summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-28gpiolib: Unify access to the device propertiesAndy Shevchenko
Some of the functions are using struct fwnode_handle, some struct device pointer. In the GPIO library the firmware node of the GPIO device is the same as GPIO node of the GPIO chip. Due to this fact we may use former to access properties everywhere in the code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Brian Masney <bmasney@redhat.com> Tested-by: Marijn Suijten <marijn.suijten@somainline.org> [Bartosz: stick to the 80-char limit where it's not hurting readability] Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-28gpio: Do not include <linux/kernel.h> when not really needed.Christophe JAILLET
<linux/kernel.h> is included only for using container_of(). Include <linux/container_of.h> instead, it is much lighter. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-24gpio: pcf857x: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-24gpio: pca953x: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-24gpio: max732x: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-24Merge branch 'i2c/client_device_id_helper-immutable' of ↵Bartosz Golaszewski
https://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into gpio/for-next Introduce the i2c_client_get_device_id() helper.
2022-11-16dt-bindings: gpio: gpio-davinci: Increase maxItems in gpio-line-namesNishanth Menon
gpio-line-names really depends on ti,ngpios. However, the maximum value we have seen across the board is on K2G and da850 platforms where it can be upto 144. Link: https://lore.kernel.org/linux-arm-kernel/20221115200357.qa2rvw3clbz7unzq@symptom/T/#u Fixes: c830b87a761b ("dt-bindings: gpio: gpio-davinci: Convert to json-schema") Reported-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-16Merge tag 'intel-gpio-v6.2-1' of ↵Bartosz Golaszewski
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next intel-gpio for v6.2-1 * Miscellaneous updates to the core (cdev, acpi) and Intel Merrifield driver The following is an automated git shortlog grouped by driver: gpiolib: - cdev: Fix typo in kernel doc for struct line - acpi: Use METHOD_NAME__AEI macro for acpi_walk_resources merrifield: - Use str_enable_disable() helper
2022-11-16gpiolib: ensure that fwnode is properly setBrian Masney
Note that this is a RFC patch and not meant to be merged. I looked into a problem with linux-next-20221110 on the Qualcomm SA8540P automotive board (sc8280xp) where the UFS host controller would fail to probe due to repeated probe deferrals when trying to get reset-gpios via devm_gpiod_get_optional(). of_get_named_gpiod_flags() returns -EPROBE_DEFER, which is caused by of_gpiochip_match_node_and_xlate() returning 0 since the of_xlate function pointer is not set for the qcom,sc8280xp-tlmm pinctrl driver. The pinctrl driver doesn't define one, so of_gpiochip_add() should automatically setup of_gpio_simple_xlate() on it's behalf. This doesn't happen since the fwnode member on the struct gpiochip is set to null when of_gpiochip_add() is called. Let's work around this by ensuring that it's set if available. Note that this broke sometime within the last few weeks within linux-next and I haven't bisected this. I'm posting this in the hopes that someone may know offhand which patch(es) may have broken this. Signed-off-by: Brian Masney <bmasney@redhat.com> Tested-by: Marijn Suijten <marijn.suijten@somainline.org> Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> #Lenovo Thinkpad X13s Tested-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-15gpio: sl28cpld: Replace irqchip mask_invert with unmask_baseAidan MacDonald
Remove use of the deprecated mask_invert flag. Inverted mask registers (where a '1' bit enables an IRQ) can be described more directly as an unmask register. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-15gpiolib: of: Use correct fwnode for DT-probed chipsThierry Reding
The OF node store in chip->fwnode is used to explicitly override the FW node for a GPIO chip. For chips that use the default FW node (i.e. that of their parent device), this will be NULL and cause the chip not to be fully registered. Instead, use the GPIO device's FW node, which is set to either the node of the parent device or the explicit override in chip->fwnode. Fixes: 8afe82550240 ("gpiolib: of: Prepare of_gpiochip_add() / of_gpiochip_remove() for fwnode") Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Robert Marko <robimarko@gmail.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Brian Masney <bmasney@redhat.com> Tested-by: Brian Masney <bmasney@redhat.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-15gpiolib: of: Drop redundant check in of_mm_gpiochip_remove()Andy Shevchenko
