| Age | Commit message (Collapse) | Author |
|---|
|
Replace all uses of PPC64_ELF_ABI_v1 and PPC64_ELF_ABI_v2 by
resp CONFIG_PPC64_ELF_ABI_V1 and CONFIG_PPC64_ELF_ABI_V2.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ba13d59e8c50bc9aa6328f1c7f0c0d0278e0a3a7.1652074503.git.christophe.leroy@csgroup.eu
|
|
At the time being, we use CONFIG_CPU_LITTLE_ENDIAN and
CONFIG_CPU_BIG_ENDIAN to pass -mabi=elfv1 or elfv2 to
compiler, then define a PPC64_ELF_ABI_v1 or PPC64_ELF_ABI_v2
macro in asm/types.h based on _CALL_ELF define set by the compiler.
Make it more straight forward with a CONFIG option that
is directly usable.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1eca1addbc550167da9841c7340a010d0c4b2200.1652074503.git.christophe.leroy@csgroup.eu
|
|
Instead of returning -EPERM when patch_instruction() fails,
just return what patch_instruction returns.
That simplifies ftrace_modify_code():
0: 94 21 ff c0 stwu r1,-64(r1)
4: 93 e1 00 3c stw r31,60(r1)
8: 7c 7f 1b 79 mr. r31,r3
c: 40 80 00 30 bge 3c <ftrace_modify_code+0x3c>
10: 93 c1 00 38 stw r30,56(r1)
14: 7c 9e 23 78 mr r30,r4
18: 7c a4 2b 78 mr r4,r5
1c: 80 bf 00 00 lwz r5,0(r31)
20: 7c 1e 28 40 cmplw r30,r5
24: 40 82 00 34 bne 58 <ftrace_modify_code+0x58>
28: 83 c1 00 38 lwz r30,56(r1)
2c: 7f e3 fb 78 mr r3,r31
30: 83 e1 00 3c lwz r31,60(r1)
34: 38 21 00 40 addi r1,r1,64
38: 48 00 00 00 b 38 <ftrace_modify_code+0x38>
38: R_PPC_REL24 patch_instruction
Before:
0: 94 21 ff c0 stwu r1,-64(r1)
4: 93 e1 00 3c stw r31,60(r1)
8: 7c 7f 1b 79 mr. r31,r3
c: 40 80 00 4c bge 58 <ftrace_modify_code+0x58>
10: 93 c1 00 38 stw r30,56(r1)
14: 7c 9e 23 78 mr r30,r4
18: 7c a4 2b 78 mr r4,r5
1c: 80 bf 00 00 lwz r5,0(r31)
20: 7c 08 02 a6 mflr r0
24: 90 01 00 44 stw r0,68(r1)
28: 7c 1e 28 40 cmplw r30,r5
2c: 40 82 00 48 bne 74 <ftrace_modify_code+0x74>
30: 7f e3 fb 78 mr r3,r31
34: 48 00 00 01 bl 34 <ftrace_modify_code+0x34>
34: R_PPC_REL24 patch_instruction
38: 80 01 00 44 lwz r0,68(r1)
3c: 20 63 00 00 subfic r3,r3,0
40: 83 c1 00 38 lwz r30,56(r1)
44: 7c 63 19 10 subfe r3,r3,r3
48: 7c 08 03 a6 mtlr r0
4c: 83 e1 00 3c lwz r31,60(r1)
50: 38 21 00 40 addi r1,r1,64
54: 4e 80 00 20 blr
It improves ftrace activation/deactivation duration by about 3%.
Modify patch_instruction() return on failure to -EPERM in order to
match with ftrace expectations. Other users of patch_instruction()
do not care about the exact error value returned.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/49a8597230713e2633e7d9d7b56140787c4a7e20.1652074503.git.christophe.leroy@csgroup.eu
|
|
Inlining ftrace_modify_code(), it increases a bit the
size of ftrace code but brings 5% improvment on ftrace
activation.
