summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-23drm/amdgpu/powerplay: add some documentation about memory clockAlex Deucher
We expose the actual memory controller clock rate in Linux, not the effective memory clock of the DRAMs. To translate it, it follows the following formula: Clock conversion (Mhz): HBM: effective_memory_clock = memory_controller_clock * 1 G5: effective_memory_clock = memory_controller_clock * 1 G6: effective_memory_clock = memory_controller_clock * 2 DRAM data rate (MT/s): HBM: effective_memory_clock * 2 = data_rate G5: effective_memory_clock * 4 = data_rate G6: effective_memory_clock * 8 = data_rate Bandwidth (MB/s): data_rate * vram_bit_width / 8 = memory_bandwidth Some examples: G5 on RX460: memory_controller_clock = 1750 Mhz effective_memory_clock = 1750 Mhz * 1 = 1750 Mhz data rate = 1750 * 4 = 7000 MT/s memory_bandwidth = 7000 * 128 bits / 8 = 112000 MB/s G6 on RX5600: memory_controller_clock = 900 Mhz effective_memory_clock = 900 Mhz * 2 = 1800 Mhz data rate = 1800 * 8 = 14400 MT/s memory_bandwidth = 14400 * 192 bits / 8 = 345600 MB/s Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23drm/amdgpu: Remove redundant NULL checkLi Heng
Fix below warnings reported by coccicheck: ./drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c:557:2-7: WARNING: NULL check before some freeing functions is not needed. Fixes: 4d55b0dd1cdd ("drm/amd/display: Add DCN3 CLK_MGR") Signed-off-by: Li Heng <liheng40@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23drm/amdgpu: move umc specific macros to headerJohn Clements
certain umc macros are common across umc versions Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23drm/amdgpu: update golden setting for sienna_cichlidLikun Gao
Update golden setting for sienna_cichlid. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23drm/amd/powerplay: correct smu message for vf modeLikun Gao
Set valid_in_vf to false for the message not support in vf mode on sienna cichlid. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23drm/amd/powerplay: add msg map for mode1 resetLikun Gao
Mapping Mode1Reset message for sienna_cichlid. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-23drm/amd/powerplay: skip invalid msg when smu set mp1 stateLikun Gao
Some asic may not support for some message of set mp1 state. If the return value of smu_send_smc_msg is -EINVAL, that means it failed to send msg to smc as it can not map an valid message for the ASIC. And with that case, smu_set_mp1_state should be skipped as those ASIC was in fact do not support for that. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-22drm/amdgpu/dc: Simplify drm_crtc_state::active checksMichel Dänzer
drm_atomic_crtc_check enforces that ::active can only be true if ::enable is as well. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-22drm/amd/powerplay: remove the dpm checking in the boot sequenceKenneth Feng
It's not necessary to retrieve the power features status when the asic is booted up the first time. This patch can have the features enablement status still checked in suspend/resume case and removed from the first boot up sequence. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-22drm/amd/amdgpu: Fix compiler warning in df driverTom St Denis
Fix this warning: CC [M] drivers/gpu/drm/amd/amdgpu/gfxhub_v1_1.o In file included from drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h:29, from drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.h:26, from drivers/gpu/drm/amd/amdgpu/amdgpu.h:43, from drivers/gpu/drm/amd/amdgpu/df_v3_6.c:23: drivers/gpu/drm/amd/amdgpu/df_v3_6.c: In function ‘df_v3_6_pmc_get_count’: ./include/drm/drm_print.h:487:2: warning: ‘hi_base_addr’ may be used uninitialized in this function [-Wmaybe-uninitialized] 487 | __drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__) | ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/df_v3_6.c:649:25: note: ‘hi_base_addr’ was declared here 649 | uint32_t lo_base_addr, hi_base_addr, lo_val = 0, hi_val = 0; | ^~~~~~~~~~~~ In file included from drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h:29, from drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.h:26, from drivers/gpu/drm/amd/amdgpu/amdgpu.h:43, from drivers/gpu/drm/amd/amdgpu/df_v3_6.c:23: ./include/drm/drm_print.h:487:2: warning: ‘lo_base_addr’ may be used uninitialized in this function [-Wmaybe-uninitialized] 487 | __drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__) | ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/df_v3_6.c:649:11: note: ‘lo_base_addr’ was declared here 649 | uint32_t lo_base_addr, hi_base_addr, lo_val = 0, hi_val = 0; Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-22drm/amdgpu: won't include gc and mmhub register headers in GMC blockHuang Rui
All gc/mmhub register access and operation should be in gfxhub/mmhub level. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-22drm/amdgpu: move get_invalidate_req function into gfxhub/mmhub levelHuang Rui
This patch is to move get_invalidate_req into gfxhub/mmhub level. It will avoid mismatch of the different gfxhub/mmhub register offsets and fields in the same gmc block. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-22drm/amdgpu: add vmhub funcs helper (v2)Huang Rui
