summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-12-05ARM: omap2plus_defconfig: enable XHCIFelipe Balbi
AM437x devices have a DWC3 IP inside of them. The host side implementation of DWC3 is XHCI compliant. By enabling XHCI driver, we get the USB host port on AM437x Starter Kit working out of the box. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-05ARM: omap2plus_defconfig: enable AM33XX SoC soundFelipe Balbi
Without this, sound on AM437x Starter Kit will not work. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-05ARM: omap2plus_defconfig: enable EDT FT5X06 touchscreenFelipe Balbi
AM437x Starter Kit ships with EDT FT5306 touchscreen device. By enabling the driver we make sure touchscreen will work out of the box. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-05ARM: omap2plus_defconfig: remove unwanted ethernet driversFelipe Balbi
None of these drivers are known to be used on any platform supported by omap2plus_defconfig, by removing them we get a slight smaller kernel. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-04ARM: multi_v7_defconfig: enable MAX77686 PMIC drivers for exynos4412-prime ↵Tyler Baker
based SoCs This patch enables the MAX77686 PMIC drivers in the multi_v7_defconfig used on exynos4412-prime family of SoCs [1]. The exynos4412-prime based boards are producing the following runtime errors only on the multi_v7_defconfig [2]: kern.err: deviceless supply vdd_arm not found, using dummy regulator kern.err: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 1287500 kern.err: cpufreq: __target_index: Failed to change cpu frequency: -22 I reviewed the exynos_defconfig, which does not produce these runtime errors. It was obvious that the exynos_defconfig has the PMIC drivers enabled, whereas the multi_v7_defconfig does not. This patch has been tested on a odroid-u2 and a odroid-u3 board. It has resolved the runtime errors. Therefore, I purpose we enabled these drivers in the multi_v7_defconfig. [1] http://www.hardkernel.com/main/products/prdt_info.php?g_code=G135270682824 [2] http://storage.armcloud.us/kernel-ci/mainline/v3.18-rc7-48-g7cc78f8/arm-multi_v7_defconfig/lab-tbaker-00/boot-exynos4412-odroidu3.html Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-12-04Merge tag 'at91-defconfig' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/defconfig Pull "First batch of defconfigs for AT91 / 3.19:" from Nicolas Ferre: - use NEON for all C-A5, neon code handles the !NEON case - add new XDMA driver - add some useful drivers as we only have a single defconfig for all AT91SAM9/RM9200 * tag 'at91-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/defconfig: add DM9000 to at91_dt ARM: at91/defconfig: add QT1070 to at91_dt ARM: at91/defconfig: add TCB PWM driver selection ARM: at91/defconfig: add the XDMA driver ARM: at91: sama5: update defconfig Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-04ARM: at91/defconfig: add DM9000 to at91_dtNicolas Ferre
This chip is present on at91sam9261ek board: add it to the at91_dt_defconfig. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-12-04ARM: at91/defconfig: add QT1070 to at91_dtNicolas Ferre
As this touch button driver is used on at91sam9x5ek, it's better to enable it. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-12-04ARM: at91/defconfig: add TCB PWM driver selectionNicolas Ferre
This is the selection of the new PWM driver using TC Blocks. This driver is useful so we enable it in both sama5 and at91_dt defconfig files. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-12-04ARM: at91/defconfig: add the XDMA driverNicolas Ferre
Add the Atmel eXtended DMA Controller driver option. This driver is first used on SAMA5D4 SoCs and only relevant in sama5_defconfig file. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-12-04ARM: at91: sama5: update defconfigLudovic Desroches
Add neon support for sama5d4 and large blocks/files support. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-12-04ARM: defconfig: imx_v6_v7_defconfig updatesDmitry Lavnikevich
