summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-14ath10k: remove ath10k_vif_to_arvif()Amadeusz Sławiński
it adds unnecessary level of indirection, while we just access structure field Signed-off-by: Amadeusz Sławiński <amadeusz.slawinski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14usb: misc: add USB251xB/xBi Hi-Speed Hub Controller DriverRichard Leitner
This patch adds a driver for configuration of the Microchip USB251xB/xBi USB 2.0 hub controller series with USB 2.0 upstream connectivity, SMBus configuration interface and two to four USB 2.0 downstream ports. Furthermore add myself as a maintainer for this driver. The datasheet can be found at the manufacturers website, see [1]. All device-tree exposed configuration features have been tested on a i.MX6 platform with a USB2512B hub. [1] http://ww1.microchip.com/downloads/en/DeviceDoc/00001692C.pdf Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14usb: misc: usbtest: remove redundant check on retval < 0Colin Ian King
The check for retval being less than zero is always true since retval equal to -EPIPE at that point. Replace the existing conditional with just return retval. Detected with CoverityScan, CID#114349 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14staging:nvec:nvec_ps2.c: Prefering kzalloc(sizeof(*ser_dev)...) over ↵Arushi Singhal
kzalloc(sizeof(struct serio)...) Prefer kzalloc(sizeof(*ser_dev)...) over kzalloc(sizeof(struct serio)...) as reported by checkpatch.pl. Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14tpm xen: drop unneeded chip variableJulia Lawall
The call that used chip was dropped in 1f0f30e404b3. Drop the leftover declaration and initialization. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-14tpm: fix misspelled "facilitate" in module parameter descriptionDmitry Torokhov
I typoed "facilitate" as "faciltate" a few years back... Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-14tpm_tis: fix the error handling of init_tis()Wei Yongjun
Add the missing platform_driver_unregister() and remove the duplicate platform_device_unregister(force_pdev) in the error handling case. Fixes: 00194826e6be ("tpm_tis: Clean up the force=1 module parameter") Cc: stable@vger.kernel.org Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-14Staging: rtl8188eu: core/rtw_led.c: format line to reduce it below 80 charactersShishir Kulkarni
Fixes checkpatch.pl warning: "WARNING: line over 80 characters" Signed-off-by: Shishir Kulkarni <shishir.kulkarni.2307@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14net: fec: fix multicast filtering hardware setupRui Sousa
Fix hardware setup of multicast address hash: - Never clear the hardware hash (to avoid packet loss) - Construct the hash register values in software and then write once to hardware Signed-off-by: Rui Sousa <rui.sousa@nxp.com> Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14staging: bcm2835-audio: remove unused macroHendrik v. Raven
The VC_AUDIO_MAX_MSG_LEN macro is not used by anything in the bcm2835-audio driver. Signed-off-by: Hendrik v. Raven <hendrik@consetetur.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14staging: bcm2835-audio: Fixed checkpatch warning due to line spacingAbhijit Naik
bcm2835-vchiq.c: fixing ERROR: Checkpatch warnings due to extra blank lines or absence of blank lines where needed. Signed-off-by: Abhijit Naik <abhijitnaik27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14staging: nvec: Fix incorrect type of i2c addressFranck Demathieu
The i2c address is unsigned according to the dt-bindings. Fix sparse issue (-Wtypesign): drivers/staging/nvec/nvec.c:781:35: warning: incorrect type in argument 3 (different signedness) drivers/staging/nvec/nvec.c:781:35: expected unsigned int [usertype] *out_value drivers/staging/nvec/nvec.c:781:35: got int *<noident> Signed-off-by: Franck Demathieu <fdemathieu@gmail.com> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14staging: fsl-mc: Add missing headerBogdan Purcareata
Compiling the fsl-mc bus driver will yield a couple of static analysis errors: warning: symbol 'fsl_mc_msi_domain_alloc_irqs' was not declared warning: symbol 'fsl_mc_msi_domain_free_irqs' was not declared. warning: symbol 'its_fsl_mc_msi_init' was not declared. warning: symbol 'its_fsl_mc_msi_cleanup' was not declared. Since these are properly declared, but the header is not included, add it in the source files. This way the symbol is properly exported. Signed-off-by: Bogdan Purcareata <bogdan.purcareata@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14Merge branch 'ipv6-v4mapped'David S. Miller
