summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-02-09Merge tag 'net-6.2-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can and ipsec subtrees. Current release - regressions: - sched: fix off by one in htb_activate_prios() - eth: mana: fix accessing freed irq affinity_hint - eth: ice: fix out-of-bounds KASAN warning in virtchnl Current release - new code bugs: - eth: mtk_eth_soc: enable special tag when any MAC uses DSA Previous releases - always broken: - core: fix sk->sk_txrehash default - neigh: make sure used and confirmed times are valid - mptcp: be careful on subflow status propagation on errors - xfrm: prevent potential spectre v1 gadget in xfrm_xlate32_attr() - phylink: move phy_device_free() to correctly release phy device - eth: mlx5: - fix crash unsetting rx-vlan-filter in switchdev mode - fix hang on firmware reset - serialize module cleanup with reload and remove" * tag 'net-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits) selftests: forwarding: lib: quote the sysctl values net: mscc: ocelot: fix all IPv6 getting trapped to CPU when PTP timestamping is used rds: rds_rm_zerocopy_callback() use list_first_entry() net: txgbe: Update support email address selftests: Fix failing VXLAN VNI filtering test selftests: mptcp: stop tests earlier selftests: mptcp: allow more slack for slow test-case mptcp: be careful on subflow status propagation on errors mptcp: fix locking for in-kernel listener creation mptcp: fix locking for setsockopt corner-case mptcp: do not wait for bare sockets' timeout net: ethernet: mtk_eth_soc: fix DSA TX tag hwaccel for switch port 0 nfp: ethtool: fix the bug of setting unsupported port speed txhash: fix sk->sk_txrehash default net: ethernet: mtk_eth_soc: fix wrong parameters order in __xdp_rxq_info_reg() net: ethernet: mtk_eth_soc: enable special tag when any MAC uses DSA net: sched: sch: Fix off by one in htb_activate_prios() igc: Add ndo_tx_timeout support net: mana: Fix accessing freed irq affinity_hint hv_netvsc: Allocate memory in netvsc_dma_map() with GFP_ATOMIC ...
2023-02-09Merge tag 'for-linus-2023020901' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Benjamin Tissoires: - fix potential infinite loop with a badly crafted HID device (Xin Zhao) - fix regression from 6.1 in USB logitech devices potentially making their mouse wheel not working (Bastien Nocera) - clean up in AMD sensors, which fixes a long time resume bug (Mario Limonciello) - few device small fixes and quirks * tag 'for-linus-2023020901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: Ignore battery for ELAN touchscreen 29DF on HP HID: amd_sfh: if no sensors are enabled, clean up HID: logitech: Disable hi-res scrolling on USB HID: core: Fix deadloop in hid_apply_multiplier. HID: Ignore battery for Elan touchscreen on Asus TP420IA HID: elecom: add support for TrackBall 056E:011C
2023-02-09Merge tag '6.2-rc8-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifx fix from Steve French: "Small fix for use after free" * tag '6.2-rc8-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix use-after-free in rdata->read_into_pages()
2023-02-09selftests: forwarding: lib: quote the sysctl valuesHangbin Liu
When set/restore sysctl value, we should quote the value as some keys may have multi values, e.g. net.ipv4.ping_group_range Fixes: f5ae57784ba8 ("selftests: forwarding: lib: Add sysctl_set(), sysctl_restore()") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20230208032110.879205-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-09net: mscc: ocelot: fix all IPv6 getting trapped to CPU when PTP timestamping ↵Vladimir Oltean
is used While running this selftest which usually passes: ~/selftests/drivers/net/dsa# ./local_termination.sh eno0 swp0 TEST: swp0: Unicast IPv4 to primary MAC address [ OK ] TEST: swp0: Unicast IPv4 to macvlan MAC address [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address, promisc [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address, allmulti [ OK ] TEST: swp0: Multicast IPv4 to joined group [ OK ] TEST: swp0: Multicast IPv4 to unknown group [ OK ] TEST: swp0: Multicast IPv4 to unknown group, promisc [ OK ] TEST: swp0: Multicast IPv4 to unknown group, allmulti [ OK ] TEST: swp0: Multicast IPv6 to joined group [ OK ] TEST: swp0: Multicast IPv6 to unknown group [ OK ] TEST: swp0: Multicast IPv6 to unknown group, promisc [ OK ] TEST: swp0: Multicast IPv6 to unknown group, allmulti [ OK ] if I start PTP timestamping then run it again (debug prints added by me), the unknown IPv6 MC traffic is seen by the CPU port even when it should have been dropped: ~/selftests/drivers/net/dsa# ptp4l -i swp0 -2 -P -m ptp4l[225.410]: selected /dev/ptp1 as PTP clock [ 225.445746] mscc_felix 0000:00:00.5: ocelot_l2_ptp_trap_add: port 0 adding L2 PTP trap [ 225.453815] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_add: port 0 adding IPv4 PTP event trap [ 225.462703] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_add: port 0 adding IPv4 PTP general trap [ 225.471768] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_add: port 0 adding IPv6 PTP event trap [ 225.480651] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_add: port 0 adding IPv6 PTP general trap ptp4l[225.488]: port 1: INITIALIZING to LISTENING on INIT_COMPLETE ptp4l[225.488]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE ^C ~/selftests/drivers/net/dsa# ./local_termination.sh eno0 swp0 TEST: swp0: Unicast IPv4 to primary MAC address [ OK ] TEST: swp0: Unicast IPv4 to macvlan MAC address [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address, promisc [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address, allmulti [ OK ] TEST: swp0: Multicast IPv4 to joined group [ OK ] TEST: swp0: Multicast IPv4 to unknown group [ OK ] TEST: swp0: Multicast IPv4 to unknown group, promisc [ OK ] TEST: swp0: Multicast IPv4 to unknown group, allmulti [ OK ] TEST: swp0: Multicast IPv6 to joined group [ OK ] TEST: swp0: Multicast IPv6 to unknown group [FAIL] reception succeeded, but should have failed TEST: swp0: Multicast IPv6 to unknown group, promisc [ OK ] TEST: swp0: Multicast IPv6 to unknown group, allmulti [ OK ] The PGID_MCIPV6 is configured correctly to not flood to the CPU, I checked