }; +static int gpio11_pins[] = { 11 }; +static int gpio12_pins[] = { 12 }; +static int gpio13_pins[] = { 13 }; +static int gpio14_pins[] = { 14 }; + +static const struct pinctrl_pin_desc sc7280_lpi_pins[] = { + PINCTRL_PIN(0, "gpio0"), + PINCTRL_PIN(1, "gpio1"), + PINCTRL_PIN(2, "gpio2"), + PINCTRL_PIN(3, "gpio3"), + PINCTRL_PIN(4, "gpio4"), + PINCTRL_PIN(5, "gpio5"), + PINCTRL_PIN(6, "gpio6"), + PINCTRL_PIN(7, "gpio7"), + PINCTRL_PIN(8, "gpio8"), + PINCTRL_PIN(9, "gpio9"), + PINCTRL_PIN(10, "gpio10"), + PINCTRL_PIN(11, "gpio11"), + PINCTRL_PIN(12, "gpio12"), + PINCTRL_PIN(13, "gpio13"), + PINCTRL_PIN(14, "gpio14"), +}; + +static const char * const swr_tx_clk_groups[] = { "gpio0" }; +static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio14" }; +static const char * const swr_rx_clk_groups[] = { "gpio3" }; +static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" }; +static const char * const dmic1_clk_groups[] = { "gpio6" }; +static const char * const dmic1_data_groups[] = { "gpio7" }; +static const char * const dmic2_clk_groups[] = { "gpio8" }; +static const char * const dmic2_data_groups[] = { "gpio9" }; +static const char * const i2s2_clk_groups[] = { "gpio10" }; +static const char * const i2s2_ws_groups[] = { "gpio11" }; +static const char * const dmic3_clk_groups[] = { "gpio12" }; +static const char * const dmic3_data_groups[] = { "gpio13" }; +static const char * const qua_mi2s_sclk_groups[] = { "gpio0" }; +static const char * const qua_mi2s_ws_groups[] = { "gpio1" }; +static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" }; +static const char * const i2s1_clk_groups[] = { "gpio6" }; +static const char * const i2s1_ws_groups[] = { "gpio7" }; +static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" }; +static const char * const wsa_swr_clk_groups[] = { "gpio10" }; +static const char * const wsa_swr_data_groups[] = { "gpio11" }; +static const char * const i2s2_data_groups[] = { "gpio12", "gpio13" }; + +static const struct lpi_pingroup sc7280_groups[] = { + LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _), + LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _), + LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _), + LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _), + LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _), + LPI_PINGROUP(5, 12, swr_rx_data, _, _, _), + LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _, _), + LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _), + LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _), + LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, _, _), + LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _), + LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _), + LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s2_data, _, _), + LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s2_data, _, _), + LPI_PINGROUP(14, 6, swr_tx_data, _, _, _), +}; + +static const struct lpi_function