summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-15ARM: dts: gemini: Set DIR-685 SPI CS as active lowLinus Walleij
The SPI to the display on the DIR-685 is active low, we were just saved by the SPI library enforcing active low on everything before, so set it as active low to avoid ambiguity. Link: https://lore.kernel.org/r/20190715202101.16060-1-linus.walleij@linaro.org Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-07Merge tag 'samsung-dt-5.3-3' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.3, third round 1. Fix imprecise abort on Exynos4210 caused by newly added Mali nodes, 2. Reorganize Mali nodes under /soc, 3. Adjust buck regulators voltages on Arndale Octa and Odroid XU3/XU4 family to sane values. * tag 'samsung-dt-5.3-3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Adjust buck[78] regulators to supported values on Arndale Octa ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family ARM: dts: exynos: Move Mali400 GPU node to "/soc" ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210 Link: https://lore.kernel.org/r/20190707180115.5562-1-krzk@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-04Merge tag 'sunxi-dt64-for-5.3-round-2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner DT64 Changes for 5.3 - Round 2 One extra change wiring up the interrupt line for the external RTC chip on the Pine H64. * tag 'sunxi-dt64-for-5.3-round-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h6: Pine H64: Add interrupt line for RTC Link: https://lore.kernel.org/r/20190704065326.GA19010@wens.csie.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-01Merge tag 'v5.3-rockchip-dts64-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt New boards the Khadas Edge family of sbcs and the Hugsun X99 TV box, both based on rk3399. Small improvements for RockPi, Sapphire and rk3328-roc-cc boards. Improvements for the thermal handling on rk3399 as well as the rock960 board. rk3399 dwc3 clock updates and a small start of the dtsi for the new rk3399pro (the one with the connected npu). * tag 'v5.3-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Fix USB3 Type-C on rk3399-sapphire arm64: dts: rockchip: Update DWC3 modules on RK3399 SoCs arm64: dts: rockchip: enable rk3328 watchdog clock arm64: dts: rockchip: Add support for Hugsun X99 TV Box arm64: dts: rockchip: Define values for the IPA governor for rock960 arm64: dts: rockchip: Fix multiple thermal zones conflict in rk3399.dtsi arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCs arm64: dts: rockchip: improve rk3328-roc-cc rgmii performance. arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards arm64: dts: rockchip: Enable HDMI audio on Rock Pi Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-01Merge tag 'v5.3-rockchip-dts32-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Display support for rk3228/rk3229 (up to hdmi output) and more love for rk3288-veyron boards. * tag 'v5.3-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add display nodes for rk322x ARM: dts: rockchip: fix vop iommu-cells on rk322x clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 Revert "ARM: dts: rockchip: set PWM delay backlight settings for Minnie" ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron ARM: dts: rockchip: Configure BT_HOST_WAKE as wake-up signal on veyron Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-01Merge tag 'sprd-dt-v5.3-rc1' of https://github.com/lyrazhang/linux into arm/dtOlof Johansson
Spreadtrum's devicetree for v5.3-rc1 This tag contains only two patches for updating coresight compatible string. * tag 'sprd-dt-v5.3-rc1' of https://github.com/lyrazhang/linux: arm64: dts: sc9860: Update coresight DT bindings arm64: dts: sc9836: Update coresight DT bindings Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-01ARM: dts: exynos: Adjust buck[78] regulators to supported values on Arndale OctaKrzysztof Kozlowski
The datasheet of S2MPS11 PMIC is slightly non-consistent in buck[78] voltage regulators values. 1. The voltage tables for configuring their registers mention range of voltages: 0.750 V to 3.55 V, 2. The constrains in electrical specifications say output voltage range to be different (buck7: 1.2 V to 1.5 V, buck8: 1.8 V to 2.1 V). Adjust the ranges to match the electrical specifications to stay on the safe side. Anyway these regulators stay at default value so this should not have effect. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-07-01ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid ↵Krzysztof Kozlowski