This is a squash of several imx_v6_v7_defconfig update patches. - Enable tlv320aic3x audio codec by default (Phytec PBAB01 board) - Enable DS1307 rtc and gpio fan by default (TBS2910 board) - Select thermal related drivers - Add SNVS power off driver Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com> Signed-off-by: Soeren Moch <smoch@web.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-28Merge tag 'tegra-for-3.19-defconfig' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig Pull "ARM: tegra: Default configuration changes for v3.19" from Thierry Reding: This is merely a regeneration of the default configuration to get rid of two symbols that are now enabled by default or removed. * tag 'tegra-for-3.19-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Regenerate default configuration Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-28Merge tag 'mvebu-defconfig-3.19-2' of git://git.infradead.org/linux-mvebu ↵Arnd Bergmann
into next/defconfig Pull "mvebu defconfig changes for v3.19 (round 2)" from Jason Cooper: - mvebu - Add SDHCI, i2c, and MTD_BLOCK * tag 'mvebu-defconfig-3.19-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: add MTD_BLOCK to mvebu_v7_defconfig ARM: mvebu: enable i2c device in mvebu_v7_defconfig ARM: mvebu: re-enable SDHCI driver for Armada 38x SoC in v7 defconfig Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-28ARM: multi_v7_defconfig: add driver support for hix5hd2Zhangfei Gao
Tested on hix5hd2 platform with mmc, usb, network, reboot etc. Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-28ARM: exynos_defconfig: Use 16 minors per MMC block deviceKrzysztof Kozlowski
16 minors per MMC block device are required to boot Rinato (Gear 2) board because up to 15 partitions are used. With default 8 minors booting failed with: [ 1.329092] mmcblk0: mmc0:0001 F5X5MA 3.64 GiB [ 1.329448] mmcblk0boot0: mmc0:0001 F5X5MA partition 1 4.00 MiB [ 1.329627] mmcblk0boot1: mmc0:0001 F5X5MA partition 2 4.00 MiB [ 1.329808] mmcblk0rpmb: mmc0:0001 F5X5MA partition 3 512 KiB [ 1.335717] mmcblk0: p1 p2 p3 p4 p5 p6 p7 [ 1.436553] Waiting for root device /dev/mmcblk0p15... while the correct list of partitions on mmcblk0 for Gear 2 is: [ 1.436651] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-22ARM: mvebu: add MTD_BLOCK to mvebu_v7_defconfigThomas Petazzoni
Since many (most?) mvebu platforms have NAND or SPI flashes, it makes sense to have CONFIG_MTD_BLOCK=y in mvebu_v7_defconfig. The vast majority of the other ARM defconfigs have it enabled, including mvebu_v5_defconfig. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1415873489-22446-1-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-22ARM: mvebu: enable i2c device in mvebu_v7_defconfigMarcin Wojtas
This commit enables user-space access to I2C bus using char device. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1415980652-7429-6-git-send-email-mw@semihalf.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-22ARM: mvebu: re-enable SDHCI driver for Armada 38x SoC in v7 defconfigMarcin Wojtas
In the recent update of mvebu_v7_defconfig a config that enables sdhci-pxav3 driver, that supports SDHCI interface of Armada 38x SoC, disappeared. This commit enables CONFIG_MMC_SDHCI_PXAV3 back. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Fixes fc9fa8714a75 ("ARM: mvebu: update v7 defconfig with useful options") Link: https://lkml.kernel.org/r/1415980652-7429-2-git-send-email-mw@semihalf.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-21ARM: tegra: Regenerate default configurationThierry Reding
This patch was generated by running 'make tegra_defconfig' followed by 'make savedefconfig' with the v3.18-rc1 tag checked out. Two values go away: CONFIG_SCSI is selected by CONFIG_ATA and CONFIG_SCSI_MULTI_LUN was removed. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-20Merge tag 'sti-defconfig-for-v3.19-1' of ↵Arnd Bergmann
git://git.stlinux.com/devel/kernel/linux-sti into next/defconfig Pull "STi defconfig updates for v3.19" from Maxime Coquelin: Highlights: ----------- - Enable ST EHCI and OHCI USB drivers - Enable STiH416 and STiH415 USB2 PHY driver * tag 'sti-defconfig-for-v3.19-1' of git://git.stlinux.com/devel/kernel/linux-sti: ARM: multi_v7_defconfig: Enable stih415/6 usb2 phy driver. ARM: multi_v7_defconfig: Enable st ohci and ehci HCD drivers. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-20ARM: multi_v7_defconfig: Enable cgroupsSoren Brinkmann
