summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-04drm/amdgpu: Disable MCBP from soc21 for SRIOVYiqing Yao
[why] Start from soc21, CP does not support MCBP, so disable it. [how] Used amgpu_mcbp flag alone instead of checking if is in SRIOV to enable/disable MCBP. Only set flag to enable on asic_type prior to soc21 in SRIOV. Signed-off-by: Yiqing Yao <yiqing.yao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-04drm/amdgpu: Clean up soc21 early init for SRIOVYiqing Yao
Use virt_init_setting instead of per ip version setting. Signed-off-by: Yiqing Yao <yiqing.yao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-04drm/amdgpu: extend halt_if_hws_hang to MESGraham Sider
Hang on MES timeout if halt_if_hws_hang is set to 1. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-04drm/amdkfd: update GFX11 CWSR trap handlerJay Cornwall
With corresponding FW change fixes issue where triggering CWSR on a workgroup with waves in s_barrier wouldn't lead to a back-off and therefore cause a hang. Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Tested-by: Graham Sider <Graham.Sider@amd.com> Acked-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Graham Sider <Graham.Sider@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display (gcc13): fix enum mismatchJiri Slaby (SUSE)
rn_vbios_smu_set_dcn_low_power_state() produces a valid warning with gcc-13: drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.c:237:6: error: conflicting types for 'rn_vbios_smu_set_dcn_low_power_state' due to enum/integer mismatch; have 'void(struct clk_mgr_internal *, enum dcn_pwr_state)' drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.h:36:6: note: previous declaration of 'rn_vbios_smu_set_dcn_low_power_state' with type 'void(struct clk_mgr_internal *, int)' I.e. the type of the 2nd parameter of rn_vbios_smu_set_dcn_low_power_state() in the declaration is int, while the definition spells enum dcn_pwr_state. Synchronize them to the latter (and add a forward enum declaration). Cc: Martin Liska <mliska@suse.cz> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: 3.2.210Aric Cyr
DC version 3.2.210 brings along the following: - Investigate tool reported FCLK P-state deviations - Fix null pointer issues found in emulation - Add DSC delay factor workaround - Round up DST_after_scaler to nearest int - Use forced DSC bpp in DML - Fix DCN32 DSC delay calculation - Add a debug option HBR2CP2520 over TPS4 - Stop waiting for vblank during pipe programming - Modify checks to enable TPS3 pattern when required - Remove rate check from pixel rate divider update - Check validation passed after applying pipe split changes - Update DML formula - Don't enable ODM + MPO - Include virtual signal to set k1 and k2 values - Reinit DPG when exiting dynamic ODM Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Investigate tool reported FCLK P-state deviationsNevenko Stupar
[Why] Fix for some of the tool reported modes for FCLK P-state deviations and UCLK P-state deviations that are coming from DSC terms and/or Scaling terms causing MinActiveFCLKChangeLatencySupported and MaxActiveDRAMClockChangeLatencySupported incorrectly calculated in DML for these configurations. Reviewed-by: Chaitanya Dhere <Chaitanya.Dhere@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Fix null pointer issues found in emulationCharlene Liu
[why] fix null point issues found in emulation Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Add DSC delay factor workaroundGeorge Shen
[Why] Certain 4K high refresh rate modes requiring DSC are exhibiting top of screen underflow corruption. Increasing the DSC delay by a factor of 6 percent stops the underflow for most use cases. [How] Multiply DSC delay requirement in DML by a factor. Add debug option to make this DSC delay factor configurable. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Round up DST_after_scaler to nearest intGeorge Shen
[Why] The DST_after_scaler value that DML spreadsheet outputs is generally the driver value round up to the nearest int. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Use forced DSC bpp in DMLGeorge Shen
[Why] DSC config is calculated separately from DML calculations. DML should use these separately calculated DSC params. The issue is that the calculated bpp is not properly propagated into DML. [How] Correctly used forced_bpp value in DML. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Fix DCN32 DSC delay calculationGeorge Shen
[Why] DCN32 DSC delay calculation had an unintentional integer division, resulting in a mismatch against the DML spreadsheet. [How] Cast numerator to double before performing the division. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: [FW Promotion] Release 0.0.141.0Anthony Koo
