Age | Commit message (Collapse) | Author |
|
usb: typec: altmodes/displayport: Signal hpd low when exiting mode
and
drm: Add HPD state to drm_connector_oob_hotplug_event()
sideswiped each other.
Signal disconnected always.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/mac80211/rx.c
91535613b609 ("wifi: mac80211: don't drop all unprotected public action frames")
6c02fab72429 ("wifi: mac80211: split ieee80211_drop_unencrypted_mgmt() return value")
Adjacent changes:
drivers/net/ethernet/apm/xgene/xgene_enet_main.c
61471264c018 ("net: ethernet: apm: Convert to platform remove callback returning void")
d2ca43f30611 ("net: xgene: Fix unused xgene_enet_of_match warning for !CONFIG_OF")
net/vmw_vsock/virtio_transport.c
64c99d2d6ada ("vsock/virtio: support to send non-linear skb")
53b08c498515 ("vsock/virtio: initialize the_virtio_vsock before using VQs")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Per Amir Goldstein, the fid types that bcachefs picked conflicted with
xfs and fuse, which previously were in use but not deviced in the master
enum.
Since bcachefs is still out of tree, we can move.
https://lore.kernel.org/linux-next/20231026203733.fx65mjyic4pka3e5@moria.home.lan/T/#ma59f65ba61f605b593e69f4690dbd317526d83ba
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Rather than doing this in the IP code for the SDMA paging
engine, move it up to the core device level init level.
This should fix the scheduler init ordering.
v2: drop extra parens
v3: drop SDMA helpers
v4: Added a Fixes tag because amdgpu dereferences an uninitialized
scheduler without this patch, and this patch fixes this. (Luben)
Tested-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20231025171928.3318505-1-alexander.deucher@amd.com
Acked-by: Christian König <christian.koenig@amd.com>
Fixes: 56e449603f0ac5 ("drm/sched: Convert the GPU scheduler to variable number of run-queues")
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
|
|
Update the GPU Scheduler maintainer email.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Cc: Direct Rendering Infrastructure - Development <dri-devel@lists.freedesktop.org>
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Link: https://lore.kernel.org/r/20231026174438.18427-2-ltuikov89@gmail.com
|
|
If DRM_IOCTL_SYNCOBJ_TIMELINE_WAIT is invoked with the
DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE flag set but no fence has yet been
submitted for the given timeline point the call will fail immediately
with EINVAL. This does not match the intended behavior where the call
should wait until the fence has been submitted (or the timeout expires).
The following small example program illustrates the issue. It should
wait for 5 seconds and then print ETIME, but instead it terminates right
away after printing EINVAL.
#include <stdio.h>
#include <fcntl.h>
#include <time.h>
#include <errno.h>
#include <xf86drm.h>
int main(void)
{
int fd = open("/dev/dri/card0", O_RDWR);
uint32_t syncobj;
drmSyncobjCreate(fd, 0, &syncobj);
struct timespec ts;
clock_gettime(CLOCK_MONOTONIC, &ts);
uint64_t point = 1;
if (drmSyncobjTimelineWait(fd, &syncobj, &point, 1,
ts.tv_sec * 1000000000 + ts.tv_nsec + 5000000000, // 5s
DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE, NULL)) {
printf("drmSyncobjTimelineWait failed %d\n", errno);
}
}
Fixes: 01d6c3578379 ("drm/syncobj: add support for timeline point wait v8")
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Reviewed by: Simon Ser <contact@emersion.fd>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/1fac96f1-2f3f-f9f9-4eb0-340f27a8f6c0@nvidia.com
|
|
Describe network access rules for TCP sockets. Add network access
example in the tutorial. Add kernel configuration support for network.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-13-konstantin.meskhidze@huawei.com
[mic: Update date, and do light cosmetic changes]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Add TCP restrictions to the sandboxer demo. It's possible to allow a
sandboxer to bind/connect to a list of specified ports restricting
network actions to the rest of them. This is controlled with the new
LL_TCP_BIND and LL_TCP_CONNECT environment variables.