that. Furthermore, when I disable back PTP RX timestamping (ptp4l doesn't do that when it exists), packets are RX filtered again as they should be: ~/selftests/drivers/net/dsa# hwstamp_ctl -i swp0 -r 0 [ 218.202854] mscc_felix 0000:00:00.5: ocelot_l2_ptp_trap_del: port 0 removing L2 PTP trap [ 218.212656] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_del: port 0 removing IPv4 PTP event trap [ 218.222975] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_del: port 0 removing IPv4 PTP general trap [ 218.233133] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_del: port 0 removing IPv6 PTP event trap [ 218.242251] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_del: port 0 removing IPv6 PTP general trap current settings: tx_type 1 rx_filter 12 new settings: tx_type 1 rx_filter 0 ~/selftests/drivers/net/dsa# ./local_termination.sh eno0 swp0 TEST: swp0: Unicast IPv4 to primary MAC address [ OK ] TEST: swp0: Unicast IPv4 to macvlan MAC address [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address, promisc [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address, allmulti [ OK ] TEST: swp0: Multicast IPv4 to joined group [ OK ] TEST: swp0: Multicast IPv4 to unknown group [ OK ] TEST: swp0: Multicast IPv4 to unknown group, promisc [ OK ] TEST: swp0: Multicast IPv4 to unknown group, allmulti [ OK ] TEST: swp0: Multicast IPv6 to joined group [ OK ] TEST: swp0: Multicast IPv6 to unknown group [ OK ] TEST: swp0: Multicast IPv6 to unknown group, promisc [ OK ] TEST: swp0: Multicast IPv6 to unknown group, allmulti [ OK ] So it's clear that something in the PTP RX trapping logic went wrong. Looking a bit at the code, I can see that there are 4 typos, which populate "ipv4" VCAP IS2 key filter fields for IPv6 keys. VCAP IS2 keys of type OCELOT_VCAP_KEY_IPV4 and OCELOT_VCAP_KEY_IPV6 are handled by is2_entry_set(). OCELOT_VCAP_KEY_IPV4 looks at &filter->key.ipv4, and OCELOT_VCAP_KEY_IPV6 at &filter->key.ipv6. Simply put, when we populate the wrong key field, &filter->key.ipv6 fields "proto.mask" and "proto.value" remain all zeroes (or "don't care"). So is2_entry_set() will enter the "else" of this "if" condition: if (msk == 0xff && (val == IPPROTO_TCP || val == IPPROTO_UDP)) and proceed to ignore the "proto" field. The resulting rule will match on all IPv6 traffic, trapping it to the CPU. This is the reason why the local_termination.sh selftest sees it, because control traps are stronger than the PGID_MCIPV6 used for flooding (from the forwarding data path). But the problem is in fact much deeper. We trap all IPv6 traffic to the CPU, but if we're bridged, we set skb->offload_fwd_mark = 1, so software forwarding will not take place and IPv6 traffic will never reach its destination. The fix is simple - correct the typos. I was intentionally inaccurate in the commit message about the breakage occurring when any PTP timestamping is enabled. In fact it only happens when L4 timestamping is requested (HWTSTAMP_FILTER_PTP_V2_EVENT or HWTSTAMP_FILTER_PTP_V2_L4_EVENT). But ptp4l requests a larger RX timestamping filter than it needs for "-2": HWTSTAMP_FILTER_PTP_V2_EVENT. I wanted people skimming through git logs to not think that the bug doesn't affect them because they only use ptp4l in L2 mode. Fixes: 96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230207183117.1745754-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-09rds: rds_rm_zerocopy_callback() use list_first_entry()Pietro Borrello
rds_rm_zerocopy_callback() uses list_entry() on the head of a list causing a type confusion. Use list_first_entry() to actually access the first element of the rs_zcookie_queue list. Fixes: 9426bbc6de99 ("rds: use list structure to track information for zerocopy completion notification") Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it> Link: https://lore.kernel.org/r/20230202-rds-zerocopy-v3-1-83b0df974f9a@diag.uniroma1.it Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-08Merge tag 'ipsec-2023-02-08' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== ipsec 2023-02-08 1) Fix policy checks for nested IPsec tunnels when using xfrm interfaces. From Benedict Wong. 2) Fix netlink message expression on 32=>64-bit messages translators. From Anastasia Belova. 3) Prevent potential spectre v1 gadget in xfrm_xlate32_attr. From Eric Dumazet. 4) Always consistently use time64_t in xfrm_timer_handler. From Eric Dumazet. 5) Fix KCSAN reported bug: Multiple cpus can update use_time at the same time. From Eric Dumazet. 6) Fix SCP copy from IPv4 to IPv6 on interfamily tunnel. From Christian Hopps. * tag 'ipsec-2023-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec: xfrm: fix bug with DSCP copy to v6 from v4 tunnel xfrm: annotate data-race around use_time xfrm: consistently use time64_t in xfrm_timer_handler() xfrm/compat: prevent potential spectre v1 gadget in xfrm_xlate32_attr() xfrm: compat: change expression for switch in xfrm_xlate64 Fix XFRM-I support for nested ESP tunnels ==================== Link: https://lore.kernel.org/r/20230208114322.266510-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-08net: txgbe: Update support email addressJiawen Wu
Update new email address for Wangxun 10Gb NIC support team. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://lore.kernel.org/r/20230208023035.3371250-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-08Merge tag 'mlx5-fixes-2023-02-07' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2023-02-07 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2023-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Serialize module cleanup with reload and remove net/mlx5: fw_tracer, Zero consumer index when reloading the tracer net/mlx5: fw_tracer, Clear load bit when freeing string DBs buffers net/mlx5: Expose SF firmware pages counter net/mlx5: Store page counters in a single array net/mlx5e: IPoIB, Show unknown speed instead of error net/mlx5e: Fix crash unsetting rx-vlan-filter in switchdev mode net/mlx5: Bridge, fix ageing of peer FDB entries net/mlx5: DR, Fix potential race in dr_rule_create_rule_nic net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change ==================== Link: https://lore.kernel.org/r/20230208030302.95378-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-08selftests: Fix failing VXLAN VNI filtering testIdo Schimmel