XU3 family The datasheet of S2MPS11 PMIC is slightly non-consistent in buck[78] voltage regulators values. 1. The voltage tables for configuring their registers mention range of voltages: 0.750 V to 3.55 V, 2. The constrains in electrical specifications say output voltage range to be different (buck7: 1.2 V to 1.5 V, buck8: 1.8 V to 2.1 V). Adjust the ranges to match the electrical specifications to stay on the safe side. Also change the name of regulators to match reality. Anyway these regulators stay at default value so this should not have effect. Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-07-01ARM: dts: exynos: Move Mali400 GPU node to "/soc"Marek Szyprowski
Mali400 GPU hardware module is a standard hardware module integrated to Exynos3210/4210/4412 SoCs, so it should reside under the "/soc" node. The only SoC components which are placed in the DT root, are those, which are a part of CPUs: like ARM architected timers and ARM performance measurement units. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-07-01ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210Marek Szyprowski
The PMU module of Mali400 GPU is optional and it looks that it is not present on Exynos4210, because any access to its registers causes external abort. This patch removes "pmu" interrupt for Exynos4210 SoCs, so the driver will skip the PMU module. This fixes following fault during kernel boot: Unhandled fault: imprecise external abort (0x1406) at 0x00000000 (lima_pmu_init) from [<c059e6f8>] (lima_device_init+0x244/0x5a0) (lima_device_init) from [<c059e40c>] (lima_pdev_probe+0x7c/0xd8) (lima_pdev_probe) from [<c05afcb8>] (platform_drv_probe+0x48/0x9c) (platform_drv_probe) from [<c05ad594>] (really_probe+0x1c4/0x400) (really_probe) from [<c05ad988>] (driver_probe_device+0x78/0x1b8) (driver_probe_device) from [<c05add30>] (device_driver_attach+0x58/0x60) (device_driver_attach) from [<c05ade34>] (__driver_attach+0xfc/0x160) (__driver_attach) from [<c05ab650>] (bus_for_each_dev+0x68/0xb4) (bus_for_each_dev) from [<c05ac734>] (bus_add_driver+0x104/0x20c) (bus_add_driver) from [<c05aece0>] (driver_register+0x78/0x10c) (driver_register) from [<c0103214>] (do_one_initcall+0x8c/0x430) (do_one_initcall) from [<c0f01328>] (kernel_init_freeable+0x3c8/0x4d0) (kernel_init_freeable) from [<c0ac3aa0>] (kernel_init+0x8/0x10c) (kernel_init) from [<c01010b4>] (ret_from_fork+0x14/0x20) The PMU module seems to work fine on Exynos4412 SoCs, so the patch also moves the interrupt definitions to exynos4210.dtsi and exynos4412.dtsi respectively, to keep only the common part in exynos4.dtsi. Fixes: 13efd80acaa4 ("ARM: dts: exynos: Add GPU/Mali 400 node to Exynos4") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-06-27Merge tag 'qcom-dts-for-5.3-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm Device Tree Changes for v5.3 * Add vibrator motor for MSM8974 based Fairphone 2 * tag 'qcom-dts-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: msm8974-FP2: Add vibration motor Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-27Merge tag 'qcom-arm64-for-5.3-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 Updates for v5.3 Part 2 * Add SDM845 Cheza support * Add TSENS controller and thermal zones for QCS404 * tag 'qcom-arm64-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: qcs404: Add missing space for cooling-cells property arm64: dts: qcom: sdm845-cheza: add initial cheza dt arm64: dts: qcom: qcs404: Add thermal zones for each sensor arm64: dts: qcom: qcs404: Add tsens controller Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-28arm64: dts: qcom: qcs404: Add missing space for cooling-cells propertyNiklas Cassel
There should be a space both before and after the equal sign. Add a missing space for the cooling cells property. Fixes: f48cee3239a1 ("arm64: dts: qcom: qcs404: Add thermal zones for each sensor") Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Acked-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-06-27arm64: dts: rockchip: Fix USB3 Type-C on rk3399-sapphireVicente Bergas