Rename ENV_PATH_TOKEN to ENV_DELIMITER.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-12-konstantin.meskhidze@huawei.com
[mic: Extend commit message]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Add 82 test suites to check edge cases related to bind() and connect()
actions. They are defined with 6 fixtures and their variants:
The "protocol" fixture is extended with 12 variants defined as a matrix
of: sandboxed/not-sandboxed, IPv4/IPv6/unix network domain, and
stream/datagram socket. 4 related tests suites are defined:
* bind: Tests bind action.
* connect: Tests connect action.
* bind_unspec: Tests bind action with the AF_UNSPEC socket family.
* connect_unspec: Tests connect action with the AF_UNSPEC socket family.
The "ipv4" fixture is extended with 4 variants defined as a matrix
of: sandboxed/not-sandboxed, and stream/datagram socket. 1 related test
suite is defined:
* from_unix_to_inet: Tests to make sure unix sockets' actions are not
restricted by Landlock rules applied to TCP ones.
The "tcp_layers" fixture is extended with 8 variants defined as a matrix
of: IPv4/IPv6 network domain, and different number of landlock rule
layers. 2 related tests suites are defined:
* ruleset_overlap: Tests nested layers with less constraints.
* ruleset_expand: Tests nested layers with more constraints.
In the "mini" fixture 4 tests suites are defined:
* network_access_rights: Tests handling of known access rights.
* unknown_access_rights: Tests handling of unknown access rights.
* inval: Tests unhandled allowed access and zero access value.
* tcp_port_overflow: Tests with port values greater than 65535.
The "ipv4_tcp" fixture supports IPv4 network domain with stream socket.
2 tests suites are defined:
* port_endianness: Tests with big/little endian port formats.
* with_fs: Tests a ruleset with both filesystem and network
restrictions.
The "port_specific" fixture is extended with 4 variants defined
as a matrix of: sandboxed/not-sandboxed, IPv4/IPv6 network domain,
and stream socket. 2 related tests suites are defined:
* bind_connect_zero: Tests with port 0.
* bind_connect_1023: Tests with port 1023.
Test coverage for security/landlock is 92.4% of 710 lines according to
gcc/gcov-13.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-11-konstantin.meskhidze@huawei.com
[mic: Extend commit message, update test coverage, clean up capability
use, fix useless TEST_F_FORK, and improve ipv4_tcp.with_fs]
Co-developed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Move enforce_ruleset() helper function to common.h so that it can be
used both by filesystem tests and network ones.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-10-konstantin.meskhidze@huawei.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Add network rules support in the ruleset management helpers and the
landlock_create_ruleset() syscall. Extend user space API to support
network actions:
* Add new network access rights: LANDLOCK_ACCESS_NET_BIND_TCP and
LANDLOCK_ACCESS_NET_CONNECT_TCP.
* Add a new network rule type: LANDLOCK_RULE_NET_PORT tied to struct
landlock_net_port_attr. The allowed_access field contains the network
access rights, and the port field contains the port value according to
the controlled protocol. This field can take up to a 64-bit value
but the maximum value depends on the related protocol (e.g. 16-bit
value for TCP). Network port is in host endianness [1].
* Add a new handled_access_net field to struct landlock_ruleset_attr
that contains network access rights.
* Increment the Landlock ABI version to 4.
Implement socket_bind() and socket_connect() LSM hooks, which enable
to control TCP socket binding and connection to specific ports.
Expand access_masks_t from u16 to u32 to be able to store network access
rights alongside filesystem access rights for rulesets' handled access
rights.
Access rights are not tied to socket file descriptors but checked at
bind() or connect() call time against the caller's Landlock domain. For
the filesystem, a file descriptor is a direct access to a file/data.
However, for network sockets, we cannot identify for which data or peer
a newly created socket will give access to. Indeed, we need to wait for
a connect or bind request to identify the use case for this socket.
Likewise a directory file descriptor may enable to open another file
(i.e. a new data item), but this opening is also restricted by the
caller's domain, not the file descriptor's access rights [2].