Usually in C files we let gcc decide what to do but here
it really help to 'help' gcc to decide to inline, thought
we don't want to force it with an __always_inline that
would be too much for CONFIG_CC_OPTIMIZE_FOR_SIZE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1597a06d57cfc80e6853838c4066e799bf6c7977.1652074503.git.christophe.leroy@csgroup.eu
|
|
create_branch() is a good candidate for inlining because:
- Flags can be folded in.
- Range tests are likely to be already done.
Hence reducing the create_branch() to only a set of instructions.
So inline it.
It improves ftrace activation by 10%.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/69851cc9a7bf8f03d025e6d29e165f2d0bd3bb6e.1652074503.git.christophe.leroy@csgroup.eu
|
|
Use is_offset_in_branch_range() instead of create_branch()
to check if a target is within branch range.
This patch together with the previous one improves
ftrace activation time by 7%
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/912ae51782f5a53c44e435497c8c3fb5cc632387.1652074503.git.christophe.leroy@csgroup.eu
|
|
Test in is_offset_in_branch_range() and is_offset_in_cond_branch_range()
are simple tests that are worth inlining.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a05be0ccb7373e6a9789a1988fcd0c810f5f9269.1652074503.git.christophe.leroy@csgroup.eu
|
|
Since commit d5937db114e4 ("powerpc/code-patching: Fix patch_branch()
return on out-of-range failure") patch_branch() fails with -ERANGE
when trying to branch out of range.
No need to perform the test twice. Remove redundant create_branch()
calls.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/aa45fbad0b4b7493080835d8276c0cb4ce146503.1652074503.git.christophe.leroy@csgroup.eu
|
|
When we have CONFIG_DYNAMIC_FTRACE_WITH_ARGS,
prepare_ftrace_return() is called by ftrace_graph_func()
otherwise prepare_ftrace_return() is called from assembly.
Refactor prepare_ftrace_return() into a static
__prepare_ftrace_return() that will be called by both
prepare_ftrace_return() and ftrace_graph_func().
It will allow GCC to fold __prepare_ftrace_return() inside
ftrace_graph_func().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0d42deafe353980c66cf19d3132638c05ba9f4a9.1652074503.git.christophe.leroy@csgroup.eu
|
|
rtas_call must not be called with the MMU disabled because in case
of rtas error, log_error is called which requires MMU enabled. Add
a test and warning for this.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220308135047.478297-14-npiggin@gmail.com
|
|
PAPR specifies that RTAS may be called with MSR[RI] enabled if the
calling context is recoverable, and RTAS will manage RI as necessary.
Call the rtas entry point with RI enabled, and add a check to ensure
the caller has RI enabled.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220308135047.478297-10-npiggin@gmail.com
|
|
On 64-bit, PACA is saved in a SPRG so it does not need to be saved on
stack. We also don't need to mask off the top bits for real mode
addresses because the architecture does this for us.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220308135047.478297-8-npiggin@gmail.com
|
|
Disable MSR[EE] in C code rather than asm.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220308135047.478297-5-npiggin@gmail.com
|
|
The code was moved verbatim including whitespace cruft. Fix that.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220308135047.478297-4-npiggin@gmail.com
|
|
This symbol is marked nokprobe on 32-bit but not 64-bit, add it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220308135047.478297-3-npiggin@gmail.com
|
|
This makes working on the code a bit easier.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220308135047.478297-2-npiggin@gmail.com
|
|
Implement the AT_MINSIGSTKSZ AUXV entry, allowing userspace to
dynamically size stack allocations in a manner forward-compatible with
new processor state saved in the signal frame
For now these statically find the maximum signal frame size rather than
doing any runtime testing of features to minimise the size.
glibc 2.34 will take advantage of this, as will applications that use
use _SC_MINSIGSTKSZ and _SC_SIGSTKSZ.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
References: 94b07c1f8c39 ("arm64: signal: Report signal frame size to userspace via auxv")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220307182734.289289-2-npiggin@gmail.com
|
|
The sad tale of SIGSTKSZ and MINSIGSTKSZ is documented in glibc.git
commit f7c399cff5bd ("PowerPC SIGSTKSZ"), which explains why glibc
does not use the kernel defines for these constants.
Since then in fact there has been a further expansion of the signal
stack frame size on little-endian with linux commit
573ebfa6601f ("powerpc: Increase stack redzone for 64-bit userspace to
512 bytes"), which has caused it to exceed even the glibc defines.
