0 files changed, 0 insertions, 0 deletions
diff --git a/.gitignore b/.gitignore
index 92bd0e45dfa1..7e9932e55475 100644
--- a/.gitignore
+++ b/.gitignore
@@ -29,6 +29,7 @@ modules.builtin
 *.bz2
 *.lzma
 *.xz
+*.lz4
 *.lzo
 *.patch
 *.gcno
@@ -60,7 +61,6 @@ modules.builtin
 # Generated include files
 #
 include/config
-include/linux/version.h
 include/generated
 arch/*/include/generated
 
diff --git a/CREDITS b/CREDITS
index d8fe12a9421f..0640e1650483 100644
--- a/CREDITS
+++ b/CREDITS
@@ -637,14 +637,13 @@ S: 14509 NE 39th Street #1096
 S: Bellevue, Washington 98007
 S: USA
 
-N: Christopher L. Cheney
-E: ccheney@debian.org
-E: ccheney@cheney.cx
-W: http://www.cheney.cx
+N: Chris Cheney
+E: chris.cheney@gmail.com
+E: ccheney@redhat.com
 P: 1024D/8E384AF2 2D31 1927 87D7 1F24 9FF9  1BC5 D106 5AB3 8E38 4AF2
 D: Vista Imaging usb webcam driver
-S: 314 Prince of Wales
-S: Conroe, TX 77304
+S: 2308 Therrell Way
+S: McKinney, TX 75070
 S: USA
 
 N: Stuart Cheshire
@@ -761,6 +760,10 @@ S: Northampton
 S: NN1 3QT
 S: United Kingdom
 
+N: Massimo Dal Zotto
+E: dz@debian.org
+D: i8k Dell laptop SMM driver
+
 N: Uwe Dannowski
 E: Uwe.Dannowski@ira.uka.de
 W: http://i30www.ira.uka.de/~dannowsk/
@@ -953,11 +956,11 @@ S: Blacksburg, Virginia 24061
 S: USA
 
 N: Randy Dunlap
-E: rdunlap@xenotime.net
-W: http://www.xenotime.net/linux/linux.html
-W: http://www.linux-usb.org
+E: rdunlap@infradead.org
+W: http://www.infradead.org/~rdunlap/
 D: Linux-USB subsystem, USB core/UHCI/printer/storage drivers
 D: x86 SMP, ACPI, bootflag hacking
+D: documentation, builds
 S: (ask for current address)
 S: USA
 
@@ -1116,6 +1119,7 @@ D: author of userfs filesystem
 D: Improved mmap and munmap handling
 D: General mm minor tidyups
 D: autofs v4 maintainer
+D: Xen subsystem
 S: 987 Alabama St
 S: San Francisco
 S: CA, 94110
@@ -1510,6 +1514,14 @@ D: Natsemi ethernet
 D: Cobalt Networks (x86) support
 D: This-and-That
 
+N: Mark M. Hoffman
+E: mhoffman@lightlink.com
+D: asb100, lm93 and smsc47b397 hardware monitoring drivers
+D: hwmon subsystem core
+D: hwmon subsystem maintainer
+D: i2c-sis96x and i2c-stub SMBus drivers
+S: USA
+
 N: Dirk Hohndel
 E: hohndel@suse.de
 D: The XFree86[tm] Project
@@ -1572,12 +1584,12 @@ S: Wantage, New Jersey 07461
 S: USA
 
 N: Harald Hoyer
-E: harald.hoyer@parzelle.de
-W: http://parzelle.de/
+E: harald@redhat.com
+W: http://www.harald-hoyer.de
 D: ip_masq_quake
 D: md boot support
-S: Hohe Strasse 30
-S: D-70176 Stuttgart
+S: Am Strand 5
+S: D-19063 Schwerin
 S: Germany
 
 N: Jan Hubicka
@@ -1823,6 +1835,11 @@ S: Kattreinstr 38
 S: D-64295
 S: Germany
 
+N: Avi Kivity
+E: avi.kivity@gmail.com
+D: Kernel-based Virtual Machine (KVM)
+S: Ra'annana, Israel
+
 N: Andi Kleen
 E: andi@firstfloor.org
 U: http://www.halobates.de
@@ -2791,8 +2808,7 @@ S: Ottawa, Ontario
 S: Canada K2P 0X8
 
 N: Mikael Pettersson
-E: mikpe@it.uu.se
-W: http://user.it.uu.se/~mikpe/linux/
+E: mikpelinux@gmail.com
 D: Miscellaneous fixes
 
 N: Reed H. Petty
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index ceb1ff735469..38f8444bdd0e 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -2,7 +2,7 @@
 This is a brief list of all the files in ./linux/Documentation and what
 they contain. If you add a documentation file, please list it here in
 alphabetical order as well, or risk being hunted down like a rabid dog.
-Please try and keep the descriptions small enough to fit on one line.
+Please keep the descriptions small enough to fit on one line.
 							 Thanks -- Paul G.
 
 Following translations are available on the WWW:
@@ -20,24 +20,33 @@ BUG-HUNTING
 Changes
 	- list of changes that break older software packages.
 CodingStyle
-	- how the boss likes the C code in the kernel to look.
-development-process/
-	- An extended tutorial on how to work with the kernel development
-	  process.
+	- how the maintainers expect the C code in the kernel to look.
 DMA-API.txt
 	- DMA API, pci_ API & extensions for non-consistent memory machines.
+DMA-API-HOWTO.txt
+	- Dynamic DMA mapping Guide
 DMA-ISA-LPC.txt
 	- How to do DMA with ISA (and LPC) devices.
+DMA-attributes.txt
+	- listing of the various possible attributes a DMA region can have
 DocBook/
 	- directory with DocBook templates etc. for kernel documentation.
+EDID/
+	- directory with info on customizing EDID for broken gfx/displays.
 HOWTO
 	- the process and procedures of how to do Linux kernel development.
 IPMI.txt
 	- info on Linux Intelligent Platform Management Interface (IPMI) Driver.
 IRQ-affinity.txt
 	- how to select which CPU(s) handle which interrupt events on SMP.
+IRQ-domain.txt
+	- info on interrupt numbering and setting up IRQ domains.
 IRQ.txt
 	- description of what an IRQ is.
+Intel-IOMMU.txt
+	- basic info on the Intel IOMMU virtualization support.
+Makefile
+	- some files in Documentation dir are actually sample code to build
 ManagementStyle
 	- how to (attempt to) manage kernel hackers.
 RCU/
@@ -66,10 +75,16 @@ applying-patches.txt
 	- description of various trees and how to apply their patches.
 arm/
 	- directory with info about Linux on the ARM architecture.
+arm64/
+	- directory with info about Linux on the 64 bit ARM architecture.
 atomic_ops.txt
 	- semantics and behavior of atomic and bitmask operations.
 auxdisplay/
 	- misc. LCD driver documentation (cfag12864b, ks0108).
+backlight/
+	- directory with info on controlling backlights in flat panel displays
+bad_memory.txt
+	- how to use kernel parameters to exclude bad RAM regions.
 basic_profiling.txt
 	- basic instructions for those who wants to profile Linux kernel.
 binfmt_misc.txt
@@ -80,8 +95,14 @@ block/
 	- info on the Block I/O (BIO) layer.
 blockdev/
 	- info on block devices & drivers
+braille-console.txt
+	- info on how to use serial devices for Braille support.
+bt8xxgpio.txt
+	- info on how to modify a bt8xx video card for GPIO usage.
 btmrvl.txt
 	- info on Marvell Bluetooth driver usage.
+bus-devices/
+	- directory with info on TI GPMC (General Purpose Memory Controller)
 bus-virt-phys-mapping.txt
 	- how to access I/O mapped memory from within device drivers.
 cachetlb.txt
@@ -90,6 +111,12 @@ cdrom/
 	- directory with information on the CD-ROM drivers that Linux has.
 cgroups/
 	- cgroups features, including cpusets and memory controller.
+circular-buffers.txt
+	- how to make use of the existing circular buffer infrastructure
+clk.txt
+	- info on the common clock framework
+coccinelle.txt
+	- info on how to get and use the Coccinelle code checking tool.
 connector/
 	- docs on the netlink based userspace<->kernel space communication mod.
 console/
@@ -114,40 +141,68 @@ dcdbas.txt
 	- information on the Dell Systems Management Base Driver.
 debugging-modules.txt
 	- some notes on debugging modules after Linux 2.6.3.
+debugging-via-ohci1394.txt
+	- how to use firewire like a hardware debugger memory reader.
 dell_rbu.txt
 	- document demonstrating the use of the Dell Remote BIOS Update driver.
+development-process/
+	- how to work with the mainline kernel development process.
 device-mapper/
 	- directory with info on Device Mapper.
 devices.txt
 	- plain ASCII listing of all the nodes in /dev/ with major minor #'s.
+devicetree/
+	- directory with info on device tree files used by OF/PowerPC/ARM
+digsig.txt
+	-info on the Digital Signature Verification API
+dma-buf-sharing.txt
+	- the DMA Buffer Sharing API Guide
+dmaengine.txt
+	-the DMA Engine API Guide
 dontdiff
 	- file containing a list of files that should never be diff'ed.
 driver-model/
 	- directory with info about Linux driver model.
 dvb/
 	- info on Linux Digital Video Broadcast (DVB) subsystem.
+dynamic-debug-howto.txt
+	- how to use the dynamic debug (dyndbg) feature.
 early-userspace/
 	- info about initramfs, klibc, and userspace early during boot.
 edac.txt
 	- information on EDAC - Error Detection And Correction
 eisa.txt
 	- info on EISA bus support.
+email-clients.txt
+	- info on how to use e-mail to send un-mangled (git) patches.
+extcon/
+	- directory with porting guide for Android kernel switch driver.
 fault-injection/
 	- dir with docs about the fault injection capabilities infrastructure.
 fb/
 	- directory with info on the frame buffer graphics abstraction layer.
-feature-removal-schedule.txt
-	- list of files and features that are going to be removed.
 filesystems/
 	- info on the vfs and the various filesystems that Linux supports.
 firmware_class/
 	- request_firmware() hotplug interface info.
+flexible-arrays.txt
+	- how to make use of flexible sized arrays in linux
+fmc/
+	- information about the FMC bus abstraction
 frv/
 	- Fujitsu FR-V Linux documentation.
+futex-requeue-pi.txt
+	- info on requeueing of tasks from a non-PI futex to a PI futex
+gcov.txt
+	- use of GCC's coverage testing tool "gcov" with the Linux kernel
 gpio.txt
 	- overview of GPIO (General Purpose Input/Output) access conventions.
+hid/
+	- directory with information on human interface devices
 highuid.txt
 	- notes on the change from 16 bit to 32 bit user/group IDs.
+hwspinlock.txt
+	- hardware spinlock provides hardware assistance for synchronization
 timers/
 	- info on the timer related topics
 hw_random.txt
@@ -164,10 +219,14 @@ ia64/
 	- directory with info about Linux on Intel 64 bit architecture.
 infiniband/
 	- directory with documents concerning Linux InfiniBand support.
+init.txt
+	- what to do when the kernel can't find the 1st process to run.
 initrd.txt
 	- how to use the RAM disk as an initial/temporary root filesystem.
 input/
 	- info on Linux input device support.
+intel_txt.txt
+	- info on intel Trusted Execution Technology (intel TXT).
 io-mapping.txt
 	- description of io_mapping functions in linux/io-mapping.h
 io_ordering.txt
@@ -184,6 +243,8 @@ isdn/
 	- directory with info on the Linux ISDN support, and supported cards.
 java.txt
 	- info on the in-kernel binary support for Java(tm).
+ja_JP/
+	- directory with Japanese translations of various documents
 kbuild/
 	- directory with info about the kernel build process.
 kdump/
@@ -194,6 +255,12 @@ kernel-docs.txt
 	- listing of various WWW + books that document kernel internals.
 kernel-parameters.txt
 	- summary listing of command line / boot prompt args for the kernel.
+kmemcheck.txt
+	- info on dynamic checker that detects uses of uninitialized memory.
+kmemleak.txt
+	- info on how to make use of the kernel memory leak detection system
+ko_KR/
+	- directory with Korean translations of various documents
 kobject.txt
 	- info of the kobject infrastructure of the Linux kernel.
 kprobes.txt
@@ -210,6 +277,8 @@ local_ops.txt
 	- semantics and behavior of local atomic operations.
 lockdep-design.txt
 	- documentation on the runtime locking correctness validator.
+lockstat.txt
+	- info on collecting statistics on locks (and contention).
 lockup-watchdogs.txt
 	- info on soft and hard lockup detectors (aka nmi_watchdog).
 logo.gif
@@ -222,16 +291,28 @@ magic-number.txt
 	- list of magic numbers used to mark/protect kernel data structures.
 md.txt
 	- info on boot arguments for the multiple devices driver.
+media-framework.txt
+	- info on media framework, its data structures, functions and usage.
 memory-barriers.txt
 	- info on Linux kernel memory barriers.
+memory-devices/
+	- directory with info on parts like the Texas Instruments EMIF driver
 memory-hotplug.txt
 	- Hotpluggable memory support, how to use and current status.
 memory.txt
 	- info on typical Linux memory problems.
+metag/
+	- directory with info about Linux on Meta architecture.
 mips/
 	- directory with info about Linux on MIPS architecture.
+misc-devices/
+	- directory with info about devices using the misc dev subsystem
 mmc/
 	- directory with info about the MMC subsystem
+mn10300/
+	- directory with info about the mn10300 architecture port
+mtd/
+	- directory with info about memory technology devices (flash)
 mono.txt
 	- how to execute Mono-based .NET binaries with the help of BINFMT_MISC.
 mutex-design.txt
@@ -242,6 +323,8 @@ netlabel/
 	- directory with information on the NetLabel subsystem.
 networking/
 	- directory with info on various aspects of networking with Linux.
+nfc/
+	- directory relating info about Near Field Communications support.
 nommu-mmap.txt
 	- documentation about no-mmu memory mapping support.
 numastat.txt
@@ -258,26 +341,46 @@ parport-lowlevel.txt
 	- description and usage of the low level parallel port functions.
 pcmcia/
 	- info on the Linux PCMCIA driver.
+percpu-rw-semaphore.txt
+	- RCU based read-write semaphore optimized for locking for reading
 pi-futex.txt
-	- documentation on lightweight PI-futexes.
+	- documentation on lightweight priority inheritance futexes.
+pinctrl.txt
+	- info on pinctrl subsystem and the PINMUX/PINCONF and drivers
 pnp.txt
 	- Linux Plug and Play documentation.
 power/
 	- directory with info on Linux PCI power management.
 powerpc/
 	- directory with info on using Linux with the PowerPC.
+prctl/
+	- directory with info on the priveledge control subsystem
 preempt-locking.txt
 	- info on locking under a preemptive kernel.
 printk-formats.txt
 	- how to get printk format specifiers right
+pps/
+	- directory with information on the pulse-per-second support
+ptp/
+	- directory with info on support for IEEE 1588 PTP clocks in Linux.
+pwm.txt
+	- info on the pulse width modulation driver subsystem
 ramoops.txt
 	- documentation of the ramoops oops/panic logging module.
+rapidio/
+	- directory with info on RapidIO packet-based fabric interconnect
 rbtree.txt
 	- info on what red-black trees are and what they are for.
+remoteproc.txt
+	- info on how to handle remote processor (e.g. AMP) offloads/usage.
+rfkill.txt
+	- info on the radio frequency kill switch subsystem/support.
 robust-futex-ABI.txt
 	- documentation of the robust futex ABI.
 robust-futexes.txt
 	- a description of what robust futexes are.
+rpmsg.txt
+	- info on the Remote Processor Messaging (rpmsg) Framework
 rt-mutex-design.txt
 	- description of the RealTime mutex implementation design.
 rt-mutex.txt
@@ -302,10 +405,10 @@ sgi-visws.txt
 	- short blurb on the SGI Visual Workstations.
 sh/
 	- directory with info on porting Linux to a new architecture.
+smsc_ece1099.txt
+	-info on the smsc Keyboard Scan Expansion/GPIO Expansion device.
 sound/
 	- directory with info on sound card support.
-sparc/
-	- directory with info on using Linux on Sparc architecture.
 sparse.txt
 	- info on how to obtain and use the sparse tool for typechecking.
 spi/
@@ -316,6 +419,8 @@ stable_api_nonsense.txt
 	- info on why the kernel does not have a stable in-kernel api or abi.
 stable_kernel_rules.txt
 	- rules and procedures for the -stable kernel releases.
+static-keys.txt
+	- info on how static keys allow debug code in hotpaths via patching
 svga.txt
 	- short guide on selecting video modes at boot via VGA BIOS.
 sysfs-rules.txt
@@ -324,27 +429,53 @@ sysctl/
 	- directory with info on the /proc/sys/* files.
 sysrq.txt
 	- info on the magic SysRq key.
-telephony/
-	- directory with info on telephony (e.g. voice over IP) support.
+target/
+	- directory with info on generating TCM v4 fabric .ko modules
+thermal/
+	- directory with information on managing thermal issues (CPU/temp)
+trace/
+	- directory with info on tracing technologies within linux
+unaligned-memory-access.txt
+	- info on how to avoid arch breaking unaligned memory access in code.
 unicode.txt
 	- info on the Unicode character/font mapping used in Linux.
 unshare.txt
 	- description of the Linux unshare system call.
 usb/
 	- directory with info regarding the Universal Serial Bus.
+vDSO/
+	- directory with info regarding virtual dynamic shared objects
+vfio.txt
+	- info on Virtual Function I/O used in guest/hypervisor instances.
+vgaarbiter.txt
+	- info on enable/disable the legacy decoding on different VGA devices
 video-output.txt
 	- sysfs class driver interface to enable/disable a video output device.
 video4linux/
 	- directory with info regarding video/TV/radio cards and linux.
+virtual/
+	- directory with information on the various linux virtualizations.
 vm/
 	- directory with info on the Linux vm code.
+vme_api.txt
+	- file relating info on the VME bus API in linux
 volatile-considered-harmful.txt
 	- Why the "volatile" type class should not be used
 w1/
 	- directory with documents regarding the 1-wire (w1) subsystem.
 watchdog/
 	- how to auto-reboot Linux if it has "fallen and can't get up". ;-)
+wimax/
+	- directory with info about Intel Wireless Wimax Connections
+workqueue.txt
+	- information on the Concurrency Managed Workqueue implementation
 x86/x86_64/
 	- directory with info on Linux support for AMD x86-64 (Hammer) machines.
+xtensa/
+	- directory with documents relating to arch/xtensa port/implementation
+xz.txt
+	- how to make use of the XZ data compression within linux kernel
+zh_CN/
+	- directory with Chinese translations of various documents
 zorro.txt
 	- info on writing drivers for Zorro bus devices found on Amigas.
diff --git a/Documentation/ABI/README b/Documentation/ABI/README
index 9feaf16f1617..10069828568b 100644
--- a/Documentation/ABI/README
+++ b/Documentation/ABI/README
@@ -36,9 +36,6 @@ The different levels of stability are:
 	the kernel, but are marked to be removed at some later point in
 	time.  The description of the interface will document the reason
 	why it is obsolete and when it can be expected to be removed.
-	The file Documentation/feature-removal-schedule.txt may describe
-	some of these interfaces, giving a schedule for when they will
-	be removed.
 
