summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-31drm/i915/icl: Power down DSI panelMadhav Chauhan
This patch sends command and executes display off, assert reset, power off VBT seqeuences to power down DSI panel. Patch also adds high level function to wrap all the panel sepcific programming during DSI disabling. Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/efdafbf6b4d31123738b87b2d8264a9b5553eb32.1540900289.git.jani.nikula@intel.com
2018-10-31drm/i915/icl: Disable DSI transcodersMadhav Chauhan
This patch disables transcoders by writing to TRANS_CONF registers for each DSI ports. v2 by Jani: - Wait for pipeconf active to go low Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c76035309fa721322cf9c1ca7fc42b822937c2f3.1540900289.git.jani.nikula@intel.com
2018-10-31drm/i915/icl: Turn OFF panel backlightMadhav Chauhan
This patch disbles backlight of DSI panel by using VBT BACKLIGHT_OFF sequence and panel specific disable functions. Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/93cfbb198104deef4a281bbdef721385e4b6d954.1540900289.git.jani.nikula@intel.com
2018-10-31drm/i915/icl: Turn ON panel backlightMadhav Chauhan
This patch enables backlight of DSI panel by using VBT BACKLIGHT_ON sequence and panel specific functions. Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/05987eea297689af0b9defcf745a921f76f9011d.1540900289.git.jani.nikula@intel.com
2018-10-31drm/i915/icl: Wait for header/payload credits releaseMadhav Chauhan
Driver needs payload/header credits for sending any command and data over DSI link. These credits are released once command or data sent to link. This patch adds functions to wait for releasing of payload and header credits. As per BSPEC, driver needs to ensure that all of commands/data has been dispatched to panel before the transcoder is enabled. This patch implement those steps i.e. sending NOP DCS command, wait for header/payload credit to be released etc. v2 by Jani: - squash the credit wait helpers patch with the first user - pass dev_priv to the credit wait helpers - bikeshed credit helper names - wait for *at least* the current maximum number of credits - indentation fix - add helpers for credits available Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/84bc509beabf2a2d1324a9f2a67ab4ebe05b10a6.1540900289.git.jani.nikula@intel.com
2018-10-31drm/i915/ringbuffer: change header SPDX identifier to MITJonathan Gray
Commit b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") added "SPDX-License-Identifier: GPL-2.0" to files which previously had no license, change this to MIT for intel_ringbuffer.h matching the license text of intel_ringbuffer.c. Signed-off-by: Jonathan Gray <jsg@jsg.id.au> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181031005331.20775-1-jsg@jsg.id.au
2018-10-31drm/i915/icl: Power on DSI panelMadhav Chauhan
This patch execute poweron, deassert reset, display on VBT sequences and send TURN_ON DSI command to panel for powering it up. Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8acb06fa634fe9637fdc09a3f5d2588b9138224f.1540900289.git.jani.nikula@intel.com
2018-10-31powerpc/xmon: Relax frame size for clangJoel Stanley
When building with clang (8 trunk, 7.0 release) the frame size limit is hit: arch/powerpc/xmon/xmon.c:452:12: warning: stack frame size of 2576 bytes in function 'xmon_core' [-Wframe-larger-than=] Some investigation by Naveen indicates this is due to clang saving the addresses to printf format strings on the stack. While this issue is investigated, bump up the frame size limit for xmon when building with clang. Link: https://github.com/ClangBuiltLinux/linux/issues/252 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-31drm/i915/icl: Set max return packet size for DSI panelMadhav Chauhan
This patch programs maximum size of the payload transmitted from peripheral back to the host processor using short packet as a part of panel programming. v2: Rebase v3 by Jani: - Add FIXME note. Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ed9df910326adf32eb2bc1cd1a5097d0dda94da8.1540900289.git.jani.nikula@intel.com
2018-10-31drm/i915/dsi: move connector mode functions to common fileMadhav Chauhan