Jonathan T. Leighton says: ==================== IPv4-mapped on wire, :: dst address issue Under some circumstances IPv6 datagrams are sent with IPv4-mapped IPv6 addresses as the source. Given an IPv6 socket bound to an IPv4-mapped IPv6 address, and an IPv6 destination address, both TCP and UDP will will send packets using the IPv4-mapped IPv6 address as the source. Per RFC 6890 (Table 20), IPv4-mapped IPv6 source addresses are not allowed in an IP datagram. The problem can be observed by attempting to connect() either a TCP or UDP socket, or by using sendmsg() with a UDP socket. The patch is intended to correct this issue for all socket types. linux follows the BSD convention that an IPv6 destination address specified as in6addr_any is converted to the loopback address. Currently, neither TCP nor UDP consider the possibility that the source address is an IPv4-mapped IPv6 address, and assume that the appropriate loopback address is ::1. The patch adds a check on whether or not the source address is an IPv4-mapped IPv6 address and then sets the destination address to either ::ffff:127.0.0.1 or ::1, as appropriate. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14ipv6: Handle IPv4-mapped src to in6addr_any dst.Jonathan T. Leighton
This patch adds a check on the type of the source address for the case where the destination address is in6addr_any. If the source is an IPv4-mapped IPv6 source address, the destination is changed to ::ffff:127.0.0.1, and otherwise the destination is changed to ::1. This is done in three locations to handle UDP calls to either connect() or sendmsg() and TCP calls to connect(). Note that udpv6_sendmsg() delays handling an in6addr_any destination until very late, so the patch only needs to handle the case where the source is an IPv4-mapped IPv6 address. Signed-off-by: Jonathan T. Leighton <jtleight@udel.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14ipv6: Inhibit IPv4-mapped src address on the wire.Jonathan T. Leighton
This patch adds a check for the problematic case of an IPv4-mapped IPv6 source address and a destination address that is neither an IPv4-mapped IPv6 address nor in6addr_any, and returns an appropriate error. The check in done before returning from looking up the route. Signed-off-by: Jonathan T. Leighton <jtleight@udel.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14spi: lantiq-ssc: add support for Lantiq SSC SPI controllerHauke Mehrtens
This driver supports the Lantiq SSC SPI controller in master mode. This controller is found on Intel (former Lantiq) SoCs like the Danube, Falcon, xRX200, xRX300. The hardware uses two hardware FIFOs one for received and one for transferred bytes. When the driver writes data into the transmit FIFO the complete word is taken from the FIFO into a shift register. The data from this shift register is then written to the wire. This driver uses the interrupts signaling the status of the FIFOs and not the shift register. It is also possible to use the interrupts for the shift register, but they will send a signal after every word. When using the interrupts for the shift register we get a signal when the last word is written into the shift register and not when it is written to the wire. After all FIFOs are empty the driver busy waits till the hardware is not busy any more and returns the transfer status. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-14staging: comedi: ni_pcimio: remove unused variable 'serial_number'Karthik Nayak
The struct 'ni_private' holds the variable 'serial_number' which post assignment is never used. Remove the variable and code pertaining to obtaining its value. As a side note, this also fixes the following sparse error: drivers/staging/comedi/drivers//ni_pcimio.c:1229:32: warning: incorrect type in assignment (different base types) drivers/staging/comedi/drivers//ni_pcimio.c:1229:32: expected restricted __be32 [usertype] serial_number drivers/staging/comedi/drivers//ni_pcimio.c:1229:32: got unsigned int Signed-off-by: Karthik Nayak <Karthik.188@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14staging: comedi: dyna_pci10xx: usleep_range is preferred over udelaySaber Rezvani
Fix the checkpatch.pl issue: CHECK: usleep_range is preferred over udelay Signed-off-by: Saber Rezvani <irsaber@gmail.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14staging: comedi: s626: usleep_range is preferred over udelaySaber Rezvani
Fix the checkpatch.pl issue: CHECK: usleep_range is preferred over udelay Signed-off-by: Saber Rezvani <irsaber@gmail.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14staging: comedi: ni_pcidio.c: Spaces preferred around operatorsSaber Rezvani
Fix the checkpatch.pl issue: CHECK: spaces preferred around that '|' (ctx:VxV) Signed-off-by: Saber Rezvani <irsaber@gmail.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14staging: comedi: ni_pcidio: blank line issuesSaber Rezvani