See kernel commit 63dee5df43a3 ("powerpc: Allow 4224 bytes of stack
expansion for the signal frame") for more details of the history of the
expansion.
Increase MINSIGSTKSZ to 8192 which is double the current glibc value and
fits the current stack frame with room to grow. SIGSTKSZ is set to 4x
the minimum as convention.
glibc will have to be updated as well.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220307182734.289289-1-npiggin@gmail.com
|
|
The PowerPC vDSO uses $(CC) to link, which differs from the rest of the
kernel, which uses $(LD) directly. As a result, the default linker of
the compiler is used, which may differ from the linker requested by the
builder. For example:
$ make ARCH=powerpc LLVM=1 mrproper defconfig arch/powerpc/kernel/vdso/
...
$ llvm-readelf -p .comment arch/powerpc/kernel/vdso/vdso{32,64}.so.dbg
File: arch/powerpc/kernel/vdso/vdso32.so.dbg
String dump of section '.comment':
[ 0] clang version 14.0.0 (Fedora 14.0.0-1.fc37)
File: arch/powerpc/kernel/vdso/vdso64.so.dbg
String dump of section '.comment':
[ 0] clang version 14.0.0 (Fedora 14.0.0-1.fc37)
LLVM=1 sets LD=ld.lld but ld.lld is not used to link the vDSO; GNU ld is
because "ld" is the default linker for clang on most Linux platforms.
This is a problem for Clang's Link Time Optimization as implemented in
the kernel because use of GNU ld with LTO requires the LLVMgold plugin,
which is not technically supported for ld.bfd per
https://llvm.org/docs/GoldPlugin.html. Furthermore, if LLVMgold.so is
missing from a user's system, the build will fail, even though LTO as it
is implemented in the kernel requires ld.lld to avoid this dependency in
the first place.
Ultimately, the PowerPC vDSO should be converted to compiling and
linking with $(CC) and $(LD) respectively but there were issues last
time this was tried, potentially due to older but supported tool
versions. To avoid regressing GCC + binutils, use the compiler option
'-fuse-ld', which tells the compiler which linker to use when it is
invoked as both the compiler and linker. Use '-fuse-ld=lld' when
LD=ld.lld has been specified (CONFIG_LD_IS_LLD) so that the vDSO is
linked with the same linker as the rest of the kernel.
$ llvm-readelf -p .comment arch/powerpc/kernel/vdso/vdso{32,64}.so.dbg
File: arch/powerpc/kernel/vdso/vdso32.so.dbg
String dump of section '.comment':
[ 0] Linker: LLD 14.0.0
[ 14] clang version 14.0.0 (Fedora 14.0.0-1.fc37)
File: arch/powerpc/kernel/vdso/vdso64.so.dbg
String dump of section '.comment':
[ 0] Linker: LLD 14.0.0
[ 14] clang version 14.0.0 (Fedora 14.0.0-1.fc37)
LD can be a full path to ld.lld, which will not be handled properly by
'-fuse-ld=lld' if the full path to ld.lld is outside of the compiler's
search path. '-fuse-ld' can take a path to the linker but it is
deprecated in clang 12.0.0; '--ld-path' is preferred for this scenario.