[1] https://lore.kernel.org/r/278ab07f-7583-a4e0-3d37-1bacd091531d@digikod.net
[2] https://lore.kernel.org/r/263c1eb3-602f-57fe-8450-3f138581bee7@digikod.net
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-9-konstantin.meskhidze@huawei.com
[mic: Extend commit message, fix typo in comments, and specify
endianness in the documentation]
Co-developed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Change the landlock_add_rule() syscall to support new rule types with
next commits. Add the add_rule_path_beneath() helper to support current
filesystem rules.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-8-konstantin.meskhidze@huawei.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Add a new key_type argument to the landlock_init_layer_masks() helper.
Add a masks_array_size argument to the landlock_unmask_layers() helper.
These modifications support implementing new rule types in the next
Landlock versions.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-7-konstantin.meskhidze@huawei.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Move and rename landlock_unmask_layers() and landlock_init_layer_masks()
helpers to ruleset.c to share them with Landlock network implementation
in following commits.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-6-konstantin.meskhidze@huawei.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Refactor merge_ruleset() and inherit_ruleset() functions to support new
rule types. Add merge_tree() and inherit_tree() helpers. They use a
specific ruleset's red-black tree according to a key type argument.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-5-konstantin.meskhidze@huawei.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Add a new landlock_key union and landlock_id structure to support a
socket port rule type. A struct landlock_id identifies a unique entry
in a ruleset: either a kernel object (e.g. inode) or typed data (e.g.
TCP port). There is one red-black tree per key type.
Add is_object_pointer() and get_root() helpers. is_object_pointer()
returns true if key type is LANDLOCK_KEY_INODE. get_root() helper
returns a red-black tree root pointer according to a key type.
Refactor landlock_insert_rule() and landlock_find_rule() to support
coming network modifications. Adding or searching a rule in ruleset can
now be done thanks to a Landlock ID argument passed to these helpers.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-4-konstantin.meskhidze@huawei.com
[mic: Fix commit message typo]
Co-developed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Allow mount point and root directory changes when there is no filesystem
rule tied to the current Landlock domain. This doesn't change anything
for now because a domain must have at least a (filesystem) rule, but
this will change when other rule types will come. For instance, a domain
only restricting the network should have no impact on filesystem
restrictions.
Add a new get_current_fs_domain() helper to quickly check filesystem
rule existence for all filesystem LSM hooks.
Remove unnecessary inlining.
Link: https://lore.kernel.org/r/20231026014751.414649-3-konstantin.meskhidze@huawei.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Rename ruleset's access masks and modify it's type to access_masks_t
to support network type rules in following commits. Add filesystem
helper functions to add and get filesystem mask.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-2-konstantin.meskhidze@huawei.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A couple of platforms have some last-minute fixes, in particular:
- riscv gets some fixes for noncoherent DMA on the renesas and thead
platforms and dts fix for SPI on the visionfive 2 board
- Qualcomm Snapdragon gets three dts fixes to address board specific
regressions on the pmic and gpio nodes
- Rockchip platforms get multiple dts fixes to address issues on the
recent rk3399 platform as well as the older rk3128 platform that
apparently regressed a while ago.