Fix the checkpatch.pl issue: CHECK: Please use a blank line after function/struct/union/enum declarations Signed-off-by: Saber Rezvani <irsaber@gmail.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14net/mlx5e: Disable preemption when doing TC statistics upcallOr Gerlitz
When called by HW offloading drivers, the TC action (e.g net/sched/act_mirred.c) code uses this_cpu logic, e.g _bstats_cpu_update(this_cpu_ptr(a->cpu_bstats), bytes, packets) per the kernel documention, preemption should be disabled, add that. Before the fix, when running with CONFIG_PREEMPT set, we get a BUG: using smp_processor_id() in preemptible [00000000] code: tc/3793 asserion from the TC action (mirred) stats_update callback. Fixes: aad7e08d39bd ('net/mlx5e: Hardware offloaded flower filter statistics support') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14net:dsa:mv88e6xxx: use watchdog ops for 6097 chipVolodymyr Bendiuga
mv88e6097 chip requires watchdog_ops to be set. Signed-off-by: Volodymyr Bendiuga <volodymyr.bendiuga@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14IB/mlx4: Take source GID by index from HW GID tableTalat Batheesh
Previously, we used the HW GID index in order to search the source GID in the software GID cached table. In some cases, for example when the MAC Address of the network interface is changed, the GID cached table saves the old-IPv6-link-local GID at the end of the table. When returning the old MAC address, the software GID cached table tries to add the new IPv6-link-local GID, and when it identifies that the GID already exists, the software GID cached does not add it. Thus a mismatch occurs between the HW and the SW GID tables. It resulted with sending traffic with the wrong source GID. This commit fixes the issue by taking both from the HW table. The problem can be reproduced with the following scenario: Client: # ifconfig ens6 2.2.2.5 # ifconfig ens6 inet6 add 2001:0db8:0:f101::5/64 # ifconfig ens6 hw ether f4:52:14:61:a0:71 # ifconfig ens6 inet6 del 2001:0db8:0:f101::5/64 # ifconfig ens6 inet6 add 2001:0db8:0:f101::5/64 # ucmatose -f ipv6 -b 2001:0db8:0:f101::5 -s 2001:0db8:0:f101::6 -p 20156 Server: # ucmatose -f ipv6 -b 2001:0db8:0:f101::6 -p 20156 Fixes: 4c3eb3ca1396 ('IB/mlx4: Add VLAN support for IBoE') Signed-off-by: Talat Batheesh <talatb@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Fix blue flame buffer size calculationEli Cohen
A blue flame register is comprised of two buffers of equal size. Fixes: 5fe9dec0d0454 ("IB/mlx5: Use blue flame register allocator in mlx5_ib") Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx4: Remove unused variable from function declarationLeon Romanovsky
Remove unused netw_view parameter from eth_link_query_port() function. Reported-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14sched: Fix accidental removal of errout gotoJiri Pirko
Bring back the goto that was removed by accident. Reported-by: Colin Ian King <colin.king@canonical.com> Fixes: 40c81b25b16c ("sched: check negative err value to safe one level of indent") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14IB: Query ports via the core instead of direct into the driverOr Gerlitz
Change the drivers to call ib_query_port in their get port immutable handler instead of their own query port handler. Doing this required to set the core cap flags of this device before the ib_query_port call is made, since the IB core might need these caps to serve the port query. Drivers are ensured by the IB core that the port attributes passed to the port query verb implementation are zero, and hence we removed the zeroing from the drivers. This patch doesn't add any new functionality. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Acked-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB: Add protocol for USNICOr Gerlitz
Add protocol definition for the proprietary the USNIC driver. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx4: Support raw packet protocolOr Gerlitz
Mark support for the new raw packet protocol on Eth ports. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Support raw packet protocolOr Gerlitz
Mark support for the new raw packet protocol on Eth ports. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/core: Add raw packet protocolOr Gerlitz
Define raw packet protocol which comes to denote this port supports working with raw ethernet frames, e.g as done with RAW_PACKET QPs. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Add implicit MR supportArtemy Kovalyov