- Add flag as a status read back that indicates back to back flips detected during psr. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Add a debug option HBR2CP2520 over TPS4Leo Chen
[Why & How] There are cases when we may need to override the hardcoded TPS4 test pattern. Added parameters and config option to be able to allow this. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Stop waiting for vblank during pipe programmingMartin Leung
[why and how] This line was originally removed for a compliance issue, but then reverted as it caused a fringe underflow case. However, the addition of this line caused a underflow regression when subVP is on, and it needs to be removed again. We plan to fix subvp underflow and then re-add in this line. After that, we will investigate what to do next for the compliance issue. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Modify checks to enable TPS3 pattern when requiredIswara Nagulendran
[HOW&WHY] Checking if both DSC and FEC supported from sink and source before going with TPS3 pattern during link training. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Iswara Nagulendran <iswara.nagulendran@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Remove rate check from pixel rate divider updateTaimur Hassan
[Why] This check is not needed, and can cause CRC mismatch. [How] Remove check and early exit from divider update. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Check validation passed after applying pipe split changesDillon Varone
[WHY?] Validation can fail for configurations that were previously supported, by only changing parameters such as the DET allocations, which is currently unexpected. [HOW?] Add a check that validation passes after applying pipe split related changes. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Update DML formulaCharlene Liu
[why] This is to update SW DML implementation. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Don't enable ODM + MPOAlvin Lee
[Description] Driver doesn't support ODM + MPO Reviewed-by: Dillon Varone <Dillon.Varone@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Include virtual signal to set k1 and k2 valuesEric Bernstein
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Reinit DPG when exiting dynamic ODMDillon Varone
[WHY] DPG must be returned to initialized state when pipe is disabled. [HOW] Reinit DPG on unused pipes when exiting dynamic ODM. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: drop vblank_lock from struct amdgpu_display_managerHamza Mahfooz
As of commit 09a5df6c444c ("drm/amd/display: Fix multi-display support for idle opt workqueue"), vblank_lock is no longer being used. So, don't init it in amdgpu_dm_init() and remove it from struct amdgpu_display_manager. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amdkfd: Remove unused variableMa Jun
kfd_topology_device->cache_count is not used by other fucntions, so remove it. Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amdgpu: Skip program gfxhub_v3_0_3 system aperture registers under SRIOVYifan Zha
[Why] gfxhub_v3_0_3 system aperture registers are removed from RLCG register access range. [How] Skip access gfxhub_v3_0_3 system aperture registers under SRIOV VF. These registers will be programmed on host side. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amdgpu: Skip access SDMA0_F32_CNTL in sdma_v6_0_enable under SRIOVYifan Zha
[Why] SDMA0_F32_CNTL is a PF_only regitser which will be blocked by L1. RLCG will not program the register as well. [How] Skip to program SDMA0_F32_CNTL under SRIOV VF. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amdgpu: Skip access GRBM_CNTL under SRIOV on gfx_v11Yifan Zha
[Why] GRBM_CNTL is a PF_only register on gfx_v11. RLCG interface will return "out of range" under SRIOV VF. [How] Skip access GRBM_CNTL under gfx_v11 SRIOV VF. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amdgpu: Disable GPU reset on SRIOV before remove pci.Gavin Wan
The recent change brought a bug on SRIOV envrionment. It caused unloading amdgpu failed on Guest VM. The reason is that the VF FLR was requested while unloading amdgpu driver, but the VF FLR of SRIOV sequence is wrong while removing PCI device. For SRIOV, the guest driver should not trigger the whole XGMI hive to do the reset. Host driver control how the device been reset. Fixes: f5c7e7797060 ("drm/amdgpu: Adjust removal control flow for smu v13_0_2") Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Gavin Wan <Gavin.Wan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amdgpu: Enable GFX RAS feature for gfx v11_0_3Candice Li