- TI OMAP gets some trivial code and dts fixes and a regression fix
for the omap1 ams-delta modem
- NXP i.MX firmware has one fix for a use-after-free but in its error
handling"
* tag 'soc-fixes-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
soc: renesas: ARCH_R9A07G043 depends on !RISCV_ISA_ZICBOM
riscv: only select DMA_DIRECT_REMAP from RISCV_ISA_ZICBOM and ERRATA_THEAD_PBMT
riscv: RISCV_NONSTANDARD_CACHE_OPS shouldn't depend on RISCV_DMA_NONCOHERENT
riscv: dts: thead: set dma-noncoherent to soc bus
arm64: dts: rockchip: Fix i2s0 pin conflict on ROCK Pi 4 boards
arm64: dts: rockchip: Add i2s0-2ch-bus-bclk-off pins to RK3399
clk: ti: Fix missing omap5 mcbsp functional clock and aliases
clk: ti: Fix missing omap4 mcbsp functional clock and aliases
ARM: OMAP1: ams-delta: Fix MODEM initialization failure
soc: renesas: Make ARCH_R9A07G043 depend on required options
riscv: dts: starfive: visionfive 2: correct spi's ss pin
firmware/imx-dsp: Fix use_after_free in imx_dsp_setup_channels()
ARM: OMAP: timer32K: fix all kernel-doc warnings
ARM: omap2: fix a debug printk
ARM: dts: rockchip: Fix timer clocks for RK3128
ARM: dts: rockchip: Add missing quirk for RK3128's dma engine
ARM: dts: rockchip: Add missing arm timer interrupt for RK3128
ARM: dts: rockchip: Fix i2c0 register address for RK3128
arm64: dts: rockchip: set codec system-clock-fixed on px30-ringneck-haikou
arm64: dts: rockchip: use codec as clock master on px30-ringneck-haikou
...
|
|
There are two reasons to do this, firstly there is a shellcheck warning
in cs_etm_dev_name(), which can be completely deleted. And secondly the
current iteration method doesn't support systems with both ETE and ETM
because it picks one or the other. There isn't a known system with this
configuration, but it could happen in the future.
Iterating over all the sources for each CPU can be done by going through
/sys/bus/event_source/devices/cs_etm/cpu* and following the symlink back
to the Coresight device in /sys/bus/coresight/devices. This will work
whether the device is ETE, ETM or any future name, and is much simpler
and doesn't require any hard coded version numbers
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: tianruidong@linux.alibaba.com
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Anushree Mathur <anushree.mathur@linux.vnet.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: atrajeev@linux.vnet.ibm.com
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231023131550.487760-1-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
This addresses a few comments/issues in my v2 submission:
- repeated word: 'run' from kernel test robot
- emacs/ediff mode from Jon Corbet
- various comments from Willy Tarreau
- more backporting advice from Ben Hutchings
- a couple more cherry-pick tips from Harshit Mogalapalli
- add a bit about stable submissions
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Link: https://lore.kernel.org/r/20231023135722.949510-1-vegard.nossum@oracle.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
tools/testing/cxl contains the unit test infrastructure for mocking CXL
hierarchies. These are under the purview of the CXL subsystem maintainers.
Add the 'F:' entry for this to MAINTAINERS so that get_maintainer.pl
works as expected for patches to this area.
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20231026-vv-mainteners-fix-v1-1-0a0f25634073@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from WiFi and netfilter.
Most regressions addressed here come from quite old versions, with the
exceptions of the iavf one and the WiFi fixes. No known outstanding
reports or investigation.
Fixes to fixes:
- eth: iavf: in iavf_down, disable queues when removing the driver
Previous releases - regressions:
- sched: act_ct: additional checks for outdated flows
- tcp: do not leave an empty skb in write queue
- tcp: fix wrong RTO timeout when received SACK reneging
- wifi: cfg80211: pass correct pointer to rdev_inform_bss()
- eth: i40e: sync next_to_clean and next_to_process for programming
status desc
- eth: iavf: initialize waitqueues before starting watchdog_task
Previous releases - always broken:
- eth: r8169: fix data-races
- eth: igb: fix potential memory leak in igb_add_ethtool_nfc_entry
- eth: r8152: avoid writing garbage to the adapter's registers
- eth: gtp: fix fragmentation needed check with gso"
* tag 'net-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits)
iavf: in iavf_down, disable queues when removing the driver
vsock/virtio: initialize the_virtio_vsock before using VQs
net: ipv6: fix typo in comments
net: ipv4: fix typo in comments
net/sched: act_ct: additional checks for outdated flows
netfilter: flowtable: GC pushes back packets to classic path
i40e: Fix wrong check for I40E_TXR_FLAGS_WB_ON_ITR
gtp: fix fragmentation needed check with gso
gtp: uapi: fix GTPA_MAX
Fix NULL pointer dereference in cn_filter()
sfc: cleanup and reduce netlink error messages
net/handshake: fix file ref count in handshake_nl_accept_doit()
wifi: mac80211: don't drop all unprotected public action frames
wifi: cfg80211: fix assoc response warning on failed links
wifi: cfg80211: pass correct pointer to rdev_inform_bss()
isdn: mISDN: hfcsusb: Spelling fix in comment
tcp: fix wrong RTO timeout when received SACK reneging
r8152: Block future register access if register access fails
r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE
r8152: Check for unplug in r8153b_ups_en() / r8153c_ups_en()
...