iproute2 does not recognize the "group6" and "remote6" keywords. Fix by using "group" and "remote" instead. Before: # ./test_vxlan_vnifiltering.sh [...] Tests passed: 25 Tests failed: 2 After: # ./test_vxlan_vnifiltering.sh [...] Tests passed: 27 Tests failed: 0 Fixes: 3edf5f66c12a ("selftests: add new tests for vxlan vnifiltering") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230207141819.256689-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-08Merge branch 'mptcp-fixes'David S. Miller
Matthieu Baerts says: ==================== mptcp: fixes for v6.2 Patch 1 clears resources earlier if there is no more reasons to keep MPTCP sockets alive. Patches 2 and 3 fix some locking issues visible in some rare corner cases: the linked issues should be quite hard to reproduce. Patch 4 makes sure subflows are correctly cleaned after the end of a connection. Patch 5 and 6 improve the selftests stability when running in a slow environment by transfering data for a longer period on one hand and by stopping the tests when all expected events have been observed on the other hand. All these patches fix issues introduced before v6.2. ==================== Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-08selftests: mptcp: stop tests earlierMatthieu Baerts
These 'endpoint' tests from 'mptcp_join.sh' selftest start a transfer in the background and check the status during this transfer. Once the expected events have been recorded, there is no reason to wait for the data transfer to finish. It can be stopped earlier to reduce the execution time by more than half. For these tests, the exchanged data were not verified. Errors, if any, were ignored but that's fine, plenty of other tests are looking at that. It is then OK to mute stderr now that we are sure errors will be printed (and still ignored) because the transfer is stopped before the end. Fixes: e274f7154008 ("selftests: mptcp: add subflow limits test-cases") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-08selftests: mptcp: allow more slack for slow test-casePaolo Abeni
A test-case is frequently failing on some extremely slow VMs. The mptcp transfer completes before the script is able to do all the required PM manipulation. Address the issue in the simplest possible way, making the transfer even more slow. Additionally dump more info in case of failures, to help debugging similar problems in the future and init dump_stats var. Fixes: e274f7154008 ("selftests: mptcp: add subflow limits test-cases") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/323 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-08mptcp: be careful on subflow status propagation on errorsPaolo Abeni
Currently the subflow error report callback unconditionally propagates the fallback subflow status to the owning msk. If the msk is already orphaned, the above prevents the code from correctly tracking the msk moving to the TCP_CLOSE state and doing the appropriate cleanup. All the above causes increasing memory usage over time and sporadic self-tests failures. There is a great deal of infrastructure trying to propagate correctly the fallback subflow status to the owning mptcp socket, e.g. via mptcp_subflow_eof() and subflow_sched_work_if_closed(): in the error propagation path we need only to cope with unorphaned sockets. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/339 Fixes: 15cc10453398 ("mptcp: deliver ssk errors to msk") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-08mptcp: fix locking for in-kernel listener creationPaolo Abeni
For consistency, in mptcp_pm_nl_create_listen_socket(), we need to call the __mptcp_nmpc_socket() under the msk socket lock. Note that as a side effect, mptcp_subflow_create_socket() needs a 'nested' lockdep annotation, as it will acquire the subflow (kernel) socket lock under the in-kernel listener msk socket lock. The current lack of locking is almost harmless, because the relevant socket is not exposed to the user space, but in future we will add more complexity to the mentioned helper, let's play safe. Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-08mptcp: fix locking for setsockopt corner-casePaolo Abeni
We need to call the __mptcp_nmpc_socket(), and later subflow socket access under the msk socket lock, or e.g. a racing connect() could change the socket status under the hood, with unexpected results. Fixes: 54635bd04701 ("mptcp: add TCP_FASTOPEN_CONNECT socket option") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-08mptcp: do not wait for bare sockets' timeoutPaolo Abeni
If the peer closes all the existing subflows for a given mptcp socket and later the application closes it, the current implementation let it survive until the timewait timeout expires. While the above is allowed by the protocol specification it consumes resources for almost no reason and additionally causes sporadic self-tests failures. Let's move the mptcp socket to the TCP_CLOSE state when there are no alive subflows at close time, so that the allocated resources will be freed immediately. Fixes: e16163b6e2b7 ("mptcp: refactor shutdown and close") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-08net: ethernet: mtk_eth_soc: fix DSA TX tag hwaccel for switch port 0Vladimir Oltean
Arınç reports that on his MT7621AT Unielec U7621-06 board and MT7623NI Bananapi BPI-R2, packets received by the CPU over mt7530 switch port 0 (of which this driver acts as the DSA master) are not processed correctly by software. More precisely, they arrive without a DSA tag (in packet or in the hwaccel area - skb_metadata_dst()), so DSA cannot demux them towards the switch's interface for port 0. Traffic from other ports receives a skb_metadata_dst() with the correct port and is demuxed properly. Looking at mtk_poll_rx(), it becomes apparent that this driver uses the skb vlan hwaccel area: union { u32 vlan_all; struct { __be16 vlan_proto; __u16 vlan_tci; }; }; as a temporary storage for the VLAN hwaccel tag, or the DSA hwaccel tag. If this is a DSA master it's a DSA hwaccel tag, and finally clears up the skb VLAN hwaccel header. I'm guessing that the problem is the (mis)use of API. skb_vlan_tag_present() looks like this: #define skb_vlan_tag_present(__skb) (!!