The callers never call the function with invalid pointer. Moreover, compiler quite likely dropped that check anyway because we use that pointer before the check. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-15gpiolib: of: Prepare of_mm_gpiochip_add_data() for fwnodeAndy Shevchenko
GPIO library is getting rid of of_node, fwnode should be utilized instead. Prepare of_mm_gpiochip_add_data() for fwnode. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-15gpiolib: add support for software nodesDmitry Torokhov
Now that static device properties understand notion of child nodes and references, let's teach gpiolib to handle them: - GPIOs are represented as a references to software nodes representing gpiochip - references must have 2 arguments - GPIO number within the chip and GPIO flags (GPIO_ACTIVE_LOW/GPIO_ACTIVE_HIGH, etc) - a new PROPERTY_ENTRY_GPIO() macro is supplied to ensure the above - name of the software node representing gpiochip must match label of the gpiochip, as we use it to locate gpiochip structure at runtime The following illustrates use of software nodes to describe a "System" button that is currently specified via use of gpio_keys_platform_data in arch/mips/alchemy/board-mtx1.c. It follows bindings specified in Documentation/devicetree/bindings/input/gpio-keys.yaml. static const struct software_node mxt1_gpiochip2_node = { .name = "alchemy-gpio2", }; static const struct property_entry mtx1_gpio_button_props[] = { PROPERTY_ENTRY_U32("linux,code", BTN_0), PROPERTY_ENTRY_STRING("label", "System button"), PROPERTY_ENTRY_GPIO("gpios", &mxt1_gpiochip2_node, 7, GPIO_ACTIVE_LOW), { } }; Similarly, arch/arm/mach-tegra/board-paz00.c can be converted to: static const struct software_node tegra_gpiochip_node = { .name = "tegra-gpio", }; static struct property_entry wifi_rfkill_prop[] __initdata = { PROPERTY_ENTRY_STRING("name", "wifi_rfkill"), PROPERTY_ENTRY_STRING("type", "wlan"), PROPERTY_ENTRY_GPIO("reset-gpios", &tegra_gpiochip_node, 25, GPIO_ACTIVE_HIGH); PROPERTY_ENTRY_GPIO("shutdown-gpios", &tegra_gpiochip_node, 85, GPIO_ACTIVE_HIGH); { }, }; static struct platform_device wifi_rfkill_device = { .name = "rfkill_gpio", .id = -1, }; ... software_node_register(&tegra_gpiochip_node); device_create_managed_software_node(&wifi_rfkill_device.dev, wifi_rfkill_prop, NULL); Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-15gpiolib: consolidate GPIO lookupsDmitry Torokhov
Ensure that all paths to obtain/look up GPIOD from generic consumer-visible APIs go through the new gpiod_find_and_request() helper, so that we can easily extend it with support for new firmware mechanisms. The only exception is OF-specific [devm_]gpiod_get_from_of_node() API that is still being used by a couple of drivers and will be removed as soon as patches converting them to use generic fwnode/device APIs are accepted. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-15gpiolib: acpi: avoid leaking ACPI details into upper gpiolib layersDmitry Torokhov
There is no need for the generic parts of GPIOLIB to be aware of implementation details of ACPI-bases lookups. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-15gpiolib: acpi: teach acpi_find_gpio() to handle data-only nodesDmitry Torokhov
In preparation of switching all ACPI-based GPIO lookups to go through acpi_find_gpio() we need to make sure it can handle data-only ACPI nodes, same as existing acpi_node_get_gpiod(). Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-15gpiolib: acpi: change acpi_find_gpio() to accept firmware nodeDmitry Torokhov
In preparation of switching all ACPI-based GPIO lookups to go through acpi_find_gpio() let's change it to accept device node as its argument as we do not always have access to device structure. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-15gpiolib: of: change of_find_gpio() to accept device nodeDmitry Torokhov
In preparation of switching all OF-based GPIO lookups to go through of_find_gpio() let's change it to accept device node as its argument as we do not always have access to device structure. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-14i2c: core: Introduce i2c_client_get_device_id helper functionAngel Iglesias
Introduces new helper function to aid in .probe_new() refactors. In order to use existing i2c_get_device_id() on the probe callback, the device match table needs to be accessible in that function, which would require bigger refactors in some drivers using the deprecated .probe callback. This issue was discussed in more detail in the IIO mailing list. Link: https://lore.kernel.org/all/20221023132302.911644-11-u.kleine-koenig@pengutronix.de/ Suggested-by: Nuno Sá <noname.nuno@gmail.com> Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-11-10gpio: davinci: add support of module buildGuillaume La Roque