Use '--ld-path' if it is supported, as it will handle a full path or
just 'ld.lld' properly. See the LLVM commit below for the full details
of '--ld-path'.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/774
Link: https://github.com/llvm/llvm-project/commit/1bc5c84710a8c73ef21295e63c19d10a8c71f2f5
Link: https://lore.kernel.org/r/20220511185001.3269404-3-nathan@kernel.org
|
|
When linking vdso{32,64}.so.dbg with ld.lld, there is a warning about
not finding _start for the starting address:
ld.lld: warning: cannot find entry symbol _start; not setting start address
ld.lld: warning: cannot find entry symbol _start; not setting start address
Looking at GCC + GNU ld, the entry point address is 0x0:
$ llvm-readelf -h vdso{32,64}.so.dbg &| rg "(File|Entry point address):"
File: vdso32.so.dbg
Entry point address: 0x0
File: vdso64.so.dbg
Entry point address: 0x0
This matches what ld.lld emits:
$ powerpc64le-linux-gnu-readelf -p .comment vdso{32,64}.so.dbg
File: vdso32.so.dbg
String dump of section '.comment':
[ 0] Linker: LLD 14.0.0
[ 14] clang version 14.0.0 (Fedora 14.0.0-1.fc37)
File: vdso64.so.dbg
String dump of section '.comment':
[ 0] Linker: LLD 14.0.0
[ 14] clang version 14.0.0 (Fedora 14.0.0-1.fc37)
$ llvm-readelf -h vdso{32,64}.so.dbg &| rg "(File|Entry point address):"
File: vdso32.so.dbg
Entry point address: 0x0
File: vdso64.so.dbg
Entry point address: 0x0
Remove ENTRY to remove the warning, as it is unnecessary for the vDSO to
function correctly.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220511185001.3269404-2-nathan@kernel.org
|
|
When the mmu_feature_keys[] was introduced in the commit c12e6f24d413
("powerpc: Add option to use jump label for mmu_has_feature()"),
it is unlikely that it would be used either directly or indirectly in
the out of tree modules. So we exported it as GPL only.
But with the evolution of the codes, especially the PPC_KUAP support, it
may be indirectly referenced by some primitive macro or inline functions
such as get_user() or __copy_from_user_inatomic(), this will make it
impossible to build many non GPL modules (such as ZFS) on ppc
architecture. Fix this by exposing the mmu_feature_keys[] to the non-GPL
modules too.
Fixes: 7613f5a66bec ("powerpc/64s/kuap: Use mmu_has_feature()")
Reported-by: Nathaniel Filardo <nwfilardo@gmail.com>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220329085709.4132729-1-haokexin@gmail.com
|
|
The panic notifiers infrastructure is a bit limited in the scope of
the callbacks - basically every kind of functionality is dropped
in a list that runs in the same point during the kernel panic path.
This is not really on par with the complexities and particularities
of architecture / hypervisors' needs, and a refactor is ongoing.
As part of this refactor, it was observed that powerpc has 2 notifiers,
with mixed goals: one is just a KASLR offset dumper, whereas the other
aims to hard-disable IRQs (necessary on panic path), warn firmware of
the panic event (fadump) and run low-level platform-specific machinery
that might stop kernel execution and never come back.
Clearly, the 2nd notifier has opposed goals: disable IRQs / fadump
should run earlier while low-level platform actions should
run late since it might not even return. Hence, this patch decouples
the notifiers splitting them in three:
- First one is responsible for hard-disable IRQs and fadump,
should run early;
- The kernel KASLR offset dumper is really an informative notifier,
harmless and may run at any moment in the panic path;
- The last notifier should run last, since it aims to perform
low-level actions for specific platforms, and might never return.
It is also only registered for 2 platforms, pseries and ps3.
The patch better documents the notifiers and clears the code too,
also removing a useless header.
Currently no functionality change should be observed, but after
the planned panic refactor we should expect more panic reliability
with this patch.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220427224924.592546-9-gpiccoli@igalia.com
|
|
Add support for the MediaTek Helio X10 (MT6795) SoC's GPIO/pinmux
controller.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220517083957.11816-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add devicetree and pinfunc bindings for MediaTek Helio X10 MT6795.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220517083957.11816-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Merge our KVM topic branch.
|
|
Add the pinctrl driver support for i.MXRT1170.