(__skb)->vlan_all) So if both vlan_proto and vlan_tci are zeroes, skb_vlan_tag_present() returns precisely false. I don't know for sure what is the format of the DSA hwaccel tag, but I surely know that lowermost 3 bits of vlan_proto are 0 when receiving from port 0: unsigned int port = vlan_proto & GENMASK(2, 0); If the RX descriptor has no other bits set to non-zero values in RX_DMA_VTAG, then the call to __vlan_hwaccel_put_tag() will not, in fact, make the subsequent skb_vlan_tag_present() return true, because it's implemented like this: static inline void __vlan_hwaccel_put_tag(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci) { skb->vlan_proto = vlan_proto; skb->vlan_tci = vlan_tci; } What we need to do to fix this problem (assuming this is the problem) is to stop using skb->vlan_all as temporary storage for driver affairs, and just create some local variables that serve the same purpose, but hopefully better. Instead of calling skb_vlan_tag_present(), let's look at a boolean has_hwaccel_tag which we set to true when the RX DMA descriptors have something. Disambiguate based on netdev_uses_dsa() whether this is a VLAN or DSA hwaccel tag, and only call __vlan_hwaccel_put_tag() if we're certain it's a VLAN tag. Arınç confirms that the treatment works, so this validates the assumption. Link: https://lore.kernel.org/netdev/704f3a72-fc9e-714a-db54-272e17612637@arinc9.com/ Fixes: 2d7605a72906 ("net: ethernet: mtk_eth_soc: enable hardware DSA untagging") Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-08nfp: ethtool: fix the bug of setting unsupported port speedYu Xiao
Unsupported port speed can be set and cause error. Now fixing it and return an error if setting unsupported speed. This fix depends on the following, which was included in v6.2-rc1: commit a61474c41e8c ("nfp: ethtool: support reporting link modes"). Fixes: 7c698737270f ("nfp: add support for .set_link_ksettings()") Signed-off-by: Yu Xiao <yu.xiao@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-08txhash: fix sk->sk_txrehash defaultKevin Yang
This code fix a bug that sk->sk_txrehash gets its default enable value from sysctl_txrehash only when the socket is a TCP listener. We should have sysctl_txrehash to set the default sk->sk_txrehash, no matter TCP, nor listerner/connector. Tested by following packetdrill: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 socket(..., SOCK_DGRAM, IPPROTO_UDP) = 4 // SO_TXREHASH == 74, default to sysctl_txrehash == 1 +0 getsockopt(3, SOL_SOCKET, 74, [1], [4]) = 0 +0 getsockopt(4, SOL_SOCKET, 74, [1], [4]) = 0 Fixes: 26859240e4ee ("txhash: Add socket option to control TX hash rethink behavior") Signed-off-by: Kevin Yang <yyd@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-08net: ethernet: mtk_eth_soc: fix wrong parameters order in __xdp_rxq_info_reg()Tariq Toukan
Parameters 'queue_index' and 'napi_id' are passed in a swapped order. Fix it here. Fixes: 23233e577ef9 ("net: ethernet: mtk_eth_soc: rely on page_pool for single page buffers") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-08net: ethernet: mtk_eth_soc: enable special tag when any MAC uses DSAArınç ÜNAL
The special tag is only enabled when the first MAC uses DSA. However, it must be enabled when any MAC uses DSA. Change the check accordingly. This fixes hardware DSA untagging not working on the second MAC of the MT7621 and MT7623 SoCs, and likely other SoCs too. Therefore, remove the check that disables hardware DSA untagging for the second MAC of the MT7621 and MT7623 SoCs. Fixes: a1f47752fd62 ("net: ethernet: mtk_eth_soc: disable hardware DSA untagging for second MAC") Co-developed-by: Richard van Schagen <richard@routerhints.com> Signed-off-by: Richard van Schagen <richard@routerhints.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-07net: sched: sch: Fix off by one in htb_activate_prios()Dan Carpenter
The > needs be >= to prevent an out of bounds access. Fixes: de5ca4c3852f ("net: sched: sch: Bounds check priority") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/Y+D+KN18FQI2DKLq@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-07Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-02-06 (ice) This series contains updates to ice driver only. Ani removes WQ_MEM_RECLAIM flag from workqueue to resolve check_flush_dependency warning. Michal fixes KASAN out-of-bounds warning. Brett corrects behaviour for port VLAN Rx filters to prevent receiving of unintended traffic. Dan Carpenter fixes possible off by one issue. Zhang Changzhong adjusts error path for switch recipe to prevent memory leak. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: switch: fix potential memleak in ice_add_adv_recipe() ice: Fix off by one in ice_tc_forward_to_queue() ice: Fix disabling Rx VLAN filtering with port VLAN enabled ice: fix out-of-bounds KASAN warning in virtchnl ice: Do not use WQ_MEM_RECLAIM flag for workqueue ==================== Link: https://lore.kernel.org/r/20230206232934.634298-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-07igc: Add ndo_tx_timeout supportSasha Neftin
On some platforms, 100/1000/2500 speeds seem to have sometimes problems reporting false positive tx unit hang during stressful UDP traffic. Likely other Intel drivers introduce responses to a tx hang. Update the 'tx hang' comparator with the comparison of the head and tail of ring pointers and restore the tx_timeout_factor to the previous value (one). This can be test by using netperf or iperf3 applications. Example: iperf3 -s -p 5001 iperf3 -c 192.168.0.2 --udp -p 5001 --time 600 -b 0 netserver -p 16604 netperf -H 192.168.0.2 -l 600 -p 16604 -t UDP_STREAM -- -m 64000 Fixes: b27b8dc77b5e ("igc: Increase timeout value for Speed 100/1000/2500") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230206235818.662384-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-07net: mana: Fix accessing freed irq affinity_hintHaiyang Zhang