This patch is to introduce vmhub funcs helper to add following callback (print_l2_protection_fault_status). Each GC/MMHUB register specific programming should be in gfxhub/mmhub level. v2: remove the condition of funcs assignment. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-22drm/amdgpu: abstract set_vm_fault_masks function to refine the programmingHuang Rui
This patch is to add set_vm_fault_masks helper to amdgpu_gmc to refine the original programming. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-22drm/amdgpu: add member to store vm fault interrupt masksHuang Rui
This patch adds a member in vmhub structure to store the vm fault interrupt masks for different version gfxhubs/mmhubs. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-22Revert "drm/amd/powerplay: drop unnecessary message support check"Changfeng
The below 3 messages are not supported on Renoir SMU_MSG_PrepareMp1ForShutdown SMU_MSG_PrepareMp1ForUnload SMU_MSG_PrepareMp1ForReset It needs to revert patch: drm/amd/powerplay: drop unnecessary message support check to avoid set mp1 state fail during gpu reset on renoir. Signed-off-by: changfeng <Changfeng.Zhu@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-22drm/amdgpu: add printing after executing page reservation to eepromGuchun Chen
This will tell users if the faulty page has been written to external eeprom device in dmesg log. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-22drm/amdgpu: expand sienna chichlid reg access supportJohn Clements
Added dedicated 64bit reg read/write support Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21Revert "drm/amd/display: Expose connector VRR range via debugfs"Bhanuprakash Modem
v3: * Rebase (Manasi) v2: * Rebase (Manasi) As both VRR min and max are already part of drm_display_info, drm can expose this VRR range for each connector. Hence this logic should move to core DRM. This reverts commit 727962f030c23422a01e8b22d0f463815fb15ec4. Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: AMD gfx <amd-gfx@lists.freedesktop.org> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amdgpu/sienna_cichlid: add SMU i2c support (v2)Alex Deucher
Enable SMU i2c bus access for sienna_cichlid asics. v2: change callback name Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amdgpu/navi1x: add SMU i2c support (v2)Alex Deucher
Enable SMU i2c bus access for navi1x asics. v2: add missing implementation Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amdgpu/swSMU: remove eeprom from the smu i2c handlers (v2)Alex Deucher
The driver uses it for EEPROM access, but it's just an i2c bus. v2: change the callback name as well. Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amdgpu/vega20: enable the smu i2c bus for all boardsAlex Deucher
There is no longer a ras dependency so it's safe to expose on all boards. Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amdgpu: remove eeprom from the smu i2c handlersAlex Deucher
The driver uses it for EEPROM access, but it's just an i2c bus. Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amdgpu: move i2c bus lock out of ras structureAlex Deucher
It's not really ras related. It's just a lock for the bus in general. This removes the ras dependency from the smu i2c bus. Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amdgpu: Fix NULL dereference in dpm sysfs handlersPaweł Gronowski
NULL dereference occurs when string that is not ended with space or newline is written to some dpm sysfs interface (for example pp_dpm_sclk). This happens because strsep replaces the tmp with NULL if the delimiter is not present in string, which is then dereferenced by tmp[0]. Reproduction example: sudo sh -c 'echo -n 1 > /sys/class/drm/card0/device/pp_dpm_sclk' Signed-off-by: Paweł Gronowski <me@woland.xyz> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/powerplay: fix a crash when overclocking Vega MQiu Wenbo
Avoid kernel crash when vddci_control is SMU7_VOLTAGE_CONTROL_NONE and vddci_voltage_table is empty. It has been tested on Intel Hades Canyon (i7-8809G). Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208489 Fixes: ac7822b0026f ("drm/amd/powerplay: add smumgr support for VEGAM (v2)") Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Qiu Wenbo <qiuwenbo@phytium.com.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/powerplay: retrieve VCN dpm table per instancesJiansong Chen
To accommodate VCN instances variance, otherwise it may trigger smu response error for configuration with less instances. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/powerplay: update driver if version for navy_flounderJiansong Chen
It's in accordance with pmfw 65.3.0 for navy_flounder. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/powerplay: fix typos for clk mapJiansong Chen
It should be DCLK1->PPCLK_DCLK_1 and VCLK->PPCLK_VCLK_0. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Acked-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amdgpu/vcn: merge shared memory into vcpuJames Zhu
Merge vcn firmware shared memory bo into vcn vcpu bo. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21Revert "drm/amdgpu/vcn: add shared memory restore after wake up from sleep."James Zhu