This allows booting the kernel with systemd-based root file systems. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-20Merge tag 'keystone-soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/defconfig Pull "Keystone config updates for 3.19" from Santosh Shilimkar: - Enable PCIE controller and related options - Enable MDIO and ethernet phy options - Enable DSP IRQCHIP option * tag 'keystone-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: keystone: defconfig: add options to enable PCI controller ARM: keystone: add pcie related options ARM: keystone_defconfig: enable mdio and marvell eth phys ARM: keystone_defconfig: enable dsp irq and gpio support Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-20ARM: multi_v7_defconfig: Enable Broadcom CygnusRay Jui
Enable Broadcom Cygnus platform support in multi_v7_defconfig Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-20ARM: multi_v7_defconfig: remove one level of menu from KconfigScott Branden
remove menu "Broadcom Mobile SoC Selection" This requires: - selecting ARCH_BCM_MOBILE based on SoC selections - fixup multi_v7_defconfig to work with new menu levels of mach-bcm. Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19Merge tag 'mvebu-defconfig-3.19' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann
next/defconfig Pull "mvebu defconfig changes for v3.19" from Jason Cooper" - Add options for DLink DIR665 - Add Armada 370 simple-card audio option - Add mv88E6171 switch driver option * tag 'mvebu-defconfig-3.19' of git://git.infradead.org/linux-mvebu: ARM: mvebu: defconfig: Enable the mv88E6171 switch driver ARM: mvebu: update mvebu_v7_defconfig for Armada 370 audio ARM: config: Add DLINK DIR665 options to multi_v5_defconfig ARM: mvebu: Add DLINK DIR665 options to mvebu_v5_defconfig Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19Merge tag 'hix5hd2-config-for-3.19' of git://github.com/hisilicon/linux-hisi ↵Arnd Bergmann
into next/defconfig Pull "ARM: HiX5HD2: config update for 3.19" from Wei Xu: - Enable GMAC, GPIO, Reset, USB, MMC and SATA on HiX5HD2 * tag 'hix5hd2-config-for-3.19' of git://github.com/hisilicon/linux-hisi: ARM: hisi_defconfig: add driver support for hix5hd2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19Merge tag 'renesas-defconfig-for-v3.19' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig Pull "Renesas ARM Based SoC Defconfig Updates for v3.19" from Simon Horman: * Enable AK4642, Audo DMAC peri peri and R-Car DMAC in shmobile defconrig * Enable PM Runtime in ape6evm defconfig * tag 'renesas-defconfig-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: multiplatform: add AK4642 support on defconfig ARM: shmobile: multiplatform: add Audo DMAC peri peri support on defconfig ARM: shmobile: multiplatform: add R-Car DMAC support on defconfig ARM: shmobile: ape6evm: Enable PM Runtime in defconfig Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-18ARM: multi_v7_defconfig: Enable stih415/6 usb2 phy driver.Peter Griffin
This driver is used by the ehci / ohci usb controllers on stih415/6 SoCs. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-11-18ARM: multi_v7_defconfig: Enable st ohci and ehci HCD drivers.Peter Griffin
Enable the ehci and ohci drivers in the multi_v7_defconfig so that the USB controllers on stih41x work by default. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-11-07ARM: hisi_defconfig: add driver support for hix5hd2Zhangfei Gao
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2014-11-07ARM: mvebu: defconfig: Enable the mv88E6171 switch driverAndrew Lunn
This switch is used by the 370-rd. Enable it and support for fixed-link phy configuration. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1415214121-29286-4-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-07ARM: mvebu: update mvebu_v7_defconfig for Armada 370 audioThomas Petazzoni
Now that the Armada 370 DB audio complex is represented fully in Device Tree using the simple-card DT binding, this commit updates mvebu_v7_defconfig to no longer select the Armada 370 DB audio machine driver, and instead select the appropriate audio controller and codec drivers. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1414512524-24466-7-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-05ARM: shmobile: multiplatform: add AK4642 support on defconfigKuninori Morimoto