   removed/
 	This directory contains a list of the old interfaces that have
diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus
index c2a270b45b03..833fd59926a7 100644
--- a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus
+++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus
@@ -8,3 +8,41 @@ Description:	The integer value of this attribute ranges from 0-4.
 		When written, this file sets the number of the startup profile
 		and the mouse activates this profile immediately.
 		Please use actual_profile, it does the same thing.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/firmware_version
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the raw integer version number of the
+		firmware reported by the mouse. Using the integer value eases
+		further usage in other programs. To receive the real version
+		number the decimal point has to be shifted 2 positions to the
+		left. E.g. a returned value of 121 means 1.21
+		This file is readonly.
+		Please read binary attribute info which contains firmware version.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When read, these files return the respective profile buttons.
+		The returned data is 77 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_buttons instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When read, these files return the respective profile settings.
+		The returned data is 43 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_settings instead.
+Users:		http://roccat.sourceforge.net
+\ No newline at end of file
diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus
new file mode 100644
index 000000000000..4a98e02b6c6a
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus
@@ -0,0 +1,66 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_cpi
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1-4.
+		When read, this attribute returns the number of the active
+		cpi level.
+		This file is readonly.
+		Has never been used. If bookkeeping is done, it's done in userland tools.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_x
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1-10.
+		When read, this attribute returns the number of the actual
+		sensitivity in x direction.
+		This file is readonly.
+		Has never been used. If bookkeeping is done, it's done in userland tools.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_y
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1-10.
+		When read, this attribute returns the number of the actual
+		sensitivity in y direction.
+		This file is readonly.
+		Has never been used. If bookkeeping is done, it's done in userland tools.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/firmware_version
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the raw integer version number of the
+		firmware reported by the mouse. Using the integer value eases
+		further usage in other programs. To receive the real version
+		number the decimal point has to be shifted 2 positions to the
+		left. E.g. a returned value of 121 means 1.21
+		This file is readonly.
+		Obsoleted by binary sysfs attribute "info".
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_buttons
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When read, these files return the respective profile buttons.
+		The returned data is 23 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_buttons instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_settings
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When read, these files return the respective profile settings.
+		The returned data is 16 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_settings instead.
+Users:		http://roccat.sourceforge.net
diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra
new file mode 100644
index 000000000000..87ac87e9556d
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra
@@ -0,0 +1,73 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_cpi
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	It is possible to switch the cpi setting of the mouse with the
+		press of a button.
+		When read, this file returns the raw number of the actual cpi
+		setting reported by the mouse. This number has to be further
+		processed to receive the real dpi value.
+
+		VALUE DPI
+		1     400
+		2     800
+		4     1600
+
+		This file is readonly.
+		Has never been used. If bookkeeping is done, it's done in userland tools.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_profile
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the number of the actual profile in
+		range 0-4.
+		This file is readonly.
+		Please use binary attribute "settings" which provides this information.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/firmware_version
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the raw integer version number of the
+		firmware reported by the mouse. Using the integer value eases
+		further usage in other programs. To receive the real version
+		number the decimal point has to be shifted 2 positions to the
+		left. E.g. a returned value of 138 means 1.38
+		This file is readonly.
+		Please use binary attribute "info" which provides this information.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When read, these files return the respective profile buttons.
+		The returned data is 19 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_buttons instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When read, these files return the respective profile settings.
+		The returned data is 13 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_settings instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/startup_profile
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+                When read, this attribute returns the number of the profile
+                that's active when the mouse is powered on.
+		This file is readonly.
+		Please use binary attribute "settings" which provides this information.
+Users:		http://roccat.sourceforge.net
diff --git a/Documentation/ABI/stable/sysfs-bus-usb b/Documentation/ABI/stable/sysfs-bus-usb
new file mode 100644
index 000000000000..a6b685724740
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-usb
@@ -0,0 +1,142 @@
+What:		/sys/bus/usb/devices/.../power/persist
+Date:		May 2007
+KernelVersion:	2.6.23
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		If CONFIG_USB_PERSIST is set, then each USB device directory
+		will contain a file named power/persist.  The file holds a
+		boolean value (0 or 1) indicating whether or not the
+		"USB-Persist" facility is enabled for the device.  Since the
+		facility is inherently dangerous, it is disabled by default
+		for all devices except hubs.  For more information, see
+		Documentation/usb/persist.txt.
+
+What:		/sys/bus/usb/devices/.../power/autosuspend
+Date:		March 2007
+KernelVersion:	2.6.21
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		Each USB device directory will contain a file named
+		power/autosuspend.  This file holds the time (in seconds)
+		the device must be idle before it will be autosuspended.
+		0 means the device will be autosuspended as soon as
+		possible.  Negative values will prevent the device from
+		being autosuspended at all, and writing a negative value
+		will resume the device if it is already suspended.
+
+		The autosuspend delay for newly-created devices is set to
+		the value of the usbcore.autosuspend module parameter.
+
+What:		/sys/bus/usb/device/.../power/connected_duration
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+		If CONFIG_PM_RUNTIME is enabled then this file
+		is present.  When read, it returns the total time (in msec)
+		that the USB device has been connected to the machine.  This
+		file is read-only.
+Users:
+		PowerTOP <powertop@lists.01.org>
+		https://01.org/powertop/
+
+What:		/sys/bus/usb/device/.../power/active_duration
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+		If CONFIG_PM_RUNTIME is enabled then this file
+		is present.  When read, it returns the total time (in msec)
+		that the USB device has been active, i.e. not in a suspended
+		state.  This file is read-only.
+
+		Tools can use this file and the connected_duration file to
+		compute the percentage of time that a device has been active.
+		For example,
+		echo $((100 * `cat active_duration` / `cat connected_duration`))
+		will give an integer percentage.  Note that this does not
+		account for counter wrap.
+Users:
+		PowerTOP <powertop@lists.01.org>
+		https://01.org/powertop/
+
+What:		/sys/bus/usb/devices/<busnum>-<port[.port]>...:<config num>-<interface num>/supports_autosuspend
+Date:		January 2008
+KernelVersion:	2.6.27
+Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+		When read, this file returns 1 if the interface driver
+		for this interface supports autosuspend.  It also
+		returns 1 if no driver has claimed this interface, as an
+		unclaimed interface will not stop the device from being
+		autosuspended if all other interface drivers are idle.
+		The file returns 0 if autosuspend support has not been
+		added to the driver.
+Users:
+		USB PM tool
+		git://git.moblin.org/users/sarah/usb-pm-tool/
+
+What:		/sys/bus/usb/device/.../avoid_reset_quirk
+Date:		December 2009
+Contact:	Oliver Neukum <oliver@neukum.org>
+Description:
+		Writing 1 to this file tells the kernel that this
+		device will morph into another mode when it is reset.
+		Drivers will not use reset for error handling for
+		such devices.
+Users:
+		usb_modeswitch
+
+What:		/sys/bus/usb/devices/.../devnum
+KernelVersion:	since at least 2.6.18
+Description:
+		Device address on the USB bus.
+Users:
+		libusb
+
+What:		/sys/bus/usb/devices/.../bConfigurationValue
+KernelVersion:	since at least 2.6.18
+Description:
+		bConfigurationValue of the *active* configuration for the
+		device. Writing 0 or -1 to bConfigurationValue will reset the
+		active configuration (unconfigure the device). Writing
+		another value will change the active configuration.
+
+		Note that some devices, in violation of the USB spec, have a
+		configuration with a value equal to 0. Writing 0 to
+		bConfigurationValue for these devices will install that
+		configuration, rather then unconfigure the device.
+
+		Writing -1 will always unconfigure the device.
+Users:
+		libusb
+
+What:		/sys/bus/usb/devices/.../busnum
+KernelVersion:	2.6.22
+Description:
+		Bus-number of the USB-bus the device is connected to.
+Users:
+		libusb
+
+What:		/sys/bus/usb/devices/.../descriptors
+KernelVersion:	2.6.26
+Description:
+		Binary file containing cached descriptors of the device. The
+		binary data consists of the device descriptor followed by the
+		descriptors for each configuration of the device.
+		Note that the wTotalLength of the config descriptors can not
+		be trusted, as the device may have a smaller config descriptor
+		than it advertises. The bLength field of each (sub) descriptor
+		can be trusted, and can be used to seek forward one (sub)
+		descriptor at a time until the next config descriptor is found.
+		All descriptors read from this file are in bus-endian format
+Users:
+		libusb
+
+What:		/sys/bus/usb/devices/.../speed
+KernelVersion:	since at least 2.6.18
+Description:
+		Speed the device is connected with to the usb-host in
+		Mbit / second. IE one of 1.5 / 12 / 480 / 5000.
+Users:
+		libusb
diff --git a/Documentation/ABI/stable/sysfs-class-tpm b/Documentation/ABI/stable/sysfs-class-tpm
new file mode 100644
index 000000000000..a60b45e2493b
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-class-tpm
@@ -0,0 +1,185 @@
+What:		/sys/class/misc/tpmX/device/
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The device/ directory under a specific TPM instance exposes
+		the properties of that TPM chip
+
+
+What:		/sys/class/misc/tpmX/device/active
+Date:		April 2006
+KernelVersion:	2.6.17
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "active" property prints a '1' if the TPM chip is accepting
+		commands. An inactive TPM chip still contains all the state of
+		an active chip (Storage Root Key, NVRAM, etc), and can be
+		visible to the OS, but will only accept a restricted set of
+		commands. See the TPM Main Specification part 2, Structures,
+		section 17 for more information on which commands are
+		available.
+
+What:		/sys/class/misc/tpmX/device/cancel
+Date:		June 2005
+KernelVersion:	2.6.13
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "cancel" property allows you to cancel the currently
+		pending TPM command. Writing any value to cancel will call the
+		TPM vendor specific cancel operation.
+
+What:		/sys/class/misc/tpmX/device/caps
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "caps" property contains TPM manufacturer and version info.
+
+		Example output:
+
+		Manufacturer: 0x53544d20
+		TCG version: 1.2
+		Firmware version: 8.16
+
+		Manufacturer is a hex dump of the 4 byte manufacturer info
+		space in a TPM. TCG version shows the TCG TPM spec level that
+		the chip supports. Firmware version is that of the chip and
+		is manufacturer specific.
+
+What:		/sys/class/misc/tpmX/device/durations
+Date:		March 2011
+KernelVersion:	3.1
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "durations" property shows the 3 vendor-specific values
+		used to wait for a short, medium and long TPM command. All
+		TPM commands are categorized as short, medium or long in
+		execution time, so that the driver doesn't have to wait
+		any longer than necessary before starting to poll for a
+		result.
+
+		Example output:
+
+		3015000 4508000 180995000 [original]
+
+		Here the short, medium and long durations are displayed in
+		usecs. "[original]" indicates that the values are displayed
+		unmodified from when they were queried from the chip.
+		Durations can be modified in the case where a buggy chip
+		reports them in msec instead of usec and they need to be
+		scaled to be displayed in usecs. In this case "[adjusted]"
+		will be displayed in place of "[original]".
+
+What:		/sys/class/misc/tpmX/device/enabled
+Date:		April 2006
+KernelVersion:	2.6.17
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "enabled" property prints a '1' if the TPM chip is enabled,
+		meaning that it should be visible to the OS. This property
+		may be visible but produce a '0' after some operation that
+		disables the TPM.
+
+What:		/sys/class/misc/tpmX/device/owned
+Date:		April 2006
+KernelVersion:	2.6.17
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "owned" property produces a '1' if the TPM_TakeOwnership
+		ordinal has been executed successfully in the chip. A '0'
+		indicates that ownership hasn't been taken.
+
+What:		/sys/class/misc/tpmX/device/pcrs
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "pcrs" property will dump the current value of all Platform
+		Configuration Registers in the TPM. Note that since these
+		values may be constantly changing, the output is only valid
+		for a snapshot in time.
+
+		Example output:
+
+		PCR-00: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		PCR-01: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		PCR-02: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		PCR-03: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		PCR-04: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		...
+
+		The number of PCRs and hex bytes needed to represent a PCR
+		value will vary depending on TPM chip version. For TPM 1.1 and
+		1.2 chips, PCRs represent SHA-1 hashes, which are 20 bytes
+		long. Use the "caps" property to determine TPM version.
+
+What:		/sys/class/misc/tpmX/device/pubek
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "pubek" property will return the TPM's public endorsement
+		key if possible. If the TPM has had ownership established and
+		is version 1.2, the pubek will not be available without the
+		owner's authorization. Since the TPM driver doesn't store any
+		secrets, it can't authorize its own request for the pubek,
+		making it unaccessible. The public endorsement key is gener-
+		ated at TPM menufacture time and exists for the life of the
+		chip.
+
+		Example output:
+
+		Algorithm: 00 00 00 01
+		Encscheme: 00 03
+		Sigscheme: 00 01
+		Parameters: 00 00 08 00 00 00 00 02 00 00 00 00
+		Modulus length: 256
+		Modulus:
+		B4 76 41 82 C9 20 2C 10 18 40 BC 8B E5 44 4C 6C
+		3A B2 92 0C A4 9B 2A 83 EB 5C 12 85 04 48 A0 B6
+		1E E4 81 84 CE B2 F2 45 1C F0 85 99 61 02 4D EB
+		86 C4 F7 F3 29 60 52 93 6B B2 E5 AB 8B A9 09 E3
+		D7 0E 7D CA 41 BF 43 07 65 86 3C 8C 13 7A D0 8B
+		82 5E 96 0B F8 1F 5F 34 06 DA A2 52 C1 A9 D5 26
+		0F F4 04 4B D9 3F 2D F2 AC 2F 74 64 1F 8B CD 3E
+		1E 30 38 6C 70 63 69 AB E2 50 DF 49 05 2E E1 8D
+		6F 78 44 DA 57 43 69 EE 76 6C 38 8A E9 8E A3 F0
+		A7 1F 3C A8 D0 12 15 3E CA 0E BD FA 24 CD 33 C6
+		47 AE A4 18 83 8E 22 39 75 93 86 E6 FD 66 48 B6
+		10 AD 94 14 65 F9 6A 17 78 BD 16 53 84 30 BF 70
+		E0 DC 65 FD 3C C6 B0 1E BF B9 C1 B5 6C EF B1 3A
+		F8 28 05 83 62 26 11 DC B4 6B 5A 97 FF 32 26 B6
+		F7 02 71 CF 15 AE 16 DD D1 C1 8E A8 CF 9B 50 7B
+		C3 91 FF 44 1E CF 7C 39 FE 17 77 21 20 BD CE 9B
+
+		Possible values:
+
+		Algorithm:	TPM_ALG_RSA			(1)
+		Encscheme:	TPM_ES_RSAESPKCSv15		(2)
+				TPM_ES_RSAESOAEP_SHA1_MGF1	(3)
+		Sigscheme:	TPM_SS_NONE			(1)
+		Parameters, a byte string of 3 u32 values:
+			Key Length (bits):	00 00 08 00	(2048)
+			Num primes:		00 00 00 02	(2)
+			Exponent Size:		00 00 00 00	(0 means the
+								 default exp)
+		Modulus Length: 256 (bytes)
+		Modulus:	The 256 byte Endorsement Key modulus
+
+What:		/sys/class/misc/tpmX/device/temp_deactivated
+Date:		April 2006
+KernelVersion:	2.6.17
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "temp_deactivated" property returns a '1' if the chip has
+		been temporarily dectivated, usually until the next power
+		cycle. Whether a warm boot (reboot) will clear a TPM chip
+		from a temp_deactivated state is platform specific.
+
+What:		/sys/class/misc/tpmX/device/timeouts
+Date:		March 2011
+KernelVersion:	3.1
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "timeouts" property shows the 4 vendor-specific values
+		for the TPM's interface spec timeouts. The use of these
+		timeouts is defined by the TPM interface spec that the chip
+		conforms to.
+
+		Example output:
+
+		750000 750000 750000 750000 [original]
+
+		The four timeout values are shown in usecs, with a trailing
+		"[original]" or "[adjusted]" depending on whether the values
+		were scaled by the driver to be reported in usec from msecs.
diff --git a/Documentation/ABI/stable/sysfs-devices-node b/Documentation/ABI/stable/sysfs-devices-node
index 49b82cad7003..ce259c13c36a 100644
--- a/Documentation/ABI/stable/sysfs-devices-node
+++ b/Documentation/ABI/stable/sysfs-devices-node
@@ -1,7 +1,101 @@
+What:		/sys/devices/system/node/possible
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that could be possibly become online at some point.
+
+What:		/sys/devices/system/node/online
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that are online.
+
+What:		/sys/devices/system/node/has_normal_memory
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that have regular memory.
+
+What:		/sys/devices/system/node/has_cpu
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that have one or more CPUs.
+
+What:		/sys/devices/system/node/has_high_memory
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that have regular or high memory.
+		Depends on CONFIG_HIGHMEM.
+
 What:		/sys/devices/system/node/nodeX
 Date:		October 2002
 Contact:	Linux Memory Management list <linux-mm@kvack.org>
 Description:
 		When CONFIG_NUMA is enabled, this is a directory containing
 		information on node X such as what CPUs are local to the
-		node.
+		node. Each file is detailed next.
+
+What:		/sys/devices/system/node/nodeX/cpumap
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		The node's cpumap.
+
+What:		/sys/devices/system/node/nodeX/cpulist
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		The CPUs associated to the node.
+
+What:		/sys/devices/system/node/nodeX/meminfo
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Provides information about the node's distribution and memory
+		utilization. Similar to /proc/meminfo, see Documentation/filesystems/proc.txt
+
+What:		/sys/devices/system/node/nodeX/numastat
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		The node's hit/miss statistics, in units of pages.
+		See Documentation/numastat.txt
+
+What:		/sys/devices/system/node/nodeX/distance
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Distance between the node and all the other nodes
+		in the system.
+
+What:		/sys/devices/system/node/nodeX/vmstat
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		The node's zoned virtual memory statistics.
+		This is a superset of numastat.
+
+What:		/sys/devices/system/node/nodeX/compact
+Date:		February 2010
+Contact:	Mel Gorman <mel@csn.ul.ie>
+Description:
+		When this file is written to, all memory within that node
+		will be compacted. When it completes, memory will be freed
+		into blocks which have as many contiguous pages as possible
+
+What:		/sys/devices/system/node/nodeX/scan_unevictable_pages
+Date:		October 2008
+Contact:	Lee Schermerhorn <lee.schermerhorn@hp.com>
+Description:
+		When set, it triggers scanning the node's unevictable lists
+		and move any pages that have become evictable onto the respective
+		zone's inactive list. See mm/vmscan.c
+
+What:		/sys/devices/system/node/nodeX/hugepages/hugepages-<size>/
+Date:		December 2009
+Contact:	Lee Schermerhorn <lee.schermerhorn@hp.com>
+Description:
+		The node's huge page size control/query attributes.
+		See Documentation/vm/hugetlbpage.txt
+\ No newline at end of file
diff --git a/Documentation/ABI/stable/sysfs-driver-ib_srp b/Documentation/ABI/stable/sysfs-driver-ib_srp
new file mode 100644
index 000000000000..5c53d28f775c
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-ib_srp
@@ -0,0 +1,163 @@
+What:		/sys/class/infiniband_srp/srp-<hca>-<port_number>/add_target
+Date:		January 2, 2006
+KernelVersion:	2.6.15
+Contact:	linux-rdma@vger.kernel.org
+Description:	Interface for making ib_srp connect to a new target.
+		One can request ib_srp to connect to a new target by writing
+		a comma-separated list of login parameters to this sysfs
+		attribute. The supported parameters are:
+		* id_ext, a 16-digit hexadecimal number specifying the eight
+		  byte identifier extension in the 16-byte SRP target port
+		  identifier. The target port identifier is sent by ib_srp
+		  to the target in the SRP_LOGIN_REQ request.
+		* ioc_guid, a 16-digit hexadecimal number specifying the eight
+		  byte I/O controller GUID portion of the 16-byte target port
+		  identifier.
+		* dgid, a 32-digit hexadecimal number specifying the
+		  destination GID.
+		* pkey, a four-digit hexadecimal number specifying the
+		  InfiniBand partition key.
+		* service_id, a 16-digit hexadecimal number specifying the
+		  InfiniBand service ID used to establish communication with
+		  the SRP target. How to find out the value of the service ID
+		  is specified in the documentation of the SRP target.
+		* max_sect, a decimal number specifying the maximum number of
+		  512-byte sectors to be transferred via a single SCSI command.
+		* max_cmd_per_lun, a decimal number specifying the maximum
+		  number of outstanding commands for a single LUN.
+		* io_class, a hexadecimal number specifying the SRP I/O class.
+		  Must be either 0xff00 (rev 10) or 0x0100 (rev 16a). The I/O
+		  class defines the format of the SRP initiator and target
+		  port identifiers.
+		* initiator_ext, a 16-digit hexadecimal number specifying the
+		  identifier extension portion of the SRP initiator port
+		  identifier. This data is sent by the initiator to the target
+		  in the SRP_LOGIN_REQ request.
+		* cmd_sg_entries, a number in the range 1..255 that specifies
+		  the maximum number of data buffer descriptors stored in the
+		  SRP_CMD information unit itself. With allow_ext_sg=0 the
+		  parameter cmd_sg_entries defines the maximum S/G list length
+		  for a single SRP_CMD, and commands whose S/G list length
+		  exceeds this limit after S/G list collapsing will fail.
+		* allow_ext_sg, whether ib_srp is allowed to include a partial
+		  memory descriptor list in an SRP_CMD instead of the entire
+		  list. If a partial memory descriptor list has been included
+		  in an SRP_CMD the remaining memory descriptors are
+		  communicated from initiator to target via an additional RDMA
+		  transfer. Setting allow_ext_sg to 1 increases the maximum
+		  amount of data that can be transferred between initiator and
+		  target via a single SCSI command. Since not all SRP target
+		  implementations support partial memory descriptor lists the
+		  default value for this option is 0.
+		* sg_tablesize, a number in the range 1..2048 specifying the
+		  maximum S/G list length the SCSI layer is allowed to pass to
+		  ib_srp. Specifying a value that exceeds cmd_sg_entries is
+		  only safe with partial memory descriptor list support enabled
+		  (allow_ext_sg=1).
+		* comp_vector, a number in the range 0..n-1 specifying the
+		  MSI-X completion vector. Some HCA's allocate multiple (n)
+		  MSI-X vectors per HCA port. If the IRQ affinity masks of
+		  these interrupts have been configured such that each MSI-X
+		  interrupt is handled by a different CPU then the comp_vector
+		  parameter can be used to spread the SRP completion workload
+		  over multiple CPU's.
+
+What:		/sys/class/infiniband_srp/srp-<hca>-<port_number>/ibdev
+Date:		January 2, 2006
+KernelVersion:	2.6.15
+Contact:	linux-rdma@vger.kernel.org
+Description:	HCA name (<hca>).
+
+What:		/sys/class/infiniband_srp/srp-<hca>-<port_number>/port
+Date:		January 2, 2006
+KernelVersion:	2.6.15
+Contact:	linux-rdma@vger.kernel.org
+Description:	HCA port number (<port_number>).
+
+What:		/sys/class/scsi_host/host<n>/allow_ext_sg
+Date:		May 19, 2011
+KernelVersion:	2.6.39
+Contact:	linux-rdma@vger.kernel.org
+Description:	Whether ib_srp is allowed to include a partial memory
+		descriptor list in an SRP_CMD when communicating with an SRP
+		target.
+
+What:		/sys/class/scsi_host/host<n>/cmd_sg_entries
+Date:		May 19, 2011
+KernelVersion:	2.6.39
+Contact:	linux-rdma@vger.kernel.org
+Description:	Maximum number of data buffer descriptors that may be sent to
+		the target in a single SRP_CMD request.
+
+What:		/sys/class/scsi_host/host<n>/dgid
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	InfiniBand destination GID used for communication with the SRP
+		target. Differs from orig_dgid if port redirection has happened.
+
+What:		/sys/class/scsi_host/host<n>/id_ext
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	Eight-byte identifier extension portion of the 16-byte target
+		port identifier.
+
+What:		/sys/class/scsi_host/host<n>/ioc_guid
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	Eight-byte I/O controller GUID portion of the 16-byte target
+		port identifier.
+
+What:		/sys/class/scsi_host/host<n>/local_ib_device
+Date:		November 29, 2006
+KernelVersion:	2.6.19
+Contact:	linux-rdma@vger.kernel.org
+Description:	Name of the InfiniBand HCA used for communicating with the
+		SRP target.
+
+What:		/sys/class/scsi_host/host<n>/local_ib_port
+Date:		November 29, 2006
+KernelVersion:	2.6.19
+Contact:	linux-rdma@vger.kernel.org
+Description:	Number of the HCA port used for communicating with the
+		SRP target.
+
+What:		/sys/class/scsi_host/host<n>/orig_dgid
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	InfiniBand destination GID specified in the parameters
+		written to the add_target sysfs attribute.
+
+What:		/sys/class/scsi_host/host<n>/pkey
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	A 16-bit number representing the InfiniBand partition key used
+		for communication with the SRP target.
+
+What:		/sys/class/scsi_host/host<n>/req_lim
+Date:		October 20, 2010
+KernelVersion:	2.6.36
+Contact:	linux-rdma@vger.kernel.org
+Description:	Number of requests ib_srp can send to the target before it has
+		to wait for more credits. For more information see also the
+		SRP credit algorithm in the SRP specification.
+
+What:		/sys/class/scsi_host/host<n>/service_id
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	InfiniBand service ID used for establishing communication with
+		the SRP	target.
+
+What:		/sys/class/scsi_host/host<n>/zero_req_lim
+Date:		September 20, 2006
+KernelVersion:	2.6.18
+Contact:	linux-rdma@vger.kernel.org
+Description:	Number of times the initiator had to wait before sending a
+		request to the target because it ran out of credits. For more
+		information see also the SRP credit algorithm in the SRP
+		specification.
diff --git a/Documentation/ABI/stable/sysfs-module b/Documentation/ABI/stable/sysfs-module
index a0dd21c6db59..6272ae5fb366 100644
--- a/Documentation/ABI/stable/sysfs-module
+++ b/Documentation/ABI/stable/sysfs-module
@@ -4,9 +4,13 @@ Description:
 
 	/sys/module/MODULENAME
 		The name of the module that is in the kernel.  This
-		module name will show up either if the module is built
-		directly into the kernel, or if it is loaded as a
-		dynamic module.
+		module name will always show up if the module is loaded as a
+		dynamic module.  If it is built directly into the kernel, it
+		will only show up if it has a version or at least one
+		parameter.
+
+		Note: The conditions of creation in the built-in case are not
+		by design and may be removed in the future.
 