v1: Support gfx ras feature enablement for gfx v11_0_3. v2: Update function name and error message. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: Modify mismatched function nameJiapeng Chong
No functional modification involved. drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:615: warning: expecting prototype for setup_subvp_dmub_command(). Prototype was for populate_subvp_cmd_pipe_info() instead. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2587 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: make wake_up_aux_channel staticJiapeng Chong
This symbol is not used outside of dc_link_dp.c, so marks it static. drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:5230:16: warning: no previous prototype for function 'wake_up_aux_channel'. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2581 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdkfd: Cleanup kfd_dev structMukul Joshi
Cleanup kfd_dev struct by removing ddev and pdev as both drm_device and pci_dev can be fetched from amdgpu_device. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Tested-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: disable GFXOFF during compute for GFX11Graham Sider
Temporary workaround to fix issues observed in some compute applications when GFXOFF is enabled on GFX11. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd: Fail the suspend if resources can't be evictedMario Limonciello
If a system does not have swap and memory is under 100% usage, amdgpu will fail to evict resources. Currently the suspend carries on proceeding to reset the GPU: ``` [drm] evicting device resources failed [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <vcn_v3_0> failed -12 [drm] free PSP TMR buffer [TTM] Failed allocating page table [drm] evicting device resources failed amdgpu 0000:03:00.0: amdgpu: MODE1 reset amdgpu 0000:03:00.0: amdgpu: GPU mode1 reset amdgpu 0000:03:00.0: amdgpu: GPU smu mode1 reset ``` At this point if the suspend actually succeeded I think that amdgpu would have recovered because the GPU would have power cut off and restored. However the kernel fails to continue the suspend from the memory pressure and amdgpu fails to run the "resume" from the aborted suspend. ``` ACPI: PM: Preparing to enter system sleep state S3 SLUB: Unable to allocate memory on node -1, gfp=0xdc0(GFP_KERNEL|__GFP_ZERO) cache: Acpi-State, object size: 80, buffer size: 80, default order: 0, min order: 0 node 0: slabs: 22, objs: 1122, free: 0 ACPI Error: AE_NO_MEMORY, Could not update object reference count (20210730/utdelete-651) [drm:psp_hw_start [amdgpu]] *ERROR* PSP load kdb failed! [drm:psp_resume [amdgpu]] *ERROR* PSP resume failed [drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* resume of IP block <psp> failed -62 amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_resume failed (-62). PM: dpm_run_callback(): pci_pm_resume+0x0/0x100 returns -62 amdgpu 0000:03:00.0: PM: failed to resume async: error -62 ``` To avoid this series of unfortunate events, fail amdgpu's suspend when the memory eviction fails. This will let the system gracefully recover and the user can try suspend again when the memory pressure is relieved. Reported-by: post@davidak.de Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2223 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27Revert "drm/amd/display: Limit max DSC target bpp for specific monitors"Hamza Mahfooz
This reverts commit 55eea8ef98641f6e1e1c202bd3a49a57c1dd4059. This quirk is now handled in the DRM core, so we can drop all of the internal code that was added to handle it. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: use max_dsc_bpp in amdgpu_dmHamza Mahfooz
Since, the quirk is handled in the DRM core now, we can use that value instead of the internal value. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/edid: add a quirk for two LG monitors to get them to work on 10bpcHamza Mahfooz
The LG 27GP950 and LG 27GN950 have visible display corruption when trying to use 10bpc modes. So, to fix this, cap their maximum DSC target bitrate to 15bpp. Suggested-by: Roman Li <roman.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: Add EEPROM I2C address support for ip discoveryCandice Li
1. Update EEPROM_I2C_MADDR_SMU_13_0_0 to EEPROM_I2C_MADDR_54H 2. Add EEPROM I2C address support for smu v13_0_0 and v13_0_10. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: Update ras eeprom support for smu v13_0_0 and v13_0_10Candice Li
Enable RAS EEPROM support for smu v13_0_0 and v13_0_10. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: Optimize TA load/unload/invoke debugfs interfacesCandice Li
