summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-12-04ARM: mvebu: use the cpufreq-dt platform_data for independent clocksThomas Petazzoni
This commit adjusts the registration of the cpufreq-dt driver in the mvebu platform to indicate to the cpufreq driver that the platform has independent clocks for each CPU. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville
Johannes Berg <johannes@sipsolutions.net> says: "This time I have Felix's no-status rate control work, which will allow drivers to work better with rate control even if they don't have perfect status reporting. In addition to this, a small hwsim fix from Patrik, one of the regulatory patches from Arik, and a number of cleanups and fixes I did myself. Of note is a patch where I disable CFG80211_WEXT so that compatibility is no longer selectable - this is intended as a wake-up call for anyone who's still using it, and is still easily worked around (it's a one-line patch) before we fully remove the code as well in the future." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-04Merge tag 'nfc-next-3.19-1' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz <sameo@linux.intel.com> says: "NFC: 3.19 pull request This is the NFC pull request for 3.19. With this one we get: - NFC digital improvements for DEP support: Chaining, NACK and ATN support added. - NCI improvements: Support for p2p target, SE IO operand addition, SE operands extensions to support proprietary implementations, and a few fixes. - NFC HCI improvements: OPEN_PIPE and NOTIFY_ALL_CLEARED support, and SE IO operand addition. - A bunch of minor improvements and fixes for STMicro st21nfcb and st21nfca" Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-04Merge tag 'tegra-for-3.19-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt2 Pull "ARM: tegra: Device tree changes for v3.19" from Thierry Reding: The bulk of these changes add memory controller nodes for Tegra30, Tegra114 and Tegra124. The memory controller implements an IOMMU that the display controllers are attached to. This allows them to scan out physically non-contiguous framebuffers and removes one of the primary users of CMA. The only other change adds a new MIPI pad control bank to the pin controller on Tegra124. The corresponding driver patch for this went into v3.18 as: 3ccc11f6b82c pinctrl: tegra: Add MIPI pad control * tag 'tegra-for-3.19-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Enable IOMMU for display controllers on Tegra124 ARM: tegra: Enable IOMMU for display controllers on Tegra114 ARM: tegra: Enable IOMMU for display controllers on Tegra30 ARM: tegra: Add memory controller support for Tegra124 ARM: tegra: Add memory controller support for Tegra114 ARM: tegra: Add memory controller support for Tegra30 ARM: tegra: Add APB_MISC_GP as a MIPI pad control bank These additional commits are merged as dependencies: memory: Add NVIDIA Tegra memory controller support of: Add NVIDIA Tegra memory controller binding ARM: tegra: Move AHB Kconfig to drivers/amba amba: Add Kconfig file clk: tegra: Implement memory-controller clock powerpc/iommu: Rename iommu_[un]map_sg functions iommu: Improve error handling when setting bus iommu iommu: Do more input validation in iommu_map_sg() iommu: Add iommu_map_sg() function Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-04Merge tag 'tegra-for-3.19-iommu' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers Pull "ARM: tegra: IOMMU support for v3.19" from Thierry Reding: This adds the driver pieces required for IOMMU support on Tegra30, Tegra114 and Tegra124. * tag 'tegra-for-3.19-iommu' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: memory: Add NVIDIA Tegra memory controller support of: Add NVIDIA Tegra memory controller binding ARM: tegra: Move AHB Kconfig to drivers/amba amba: Add Kconfig file clk: tegra: Implement memory-controller clock powerpc/iommu: Rename iommu_[un]map_sg functions iommu: Improve error handling when setting bus iommu iommu: Do more input validation in iommu_map_sg() iommu: Add iommu_map_sg() function Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-04[media] stv090x: Some whitespace cleanupsMauro Carvalho Chehab
While writing changeset fdf1bc9fa2cf, I noticed some checkpatch complains about the CodingStyle for function parameters. So, clean them. While here, also removes uneeded "extern" from function prototype. No functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04[media] em28xx: checkpatch cleanup: whitespaces/new lines cleanupsMauro Carvalho Chehab