 	/sys/module/MODULENAME/parameters
 		This directory contains individual files that are each
diff --git a/Documentation/ABI/stable/sysfs-transport-srp b/Documentation/ABI/stable/sysfs-transport-srp
new file mode 100644
index 000000000000..b36fb0dc13c8
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-transport-srp
@@ -0,0 +1,19 @@
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/delete
+Date:		June 1, 2012
+KernelVersion:	3.7
+Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description:	Instructs an SRP initiator to disconnect from a target and to
+		remove all LUNs imported from that target.
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/port_id
+Date:		June 27, 2007
+KernelVersion:	2.6.24
+Contact:	linux-scsi@vger.kernel.org
+Description:	16-byte local SRP port identifier in hexadecimal format. An
+		example: 4c:49:4e:55:58:20:56:49:4f:00:00:00:00:00:00:00.
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/roles
+Date:		June 27, 2007
+KernelVersion:	2.6.24
+Contact:	linux-scsi@vger.kernel.org
+Description:	Role of the remote port. Either "SRP Initiator" or "SRP Target".
diff --git a/Documentation/ABI/testing/configfs-usb-gadget b/Documentation/ABI/testing/configfs-usb-gadget
new file mode 100644
index 000000000000..01e769d6984d
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget
@@ -0,0 +1,81 @@
+What:		/config/usb-gadget
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+		This group contains sub-groups corresponding to created
+		USB gadgets.
+
+What:		/config/usb-gadget/gadget
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+
+		The attributes of a gadget:
+
+		UDC		- bind a gadget to UDC/unbind a gadget;
+				write UDC's name found in /sys/class/udc/*
+				to bind a gadget, empty string "" to unbind.
+
+		bDeviceClass	- USB device class code
+		bDeviceSubClass	- USB device subclass code
+		bDeviceProtocol	- USB device protocol code
+		bMaxPacketSize0	- maximum endpoint 0 packet size
+		bcdDevice	- bcd device release number
+		bcdUSB		- bcd USB specification version number
+		idProduct	- product ID
+		idVendor	- vendor ID
+
+What:		/config/usb-gadget/gadget/configs
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+		This group contains a USB gadget's configurations
+
+What:		/config/usb-gadget/gadget/configs/config
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+		The attributes of a configuration:
+
+		bmAttributes	- configuration characteristics
+		MaxPower	- maximum power consumption from the bus
+
+What:		/config/usb-gadget/gadget/configs/config/strings
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+		This group contains subdirectories for language-specific
+		strings for this configuration.
+
+What:		/config/usb-gadget/gadget/configs/config/strings/language
+Date:		Jun 2013
+KernelVersion:	3.11
+Description:
+		The attributes:
+
+		configuration	- configuration description
+
+
+What:		/config/usb-gadget/gadget/functions
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+		This group contains functions available to this USB gadget.
+
+What:		/config/usb-gadget/gadget/strings
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+		This group contains subdirectories for language-specific
+		strings for this gadget.
+
+What:		/config/usb-gadget/gadget/strings/language
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+		The attributes:
+
+		serialnumber	- gadget's serial number (string)
+		product		- gadget's product description
+		manufacturer	- gadget's manufacturer description
+
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-acm b/Documentation/ABI/testing/configfs-usb-gadget-acm
new file mode 100644
index 000000000000..5708a568b5f6
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-acm
@@ -0,0 +1,8 @@
+What:		/config/usb-gadget/gadget/functions/acm.name
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+
+		This item contains just one readonly attribute: port_num.
+		It contains the port number of the /dev/ttyGS<n> device
+		associated with acm function's instance "name".
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-ecm b/Documentation/ABI/testing/configfs-usb-gadget-ecm
new file mode 100644
index 000000000000..6b9a582ce0b5
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-ecm
@@ -0,0 +1,16 @@
+What:		/config/usb-gadget/gadget/functions/ecm.name
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+		The attributes:
+
+		ifname		- network device interface name associated with
+				this function instance
+		qmult		- queue length multiplier for high and
+				super speed
+		host_addr	- MAC address of host's end of this
+				Ethernet over USB link
+		dev_addr	- MAC address of device's end of this
+				Ethernet over USB link
+
+
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-eem b/Documentation/ABI/testing/configfs-usb-gadget-eem
new file mode 100644
index 000000000000..dbddf36b48b3
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-eem
@@ -0,0 +1,14 @@
+What:		/config/usb-gadget/gadget/functions/eem.name
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+		The attributes:
+
+		ifname		- network device interface name associated with
+				this function instance
+		qmult		- queue length multiplier for high and
+				super speed
+		host_addr	- MAC address of host's end of this
+				Ethernet over USB link
+		dev_addr	- MAC address of device's end of this
+				Ethernet over USB link
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-ncm b/Documentation/ABI/testing/configfs-usb-gadget-ncm
new file mode 100644
index 000000000000..bc309f42357d
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-ncm
@@ -0,0 +1,15 @@
+What:		/config/usb-gadget/gadget/functions/ncm.name
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+		The attributes:
+
+		ifname		- network device interface name associated with
+				this function instance
+		qmult		- queue length multiplier for high and
+				super speed
+		host_addr	- MAC address of host's end of this
+				Ethernet over USB link
+		dev_addr	- MAC address of device's end of this
+				Ethernet over USB link
+
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-obex b/Documentation/ABI/testing/configfs-usb-gadget-obex
new file mode 100644
index 000000000000..aaa5c96fb7c6
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-obex
@@ -0,0 +1,9 @@
+What:		/config/usb-gadget/gadget/functions/obex.name
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+
+		This item contains just one readonly attribute: port_num.
+		It contains the port number of the /dev/ttyGS<n> device
+		associated with obex function's instance "name".
+
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-phonet b/Documentation/ABI/testing/configfs-usb-gadget-phonet
new file mode 100644
index 000000000000..3e3b742cdfd7
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-phonet
@@ -0,0 +1,8 @@
+What:		/config/usb-gadget/gadget/functions/phonet.name
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+
+		This item contains just one readonly attribute: ifname.
+		It contains the network interface name assigned during
+		network device registration.
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-rndis b/Documentation/ABI/testing/configfs-usb-gadget-rndis
new file mode 100644
index 000000000000..822e6dad8fc0
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-rndis
@@ -0,0 +1,14 @@
+What:		/config/usb-gadget/gadget/functions/rndis.name
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+		The attributes:
+
+		ifname		- network device interface name associated with
+				this function instance
+		qmult		- queue length multiplier for high and
+				super speed
+		host_addr	- MAC address of host's end of this
+				Ethernet over USB link
+		dev_addr	- MAC address of device's end of this
+				Ethernet over USB link
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-serial b/Documentation/ABI/testing/configfs-usb-gadget-serial
new file mode 100644
index 000000000000..16f130c1501f
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-serial
@@ -0,0 +1,9 @@
+What:		/config/usb-gadget/gadget/functions/gser.name
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+
+		This item contains just one readonly attribute: port_num.
+		It contains the port number of the /dev/ttyGS<n> device
+		associated with gser function's instance "name".
+
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-subset b/Documentation/ABI/testing/configfs-usb-gadget-subset
new file mode 100644
index 000000000000..154ae597cd99
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-subset
@@ -0,0 +1,14 @@
+What:		/config/usb-gadget/gadget/functions/geth.name
+Date:		Jun 2013
+KenelVersion:	3.11
+Description:
+		The attributes:
+
+		ifname		- network device interface name associated with
+				this function instance
+		qmult		- queue length multiplier for high and
+				super speed
+		host_addr	- MAC address of host's end of this
+				Ethernet over USB link
+		dev_addr	- MAC address of device's end of this
+				Ethernet over USB link
diff --git a/Documentation/ABI/testing/dev-kmsg b/Documentation/ABI/testing/dev-kmsg
index 7e7e07a82e0e..bb820be48179 100644
--- a/Documentation/ABI/testing/dev-kmsg
+++ b/Documentation/ABI/testing/dev-kmsg
@@ -92,7 +92,7 @@ Description:	The /dev/kmsg character device node provides userspace access
 		The flags field carries '-' by default. A 'c' indicates a
 		fragment of a line. All following fragments are flagged with
 		'+'. Note, that these hints about continuation lines are not
-		neccessarily correct, and the stream could be interleaved with
+		necessarily correct, and the stream could be interleaved with
 		unrelated messages, but merging the lines in the output
 		usually produces better human readable results. A similar
 		logic is used internally when messages are printed to the
diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy
index 986946613542..f1c5cc9d17a8 100644
--- a/Documentation/ABI/testing/ima_policy
+++ b/Documentation/ABI/testing/ima_policy
@@ -18,17 +18,21 @@ Description:
 		rule format: action [condition ...]
 
 		action: measure | dont_measure | appraise | dont_appraise | audit
-		condition:= base | lsm
-			base:	[[func=] [mask=] [fsmagic=] [uid=] [fowner]]
+		condition:= base | lsm  [option]
+			base:	[[func=] [mask=] [fsmagic=] [fsuuid=] [uid=]
+				 [fowner]]
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
+			option:	[[appraise_type=]]
 
-		base: 	func:= [BPRM_CHECK][FILE_MMAP][FILE_CHECK]
+		base: 	func:= [BPRM_CHECK][MMAP_CHECK][FILE_CHECK][MODULE_CHECK]
 			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
 			fsmagic:= hex value
+			fsuuid:= file system UUID (e.g 8bcbe394-4f13-4144-be8e-5aa9ea2ce2f6)
 			uid:= decimal value
 			fowner:=decimal value
 		lsm:  	are LSM specific
+		option:	appraise_type:= [imasig]
 
 		default policy:
 			# PROC_SUPER_MAGIC
@@ -53,6 +57,7 @@ Description:
 			measure func=BPRM_CHECK
 			measure func=FILE_MMAP mask=MAY_EXEC
 			measure func=FILE_CHECK mask=MAY_READ uid=0
+			measure func=MODULE_CHECK uid=0
 			appraise fowner=0
 
 		The default policy measures all executables in bprm_check,
diff --git a/Documentation/ABI/testing/pstore b/Documentation/ABI/testing/pstore
index ff1df4e3b059..5fca9f5e10a3 100644
--- a/Documentation/ABI/testing/pstore
+++ b/Documentation/ABI/testing/pstore
@@ -1,4 +1,4 @@
-Where:		/dev/pstore/...
+Where:		/sys/fs/pstore/... (or /dev/pstore/...)
 Date:		March 2011
 Kernel Version: 2.6.39
 Contact:	tony.luck@intel.com
@@ -11,9 +11,9 @@ Description:	Generic interface to platform dependent persistent storage.
 		of the console log is captured, but other interesting
 		data can also be saved.
 
-		# mount -t pstore -o kmsg_bytes=8000 - /dev/pstore
+		# mount -t pstore -o kmsg_bytes=8000 - /sys/fs/pstore
 
-		$ ls -l /dev/pstore
+		$ ls -l /sys/fs/pstore/
 		total 0
 		-r--r--r-- 1 root root 7896 Nov 30 15:38 dmesg-erst-1
 
@@ -27,9 +27,9 @@ Description:	Generic interface to platform dependent persistent storage.
 		the file will signal to the underlying persistent storage
 		device that it can reclaim the space for later re-use.
 
-		$ rm /dev/pstore/dmesg-erst-1
+		$ rm /sys/fs/pstore/dmesg-erst-1
 
-		The expectation is that all files in /dev/pstore
+		The expectation is that all files in /sys/fs/pstore/
 		will be saved elsewhere and erased from persistent store
 		soon after boot to free up space ready for the next
 		catastrophe.
diff --git a/Documentation/ABI/testing/sysfs-block-bcache b/Documentation/ABI/testing/sysfs-block-bcache
new file mode 100644
index 000000000000..9e4bbc5d51fd
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-block-bcache
@@ -0,0 +1,156 @@
+What:		/sys/block/<disk>/bcache/unregister
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		A write to this file causes the backing device or cache to be
+		unregistered. If a backing device had dirty data in the cache,
+		writeback mode is automatically disabled and all dirty data is
+		flushed before the device is unregistered. Caches unregister
+		all associated backing devices before unregistering themselves.
+
+What:		/sys/block/<disk>/bcache/clear_stats
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		Writing to this file resets all the statistics for the device.
+
+What:		/sys/block/<disk>/bcache/cache
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a backing device that has cache, a symlink to
+		the bcache/ dir of that cache.
+
+What:		/sys/block/<disk>/bcache/cache_hits
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: integer number of full cache hits,
+		counted per bio. A partial cache hit counts as a miss.
+
+What:		/sys/block/<disk>/bcache/cache_misses
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: integer number of cache misses.
+
+What:		/sys/block/<disk>/bcache/cache_hit_ratio
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: cache hits as a percentage.
+
+What:		/sys/block/<disk>/bcache/sequential_cutoff
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: Threshold past which sequential IO will
+		skip the cache. Read and written as bytes in human readable
+		units (i.e. echo 10M > sequntial_cutoff).
+
+What:		/sys/block/<disk>/bcache/bypassed
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		Sum of all reads and writes that have bypassed the cache (due
+		to the sequential cutoff).  Expressed as bytes in human
+		readable units.
+
+What:		/sys/block/<disk>/bcache/writeback
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: When on, writeback caching is enabled and
+		writes will be buffered in the cache. When off, caching is in
+		writethrough mode; reads and writes will be added to the
+		cache but no write buffering will take place.
+
+What:		/sys/block/<disk>/bcache/writeback_running
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: when off, dirty data will not be written
+		from the cache to the backing device. The cache will still be
+		used to buffer writes until it is mostly full, at which point
+		writes transparently revert to writethrough mode. Intended only
+		for benchmarking/testing.
+
+What:		/sys/block/<disk>/bcache/writeback_delay
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: In writeback mode, when dirty data is
+		written to the cache and the cache held no dirty data for that
+		backing device, writeback from cache to backing device starts
+		after this delay, expressed as an integer number of seconds.
+
+What:		/sys/block/<disk>/bcache/writeback_percent
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: If nonzero, writeback from cache to
+		backing device only takes place when more than this percentage
+		of the cache is used, allowing more write coalescing to take
+		place and reducing total number of writes sent to the backing
+		device. Integer between 0 and 40.
+
+What:		/sys/block/<disk>/bcache/synchronous
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, a boolean that allows synchronous mode to be
+		switched on and off. In synchronous mode all writes are ordered
+		such that the cache can reliably recover from unclean shutdown;
+		if disabled bcache will not generally wait for writes to
+		complete but if the cache is not shut down cleanly all data
+		will be discarded from the cache. Should not be turned off with
+		writeback caching enabled.
+
+What:		/sys/block/<disk>/bcache/discard
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, a boolean allowing discard/TRIM to be turned off
+		or back on if the device supports it.
+
+What:		/sys/block/<disk>/bcache/bucket_size
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, bucket size in human readable units, as set at
+		cache creation time; should match the erase block size of the
+		SSD for optimal performance.
+
+What:		/sys/block/<disk>/bcache/nbuckets
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, the number of usable buckets.
+
+What:		/sys/block/<disk>/bcache/tree_depth
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, height of the btree excluding leaf nodes (i.e. a
+		one node tree will have a depth of 0).
+
+What:		/sys/block/<disk>/bcache/btree_cache_size
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		Number of btree buckets/nodes that are currently cached in
+		memory; cache dynamically grows and shrinks in response to
+		memory pressure from the rest of the system.
+
+What:		/sys/block/<disk>/bcache/written
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, total amount of data in human readable units
+		written to the cache, excluding all metadata.
+
+What:		/sys/block/<disk>/bcache/btree_written
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, sum of all btree writes in human readable units.
diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram
index ec93fe33baa6..3f0b9ae61d8c 100644
--- a/Documentation/ABI/testing/sysfs-block-zram
+++ b/Documentation/ABI/testing/sysfs-block-zram
@@ -5,20 +5,21 @@ Description:
 		The disksize file is read-write and specifies the disk size
 		which represents the limit on the *uncompressed* worth of data
 		that can be stored in this disk.
+		Unit: bytes
 
 What:		/sys/block/zram<id>/initstate
 Date:		August 2010
 Contact:	Nitin Gupta <ngupta@vflare.org>
 Description:
-		The disksize file is read-only and shows the initialization
+		The initstate file is read-only and shows the initialization
 		state of the device.
 
 What:		/sys/block/zram<id>/reset
 Date:		August 2010
 Contact:	Nitin Gupta <ngupta@vflare.org>
 Description:
-		The disksize file is write-only and allows resetting the
-		device. The reset operation frees all the memory assocaited
+		The reset file is write-only and allows resetting the
+		device. The reset operation frees all the memory associated
 		with this device.
 