Move DSI connector functions to intel_dsi.c and make them available to both legacy and ICL DSI. v2 by Jani: - Move the functions to intel_dsi.c - Don't reuse intel_dsi_connector_destroy() Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/99244c6edf4a26ef2e279c7160d22dbbb5cd95f2.1540900289.git.jani.nikula@intel.com
2018-10-31drm/i915/icl: Move dsi host init code to common fileMadhav Chauhan
This patch moves intl_dsi_host_init() code to intel_dsi.c so that legacy and gen11 DSI code can share this code. v2 by Jani: - Move the shared stuff to intel_dsi.c Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1ee42b2d3c639e3f3c14a2c1595b8778901574d4.1540900289.git.jani.nikula@intel.com
2018-10-31drm/i915/gvt: Handle values of EDP_PSR_IMR and EDP_PSR_IIRLonghe Zheng
GVT-g only simulates DP port for guest and leaves EDP_PSR_IMR and EDP_PSR_IIR registers as default MMIO read/write. So guest won't get expected initial values of these registers when initializing the gpu driver, which results in following warning and logs. -------- Interrupt register 0x64838 is not zero: 0xffffffff WARNING: CPU: 1 PID: 157 at drivers/gpu/drm/i915/i915_irq.c:177 gen3_assert_iir_is_zero+0x38/0xa0 Call Trace: gen8_de_irq_postinstall+0xa7/0x400 gen8_irq_postinstall+0x27/0x80 drm_irq_install+0xbc/0x140 i915_driver_load+0xa9d/0xd50 -------- Because GVT-g does not handle EDP(embedded DP) simulation for guests, always set EDP_PSR_IMR and EDP_PSR_IIR to value 0. Signed-off-by: Longhe Zheng <longhe.zheng@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-10-31drm/i915/gvt: correct mask setting for CSFE_CHICKEN1Xinyun Liu
CSFE_CHICKEN1(0x20d4) needs access with mask. This is caught in AcrnGT conformance check test: [drm:intel_gvt_vgpu_conformance_check] *ERROR* gvt: vgpu1 unconformance mmio 0x20d4:0x40004,0x4 Signed-off-by: Xinyun Liu <xinyun.liu@intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-10-31drm/i915/gvt: support inconsecutive partial gtt entry writeHang Yuan
Previously we assumed two 4-byte writes to the same PTE coming in sequence. But recently we observed inconsecutive partial write happening as well. So this patch enhances the previous solution. It now uses a list to save more partial writes. If one partial write can be combined with another one in the list to construct a full PTE, update its shadow entry. Otherwise, save the partial write in the list. v2: invalidate old entry and flush ggtt (Zhenyu) v3: split old ggtt page unmap to another patch (Zhenyu) v4: refine codes (Zhenyu) Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com> Cc: Yan Zhao <yan.y.zhao@intel.com> Cc: Xiaolin Zhang <xiaolin.zhang@intel.com> Cc: Zhenyu Wang <zhenyu.z.wang@intel.com> Reviewed-by: Xiaolin Zhang <xiaolin.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-10-31drm/i915/selftest: test aligned offsets for 64KMatthew Auld
When using softpin it's not enough to just pad the vma size, we also need to ensure the vma offset is at the start of the pt boundary, if we plan to utilize 64K pages. Therefore to improve test coverage we should use both aligned and unaligned gtt offsets in igt_write_huge. Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181029203734.21936-1-matthew.auld@intel.com
2018-10-31drm/i915/gtt: Revert "Disable read-only support under GVT"Hang Yuan
This reverts commit c9e666880de5a1fed04dc412b046916d542b72dd. Checked GVT codes that guest PPGTT PTE flag bits are propagated to shadow PTE. Read/write bit is not changed. Further tested by i915 self-test case "igt_ctx_readonly". No error or GPU hang was detected. So enable read-only support under GVT. Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com> Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1540883281-11359-1-git-send-email-hang.yuan@linux.intel.com Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2018-10-31selftests: powerpc: Fix warning for security subdirJoel Stanley
typing 'make' inside tools/testing/selftests/powerpc gave a build warning: BUILD_TARGET=tools/testing/selftests/powerpc/security; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C security all make[1]: Entering directory 'tools/testing/selftests/powerpc/security' ../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory make[1]: *** No rule to make target '../../../../scripts/subarch.include'. make[1]: Failed to remake makefile '../../../../scripts/subarch.include'. The build is one level deeper than lib.mk thinks it is. Set top_srcdir to set things straight. Note that the test program is still built. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-30drm/tinydrm: Fix setting of the column/page end addresses.Eric Anholt