|
|
PPS documentation has a generalized section for generators. Update the
section so any new generator documentation can be appended.
Signed-off-by: Pandith N <pandith.n@intel.com>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231016101953.27308-1-lakshmi.sowjanya.d@intel.com
|
|
Speakup has been supporting USB for a while already.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231020181059.7rtj2csi7t6vorrm@begin
|
|
Our system administrator have noted that the names 'rt-to-be' and
'all-to-idle' in the I/O priority policies table appeared without
explanations, leading to confusion. Let's bring these names in line
with the naming in the 'attribute' section.
Additionally,
1. Correct the interface name to 'io.prio.class'.
2. Add a table entry of 'promote-to-rt' for consistency.
3. Fix a typo of 'priority'.
Suggested-by: Yingfu Zhou <yingfu.zhou@shopee.com>
Reviewed-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Tang Yizhou <yizhou.tang@shopee.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231012024228.2161283-1-yizhou.tang@shopee.com
|
|
Add tma_info_system_socket_clks and uncore_freq metrics.
The associated converter script fix is in:
https://github.com/intel/perfmon/pull/112
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Link: https://lore.kernel.org/r/20230926205948.1399594-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add tma_info_system_socket_clks and uncore_freq metrics that require a
broadwellx style uncore event for UNC_CLOCK.
The associated converter script fix is in:
https://github.com/intel/perfmon/pull/112
Fixes: 7d124303d620 ("perf vendor events intel: Update broadwell variant events/metrics")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Link: https://lore.kernel.org/r/20230926205948.1399594-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Initialize the CBO variables on ACPI based systems using information in
RHCT.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231018124007.1306159-5-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Cache Block Operation (CBO) related block size in ACPI is provided by RHCT.
Add support to read the CMO node in RHCT to get this information.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231018124007.1306159-4-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
acpi_get_rhct() currently returns pointer to acpi_table_header
structure. But since this is specific to RHCT, return pointer to
acpi_table_rhct structure itself.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231018124007.1306159-3-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Enhance the acpi_os_ioremap() to support opregions in MMIO space. Also,
have strict checks using EFI memory map to allow remapping the RAM similar
to arm64.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231018124007.1306159-2-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When using pcie_capability_clear_and_set_word() but not actually *setting*
anything, use pcie_capability_clear_word() instead.
Link: https://lore.kernel.org/r/20231026121924.2164-1-ilpo.jarvinen@linux.intel.com
Link: https://lore.kernel.org/r/20231026121924.2164-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The pci_epc_release() function frees "epc" so the kfree() on the next line
is a double free. Drop the redundant free.
Fixes: 7711cbb4862a ("PCI: endpoint: Fix WARN() when an endpoint driver is removed")
Link: https://lore.kernel.org/r/2ce68694-87a7-4c06-b8a4-9870c891b580@moroto.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
* for-next/cpus_have_const_cap: (38 commits)
: cpus_have_const_cap() removal
arm64: Remove cpus_have_const_cap()
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_REPEAT_TLBI
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_NVIDIA_CARMEL_CNP
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_CAVIUM_23154
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_2645198
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_1742098
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_1542419
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_843419
arm64: Avoid cpus_have_const_cap() for ARM64_UNMAP_KERNEL_AT_EL0
arm64: Avoid cpus_have_const_cap() for ARM64_{SVE,SME,SME2,FA64}
arm64: Avoid cpus_have_const_cap() for ARM64_SPECTRE_V2
arm64: Avoid cpus_have_const_cap() for ARM64_SSBS
arm64: Avoid cpus_have_const_cap() for ARM64_MTE
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_TLB_RANGE
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_WFXT
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_RNG
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_EPAN
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_PAN
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_GIC_PRIO_MASKING
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_DIT
...