AK4642 is well used audio codec on Renesas reference board Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-05ARM: shmobile: multiplatform: add Audo DMAC peri peri support on defconfigKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-05ARM: shmobile: multiplatform: add R-Car DMAC support on defconfigKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-04ARM: keystone: defconfig: add options to enable PCI controllerMurali Karicheri
This patch enables PCI controller driver for Keystone SoCs by default. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2014-11-04ARM: keystone: add pcie related optionsMurali Karicheri
Now that Keystone PCI controller is merged, add pcie related options by default for keystone architecture so that driver can be enabled in the build. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2014-11-04ARM: keystone_defconfig: enable mdio and marvell eth physGrygorii Strashko
Enable MDIO support for Keystone 2 SoCs and also enable Marvell Ethernet PHYs support for Keystone 2 K2H EVM which has two 1G Marvell 88E1111-B2 PHYs installed. For more information see: - http://www.advantech.com/Support/TI-EVM/EVMK2HX.aspx Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2014-11-04ARM: keystone_defconfig: enable dsp irq and gpio supportGrygorii Strashko
Enable DSP IRQ controller and GPIOs support for Keystone 2. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2014-11-04ARM: shmobile: ape6evm: Enable PM Runtime in defconfigSimon Horman
This is consistent with other shmobile defconfigs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-01ARM: config: Add DLINK DIR665 options to multi_v5_defconfigAndrew Lunn
Enable building of the switch chip driver and the wireless driver needed by the DLINK DIR665 Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: arm@kernel.org Link: https://lkml.kernel.org/r/1414793613-11798-5-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-01ARM: mvebu: Add DLINK DIR665 options to mvebu_v5_defconfigAndrew Lunn
Enable building of the switch chip driver and the wireless driver needed by the DLINK DIR665 Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1414793613-11798-4-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-10-19Linux 3.18-rc1Linus Torvalds
2014-10-19Merge tag 'arm-soc-fixes-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A batch of fixes that have come in during the merge window. Some of them are defconfig updates for things that have now landed, some errata additions and a few general scattered fixes. There's also a qcom DT update that adds support for SATA on AP148, and basic support for Sony Xperia Z1 and CM-QS600 platforms that seemed isolated enough that we could merge it even if it's late" * tag 'arm-soc-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: corrected bcm2835 search ARM: dts: Explicitly set dr_mode on exynos5420-arndale-octa ARM: dts: Explicitly set dr_mode on exynos Peach boards ARM: dts: qcom: add CM-QS600 board ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phone ARM: dts: qcom: Add SATA support on IPQ8064/AP148 MAINTAINERS: Update Santosh Shilimkar's email id ARM: sunxi_defconfig: enable CONFIG_REGULATOR ARM: dts: Disable smc91x on n900 until bootloader dependency is removed ARM: omap2plus_defconfig: Enable ARM erratum 430973 for omap3 ARM: exynos_defconfig: enable USB gadget support ARM: exynos_defconfig: Enable Maxim 77693 and I2C GPIO drivers ARM: mm: Fix ifdef around cpu_*_do_[suspend, resume] ops ARM: EXYNOS: Fix build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=n ARM: SAMSUNG: Restore Samsung PM Debug functionality ARM: dts: Fix pull setting in sd4_width8 pin group for exynos4x12 ARM: exynos_defconfig: Enable SBS battery support ARM: exynos_defconfig: Enable Control Groups support ARM: exynos_defconfig: Enable Atmel maXTouch support ARM: exynos_defconfig: Enable MAX77802
2014-10-19Merge git://git.infradead.org/users/eparis/auditLinus Torvalds