If the clipped dirty region's x/y happened to align to 256, we would have set the top 8 bits wrong. Noticed by inspection, not by reproducing a bug. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181024184313.2967-4-eric@anholt.net Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
2018-10-30drm: Add an hx8367d tinydrm driver.Eric Anholt
I want to sort out support for tinydrm in vc4, so I needed to get a tinydrm-appropriate panel working and this is what I had on hand. This is derived from a combination of ili9341.c from tinydrm and fb_hx8357d.c from staging's fbtft. v2: Write my own register defs from the spec to not need the header from fbtft. Fix spi device string to enable module autoloading. (Suggestions by Noralf) Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181024184313.2967-3-eric@anholt.net Reviewed-by: Noralf Trønnes <noralf@tronnes.org> (v1)
2018-10-30dt-bindings: new binding for Himax HX8357D display panelsEric Anholt
This adds a new binding for Himax HX8357D display panels. It includes a compatible string for one display (more can be added in the future). The YX350HV15 panel[1] is found in the Adafruit PiTFT 3.5" Touch Screen for Raspberry Pi. [1] https://learn.adafruit.com/adafruit-pitft-3-dot-5-touch-screen-for-raspberry-pi/downloads This binding is closely modeled after the ili9341 binding, for a similar product from adafruit. The primary difference is that the hx8357d doesn't have a reset line that I can find in the schematics. v2: Document the "reg" property (requested by Rob), fix commit message typo (Noralf) Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181024184313.2967-2-eric@anholt.net Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Noralf Trønnes <noralf@tronnes.org>
2018-10-30bpf: tcp_bpf_recvmsg should return EAGAIN when nonblocking and no dataJohn Fastabend
We return 0 in the case of a nonblocking socket that has no data available. However, this is incorrect and may confuse applications. After this patch we do the correct thing and return the error EAGAIN. Quoting return codes from recvmsg manpage, EAGAIN or EWOULDBLOCK The socket is marked nonblocking and the receive operation would block, or a receive timeout had been set and the timeout expired before data was received. Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-30tools/bpf: add unlimited rlimit for flow_dissector_loadYonghong Song
On our test machine, bpf selftest test_flow_dissector.sh failed with the following error: # ./test_flow_dissector.sh bpffs not mounted. Mounting... libbpf: failed to create map (name: 'jmp_table'): Operation not permitted libbpf: failed to load object 'bpf_flow.o' ./flow_dissector_load: bpf_prog_load bpf_flow.o selftests: test_flow_dissector [FAILED] Let us increase the rlimit to remove the above map creation failure. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-30dt-bindings: arm: Explain capacities-dmips-mhz calculations in exampleViresh Kumar
The example contains two values for the capacity currently, 446 in text and 578 in code. The numbers are all correct but can confuse some of the readers. This patch tries to explain how the numbers are calculated to avoid same confusion going forward. Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2018-10-30drm/amd/powerplay: revise Vega20 pptable version checkEvan Quan
Tell the version numbers when the pptable versions do not match. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-30drm/amd/display: set backlight level limit to 1Guttula, Suresh
This patch will work as workaround for silicon limitation related to PWM dutycycle when the backlight level goes to 0. Actually PWM value is 16 bit value and valid range from 1-65535. when ever user requested to set this PWM value to 0 which is not fall in the range, in VBIOS taken care this by limiting to 1. This patch here will do the same. Either driver or VBIOS can not pass 0 value as it is not a valid range for PWM and it will give a high PWM pulse which is not the intended behaviour as per HW constraints. Signed-off-by: suresh guttula <suresh.guttula@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-30mtip32xx: clean an indentation issue, remove extraneous tabsColin Ian King