sc7280_functions[] = { + LPI_FUNCTION(dmic1_clk), + LPI_FUNCTION(dmic1_data), + LPI_FUNCTION(dmic2_clk), + LPI_FUNCTION(dmic2_data), + LPI_FUNCTION(dmic3_clk), + LPI_FUNCTION(dmic3_data), + LPI_FUNCTION(i2s1_clk), + LPI_FUNCTION(i2s1_data), + LPI_FUNCTION(i2s1_ws), + LPI_FUNCTION(i2s2_clk), + LPI_FUNCTION(i2s2_data), + LPI_FUNCTION(i2s2_ws), + LPI_FUNCTION(qua_mi2s_data), + LPI_FUNCTION(qua_mi2s_sclk), + LPI_FUNCTION(qua_mi2s_ws), + LPI_FUNCTION(swr_rx_clk), + LPI_FUNCTION(swr_rx_data), + LPI_FUNCTION(swr_tx_clk), + LPI_FUNCTION(swr_tx_data), + LPI_FUNCTION(wsa_swr_clk), + LPI_FUNCTION(wsa_swr_data), +}; + +static const struct lpi_pinctrl_variant_data sc7280_lpi_data = { + .pins = sc7280_lpi_pins, + .npins = ARRAY_SIZE(sc7280_lpi_pins), + .groups = sc7280_groups, + .ngroups = ARRAY_SIZE(sc7280_groups), + .functions = sc7280_functions, + .nfunctions = ARRAY_SIZE(sc7280_functions), + .is_clk_optional = true, +}; + +static const struct of_device_id lpi_pinctrl_of_match[] = { + { + .compatible = "qcom,sc7280-lpass-lpi-pinctrl", + .data = &sc7280_lpi_data, + }, + { } +}; +MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match); + +static struct platform_driver lpi_pinctrl_driver = { + .driver = { + .name = "qcom-sc7280-lpass-lpi-pinctrl", + .of_match_table = lpi_pinctrl_of_match, + }, + .probe = lpi_pinctrl_probe, + .remove = lpi_pinctrl_remove, +}; + +module_platform_driver(lpi_pinctrl_driver); +MODULE_DESCRIPTION("QTI SC7280 LPI GPIO pin control driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pinctrl/qcom/pinctrl-sm8150.c b/drivers/pinctrl/qcom/pinctrl-sm8150.c index 7359bae68c69..1cc622694553 100644 --- a/drivers/pinctrl/qcom/pinctrl-sm8150.c +++ b/drivers/pinctrl/qcom/pinctrl-sm8150.c @@ -1500,6 +1500,25 @@ static const struct msm_pingroup sm8150_groups[] = { [178] = SDC_QDSD_PINGROUP(sdc2_data, 0xB2000, 9, 0), }; +static const struct msm_gpio_wakeirq_map sm8150_pdc_map[] = { + { 3, 31 }, { 5, 32 }, { 8, 33 }, { 9, 34 }, { 10, 100 }, + { 12, 104 }, { 24, 37 }, { 26, 38 }, { 27, 41 }, { 28, 42 }, + { 30, 39 }, { 36, 43 }, { 37, 44 }, { 38, 30 }, { 39, 118 }, + { 39, 125 }, { 41, 47 }, { 42, 48 }, { 46, 50 }, { 47, 49 }, + { 48, 51 }, { 49, 53 }, { 50, 52 }, { 51, 116 }, { 51, 123 }, + { 53, 54 }, { 54, 55 }, { 55, 56 }, { 56, 57 }, { 58, 58 }, + { 60, 60 }, { 61, 61 }, { 68, 62 }, { 70, 63 }, { 76, 71 }, + { 77, 66 }, { 81, 64 }, { 83, 65 }, { 86, 67 }, { 87, 84 }, + { 88, 117 }, { 88, 124 }, { 90, 69 }, { 91, 70 }, { 93, 75 }, + { 95, 72 }, { 96, 73 }, { 97, 74 }, { 101, 40 }, { 103, 77 }, + { 104, 78 }, { 108, 79 }, { 112, 80 }, { 113, 81 }, { 114, 82 }, + { 117, 85 }, { 118, 101 }, { 119, 87 }, { 120, 88 }, { 121, 89 }, + { 122, 90 }, { 123, 91 }, { 124, 92 }, { 125, 93 }, { 129, 94 }, + { 132, 105 }, { 133, 83 }, { 134, 36 }, { 136, 97 }, { 142, 103 }, + { 144, 115 }, { 144, 122 }, { 147, 102 }, { 150, 107 }, + { 152, 108 }, { 153, 109 } +}; + static const struct msm_pinctrl_soc_data sm8150_pinctrl = { .pins = sm8150_pins, .npins = ARRAY_SIZE(sm8150_pins), @@ -1510,6 +1529,9 @@ static const struct msm_pinctrl_soc_data sm8150_pinctrl = { .ngpios = 176, .tiles = sm8150_tiles, .ntiles = ARRAY_SIZE(sm8150_tiles), + .wakeirq_map = sm8150_pdc_map, + .nwakeirq_map = ARRAY_SIZE(sm8150_pdc_map), + .wakeirq_dual_edge_errata = true, }; static int sm8150_pinctrl_probe(struct platform_device *pdev) diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c new file mode 100644 index 000000000000..ddbc6317f2a7 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c @@ -0,0 +1,163 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020 Linaro Ltd. + */ + +#include <linux/gpio/driver.