Pull audit updates from Eric Paris: "So this change across a whole bunch of arches really solves one basic problem. We want to audit when seccomp is killing a process. seccomp hooks in before the audit syscall entry code. audit_syscall_entry took as an argument the arch of the given syscall. Since the arch is part of what makes a syscall number meaningful it's an important part of the record, but it isn't available when seccomp shoots the syscall... For most arch's we have a better way to get the arch (syscall_get_arch) So the solution was two fold: Implement syscall_get_arch() everywhere there is audit which didn't have it. Use syscall_get_arch() in the seccomp audit code. Having syscall_get_arch() everywhere meant it was a useless flag on the stack and we could get rid of it for the typical syscall entry. The other changes inside the audit system aren't grand, fixed some records that had invalid spaces. Better locking around the task comm field. Removing some dead functions and structs. Make some things static. Really minor stuff" * git://git.infradead.org/users/eparis/audit: (31 commits) audit: rename audit_log_remove_rule to disambiguate for trees audit: cull redundancy in audit_rule_change audit: WARN if audit_rule_change called illegally audit: put rule existence check in canonical order next: openrisc: Fix build audit: get comm using lock to avoid race in string printing audit: remove open_arg() function that is never used audit: correct AUDIT_GET_FEATURE return message type audit: set nlmsg_len for multicast messages. audit: use union for audit_field values since they are mutually exclusive audit: invalid op= values for rules audit: use atomic_t to simplify audit_serial() kernel/audit.c: use ARRAY_SIZE instead of sizeof/sizeof[0] audit: reduce scope of audit_log_fcaps audit: reduce scope of audit_net_id audit: arm64: Remove the audit arch argument to audit_syscall_entry arm64: audit: Add audit hook in syscall_trace_enter/exit() audit: x86: drop arch from __audit_syscall_entry() interface sparc: implement is_32bit_task sparc: properly conditionalize use of TIF_32BIT ...
2014-10-19Merge tag 'qcom-dt-for-3.18-3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into fixes Merge "qcom DT changes for v3.18-3" from Kumar Gala: Qualcomm ARM Based Device Tree Updates for v3.18-3 * Added Board support for CM-QS600 and Sony Xperia Z1 phone * Added SATA support on IPQ8064/AP148 * tag 'qcom-dt-for-3.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom: ARM: dts: qcom: add CM-QS600 board ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phone ARM: dts: qcom: Add SATA support on IPQ8064/AP148
2014-10-19Merge tag 'samsung-fixes-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Pull more fixes from Kukjin Kim: 2nd Samsung fixes for v3.18 - Explicitly set dr_mode on exynos5800-peach-pi, exynos5420-peach-pit and exynos5420-arndale-octa boards, because the USB dwc3 controller will not work properly without dr_mode as host on above boards if the USB host and gadget are enabled in kernel configuration both. * tag 'samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Explicitly set dr_mode on exynos5420-arndale-octa ARM: dts: Explicitly set dr_mode on exynos Peach boards Signed-off-by: Olof Johansson <olof@lixom.net>
2014-10-19MAINTAINERS: corrected bcm2835 searchScott Branden
Corrected bcm2835 maintainer info by using N: to specify any files with bcm2835 in are directed to the proper maintainer. Also corrected minor mispelling of ARCHITECTURE in 2 comment locations. Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-10-19Merge tag 'ntb-3.18' of git://github.com/jonmason/ntbLinus Torvalds
Pull ntb (non-transparent bridge) updates from Jon Mason: "Add support for Haswell NTB split BARs, a debugfs entry for basic debugging info, and some code clean-ups" * tag 'ntb-3.18' of git://github.com/jonmason/ntb: ntb: Adding split BAR support for Haswell platforms ntb: use errata flag set via DID to implement workaround ntb: conslidate reading of PPD to move platform detection earlier ntb: move platform detection to separate function NTB: debugfs device entry
generated by cgit (git 2.34.1) at 2025-09-07 06:51:39 +0000