Trivial fix to clean up an indentation issue, remove tabs Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-30Merge tag 'nfsd-4.20' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd updates from Bruce Fields: "Olga added support for the NFSv4.2 asynchronous copy protocol. We already supported COPY, by copying a limited amount of data and then returning a short result, letting the client resend. The asynchronous protocol should offer better performance at the expense of some complexity. The other highlight is Trond's work to convert the duplicate reply cache to a red-black tree, and to move it and some other server caches to RCU. (Previously these have meant taking global spinlocks on every RPC) Otherwise, some RDMA work and miscellaneous bugfixes" * tag 'nfsd-4.20' of git://linux-nfs.org/~bfields/linux: (30 commits) lockd: fix access beyond unterminated strings in prints nfsd: Fix an Oops in free_session() nfsd: correctly decrement odstate refcount in error path svcrdma: Increase the default connection credit limit svcrdma: Remove try_module_get from backchannel svcrdma: Remove ->release_rqst call in bc reply handler svcrdma: Reduce max_send_sges nfsd: fix fall-through annotations knfsd: Improve lookup performance in the duplicate reply cache using an rbtree knfsd: Further simplify the cache lookup knfsd: Simplify NFS duplicate replay cache knfsd: Remove dead code from nfsd_cache_lookup SUNRPC: Simplify TCP receive code SUNRPC: Replace the cache_detail->hash_lock with a regular spinlock SUNRPC: Remove non-RCU protected lookup NFS: Fix up a typo in nfs_dns_ent_put NFS: Lockless DNS lookups knfsd: Lockless lookup of NFSv4 identities. SUNRPC: Lockless server RPCSEC_GSS context lookup knfsd: Allow lockless lookups of the exports ...
2018-10-30drm/tinydrm: Advertise that we can do only DRM_FORMAT_MOD_LINEAR.Eric Anholt
Without this, the xserver relies on what the 3D driver exposes and assumes that the display can handle it, and then the DRM driver happily tries to scan out a tiled format. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181025162635.6689-1-eric@anholt.net Acked-by: Noralf Trønnes <noralf@tronnes.org>
2018-10-30Merge tag 'cramfs_fixes' of git://git.linaro.org/people/nicolas.pitre/linuxLinus Torvalds
Pull cramfs fixes from Nicolas Pitre: "Make the Cramfs code more robust against filesystem corruptions, plus trivial indentation fixes" * tag 'cramfs_fixes' of git://git.linaro.org/people/nicolas.pitre/linux: Cramfs: trivial whitespace fixes Cramfs: fix abad comparison when wrap-arounds occur
2018-10-30net: mvpp2: Fix affinity hint allocationMarc Zyngier
The mvpp2 driver has the curious behaviour of passing a stack variable to irq_set_affinity_hint(), which results in the kernel exploding the first time anyone accesses this information. News flash: userspace does, and irqbalance will happily take the machine down. Great stuff. An easy fix is to track the mask within the queue_vector structure, and to make sure it has the same lifetime as the interrupt itself. Fixes: e531f76757eb ("net: mvpp2: handle cases where more CPUs are available than s/w threads") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-30Cramfs: trivial whitespace fixesNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@linaro.org>
2018-10-30Cramfs: fix abad comparison when wrap-arounds occurNicolas Pitre
It is possible for corrupted filesystem images to produce very large block offsets that may wrap when a length is added, and wrongly pass the buffer size test. Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by: Nicolas Pitre <nico@linaro.org> Cc: stable@vger.kernel.org
2018-10-30net/mlx4_en: add a missing <net/ip.h> includeEric Dumazet
Abdul Haleem reported a build error on ppc : drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: `struct iphdr` declared inside parameter list [enabled by default] struct iphdr *iph) ^ drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/ethernet/mellanox/mlx4/en_rx.c: In function get_fixed_ipv4_csum: drivers/net/ethernet/mellanox/mlx4/en_rx.c:586:20: error: dereferencing pointer to incomplete type __u8 ipproto = iph->protocol; ^ Fixes: 55469bc6b577 ("drivers: net: remove <net/busy_poll.h> inclusion when not needed") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-30drm/i915/icl: Enable DC9 as lowest possible state during screen-offAnimesh Manna