Before this patch, the Type-C port on the Sapphire board is dead. If setting the 'regulator-always-on' property to 'vcc5v0_typec0' then the port works for about 4 seconds at start-up. This is a sample trace with a memory stick plugged in: 1.- The memory stick LED lights on and kernel reports: [ 4.782999] scsi 0:0:0:0: Direct-Access USB DISK PMAP PQ: 0 ANSI: 4 [ 5.904580] sd 0:0:0:0: [sdb] 3913344 512-byte logical blocks: (2.00 GB/1.87 GiB) [ 5.906860] sd 0:0:0:0: [sdb] Write Protect is off [ 5.908973] sd 0:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 5.909122] sd 0:0:0:0: [sdb] No Caching mode page found [ 5.911214] sd 0:0:0:0: [sdb] Assuming drive cache: write through [ 5.951585] sdb: sdb1 [ 5.954816] sd 0:0:0:0: [sdb] Attached SCSI removable disk 2.- 4 seconds later the memory stick LED lights off and kernel reports: [ 9.082822] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_DCP_CHARGER 3.- After a minute the kernel reports: [ 71.666761] usb 5-1: USB disconnect, device number 2 It has been checked that, although the LED is off, VBUS is present. If, instead, the dr_mode is changed to host and the phy-supply changed accordingly, then it works. It has only been tested in host mode. Signed-off-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-27arm64: dts: rockchip: Update DWC3 modules on RK3399 SoCsEnric Balletbo i Serra
As per binding documentation [1], the DWC3 core should have the "ref", "bus_early" and "suspend" clocks. As explained in the binding, those clocks are required for new platforms but not for existing platforms before commit fe8abf332b8f ("usb: dwc3: support clocks and resets for DWC3 core"). However, as those clocks are really treated as required, this ends with having some annoying messages when the "rockchip,rk3399-dwc3" is used: [ 1.724107] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2 [ 1.731893] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2 [ 2.495937] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2 [ 2.647239] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2 In order to remove those annoying messages, update the DWC3 hardware module node and add all the required clocks. With this change, both, the glue node and the DWC3 core node, have the clocks defined, but that's not really a problem and there isn't a side effect on do this. So, we can get rid of the annoying get clk error messages. [1] Documentation/devicetree/bindings/usb/dwc3.txt Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-27arm64: dts: rockchip: enable rk3328 watchdog clockLeonidas P. Papadakos
Add the missing clock property for the watchdog on rk3328. Signed-off-by: Leonidas P. Papadakos <papadakospan@gmail.com> [set wdt node to always enabled, as it is not board-specific] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-27Merge branch 'v5.3-shared/clk-ids' into v5.3-armsoc/dts64Heiko Stuebner
2019-06-27ARM: dts: rockchip: add display nodes for rk322xJustin Swartz
Add display_subsystem, hdmi_phy, vop, and hdmi device nodes plus a few hdmi pinctrl entries to allow for HDMI output. Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za> [added assigned-clock settings for hdmiphy output] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-27Merge branch 'v5.3-shared/clk-ids' into v5.3-armsoc/dts32Heiko Stuebner
2019-06-27ARM: dts: rockchip: fix vop iommu-cells on rk322xJustin Swartz
iommu-cells obviously needs to start with a "#". Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-27clk: rockchip: add clock id for hdmi_phy special clock on rk3228Heiko Stuebner
Add the needed clock id to enable clock settings from devicetree. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Justin Swartz <justin.swartz@risingedge.co.za>
2019-06-27clk: rockchip: add clock id for watchdog pclk on rk3328Heiko Stuebner
Needed to export that added clock. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-26Merge tag 'samsung-dt64-5.3' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM64 changes for v5.3 Add Mali nodes to Exynos5433 and Exynos7. * tag 'samsung-dt64-5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Add GPU/Mali T760 node to Exynos7 arm64: dts: exynos: Add GPU/Mali T760 node to Exynos5433 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-26Merge tag 'samsung-dt-5.3-2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.3, second round 1. Add camera flash to Galaxy S3 boards, 2. Fix PMU affinity interrupt warning on Exynos4, 3. Improve regulator configuration on Odroid XU3/XU4/HC1 family and Arndale Octa by disabling unneeded regulators and adding suspend configuration. The suspend configuration brings significant reduce of energy usage in Suspend to RAM (e.g. 120 -> ~7 mA on Odroid HC1). 4. Add Mali nodes to Exynos3 and Exynos4. * tag 'samsung-dt-5.