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20220517032802.451743-11-Mr.Bossman075@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add i.MXRT1170 pinctrl binding Documentation
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220517032802.451743-5-Mr.Bossman075@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
RK3588 can have 10 different device functions, so increase the maximum
amount appropriately. Considering rockchip uses auto-generated pinmux
files, adding a quite complex if construct to increase the limit just
for rk3588 does not seem to be worth the effort.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220504213251.264819-19-sebastian.reichel@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
'gpio-reserved-ranges' property is already used and supported by common pinctrl
bindings, so add it also here to fix warnings like:
qrb5165-rb5.dtb: gpio@c000: 'gpio-reserved-ranges' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220508135932.132378-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
'input-disable' is already used and supported by common pinctrl
bindings, so add it also here to fix warnings like:
arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb: gpio@c000: lt9611-rst-state: 'oneOf' conditional failed, one must be fixed:
'input-disable' does not match any of the regexes: 'pinctrl-[0-9]+'
'function', 'input-disable', 'output-high', 'pins', 'power-source' do not match any of the regexes: '(pinconf|-pins)$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220507194913.261121-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add missing 'gpio-line-names' property and describe its constraints for
all models except PM8226 (which seems not really used).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220507194913.261121-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Matching PMIC GPIOs config nodes within a '-state' node by '.*' pattern
does not work as expected because of linux,phandle in the DTB:
arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dtb: gpios@c000: divclk4-state: 'oneOf' conditional failed, one must be fixed:
'pins' is a required property
'function' is a required property
'pinconf' does not match any of the regexes: 'pinctrl-[0-9]+'
[[2]] is not of type 'object'
Make the schema stricter and expect such nodes to be either named
'pinconfig' or followed with '-pins' prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220507194913.261121-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add missing compatibles for devices: PM8150L and PMM8155AU.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220507194913.261121-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The function has only a single caller and two lines. Just remove it
since it is pointless and just harming readability.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220519105235.31397-4-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We store struct bfq_io_cq pointer in rq->elv.priv[0] in bfq_init_rq().
Thus a call to icq_to_bic() in RQ_BIC() is wrong. Luckily it does no
harm currently because struct io_iq is the first one in struct
bfq_io_cq.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220519105235.31397-3-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The code in bfq_check_waker() ignores wake up events from the current
waker. This makes it more likely we select a new tentative waker
although the current one is generating more wake up events. Treat
current waker the same way as any other process and allow it to reset
the waker detection logic.
Fixes: 71217df39dc6 ("block, bfq: make waker-queue detection more robust")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220519105235.31397-2-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently we look for waker only if current queue has no requests. This
makes sense for bfq queues with a single process however for shared
queues when there is a larger number of processes the condition that
queue has no requests is difficult to meet because often at least one
process has some request in flight although all the others are waiting
for the waker to do the work and this harms throughput. Relax the "no
queued request for bfq queue" condition to "the current task has no
queued requests yet". For this, we also need to start tracking number of
requests in flight for each task.
This patch (together with the following one) restores the performance
for dbench with 128 clients that regressed with commit c65e6fd460b4
("bfq: Do not let waker requests skip proper accounting") because
this commit makes requests of wakers properly enter BFQ queues and thus
these queues become ineligible for the old waker detection logic.
Dbench results:
Vanilla 5.18-rc3 5.18-rc3 + revert 5.18-rc3 patched
Mean 1237.36 ( 0.00%) 950.16 * 23.21%* 988.35 * 20.12%*
Numbers are time to complete workload so lower is better.
Fixes: c65e6fd460b4 ("bfq: Do not let waker requests skip proper accounting")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220519105235.31397-1-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The pm6125 has 9 GPIOs with no holes inbetween.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220511220613.1015472-4-marijn.suijten@somainline.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The pm6125 comes with 9 GPIOs, without holes.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220511220613.1015472-3-marijn.suijten@somainline.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When running as dom0less guest (HVM domain on ARM) the xenstore event
channel is available at domain creation but the shared xenstore
interface page only becomes available later on.
In that case, wait for a notification on the xenstore event channel,
then complete the xenstore initialization later, when the shared page
is actually available.
The xenstore page has few extra field. Add them to the shared struct.
One of the field is "connection", when the connection is ready, it is
zero. If the connection is not-zero, wait for a notification.
Signed-off-by: Luca Miccio <lucmiccio@gmail.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220513211938.719341-2-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Sync the xs_wire.h header file in Linux with the one in Xen.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220513211938.719341-1-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Since commit 4d65adfcd119 ("x86: xen: insn: Decode Xen and KVM
emulate-prefix signature"), objtool is able to correctly parse the
prefixed instruction in xen_cpuid and emit correct orc unwind
information. Hence, marking the function as STACKFRAME_NON_STANDARD is
no longer needed.