ICL supports DC5, DC6, and DC9. Enable DC9 during screen-off, and enable DC5/6 when appropriate. v2: (James Ausmus) - Also handle ICL as GEN9_LP in i915_drm_suspend_late and i915_drm_suspend_early - Add DC9 to gen9_dc_mask for ICL - Re-order GEN checks for newest platform first - Use INTEL_GEN instead of INTEL_INFO->gen - Use INTEL_GEN >= 11 instead of IS_ICELAKE - Consolidate GEN checks v3: (James Ausmus) - Also allow DC6 for ICL (Imre, Art) - Simplify !(GEN >= 11) to GEN < 11 (Imre) v4: (James Ausmus) - Don't call intel_power_sequencer_reset after DC9 for Gen11+, as the PPS regs are Always On - Rebase against upstream changes v5: (Anusha Srivatsa) - rebased against the latest upstream changes. v6: (Anusha Srivatsa) - rebased.Use INTEL_GEN consistently. - Simplify the code (Rodrigo) v7: rebased. Change order according to platforms(Jyoti) v8: rebased. Change the check from platform specific to HAS_PCH_SPLIT(). Add comment in code to be more clear.(Rodrigo) Cc: Imre Deak <imre.deak@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: James Ausmus <james.ausmus@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Tested-by: Jyoti Yadav <jyoti.r.yadav@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181029221410.4423-1-anusha.srivatsa@intel.com
2018-10-30Merge tag 'trace-v4.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "The biggest change here is the updates to kprobes Back in January I posted patches to create function based events. These were the events that you suggested I make to allow developers to easily create events in code where no trace event exists. After posting those changes for review, it was suggested that we implement this instead with kprobes. The problem with kprobes is that the interface is too complex and needs to be simplified. Masami Hiramatsu posted patches in March and I've been playing with them a bit. There's been a bit of clean up in the kprobe code that was inspired by the function based event patches, and a couple of enhancements to the kprobe event interface. - If the arch supports it (we added support for x86), you can place a kprobe event at the start of a function and use $arg1, $arg2, etc to reference the arguments of a function. (Before you needed to know what register or where on the stack the argument was). - The second is a way to see array of events. For example, if you reference a mac address, you can add: echo 'p:mac ip_rcv perm_addr=+574($arg2):x8[6]' > kprobe_events And this will produce: mac: (ip_rcv+0x0/0x140) perm_addr={0x52,0x54,0x0,0xc0,0x76,0xec} Other changes include - Exporting trace_dump_stack to modules - Have the stack tracer trace the entire stack (stop trying to remove tracing itself, as we keep removing too much). - Added support for SDT in uprobes" [ SDT - "Statically Defined Tracing" are userspace markers for tracing. Let's not use random TLA's in explanations unless they are fairly well-established as generic (at least for kernel people) - Linus ] * tag 'trace-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (24 commits) tracing: Have stack tracer trace full stack tracing: Export trace_dump_stack to modules tracing: probeevent: Fix uninitialized used of offset in parse args tracing/kprobes: Allow kprobe-events to record module symbol tracing/kprobes: Check the probe on unloaded module correctly tracing/uprobes: Fix to return -EFAULT if copy_from_user failed tracing: probeevent: Add $argN for accessing function args x86: ptrace: Add function argument access API tracing: probeevent: Add array type support tracing: probeevent: Add symbol type tracing: probeevent: Unify fetch_insn processing common part tracing: probeevent: Append traceprobe_ for exported function tracing: probeevent: Return consumed bytes of dynamic area tracing: probeevent: Unify fetch type tables tracing: probeevent: Introduce new argument fetching code tracing: probeevent: Remove NOKPROBE_SYMBOL from print functions tracing: probeevent: Cleanup argument field definition tracing: probeevent: Cleanup print argument functions trace_uprobe: support reference counter in fd-based uprobe perf probe: Support SDT markers having reference counter (semaphore) ...