This patch is basically produced while testing a tool that Joe Perches sent upstream sometime ago: https://lkml.org/lkml/2014/7/11/794 I used it with those arguments: $ reformat_with_checkpatch.sh drivers/media/usb/em28xx/em28xx*.[ch] It actually produced 24 patches, with is too much, and showed interesting things: gcc produced different codes on most of the patches, even with just linespace changes. The total code data remained the same on all cases I checked though. Anyway, provided that we fold the resulting patches, this tool seems useful. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04arm64: amd-seattle: Fix PCI bus range due to SMMU limitationSuravee Suthikulpanit
Since PCIe is using SMMUv1 which only supports 15-bit stream ID, only 7-bit PCI bus id is used to specify stream ID. Therefore, we only limit the PCI bus range to 0x7f. Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-04soc: integrator: Add terminating entry for integrator_cm_matchAxel Lin
The of_device_id table is supposed to be zero-terminated. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-04MAINTAINERS: ARM Versatile Express platform, add missing patternPawel Moll
VE's reset driver lives at the third level of the directories: drivers/power/reset/vexpress-poweroff.c and wasn't matched by the */*/vexpress* pattern. Added additional pattern for all files at this level. This should be enough for a while... Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-04[media] si2168: add support for firmware files in new formatOlli Salonen
This patch adds support for new type of firmware versions of Si2168 chip. Old type: n x 8 bytes (all data, first byte seems to be 04 or 05) New type: n x 17 bytes (1 byte indicates len and max 16 bytes data) New version of TechnoTrend CT2-4400 drivers (http://www.tt-downloads.de/bda-treiber_4.3.0.0.zip) contains newer firmware for Si2168-B40 that is in the new format. It can be extracted with the following command: dd if=ttTVStick4400_64.sys ibs=1 skip=323872 count=6919 of=dvb-demod-si2168-b40-01.fw Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04[media] si2168: debug printout for firmware versionOlli Salonen
A debug printout for firmware version. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04Merge tag 'reset-for-3.19-2' of git://git.pengutronix.de/git/pza/linux into ↵Arnd Bergmann
next/drivers Pull "Reset controller changes for v3.19" from Philipp Zabel: This adds a new driver for the sti soc family, and creates a reset_control_status interface, which is added to the existing drivers. * tag 'reset-for-3.19-2' of git://git.pengutronix.de/git/pza/linux: reset: add socfpga_reset_status reset: sti: Document sti-picophyreset controllers bindings. reset: stih407: Add softreset, powerdown and picophy controllers reset: stih407: Add reset controllers DT bindings reset: add reset_control_status helper function Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-04[media] cx24117: Grammar s/if ... if/if ... is/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04[media] media: v4l2-image-sizes.h: correct the SVGA height definitionJosh Wu
SVGA height should be 600 not 680. Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04[media] tda18271: Fix identationMauro Carvalho Chehab
As reported by smatch: drivers/media/tuners/tda18271-common.c:176 tda18271_read_extended() warn: if statement not indented Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04Merge tag 'zynq-cleanup-for-3.19' of https://github.com/Xilinx/linux-xlnx ↵Arnd Bergmann
into next/cleanup Pull "arm: Xilinx Zynq cleanup patches for v3.19" from Michal Simek: - Remove unused file and declaration * tag 'zynq-cleanup-for-3.19' of https://github.com/Xilinx/linux-xlnx: ARM: zynq: Remove secondary_startup() declaration from header ARM: zynq: Actually remove hotplug.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-04[media] stv090x: remove export symbol for stv090x_set_gpio()Mauro Carvalho Chehab
Drivers that use dvb_attach can have just one exported symbol, or they will cause compilation breakages depending on the selected frontends. As Jim reported: drivers/built-in.o: In function `technisat_usb2_set_voltage': technisat-usb2.c:(.text+0x3b4919): undefined reference to `stv090x_set_gpio' make: *** [vmlinux] Error 1 That happens because, on his configuration, the configuration is: CONFIG_DVB_USB=y CONFIG_DVB_STV090x=m Luis proposed ar way to fix, but that would just force the STV090x to be selected, even if one wants to use a device with a different frontend. Instead, let's do the right thing: move set_gpio to the configuration structure and fill it during dvb_attach(). This way, the driver can still call it, and dvb_attach() will load stv090x module only if the device really needs it. Reported by: Jim Davis <jim.epost@gmail.com> Cc: Luis Rodriguez <mcgrof@suse.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04crypto: qat - fix problem with coalescing enable logicTadeusz Struk