|
|
* for-next/feat_lse128:
: HWCAP for FEAT_LSE128
kselftest/arm64: add FEAT_LSE128 to hwcap test
arm64: add FEAT_LSE128 HWCAP
|
|
* for-next/feat_lrcpc3:
: HWCAP for FEAT_LRCPC3
selftests/arm64: add HWCAP2_LRCPC3 test
arm64: add FEAT_LRCPC3 HWCAP
|
|
* for-next/feat_sve_b16b16:
: Add support for FEAT_SVE_B16B16 (BFloat16)
kselftest/arm64: Verify HWCAP2_SVE_B16B16
arm64/sve: Report FEAT_SVE_B16B16 to userspace
|
|
'for-next/kselftest', 'for-next/misc' and 'for-next/cpufeat-display-cores', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: hisi: Fix use-after-free when register pmu fails
drivers/perf: hisi_pcie: Initialize event->cpu only on success
drivers/perf: hisi_pcie: Check the type first in pmu::event_init()
perf/arm-cmn: Enable per-DTC counter allocation
perf/arm-cmn: Rework DTC counters (again)
perf/arm-cmn: Fix DTC domain detection
drivers: perf: arm_pmuv3: Drop some unused arguments from armv8_pmu_init()
drivers: perf: arm_pmuv3: Read PMMIR_EL1 unconditionally
drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process
drivers/perf: xgene: Use device_get_match_data()
perf/amlogic: add missing MODULE_DEVICE_TABLE
docs/perf: Add ampere_cspmu to toctree to fix a build warning
perf: arm_cspmu: ampere_cspmu: Add support for Ampere SoC PMU
perf: arm_cspmu: Support implementation specific validation
perf: arm_cspmu: Support implementation specific filters
perf: arm_cspmu: Split 64-bit write to 32-bit writes
perf: arm_cspmu: Separate Arm and vendor module
* for-next/sve-remove-pseudo-regs:
: arm64/fpsimd: Remove the vector length pseudo registers
arm64/sve: Remove SMCR pseudo register from cpufeature code
arm64/sve: Remove ZCR pseudo register from cpufeature code
* for-next/backtrace-ipi:
: Add IPI for backtraces/kgdb, use NMI
arm64: smp: Don't directly call arch_smp_send_reschedule() for wakeup
arm64: smp: avoid NMI IPIs with broken MediaTek FW
arm64: smp: Mark IPI globals as __ro_after_init
arm64: kgdb: Implement kgdb_roundup_cpus() to enable pseudo-NMI roundup
arm64: smp: IPI_CPU_STOP and IPI_CPU_CRASH_STOP should try for NMI
arm64: smp: Add arch support for backtrace using pseudo-NMI
arm64: smp: Remove dedicated wakeup IPI
arm64: idle: Tag the arm64 idle functions as __cpuidle
irqchip/gic-v3: Enable support for SGIs to act as NMIs
* for-next/kselftest:
: Various arm64 kselftest updates
kselftest/arm64: Validate SVCR in streaming SVE stress test
* for-next/misc:
: Miscellaneous patches
arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer
arm64: module: Fix PLT counting when CONFIG_RANDOMIZE_BASE=n
arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a helper
clocksource/drivers/arm_arch_timer: limit XGene-1 workaround
arm64: Remove system_uses_lse_atomics()
arm64: Mark the 'addr' argument to set_ptes() and __set_pte_at() as unused
arm64/mm: Hoist synchronization out of set_ptes() loop
arm64: swiotlb: Reduce the default size if no ZONE_DMA bouncing needed
* for-next/cpufeat-display-cores:
: arm64 cpufeature display enabled cores
arm64: cpufeature: Change DBM to display enabled cores
arm64: cpufeature: Display the set of cores with a feature
|
|
The GPU scheduler has now a variable number of run-queues, which are set up at
drm_sched_init() time. This way, each driver announces how many run-queues it
requires (supports) per each GPU scheduler it creates. Note, that run-queues
correspond to scheduler "priorities", thus if the number of run-queues is set
to 1 at drm_sched_init(), then that scheduler supports a single run-queue,
i.e. single "priority". If a driver further sets a single entity per
run-queue, then this creates a 1-to-1 correspondence between a scheduler and
a scheduled entity.