This reverts commit 21b704d78352c289d31697824ceea7ad0ff4ce59. To merge vcn firmware shared memory bo into vcn vcpu bo. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: 3.2.95Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: interface to obtain minimum plane size capsIgor Kravchenko
[Why] Implement an interface to obtain plane size caps [How] Add min_width, min_height fields to dc_plane_cap structure. Set values to 16x16 for discrete ASICs, and 64x64 for others. Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: Add additional config guards for DCNAurabindo Pillai
[Why&How] Fix build error by protecting code with config guard to enable building amdgpu without CONFIG_DRM_AMD_DC_DCN enabled. This option is disabled by default for allmodconfig. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: Call dsc related functions indirectly via dc interfaceAurabindo Pillai
[Why&How] Accessing dcn20_add_dsc_to_stream_resource directly causes build failure for configuration which has CONFIG_DRM_AMD_DC_DCN disabled. Fix this by calling the corresponding function exposed via dc resource functions. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: Improve compatibility by re-ordering info-packetsNaveed Ashfaq
[why] On DCN20, Some features would not be activated when ALLM was turned on. TV seemed to activate only the latest info packet sent, and the ALLM info packet was sent after the VSIF info packet. The packet indices was also inconsistent between DCN10 and DCN20. [how] Change the packet indices of DCN20 to match those of DCN10. This makes them consistent and also makes the vendor info packet be sent after the hfvsif info packet. Signed-off-by: Naveed Ashfaq <Naveed.Ashfaq@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: [FW Promotion] Release 0.0.25Anthony Koo
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: Make new dc interface for adding dsc resourceAurabindo Pillai
[Why] dcn20_add_dsc_to_stream_resource is accessed in amdgpu_dm directly. This creates build error for configuration with DCN disabled. [How] Make the function available through a resource pool function so that dcn20 function need not be called directly. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: rename dsc extended caps as dsc branch decoder capsWenjing Liu
[why] The capability fields are reserved for DSC branch only to report the capability related to the branch's DSC decoder. Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: Decouple ABM init from dmcuRoman Li
[Why] With ABM implemented on DMUB the ABM enablement shoudn't be solely rely on dmcu. Otherwise it won't work if dmcu is disabled. [How] 1. Decouple dmcub config copy from dmcu iram copy. 2. Set abm connector property if either dmcu or dmub enabled. Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: Implement AMD VSIF V3Reza Amini
[Why] To support V3 [How] Generate new VSIF for V3 Signed-off-by: Reza Amini <Reza.Amini@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: Add DSC parameters logging to debugfsEryk Brol
[why] Need to add new parameters to debugfs logging so we will know what parameters DSC is using for debug purposes. So we are adding a read function in debugfs to read DSC status registers Signed-off-by: Eryk Brol <eryk.brol@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: remove unhelpful 5ms delayAric Cyr
[Why] Scaler vendor confirmed the 5ms was not helpful so no point in keeping it. [How] Revert 5ms delay after setting training pattern. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amdgpu: do not disable SMU on vm rebootNirmoy Das
For passthrough device, we do baco reset after 1st vm boot so if we disable SMU on 1st VM shutdown baco reset will fail for 2nd vm boot. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amdgpu: add timeout flush mechanism to update wptr for self interrupt (v2)Chengming Gui
outstanding log reaches threshold will trigger IH ring1/2's wptr reported, that will avoid generating interrupts to ring0 too frequent. But if ring1/2's wptr hasn't been increased for a long time, the outstanding log can't reach threshold so that driver can't get latest wptr info and miss some interrupts. v2: squash in warning fix Signed-off-by: Chengming Gui <Jack.Gui@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amdgpu: enable xgmi support for sienna cichlidJohn Clements
set xgmi support flag suring nv ip init sequence Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amdgpu: load asd for sienna cichlidJohn Clements
do not abort psp asd load sequence for sienna cichlid Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/powerplay: tag swSMU code layersEvan Quan
Per designs, the swSMU code is separated into four layers. And the typical calling flow should be like: amdgpu_smu.c -> ${asic}_ppt.c -> smu_v11/12_0.c -> smu_cmn.c. Compile errors will come out for any violations. This can help to prevent cross callings(e.g. amdgpu_smu.c -> ${asic}_ppt.c -> amdgpu_smu.c -> ${asic}_ppt.c) which were common in our code. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/powerplay: revise the calling flow on OD table updateEvan Quan
This can eliminate the cross callings and maintain clear code layer. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-19 05:12:07 +0000