Fixed issue reported by Dan Carpenter 410 if (adf_get_cfg_int(accel_dev, "Accelerator0", 411 ADF_ETRMGR_COALESCING_ENABLED_FORMAT, 412 bank_num, &coalesc_enabled) && coalesc_enabled) This condition is reversed, so it only enables coalescing on error. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-04Merge tag 'zynq-dt-for-3.19' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann
next/dt Pull "arm: Xilinx Zynq dt patches for v3.19" from Michal Simek: - Declare Digilent and vendor - Add Zybo board support - Fix VDMA documentation to be align with the driver * tag 'zynq-dt-for-3.19' of https://github.com/Xilinx/linux-xlnx: arm: dts: zynq: Add Digilent ZYBO board arm: dts: zynq: Move crystal freq. to board level doc: dt: vendor-prefixes: Add Digilent Inc Documentation: devicetree: Fix Xilinx VDMA specification Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-04Merge tag 'mvebu-soc-suspend-3.19' of git://git.infradead.org/linux-mvebu ↵Arnd Bergmann
into next/soc Pull "mvebu SoC suspend changes for v3.19" from Jason Cooper: - Armada 370/XP suspend/resume support - mvebu SoC driver suspend/resume support - irqchip - clocksource - mbus - clk * tag 'mvebu-soc-suspend-3.19' of git://git.infradead.org/linux-mvebu: ARM: mvebu: add SDRAM controller description for Armada XP ARM: mvebu: adjust mbus controller description on Armada 370/XP ARM: mvebu: add suspend/resume DT information for Armada XP GP ARM: mvebu: synchronize secondary CPU clocks on resume ARM: mvebu: make sure MMU is disabled in armada_370_xp_cpu_resume ARM: mvebu: Armada XP GP specific suspend/resume code ARM: mvebu: reserve the first 10 KB of each memory bank for suspend/resume ARM: mvebu: implement suspend/resume support for Armada XP clk: mvebu: add suspend/resume for gatable clocks bus: mvebu-mbus: provide a mechanism to save SDRAM window configuration bus: mvebu-mbus: suspend/resume support clocksource: time-armada-370-xp: add suspend/resume support irqchip: armada-370-xp: Add suspend/resume support Documentation: dt-bindings: minimal documentation for MVEBU SDRAM controller Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-04ARM: defconfig: imx_v6_v7_defconfig updatesDmitry Lavnikevich
This is a squash of several imx_v6_v7_defconfig update patches. - Enable tlv320aic3x audio codec by default (Phytec PBAB01 board) - Enable DS1307 rtc and gpio fan by default (TBS2910 board) - Select thermal related drivers - Add SNVS power off driver Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com> Signed-off-by: Soeren Moch <smoch@web.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-04Merge tag 'arm-soc/for-3.19/brcmstb-drivers' of ↵Arnd Bergmann
https://github.com/brcm/linux into next/drivers This pull request contains the following changes to the Broadcom GISB bus arbiter from Kevin Cernekee: - Extend brcmstb GISB bus driver to work on MIPS (currently ARM-only) and support 65nm and 40nm MIPS-based chips such as: BCM7038, BCM7400 and BCM7435 * tag 'arm-soc/for-3.19/brcmstb-drivers' of https://github.com/brcm/linux: bus: brcmstb_gisb: Add register offset tables for older chips bus: brcmstb_gisb: Look up register offsets in a table bus: brcmstb_gisb: Introduce wrapper functions for MMIO accesses bus: brcmstb_gisb: Make the driver buildable on MIPS Conflicts: drivers/bus/brcmstb_gisb.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-04ftracetest: Add --verbose option for showing echo outputMasami Hiramatsu
Add --verbose/-v option for showing echo output in testcases. This is good for checking the progress of testcases which take a longer time to run. To implement this feature, all the testcase failures are captured in ftracetest and send signal to set SIG_RESULT=FAIL. Link: http://lkml.kernel.org/r/20141204194123.7376.22964.stgit@localhost.localdomain Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-12-04KVM: s390: clean up return code handling in irq delivery codeJens Freimann
Instead of returning a possibly random or'ed together value, let's always return -EFAULT if rc is set. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-04KVM: s390: use atomic bitops to access pending_irqs bitmapJens Freimann
Currently we use a mixture of atomic/non-atomic bitops and the local_int spin lock to protect the pending_irqs bitmap and interrupt payload data. We need to use atomic bitops for the pending_irqs bitmap everywhere and in addition acquire the local_int lock where interrupt data needs to be protected. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-04ftracetest: Fix to show descriptions on dashMasami Hiramatsu