Added module build support for the davinci gpio driver Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Nicolas Frayer <nfrayer@baylibre.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-09gpiolib: of: Integrate of_gpiochip_init_valid_mask() into ↵Andy Shevchenko
gpiochip_init_valid_mask() In preparation to complete fwnode switch, integrate of_gpiochip_init_valid_mask() into gpiochip_init_valid_mask(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-09gpiolib: of: Prepare of_gpiochip_add() / of_gpiochip_remove() for fwnodeAndy Shevchenko
GPIO library is getting rid of of_node, fwnode should be utilized instead. Prepare of_gpiochip_add() / of_gpiochip_remove() for fwnode. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-09gpiolib: remove devm_fwnode_get_[index_]gpiod_from_child()Dmitry Torokhov
Now that there are no more users of these APIs in the kernel we can remove them. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-09leds: lgm-sso: switch to using devm_fwnode_gpiod_get()Dmitry Torokhov
devm_fwnode_get_gpiod_from_child() is going away as the name is too unwieldy, let's switch to using the new devm_fwnode_gpiod_get(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-09leds: gpio: switch to using devm_fwnode_gpiod_get()Dmitry Torokhov
devm_fwnode_get_gpiod_from_child() is going away as the name is too unwieldy, let's switch to using the new devm_fwnode_gpiod_get(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-07gpio: hisi: Add initial device tree supportWeilong Chen
Add support for HiSilicon GPIO controller in embedded platform, which boot from devicetree. Signed-off-by: Weilong Chen <chenweilong@huawei.com> Acked-by: Jay Fang <f.fangjian@huawei.com> Reviewed-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-07dt-bindings: gpio: add entry for hisilicon,ascend910-gpioWeilong Chen
Add the new compatible for HiSilicon gpio controller driver. Signed-off-by: Weilong Chen <chenweilong@huawei.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-07gpio: Add Generic regmap GPIO conversion to the TODO listAndy Shevchenko
It's actually preferable to use Generic regmap GPIO over other simple approaches. Add a TODO item for that. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-04gpiolib: of: add polarity quirk for Freescale PCIe controllerDmitry Torokhov
Bindings for Freescale PCIe controller use a separate property called "reset-gpio-active-high" to control polarity of its reset line, add it to the list of quirks in gpiolib so that gpiod API can be used in the driver. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-04gpiolib: of: factor out quirk setting polarity via separate propertyDmitry Torokhov
Several legacy bindings use a separate property to specify polarity of GPIOs instead of specifying it directly in the GPIO property. Factor out this code to make it easier to add more such cases. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-04gpiolib: of: Make use of device_match_of_node()Andy Shevchenko
Make use of device_match_of_node() instead of open coding its functionality. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-10-27gpio: pca9570: add slg7xl45106 supportShubhrajyoti Datta
Dialog semiconductors SLG7XL45106 is an 8-bit I2C GPO expander. The output port is controlled by a data byte with register address. Add a compatible string for the same. Also update the driver to write and read from it. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-10-27gpio: pca9570: add a platform data structureShubhrajyoti Datta
Add struct pca9570_platform_data for adding the platform data structure. Also modify the existing structs for pca9570 and pca9571 Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-10-27dt-bindings: gpio: pca9570: Add compatible for slg7xl45106Shubhrajyoti Datta
This patch adds compatible string for the SLG7XL45106, I2C GPO expander. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-10-26gpio: exar: Allow IO port accessAndy Shevchenko
It's possible that PCI device can provide an IO port resource for the device. regmap MMIO currently uses MMIO by default. With an additional flag we enable support for IO port accesses. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-10-26gpio: Add gpio latch driverSascha Hauer
This driver implements a GPIO multiplexer based on latches connected to other GPIOs. A set of data GPIOs is connected to the data input of multiple latches. The clock input of each latch is driven by another set of GPIOs. With two 8-bit latches 10 GPIOs can be multiplexed into 16 GPIOs. GPOs might be a better term as in fact the multiplexed pins are output only. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> [Bartosz: fixed the strange of_device_id formatting] Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-10-26dt-bindings: gpio: Add gpio-latch binding documentSascha Hauer