 What:		/sys/block/zram<id>/num_reads
@@ -48,7 +49,7 @@ Contact:	Nitin Gupta <ngupta@vflare.org>
 Description:
 		The notify_free file is read-only and specifies the number of
 		swap slot free notifications received by this device. These
-		notifications are send to a swap block device when a swap slot
+		notifications are sent to a swap block device when a swap slot
 		is freed. This statistic is applicable only when this disk is
 		being used as a swap disk.
 
diff --git a/Documentation/ABI/testing/sysfs-bus-acpi b/Documentation/ABI/testing/sysfs-bus-acpi
new file mode 100644
index 000000000000..7fa9cbc75344
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-acpi
@@ -0,0 +1,58 @@
+What:		/sys/bus/acpi/devices/.../path
+Date:		December 2006
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		This attribute indicates the full path of ACPI namespace
+		object associated with the device object.  For example,
+		\_SB_.PCI0.
+		This file is not present for device objects representing
+		fixed ACPI hardware features (like power and sleep
+		buttons).
+
+What:		/sys/bus/acpi/devices/.../modalias
+Date:		July 2007
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		This attribute indicates the PNP IDs of the device object.
+		That is acpi:HHHHHHHH:[CCCCCCC:].  Where each HHHHHHHH or
+		CCCCCCCC contains device object's PNPID (_HID or _CID).
+
+What:		/sys/bus/acpi/devices/.../hid
+Date:		April 2005
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		This attribute indicates the hardware ID (_HID) of the
+		device object.  For example, PNP0103.
+		This file is present for device objects having the _HID
+		control method.
+
+What:		/sys/bus/acpi/devices/.../description
+Date:		October 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		This attribute contains the output of the device object's
+		_STR control method, if present.
+
+What:		/sys/bus/acpi/devices/.../adr
+Date:		October 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		This attribute contains the output of the device object's
+		_ADR control method, which is present for ACPI device
+		objects representing devices having standard enumeration
+		algorithms, such as PCI.
+
+What:		/sys/bus/acpi/devices/.../uid
+Date:		October 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		This attribute contains the output of the device object's
+		_UID control method, if present.
+
+What:		/sys/bus/acpi/devices/.../eject
+Date:		December 2006
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		Writing 1 to this attribute will trigger hot removal of
+		this device object.  This file exists for every device
+		object that has _EJ0 method.
diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-events b/Documentation/ABI/testing/sysfs-bus-event_source-devices-events
new file mode 100644
index 000000000000..3c1cc24361bd
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-events
@@ -0,0 +1,84 @@
+What:		/sys/devices/cpu/events/
+		/sys/devices/cpu/events/branch-misses
+		/sys/devices/cpu/events/cache-references
+		/sys/devices/cpu/events/cache-misses
+		/sys/devices/cpu/events/stalled-cycles-frontend
+		/sys/devices/cpu/events/branch-instructions
+		/sys/devices/cpu/events/stalled-cycles-backend
+		/sys/devices/cpu/events/instructions
+		/sys/devices/cpu/events/cpu-cycles
+
+Date:		2013/01/08
+
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+
+Description:	Generic performance monitoring events
+
+		A collection of performance monitoring events that may be
+		supported by many/most CPUs. These events can be monitored
+		using the 'perf(1)' tool.
+
+		The contents of each file would look like:
+
+			event=0xNNNN
+
+		where 'N' is a hex digit and the number '0xNNNN' shows the
+		"raw code" for the perf event identified by the file's
+		"basename".
+
+
+What: 		/sys/devices/cpu/events/PM_1PLUS_PPC_CMPL
+		/sys/devices/cpu/events/PM_BRU_FIN
+		/sys/devices/cpu/events/PM_BR_MPRED
+		/sys/devices/cpu/events/PM_CMPLU_STALL
+		/sys/devices/cpu/events/PM_CMPLU_STALL_BRU
+		/sys/devices/cpu/events/PM_CMPLU_STALL_DCACHE_MISS
+		/sys/devices/cpu/events/PM_CMPLU_STALL_DFU
+		/sys/devices/cpu/events/PM_CMPLU_STALL_DIV
+		/sys/devices/cpu/events/PM_CMPLU_STALL_ERAT_MISS
+		/sys/devices/cpu/events/PM_CMPLU_STALL_FXU
+		/sys/devices/cpu/events/PM_CMPLU_STALL_IFU
+		/sys/devices/cpu/events/PM_CMPLU_STALL_LSU
+		/sys/devices/cpu/events/PM_CMPLU_STALL_REJECT
+		/sys/devices/cpu/events/PM_CMPLU_STALL_SCALAR
+		/sys/devices/cpu/events/PM_CMPLU_STALL_SCALAR_LONG
+		/sys/devices/cpu/events/PM_CMPLU_STALL_STORE
+		/sys/devices/cpu/events/PM_CMPLU_STALL_THRD
+		/sys/devices/cpu/events/PM_CMPLU_STALL_VECTOR
+		/sys/devices/cpu/events/PM_CMPLU_STALL_VECTOR_LONG
+		/sys/devices/cpu/events/PM_CYC
+		/sys/devices/cpu/events/PM_GCT_NOSLOT_BR_MPRED
+		/sys/devices/cpu/events/PM_GCT_NOSLOT_BR_MPRED_IC_MISS
+		/sys/devices/cpu/events/PM_GCT_NOSLOT_CYC
+		/sys/devices/cpu/events/PM_GCT_NOSLOT_IC_MISS
+		/sys/devices/cpu/events/PM_GRP_CMPL
+		/sys/devices/cpu/events/PM_INST_CMPL
+		/sys/devices/cpu/events/PM_LD_MISS_L1
+		/sys/devices/cpu/events/PM_LD_REF_L1
+		/sys/devices/cpu/events/PM_RUN_CYC
+		/sys/devices/cpu/events/PM_RUN_INST_CMPL
+
+Date:		2013/01/08
+
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+		Linux Powerpc mailing list <linuxppc-dev@ozlabs.org>
+
+Description:	POWER-systems specific performance monitoring events
+
+		A collection of performance monitoring events that may be
+		supported by the POWER CPU. These events can be monitored
+		using the 'perf(1)' tool.
+
+		These events may not be supported by other CPUs.
+
+		The contents of each file would look like:
+
+			event=0xNNNN
+
+		where 'N' is a hex digit and the number '0xNNNN' shows the
+		"raw code" for the perf event identified by the file's
+		"basename".
+
+		Further, multiple terms like 'event=0xNNNN' can be specified
+		and separated with comma. All available terms are defined in
+		the /sys/bus/event_source/devices/<dev>/format file.
diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-format b/Documentation/ABI/testing/sysfs-bus-event_source-devices-format
index 079afc71363d..77f47ff5ee02 100644
--- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-format
+++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-format
@@ -9,6 +9,12 @@ Description:
 		we want to export, so that userspace can deal with sane
 		name/value pairs.
 
+		Userspace must be prepared for the possibility that attributes
+		define overlapping bit ranges. For example:
+			attr1 = 'config:0-23'
+			attr2 = 'config:0-7'
+			attr3 = 'config:12-35'
+
 		Example: 'config1:1,6-10,44'
 		Defines contents of attribute that occupies bits 1,6-10,44 of
 		perf_event_attr::config1.
diff --git a/Documentation/ABI/testing/sysfs-bus-fcoe b/Documentation/ABI/testing/sysfs-bus-fcoe
index 50e2a80ea28f..21640eaad371 100644
--- a/Documentation/ABI/testing/sysfs-bus-fcoe
+++ b/Documentation/ABI/testing/sysfs-bus-fcoe
@@ -1,14 +1,53 @@
-What:		/sys/bus/fcoe/ctlr_X
+What:		/sys/bus/fcoe/
+Date:		August 2012
+KernelVersion:	TBD
+Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
+Description:	The FCoE bus. Attributes in this directory are control interfaces.
+Attributes:
+
+	ctlr_create: 'FCoE Controller' instance creation interface. Writing an
+		     <ifname> to this file will allocate and populate sysfs with a
+		     fcoe_ctlr_device (ctlr_X). The user can then configure any
+		     per-port settings and finally write to the fcoe_ctlr_device's
+		     'start' attribute to begin the kernel's discovery and login
+		     process.
+
+	ctlr_destroy: 'FCoE Controller' instance removal interface. Writing a
+		       fcoe_ctlr_device's sysfs name to this file will log the
+		       fcoe_ctlr_device out of the fabric or otherwise connected
+		       FCoE devices. It will also free all kernel memory allocated
+		       for this fcoe_ctlr_device and any structures associated
+		       with it, this includes the scsi_host.
+
+What:		/sys/bus/fcoe/devices/ctlr_X
 Date:		March 2012
 KernelVersion:	TBD
 Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
-Description:	'FCoE Controller' instances on the fcoe bus
+Description:	'FCoE Controller' instances on the fcoe bus.
+		The FCoE Controller now has a three stage creation process.
+		1) Write interface name to ctlr_create 2) Configure the FCoE
+		Controller (ctlr_X) 3) Enable the FCoE Controller to begin
+		discovery and login. The FCoE Controller is destroyed by
+		writing it's name, i.e. ctlr_X to the ctlr_delete file.
+
 Attributes:
 
 	fcf_dev_loss_tmo: Device loss timeout peroid (see below). Changing
 			  this value will change the dev_loss_tmo for all
 			  FCFs discovered by this controller.
 
+	mode:		  Display or change the FCoE Controller's mode. Possible
+			  modes are 'Fabric' and 'VN2VN'. If a FCoE Controller
+			  is started in 'Fabric' mode then FIP FCF discovery is
+			  initiated and ultimately a fabric login is attempted.
+			  If a FCoE Controller is started in 'VN2VN' mode then
+			  FIP VN2VN discovery and login is performed. A FCoE
+			  Controller only supports one mode at a time.
+
+	enabled:	  Whether an FCoE controller is enabled or disabled.
+			  0 if disabled, 1 if enabled. Writing either 0 or 1
+			  to this file will enable or disable the FCoE controller.
+
 	lesb/link_fail:   Link Error Status Block (LESB) link failure count.
 
 	lesb/vlink_fail:  Link Error Status Block (LESB) virtual link
@@ -26,7 +65,7 @@ Attributes:
 
 Notes: ctlr_X (global increment starting at 0)
 
-What:		/sys/bus/fcoe/fcf_X
+What:		/sys/bus/fcoe/devices/fcf_X
 Date:		March 2012
 KernelVersion:	TBD
 Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 2f06d40fe07d..39c8de0e53d0 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -189,6 +189,14 @@ Description:
 		A computed peak value based on the sum squared magnitude of
 		the underlying value in the specified directions.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_raw
+KernelVersion:	3.8
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw pressure measurement from channel Y. Units after
+		application of scale and offset are kilopascal.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_offset
@@ -197,6 +205,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_tempY_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_offset
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -226,6 +236,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_magn_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_magn_x_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_magn_y_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_magn_z_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_scale
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -245,6 +257,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_calibbias
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -262,6 +276,8 @@ What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale
 What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale
 what		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale
 what		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -275,6 +291,8 @@ What:		/sys/.../iio:deviceX/in_voltage-voltage_scale_available
 What:		/sys/.../iio:deviceX/out_voltageX_scale_available
 What:		/sys/.../iio:deviceX/out_altvoltageX_scale_available
 What:		/sys/.../iio:deviceX/in_capacitance_scale_available
+What:		/sys/.../iio:deviceX/in_pressure_scale_available
+What:		/sys/.../iio:deviceX/in_pressureY_scale_available
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -333,6 +351,7 @@ Description:
 		6kohm_to_gnd: connected to ground via a 6kOhm resistor,
 		20kohm_to_gnd: connected to ground via a 20kOhm resistor,
 		100kohm_to_gnd: connected to ground via an 100kOhm resistor,
+		500kohm_to_gnd: connected to ground via a 500kOhm resistor,
 		three_state: left floating.
 		For a list of available output power down options read
 		outX_powerdown_mode_available. If Y is not present the
@@ -672,41 +691,45 @@ Description:
 		Actually start the buffer capture up.  Will start trigger
 		if first device and appropriate.
 
-What:		/sys/bus/iio/devices/iio:deviceX/buffer/scan_elements
+What:		/sys/bus/iio/devices/iio:deviceX/scan_elements
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Directory containing interfaces for elements that will be
 		captured for a single triggered sample set in the buffer.
 
-What:		/sys/.../buffer/scan_elements/in_accel_x_en
-What:		/sys/.../buffer/scan_elements/in_accel_y_en
-What:		/sys/.../buffer/scan_elements/in_accel_z_en
-What:		/sys/.../buffer/scan_elements/in_anglvel_x_en
-What:		/sys/.../buffer/scan_elements/in_anglvel_y_en
-What:		/sys/.../buffer/scan_elements/in_anglvel_z_en
-What:		/sys/.../buffer/scan_elements/in_magn_x_en
-What:		/sys/.../buffer/scan_elements/in_magn_y_en
-What:		/sys/.../buffer/scan_elements/in_magn_z_en
-What:		/sys/.../buffer/scan_elements/in_timestamp_en
-What:		/sys/.../buffer/scan_elements/in_voltageY_supply_en
-What:		/sys/.../buffer/scan_elements/in_voltageY_en
-What:		/sys/.../buffer/scan_elements/in_voltageY-voltageZ_en
-What:		/sys/.../buffer/scan_elements/in_incli_x_en
-What:		/sys/.../buffer/scan_elements/in_incli_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY-voltageZ_en
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_en
+What:		/sys/.../iio:deviceX/scan_elements/in_pressure_en
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Scan element control for triggered data capture.
 
-What:		/sys/.../buffer/scan_elements/in_accel_type
-What:		/sys/.../buffer/scan_elements/in_anglvel_type
-What:		/sys/.../buffer/scan_elements/in_magn_type
-What:		/sys/.../buffer/scan_elements/in_incli_type
-What:		/sys/.../buffer/scan_elements/in_voltageY_type
-What:		/sys/.../buffer/scan_elements/in_voltage_type
-What:		/sys/.../buffer/scan_elements/in_voltageY_supply_type
-What:		/sys/.../buffer/scan_elements/in_timestamp_type
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_type
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_type
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_type
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_type
+What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_type
+What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_type
+What:		/sys/.../iio:deviceX/scan_elements/in_pressure_type
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -730,27 +753,29 @@ Description:
 		For other storage combinations this attribute will be extended
 		appropriately.
 
-What:		/sys/.../buffer/scan_elements/in_accel_type_available
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_type_available
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		If the type parameter can take one of a small set of values,
 		this attribute lists them.
 
-What:		/sys/.../buffer/scan_elements/in_voltageY_index
-What:		/sys/.../buffer/scan_elements/in_voltageY_supply_index
-What:		/sys/.../buffer/scan_elements/in_accel_x_index
-What:		/sys/.../buffer/scan_elements/in_accel_y_index
-What:		/sys/.../buffer/scan_elements/in_accel_z_index
-What:		/sys/.../buffer/scan_elements/in_anglvel_x_index
-What:		/sys/.../buffer/scan_elements/in_anglvel_y_index
-What:		/sys/.../buffer/scan_elements/in_anglvel_z_index
-What:		/sys/.../buffer/scan_elements/in_magn_x_index
-What:		/sys/.../buffer/scan_elements/in_magn_y_index
-What:		/sys/.../buffer/scan_elements/in_magn_z_index
-What:		/sys/.../buffer/scan_elements/in_incli_x_index
-What:		/sys/.../buffer/scan_elements/in_incli_y_index
-What:		/sys/.../buffer/scan_elements/in_timestamp_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_index
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_index
+What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_index
+What:		/sys/.../iio:deviceX/scan_elements/in_pressure_index
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -768,3 +793,21 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		This attribute is used to read the amount of quadrature error
 		present in the device at a given time.
+
+What:		/sys/.../iio:deviceX/in_accelX_power_mode
+KernelVersion:	3.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the chip power mode.
+		low_noise: reduce noise level from ADC,
+		low_power: enable low current consumption.
+		For a list of available output power modes read
+		in_accel_power_mode_available.
+
+What:		/sys/bus/iio/devices/iio:deviceX/store_eeprom
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Writing '1' stores the current device configuration into
+		on-chip EEPROM. After power-up or chip reset the device will
+		automatically load the saved configuration.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
index 2ce9c3f68eee..a91aeabe7b24 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
+++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
@@ -18,14 +18,6 @@ Description:
 		Reading returns either '1' or '0'. '1' means that the
 		pllY is locked.
 
-What:		/sys/bus/iio/devices/iio:deviceX/store_eeprom
-KernelVersion:	3.4.0
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Writing '1' stores the current device configuration into
-		on-chip EEPROM. After power-up or chip reset the device will
-		automatically load the saved configuration.
-
 What:		/sys/bus/iio/devices/iio:deviceX/sync_dividers
 KernelVersion:	3.4.0
 Contact:	linux-iio@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350
index d89aded01c5a..1254457a726e 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350
+++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350
@@ -18,4 +18,4 @@ Description:
 		adjust the reference frequency accordingly.
 		The value written has no effect until out_altvoltageY_frequency
 		is updated. Consider to use out_altvoltageY_powerdown to power
-		down the PLL and it's RFOut buffers during REFin changes.
+		down the PLL and its RFOut buffers during REFin changes.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-mpu6050 b/Documentation/ABI/testing/sysfs-bus-iio-mpu6050
new file mode 100644
index 000000000000..cb53737aacbf
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-mpu6050
@@ -0,0 +1,13 @@
+What:           /sys/bus/iio/devices/iio:deviceX/in_gyro_matrix
+What:           /sys/bus/iio/devices/iio:deviceX/in_accel_matrix
+What:           /sys/bus/iio/devices/iio:deviceX/in_magn_matrix
+KernelVersion:  3.4.0
+Contact:        linux-iio@vger.kernel.org
+Description:
+		This is mounting matrix for motion sensors. Mounting matrix
+		is a 3x3 unitary matrix. A typical mounting matrix would look like
+		[0, 1, 0; 1, 0, 0; 0, 0, -1]. Using this information, it would be
+		easy to tell the relative positions among sensors as well as their
+		positions relative to the board that holds these sensors. Identity matrix
+		[1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and device are perfectly
+		aligned with each other. All axes are exactly the same.
diff --git a/Documentation/ABI/testing/sysfs-bus-mdio b/Documentation/ABI/testing/sysfs-bus-mdio
new file mode 100644
index 000000000000..6349749ebc29
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-mdio
@@ -0,0 +1,9 @@
+What:		/sys/bus/mdio_bus/devices/.../phy_id
+Date:		November 2012
+KernelVersion:	3.8
+Contact:	netdev@vger.kernel.org
+Description:
+		This attribute contains the 32-bit PHY Identifier as reported
+		by the device during bus enumeration, encoded in hexadecimal.
+		This ID is used to match the device with the appropriate
+		driver.
diff --git a/Documentation/ABI/testing/sysfs-bus-mei b/Documentation/ABI/testing/sysfs-bus-mei
new file mode 100644
index 000000000000..2066f0bbd453
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-mei
@@ -0,0 +1,7 @@
+What:		/sys/bus/mei/devices/.../modalias
+Date:		March 2013
+KernelVersion:	3.10
+Contact:	Samuel Ortiz <sameo@linux.intel.com>
+		linux-mei@linux.intel.com
+Description:	Stores the same MODALIAS value emitted by uevent
+		Format: mei:<mei device name>
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index dff1f48d252d..5210a51c90fd 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -64,7 +64,6 @@ Description:
 		Writing a non-zero value to this attribute will
 		force a rescan of all PCI buses in the system, and
 		re-discover previously removed devices.
-		Depends on CONFIG_HOTPLUG.
 
 What:		/sys/bus/pci/devices/.../msi_irqs/
 Date:		September, 2011
@@ -90,7 +89,6 @@ Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
 Description:
 		Writing a non-zero value to this attribute will
 		hot-remove the PCI device and any of its children.
-		Depends on CONFIG_HOTPLUG.
 
 What:		/sys/bus/pci/devices/.../pci_bus/.../rescan
 Date:		May 2011
@@ -99,7 +97,7 @@ Description:
 		Writing a non-zero value to this attribute will
 		force a rescan of the bus and all child buses,
 		and re-discover devices removed earlier from this
-		part of the device tree.  Depends on CONFIG_HOTPLUG.
+		part of the device tree.
 
 What:		/sys/bus/pci/devices/.../rescan
 Date:		January 2009
@@ -109,7 +107,6 @@ Description:
 		force a rescan of the device's parent bus and all
 		child buses, and re-discover devices removed earlier
 		from this part of the device tree.
-		Depends on CONFIG_HOTPLUG.
 
 What:		/sys/bus/pci/devices/.../reset
 Date:		July 2009
@@ -222,3 +219,37 @@ Description:
 		satisfied too.  Reading this attribute will show the current
 		value of d3cold_allowed bit.  Writing this attribute will set
 		the value of d3cold_allowed bit.
+
+What:		/sys/bus/pci/devices/.../sriov_totalvfs
+Date:		November 2012
+Contact:	Donald Dutile <ddutile@redhat.com>
+Description:
+		This file appears when a physical PCIe device supports SR-IOV.
+		Userspace applications can read this file to determine the
+		maximum number of Virtual Functions (VFs) a PCIe physical
+		function (PF) can support. Typically, this is the value reported
+		in the PF's SR-IOV extended capability structure's TotalVFs
+		element.  Drivers have the ability at probe time to reduce the
+		value read from this file via the pci_sriov_set_totalvfs()
+		function.
+
+What:		/sys/bus/pci/devices/.../sriov_numvfs
+Date:		November 2012
+Contact:	Donald Dutile <ddutile@redhat.com>
+Description:
+		This file appears when a physical PCIe device supports SR-IOV.
+		Userspace applications can read and write to this file to
+		determine and control the enablement or disablement of Virtual
+		Functions (VFs) on the physical function (PF). A read of this
+		file will return the number of VFs that are enabled on this PF.
+		A number written to this file will enable the specified
+		number of VFs. A userspace application would typically read the
+		file and check that the value is zero, and then write the number
+		of VFs that should be enabled on the PF; the value written
+		should be less than or equal to the value in the sriov_totalvfs
+		file. A userspace application wanting to disable the VFs would
+		write a zero to this file. The core ensures that valid values
+		are written to this file, and returns errors when values are not
+		valid.  For example, writing a 2 to this file when sriov_numvfs
+		is not 0 and not 2 already will return an error. Writing a 10
+		when the value of sriov_totalvfs is 8 will return an error.
diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd
index 1cf2adf46b11..0a306476424e 100644
--- a/Documentation/ABI/testing/sysfs-bus-rbd
+++ b/Documentation/ABI/testing/sysfs-bus-rbd
@@ -66,23 +66,7 @@ current_snap
 
 	The current snapshot for which the device is mapped.
 
