summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-29power: supply: sbs-battery: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED supportSebastian Reichel
Add support for reporting the SBS battery's condition flag to userspace using the new "Calibration required" health status. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-29power: supply: sbs-battery: add MANUFACTURE_DATE supportSebastian Reichel
Expose the battery's manufacture date to userspace. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-29power: supply: sbs-battery: add ↵Sebastian Reichel
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT/VOLTAGE_MAX support Expose maximum charge current/voltage information requested by the battery. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-29power: supply: sbs-battery: Improve POWER_SUPPLY_PROP_TECHNOLOGY supportSebastian Reichel
This reads the battery chemistry from the battery chip instead of incorrectly hardcoding the type to be Li-Ion. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-29power: supply: sbs-battery: add POWER_SUPPLY_PROP_CURRENT_AVG supportSebastian Reichel
Expose averaged current information, which is part of the SBS standard and should be supported by all batteries. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-29power: supply: sbs-battery: add PEC supportSebastian Reichel
SBS batteries optionally have support for PEC. This enables PEC handling based on the implemented SBS version as suggested by the standard. The support for PEC is re-evaluated when the battery is hotplugged into the system, since there might be systems supporting batteries from different SBS generations. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-29power: supply: sbs-battery: simplify read_read_string_dataSebastian Reichel
The SBS battery implements SMBus block reads. Currently the driver "emulates" this by doing an I2C byte read for the length followed by an I2C block read. The I2C subsystem actually provides a proper API for doing SMBus block reads, which can and should be used instead. The current implementation does not properly handle packet error checking (PEC). This change requires, that I2C bus drivers support I2C_M_RECV_LEN or directly provide the SMBus API to access device manufacturer and model name. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-29power: supply: sbs-battery: add POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN supportSebastian Reichel
Add support for reporting the MaxError register from battery fuel gauges following the smart battery standard. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-28power: supply: sbs-battery: Add TI BQ20Z65 supportSebastian Reichel
Add support for BQ20Z65 manufacturer data to the sbs-battery driver. Implementation has been verified using the public TRM available from [0] and tested using a GE Flex 3S2P battery. [0] http://www.ti.com/lit/pdf/sluu386 Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-28power: supply: core: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIREDSebastian Reichel
Some battery fuel gauges know when the battery needs to be recalibrated before providing usable values. This should be reported via the health property. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-28power: supply: core: add manufacture date propertiesSebastian Reichel
Some smart batteries store their manufacture date, which is useful to identify the battery and/or to know about the cell quality. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-28power: supply: core: add capacity error margin propertySebastian Reichel
Add a property for reporting the error margin expected by fuel gauge chips. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-28kobject: increase allowed number of uevent variablesSebastian Reichel
SBS battery driver exposes 32 power supply properties now, which will result in uevent failure on (un)plugging the battery. Other drivers (e.g. bq27xxx) are also coming close to this limit, so increase it. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-28power: supply: Make bd9995x_chip_reset staticSamuel Zou
Fix the following sparse warning: drivers/power/supply/bd99954-charger.c:1028:6: warning: symbol 'bd9995x_chip_reset' was not declared. The bd9995x_chip_reset() has only one call site within bd99954-charger.c It should be static Fixes: 0902f8366491 ("power: supply: Support ROHM bd99954 charger") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Samuel Zou <zou_wei@huawei.com> Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-28power: charger: max14577: Add proper dt-compatible stringsMarek Szyprowski
Add device tree compatible strings and create proper modalias structures to let this driver load automatically if compiled as module, because max14577 MFD driver creates MFD cells with such compatible strings. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-28Merge tag 'tags/ib-mfd-iio-power-v5.8' into psy-nextSebastian Reichel
This merges the MP2629 battery charge management immutable branch between MFD, IIO and power-supply due for the v5.8 merge window into power-supply for-next branch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-28power: reset: syscon-reboot: Add parental syscon supportSerge Semin
Since normally syscon-reboot block is supposed to be a part of a system controller, lets look for the syscon regmap in a parental DT node if regmap property isn't specified. DT binding from now considers the regmap property as deprecated. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-28dt-bindings: power: reset: Unrequire regmap property in syscon-reboot nodeSerge Semin