This adds a binding for a GPIO multiplexer driver based on latches connected to other GPIOs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-10-25gpiolib: cdev: Fix typo in kernel doc for struct lineAndy Shevchenko
When eflags has been renamed to the edflags, the kernel doc change were missed. Update kernel doc accordingly. Fixes: b1a92e94560d ("gpiolib: cdev: consolidate edge detector configuration flags") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Kent Gibson <warthog618@gmail.com>
2022-10-25gpiolib: acpi: Use METHOD_NAME__AEI macro for acpi_walk_resourcesXiang Yang
Using the METHOD_NAME__AEI macro instead of using "_AEI" directly. Signed-off-by: Xiang Yang <xiangyang3@huawei.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-10-25gpio: pci-idio-16: Utilize the idio-16 GPIO libraryWilliam Breathitt Gray
The ACCES PCI-IDIO-16 device is part of the ACCES IDIO-16 family, so the idio-16 GPIO library module is selected and utilized to consolidate code. Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-10-25gpio: 104-idio-16: Utilize the idio-16 GPIO libraryWilliam Breathitt Gray
The ACCES 104-IDIO-16 device is part of the ACCES IDIO-16 family, so the idio-16 GPIO library module is selected and utilized to consolidate code. Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-10-25gpio: idio-16: Introduce the ACCES IDIO-16 GPIO library moduleWilliam Breathitt Gray
Exposes consumer library functions to facilitate communication with devices within the ACCES IDIO-16 family such as the 104-IDIO-16 and the PCI-IDIO-16. A CONFIG_GPIO_IDIO_16 Kconfig option is introduced by this patch. Modules wanting access to these idio-16 library functions should select this Kconfig option and import the GPIO_IDIO_16 symbol namespace. Cc: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-10-25gpio: ftgpio010: use device name for gpiochip name & labelJeremy Kerr
Currently, we use just the fixed string "FTGPIO010" as the gpiochip name for ftgpio010 drivers. Because it's fixed, this means we cannot distinguish multiple ftgpio010 devices present on a single system. This change uses the dev_name() instead, which should be unique between multiple instances. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-10-20gpiolib: of: add a quirk for reset line polarity for Himax LCDsDmitry Torokhov
Existing DTS that use legacy (non-standard) property name for the reset line "gpios-reset" also specify incorrect polarity (0 which maps to "active high"). Add a quirk to force polarity to "active low" so that once driver is converted to gpiod API that pays attention to line polarity it will work properly. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-10-20gpiolib: of: add quirk for phy reset polarity for Freescale EthernetDmitry Torokhov
Bindings for Freescale Fast Ethernet Controller use a separate property "phy-reset-active-high" to specify polarity of its phy gpio line. To allow converting the driver to gpiod API we need to add this quirk to gpiolib. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-10-20gpiolib: of: factor out code overriding gpio line polarityDmitry Torokhov
There are several instances where we use a separate property to override polarity specified in gpio property. Factor it out into a separate function. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-10-20gpiolib: of: add a quirk for legacy names in MOXA ART RTCDmitry Torokhov
The driver is using non-standard "gpio-rtc-data", "gpio-rtc-sclk", and "gpio-rtc-reset" names for properties describing its gpios. In preparation to converting to the standard naming ("rtc-*-gpios") and switching the driver to gpiod API add a quirk to gpiolib to keep compatibility with existing DTSes. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-10-20gpiolib: of: add a quirk for reset line for Cirrus CS42L56 codecDmitry Torokhov
The controller is using non-standard "cirrus,gpio-nreset" name for its reset gpio property, whereas gpiod API expects "<name>-gpios". Add a quirk so that gpiod API will still work on unmodified DTSes. Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-10-20gpiolib: of: add a quirk for reset line for Marvell NFC controllerDmitry Torokhov
The controller is using non-standard "reset-n-io" name for its reset gpio property, whereas gpiod API expects "<name>-gpios". Add a quirk so that gpiod API will still work on unmodified DTSes. Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-09 22:15:54 +0000