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Add GPU/Mali 400 node to Exynos4 ARM: dts: exynos: Add GPU/Mali 400 node to Exynos3250 dt-bindings: gpu: mali: Add Samsung compatibles for Midgard and Utgard ARM: dts: exynos: Use proper regulator for eMMC memory on Arndale Octa ARM: dts: exynos: Add regulator suspend configuration to Odroid XU3/XU4/HC1 family ARM: dts: exynos: Add regulator suspend configuration to Arndale Octa board ARM: dts: exynos: Disable unused buck10 regulator on Odroid HC1 board ARM: dts: exynos: Fix language typo and indentation ARM: dts: exynos: Add PMU interrupt affinity to Exynos4 boards ARM: dts: exynos: Add flash support to Galaxy S3 boards Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-26Merge tag 'uniphier-dt64-v5.3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt UniPhier ARM64 SoC DT updates for v5.3 - Migrate to the new binding for the Denali NAND controller - Use reserved-memory node instead of /memreserve/ for the secure memory area * tag 'uniphier-dt64-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: arm64: dts: uniphier: add reserved-memory for secure memory arm64: dts: uniphier: update to new Denali NAND binding Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-26Merge tag 'uniphier-dt-v5.3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt UniPhier ARM SoC DT updates for v5.3 - Migrate to the new binding for the Denali NAND controller * tag 'uniphier-dt-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: ARM: dts: uniphier: update to new Denali NAND binding Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-26Merge tag 'v5.2-next-dts64' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt - convert arm boads to json-schema mt8183: - add base SoC and evaluation board - add cpacity-dmips-mhz - add pinctrl, auxadc, spi, and efuse nodes * tag 'v5.2-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: mt8183: add efuse and Mediatek Chip id node to read arm64: dts: mt8183: add spi node arm64: dts: mt8183: Add auxadc device node arm64: dts: mt8183: add pinctrl device node arm64: dts: mt8183: add capacity-dmips-mhz arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile dt-bindings: arm: Convert MediaTek board/soc bindings to json-schema Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-27arm64: dts: rockchip: Add support for Hugsun X99 TV BoxVivek Unune
Add devicetree support for Hugsun X99 TV Box based on RK3399 SoC Tested with LibreElec running kernel v5.1.2. Following peripherals tested and work: Peripheral works: - UART2 debug - eMMC - USB 3.0 port - USB 2.0 port - sdio, sd-card - HDMI - Ethernet - WiFi/BT Not tested: - Type-C port - OPTICAL - IR Signed-off-by: Vivek Unune <npcomplete13@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-27arm64: dts: rockchip: Define values for the IPA governor for rock960Daniel Lezcano
Currently the default thermal values for the rk3399-rock960 board is inherited from the generic definition in rk3399.dtsi. In order to ensure the rock960 has more room for througput before being capped by the thermal framework and is correctly supported by the IPA governor, let's define the power values and the right trip points for better performances: - sustainable power is tested to be 1550mW - increase the first mitigation point to 75°C in order to get better performances - the first trip point is 65°C in order to let the IPA to collect enough data for the PID regulation when it reaches 75°C - restrict the cooling device to the big CPUs as the little CPUs contribution to the heating effect can be considered negligible The intelligent power allocator PID coefficient to be set in sysfs are: k_d: 0 k_po: 79 k_i: 10 k_pu: 50 Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-27arm64: dts: rockchip: Fix multiple thermal zones conflict in rk3399.dtsiDaniel Lezcano
Currently the common thermal zones definitions for the rk3399 assumes multiple thermal zones are supported by the governors. This is not the case and each thermal zone has its own governor instance acting individually without collaboration with other governors. As the cooling device for the CPU and the GPU thermal zones is the same, each governors take different decisions for the same cooling device leading to conflicting instructions and an erratic behavior. As the cooling-maps is about to become an optional property, let's remove the cpu cooling device map from the GPU thermal zone. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-27arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCsJianqun Xu