After calling irq_set_affinity_and_hint(), the cpumask pointer is saved in desc->affinity_hint, and will be used later when reading /proc/irq/<num>/affinity_hint. So the cpumask variable needs to be persistent. Otherwise, we are accessing freed memory when reading the affinity_hint file. Also, need to clear affinity_hint before free_irq(), otherwise there is a one-time warning and stack trace during module unloading: [ 243.948687] WARNING: CPU: 10 PID: 1589 at kernel/irq/manage.c:1913 free_irq+0x318/0x360 ... [ 243.948753] Call Trace: [ 243.948754] <TASK> [ 243.948760] mana_gd_remove_irqs+0x78/0xc0 [mana] [ 243.948767] mana_gd_remove+0x3e/0x80 [mana] [ 243.948773] pci_device_remove+0x3d/0xb0 [ 243.948778] device_remove+0x46/0x70 [ 243.948782] device_release_driver_internal+0x1fe/0x280 [ 243.948785] driver_detach+0x4e/0xa0 [ 243.948787] bus_remove_driver+0x70/0xf0 [ 243.948789] driver_unregister+0x35/0x60 [ 243.948792] pci_unregister_driver+0x44/0x90 [ 243.948794] mana_driver_exit+0x14/0x3fe [mana] [ 243.948800] __do_sys_delete_module.constprop.0+0x185/0x2f0 To fix the bug, use the persistent mask, cpumask_of(cpu#), and set affinity_hint to NULL before freeing the IRQ, as required by free_irq(). Cc: stable@vger.kernel.org Fixes: 71fa6887eeca ("net: mana: Assign interrupts to CPUs based on NUMA nodes") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/1675718929-19565-1-git-send-email-haiyangz@microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-07Merge tag 'linux-can-fixes-for-6.2-20230207' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== can 2023-02-07 The patch is from Devid Antonio Filoni and fixes an address claiming problem in the J1939 CAN protocol. * tag 'linux-can-fixes-for-6.2-20230207' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: j1939: do not wait 250 ms if the same addr was already claimed ==================== Link: https://lore.kernel.org/r/20230207140514.2885065-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-07hv_netvsc: Allocate memory in netvsc_dma_map() with GFP_ATOMICMichael Kelley
Memory allocations in the network transmit path must use GFP_ATOMIC so they won't sleep. Reported-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/lkml/8a4d08f94d3e6fe8b6da68440eaa89a088ad84f9.camel@redhat.com/ Fixes: 846da38de0e8 ("net: netvsc: Add Isolation VM support for netvsc driver") Cc: stable@vger.kernel.org Signed-off-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1675714317-48577-1-git-send-email-mikelley@microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-07net/mlx5: Serialize module cleanup with reload and removeShay Drory
Currently, remove and reload flows can run in parallel to module cleanup. This design is error prone. For example: aux_drivers callbacks are called from both cleanup and remove flows with different lockings, which can cause a deadlock[1]. Hence, serialize module cleanup with reload and remove. [1] cleanup remove ------- ------ auxiliary_driver_unregister(); devl_lock() auxiliary_device_delete(mlx5e_aux) device_lock(mlx5e_aux) devl_lock() device_lock(mlx5e_aux) Fixes: 912cebf420c2 ("net/mlx5e: Connect ethernet part to auxiliary bus") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-02-07net/mlx5: fw_tracer, Zero consumer index when reloading the tracerShay Drory
When tracer is reloaded, the device will log the traces at the beginning of the log buffer. Also, driver is reading the log buffer in chunks in accordance to the consumer index. Hence, zero consumer index when reloading the tracer. Fixes: 4383cfcc65e7 ("net/mlx5: Add devlink reload") Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-02-07net/mlx5: fw_tracer, Clear load bit when freeing string DBs buffersShay Drory
Whenever the driver is reading the string DBs into buffers, the driver is setting the load bit, but the driver never clears this bit. As a result, in case load bit is on and the driver query the device for new string DBs, the driver won't read again the string DBs. Fix it by clearing the load bit when query the device for new string DBs. Fixes: 2d69356752ff ("net/mlx5: Add support for fw live patch event") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-02-07net/mlx5: Expose SF firmware pages counterMaher Sanalla
Currently, each core device has VF pages counter which stores number of fw pages used by its VFs and SFs. The current design led to a hang when performing firmware reset on DPU, where the DPU PFs stalled in sriov unload flow due to waiting on release of SFs pages instead of waiting on only VFs pages. Thus, Add a separate counter for SF firmware pages, which will prevent the stall scenario described above. Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-02-07net/mlx5: Store page counters in a single arrayMaher Sanalla
Currently, an independent page counter is used for tracking memory usage for each function type such as VF, PF and host PF (DPU). For better code-readibilty, use a single array that stores the number of allocated memory pages for each function type. Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-02-07net/mlx5e: IPoIB, Show unknown speed instead of errorDragos Tatulea
ethtool is returning an error for unknown speeds for the IPoIB interface: $ ethtool ib0 netlink error: failed to retrieve link settings netlink error: Invalid argument netlink error: failed to retrieve link settings netlink error: Invalid argument Settings for ib0: Link detected: no After this change, ethtool will return success and show "unknown speed": $ ethtool ib0 Settings for ib0: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: Unknown! Duplex: Full Auto-negotiation: off Port: Other PHYAD: 0 Transceiver: internal Link detected: no Fixes: eb234ee9d541 ("net/mlx5e: IPoIB, Add support for get_link_ksettings in ethtool") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-02-07net/mlx5e: Fix crash unsetting rx-vlan-filter in switchdev modeAmir Tzin
Moving to switchdev mode with rx-vlan-filter on and then setting it off causes the kernel to crash since fs->vlan is freed during nic profile cleanup flow. RX VLAN filtering is not supported in switchdev mode so unset it when changing to switchdev and restore its value when switching back to legacy. trace: [] RIP: 0010:mlx5e_disable_cvlan_filter+0x43/0x70 [] set_feature_cvlan_filter+0x37/0x40 [mlx5_core] [] mlx5e_handle_feature+0x3a/0x60 [mlx5_core] [] mlx5e_set_features+0x6d/0x160 [mlx5_core] [] __netdev_update_features+0x288/0xa70 [] ethnl_set_features+0x309/0x380 [] ? __nla_parse+0x21/0x30 [] genl_family_rcv_msg_doit.isra.17+0x110/0x150 [] genl_rcv_msg+0x112/0x260 [] ? features_reply_size+0xe0/0xe0 [] ? genl_family_rcv_msg_doit.isra.17+0x150/0x150 [] netlink_rcv_skb+0x4e/0x100 [] genl_rcv+0x24/0x40 [] netlink_unicast+0x1ab/0x290 [] netlink_sendmsg+0x257/0x4f0 [] sock_sendmsg+0x5c/0x70 Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors") Signed-off-by: Amir Tzin <amirtz@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-02-07net/mlx5: Bridge, fix ageing of peer FDB entriesVlad Buslov