The ftracetest doesn't show testcase's descriptions when it is executed on dash. This fixes that to show the descriptions on dash correctly by passing it via a variable instead of directly passing the grep command output. Link: http://lkml.kernel.org/r/20141204194116.7376.78940.stgit@localhost.localdomain Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-12-04KVM: s390: some ext irqs have to clear the ext cpu addrDavid Hildenbrand
The cpu address of a source cpu (responsible for an external irq) is only to be stored if bit 6 of the ext irq code is set. If bit 6 is not set, it is to be zeroed out. The special external irq code used for virtio and pfault uses the cpu addr as a parameter field. As bit 6 is set, this implementation is correct. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-04[media] dvb-usb-dvbsky: add TechnoTrend CT2-4400 and CT2-4650 devices supportNibble Max
Signed-off-by: Nibble Max <nibble.max@gmail.com> Reviewed-by: Olli Salonen <olli.salonen@iki.fi> Tested-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04[media] cxusb: remove TechnoTrend CT2-4400 and CT2-4650 devicesNibble Max
Remove TechnoTrend CT2-4400 and CT2-4650 devices from cxusb. They are supported by dvb-usb-dvbsky driver in PATCH 3/3. Signed-off-by: Nibble Max <nibble.max@gmail.com> Reviewed-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04[media] dvb-usb-dvbsky: add T330 dvb-t2/t/c usb stick supportNibble Max
DVBSky T330 dvb-t2/t/c usb stick: 1>dvb frontend: SI2157A30(tuner), SI2168B40(demod) 2>usb controller: CY7C68013A Signed-off-by: Nibble Max <nibble.max@gmail.com> Reviewed-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04ARM: tegra: Enable IOMMU for display controllers on Tegra124Thierry Reding
Add iommus properties to the device tree nodes for the two display controllers found on Tegra124. This will allow the display controllers to map physically non-contiguous buffers to I/O virtual contiguous address spaces so that they can be used for scan-out. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-12-04ARM: tegra: Enable IOMMU for display controllers on Tegra114Thierry Reding
Add iommus properties to the device tree nodes for the two display controllers found on Tegra114. This will allow the display controllers to map physically non-contiguous buffers to I/O virtual contiguous address spaces so that they can be used for scan-out. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-12-04ARM: tegra: Enable IOMMU for display controllers on Tegra30Thierry Reding
Add iommus properties to the device tree nodes for the two display controllers found on Tegra30. This will allow the display controllers to map physically non-contiguous buffers to I/O virtual contiguous address spaces so that they can be used for scan-out. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-12-04ARM: tegra: Add memory controller support for Tegra124Thierry Reding
Add the memory controller and wire up the interrupt that is used to report errors. Provide a reference to the memory controller clock and mark the device as being an IOMMU by adding an #iommu-cells property. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-12-04ARM: tegra: Add memory controller support for Tegra114Thierry Reding
Add the device tree node for the memory controller found on Tegra114 SoCs. The memory controller integrates an IOMMU (called SMMU) as well as various knobs to tweak memory accesses by the various clients. The old IOMMU device tree node is collapsed into the memory controller node to more accurately describe the hardware. While this change is incompatible, the IOMMU driver has never had any users so the change is not going to cause any breakage. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-12-04ARM: tegra: Add memory controller support for Tegra30Thierry Reding
Collapses the old memory-controller and IOMMU device tree nodes into a single node to more accurately describe the hardware. While this is an incompatible change there are no users of the IOMMU on Tegra, even though a driver has existed for some time. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-12-04ARM: tegra: Add APB_MISC_GP as a MIPI pad control bankSean Paul
This patch adds the APB_MISC_GP_MIPI_PAD_CTRL_0 as a pin-control bank on Tegra124 so the new MIPI pad control group can be muxed between CSI and DSI_B. Signed-off-by: Sean Paul <seanpaul@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-12-04Merge branch 'for-3.19/iommu' into for-3.19/dtThierry Reding
2014-12-04workqueue: cosmetic update in rescuer_thread()Tejun Heo
rescuer_thread() caches &rescuer->scheduled in a local variable scheduled for convenience. There's one WARN_ON_ONCE() which was using &rescuer->scheduled directly. Replace it with the local variable. This patch causes no functional difference. Signed-off-by: Tejun Heo <tj@kernel.org>