This patch adds core dtsi file for Rockchip RK3399Pro SoCs, include rk3399.dtsi. Also enable pciei0/pcie_phy for AP to talk to NPU part inside SoC. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-27arm64: dts: rockchip: improve rk3328-roc-cc rgmii performance.Peter Geis
Currently the rk3328-roc-cc ethernet is enabled using "snps,force_thresh_dma_mode". While this works, the performance leaves a lot to be desired. A previous attempt to improve performance used "snps,txpbl = <0x4>". This also allowed networking to function, but performance varied between boards. This patch takes that one step further. Set txpbl and rxpbl to 0x4. This can also be accomplished with "snps,pbl =<0x4>" which affects both. Also set "snps,aal" which forces address aligned DMA mode. Fixes: 4bc4d6013b7f (arm64: dts: rockchip: fix rk3328-roc-cc gmac2io stability issues) Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Leonidas P. Papadakos <papadakospan@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-27Revert "ARM: dts: rockchip: set PWM delay backlight settings for Minnie"Matthias Kaehlcke
This reverts commit 288ceb85b505c19abe1895df068dda5ed20cf482. The commit assumes that the minnie panel is a AUO B101EAN01.1 (LVDS interface), however it is a AUO B101EAN01.8 (eDP interface). The eDP panel doesn't need the 200 ms delay. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-26ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyronDouglas Anderson
This is the other half of the hacky solution from commit f497ab6b4bb8 ("ARM: dts: rockchip: Configure BT_HOST_WAKE as wake-up signal on veyron"). Specifically the LPM driver that the Broadcom Bluetooth expects to have (but is missing in mainline) has two halves of the equation: BT_HOST_WAKE and BT_DEV_WAKE. The BT_HOST_WAKE (which was handled in the previous commit) is the one that lets the Bluetooth wake the system up. The BT_DEV_WAKE (this patch) tells the Bluetooth that it's OK to go into a low power mode. That means we were burning a bit of extra power in S3 without this patch. Measurements are a bit noisy, but it appears to be a few mA worth of difference. NOTE: Though these pins don't do much on systems with Marvell Bluetooth, downstream kernels set it on all veyron boards so we'll do the same. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-25arm64: dts: qcom: sdm845-cheza: add initial cheza dtRob Clark
This is essentialy a squash of a bunch of history of cheza dt updates from chromium kernel, some of which were themselves squashes of history from older chromium kernels. I don't claim any credit other than wanting to more easily boot upstream kernel on cheza to have an easier way to test upstream driver work ;-) I've added below in Cc tags all the original actual authors (apologies if I missed any). Cc: Douglas Anderson <dianders@chromium.org> Cc: Sibi Sankar <sibis@codeaurora.org> Cc: Evan Green <evgreen@chromium.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Venkat Gopalakrishnan <venkatg@codeaurora.org> Cc: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-06-25ARM: dts: msm8974-FP2: Add vibration motorLuca Weiss
Add a node describing the vibration motor on the Fairphone 2. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Andy Gross <agross@kernel.org>
2019-06-25arm64: dts: qcom: qcs404: Add thermal zones for each sensorAmit Kucheria
qcs404 has 10 sensors connected to the single TSENS IP. Define a thermal zone for each of those sensors to expose the temperature of each zone. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-06-25arm64: dts: qcom: qcs404: Add tsens controllerAmit Kucheria
qcs404 has a single TSENS IP block with 10 sensors. The calibration data is stored in an eeprom (qfprom) that is accessed through the nvmem framework. We add the qfprom node to allow the tsens sensors to be calibrated correctly. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-06-26arm64: dts: uniphier: add reserved-memory for secure memoryMasahiro Yamada
The memory regions specified by /memreserve/ are passed to early_init_dt_reserve_memory_arch() with nomap=false, so it is not suitable for reserving memory for Trusted Firmware-A etc. Use the more robust /reserved-memory node with the no-map property to prevent the kernel from mapping it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-26arm64: dts: uniphier: update to new Denali NAND bindingMasahiro Yamada