-snap_*
-
-	A directory per each snapshot
-
-
-Entries under /sys/bus/rbd/devices/<dev-id>/snap_<snap-name>
--------------------------------------------------------------
-
-snap_id
-
-	The rados internal snapshot id assigned for this snapshot
-
-snap_size
-
-	The size of the image when this snapshot was taken.
-
-snap_features
-
-	A hexadecimal encoding of the feature bits for this snapshot.
+parent
 
+	Information identifying the pool, image, and snapshot id for
+	the parent image in a layered rbd image (format 2 only).
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index b6fbe514a869..1430f584b266 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -1,81 +1,3 @@
-What:		/sys/bus/usb/devices/.../power/autosuspend
-Date:		March 2007
-KernelVersion:	2.6.21
-Contact:	Alan Stern <stern@rowland.harvard.edu>
-Description:
-		Each USB device directory will contain a file named
-		power/autosuspend.  This file holds the time (in seconds)
-		the device must be idle before it will be autosuspended.
-		0 means the device will be autosuspended as soon as
-		possible.  Negative values will prevent the device from
-		being autosuspended at all, and writing a negative value
-		will resume the device if it is already suspended.
-
-		The autosuspend delay for newly-created devices is set to
-		the value of the usbcore.autosuspend module parameter.
-
-What:		/sys/bus/usb/devices/.../power/persist
-Date:		May 2007
-KernelVersion:	2.6.23
-Contact:	Alan Stern <stern@rowland.harvard.edu>
-Description:
-		If CONFIG_USB_PERSIST is set, then each USB device directory
-		will contain a file named power/persist.  The file holds a
-		boolean value (0 or 1) indicating whether or not the
-		"USB-Persist" facility is enabled for the device.  Since the
-		facility is inherently dangerous, it is disabled by default
-		for all devices except hubs.  For more information, see
-		Documentation/usb/persist.txt.
-
-What:		/sys/bus/usb/device/.../power/connected_duration
-Date:		January 2008
-KernelVersion:	2.6.25
-Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
-Description:
-		If CONFIG_PM and CONFIG_USB_SUSPEND are enabled, then this file
-		is present.  When read, it returns the total time (in msec)
-		that the USB device has been connected to the machine.  This
-		file is read-only.
-Users:
-		PowerTOP <power@bughost.org>
-		http://www.lesswatts.org/projects/powertop/
-
-What:		/sys/bus/usb/device/.../power/active_duration
-Date:		January 2008
-KernelVersion:	2.6.25
-Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
-Description:
-		If CONFIG_PM and CONFIG_USB_SUSPEND are enabled, then this file
-		is present.  When read, it returns the total time (in msec)
-		that the USB device has been active, i.e. not in a suspended
-		state.  This file is read-only.
-
-		Tools can use this file and the connected_duration file to
-		compute the percentage of time that a device has been active.
-		For example,
-		echo $((100 * `cat active_duration` / `cat connected_duration`))
-		will give an integer percentage.  Note that this does not
-		account for counter wrap.
-Users:
-		PowerTOP <power@bughost.org>
-		http://www.lesswatts.org/projects/powertop/
-
-What:		/sys/bus/usb/device/<busnum>-<devnum>...:<config num>-<interface num>/supports_autosuspend
-Date:		January 2008
-KernelVersion:	2.6.27
-Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
-Description:
-		When read, this file returns 1 if the interface driver
-		for this interface supports autosuspend.  It also
-		returns 1 if no driver has claimed this interface, as an
-		unclaimed interface will not stop the device from being
-		autosuspended if all other interface drivers are idle.
-		The file returns 0 if autosuspend support has not been
-		added to the driver.
-Users:
-		USB PM tool
-		git://git.moblin.org/users/sarah/usb-pm-tool/
-
 What:		/sys/bus/usb/device/.../authorized
 Date:		July 2008
 KernelVersion:	2.6.26
@@ -172,22 +94,11 @@ Description:
 		device IDs, exactly like reading from the entry
 		"/sys/bus/usb/drivers/.../new_id"
 
-What:		/sys/bus/usb/device/.../avoid_reset_quirk
-Date:		December 2009
-Contact:	Oliver Neukum <oliver@neukum.org>
-Description:
-		Writing 1 to this file tells the kernel that this
-		device will morph into another mode when it is reset.
-		Drivers will not use reset for error handling for
-		such devices.
-Users:
-		usb_modeswitch
-
 What:		/sys/bus/usb/devices/.../power/usb2_hardware_lpm
 Date:		September 2011
 Contact:	Andiry Xu <andiry.xu@amd.com>
 Description:
-		If CONFIG_USB_SUSPEND is set and a USB 2.0 lpm-capable device
+		If CONFIG_PM_RUNTIME is set and a USB 2.0 lpm-capable device
 		is plugged in to a xHCI host which support link PM, it will
 		perform a LPM test; if the test is passed and host supports
 		USB2 hardware LPM (xHCI 1.0 feature), USB2 hardware LPM will
@@ -227,3 +138,39 @@ Contact:	Lan Tianyu <tianyu.lan@intel.com>
 Description:
 		The /sys/bus/usb/devices/.../(hub interface)/portX
 		is usb port device's sysfs directory.
+
+What:		/sys/bus/usb/devices/.../(hub interface)/portX/connect_type
+Date:		January 2013
+Contact:	Lan Tianyu <tianyu.lan@intel.com>
+Description:
+		Some platforms provide usb port connect types through ACPI.
+		This attribute is to expose these information to user space.
+		The file will read "hotplug", "wired" and "not used" if the
+		information is available, and "unknown" otherwise.
+
+What:		/sys/bus/usb/devices/.../power/usb2_lpm_l1_timeout
+Date:		May 2013
+Contact:	Mathias Nyman <mathias.nyman@linux.intel.com>
+Description:
+		USB 2.0 devices may support hardware link power management (LPM)
+		L1 sleep state. The usb2_lpm_l1_timeout attribute allows
+		tuning the timeout for L1 inactivity timer (LPM timer), e.g.
+		needed inactivity time before host requests the device to go to L1 sleep.
+		Useful for power management tuning.
+		Supported values are 0 - 65535 microseconds.
+
+What:		/sys/bus/usb/devices/.../power/usb2_lpm_besl
+Date:		May 2013
+Contact:	Mathias Nyman <mathias.nyman@linux.intel.com>
+Description:
+		USB 2.0 devices that support hardware link power management (LPM)
+		L1 sleep state now use a best effort service latency value (BESL) to
+		indicate the best effort to resumption of service to the device after the
+		initiation of the resume event.
+		If the device does not have a preferred besl value then the host can select
+		one instead. This usb2_lpm_besl attribute allows to tune the host selected besl
+		value in order to tune power saving and service latency.
+
+		Supported values are 0 - 15.
+		More information on how besl values map to microseconds can be found in
+		USB 2.0 ECN Errata for Link Power Management, section 4.10)
diff --git a/Documentation/ABI/testing/sysfs-class-bdi b/Documentation/ABI/testing/sysfs-class-bdi
index 5f500977b42f..d773d5697cf5 100644
--- a/Documentation/ABI/testing/sysfs-class-bdi
+++ b/Documentation/ABI/testing/sysfs-class-bdi
@@ -48,3 +48,8 @@ max_ratio (read-write)
 	most of the write-back cache.  For example in case of an NFS
 	mount that is prone to get stuck, or a FUSE mount which cannot
 	be trusted to play fair.
+
+stable_pages_required (read-only)
+
+	If set, the backing device requires that all pages comprising a write
+	request must not be changed until writeout is complete.
diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq
index 23d78b5aab11..ee39acacf6f8 100644
--- a/Documentation/ABI/testing/sysfs-class-devfreq
+++ b/Documentation/ABI/testing/sysfs-class-devfreq
@@ -11,7 +11,7 @@ What:		/sys/class/devfreq/.../governor
 Date:		September 2011
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
 Description:
-		The /sys/class/devfreq/.../governor shows the name of the
+		The /sys/class/devfreq/.../governor show or set the name of the
 		governor used by the corresponding devfreq object.
 
 What:		/sys/class/devfreq/.../cur_freq
@@ -19,15 +19,16 @@ Date:		September 2011
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
 Description:
 		The /sys/class/devfreq/.../cur_freq shows the current
-		frequency of the corresponding devfreq object.
+		frequency of the corresponding devfreq object. Same as
+		target_freq when get_cur_freq() is not implemented by
+		devfreq driver.
 
-What:		/sys/class/devfreq/.../central_polling
-Date:		September 2011
-Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+What:		/sys/class/devfreq/.../target_freq
+Date:		September 2012
+Contact:	Rajagopal Venkat <rajagopal.venkat@linaro.org>
 Description:
-		The /sys/class/devfreq/.../central_polling shows whether
-		the devfreq ojbect is using devfreq-provided central
-		polling mechanism or not.
+		The /sys/class/devfreq/.../target_freq shows the next governor
+		predicted target frequency of the corresponding devfreq object.
 
 What:		/sys/class/devfreq/.../polling_interval
 Date:		September 2011
@@ -43,6 +44,17 @@ Description:
 		(/sys/class/devfreq/.../central_polling is 0), this value
 		may be useless.
 
+What:		/sys/class/devfreq/.../trans_stat
+Date:		October 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Descrtiption:
+		This ABI shows the statistics of devfreq behavior on a
+		specific device. It shows the time spent in each state and
+		the number of transitions between states.
+		In order to activate this ABI, the devfreq target device
+		driver should provide the list of available frequencies
+		with its profile.
+
 What:		/sys/class/devfreq/.../userspace/set_freq
 Date:		September 2011
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
@@ -50,3 +62,39 @@ Description:
 		The /sys/class/devfreq/.../userspace/set_freq shows and
 		sets the requested frequency for the devfreq object if
 		userspace governor is in effect.
+
+What:		/sys/class/devfreq/.../available_frequencies
+Date:		October 2012
+Contact:	Nishanth Menon <nm@ti.com>
+Description:
+		The /sys/class/devfreq/.../available_frequencies shows
+		the available frequencies of the corresponding devfreq object.
+		This is a snapshot of available frequencies and not limited
+		by the min/max frequency restrictions.
+
+What:		/sys/class/devfreq/.../available_governors
+Date:		October 2012
+Contact:	Nishanth Menon <nm@ti.com>
+Description:
+		The /sys/class/devfreq/.../available_governors shows
+		currently available governors in the system.
+
+What:		/sys/class/devfreq/.../min_freq
+Date:		January 2013
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../min_freq shows and stores
+		the minimum frequency requested by users. It is 0 if
+		the user does not care. min_freq overrides the
+		frequency requested by governors.
+
+What:		/sys/class/devfreq/.../max_freq
+Date:		January 2013
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../max_freq shows and stores
+		the maximum frequency requested by users. It is 0 if
+		the user does not care. max_freq overrides the
+		frequency requested by governors and min_freq.
+		The max_freq overrides min_freq because max_freq may be
+		used to throttle devices to avoid overheating.
diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd
index 938ef71e2035..bfd119ace6ad 100644
--- a/Documentation/ABI/testing/sysfs-class-mtd
+++ b/Documentation/ABI/testing/sysfs-class-mtd
@@ -14,8 +14,7 @@ Description:
 		The /sys/class/mtd/mtd{0,1,2,3,...} directories correspond
 		to each /dev/mtdX character device.  These may represent
 		physical/simulated flash devices, partitions on a flash
-		device, or concatenated flash devices.  They exist regardless
-		of whether CONFIG_MTD_CHAR is actually enabled.
+		device, or concatenated flash devices.
 
 What:		/sys/class/mtd/mtdXro/
 Date:		April 2009
@@ -23,8 +22,7 @@ KernelVersion:	2.6.29
 Contact:	linux-mtd@lists.infradead.org
 Description:
 		These directories provide the corresponding read-only device
-		nodes for /sys/class/mtd/mtdX/ .  They are only created
-		(for the benefit of udev) if CONFIG_MTD_CHAR is enabled.
+		nodes for /sys/class/mtd/mtdX/ .
 
 What:		/sys/class/mtd/mtdX/dev
 Date:		April 2009
@@ -130,9 +128,8 @@ KernelVersion:	3.4
 Contact:	linux-mtd@lists.infradead.org
 Description:
 		Maximum number of bit errors that the device is capable of
-		correcting within each region covering an ecc step.  This will
-		always be a non-negative integer.  Note that some devices will
-		have multiple ecc steps within each writesize region.
+		correcting within each region covering an ECC step (see
+		ecc_step_size).  This will always be a non-negative integer.
 
 		In the case of devices lacking any ECC capability, it is 0.
 
@@ -175,3 +172,15 @@ Description:
 		This is generally applicable only to NAND flash devices with ECC
 		capability.  It is ignored on devices lacking ECC capability;
 		i.e., devices for which ecc_strength is zero.
+
+What:		/sys/class/mtd/mtdX/ecc_step_size
+Date:		May 2013
+KernelVersion:	3.10
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		The size of a single region covered by ECC, known as the ECC
+		step.  Devices may have several equally sized ECC steps within
+		each writesize region.
+
+		It will always be a non-negative integer.  In the case of
+		devices lacking any ECC capability, it is 0.
diff --git a/Documentation/ABI/testing/sysfs-class-net-batman-adv b/Documentation/ABI/testing/sysfs-class-net-batman-adv
index 38dd762def4b..bdc00707c751 100644
--- a/Documentation/ABI/testing/sysfs-class-net-batman-adv
+++ b/Documentation/ABI/testing/sysfs-class-net-batman-adv
@@ -1,4 +1,10 @@
 
+What:           /sys/class/net/<iface>/batman-adv/iface_status
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Indicates the status of <iface> as it is seen by batman.
+
 What:           /sys/class/net/<iface>/batman-adv/mesh_iface
 Date:           May 2010
 Contact:        Marek Lindner <lindner_marek@yahoo.de>
@@ -7,8 +13,3 @@ Description:
                 displays the batman mesh interface this <iface>
                 currently is associated with.
 
-What:           /sys/class/net/<iface>/batman-adv/iface_status
-Date:           May 2010
-Contact:        Marek Lindner <lindner_marek@yahoo.de>
-Description:
-                Indicates the status of <iface> as it is seen by batman.
diff --git a/Documentation/ABI/testing/sysfs-class-net-grcan b/Documentation/ABI/testing/sysfs-class-net-grcan
new file mode 100644
index 000000000000..f418c92ca555
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-grcan
@@ -0,0 +1,35 @@
+
+What:		/sys/class/net/<iface>/grcan/enable0
+Date:		October 2012
+KernelVersion:	3.8
+Contact:	Andreas Larsson <andreas@gaisler.com>
+Description:
+		Hardware configuration of physical interface 0. This file reads
+		and writes the "Enable 0" bit of the configuration register.
+		Possible values: 0 or 1. See the GRCAN chapter of the GRLIB IP
+		core library documentation for details. The default value is 0
+		or set by the module parameter grcan.enable0 and can be read at
+		/sys/module/grcan/parameters/enable0.
+
+What:		/sys/class/net/<iface>/grcan/enable1
+Date:		October 2012
+KernelVersion:	3.8
+Contact:	Andreas Larsson <andreas@gaisler.com>
+Description:
+		Hardware configuration of physical interface 1. This file reads
+		and writes the "Enable 1" bit of the configuration register.
+		Possible values: 0 or 1. See the GRCAN chapter of the GRLIB IP
+		core library documentation for details. The default value is 0
+		or set by the module parameter grcan.enable1 and can be read at
+		/sys/module/grcan/parameters/enable1.
+
+What:		/sys/class/net/<iface>/grcan/select
+Date:		October 2012
+KernelVersion:	3.8
+Contact:	Andreas Larsson <andreas@gaisler.com>
+Description:
+		Configuration of which physical interface to be used. Possible
+		values: 0 or 1. See the GRCAN chapter of the GRLIB IP core
+		library documentation for details. The default value is 0 or is
+		set by the module parameter grcan.select and can be read at
+		/sys/module/grcan/parameters/select.
diff --git a/Documentation/ABI/testing/sysfs-class-net-mesh b/Documentation/ABI/testing/sysfs-class-net-mesh
index c81fe89c4c46..bdcd8b4e38f2 100644
--- a/Documentation/ABI/testing/sysfs-class-net-mesh
+++ b/Documentation/ABI/testing/sysfs-class-net-mesh
@@ -6,6 +6,14 @@ Description:
                 Indicates whether the batman protocol messages of the
                 mesh <mesh_iface> shall be aggregated or not.
 
+What:           /sys/class/net/<mesh_iface>/mesh/ap_isolation
+Date:           May 2011
+Contact:        Antonio Quartulli <ordex@autistici.org>
+Description:
+                Indicates whether the data traffic going from a
+                wireless client to another wireless client will be
+                silently dropped.
+
 What:           /sys/class/net/<mesh_iface>/mesh/bonding
 Date:           June 2010
 Contact:        Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
@@ -31,14 +39,6 @@ Description:
                 mesh will be fragmented or silently discarded if the
                 packet size exceeds the outgoing interface MTU.
 
-What:		/sys/class/net/<mesh_iface>/mesh/ap_isolation
-Date:		May 2011
-Contact:	Antonio Quartulli <ordex@autistici.org>
-Description:
-		Indicates whether the data traffic going from a
-		wireless client to another wireless client will be
-		silently dropped.
-
 What:           /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
 Date:           October 2010
 Contact:        Marek Lindner <lindner_marek@yahoo.de>
@@ -60,6 +60,21 @@ Description:
                 Defines the selection criteria this node will use
                 to choose a gateway if gw_mode was set to 'client'.
 
+What:           /sys/class/net/<mesh_iface>/mesh/hop_penalty
+Date:           Oct 2010
+Contact:        Linus Lüssing <linus.luessing@web.de>
+Description:
+                Defines the penalty which will be applied to an
+                originator message's tq-field on every hop.
+
+What:           /sys/class/net/<mesh_iface>/mesh/network_coding
+Date:           Nov 2012
+Contact:        Martin Hundeboll <martin@hundeboll.net>
+Description:
+                Controls whether Network Coding (using some magic
+                to send fewer wifi packets but still the same
+                content) is enabled or not.
+
 What:           /sys/class/net/<mesh_iface>/mesh/orig_interval
 Date:           May 2010
 Contact:        Marek Lindner <lindner_marek@yahoo.de>
@@ -67,19 +82,12 @@ Description:
                 Defines the interval in milliseconds in which batman
                 sends its protocol messages.
 
-What:           /sys/class/net/<mesh_iface>/mesh/hop_penalty
-Date:           Oct 2010
-Contact:        Linus Lüssing <linus.luessing@web.de>
-Description:
-		Defines the penalty which will be applied to an
-		originator message's tq-field on every hop.
-
-What:		/sys/class/net/<mesh_iface>/mesh/routing_algo
-Date:		Dec 2011
-Contact:	Marek Lindner <lindner_marek@yahoo.de>
+What:           /sys/class/net/<mesh_iface>/mesh/routing_algo
+Date:           Dec 2011
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
 Description:
-		Defines the routing procotol this mesh instance
-		uses to find the optimal paths through the mesh.
+                Defines the routing procotol this mesh instance
+                uses to find the optimal paths through the mesh.
 
 What:           /sys/class/net/<mesh_iface>/mesh/vis_mode
 Date:           May 2010
diff --git a/Documentation/ABI/testing/sysfs-class-pwm b/Documentation/ABI/testing/sysfs-class-pwm
new file mode 100644
index 000000000000..c479d77b67c5
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-pwm
@@ -0,0 +1,79 @@
+What:		/sys/class/pwm/
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		The pwm/ class sub-directory belongs to the Generic PWM
+		Framework and provides a sysfs interface for using PWM
+		channels.
+
+What:		/sys/class/pwm/pwmchipN/
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		A /sys/class/pwm/pwmchipN directory is created for each
+		probed PWM controller/chip where N is the base of the
+		PWM chip.
+
+What:		/sys/class/pwm/pwmchipN/npwm
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		The number of PWM channels supported by the PWM chip.
+
+What:		/sys/class/pwm/pwmchipN/export
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		Exports a PWM channel from the PWM chip for sysfs control.
+		Value is between 0 and /sys/class/pwm/pwmchipN/npwm - 1.
+
+What:		/sys/class/pwm/pwmchipN/unexport
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		Unexports a PWM channel.
+
+What:		/sys/class/pwm/pwmchipN/pwmX
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		A /sys/class/pwm/pwmchipN/pwmX directory is created for
+		each exported PWM channel where X is the exported PWM
+		channel number.
+
+What:		/sys/class/pwm/pwmchipN/pwmX/period
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		Sets the PWM signal period in nanoseconds.
+
+What:		/sys/class/pwm/pwmchipN/pwmX/duty_cycle
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		Sets the PWM signal duty cycle in nanoseconds.
+
+What:		/sys/class/pwm/pwmchipN/pwmX/polarity
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		Sets the output polarity of the PWM signal to "normal" or
+		"inversed".
+
+What:		/sys/class/pwm/pwmchipN/pwmX/enable
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		Enable/disable the PWM signal.
+		0 is disabled
+		1 is enabled
diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
index 25b1e751b777..5977e2875325 100644
--- a/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
+++ b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
@@ -36,3 +36,22 @@ Description:
 
                 Refer to [ECMA-368] section 10.3.1.1 for the value to
                 use.
+
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_dnts
+Date:           June 2013
+KernelVersion:  3.11
+Contact:        Thomas Pugliese <thomas.pugliese@gmail.com>
+Description:
+                The device notification time slot (DNTS) count and inverval in
+                milliseconds that the WUSB host should use.  This controls how
+                often the devices will have the opportunity to send
+                notifications to the host.
+
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_retry_count
+Date:           June 2013
+KernelVersion:  3.11
+Contact:        Thomas Pugliese <thomas.pugliese@gmail.com>
+Description:
+                The number of retries that the WUSB host should attempt
+                before reporting an error for a bus transaction.  The range of
+                valid values is [0..15], where 0 indicates infinite retries.
diff --git a/Documentation/ABI/testing/sysfs-devices-edac b/Documentation/ABI/testing/sysfs-devices-edac
index 30ee78aaed75..6568e0010e1a 100644
--- a/Documentation/ABI/testing/sysfs-devices-edac
+++ b/Documentation/ABI/testing/sysfs-devices-edac
@@ -77,7 +77,7 @@ Description:	Read/Write attribute file that controls memory scrubbing.
 
 What:		/sys/devices/system/edac/mc/mc*/max_location
 Date:		April 2012
-Contact:	Mauro Carvalho Chehab <mchehab@redhat.com>
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
 		linux-edac@vger.kernel.org
 Description:	This attribute file displays the information about the last
 		available memory slot in this memory controller. It is used by
@@ -85,7 +85,7 @@ Description:	This attribute file displays the information about the last
 
 What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/size
 Date:		April 2012
-Contact:	Mauro Carvalho Chehab <mchehab@redhat.com>
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
 		linux-edac@vger.kernel.org
 Description:	This attribute file will display the size of dimm or rank.
 		For dimm*/size, this is the size, in MB of the DIMM memory
@@ -96,14 +96,14 @@ Description:	This attribute file will display the size of dimm or rank.
 
 What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_dev_type
 Date:		April 2012
-Contact:	Mauro Carvalho Chehab <mchehab@redhat.com>
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
 		linux-edac@vger.kernel.org
 Description:	This attribute file will display what type of DRAM device is
 		being utilized on this DIMM (x1, x2, x4, x8, ...).
 
 What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_edac_mode
 Date:		April 2012
-Contact:	Mauro Carvalho Chehab <mchehab@redhat.com>
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
 		linux-edac@vger.kernel.org
 Description:	This attribute file will display what type of Error detection
 		and correction is being utilized. For example: S4ECD4ED would
@@ -111,7 +111,7 @@ Description:	This attribute file will display what type of Error detection
 
 What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_label
 Date:		April 2012
-Contact:	Mauro Carvalho Chehab <mchehab@redhat.com>
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
 		linux-edac@vger.kernel.org
 Description:	This control file allows this DIMM to have a label assigned
 		to it. With this label in the module, when errors occur
@@ -126,14 +126,14 @@ Description:	This control file allows this DIMM to have a label assigned
 
 What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_location
 Date:		April 2012
-Contact:	Mauro Carvalho Chehab <mchehab@redhat.com>
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
 		linux-edac@vger.kernel.org
 Description:	This attribute file will display the location (csrow/channel,
 		branch/channel/slot or channel/slot) of the dimm or rank.
 