SWITCHDEV_FDB_ADD_TO_BRIDGE event handler that updates FDB entry 'lastuse' field is only executed for eswitch that owns the entry. However, if peer entry processed packets at least once it will have hardware counter 'used' value greater than entry 'lastuse' from that point on, which will cause FDB entry not being aged out. Process the event on all eswitch instances. Fixes: ff9b7521468b ("net/mlx5: Bridge, support LAG") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-02-07net/mlx5: DR, Fix potential race in dr_rule_create_rule_nicYevgeny Kliteynik
Selecting builder should be protected by the lock to prevent the case where a new rule sets a builder in the nic_matcher while the previous rule is still using the nic_matcher. Fixing this issue and cleaning the error flow. Fixes: b9b81e1e9382 ("net/mlx5: DR, For short chains of STEs, avoid allocating ste_arr dynamically") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-02-07net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag changeAdham Faris
rq->hw_mtu is used in function en_rx.c/mlx5e_skb_from_cqe_mpwrq_linear() to catch oversized packets. If FCS is concatenated to the end of the packet then the check should be updated accordingly. Rx rings initialization (mlx5e_init_rxq_rq()) invoked for every new set of channels, as part of mlx5e_safe_switch_params(), unknowingly if it runs with default configuration or not. Current rq->hw_mtu initialization assumes default configuration and ignores params->scatter_fcs_en flag state. Fix this, by accounting for params->scatter_fcs_en flag state during rq->hw_mtu initialization. In addition, updating rq->hw_mtu value during ingress traffic might lead to packets drop and oversize_pkts_sw_drop counter increase with no good reason. Hence we remove this optimization and switch the set of channels with a new one, to make sure we don't get false positives on the oversize_pkts_sw_drop counter. Fixes: 102722fc6832 ("net/mlx5e: Add support for RXFCS feature flag") Signed-off-by: Adham Faris <afaris@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-02-07Merge tag 'devicetree-fixes-for-6.2-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Fix handling of multiple OF framebuffer devices - Fix booting on Socionext Synquacer with bad 'dma-ranges' entries - Add DT binding .yamllint to .gitignore * tag 'devicetree-fixes-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: interrupt-controller: arm,gic-v3: Fix typo in description of msi-controller property dt-bindings: Fix .gitignore of/address: Return an error when no valid dma-ranges are found of: Make OF framebuffer device names unique
2023-02-07Merge tag 'trace-v6.2-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fix from Steven Rostedt: "Fix regression in poll() and select() With the fix that made poll() and select() block if read would block caused a slight regression in rasdaemon, as it needed that kind of behavior. Add a way to make that behavior come back by writing zero into the 'buffer_percentage', which means to never block on read" * tag 'trace-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Fix poll() and select() do not work on per_cpu trace_pipe and trace_pipe_raw
2023-02-07can: j1939: do not wait 250 ms if the same addr was already claimedDevid Antonio Filoni
The ISO 11783-5 standard, in "4.5.2 - Address claim requirements", states: d) No CF shall begin, or resume, transmission on the network until 250 ms after it has successfully claimed an address except when responding to a request for address-claimed. But "Figure 6" and "Figure 7" in "4.5.4.2 - Address-claim prioritization" show that the CF begins the transmission after 250 ms from the first AC (address-claimed) message even if it sends another AC message during that time window to resolve the address contention with another CF. As stated in "4.4.2.3 - Address-claimed message": In order to successfully claim an address, the CF sending an address claimed message shall not receive a contending claim from another CF for at least 250 ms. As stated in "4.4.3.2 - NAME management (NM) message": 1) A commanding CF can d) request that a CF with a specified NAME transmit the address- claimed message with its current NAME. 2) A target CF shall d) send an address-claimed message in response to a request for a matching NAME Taking the above arguments into account, the 250 ms wait is requested only during network initialization. Do not restart the timer on AC message if both the NAME and the address match and so if the address has already been claimed (timer has expired) or the AC message has been sent to resolve the contention with another CF (timer is still running). Signed-off-by: Devid Antonio Filoni <devid.filoni@egluetechnologies.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20221125170418.34575-1-devid.filoni@egluetechnologies.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-07devlink: change port event netdev notifier from per-net to globalJiri Pirko
Currently only the network namespace of devlink instance is monitored for port events. If netdev is moved to a different namespace and then unregistered, NETDEV_PRE_UNINIT is missed which leads to trigger following WARN_ON in devl_port_unregister(). WARN_ON(devlink_port->type != DEVLINK_PORT_TYPE_NOTSET); Fix this by changing the netdev notifier from per-net to global so no event is missed. Fixes: 02a68a47eade ("net: devlink: track netdev with devlink_port assigned") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20230206094151.2557264-1-jiri@resnulli.us Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-07selftests: ocelot: tc_flower_chains: make test_vlan_ingress_modify() more ↵Vladimir Oltean