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include "pinctrl-lpass-lpi.h" + +enum lpass_lpi_functions { + LPI_MUX_dmic1_clk, + LPI_MUX_dmic1_data, + LPI_MUX_dmic2_clk, + LPI_MUX_dmic2_data, + LPI_MUX_dmic3_clk, + LPI_MUX_dmic3_data, + LPI_MUX_i2s1_clk, + LPI_MUX_i2s1_data, + LPI_MUX_i2s1_ws, + LPI_MUX_i2s2_clk, + LPI_MUX_i2s2_data, + LPI_MUX_i2s2_ws, + LPI_MUX_qua_mi2s_data, + LPI_MUX_qua_mi2s_sclk, + LPI_MUX_qua_mi2s_ws, + LPI_MUX_swr_rx_clk, + LPI_MUX_swr_rx_data, + LPI_MUX_swr_tx_clk, + LPI_MUX_swr_tx_data, + LPI_MUX_wsa_swr_clk, + LPI_MUX_wsa_swr_data, + LPI_MUX_gpio, + LPI_MUX__, +}; + +static int gpio0_pins[] = { 0 }; +static int gpio1_pins[] = { 1 }; +static int gpio2_pins[] = { 2 }; +static int gpio3_pins[] = { 3 }; +static int gpio4_pins[] = { 4 }; +static int gpio5_pins[] = { 5 }; +static int gpio6_pins[] = { 6 }; +static int gpio7_pins[] = { 7 }; +static int gpio8_pins[] = { 8 }; +static int gpio9_pins[] = { 9 }; +static int gpio10_pins[] = { 10 }; +static int gpio11_pins[] = { 11 }; +static int gpio12_pins[] = { 12 }; +static int gpio13_pins[] = { 13 }; + +static const struct pinctrl_pin_desc sm8250_lpi_pins[] = { + PINCTRL_PIN(0, "gpio0"), + PINCTRL_PIN(1, "gpio1"), + PINCTRL_PIN(2, "gpio2"), + PINCTRL_PIN(3, "gpio3"), + PINCTRL_PIN(4, "gpio4"), + PINCTRL_PIN(5, "gpio5"), + PINCTRL_PIN(6, "gpio6"), + PINCTRL_PIN(7, "gpio7"), + PINCTRL_PIN(8, "gpio8"), + PINCTRL_PIN(9, "gpio9"), + PINCTRL_PIN(10, "gpio10"), + PINCTRL_PIN(11, "gpio11"), + PINCTRL_PIN(12, "gpio12"), + PINCTRL_PIN(13, "gpio13"), +}; + +static const char * const swr_tx_clk_groups[] = { "gpio0" }; +static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" }; +static const char * const swr_rx_clk_groups[] = { "gpio3" }; +static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" }; +static const char * const dmic1_clk_groups[] = { "gpio6" }; +static const char * const dmic1_data_groups[] = { "gpio7" }; +static const char * const dmic2_clk_groups[] = { "gpio8" }; +static const char * const dmic2_data_groups[] = { "gpio9" }; +static const char * const i2s2_clk_groups[] = { "gpio10" }; +static const char * const i2s2_ws_groups[] = { "gpio11" }; +static const char * const dmic3_clk_groups[] = { "gpio12" }; +static const char * const dmic3_data_groups[] = { "gpio13" }; +static const char * const qua_mi2s_sclk_groups[] = { "gpio0" }; +static const char * const qua_mi2s_ws_groups[] = { "gpio1" }; +static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" }; +static const char * const i2s1_clk_groups[] = { "gpio6" }; +static const char * const i2s1_ws_groups[] = { "gpio7" }; +static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" }; +static const char * const wsa_swr_clk_groups[] = { "gpio10" }; +static const char * const wsa_swr_data_groups[] = { "gpio11" }; +static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" }; + +static const struct lpi_pingroup