 What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_mem_type
 Date:		April 2012
-Contact:	Mauro Carvalho Chehab <mchehab@redhat.com>
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
 		linux-edac@vger.kernel.org
 Description:	This attribute file will display what type of memory is
 		currently on this csrow. Normally, either buffered or
diff --git a/Documentation/ABI/testing/sysfs-devices-lpss_ltr b/Documentation/ABI/testing/sysfs-devices-lpss_ltr
new file mode 100644
index 000000000000..ea9298d9bbaf
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-lpss_ltr
@@ -0,0 +1,44 @@
+What:		/sys/devices/.../lpss_ltr/
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/ directory is only present for
+		devices included into the Intel Lynxpoint Low Power Subsystem
+		(LPSS).  If present, it contains attributes containing the LTR
+		mode and the values of LTR registers of the device.
+
+What:		/sys/devices/.../lpss_ltr/ltr_mode
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/ltr_mode attribute contains an
+		integer number (0 or 1) indicating whether or not the devices'
+		LTR functionality is working in the software mode (1).
+
+		This attribute is read-only.  If the device's runtime PM status
+		is not "active", attempts to read from this attribute cause
+		-EAGAIN to be returned.
+
+What:		/sys/devices/.../lpss_ltr/auto_ltr
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/auto_ltr attribute contains the
+		current value of the device's AUTO_LTR register (raw)
+		represented as an 8-digit hexadecimal number.
+
+		This attribute is read-only.  If the device's runtime PM status
+		is not "active", attempts to read from this attribute cause
+		-EAGAIN to be returned.
+
+What:		/sys/devices/.../lpss_ltr/sw_ltr
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/auto_ltr attribute contains the
+		current value of the device's SW_LTR register (raw) represented
+		as an 8-digit hexadecimal number.
+
+		This attribute is read-only.  If the device's runtime PM status
+		is not "active", attempts to read from this attribute cause
+		-EAGAIN to be returned.
diff --git a/Documentation/ABI/testing/sysfs-devices-node b/Documentation/ABI/testing/sysfs-devices-node
deleted file mode 100644
index 453a210c3ceb..000000000000
--- a/Documentation/ABI/testing/sysfs-devices-node
+++ /dev/null
@@ -1,7 +0,0 @@
-What:		/sys/devices/system/node/nodeX/compact
-Date:		February 2010
-Contact:	Mel Gorman <mel@csn.ul.ie>
-Description:
-		When this file is written to, all memory within that node
-		will be compacted. When it completes, memory will be freed
-		into blocks which have as many contiguous pages as possible
diff --git a/Documentation/ABI/testing/sysfs-devices-online b/Documentation/ABI/testing/sysfs-devices-online
new file mode 100644
index 000000000000..f990026c0740
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-online
@@ -0,0 +1,20 @@
+What:		/sys/devices/.../online
+Date:		April 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../online attribute is only present for
+		devices whose bus types provide .online() and .offline()
+		callbacks.  The number read from it (0 or 1) reflects the value
+		of the device's 'offline' field.  If that number is 1 and '0'
+		(or 'n', or 'N') is written to this file, the device bus type's
+		.offline() callback is executed for the device and (if
+		successful) its 'offline' field is updated accordingly.  In
+		turn, if that number is 0 and '1' (or 'y', or 'Y') is written to
+		this file, the device bus type's .online() callback is executed
+		for the device and (if successful) its 'offline' field is
+		updated as appropriate.
+
+		After a successful execution of the bus type's .offline()
+		callback the device cannot be used for any purpose until either
+		it is removed (i.e. device_del() is called for it), or its bus
+		type's .online() is exeucted successfully.
diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power
index 45000f0db4d4..efe449bdf811 100644
--- a/Documentation/ABI/testing/sysfs-devices-power
+++ b/Documentation/ABI/testing/sysfs-devices-power
@@ -1,6 +1,6 @@
 What:		/sys/devices/.../power/
 Date:		January 2009
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../power directory contains attributes
 		allowing the user space to check and modify some power
@@ -8,7 +8,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup
 Date:		January 2009
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../power/wakeup attribute allows the user
 		space to check if the device is enabled to wake up the system
@@ -34,7 +34,7 @@ Description:
 
 What:		/sys/devices/.../power/control
 Date:		January 2009
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../power/control attribute allows the user
 		space to control the run-time power management of the device.
@@ -53,7 +53,7 @@ Description:
 
 What:		/sys/devices/.../power/async
 Date:		January 2009
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../async attribute allows the user space to
 		enable or diasble the device's suspend and resume callbacks to
@@ -79,7 +79,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_count
 Date:		September 2010
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_count attribute contains the number
 		of signaled wakeup events associated with the device.  This
@@ -88,7 +88,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_active_count
 Date:		September 2010
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_active_count attribute contains the
 		number of times the processing of wakeup events associated with
@@ -98,7 +98,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_abort_count
 Date:		February 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_abort_count attribute contains the
 		number of times the processing of a wakeup event associated with
@@ -109,7 +109,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_expire_count
 Date:		February 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_expire_count attribute contains the
 		number of times a wakeup event associated with the device has
@@ -119,7 +119,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_active
 Date:		September 2010
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_active attribute contains either 1,
 		or 0, depending on whether or not a wakeup event associated with
@@ -129,7 +129,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_total_time_ms
 Date:		September 2010
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_total_time_ms attribute contains
 		the total time of processing wakeup events associated with the
@@ -139,7 +139,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_max_time_ms
 Date:		September 2010
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_max_time_ms attribute contains
 		the maximum time of processing a single wakeup event associated
@@ -149,7 +149,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_last_time_ms
 Date:		September 2010
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_last_time_ms attribute contains
 		the value of the monotonic clock corresponding to the time of
@@ -160,11 +160,11 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_prevent_sleep_time_ms
 Date:		February 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute
 		contains the total time the device has been preventing
-		opportunistic transitions to sleep states from occuring.
+		opportunistic transitions to sleep states from occurring.
 		This attribute is read-only.  If the device is not enabled to
 		wake up the system from sleep states, this attribute is not
 		present.
@@ -189,7 +189,7 @@ Description:
 
 What:		/sys/devices/.../power/pm_qos_latency_us
 Date:		March 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../power/pm_qos_resume_latency_us attribute
 		contains the PM QoS resume latency limit for the given device,
@@ -204,3 +204,34 @@ Description:
 
 		This attribute has no effect on system-wide suspend/resume and
 		hibernation.
+
+What:		/sys/devices/.../power/pm_qos_no_power_off
+Date:		September 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../power/pm_qos_no_power_off attribute
+		is used for manipulating the PM QoS "no power off" flag.  If
+		set, this flag indicates to the kernel that power should not
+		be removed entirely from the device.
+
+		Not all drivers support this attribute.  If it isn't supported,
+		it is not present.
+
+		This attribute has no effect on system-wide suspend/resume and
+		hibernation.
+
+What:		/sys/devices/.../power/pm_qos_remote_wakeup
+Date:		September 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../power/pm_qos_remote_wakeup attribute
+		is used for manipulating the PM QoS "remote wakeup required"
+		flag.  If set, this flag indicates to the kernel that the
+		device is a source of user events that have to be signaled from
+		its low-power states.
+
+		Not all drivers support this attribute.  If it isn't supported,
+		it is not present.
+
+		This attribute has no effect on system-wide suspend/resume and
+		hibernation.
diff --git a/Documentation/ABI/testing/sysfs-devices-power_resources_D0 b/Documentation/ABI/testing/sysfs-devices-power_resources_D0
new file mode 100644
index 000000000000..73b77a6be196
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-power_resources_D0
@@ -0,0 +1,13 @@
+What:		/sys/devices/.../power_resources_D0/
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_D0/ directory is only
+		present for device objects representing ACPI device nodes that
+		use ACPI power resources for power management.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be in ACPI power state D0.  The names
+		of the links are the same as the names of the directories they
+		point to.
diff --git a/Documentation/ABI/testing/sysfs-devices-power_resources_D1 b/Documentation/ABI/testing/sysfs-devices-power_resources_D1
new file mode 100644
index 000000000000..30c20703fb8c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-power_resources_D1
@@ -0,0 +1,14 @@
+What:		/sys/devices/.../power_resources_D1/
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_D1/ directory is only
+		present for device objects representing ACPI device nodes that
+		use ACPI power resources for power management and support ACPI
+		power state D1.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be in ACPI power state D1.  The names
+		of the links are the same as the names of the directories they
+		point to.
diff --git a/Documentation/ABI/testing/sysfs-devices-power_resources_D2 b/Documentation/ABI/testing/sysfs-devices-power_resources_D2
new file mode 100644
index 000000000000..fd9d84b421e1
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-power_resources_D2
@@ -0,0 +1,14 @@
+What:		/sys/devices/.../power_resources_D2/
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_D2/ directory is only
+		present for device objects representing ACPI device nodes that
+		use ACPI power resources for power management and support ACPI
+		power state D2.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be in ACPI power state D2.  The names
+		of the links are the same as the names of the directories they
+		point to.
diff --git a/Documentation/ABI/testing/sysfs-devices-power_resources_D3hot b/Documentation/ABI/testing/sysfs-devices-power_resources_D3hot
new file mode 100644
index 000000000000..3df32c20addf
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-power_resources_D3hot
@@ -0,0 +1,14 @@
+What:		/sys/devices/.../power_resources_D3hot/
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_D3hot/ directory is only
+		present for device objects representing ACPI device nodes that
+		use ACPI power resources for power management and support ACPI
+		power state D3hot.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be in ACPI power state D3hot.  The
+		names of the links are the same as the names of the directories
+		they point to.
diff --git a/Documentation/ABI/testing/sysfs-devices-power_resources_wakeup b/Documentation/ABI/testing/sysfs-devices-power_resources_wakeup
new file mode 100644
index 000000000000..e0588feeb6e1
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-power_resources_wakeup
@@ -0,0 +1,13 @@
+What:		/sys/devices/.../power_resources_wakeup/
+Date:		April 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_wakeup/ directory is only
+		present for device objects representing ACPI device nodes that
+		require ACPI power resources for wakeup signaling.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be able to signal wakeup.  The names of
+		the links are the same as the names of the directories they
+		point to.
diff --git a/Documentation/ABI/testing/sysfs-devices-power_state b/Documentation/ABI/testing/sysfs-devices-power_state
new file mode 100644
index 000000000000..7ad9546748f0
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-power_state
@@ -0,0 +1,20 @@
+What:		/sys/devices/.../power_state
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_state attribute is only present for
+		device objects representing ACPI device nodes that provide power
+		management methods.
+
+		If present, it contains a string representing the current ACPI
+		power state of the given device node.  Its possible values,
+		"D0", "D1", "D2", "D3hot", and "D3cold", reflect the power state
+		names defined by the ACPI specification (ACPI 4 and above).
+
+		If the device node uses shared ACPI power resources, this state
+		determines a list of power resources required not to be turned
+		off.  However, some power resources needed by the device node in
+		higher-power (lower-number) states may also be ON because of
+		some other devices using them at the moment.
+
+		This attribute is read-only.
diff --git a/Documentation/ABI/testing/sysfs-devices-real_power_state b/Documentation/ABI/testing/sysfs-devices-real_power_state
new file mode 100644
index 000000000000..8b3527c82a7d
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-real_power_state
@@ -0,0 +1,23 @@
+What:		/sys/devices/.../real_power_state
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../real_power_state attribute is only present
+		for device objects representing ACPI device nodes that provide
+		power management methods and use ACPI power resources for power
+		management.
+
+		If present, it contains a string representing the real ACPI
+		power state of the given device node as returned by the _PSC
+		control method or inferred from the configuration of power
+		resources.  Its possible values, "D0", "D1", "D2", "D3hot", and
+		"D3cold", reflect the power state names defined by the ACPI
+		specification (ACPI 4 and above).
+
+		In some situations the value of this attribute may be different
+		from the value of the /sys/devices/.../power_state attribute for
+		the same device object.  If that happens, some shared power
+		resources used by the device node are only ON because of some
+		other devices using them at the moment.
+
+		This attribute is read-only.
diff --git a/Documentation/ABI/testing/sysfs-devices-resource_in_use b/Documentation/ABI/testing/sysfs-devices-resource_in_use
new file mode 100644
index 000000000000..b4a3bc5922a3
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-resource_in_use
@@ -0,0 +1,12 @@
+What:		/sys/devices/.../resource_in_use
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../resource_in_use attribute is only present
+		for device objects representing ACPI power resources.
+
+		If present, it contains a number (0 or 1) representing the
+		current status of the given power resource (0 means that the
+		resource is not in use and therefore it has been turned off).
+
+		This attribute is read-only.
diff --git a/Documentation/ABI/testing/sysfs-devices-sun b/Documentation/ABI/testing/sysfs-devices-sun
new file mode 100644
index 000000000000..625ce4b63758
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-sun
@@ -0,0 +1,14 @@
+What:		/sys/devices/.../sun
+Date:		October 2012
+Contact:	Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
+Description:
+		The file contains a Slot-unique ID which provided by the _SUN
+		method in the ACPI namespace. The value is written in Advanced
+		Configuration and Power Interface Specification as follows:
+
+		"The _SUN value is required to be unique among the slots of
+		the same type. It is also recommended that this number match
+		the slot number printed on the physical slot whenever possible."
+
+		So reading the sysfs file, we can identify a physical position
+		of the slot in the system.
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index 6943133afcb8..468e4d48f884 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -67,20 +67,6 @@ Description:	Discover NUMA node a CPU belongs to
 		/sys/devices/system/cpu/cpu42/node2 -> ../../node/node2
 
 
-What:		/sys/devices/system/cpu/cpu#/node
-Date:		October 2009
-Contact:	Linux memory management mailing list <linux-mm@kvack.org>
-Description:	Discover NUMA node a CPU belongs to
-
-		When CONFIG_NUMA is enabled, a symbolic link that points
-		to the corresponding NUMA node directory.
-
-		For example, the following symlink is created for cpu42
-		in NUMA node 2:
-
-		/sys/devices/system/cpu/cpu42/node2 -> ../../node/node2
-
-
 What:		/sys/devices/system/cpu/cpu#/topology/core_id
 		/sys/devices/system/cpu/cpu#/topology/core_siblings
 		/sys/devices/system/cpu/cpu#/topology/core_siblings_list
@@ -158,6 +144,21 @@ Description:	Discover and change clock speed of CPUs
 		to learn how to control the knobs.
 
 
+What:		/sys/devices/system/cpu/cpu#/cpufreq/freqdomain_cpus
+Date:		June 2013
+Contact:	cpufreq@vger.kernel.org
+Description:	Discover CPUs in the same CPU frequency coordination domain
+
+		freqdomain_cpus is the list of CPUs (online+offline) that share
+		the same clock/freq domain (possibly at the hardware level).
+		That information may be hidden from the cpufreq core and the
+		value of related_cpus may be different from freqdomain_cpus. This
+		attribute is useful for user space DVFS controllers to get better
+		power/performance results for platforms using acpi-cpufreq.
+
+		This file is only present if the acpi-cpufreq driver is in use.
+
+
 What:		/sys/devices/system/cpu/cpu*/cache/index3/cache_disable_{0,1}
 Date:		August 2008
 KernelVersion:	2.6.27
@@ -187,3 +188,15 @@ Description:	Processor frequency boosting control
 		Boosting allows the CPU and the firmware to run at a frequency
 		beyound it's nominal limit.
 		More details can be found in Documentation/cpu-freq/boost.txt
+
+
+What:		/sys/devices/system/cpu/cpu#/crash_notes
+		/sys/devices/system/cpu/cpu#/crash_notes_size
+Date:		April 2013
+Contact:	kexec@lists.infradead.org
+Description:	address and size of the percpu note.
+
+		crash_notes: the physical address of the memory that holds the
+		note of cpu#.
+
+		crash_notes_size: size of the note of cpu#.
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku b/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku
index 189dc43891bf..c601d0f2ac46 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku
@@ -101,7 +101,8 @@ Date:		June 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	When written, this file lets one set the backlight intensity for
 		a specific profile. Profile number is included in written data.
-		The data has to be 10 bytes long.
+		The data has to be 10 bytes long for Isku, IskuFX needs	16 bytes
+		of data.
 		Before reading this file, control has to be written to select
 		which profile to read.
 Users:		http://roccat.sourceforge.net
@@ -117,6 +118,14 @@ Description:	When written, this file lets one store macros with max 500
 		which profile and key to read.
 Users:		http://roccat.sourceforge.net
 
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/reset
+Date:		November 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one reset the device.
+		The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/control
 Date:		June 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
@@ -133,3 +142,12 @@ Description:	When written, this file lets one trigger easyshift functionality
 		The data has to be 16 bytes long.
 		This file is writeonly.
 Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/talkfx
+Date:		February 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one trigger temporary color schemes
+		from the host.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
index 65e6e5dd67e8..7bd776f9c3c7 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
@@ -9,15 +9,12 @@ Description:	The integer value of this attribute ranges from 0-4.
 		and the mouse activates this profile immediately.
 Users:		http://roccat.sourceforge.net
 
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/firmware_version
-Date:		October 2010
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/info
+Date:		November 2012
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	When read, this file returns the raw integer version number of the
-		firmware reported by the mouse. Using the integer value eases
-		further usage in other programs. To receive the real version
-		number the decimal point has to be shifted 2 positions to the
-		left. E.g. a returned value of 121 means 1.21
-		This file is readonly.
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 8 bytes long.
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/macro
@@ -42,18 +39,8 @@ Description:	The mouse can store 5 profiles which can be switched by the
 		The mouse will reject invalid data.
 		Which profile to write is determined by the profile number
 		contained in the data.
-		This file is writeonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_buttons
-Date:		August 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store 5 profiles which can be switched by the
-		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds information about button layout.
-		When read, these files return the respective profile buttons.
-		The returned data is 77 bytes in size.
-		This file is readonly.
+		Before reading this file, control has to be written to select
+		which profile to read.
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_settings
@@ -68,19 +55,8 @@ Description:	The mouse can store 5 profiles which can be switched by the
 		The mouse will reject invalid data.
 		Which profile to write is determined by the profile number
 		contained in the data.
-		This file is writeonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_settings
-Date:		August 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store 5 profiles which can be switched by the
-		press of a button. A profile is split in settings and buttons.
-		profile_settings holds information like resolution, sensitivity
-		and light effects.
-		When read, these files return the respective profile settings.
-		The returned data is 43 bytes in size.
-		This file is readonly.
+		Before reading this file, control has to be written to select
+		which profile to read.
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/sensor
@@ -104,9 +80,9 @@ What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-
 Date:		October 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	When written a calibration process for the tracking control unit
-		can be initiated/cancelled.
-		The data has to be 3 bytes long.
-		This file is writeonly.
+		can be initiated/cancelled. Also lets one read/write sensor
+		registers.
+		The data has to be 4 bytes long.
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu_image
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-konepure b/Documentation/ABI/testing/sysfs-driver-hid-roccat-konepure
new file mode 100644
index 000000000000..41a9b7fbfc79
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-konepure
@@ -0,0 +1,105 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/actual_profile
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. actual_profile holds number of actual profile.
+		This value is persistent, so its value determines the profile
+		that's active when the mouse is powered on next time.
+		When written, the mouse activates the set profile immediately.
+		The data has to be 3 bytes long.
+		The mouse will reject invalid data.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/control
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one select which data from which
+		profile will be	read next. The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/info
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 6 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/macro
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store a macro with max 500 key/button strokes
+		internally.
+		When written, this file lets one set the sequence for a specific
+		button for a specific profile. Button and profile numbers are
+		included in written data. The data has to be 2082 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/profile_buttons
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When written, this file lets one write the respective profile
+		buttons back to the mouse. The data has to be 59 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/profile_settings
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 31 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/sensor
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse has a tracking- and a distance-control-unit. These
+		can be activated/deactivated and the lift-off distance can be
+		set. The data has to be 6 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/talk
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	Used to active some easy* functions of the mouse from outside.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/tcu
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written a calibration process for the tracking control unit
+		can be initiated/cancelled. Also lets one read/write sensor
+		registers.
+		The data has to be 4 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/tcu_image
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read the mouse returns a 30x30 pixel image of the
+		sampled underground. This works only in the course of a
+		calibration process initiated with tcu.
+		The returned data is 1028 bytes in size.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
index 20f937c9d84f..a10404f15a54 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
@@ -1,12 +1,3 @@
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_cpi
-Date:		January 2011
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The integer value of this attribute ranges from 1-4.
-		When read, this attribute returns the number of the active
-		cpi level.
-		This file is readonly.
-Users:		http://roccat.sourceforge.net
-
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_profile
 Date:		January 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
@@ -18,33 +9,12 @@ Description:	The integer value of this attribute ranges from 0-4.
 		active when the mouse is powered on.
 Users:		http://roccat.sourceforge.net
 