1. Add a function pointer structure ta_funcs to psp context 2. Make the interfaces generic to all TAs 3. Leverage exisitng TA context and remove unused functions 4. Fix return code bugs v2: Add comments for ta funcs macros and correct typo Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Candice Li <candice.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: Optimize RAS TA initialization and TA unload funcsCandice Li
1. Save TA unload psp response status 2. Add RAS TA loading status check for initializaiton 3. Drop RAS context teardown to allow RAS TA to be reloaded Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Candice Li <candice.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram()Yang Li
./drivers/gpu/drm/amd/amdkfd/kfd_migrate.c:985:58-62: ERROR: p is NULL but dereferenced. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2549 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: prevent memory leakgehao
In dce6(0,1,4)_create_resource_pool and dce80_create_resource_pool the allocated memory should be released if construct pool fails. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: gehao <gehao@kylinos.cn> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: move remaining FPU code to dml folderAo Zhong
pipes[pipe_cnt].pipe.src.dcc_fraction_of_zs_req_luma = 0; pipes[pipe_cnt].pipe.src.dcc_fraction_of_zs_req_chroma = 0; these two operations in dcn32/dcn32_resource.c still need to use FPU, This will cause compilation to fail on ARM64 platforms because -mgeneral-regs-only is enabled by default to disable the hardware FPU. Therefore, imitate the dcn31_zero_pipe_dcc_fraction function in dml/dcn31/dcn31_fpu.c, declare the dcn32_zero_pipe_dcc_fraction function in dcn32_fpu.c, and move above two operations into this function. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Ao Zhong <hacc1225@gmail.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: move remaining FPU code to dml folderAo Zhong
In the process of enabling DCN support for arm64, I found that the dcn10_resource_construct_fp function in dcn10/dcn10_resource.c still needs to use FPU. This will cause compilation to fail on ARM64 platforms because -mgeneral-regs-only is enabled by default to disable the hardware FPU. So move dcn10_resource_construct_fp from dcn10 folder to dml/dcn10 folder to enable hardware FPU for that function. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ao Zhong <hacc1225@gmail.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: remove deprecated MES version varsGraham Sider
MES scheduler and kiq versions are stored in mes.sched_version and mes.kiq_version, respectively, which are read from a register after their queues are initialized. Remove mes.ucode_fw_version and mes.data_fw_version which tried to read this versioning info from the firmware headers (which don't contain this information). Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Jack Xiao <Jack.Xiao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: correct MES debugfs versionsGraham Sider
Use mes.sched_version, mes.kiq_version for debugfs as mes.ucode_fw_version does not contain correct versioning information. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Jack Xiao <Jack.Xiao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: Move the mutex_lock to protect the return status of ↵Alan Liu
securedisplay command buffer [Why] Before we call psp_securedisplay_invoke(), we call psp_prep_securedisplay_cmd_buf() to prepare and initialize the command buffer. However, we didn't use the mutex_lock to protect the status of command buffer. So when multiple threads are using the command buffer, after thread A return from psp_securedisplay_invoke() and the command buffer status is set to SUCCESS, another thread B may call psp_prep_securedisplay_cmd_buf() and initialize the status to FAILURE again, and cause Thread A to get a failure return status. [How] Move the mutex_lock out of psp_securedisplay_invoke() to its caller to cover psp_prep_securedisplay_cmd_buf() and the code checking the return status of command buffer. Signed-off-by: Alan Liu <HaoPing.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: remove ras_error_status parameter for UMC poison handlerTao Zhou
Make the code simpler. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: add RAS poison handling for MCATao Zhou
For MCA poison, if unmap queue fails, only gpu reset should be triggered without page retirement handling, MCA notifier will do it. v2: handle MCA poison consumption in umc_poison_handler directly. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-11 00:43:08 +0000