comprehensive We have two IS1 filters of the OCELOT_VCAP_KEY_ANY key type (the one with "action vlan pop" and the one with "action vlan modify") and one of the OCELOT_VCAP_KEY_IPV4 key type (the one with "action skbedit priority"). But we have no IS1 filter with the OCELOT_VCAP_KEY_ETYPE key type, and there was an uncaught breakage there. To increase test coverage, convert one of the OCELOT_VCAP_KEY_ANY filters to OCELOT_VCAP_KEY_ETYPE, by making the filter also match on the MAC SA of the traffic sent by mausezahn, $h1_mac. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230205192409.1796428-2-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-07net: mscc: ocelot: fix VCAP filters not matching on MAC with "protocol 802.1Q"Vladimir Oltean
Alternative short title: don't instruct the hardware to match on EtherType with "protocol 802.1Q" flower filters. It doesn't work for the reasons detailed below. With a command such as the following: tc filter add dev $swp1 ingress chain $(IS1 2) pref 3 \ protocol 802.1Q flower skip_sw vlan_id 200 src_mac $h1_mac \ action vlan modify id 300 \ action goto chain $(IS2 0 0) the created filter is set by ocelot_flower_parse_key() to be of type OCELOT_VCAP_KEY_ETYPE, and etype is set to {value=0x8100, mask=0xffff}. This gets propagated all the way to is1_entry_set() which commits it to hardware (the VCAP_IS1_HK_ETYPE field of the key). Compare this to the case where src_mac isn't specified - the key type is OCELOT_VCAP_KEY_ANY, and is1_entry_set() doesn't populate VCAP_IS1_HK_ETYPE. The problem is that for VLAN-tagged frames, the hardware interprets the ETYPE field as holding the encapsulated VLAN protocol. So the above filter will only match those packets which have an encapsulated protocol of 0x8100, rather than all packets with VLAN ID 200 and the given src_mac. The reason why this is allowed to occur is because, although we have a block of code in ocelot_flower_parse_key() which sets "match_protocol" to false when VLAN keys are present, that code executes too late. There is another block of code, which executes for Ethernet addresses, and has a "goto finished_key_parsing" and skips the VLAN header parsing. By skipping it, "match_protocol" remains with the value it was initialized with, i.e. "true", and "proto" is set to f->common.protocol, or 0x8100. The concept of ignoring some keys rather than erroring out when they are present but can't be offloaded is dubious in itself, but is present since the initial commit fe3490e6107e ("net: mscc: ocelot: Hardware ofload for tc flower filter"), and it's outside of the scope of this patch to change that. The problem was introduced when the driver started to interpret the flower filter's protocol, and populate the VCAP filter's ETYPE field based on it. To fix this, it is sufficient to move the code that parses the VLAN keys earlier than the "goto finished_key_parsing" instruction. This will ensure that if we have a flower filter with both VLAN and Ethernet address keys, it won't match on ETYPE 0x8100, because the VLAN key parsing sets "match_protocol = false". Fixes: 86b956de119c ("net: mscc: ocelot: support matching on EtherType") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230205192409.1796428-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-07net: dsa: mt7530: don't change PVC_EG_TAG when CPU port becomes VLAN-awareVladimir Oltean
Frank reports that in a mt7530 setup where some ports are standalone and some are in a VLAN-aware bridge, 8021q uppers of the standalone ports lose their VLAN tag on xmit, as seen by the link partner. This seems to occur because once the other ports join the VLAN-aware bridge, mt7530_port_vlan_filtering() also calls mt7530_port_set_vlan_aware(ds, cpu_dp->index), and this affects the way that the switch processes the traffic of the standalone port. Relevant is the PVC_EG_TAG bit. The MT7530 documentation says about it: EG_TAG: Incoming Port Egress Tag VLAN Attribution 0: disabled (system default) 1: consistent (keep the original ingress tag attribute) My interpretation is that this setting applies on the ingress port, and "disabled" is basically the normal behavior, where the egress tag format of the packet (tagged or untagged) is decided by the VLAN table (MT7530_VLAN_EGRESS_UNTAG or MT7530_VLAN_EGRESS_TAG). But there is also an option of overriding the system default behavior, and for the egress tagging format of packets to be decided not by the VLAN table, but simply by copying the ingress tag format (if ingress was tagged, egress is tagged; if ingress was untagged, egress is untagged; aka "consistent). This is useful in 2 scenarios: - VLAN-unaware bridge ports will always encounter a miss in the VLAN table. They should forward a packet as-is, though. So we use "consistent" there. See commit e045124e9399 ("net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode"). - Traffic injected from the CPU port. The operating system is in god mode; if it wants a packet to exit as VLAN-tagged, it sends it as VLAN-tagged. Otherwise it sends it as VLAN-untagged*. *This is true only if we don't consider the bridge TX forwarding offload feature, which mt7530 doesn't support. So for now, make the CPU port always stay in "consistent" mode to allow software VLANs to be forwarded to their egress ports with the VLAN tag intact, and not stripped. Link: https://lore.kernel.org/netdev/trinity-e6294d28-636c-4c40-bb8b-b523521b00be-1674233135062@3c-app-gmx-bs36/ Fixes: e045124e9399 ("net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode") Reported-by: Frank Wunderlich <frank-w@public-files.de> Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230205140713.1609281-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-06cifs: Fix use-after-free in rdata->read_into_pages()ZhaoLong Wang