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Emma Anholt <emma@anholt.net>
Cc: etnaviv@lists.freedesktop.org
Cc: lima@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20231023032251.164775-1-luben.tuikov@amd.com
|
|
Merge series from Hans de Goede <hdegoede@redhat.com>:
Hi Mark,
As requested here is a v2 of my series to add various quirks
to the bytcr_wm5102 Intel board driver to make it more flexible.
Changes in v2:
- Dropped 2 already merged patches
- Rebased on top of broonie/sound/for-6.7
Regards,
Hans
Hans de Goede (4):
ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_SSP2 quirk
ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_MCLK_19_2MHZ quirk
ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_OUT_MAP quirk
ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_IN_MAP quirk
sound/soc/intel/boards/bytcr_wm5102.c | 229 +++++++++++++++++++++++---
1 file changed, 202 insertions(+), 27 deletions(-)
--
2.41.0
|
|
Merge series from Nikita Travkin <nikita@trvn.ru>:
Some devices, such as Acer Aspire 1, can't use lpass dirrectly, but
instead must use adsp core to play sound. Since otherwise the hardware
is, usually, very similar across the devices on the same platform, it
makes sense to reuse the same boardfile.
This series refactors the sc7180.c slightly and adds the functions to
control clocks via adsp instead of controlling the hardware directly.
|
|
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Some codec drivers compare widget names with strcmp, ignoring
the component name prefix. If prefix is used, the comparisons start failing.
Except Qualcomm lpass-rx-macro, none of the patches were tested
on hardware.
|
|
Merge series from wangweidong.a@awinic.com:
Add the awinic,aw88399 property to the awinic,aw88395.yaml file.
Add i2c and amplifier registration for
aw88399 and their associated operation functions.
|
|
The existing code checks for the correct state transition after sending
a command. However, it is possible for the message box to return -1,
which indicates an error, if an error has occurred in the firmware.
We can detect if the error has occurred, and return a different error.
In addition, there is no recovering from a CSPL error, so the retry
mechanism is not needed in this case, and we can return immediately.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231026150558.2105827-9-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
CSPL firmware should be in RUNNING or PAUSED state after loading.
If not, the firmware has not been loaded correctly, and we can unload
it and pass the error up.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-8-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Given the part is about to reset due to system suspend, and we are
already in hibernate, there is no need to wake up the amp, just to get
it ready to be reset. We just need to ensure cs_dsp is ready for reset
by resetting the states.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-7-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
To ensure the chip has correctly reset during probe and system suspend,
we need to force a software reset, in case of systems where the
hardware reset is not available.
The software reset register was labelled as volatile but not readable,
however, it is readable, (just returns 0x0). Adding it to readable
registers means it will be correctly treated as volatile, and thus
will not be cached.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-6-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
During initial probe, after reset is asserted for the first time, the
driver goes through a boot process to ensure the amp is ready to be
used. This involves verifying a boot flag, as well as verifying the
chip ids.
This is necessary since it is possible for the amp to have been fully
reset by the system suspend calls.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-5-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
resume
To ensure we are in a known state, exiting from reset at the point of
probe or in system resume, assert reset before we de-assert it.
Since the BIOS may enter into a pre-boot environment to control the
amps (for example for boot beep), we need to ensure we start from a
known, reset state prior to probe or system resume.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-4-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|