2018-10-30Merge tag 'trace-v4.19-rc8-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Masami had a couple more fixes to the synthetic events. One was a proper error return value, and the other is for the self tests" * tag 'trace-v4.19-rc8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: selftests/ftrace: Fix synthetic event test to delete event correctly tracing: Return -ENOENT if there is no target synthetic event
2018-10-30Merge tag 'for-linus-4.20a-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Only several small fixes and cleanups this time" * tag 'for-linus-4.20a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: drop writing error messages to xenstore xen/pvh: don't try to unplug emulated devices add myself as reviewer for Xen support in Linux xen: remove redundant 'default n' from Kconfig xen/balloon: Support xend-based toolstack xen/pvh: increase early stack size xen: make xen_qlock_wait() nestable xen: fix race in xen_qlock_wait() xen/balloon: Grammar s/Is it/It is/ xen: Make XEN_BACKEND selectable by DomU
2018-10-30Merge tag 'acpi-4.20-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "Rework the handling of the P-unit semaphore on Intel Baytrail and Cherrytrail systems to avoid race conditions and excessive overhead related to it (Hans de Goede)" * tag 'acpi-4.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PMIC: xpower: Add depends on IOSF_MBI to Kconfig entry i2c: designware: Cleanup bus lock handling ACPI / PMIC: xpower: Block P-Unit I2C access during read-modify-write x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code
2018-10-30Merge tag 'pm-4.20-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These remove a questionable heuristic from the menu cpuidle governor, fix a recent build regression in the intel_pstate driver, clean up ARM big-Little support in cpufreq and fix up hung task watchdog's interaction with system-wide power management transitions. Specifics: - Fix build regression in the intel_pstate driver that doesn't build without CONFIG_ACPI after recent changes (Dominik Brodowski). - One of the heuristics in the menu cpuidle governor is based on a function returning 0 most of the time, so drop it and clean up the scheduler code related to it (Daniel Lezcano). - Prevent the arm_big_little cpufreq driver from being used on ARM64 which is not suitable for it and drop the arm_big_little_dt driver that is not used any more (Sudeep Holla). - Prevent the hung task watchdog from triggering during resume from system-wide sleep states by disabling it before freezing tasks and enabling it again after they have been thawed (Vitaly Kuznetsov)" * tag 'pm-4.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: kernel: hung_task.c: disable on suspend cpufreq: remove unused arm_big_little_dt driver cpufreq: drop ARM_BIG_LITTLE_CPUFREQ support for ARM64 cpufreq: intel_pstate: Fix compilation for !CONFIG_ACPI cpuidle: menu: Remove get_loadavg() from the performance multiplier sched: Factor out nr_iowait and nr_iowait_cpu
2018-10-30Merge tag 'for-4.20-part2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull more btrfs updates from David Sterba: "This contains a few minor updates and fixes that were under testing or arrived shortly after the merge window freeze, mostly stable material" * tag 'for-4.20-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix use-after-free when dumping free space Btrfs: fix use-after-free during inode eviction btrfs: move the dio_sem higher up the callchain btrfs: don't run delayed_iputs in commit btrfs: fix insert_reserved error handling btrfs: only free reserved extent if we didn't insert it btrfs: don't use ctl->free_space for max_extent_size btrfs: set max_extent_size properly btrfs: reset max_extent_size properly MAINTAINERS: update my email address for btrfs btrfs: delayed-ref: extract find_first_ref_head from find_ref_head Btrfs: fix deadlock when writing out free space caches Btrfs: fix assertion on fsync of regular file when using no-holes feature Btrfs: fix null pointer dereference on compressed write path error
2018-10-30perf top: Allow disabling the overwrite modeArnaldo Carvalho de Melo