Since normally syscon-reboot block is supposed to be a part of a system controller, lets mark the regmap property as deprecated and recommend the syscon-reboot node to be a sub-node of SYSCON. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-26MAINTAINERS: Add entry for mp2629 Battery Charger driverSaravanan Sekar
Add MAINTAINERS entry for Monolithic Power Systems mp2629 Charger driver. Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-26power: supply: mp2629: Add impedance compensation configSaravanan Sekar
Allows the user to compensate the intrinsic resistance of the battery to accelerate the charging cycle. Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-26power: supply: Add support for mps mp2629 battery chargerSaravanan Sekar
The mp2629 provides switching-mode battery charge management for single-cell Li-ion or Li-polymer battery. Driver supports the access/control input source and battery charging parameters. Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-26iio: adc: mp2629: Add support for mp2629 ADC driverSaravanan Sekar
Add support for 8-bit resolution ADC readings for input power supply and battery charging measurement. Provides voltage, current readings to mp2629 power supply driver. Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-26mfd: mp2629: Add support for mps battery chargerSaravanan Sekar
mp2629 is a highly-integrated switching-mode battery charge management device for single-cell Li-ion or Li-polymer battery. Add MFD core enables chip access for ADC driver for battery readings, and a power supply battery-charger driver Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-26dt-bindings: mfd: Add document bindings for mp2629Saravanan Sekar
Add device tree binding information for mp2629 mfd driver. Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-17dt-bindings: power: Convert bq27xxx dt to yamlDan Murphy
Convert the bq27xxx.txt to yaml format CC: Pali Rohár <pali@kernel.org> CC: Andrew F. Davis <afd@ti.com> Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-12power: supply: bq24190_charger: convert to use i2c_new_client_device()Wolfram Sang
Move away from the deprecated API in this comment. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: bq25890: implement INPUT_CURRENT_LIMIT propertyMichał Mirosław
Report REG00.IINLIM value as INPUT_CURRENT_LIMIT property. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: bq25890: implement PRECHARGE_CURRENT propertyMichał Mirosław
Report configured precharge current. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: bq25890: implement CHARGE_TYPE propertyMichał Mirosław
Report charging type based on recently read state. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: bq25890: update state on property readMichał Mirosław
Edge interrupts from the charger may be lost or stuck in fault mode since probe(). Check if something changed everytime userspace wants some data. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: bq25890: fix ADC mode configurationMichał Mirosław
Datasheet describes two modes for reading ADC measurements: 1. continuous, 1 Hz - enabled and started by CONV_RATE bit 2. one-shot - triggered by CONV_START bit In continuous mode, CONV_START is read-only and signifies an ongoing conversion. Change the code to follow the datasheet and really disable continuous mode for power saving. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: bq25890: use proper CURRENT_NOW property for I_BATMichał Mirosław
Charge Current is more apropriately reflected by CURRENT_NOW property (measured current) than CONSTANT_CURRENT_VOLTAGE (configured CC-phase current limit). Fix the reference and make the sign reflect direction of the current. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: supply: max17040: Correct voltage readingJonathan Bakker
According to the datasheet available at (1), the bottom four bits are always zero and the actual voltage is 1.25x this value in mV. Since the kernel API specifies that voltages should be in uV, it should report 1250x the shifted value. 1) https://datasheets.maximintegrated.com/en/ds/MAX17040-MAX17041.pdf Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: supply: olpc_battery: fix the power supply nameLubomir Rintel
The framework is unhappy about them, because it uses the names in sysfs attributes: power_supply olpc-ac: hwmon: 'olpc-ac' is not a valid name attribute, please fix power_supply olpc-battery: hwmon: 'olpc-battery' is not a valid name attribute, please fix See also commit 648cd48c9e56 ("hwmon: Do not accept invalid name attributes") and commit 74d3b6419772 ("hwmon: Relax name attribute validation for new APIs"). Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: supply: smb347-charger: Add delay before getting IRQSTATDavid Heidelberg
This delay-fix is picked up from downstream driver, we measured that 25 - 35 ms delay ensure that we get required data. Tested on SMB347 on Nexus 7 2012. Otherwise IRQSTAT_E fails to provide correct information. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: supply: smb347-charger: IRQSTAT_D is volatileDmitry Osipenko
Fix failure when USB cable is connected: smb347 2-006a: reading IRQSTAT_D failed Fixes: 1502cfe19bac ("smb347-charger: Fix battery status reporting logic for charger faults") Tested-by: David Heidelberg <david@ixit.cz> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: supply: KConfig cleanup default nMatti Vaittinen
The "default n" is not needed as it is, well, default. Clean the KConfig by removing "default n". Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: supply: Fix Kconfig help text indentiationMatti Vaittinen