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_x
-Date:		January 2011
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/info
+Date:		November 2012
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The integer value of this attribute ranges from 1-10.
-		When read, this attribute returns the number of the actual
-		sensitivity in x direction.
-		This file is readonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_y
-Date:		January 2011
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The integer value of this attribute ranges from 1-10.
-		When read, this attribute returns the number of the actual
-		sensitivity in y direction.
-		This file is readonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/firmware_version
-Date:		January 2011
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	When read, this file returns the raw integer version number of the
-		firmware reported by the mouse. Using the integer value eases
-		further usage in other programs. To receive the real version
-		number the decimal point has to be shifted 2 positions to the
-		left. E.g. a returned value of 121 means 1.21
-		This file is readonly.
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 6 bytes long.
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_buttons
@@ -58,18 +28,8 @@ Description:	The mouse can store 5 profiles which can be switched by the
 		The mouse will reject invalid data.
 		Which profile to write is determined by the profile number
 		contained in the data.
-		This file is writeonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_buttons
-Date:		January 2011
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store 5 profiles which can be switched by the
-		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds information about button layout.
-		When read, these files return the respective profile buttons.
-		The returned data is 23 bytes in size.
-		This file is readonly.
+		Before reading this file, control has to be written to select
+		which profile to read.
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_settings
@@ -84,17 +44,6 @@ Description:	The mouse can store 5 profiles which can be switched by the
 		The mouse will reject invalid data.
 		Which profile to write is determined by the profile number
 		contained in the data.
-		This file is writeonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_settings
-Date:		January 2011
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store 5 profiles which can be switched by the
-		press of a button. A profile is split in settings and buttons.
-		profile_settings holds information like resolution, sensitivity
-		and light effects.
-		When read, these files return the respective profile settings.
-		The returned data is 16 bytes in size.
-		This file is readonly.
+		Before reading this file, control has to be written to select
+		which profile to read.
 Users:		http://roccat.sourceforge.net
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-lua b/Documentation/ABI/testing/sysfs-driver-hid-roccat-lua
new file mode 100644
index 000000000000..31c6c4c8ba2b
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-lua
@@ -0,0 +1,7 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/control
+Date:		October 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, cpi, button and light settings can be configured.
+		When read, actual cpi setting and sensor data are returned.
+		The data has to be 8 bytes long.
+Users:		http://roccat.sourceforge.net
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
index 3f8de50e4ff1..9fa9de30d14b 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
@@ -1,37 +1,9 @@
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_cpi
-Date:		August 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	It is possible to switch the cpi setting of the mouse with the
-		press of a button.
-		When read, this file returns the raw number of the actual cpi
-		setting reported by the mouse. This number has to be further
-		processed to receive the real dpi value.
-
-		VALUE DPI
-		1     400
-		2     800
-		4     1600
-
-		This file is readonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_profile
-Date:		August 2010
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/info
+Date:		November 2012
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	When read, this file returns the number of the actual profile in
-		range 0-4.
-		This file is readonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/firmware_version
-Date:		August 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	When read, this file returns the raw integer version number of the
-		firmware reported by the mouse. Using the integer value eases
-		further usage in other programs. To receive the real version
-		number the decimal point has to be shifted 2 positions to the
-		left. E.g. a returned value of 138 means 1.38
-		This file is readonly.
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 6 bytes long.
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_settings
@@ -46,19 +18,8 @@ Description:	The mouse can store 5 profiles which can be switched by the
 		The mouse will reject invalid data.
 		Which profile to write is determined by the profile number
 		contained in the data.
-		This file is writeonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_settings
-Date:		August 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store 5 profiles which can be switched by the
-		press of a button. A profile is split in settings and buttons.
-		profile_settings holds information like resolution, sensitivity
-		and light effects.
-		When read, these files return the respective profile settings.
-		The returned data is 13 bytes in size.
-		This file is readonly.
+		Before reading this file, control has to be written to select
+		which profile to read.
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_buttons
@@ -72,27 +33,8 @@ Description:	The mouse can store 5 profiles which can be switched by the
 		The mouse will reject invalid data.
 		Which profile to write is determined by the profile number
 		contained in the data.
-		This file is writeonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_buttons
-Date:		August 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store 5 profiles which can be switched by the
-		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds information about button layout.
-		When read, these files return the respective profile buttons.
-		The returned data is 19 bytes in size.
-		This file is readonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/startup_profile
-Date:		August 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The integer value of this attribute ranges from 0-4.
-                When read, this attribute returns the number of the profile
-                that's active when the mouse is powered on.
-		This file is readonly.
+		Before reading this file, control has to be written to select
+		which profile to read.
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/settings
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-savu b/Documentation/ABI/testing/sysfs-driver-hid-roccat-savu
index b42922cf6b1f..f1e02a98bd9d 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-savu
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-savu
@@ -40,8 +40,8 @@ What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-
 Date:		Mai 2012
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
 		The data is 8 bytes long.
-		This file is readonly.
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/macro
@@ -74,4 +74,3 @@ Description:	The mouse has a Avago ADNS-3090 sensor.
 		This file allows reading and writing of the mouse sensors registers.
 		The data has to be 4 bytes long.
 Users:		http://roccat.sourceforge.net
-
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-srws1 b/Documentation/ABI/testing/sysfs-driver-hid-srws1
new file mode 100644
index 000000000000..d0eba70c7d40
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-srws1
@@ -0,0 +1,21 @@
+What:		/sys/class/leds/SRWS1::<serial>::RPM1
+What:		/sys/class/leds/SRWS1::<serial>::RPM2
+What:		/sys/class/leds/SRWS1::<serial>::RPM3
+What:		/sys/class/leds/SRWS1::<serial>::RPM4
+What:		/sys/class/leds/SRWS1::<serial>::RPM5
+What:		/sys/class/leds/SRWS1::<serial>::RPM6
+What:		/sys/class/leds/SRWS1::<serial>::RPM7
+What:		/sys/class/leds/SRWS1::<serial>::RPM8
+What:		/sys/class/leds/SRWS1::<serial>::RPM9
+What:		/sys/class/leds/SRWS1::<serial>::RPM10
+What:		/sys/class/leds/SRWS1::<serial>::RPM11
+What:		/sys/class/leds/SRWS1::<serial>::RPM12
+What:		/sys/class/leds/SRWS1::<serial>::RPM13
+What:		/sys/class/leds/SRWS1::<serial>::RPM14
+What:		/sys/class/leds/SRWS1::<serial>::RPM15
+What:		/sys/class/leds/SRWS1::<serial>::RPMALL
+Date:		Jan 2013
+KernelVersion:	3.9
+Contact:	Simon Wood <simon@mungewell.org>
+Description:	Provides a control for turning on/off the LEDs which form
+		an RPM meter on the front of the controller
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-thingm b/Documentation/ABI/testing/sysfs-driver-hid-thingm
new file mode 100644
index 000000000000..abcffeedd20a
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-thingm
@@ -0,0 +1,23 @@
+What:		/sys/class/leds/blink1::<serial>/rgb
+Date:		January 2013
+Contact:	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+Description:	The ThingM blink1 is an USB RGB LED. The color notation is
+		3-byte hexadecimal. Read this attribute to get the last set
+		color. Write the 24-bit hexadecimal color to change the current
+		LED color. The default color is full white (0xFFFFFF).
+		For instance, set the color to green with: echo 00FF00 > rgb
+
+What:		/sys/class/leds/blink1::<serial>/fade
+Date:		January 2013
+Contact:	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+Description:	This attribute allows to set a fade time in milliseconds for
+		the next color change. Read the attribute to know the current
+		fade time. The default value is set to 0 (no fade time). For
+		instance, set a fade time of 2 seconds with: echo 2000 > fade
+
+What:		/sys/class/leds/blink1::<serial>/play
+Date:		January 2013
+Contact:	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+Description:	This attribute is used to play/pause the light patterns. Write 1
+		to start playing, 0 to stop. Reading this attribute returns the
+		current playing status.
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-wiimote b/Documentation/ABI/testing/sysfs-driver-hid-wiimote
index 3d98009f447a..ed5dd567d397 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-wiimote
+++ b/Documentation/ABI/testing/sysfs-driver-hid-wiimote
@@ -12,7 +12,7 @@ Description:	Make it possible to set/get current led state. Reading from it
 What:		/sys/bus/hid/drivers/wiimote/<dev>/extension
 Date:		August 2011
 KernelVersion:	3.2
-Contact:	David Herrmann <dh.herrmann@googlemail.com>
+Contact:	David Herrmann <dh.herrmann@gmail.com>
 Description:	This file contains the currently connected and initialized
 		extensions. It can be one of: none, motionp, nunchuck, classic,
 		motionp+nunchuck, motionp+classic
@@ -20,3 +20,40 @@ Description:	This file contains the currently connected and initialized
 		the official Nintendo Nunchuck extension and classic is the
 		Nintendo Classic Controller extension. The motionp extension can
 		be combined with the other two.
+		Starting with kernel-version 3.11 Motion Plus hotplugging is
+		supported and if detected, it's no longer reported as static
+		extension. You will get uevent notifications for the motion-plus
+		device then.
+
+What:		/sys/bus/hid/drivers/wiimote/<dev>/devtype
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	David Herrmann <dh.herrmann@gmail.com>
+Description:	While a device is initialized by the wiimote driver, we perform
+		a device detection and signal a "change" uevent after it is
+		done. This file shows the detected device type. "pending" means
+		that the detection is still ongoing, "unknown" means, that the
+		device couldn't be detected or loaded. "generic" means, that the
+		device couldn't be detected but supports basic Wii Remote
+		features and can be used.
+		Other strings for each device-type are available and may be
+		added if new device-specific detections are added.
+		Currently supported are:
+			gen10: First Wii Remote generation
+			gen20: Second Wii Remote Plus generation (builtin MP)
+			balanceboard: Wii Balance Board
+
+What:		/sys/bus/hid/drivers/wiimote/<dev>/bboard_calib
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	David Herrmann <dh.herrmann@gmail.com>
+Description:	This attribute is only provided if the device was detected as a
+		balance board. It provides a single line with 3 calibration
+		values for all 4 sensors. The values are separated by colons and
+		are each 2 bytes long (encoded as 4 digit hexadecimal value).
+		First, 0kg values for all 4 sensors are written, followed by the
+		17kg values for all 4 sensors and last the 34kg values for all 4
+		sensors.
+		Calibration data is already applied by the kernel to all input
+		values but may be used by user-space to perform other
+		transformations.
diff --git a/Documentation/ABI/testing/sysfs-driver-intel-rapid-start b/Documentation/ABI/testing/sysfs-driver-intel-rapid-start
new file mode 100644
index 000000000000..5a7d2e217d40
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-intel-rapid-start
@@ -0,0 +1,21 @@
+What:		/sys/bus/acpi/intel-rapid-start/wakeup_events
+Date:		July 2, 2013
+KernelVersion:	3.11
+Contact:	Matthew Garrett <mjg59@srcf.ucam.org>
+Description:	An integer representing a set of wakeup events as follows:
+		1: Wake to enter hibernation when the wakeup timer expires
+		2: Wake to enter hibernation when the battery reaches a
+		critical level
+
+		These values are ORed together. For example, a value of 3
+		indicates that the system will wake to enter hibernation when
+		either the wakeup timer expires or the battery reaches a
+		critical level.
+
+What:		/sys/bus/acpi/intel-rapid-start/wakeup_time
+Date:		July 2, 2013
+KernelVersion:	3.11
+Contact:	Matthew Garrett <mjg59@srcf.ucam.org>
+Description:	An integer representing the length of time the system will
+		remain asleep before waking up to enter hibernation.
+		This value is in minutes.
diff --git a/Documentation/ABI/testing/sysfs-driver-ppi b/Documentation/ABI/testing/sysfs-driver-ppi
index 97a003ee058b..7d1435bc976c 100644
--- a/Documentation/ABI/testing/sysfs-driver-ppi
+++ b/Documentation/ABI/testing/sysfs-driver-ppi
@@ -5,7 +5,7 @@ Contact:	xiaoyan.zhang@intel.com
 Description:
 		This folder includes the attributes related with PPI (Physical
 		Presence Interface). Only if TPM is supported by BIOS, this
-		folder makes sence. The folder path can be got by command
+		folder makes sense. The folder path can be got by command
 		'find /sys/ -name 'pcrs''. For the detail information of PPI,
 		please refer to the PPI specification from
 		http://www.trustedcomputinggroup.org/
diff --git a/Documentation/ABI/testing/sysfs-driver-xen-blkback b/Documentation/ABI/testing/sysfs-driver-xen-blkback
new file mode 100644
index 000000000000..8bb43b66eb55
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-xen-blkback
@@ -0,0 +1,17 @@
+What:           /sys/module/xen_blkback/parameters/max_buffer_pages
+Date:           March 2013
+KernelVersion:  3.11
+Contact:        Roger Pau Monné <roger.pau@citrix.com>
+Description:
+                Maximum number of free pages to keep in each block
+                backend buffer.
+
+What:           /sys/module/xen_blkback/parameters/max_persistent_grants
+Date:           March 2013
+KernelVersion:  3.11
+Contact:        Roger Pau Monné <roger.pau@citrix.com>
+Description:
+                Maximum number of grants to map persistently in
+                blkback. If the frontend tries to use more than
+                max_persistent_grants, the LRU kicks in and starts
+                removing 5% of max_persistent_grants every 100ms.
diff --git a/Documentation/ABI/testing/sysfs-driver-xen-blkfront b/Documentation/ABI/testing/sysfs-driver-xen-blkfront
new file mode 100644
index 000000000000..c0a6cb7eb314
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-xen-blkfront
@@ -0,0 +1,10 @@
+What:           /sys/module/xen_blkfront/parameters/max
+Date:           June 2013
+KernelVersion:  3.11
+Contact:        Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Maximum number of segments that the frontend will negotiate
+                with the backend for indirect descriptors. The default value
+                is 32 - higher value means more potential throughput but more
+                memory usage. The backend picks the minimum of the frontend
+                and its default backend value.
diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi
index dd930c8db41f..b4436cca97a8 100644
--- a/Documentation/ABI/testing/sysfs-firmware-acpi
+++ b/Documentation/ABI/testing/sysfs-firmware-acpi
@@ -18,6 +18,42 @@ Description:
 		yoffset: The number of pixels between the top of the screen
 			 and the top edge of the image.
 
+What:		/sys/firmware/acpi/hotplug/
+Date:		February 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		There are separate hotplug profiles for different classes of
+		devices supported by ACPI, such as containers, memory modules,
+		processors, PCI root bridges etc.  A hotplug profile for a given
+		class of devices is a collection of settings defining the way
+		that class of devices will be handled by the ACPI core hotplug
+		code.  Those profiles are represented in sysfs as subdirectories
+		of /sys/firmware/acpi/hotplug/.
+
+		The following setting is available to user space for each
+		hotplug profile:
+
+		enabled: If set, the ACPI core will handle notifications of
+			hotplug events associated with the given class of
+			devices and will allow those devices to be ejected with
+			the help of the _EJ0 control method.  Unsetting it
+			effectively disables hotplug for the correspoinding
+			class of devices.
+
+		The value of the above attribute is an integer number: 1 (set)
+		or 0 (unset).  Attempts to write any other values to it will
+		cause -EINVAL to be returned.
+
+What:		/sys/firmware/acpi/hotplug/force_remove
+Date:		May 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The number in this file (0 or 1) determines whether (1) or not
+		(0) the ACPI subsystem will allow devices to be hot-removed even
+		if they cannot be put offline gracefully (from the kernel's
+		viewpoint).  That number can be changed by writing a boolean
+		value to this file.
+
 What:		/sys/firmware/acpi/interrupts/
 Date:		February 2008
 Contact:	Len Brown <lenb@kernel.org>
diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs
new file mode 100644
index 000000000000..31942efcaf0e
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -0,0 +1,26 @@
+What:		/sys/fs/f2fs/<disk>/gc_max_sleep_time
+Date:		July 2013
+Contact:	"Namjae Jeon" <namjae.jeon@samsung.com>
+Description:
+		 Controls the maximun sleep time for gc_thread. Time
+		 is in milliseconds.
+
+What:		/sys/fs/f2fs/<disk>/gc_min_sleep_time
+Date:		July 2013
+Contact:	"Namjae Jeon" <namjae.jeon@samsung.com>
+Description:
+		 Controls the minimum sleep time for gc_thread. Time
+		 is in milliseconds.
+
+What:		/sys/fs/f2fs/<disk>/gc_no_gc_sleep_time
+Date:		July 2013
+Contact:	"Namjae Jeon" <namjae.jeon@samsung.com>
+Description:
+		 Controls the default sleep time for gc_thread. Time
+		 is in milliseconds.
+
+What:		/sys/fs/f2fs/<disk>/gc_idle
+Date:		July 2013
+Contact:	"Namjae Jeon" <namjae.jeon@samsung.com>
+Description:
+		 Controls the victim selection policy for garbage collection.
diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-ksm b/Documentation/ABI/testing/sysfs-kernel-mm-ksm
new file mode 100644
index 000000000000..73e653ee2481
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-mm-ksm
@@ -0,0 +1,52 @@
+What:		/sys/kernel/mm/ksm
+Date:		September 2009
+KernelVersion:	2.6.32
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Interface for Kernel Samepage Merging (KSM)
+
+What:		/sys/kernel/mm/ksm/full_scans
+What:		/sys/kernel/mm/ksm/pages_shared
+What:		/sys/kernel/mm/ksm/pages_sharing
+What:		/sys/kernel/mm/ksm/pages_to_scan
+What:		/sys/kernel/mm/ksm/pages_unshared
+What:		/sys/kernel/mm/ksm/pages_volatile
+What:		/sys/kernel/mm/ksm/run
+What:		/sys/kernel/mm/ksm/sleep_millisecs
+Date:		September 2009
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Kernel Samepage Merging daemon sysfs interface
+
+		full_scans: how many times all mergeable areas have been
+		scanned.
+
+		pages_shared: how many shared pages are being used.
+
+		pages_sharing: how many more sites are sharing them i.e. how
+		much saved.
+
+		pages_to_scan: how many present pages to scan before ksmd goes
+		to sleep.
+
+		pages_unshared: how many pages unique but repeatedly checked
+		for merging.
+
+		pages_volatile: how many pages changing too fast to be placed
+		in a tree.
+
+		run: write 0 to disable ksm, read 0 while ksm is disabled.
+			write 1 to run ksm, read 1 while ksm is running.
+			write 2 to disable ksm and unmerge all its pages.
+
+		sleep_millisecs: how many milliseconds ksm should sleep between
+		scans.
+
+		See Documentation/vm/ksm.txt for more information.
+
+What:		/sys/kernel/mm/ksm/merge_across_nodes
+Date:		January 2013
+KernelVersion:	3.9
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Control merging pages across different NUMA nodes.
+
+		When it is set to 0 only pages from the same node are merged,
+		otherwise pages from all nodes can be merged together (default).
diff --git a/Documentation/ABI/testing/sysfs-platform-msi-laptop b/Documentation/ABI/testing/sysfs-platform-msi-laptop
new file mode 100644
index 000000000000..307a247ba1ef
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-msi-laptop
@@ -0,0 +1,83 @@
+What:		/sys/devices/platform/msi-laptop-pf/lcd_level
+Date:		Oct 2006
+KernelVersion:	2.6.19
+Contact:	"Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+		Screen brightness: contains a single integer in the range 0..8.
+
+What:		/sys/devices/platform/msi-laptop-pf/auto_brightness
+Date:		Oct 2006
+KernelVersion:	2.6.19
+Contact:	"Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+		Enable automatic brightness control: contains either 0 or 1. If
+		set to 1 the hardware adjusts the screen brightness
+		automatically when the power cord is plugged/unplugged.
+
+What:		/sys/devices/platform/msi-laptop-pf/wlan
+Date:		Oct 2006
+KernelVersion:	2.6.19
+Contact:	"Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+		WLAN subsystem enabled: contains either 0 or 1.
+
+What:		/sys/devices/platform/msi-laptop-pf/bluetooth
+Date:		Oct 2006
+KernelVersion:	2.6.19
+Contact:	"Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+		Bluetooth subsystem enabled: contains either 0 or 1. Please
+		note that this file is constantly 0 if no Bluetooth hardware is
+		available.
+
+What:		/sys/devices/platform/msi-laptop-pf/touchpad
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains either 0 or 1 and indicates if touchpad is turned on.
+		Touchpad state can only be toggled by pressing Fn+F3.
+
+What:		/sys/devices/platform/msi-laptop-pf/turbo_mode
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains either 0 or 1 and indicates if turbo mode is turned
+		on. In turbo mode power LED is orange and processor is
+		overclocked. Turbo mode is available only if charging. It is
+		only possible to toggle turbo mode state by pressing Fn+F10,
+		and there is a few seconds cooldown between subsequent toggles.
+		If user presses Fn+F10 too frequent, turbo mode state is not
+		changed.
+
+What:		/sys/devices/platform/msi-laptop-pf/eco_mode
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains either 0 or 1 and indicates if ECO mode is turned on.
+		In ECO mode power LED is green and userspace should do some
+		powersaving actions. ECO mode is available only on battery
+		power. ECO mode can only be toggled by pressing Fn+F10.
+
+What:		/sys/devices/platform/msi-laptop-pf/turbo_cooldown
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains value in range 0..3:
+			* 0 -> Turbo mode is off
+			* 1 -> Turbo mode is on, cannot be turned off yet
+			* 2 -> Turbo mode is off, cannot be turned on yet
+			* 3 -> Turbo mode is on
+
+What:		/sys/devices/platform/msi-laptop-pf/auto_fan
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains either 0 or 1 and indicates if fan speed is controlled
+		automatically (1) or fan runs at maximal speed (0). Can be
+		toggled in software.
+
diff --git a/Documentation/ABI/testing/sysfs-platform-ts5500 b/Documentation/ABI/testing/sysfs-platform-ts5500
new file mode 100644
index 000000000000..c88375a537a1
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-ts5500
@@ -0,0 +1,47 @@
+What:		/sys/devices/platform/ts5500/adc
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Indicates the presence of an A/D Converter. If it is present,
+		it will display "1", otherwise "0".
+
+What:		/sys/devices/platform/ts5500/ereset
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Indicates the presence of an external reset. If it is present,
+		it will display "1", otherwise "0".
+
+What:		/sys/devices/platform/ts5500/id
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Product ID of the TS board. TS-5500 ID is 0x60.
+
+What:		/sys/devices/platform/ts5500/jumpers
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Bitfield showing the jumpers' state. If a jumper is present,
+		the corresponding bit is set. For instance, 0x0e means jumpers
+		2, 3 and 4 are set.
+
+What:		/sys/devices/platform/ts5500/rs485
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Indicates the presence of the RS485 option. If it is present,
+		it will display "1", otherwise "0".
+
+What:		/sys/devices/platform/ts5500/sram
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Indicates the presence of the SRAM option. If it is present,
+		it will display "1", otherwise "0".
diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power
index 217772615d02..205a73878441 100644
--- a/Documentation/ABI/testing/sysfs-power
+++ b/Documentation/ABI/testing/sysfs-power
@@ -1,6 +1,6 @@
 What:		/sys/power/
 Date:		August 2006
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power directory will contain files that will
 		provide a unified interface to the power management
@@ -8,7 +8,7 @@ Description:
 