sm8250_groups[] = { + LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _), + LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _), + LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _), + LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _), + LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _), + LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _), + LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _, _), + LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _), + LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _), + LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, _, _), + LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _), + LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _), + LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s2_data, _, _), + LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s2_data, _, _), +}; + +static const struct lpi_function sm8250_functions[] = { + LPI_FUNCTION(dmic1_clk), + LPI_FUNCTION(dmic1_data), + LPI_FUNCTION(dmic2_clk), + LPI_FUNCTION(dmic2_data), + LPI_FUNCTION(dmic3_clk), + LPI_FUNCTION(dmic3_data), + LPI_FUNCTION(i2s1_clk), + LPI_FUNCTION(i2s1_data), + LPI_FUNCTION(i2s1_ws), + LPI_FUNCTION(i2s2_clk), + LPI_FUNCTION(i2s2_data), + LPI_FUNCTION(i2s2_ws), + LPI_FUNCTION(qua_mi2s_data), + LPI_FUNCTION(qua_mi2s_sclk), + LPI_FUNCTION(qua_mi2s_ws), + LPI_FUNCTION(swr_rx_clk), + LPI_FUNCTION(swr_rx_data), + LPI_FUNCTION(swr_tx_clk), + LPI_FUNCTION(swr_tx_data), + LPI_FUNCTION(wsa_swr_clk), + LPI_FUNCTION(wsa_swr_data), +}; + +static const struct lpi_pinctrl_variant_data sm8250_lpi_data = { + .pins = sm8250_lpi_pins, + .npins = ARRAY_SIZE(sm8250_lpi_pins), + .groups = sm8250_groups, + .ngroups = ARRAY_SIZE(sm8250_groups), + .functions = sm8250_functions, + .nfunctions = ARRAY_SIZE(sm8250_functions), +}; + +static const struct of_device_id lpi_pinctrl_of_match[] = { + { + .compatible = "qcom,sm8250-lpass-lpi-pinctrl", + .data = &sm8250_lpi_data, + }, + { } +}; +MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match); + +static struct platform_driver lpi_pinctrl_driver = { + .driver = { + .name = "qcom-sm8250-lpass-lpi-pinctrl", + .of_match_table = lpi_pinctrl_of_match, + }, + .probe = lpi_pinctrl_probe, + .remove = lpi_pinctrl_remove, +}; + +module_platform_driver(lpi_pinctrl_driver); +MODULE_DESCRIPTION("QTI SM8250 LPI GPIO pin control driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index 4fbf8d3938ef..a0c45b305981 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -1183,6 +1183,7 @@ static const struct of_device_id pmic_gpio_of_match[] = { { .compatible = "qcom,pms405-gpio", .data = (void *) 12 }, /* pmx55 has 11 GPIOs with holes on 3, 7, 10, 11 */ { .compatible = "qcom,pmx55-gpio", .data = (void *) 11 }, + { .compatible = "qcom,pmx65-gpio", .data = (void *) 16 }, { }, }; diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h index 98c93510640e..c2041bd01f90 100644 --- a/include/linux/gpio/driver.h +++ b/include/linux/gpio/driver.h @@ -492,6 +492,18 @@ struct gpio_chip { */ int (*of_xlate)(struct gpio_chip *gc, const struct of_phandle_args *gpiospec, u32 *flags); + + /** + * @of_gpio_ranges_fallback: + * + * Optional hook for the case that no gpio-ranges property is defined + * within the device tree node "np" (usually DT before introduction + * of gpio-ranges). So this callback is helpful to provide the + * necessary backward compatibility for the pin ranges. + */ + int (*of_gpio_ranges_fallback)(struct gpio_chip *gc, + struct device_node *np); + #endif /* CONFIG_OF_GPIO */ }; |