With commit d8e8fd0ebf8b ("mtd: rawnand: denali: decouple controller and NAND chips"), the Denali NAND controller driver migrated to the new controller/chip representation. Update DT for it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-26ARM: dts: uniphier: update to new Denali NAND bindingMasahiro Yamada
With commit d8e8fd0ebf8b ("mtd: rawnand: denali: decouple controller and NAND chips"), the Denali NAND controller driver migrated to the new controller/chip representation. Update DT for it. In the new binding, the number of connected chips are described in DT instead of run-time probed. I added just one chip to the reference boards, where we do not know if the on-board NAND device is a single chip or multiple chips. If we added too many chips into DT, it would end up with the timeout error in nand_scan_ident(). I changed all the pinctrl properties to use the single CS. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-25Merge tag 'amlogic-dt64' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.3 Highlights: - new SoC: S922X (G12B family, A73/A53 big.LITTLE) - new board: Hardkernel odroid-N2 (SoC: G12B S922X) - add/use ethernet PHY interrupt/reset lines - G12A: add/enable audio, PWM, IR, i2c, SD/eMMC, WiFi, bluetooth, network - gxbb-vega-s95 board: fix WiFi/BT, enable more peripherals * tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (79 commits) arm64: dts: meson: g12a: x96-max: add the Ethernet PHY interrupt line arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY interrupt line arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings arm64: dts: meson: g12a: x96-max: fix the Ethernet PHY reset line arm64: dts: meson: g12a: sort sdio nodes correctly arm64: dts: meson-g12a-x96-max: add sound card arm64: dts: meson-g12b-odroid-n2: add sound card arm64: dts: meson: sei510: add sound card arm64: dts: meson: sei510: add max98357a DAC ASoC: meson: add tohdmitx DT bindings arm64: dts: meson: g12a: add the GPIO interrupt controller arm64: dts: meson-g12a-x96-max: bump bluetooth bus speed to 2Mbaud/s arm64: dts: meson-g12a-sei510: bump bluetooth bus speed to 2Mbaud/s arm64: dts: meson-g12a-x96-max: add 32k clock to bluetooth node arm64: dts: meson-g12a-sei510: add 32k clock to bluetooth node arm64: dts: meson-g12a-sei510: Enable Wifi SDIO module arm64: dts: meson-g12a-x96-max: Enable Wifi SDIO Module arm64: dts: meson-g12a-x96-max: add support for sdcard and emmc arm64: dts: meson: g12a: add SDIO controller ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'imx-dt64-5.3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 device tree changes for 5.3: - Add i.MX8MQ based Librem5 devkit support. - Add SNVS power key support for i.MX8MQ and i.MX8MM. - Add GPIO alias for imx8mq and i.MX8QXP. - A series from Daniel Baluta to add SAI devices and enable audio support for imx8mm-evk board. - Add DDR performance monitor unit support for i.MX8QXP. - Add irqsteer interrupt controller device for i.MX8MQ SoC. - Add CPU speed grading and all OPPs for i.MX8MM and i.MX8MQ. - Add OCOTP device node for i.MX8QXP. - Various device addition for LS1028A: SATA, qDMA, USB, Mali DP500 and temperature sensor. - Random minor coding style improvements. * tag 'imx-dt64-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits) arm64: dts: librem5: enable the SNVS power key arm64: dts: librem5: Limit the USB to 5V arm64: dts: imx8qxp: added ddr performance monitor nodes arm64: dts: imx8qxp: sort LSIO subsystem devices arm64: dts: imx8qxp: sort alias alphabetically arm64: dts: imx8qxp: Add lsio_mu13 node arm64: dts: imx8mm-evk: Enable audio codec wm8524 arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit arm64: dts: fsl: ls1028a: Add qDMA node arm64: dts: imx8mm: Enable SNVS power key according to board design arm64: dts: imx8mq-evk: Enable SNVS power key arm64: dts: ls1028a: add crypto node arm64: dts: ls1028a: Add temperature sensor node arm64: dts: imx8mm: Move gic node into soc node arm64: dts: imx8mm: Move usbphy out of soc node arm64: dts: imx8mm: Pass the 'ranges' property arm64: dts: imx8mm: Pass a unit name for the 'soc' node arm64: dts: fsl: imx8mq: add the snvs power key node arm64: dts: ls1028a: fix watchdog device node arm64: dts: ls1028a: Enable sata. ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'imx-dt-5.3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm32 DT changes for 5.3: - New board support: iMX6-based Kontron SMARC-sAMX6i, i.MX7D based Meerkat96 board, and NXP LS1021A-TSN board. - A series from Andrey Smirnov to update vf610-zii-dev and imx7d-zii-rpu2 board, fixing UART2 pin assignment and stdout-path, adding QSPI device, and dropping unused pinmux. - Update imx6sl and imx6qdl device tree to assign corresponding clocks instead of dummy clock. - Update i.MX6/7 boards from NXP to assign corresponding power supply for LDOs. - Update i.MX6/7 device trees to enable SNVS poweroff key support according to board design. - Update coresight DT binding for i.MX7 according to consolidations for CoreSight replicator and funnel. - A series from Marek Vasut to update M53Menlo board on various devices like UART, USB, ethernet PHY, GPIOs etc. - Enable USBOTG support for imx7ulp and evk board. - A series from Peter Robinson to update imx6sx-udoo board, switching to SPDX License Identifier, enabling I2C devices and bluetooth support. - Add video capture support for i.MX53 and imx53-smd board. - Add PXP device for i.MX6UL. - Other random small updates on various boards. * tag 'imx-dt-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (46 commits) ARM: dts: imx7ulp-evk: enable USBOTG1 support ARM: dts: imx7ulp: add imx7ulp USBOTG1 support ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module ARM: dts: imx7d-zii-rpu2: Drop unused pinmux entries ARM: dts: imx7d-zii-rpu2: Fix incorrrect 'stdout-path' ARM: dts: Add support for 96Boards Meerkat96 board ARM: dts: imx6ul: Add PXP node ARM: dts: imx6sll: Enable SNVS poweroff according to board design ARM: dts: imx7s: Enable SNVS power key according to board design ARM: dts: imx6sll: Enable SNVS power key according to board design ARM: dts: imx6ul: Enable SNVS power key according to board design ARM: dts: imx6sx: Enable SNVS power key according to board design ARM: dts: imx6qdl: Enable SNVS power key according to board design ARM: dts: imx53: Bind CPLD on M53Menlo ARM: dts: Introduce the NXP LS1021A-TSN board ARM: dts: imx6ull-colibri: enable UHS-I for USDHC1 ARM: dts: imx7d: Update cpufreq OPP table ARM: dts: imx6sx-udoo-neo: add bluetooth config to uart3 ARM: dts: imx6sx-udoo-neo: enable i2c-2 and i2c-4 for onboard sensors ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'imx-dt-clkdep-5.3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX DT changes with new clock for 5.3: - This is a set of device tree changes with new clocks - adding clock info for i.MX8 GPIO and SNVS RTC device. * tag 'imx-dt-clkdep-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mq: add clock for SNVS RTC node arm64: dts: imx8mm: add clock for SNVS RTC node arm64: dts: imx8mm: add clock for GPIO node clk: imx8m: Add GIC clock dt-bindings: clock: imx8m: Add GIC clock clk: imx8mm: add SNVS clock to clock tree dt-bindings: clock: imx8mm: Add SNVS clock clk: imx8mq: add SNVS clock to clock tree dt-bindings: clock: imx8mq: Add SNVS clock clk: imx8mm: add GPIO clocks to clock tree dt-bindings: clock: imx8mm: Add GPIO clocks Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'imx-bindings-5.3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX DT bindings for 5.3: - Add vendor prefix for Purism SPC. - Add bindings for i.MX8MQ EVK Board, Purism Librem5 devkit and i.MX7 Meerkat96 Board. - Add LS1028A specific compatible into qDMA bindings doc. - Move Emtrion i.MX6 board bindings to schema. - Add missing schemas for i.MX7ULP and i.MX1/31/35 bindings. * tag 'imx-bindings-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: fsl: Add missing schemas for i.MX1/31/35 dt-bindings: arm: fsl: Add back missing i.MX7ULP binding dt-bindings: arm: Move Emtrion i.MX6 board bindings to schema dt-bindings: arm: fsl: Add the imx8mq boards dt-bindings: Add an entry for Purism SPC dt-bindings: fsl-qdma: Add LS1028A qDMA bindings dt-bindings: arm: Document 96Boards Meerkat96 devicetree binding Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'pxa-dt-5.3' of https://github.com/rjarzmik/linux into arm/dtOlof Johansson