In ebebbf082357 ("perf top: Switch default mode to overwrite mode") we forgot to leave a way to disable that new default, add a --overwrite option that can be disabled using --no-overwrite, since the code already in such a way that we can readily disable this mode. This is useful when investigating bugs with this mode like the recent report from David Miller where lots of unknown symbols appear due to disabling the events while processing them which disables all record types, not just PERF_RECORD_SAMPLE, which makes it impossible to resolve maps when we lose PERF_RECORD_MMAP records. This can be easily seen while building a kernel, when there are lots of short lived processes. Reported-by: David Miller <davem@davemloft.net> Acked-by: Kan Liang <kan.liang@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: ebebbf082357 ("perf top: Switch default mode to overwrite mode") Link: https://lkml.kernel.org/n/tip-oqgsz2bq4kgrnnajrafcdhie@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-30perf trace: Beautify mount's first pathname argArnaldo Carvalho de Melo
The pathname beautifiers so far support just one augmented pathname per syscall, so do it just for mount's first arg, later this will get fixed. With: # perf probe -l probe:vfs_getname (on getname_flags:73@acme/git/linux/fs/namei.c with pathname) # Later this will get added to augmented_syscalls.c (eBPF): In one xterm: # perf trace -e mount,umount 2687.331 ( 3.544 ms): mount/8892 mount(dev_name: /mnt, dir_name: 0x561f9ac184a0, type: 0x561f9ac1b170, flags: BIND) = 0 3912.126 ( 8.807 ms): umount/8895 umount2(name: /mnt) = 0 ^C# In the other: $ sudo mount --bind /proc /mnt $ sudo umount /mnt Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Benjamin Peterson <benjamin@python.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-qsvhrm2es635cl4zicqjeth2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-30perf trace: Beautify the umount's 'name' argumentArnaldo Carvalho de Melo
By using the SCA_FILENAME beautifier, that works when either the probe:vfs_getname probe is in place or with the eBPF program tools/perf/examples/bpf/augmented_syscalls.c: # perf probe -l probe:vfs_getname (on getname_flags:73@acme/git/linux/fs/namei.c with pathname) # perf trace -e umount 9630.332 ( 9.521 ms): umount/8082 umount2(name: /mnt) = 0 # The augmented syscalls one will be done in the next patch. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Benjamin Peterson <benjamin@python.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-hegbzlpd2nrn584l5jxn7sy2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-30perf trace: Consider syscall aliases tooArnaldo Carvalho de Melo
When trying to trace the 'umount' syscall on x86_64 I noticed that it was failing: # trace -e umount umount /mnt event syntax error: 'umount' \___ parser error Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # This is because in the x86-64 we have it just as 'umount2': $ grep umount arch/x86/entry/syscalls/syscall_64.tbl 166 common umount2 __x64_sys_umount $ So if the syscall name fails, try fallbacking to looking at the aliases we have in the syscall_fmts table to then re-lookup, now: # trace -e umount umount -f /mnt umount: /mnt: not mounted. 1.759 ( 0.004 ms): umount/18365 umount2(name: 0x55fbfcbc4480, flags: 1) = -1 EINVAL Invalid argument # Time to beautify the flags arg :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Benjamin Peterson <benjamin@python.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ukweodgzbmjd25lfkgryeft1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-30perf trace beauty: Beautify mount/umount's 'flags' argumentArnaldo Carvalho de Melo
# trace -e mount mount -o ro -t debugfs nodev /mnt 0.000 ( 1.040 ms): mount/27235 mount(dev_name: 0x5601cc8c64e0, dir_name: 0x5601cc8c6500, type: 0x5601cc8c6480, flags: RDONLY) = 0 # trace -e mount mount -o remount,relatime -t debugfs nodev /mnt 0.000 ( 2.946 ms): mount/27262 mount(dev_name: 0x55f4a73d64e0, dir_name: 0x55f4a73d6500, type: 0x55f4a73d6480, flags: REMOUNT|RELATIME) = 0 # trace -e mount mount -o remount,strictatime -t debugfs nodev /mnt 0.000 ( 2.934 ms): mount/27265 mount(dev_name: 0x5617f71d94e0, dir_name: 0x5617f71d9500, type: 0x5617f71d9480, flags: REMOUNT|STRICTATIME) = 0 # trace -e mount mount -o remount,suid,silent -t debugfs nodev /mnt 0.000 ( 0.049 ms): mount/27273 mount(dev_name: 0x55ad65df24e0, dir_name: 0x55ad65df2500, type: 0x55ad65df2480, flags: REMOUNT|SILENT) = 0 # trace -e mount mount -o remount,rw,sync,lazytime -t debugfs nodev /mnt 0.000 ( 2.684 ms): mount/27281 mount(dev_name: 0x561216055530, dir_name: 0x561216055550, type: 0x561216055510, flags: SYNCHRONOUS|REMOUNT|LAZYTIME) = 0 # trace -e mount mount -o remount,dirsync -t debugfs nodev /mnt 0.000 ( 3.512 ms): mount/27314 mount(dev_name: 0x55c4e7188480, dir_name: 0x55c4e7188530, type: 0x55c4e71884a0, flags: REMOUNT|DIRSYNC, data: 0x55c4e71884e0) = 0 # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Benjamin Peterson <benjamin@python.