 What:		/sys/power/state
 Date:		August 2006
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/state file controls the system power state.
 		Reading from this file returns what states are supported,
@@ -22,7 +22,7 @@ Description:
 
 What:		/sys/power/disk
 Date:		September 2006
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/disk file controls the operating mode of the
 		suspend-to-disk mechanism.  Reading from this file returns
@@ -67,7 +67,7 @@ Description:
 
 What:		/sys/power/image_size
 Date:		August 2006
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/image_size file controls the size of the image
 		created by the suspend-to-disk mechanism.  It can be written a
@@ -84,7 +84,7 @@ Description:
 
 What:		/sys/power/pm_trace
 Date:		August 2006
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/pm_trace file controls the code which saves the
 		last PM event point in the RTC across reboots, so that you can
@@ -133,7 +133,7 @@ Description:
 
 What:		/sys/power/pm_async
 Date:		January 2009
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/pm_async file controls the switch allowing the
 		user space to enable or disable asynchronous suspend and resume
@@ -146,7 +146,7 @@ Description:
 
 What:		/sys/power/wakeup_count
 Date:		July 2010
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/wakeup_count file allows user space to put the
 		system into a sleep state while taking into account the
@@ -161,7 +161,7 @@ Description:
 
 What:		/sys/power/reserved_size
 Date:		May 2011
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/reserved_size file allows user space to control
 		the amount of memory reserved for allocations made by device
@@ -175,7 +175,7 @@ Description:
 
 What:		/sys/power/autosleep
 Date:		April 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/autosleep file can be written one of the strings
 		returned by reads from /sys/power/state.  If that happens, a
@@ -192,7 +192,7 @@ Description:
 
 What:		/sys/power/wake_lock
 Date:		February 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/wake_lock file allows user space to create
 		wakeup source objects and activate them on demand (if one of
@@ -219,7 +219,7 @@ Description:
 
 What:		/sys/power/wake_unlock
 Date:		February 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/wake_unlock file allows user space to deactivate
 		wakeup sources created with the help of /sys/power/wake_lock.
diff --git a/Documentation/ABI/testing/sysfs-profiling b/Documentation/ABI/testing/sysfs-profiling
index b02d8b8c173a..8a8e466eb2c0 100644
--- a/Documentation/ABI/testing/sysfs-profiling
+++ b/Documentation/ABI/testing/sysfs-profiling
@@ -1,13 +1,13 @@
-What:		/sys/kernel/profile
+What:		/sys/kernel/profiling
 Date:		September 2008
 Contact:	Dave Hansen <dave@linux.vnet.ibm.com>
 Description:
-		/sys/kernel/profile is the runtime equivalent
+		/sys/kernel/profiling is the runtime equivalent
 		of the boot-time profile= option.
 
 		You can get the same effect running:
 
-			echo 2 > /sys/kernel/profile
+			echo 2 > /sys/kernel/profiling
 
 		as you would by issuing profile=2 on the boot
 		command line.
diff --git a/Documentation/ABI/testing/sysfs-tty b/Documentation/ABI/testing/sysfs-tty
index 0c430150d929..ad22fb0ee765 100644
--- a/Documentation/ABI/testing/sysfs-tty
+++ b/Documentation/ABI/testing/sysfs-tty
@@ -26,3 +26,115 @@ Description:
 		 UART port in serial_core, that is bound to TTY like ttyS0.
 		 uartclk = 16 * baud_base
 
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/type
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Shows the current tty type for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/line
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Shows the current tty line number for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/port
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Shows the current tty port I/O address for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/irq
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Shows the current primary interrupt for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/flags
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the tty port status flags for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/xmit_fifo_size
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the transmit FIFO size for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/close_delay
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the closing delay time for this port in ms.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/closing_wait
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the close wait time for this port in ms.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/custom_divisor
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the custom divisor if any that is set on this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/io_type
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the I/O type that is to be used with the iomem base
+		 address.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/iomem_base
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 The I/O memory base for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/iomem_reg_shift
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the register shift indicating the spacing to be used
+		 for accesses on this iomem address.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
index 495e5ba1634c..7fe0546c504a 100644
--- a/Documentation/CodingStyle
+++ b/Documentation/CodingStyle
@@ -389,7 +389,8 @@ Albeit deprecated by some people, the equivalent of the goto statement is
 used frequently by compilers in form of the unconditional jump instruction.
 
 The goto statement comes in handy when a function exits from multiple
-locations and some common work such as cleanup has to be done.
+locations and some common work such as cleanup has to be done.  If there is no
+cleanup needed then just return directly.
 
 The rationale is:
 
@@ -546,15 +547,7 @@ config AUDIT
 	  logging of avc messages output).  Does not do system-call
 	  auditing without CONFIG_AUDITSYSCALL.
 
-Features that might still be considered unstable should be defined as
-dependent on "EXPERIMENTAL":
-
-config SLUB
-	depends on EXPERIMENTAL && !ARCH_USES_SLAB_PAGE_STRUCT
-	bool "SLUB (Unqueued Allocator)"
-	...
-
-while seriously dangerous features (such as write support for certain
+Seriously dangerous features (such as write support for certain
 filesystems) should advertise this prominently in their prompt string:
 
 config ADFS_FS_RW
diff --git a/Documentation/DMA-API-HOWTO.txt b/Documentation/DMA-API-HOWTO.txt
index a0b6250add79..14129f149a75 100644
--- a/Documentation/DMA-API-HOWTO.txt
+++ b/Documentation/DMA-API-HOWTO.txt
@@ -468,11 +468,47 @@ To map a single region, you do:
 	size_t size = buffer->len;
 
 	dma_handle = dma_map_single(dev, addr, size, direction);
+	if (dma_mapping_error(dma_handle)) {
+		/*
+		 * reduce current DMA mapping usage,
+		 * delay and try again later or
+		 * reset driver.
+		 */
+		goto map_error_handling;
+	}
 
 and to unmap it:
 
 	dma_unmap_single(dev, dma_handle, size, direction);
 
+You should call dma_mapping_error() as dma_map_single() could fail and return
+error. Not all dma implementations support dma_mapping_error() interface.
+However, it is a good practice to call dma_mapping_error() interface, which
+will invoke the generic mapping error check interface. Doing so will ensure
+that the mapping code will work correctly on all dma implementations without
+any dependency on the specifics of the underlying implementation. Using the
+returned address without checking for errors could result in failures ranging
+from panics to silent data corruption. A couple of examples of incorrect ways
+to check for errors that make assumptions about the underlying dma
+implementation are as follows and these are applicable to dma_map_page() as
+well.
+
+Incorrect example 1:
+	dma_addr_t dma_handle;
+
+	dma_handle = dma_map_single(dev, addr, size, direction);
+	if ((dma_handle & 0xffff != 0) || (dma_handle >= 0x1000000)) {
+		goto map_error;
+	}
+
+Incorrect example 2:
+	dma_addr_t dma_handle;
+
+	dma_handle = dma_map_single(dev, addr, size, direction);
+	if (dma_handle == DMA_ERROR_CODE) {
+		goto map_error;
+	}
+
 You should call dma_unmap_single when the DMA activity is finished, e.g.
 from the interrupt which told you that the DMA transfer is done.
 
@@ -489,6 +525,14 @@ Specifically:
 	size_t size = buffer->len;
 
 	dma_handle = dma_map_page(dev, page, offset, size, direction);
+	if (dma_mapping_error(dma_handle)) {
+		/*
+		 * reduce current DMA mapping usage,
+		 * delay and try again later or
+		 * reset driver.
+		 */
+		goto map_error_handling;
+	}
 
 	...
 
@@ -496,6 +540,12 @@ Specifically:
 
 Here, "offset" means byte offset within the given page.
 
+You should call dma_mapping_error() as dma_map_page() could fail and return
+error as outlined under the dma_map_single() discussion.
+
+You should call dma_unmap_page when the DMA activity is finished, e.g.
+from the interrupt which told you that the DMA transfer is done.
+
 With scatterlists, you map a region gathered from several regions by:
 
 	int i, count = dma_map_sg(dev, sglist, nents, direction);
@@ -578,6 +628,14 @@ to use the dma_sync_*() interfaces.
 		dma_addr_t mapping;
 
 		mapping = dma_map_single(cp->dev, buffer, len, DMA_FROM_DEVICE);
+		if (dma_mapping_error(dma_handle)) {
+			/*
+			 * reduce current DMA mapping usage,
+			 * delay and try again later or
+			 * reset driver.
+			 */
+			goto map_error_handling;
+		}
 
 		cp->rx_buf = buffer;
 		cp->rx_len = len;
@@ -658,6 +716,75 @@ failure can be determined by:
 		 * delay and try again later or
 		 * reset driver.
 		 */
+		goto map_error_handling;
+	}
+
+- unmap pages that are already mapped, when mapping error occurs in the middle
+  of a multiple page mapping attempt. These example are applicable to
+  dma_map_page() as well.
+
+Example 1:
+	dma_addr_t dma_handle1;
+	dma_addr_t dma_handle2;
+
+	dma_handle1 = dma_map_single(dev, addr, size, direction);
+	if (dma_mapping_error(dev, dma_handle1)) {
+		/*
+		 * reduce current DMA mapping usage,
+		 * delay and try again later or
+		 * reset driver.
+		 */
+		goto map_error_handling1;
+	}
+	dma_handle2 = dma_map_single(dev, addr, size, direction);
+	if (dma_mapping_error(dev, dma_handle2)) {
+		/*
+		 * reduce current DMA mapping usage,
+		 * delay and try again later or
+		 * reset driver.
+		 */
+		goto map_error_handling2;
+	}
+
+	...
+
+	map_error_handling2:
+		dma_unmap_single(dma_handle1);
+	map_error_handling1:
+
+Example 2: (if buffers are allocated in a loop, unmap all mapped buffers when
+	    mapping error is detected in the middle)
+
+	dma_addr_t dma_addr;
+	dma_addr_t array[DMA_BUFFERS];
+	int save_index = 0;
+
+	for (i = 0; i < DMA_BUFFERS; i++) {
+
+		...
+
+		dma_addr = dma_map_single(dev, addr, size, direction);
+		if (dma_mapping_error(dev, dma_addr)) {
+			/*
+			 * reduce current DMA mapping usage,
+			 * delay and try again later or
+			 * reset driver.
+			 */
+			goto map_error_handling;
+		}
+		array[i].dma_addr = dma_addr;
+		save_index++;
+	}
+
+	...
+
+	map_error_handling:
+
+	for (i = 0; i < save_index; i++) {
+
+		...
+
+		dma_unmap_single(array[i].dma_addr);
 	}
 
 Networking drivers must call dev_kfree_skb to free the socket buffer
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index 66bd97a95f10..78a6c569d204 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -678,3 +678,15 @@ out of dma_debug_entries. These entries are preallocated at boot. The number
 of preallocated entries is defined per architecture. If it is too low for you
 boot with 'dma_debug_entries=<your_desired_number>' to overwrite the
 architectural default.
+
+void debug_dmap_mapping_error(struct device *dev, dma_addr_t dma_addr);
+
+dma-debug interface debug_dma_mapping_error() to debug drivers that fail
+to check dma mapping errors on addresses returned by dma_map_single() and
+dma_map_page() interfaces. This interface clears a flag set by
+debug_dma_map_page() to indicate that dma_mapping_error() has been called by
+the driver. When driver does unmap, debug_dma_unmap() checks the flag and if
+this flag is still set, prints warning message that includes call trace that
+leads up to the unmap. This interface can be called from dma_mapping_error()
+routines to enable dma mapping error check debugging.
+
diff --git a/Documentation/DMA-attributes.txt b/Documentation/DMA-attributes.txt
index f50309081ac7..e59480db9ee0 100644
--- a/Documentation/DMA-attributes.txt
+++ b/Documentation/DMA-attributes.txt
@@ -91,3 +91,12 @@ transferred to 'device' domain. This attribute can be also used for
 dma_unmap_{single,page,sg} functions family to force buffer to stay in
 device domain after releasing a mapping for it. Use this attribute with
 care!
+
+DMA_ATTR_FORCE_CONTIGUOUS
+-------------------------
+
+By default DMA-mapping subsystem is allowed to assemble the buffer
+allocated by dma_alloc_attrs() function from individual pages if it can
+be mapped as contiguous chunk into device dma address space. By
+specifing this attribute the allocated buffer is forced to be contiguous
+also in physical memory.
diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl
index 42e7f030cb16..f403ec3c5c9a 100644
--- a/Documentation/DocBook/80211.tmpl
+++ b/Documentation/DocBook/80211.tmpl
@@ -107,8 +107,8 @@
 !Finclude/net/cfg80211.h key_params
 !Finclude/net/cfg80211.h survey_info_flags
 !Finclude/net/cfg80211.h survey_info
-!Finclude/net/cfg80211.h beacon_parameters
-!Finclude/net/cfg80211.h plink_actions
+!Finclude/net/cfg80211.h cfg80211_beacon_data
+!Finclude/net/cfg80211.h cfg80211_ap_settings
 !Finclude/net/cfg80211.h station_parameters
 !Finclude/net/cfg80211.h station_info_flags
 !Finclude/net/cfg80211.h rate_info_flags
@@ -127,14 +127,11 @@
 !Finclude/net/cfg80211.h cfg80211_ibss_params
 !Finclude/net/cfg80211.h cfg80211_connect_params
 !Finclude/net/cfg80211.h cfg80211_pmksa
-!Finclude/net/cfg80211.h cfg80211_send_rx_auth
-!Finclude/net/cfg80211.h cfg80211_send_auth_timeout
-!Finclude/net/cfg80211.h cfg80211_send_rx_assoc
-!Finclude/net/cfg80211.h cfg80211_send_assoc_timeout
-!Finclude/net/cfg80211.h cfg80211_send_deauth
-!Finclude/net/cfg80211.h __cfg80211_send_deauth
-!Finclude/net/cfg80211.h cfg80211_send_disassoc
-!Finclude/net/cfg80211.h __cfg80211_send_disassoc
+!Finclude/net/cfg80211.h cfg80211_rx_mlme_mgmt
+!Finclude/net/cfg80211.h cfg80211_auth_timeout
+!Finclude/net/cfg80211.h cfg80211_rx_assoc_resp
+!Finclude/net/cfg80211.h cfg80211_assoc_timeout
+!Finclude/net/cfg80211.h cfg80211_tx_mlme_mgmt
 !Finclude/net/cfg80211.h cfg80211_ibss_joined
 !Finclude/net/cfg80211.h cfg80211_connect_result
 !Finclude/net/cfg80211.h cfg80211_roamed
@@ -328,6 +325,7 @@
           <title>functions/definitions</title>
 !Finclude/net/mac80211.h ieee80211_rx_status
 !Finclude/net/mac80211.h mac80211_rx_flags
+!Finclude/net/mac80211.h mac80211_tx_info_flags
 !Finclude/net/mac80211.h mac80211_tx_control_flags
 !Finclude/net/mac80211.h mac80211_rate_control_flags
 !Finclude/net/mac80211.h ieee80211_tx_rate
@@ -437,7 +435,7 @@
       </section>
 !Finclude/net/mac80211.h ieee80211_get_buffered_bc
 !Finclude/net/mac80211.h ieee80211_beacon_get
-!Finclude/net/mac80211.h ieee80211_sta_eosp_irqsafe
+!Finclude/net/mac80211.h ieee80211_sta_eosp
 !Finclude/net/mac80211.h ieee80211_frame_release_type
 !Finclude/net/mac80211.h ieee80211_sta_ps_transition
 !Finclude/net/mac80211.h ieee80211_sta_ps_transition_ni
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index 7514dbf0a679..fe397f90a34f 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -84,7 +84,7 @@ X!Iinclude/linux/kobject.h
 
      <sect1><title>Kernel utility functions</title>
 !Iinclude/linux/kernel.h
-!Ekernel/printk.c
+!Ekernel/printk/printk.c
 !Ekernel/panic.c
 !Ekernel/sys.c
 !Ekernel/rcupdate.c
@@ -126,6 +126,8 @@ X!Edrivers/base/interface.c
      </sect1>
      <sect1><title>Device Drivers DMA Management</title>
 !Edrivers/base/dma-buf.c
+!Edrivers/base/reservation.c
+!Iinclude/linux/reservation.h
 !Edrivers/base/dma-coherent.c
 !Edrivers/base/dma-mapping.c
      </sect1>
@@ -227,7 +229,7 @@ X!Isound/sound_firmware.c
   <chapter id="uart16x50">
      <title>16x50 UART Driver</title>
 !Edrivers/tty/serial/serial_core.c
-!Edrivers/tty/serial/8250/8250.c
+!Edrivers/tty/serial/8250/8250_core.c
   </chapter>
 
   <chapter id="fbdev">
@@ -297,10 +299,10 @@ KAO -->
      </sect1>
      <sect1><title>Frame Buffer Fonts</title>
         <para>
-           Refer to the file drivers/video/console/fonts.c for more information.
+           Refer to the file lib/fonts/fonts.c for more information.
         </para>
 <!-- FIXME: Removed for now since no structured comments in source
-X!Idrivers/video/console/fonts.c
+X!Ilib/fonts/fonts.c
 -->
      </sect1>
   </chapter>
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index b0300529ab13..ed1d6d289022 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -156,13 +156,6 @@
             </para></listitem>
           </varlistentry>
           <varlistentry>
-            <term>DRIVER_USE_MTRR</term>
-            <listitem><para>
-              Driver uses MTRR interface for mapping memory, the DRM core will
-              manage MTRR resources. Deprecated.
-            </para></listitem>
-          </varlistentry>
-          <varlistentry>
             <term>DRIVER_PCI_DMA</term>
             <listitem><para>
               Driver is capable of PCI DMA, mapping of PCI DMA buffers to
@@ -186,36 +179,15 @@
           <varlistentry>
             <term>DRIVER_HAVE_IRQ</term><term>DRIVER_IRQ_SHARED</term>
             <listitem><para>
-              DRIVER_HAVE_IRQ indicates whether the driver has an IRQ handler. The
-              DRM core will automatically register an interrupt handler when the
-              flag is set. DRIVER_IRQ_SHARED indicates whether the device &amp;
-              handler support shared IRQs (note that this is required of PCI
-              drivers).
-            </para></listitem>
-          </varlistentry>
-          <varlistentry>
-            <term>DRIVER_IRQ_VBL</term>
-            <listitem><para>Unused. Deprecated.</para></listitem>
-          </varlistentry>
-          <varlistentry>
-            <term>DRIVER_DMA_QUEUE</term>
-            <listitem><para>
-              Should be set if the driver queues DMA requests and completes them
-              asynchronously.  Deprecated.
+              DRIVER_HAVE_IRQ indicates whether the driver has an IRQ handler
+              managed by the DRM Core. The core will support simple IRQ handler
+              installation when the flag is set. The installation process is
+              described in <xref linkend="drm-irq-registration"/>.</para>
+              <para>DRIVER_IRQ_SHARED indicates whether the device &amp; handler
+              support shared IRQs (note that this is required of PCI  drivers).
             </para></listitem>
           </varlistentry>
           <varlistentry>
-            <term>DRIVER_FB_DMA</term>
-            <listitem><para>
-              Driver supports DMA to/from the framebuffer, mapping of frambuffer
-              DMA buffers to userspace will be supported. Deprecated.
-            </para></listitem>
-          </varlistentry>
-          <varlistentry>
-            <term>DRIVER_IRQ_VBL2</term>
-            <listitem><para>Unused. Deprecated.</para></listitem>
-          </varlistentry>
-          <varlistentry>
             <term>DRIVER_GEM</term>
             <listitem><para>
               Driver use the GEM memory manager.
@@ -233,6 +205,12 @@
               Driver implements DRM PRIME buffer sharing.
             </para></listitem>
           </varlistentry>
+          <varlistentry>
+            <term>DRIVER_RENDER</term>
+            <listitem><para>
+              Driver supports dedicated render nodes.
+            </para></listitem>
+          </varlistentry>
         </variablelist>
       </sect3>
       <sect3>
@@ -344,50 +322,71 @@ char *date;</synopsis>
           The DRM core tries to facilitate IRQ handler registration and
           unregistration by providing <function>drm_irq_install</function> and
           <function>drm_irq_uninstall</function> functions. Those functions only
-          support a single interrupt per device.
-        </para>
-  <!--!Fdrivers/char/drm/drm_irq.c drm_irq_install-->
-        <para>
-          Both functions get the device IRQ by calling
-          <function>drm_dev_to_irq</function>. This inline function will call a
-          bus-specific operation to retrieve the IRQ number. For platform devices,
-          <function>platform_get_irq</function>(..., 0) is used to retrieve the
-          IRQ number.
-        </para>
-        <para>
-          <function>drm_irq_install</function> starts by calling the
-          <methodname>irq_preinstall</methodname> driver operation. The operation
-          is optional and must make sure that the interrupt will not get fired by
-          clearing all pending interrupt flags or disabling the interrupt.
-        </para>
-        <para>
-          The IRQ will then be requested by a call to
-          <function>request_irq</function>. If the DRIVER_IRQ_SHARED driver
-          feature flag is set, a shared (IRQF_SHARED) IRQ handler will be
-          requested.
-