This is the pxa devicetree changes for 5.3 cycle : - devicetree pinmux support for bias on pxa3xx - devicetree pinmux bias usage for raumfeld * tag 'pxa-dt-5.3' of https://github.com/rjarzmik/linux: ARM: dts: pxa300-raumfeld-speaker-one: add channel output mapping for STA320 ARM: pxa: raumfeld-common: fix comments in gpio_keys pinctrl node ARM: pxa: raumfeld-controller: add pinctrl for charger pins ARM: pxa: raumfeld-controller: fix 'dock detect' GPIO key ARM: pxa3xx: dts: Add defines for pinctrl-single,bias-pull{up,down} Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'at91-5.3-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT for 5.3 - switch to new sckc bindings - convert soc bindings to json-schema * tag 'at91-5.3-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: dt-bindings: arm: Convert Atmel board/soc bindings to json-schema ARM: dts: at91: sama5d3: switch to new sckc bindings ARM: dts: at91: at91sam9rl: switch to new sckc bindings ARM: dts: at91: at91sam9g45: switch to new sckc bindings ARM: dts: at91: at91sam9x5: switch to new sckc bindings ARM: dts: at91sam9261ek: remove unused chosen nodes Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'tegra-for-5.3-arm64-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Device tree changes for v5.3-rc1 This contains the bulk of the Tegra changes this cycle. It has a bunch of improvements across almost all boards. These are mostly small and not too exciting additions. Most notably perhaps is the continuation of Jetson Nano support, which is now mostly on feature parity with Jetson TX1. * tag 'tegra-for-5.3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (28 commits) arm64: tegra: Enable PCIe slots in P2972-0000 board arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT arm64: tegra: Add PEX DPD states as pinctrl properties arm64: tegra: Enable ACONNECT, ADMA and AGIC arm64: tegra: Add ACONNECT, ADMA and AGIC nodes arm64: tegra: Sort device tree nodes alphabetically arm64: tegra: Fix Jetson Nano GPU regulator arm64: tegra: Update Jetson TX1 GPU regulator timings arm64: tegra: Fix AGIC register range arm64: tegra: Add INA3221 channel info for Jetson TX2 arm64: tegra: Enable PWM on Jetson Nano arm64: tegra: Enable CPU sleep on Jetson Nano arm64: tegra: Add ID EEPROMs on Jetson Nano arm64: tegra: Add ID EEPROM for Jetson TX2 Developer Kit arm64: tegra: Add ID EEPROM for Jetson TX2 module arm64: tegra: Add ID EEPROM for Jetson TX1 Developer Kit arm64: tegra: Add ID EEPROM for Jetson TX1 module arm64: tegra: Don't use architected timer for suspend on Tegra210 arm64: tegra: Mark architected timer as always on arm64: tegra: Add pin control states for I2C on Tegra186 ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'stm32-dt-for-v5.3-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.3, round 1 Highlights: ---------- MPU part: -Add stm32mp157a-avenger board support: This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios) , 1024MB of DDR3 and STPMIC1A pmic . Several connections are available on this boards: 2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG, ethernet 10/100/1000, WiFi 5 GHz & 2.4GHz, ... -Add STMFX support en stm32mp157c-ev1 and enable joystick connected on it. -Add I2S and SAI support on stm32mp157c. -Add and enable support of Vivante GPU on stm32mp157 ED1 and DK1 boards (EV1 and DK2 inherit of it). -Add camera support: -Add DCMI support on stm32mp157c SOC -Enabled OV5640 camera support on stm32mp157c-ev1 board -Enable hdmi bridge sii9022 & display controller on stm32mp157c-dk1 board. MCU part: -Add STMFX support en stm32746g-eval and enable connections on it: leds and joystick * tag 'stm32-dt-for-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (27 commits) ARM: dts: stm32: replace rgmii mode with rgmii-id on stm32mp15 boards ARM: dts: stm32: Add Avenger96 devicetree support based on STM32MP157A dt-bindings: arm: stm32: Document Avenger96 devicetree binding dt-bindings: arm: stm32: Convert STM32 SoC bindings to DT schema ARM: dts: stm32: Add missing pinctrl definitions for STM32MP157 ARM: dts: stm32: add sai id registers to stm32mp157c ARM: dts: stm32: add power supply of rm68200 on stm32mp157c-ev1 ARM: dts: stm32: enable display on stm32mp157c-dk1 board ARM: dts: stm32: Add I2C 1 config for stm32mp157a-dk1 ARM: dts: stm32: enable OV5640 camera on stm32mp157c-ev1 board ARM: dts: stm32: add DCMI pins to stm32mp157c ARM: dts: stm32: add DCMI camera interface support on stm32mp157c ARM: dts: stm32: enable Vivante GPU support on stm32mp157a-dk1 board ARM: dts: stm32: enable Vivante GPU support on stm32mp157c-ed1 board ARM: dts: stm32: Add Vivante GPU support on STM32MP157c ARM: dts: stm32: add i2s pins muxing on stm32mp157 ARM: dts: stm32: add i2s support on stm32mp157c ARM: dts: stm32: add sai pins muxing on stm32mp157 ARM: dts: stm32: add sai support on stm32mp157c ARM: dts: stm32: add jedec compatible for nor flash on stm32mp157c-ev1 ... Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit (git 2.34.1) at 2025-09-10 18:21:54 +0000