When the network status is unstable, use-after-free may occur when read data from the server. BUG: KASAN: use-after-free in readpages_fill_pages+0x14c/0x7e0 Call Trace: <TASK> dump_stack_lvl+0x38/0x4c print_report+0x16f/0x4a6 kasan_report+0xb7/0x130 readpages_fill_pages+0x14c/0x7e0 cifs_readv_receive+0x46d/0xa40 cifs_demultiplex_thread+0x121c/0x1490 kthread+0x16b/0x1a0 ret_from_fork+0x2c/0x50 </TASK> Allocated by task 2535: kasan_save_stack+0x22/0x50 kasan_set_track+0x25/0x30 __kasan_kmalloc+0x82/0x90 cifs_readdata_direct_alloc+0x2c/0x110 cifs_readdata_alloc+0x2d/0x60 cifs_readahead+0x393/0xfe0 read_pages+0x12f/0x470 page_cache_ra_unbounded+0x1b1/0x240 filemap_get_pages+0x1c8/0x9a0 filemap_read+0x1c0/0x540 cifs_strict_readv+0x21b/0x240 vfs_read+0x395/0x4b0 ksys_read+0xb8/0x150 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Freed by task 79: kasan_save_stack+0x22/0x50 kasan_set_track+0x25/0x30 kasan_save_free_info+0x2e/0x50 __kasan_slab_free+0x10e/0x1a0 __kmem_cache_free+0x7a/0x1a0 cifs_readdata_release+0x49/0x60 process_one_work+0x46c/0x760 worker_thread+0x2a4/0x6f0 kthread+0x16b/0x1a0 ret_from_fork+0x2c/0x50 Last potentially related work creation: kasan_save_stack+0x22/0x50 __kasan_record_aux_stack+0x95/0xb0 insert_work+0x2b/0x130 __queue_work+0x1fe/0x660 queue_work_on+0x4b/0x60 smb2_readv_callback+0x396/0x800 cifs_abort_connection+0x474/0x6a0 cifs_reconnect+0x5cb/0xa50 cifs_readv_from_socket.cold+0x22/0x6c cifs_read_page_from_socket+0xc1/0x100 readpages_fill_pages.cold+0x2f/0x46 cifs_readv_receive+0x46d/0xa40 cifs_demultiplex_thread+0x121c/0x1490 kthread+0x16b/0x1a0 ret_from_fork+0x2c/0x50 The following function calls will cause UAF of the rdata pointer. readpages_fill_pages cifs_read_page_from_socket cifs_readv_from_socket cifs_reconnect __cifs_reconnect cifs_abort_connection mid->callback() --> smb2_readv_callback queue_work(&rdata->work) # if the worker completes first, # the rdata is freed cifs_readv_complete kref_put cifs_readdata_release kfree(rdata) return rdata->... # UAF in readpages_fill_pages() Similarly, this problem also occurs in the uncache_fill_pages(). Fix this by adjusts the order of condition judgment in the return statement. Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com> Cc: stable@vger.kernel.org Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-02-06ice: switch: fix potential memleak in ice_add_adv_recipe()Zhang Changzhong
When ice_add_special_words() fails, the 'rm' is not released, which will lead to a memory leak. Fix this up by going to 'err_unroll' label. Compile tested only. Fixes: 8b032a55c1bd ("ice: low level support for tunnels") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
2023-02-06ice: Fix off by one in ice_tc_forward_to_queue()Dan Carpenter
The > comparison should be >= to prevent reading one element beyond the end of the array. The "vsi->num_rxq" is not strictly speaking the number of elements in the vsi->rxq_map[] array. The array has "vsi->alloc_rxq" elements and "vsi->num_rxq" is less than or equal to the number of elements in the array. The array is allocated in ice_vsi_alloc_arrays(). It's still an off by one but it might not access outside the end of the array. Fixes: 143b86f346c7 ("ice: Enable RX queue selection using skbedit action") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
2023-02-06ice: Fix disabling Rx VLAN filtering with port VLAN enabledBrett Creeley
If the user turns on the vf-true-promiscuous-support flag, then Rx VLAN filtering will be disabled if the VF requests to enable promiscuous mode. When the VF is in a port VLAN, this is the incorrect behavior because it will allow the VF to receive traffic outside of its port VLAN domain. Fortunately this only resulted in the VF(s) receiving broadcast traffic outside of the VLAN domain because all of the VLAN promiscuous rules are based on the port VLAN ID. Fix this by setting the .disable_rx_filtering VLAN op to a no-op when a port VLAN is enabled on the VF. Also, make sure to make this fix for both Single VLAN Mode and Double VLAN Mode enabled devices. Fixes: c31af68a1b94 ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-06ice: fix out-of-bounds KASAN warning in virtchnlMichal Swiatkowski
KASAN reported: [ 9793.708867] BUG: KASAN: global-out-of-bounds in ice_get_link_speed+0x16/0x30 [ice] [ 9793.709205] Read of size 4 at addr ffffffffc1271b1c by task kworker/6:1/402 [ 9793.709222] CPU: 6 PID: 402 Comm: kworker/6:1 Kdump: loaded Tainted: G B OE 6.1.0+ #3 [ 9793.709235] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0014.070920180847 07/09/2018 [ 9793.709245] Workqueue: ice ice_service_task [ice] [ 9793.709575] Call Trace: [ 9793.709582] <TASK> [ 9793.709588] dump_stack_lvl+0x44/0x5c [ 9793.709613] print_report+0x17f/0x47b [ 9793.709632] ? __cpuidle_text_end+0x5/0x5 [ 9793.709653] ? ice_get_link_speed+0x16/0x30 [ice] [ 9793.709986] ? ice_get_link_speed+0x16/0x30 [ice] [ 9793.710317] kasan_report+0xb7/0x140 [ 9793.710335] ? ice_get_link_speed+0x16/0x30 [ice] [ 9793.710673] ice_get_link_speed+0x16/0x30 [ice] [ 9793.711006] ice_vc_notify_vf_link_state+0x14c/0x160 [ice] [ 9793.711351] ? ice_vc_repr_cfg_promiscuous_mode+0x120/0x120 [ice] [ 9793.711698] ice_vc_process_vf_msg+0x7a7/0xc00 [ice] [ 9793.712074] __ice_clean_ctrlq+0x98f/0xd20 [ice] [ 9793.712534] ? ice_bridge_setlink+0x410/0x410 [ice] [ 9793.712979] ? __request_module+0x320/0x520 [ 9793.713014] ? ice_process_vflr_event+0x27/0x130 [ice] [ 9793.713489] ice_service_task+0x11cf/0x1950 [ice] [ 9793.713948] ? io_schedule_timeout+0xb0/0xb0 [ 9793.713972] process_one_work+0x3d0/0x6a0 [ 9793.714003] worker_thread+0x8a/0x610 [ 9793.714031] ? process_one_work+0x6a0/0x6a0 [ 9793.714049] kthread+0x164/0x1a0 [ 9793.714071] ? kthread_complete_and_exit+0x20/0x20 [ 9793.714100] ret_from_fork+0x1f/0x30 [ 9793.714137] </TASK> [ 9793.714151] The buggy address belongs to the variable: [ 9793.714158] ice_aq_to_link_speed+0x3c/0xffffffffffff3520 [ice] [ 9793.714632] Memory state around the buggy address: [ 9793.714642] ffffffffc1271a00: f9 f9 f9 f9 00 00 05 f9 f9 f9 f9 f9 00 00 02 f9 [ 9793.714656] ffffffffc1271a80: f9 f9 f9 f9 00 00 04 f9 f9 f9 f9 f9 00 00 00 00 [ 9793.714670] >ffffffffc1271b00: 00 00 00 04 f9 f9 f9 f9 04 f9 f9 f9 f9 f9 f9 f9 [ 9793.714680] ^ [ 9793.714690] ffffffffc1271b80: 00 00 00 00 00 04 f9 f9 f9 f9 f9 f9 00 00 00 00 [ 9793.714704] ffffffffc1271c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 The ICE_AQ_LINK_SPEED_UNKNOWN define is BIT(15). The value is bigger than both legacy and normal link speed tables. Add one element (0 - unknown) to both tables. There is no need to explicitly set table size, leave it empty. Fixes: 1d0e28a9be1f ("ice: Remove and replace ice speed defines with ethtool.h versions") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
generated by cgit (git 2.34.1) at 2025-09-15 15:16:34 +0000