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-i5ncao73c0bd02qprgrq6wb9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-30perf trace beauty: Allow syscalls to mask an argument before considering itArnaldo Carvalho de Melo
Take mount's 'flags' arg, to cope with this semantic, as defined in do_mount in fs/namespace.c: /* * Pre-0.97 versions of mount() didn't have a flags word. When the * flags word was introduced its top half was required to have the * magic value 0xC0ED, and this remained so until 2.4.0-test9. * Therefore, if this magic number is present, it carries no * information and must be discarded. */ We need to mask this arg, and then see if it is zero, when we simply don't print the arg name and value. The next patch will use this for mount's 'flag' arg. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Benjamin Peterson <benjamin@python.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-btue14k5jemayuykfrwsnh85@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-30perf beauty: Introduce strarray__scnprintf_flags()Arnaldo Carvalho de Melo
Generalizing pkey_alloc__scnprintf_access_rights(), so that we can use it with other flags-like arguments, such as mount's mountflags argument. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Benjamin Peterson <benjamin@python.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-o3ymi3104m8moaz9865g09w9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-30perf beauty: Switch from GPL v2.0 to LGPL v2.1Arnaldo Carvalho de Melo
The intention is to have this as a library, since it is not perf specific at all. I did the switch for the files where I'm the only contributor, with the exception of a few lines changed by Jiri Olsa. Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-a04q6chdyjknm1hr305ulx8h@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-30perf beauty: Add a generator for MS_ mount/umount's flag constantsArnaldo Carvalho de Melo
It'll use tools/include copy of linux/fs.h to generate a table to be used by tools, initially by the 'mount' and 'umount' beautifiers in 'perf trace', but that could also be used to translate from a string constant to the integer value to be used in a eBPF or tracefs tracepoint filter. When used without any args it produces: $ tools/perf/trace/beauty/mount_flags.sh static const char *mount_flags[] = { [1 ? (ilog2(1) + 1) : 0] = "RDONLY", [2 ? (ilog2(2) + 1) : 0] = "NOSUID", [4 ? (ilog2(4) + 1) : 0] = "NODEV", [8 ? (ilog2(8) + 1) : 0] = "NOEXEC", [16 ? (ilog2(16) + 1) : 0] = "SYNCHRONOUS", [32 ? (ilog2(32) + 1) : 0] = "REMOUNT", [64 ? (ilog2(64) + 1) : 0] = "MANDLOCK", [128 ? (ilog2(128) + 1) : 0] = "DIRSYNC", [1024 ? (ilog2(1024) + 1) : 0] = "NOATIME", [2048 ? (ilog2(2048) + 1) : 0] = "NODIRATIME", [4096 ? (ilog2(4096) + 1) : 0] = "BIND", [8192 ? (ilog2(8192) + 1) : 0] = "MOVE", [16384 ? (ilog2(16384) + 1) : 0] = "REC", [32768 ? (ilog2(32768) + 1) : 0] = "SILENT", [16 + 1] = "POSIXACL", [17 + 1] = "UNBINDABLE", [18 + 1] = "PRIVATE", [19 + 1] = "SLAVE", [20 + 1] = "SHARED", [21 + 1] = "RELATIME", [22 + 1] = "KERNMOUNT", [23 + 1] = "I_VERSION", [24 + 1] = "STRICTATIME", [25 + 1] = "LAZYTIME", [26 + 1] = "SUBMOUNT", [27 + 1] = "NOREMOTELOCK", [28 + 1] = "NOSEC", [29 + 1] = "BORN", [30 + 1] = "ACTIVE", [31 + 1] = "NOUSER", }; $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Benjamin Peterson <benjamin@python.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-mgutbbkmip9gfnmd28ikg7xt@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-30tools include uapi: Grab a copy of linux/fs.hArnaldo Carvalho de Melo
We'll use it to create tables for the 'flags' argument to the 'mount' and 'umount' syscalls. Add it to check_headers.sh so that when a new protocol gets added we get a notification during the build process. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Benjamin Peterson <benjamin@python.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-yacf9jvkwfwg2g95r2us3xb3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-24 13:29:40 +0000