2014-12-04memory: Add NVIDIA Tegra memory controller supportThierry Reding
The memory controller on NVIDIA Tegra exposes various knobs that can be used to tune the behaviour of the clients attached to it. Currently this driver sets up the latency allowance registers to the HW defaults. Eventually an API should be exported by this driver (via a custom API or a generic subsystem) to allow clients to register latency requirements. This driver also registers an IOMMU (SMMU) that's implemented by the memory controller. It is supported on Tegra30, Tegra114 and Tegra124 currently. Tegra20 has a GART instead. The Tegra SMMU operates on memory clients and SWGROUPs. A memory client is a unidirectional, special-purpose DMA master. A SWGROUP represents a set of memory clients that form a logical functional unit corresponding to a single device. Typically a device has two clients: one client for read transactions and one client for write transactions, but there are also devices that have only read clients, but many of them (such as the display controllers). Because there is no 1:1 relationship between memory clients and devices the driver keeps a table of memory clients and the SWGROUPs that they belong to per SoC. Note that this is an exception and due to the fact that the SMMU is tightly integrated with the rest of the Tegra SoC. The use of these tables is discouraged in drivers for generic IOMMU devices such as the ARM SMMU because the same IOMMU could be used in any number of SoCs and keeping such tables for each SoC would not scale. Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-12-04[media] media: exynos-gsc: fix build warningMauro Carvalho Chehab
Fixes following build warnings: gsc-core.c:350:17: warning: 'low_plane' may be used uninitialized gsc-core.c:371:31: warning: 'high_plane' may be used uninitialized Reported-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04[media] rtl2832_sdr: control ADCAntti Palosaari
Recent rtl28xxu patch I made moved demod ADC enable from power control to frontend control (due to slave demod support). Because of that we need call USB interface frontend control too in order to enable ADC. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04[media] v4l: vb2: Fix race condition in _vb2_fop_releaseLaurent Pinchart
The function releases the queue if the file being released is the queue owner. The check reads the queue->owner field without taking the queue lock, creating a race condition with functions that set the queue owner, such as vb2_ioctl_reqbufs() for instance. Fix this by moving the queue->owner check within the mutex protected section. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04[media] v4l: vb2: Fix race condition in vb2_fop_pollLaurent Pinchart
The vb2_fop_poll() implementation tries to be clever on whether it needs to lock the queue mutex by checking whether polling might start fileio. The test requires reading the q->num_buffer field, which is racy if we don't hold the queue mutex in the first place. Remove the extra cleverness and just lock the mutex. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04[media] smiapp: Support V4L2_SEL_TGT_NATIVE_SIZESakari Ailus
Add support for selection target V4L2_SEL_TGT_NATIVE_SIZE. It is equivalent of what V4L2_SEL_TGT_CROP_BOUNDS used to be. Support for V4L2_SEL_TGT_CROP_BOUNDS is still supported by the driver as a compatibility interface. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04[media] smiapp: Set left and top to zero for crop bounds selectionSakari Ailus
The fields were previously uninitialised, leaving the returned values to where the user had set them. This was never the intention. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04[media] v4l: Add input and output capability flags for native size settingSakari Ailus
Add input and output capability flags for setting native size of the device, and document them. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04[media] v4l: Add V4L2_SEL_TGT_NATIVE_SIZE selection targetSakari Ailus
The V4L2_SEL_TGT_NATIVE_SIZE target is used to denote e.g. the size of a sensor's pixel array. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04[media] v4l: Clean up sub-device format documentationSakari Ailus
The sub-device format documentation documented scaling configuration through formats. Instead the compose selection rectangle is elsewhere documented to be used for the purpose. Remove scaling related part of the documentation. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
generated by cgit (git 2.34.1) at 2025-09-21 08:33:22 +0000