Indent the help text as explained in Documentation/process/coding-style.rst Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: supply: Support ROHM bd99954 chargerMatti Vaittinen
The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion secondary battery intended to be used in space-constraint equipment such as Low profile Notebook PC, Tablets and other applications. BD99954 provides a Dual-source Battery Charger, two port BC1.2 detection and a Battery Monitor. Support ROHM BD99954 Charger IC. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10dt_bindings: ROHM BD99954 ChargerMatti Vaittinen
The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion secondary battery. Intended to be used in space-constraint equipment such as Low profile Notebook PC, Tablets and other applications. BD99954 provides a Dual-source Battery Charger, two port BC1.2 detection and a Battery Monitor. Document the DT bindings for BD99954 Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: supply: add battery parametersMatti Vaittinen
Add parsing of new device-tree battery bindings. - trickle-charge-current-microamp - precharge-upper-limit-microvolt - re-charge-voltage-microvolt - over-voltage-threshold-microvolt Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10dt-bindings: battery: add new battery parametersMatti Vaittinen
Add: - trickle-charge-current-microamp: Some chargers have 3 charging stages. First one when battery is almost empty is often called as trickle-charge. Last state when battery has been "woken up" is usually called as fast-charge. In addition to this some chargers have a 'middle state' which ROHM BD99954 data-sheet describes as pre-charge. Some batteries can benefit from this 3-phase charging [citation needed]. Introduce trickle-charge-current-microamp so that batteries can give charging current limit for all three states. - precharge-upper-limit-microvolt: When battery voltage has reached certain limit we change from trickle-charge to next charging state (pre-charge for BD99954). Allow battery to specify this limit. - re-charge-voltage-microvolt: Allow giving a battery specific voltage limit for chargers which can automatically re-start charging when battery has discharghed down to this limit. - over-voltage-threshold-microvolt Allow specifying voltage threshold after which the battery is assumed to be faulty. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: supply: bd70528: use linear rangesMatti Vaittinen
Change the bd70528 to use common linear_range code instead of implementing a copy of it in this driver. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10Merge tag 'tags/linear-ranges-lib' into psy-nextSebastian Reichel
lib: Add linear ranges helper library and start using it Series extracts a "linear ranges" helper out of the regulator framework. Linear ranges helper is intended to help converting real-world values to register values when conversion is linear. I suspect this is useful also for power subsystem and possibly for clk. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: reset: ltc2952: remove unused variableHongbo Yao
Fix gcc '-Wunused-but-set-variable' warning: drivers/power/reset/ltc2952-poweroff.c:97:16: warning: variable ‘overruns’ set but not used [-Wunused-but-set-variable] unsigned long overruns; Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Hongbo Yao <yaohongbo@huawei.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: supply: lp8788: Fix an error handling path in 'lp8788_charger_probe()'Christophe JAILLET
In the probe function, in case of error, resources allocated in 'lp8788_setup_adc_channel()' must be released. This can be achieved easily by using the devm_ variant of 'iio_channel_get()'. This has the extra benefit to simplify the remove function and to axe the 'lp8788_release_adc_channel()' function which is now useless. Fixes: 98a276649358 ("power_supply: Add new lp8788 charger driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-09dt-bindings: power: reset: Convert syscon-reboot-mode to DT schemaSerge Semin
Modern device tree bindings are supposed to be created as YAML-files in accordance with dt-schema. This commit replaces SYSCON reboot-mode legacy bare text bindings with YAML file. As before the bindings file states that the corresponding dts node is supposed to be compatible "syscon-reboot-mode" device and necessarily have an offset property to determine which register from the regmap is supposed to keep the mode on reboot. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-09power: supply: cw2015: Make some symbols staticChenTao
Fix the following warning: drivers/power/supply/cw2015_battery.c:96:5: warning: 'cw_update_profile' was not declared. Should it be static? drivers/power/supply/cw2015_battery.c:712:1: warning: 'cw_bat_pm_ops' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: ChenTao <chentao107@huawei.com> Acked-by: Tobias Schramm <t.schramm@manjaro.org> Tested-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-09power: bq25890: unlock on error paths in bq25890_resume()Dan Carpenter
We introduced some new locking here, but need to update the error paths so they unlock before returning. Fixes: 72d9cd9cdc18 ("power: bq25890: protect view of the chip's state") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-08regulator: use linear_ranges helperMatti Vaittinen
Change the regulator helpers to use common linear_ranges code. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/64f01d5e381b8631a271616b7790f9d5640974fb.1588944082.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-08 10:34:35 +0000