Add implicit MR, covering entire user address space. The MR is implemented as an indirect KSM MR consisting of 1GB direct MRs. Pages and direct MRs are added/removed to MR by ODP. Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Expose MR cache for mlx5_ibArtemy Kovalyov
Allow other parts of mlx5_ib to use MR cache mechanism. * Add new functions mlx5_mr_cache_alloc and mlx5_mr_cache_free * Traditional MTT MKey buckets are limited by MAX_UMR_CACHE_ENTRY Additinal buckets may be added above. Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Add null_mkey accessArtemy Kovalyov
Add mlx5_cmd_null_mkey() function to access null_mkey information from firmware. Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/umem: Indicate that process is being terminatedArtemy Kovalyov
When process is killed while pagefault operation still in progress - function will fail. In this specific case we don't want any warnings in dmesg to avoid log analyzers false alerts. So we need distinct error code for this case. Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/umem: Update on demand page (ODP) supportArtemy Kovalyov
Currently ODP MR may explicitly register virtual address space area of limited length. This change allows MR to cover entire process virtual address space dynamicaly adding/removing translation entries to device MTT. Add following changes to support implicit MR: * Allow umem to be zero size to back-up implicit MR. * Add new function ib_alloc_odp_umem() to add virtual memory regions to implicit MR dynamically on demand. * Add new function rbt_ib_umem_lookup() to find dynamically added virtual memory regions. * Expose function rbt_ib_umem_for_each_in_range() to other modules and make it safe Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/core: Add implicit MR flagArtemy Kovalyov
Add flag IB_ODP_SUPPORT_IMPLICIT indicating implicit MR supported. Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Support creation of a WQ with scatter FCS offloadNoa Osherovich
Add support for creation of a WQ with scatter FCS capability, if this capability is supported by the hardware. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Enable QP creation with cvlan offloadNoa Osherovich
Enable creating a RAW Ethernet QP with cvlan stripping offload when it's supported by the hardware. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Enable WQ creation and modification with cvlan offloadNoa Osherovich
Allow creating a WQ with cvlan stripping considering device's capabilities. The default value was fixed to disable vlan stripping till was asked explicitly. In addition, allow modification of a WQ to turn on/off this property. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Expose vlan offloads capabilitiesNoa Osherovich
Check device's capabilities and report which raw packet capabilities are supported. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/uverbs: Enable QP creation with cvlan offloadNoa Osherovich
Enable user applications to create a QP with cvlan stripping offload. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/uverbs: Enable WQ creation and modification with cvlan offloadNoa Osherovich
Enable user space application via WQ creation and modification to turn on and off cvlan offload. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/uverbs: Expose vlan offloads capabilitiesNoa Osherovich
Expose raw packet capabilities to user space as part of query device. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/core: Add scatter FCS flag to use in WQ creationNoa Osherovich
Add a new creation flag to set the scatter FCS capability of a WQ. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/core: Enable QP creation with cvlan offloadNoa Osherovich
Add a QP creation flag to support cvlan stripping, it's applicable for RAW Ethernet QP. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/core: Enable WQ creation and modification with cvlan offloadNoa Osherovich
Enable WQ creation and modification with cvlan stripping offload. This includes: - Adding WQ creation flags. - Extending modify WQ to get flags and flags mask to enable turning it on and off. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/core: Expose vlan offloads capabilitiesNoa Osherovich
Expose raw packet capabilities in the core layer to enable a device to report it. Two existing capabilities, scatter FCS and IP CSUM were added to this field for a better user experience by exposing the raw packet caps from one location. This field will serve also for future capabilities for raw packet QP. A new capability was introduced - cvlan stripping, which is the device's ability to remove cvlan tag from an incoming packet and report it in the matching work completion. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-23 06:02:22 +0000