This commit is basically a revert of commit 983bb6d254c7 ("x86/xen: Mark
xen_cpuid() stack frame as non-standard").
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20220517162425.100567-1-mheyne@amazon.de
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
and feature_persistent
SeongJae is currently listed as a contact point for some blk{back,front}
features, but he will not work for XEN for a while. This commit
therefore updates the contact point to his colleague, Maximilian, who is
understanding the context and actively working with the features now.
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20220420072734.1692-1-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Commit 505a666ee3fc ("writeback: plug writeback in wb_writeback() and
writeback_inodes_wb()") has us holding a plug during wb_writeback, which
may cause a potential ABBA dead lock:
wb_writeback fat_file_fsync
blk_start_plug(&plug)
for (;;) {
iter i-1: some reqs have been added into plug->mq_list // LOCK A
iter i:
progress = __writeback_inodes_wb(wb, work)
. writeback_sb_inodes // fat's bdev
. __writeback_single_inode
. . generic_writepages
. . __block_write_full_page
. . . . __generic_file_fsync
. . . . sync_inode_metadata
. . . . writeback_single_inode
. . . . __writeback_single_inode
. . . . fat_write_inode
. . . . __fat_write_inode
. . . . sync_dirty_buffer // fat's bdev
. . . . lock_buffer(bh) // LOCK B
. . . . submit_bh
. . . . blk_mq_get_tag // LOCK A
. . . trylock_buffer(bh) // LOCK B
. . . redirty_page_for_writepage
. . . wbc->pages_skipped++
. . --wbc->nr_to_write
. wrote += write_chunk - wbc.nr_to_write // wrote > 0
. requeue_inode
. redirty_tail_locked
if (progress) // progress > 0
continue;
iter i+1:
queue_io
// similar process with iter i, infinite for-loop !
}
blk_finish_plug(&plug) // flush plug won't be called
Above process triggers a hungtask like:
[ 399.044861] INFO: task bb:2607 blocked for more than 30 seconds.
[ 399.046824] Not tainted 5.18.0-rc1-00005-gefae4d9eb6a2-dirty
[ 399.051539] task:bb state:D stack: 0 pid: 2607 ppid:
2426 flags:0x00004000
[ 399.051556] Call Trace:
[ 399.051570] __schedule+0x480/0x1050
[ 399.051592] schedule+0x92/0x1a0
[ 399.051602] io_schedule+0x22/0x50
[ 399.051613] blk_mq_get_tag+0x1d3/0x3c0
[ 399.051640] __blk_mq_alloc_requests+0x21d/0x3f0
[ 399.051657] blk_mq_submit_bio+0x68d/0xca0
[ 399.051674] __submit_bio+0x1b5/0x2d0
[ 399.051708] submit_bio_noacct+0x34e/0x720
[ 399.051718] submit_bio+0x3b/0x150
[ 399.051725] submit_bh_wbc+0x161/0x230
[ 399.051734] __sync_dirty_buffer+0xd1/0x420
[ 399.051744] sync_dirty_buffer+0x17/0x20
[ 399.051750] __fat_write_inode+0x289/0x310
[ 399.051766] fat_write_inode+0x2a/0xa0
[ 399.051783] __writeback_single_inode+0x53c/0x6f0
[ 399.051795] writeback_single_inode+0x145/0x200
[ 399.051803] sync_inode_metadata+0x45/0x70
[ 399.051856] __generic_file_fsync+0xa3/0x150
[ 399.051880] fat_file_fsync+0x1d/0x80
[ 399.051895] vfs_fsync_range+0x40/0xb0
[ 399.051929] __x64_sys_fsync+0x18/0x30
In my test, 'need_resched()' (which is imported by 590dca3a71 "fs-writeback:
unplug before cond_resched in writeback_sb_inodes") in function
'writeback_sb_inodes()' seldom comes true, unless cond_resched() is deleted
from write_cache_pages().
Fix it by correcting wrote number according number of skipped pages
in writeback_sb_inodes().
Goto Link to find a reproducer.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215837
Cc: stable@vger.kernel.org # v4.3
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220510133805.1988292-1-chengzhihao1@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no external user of xenbus_grant_ring() left, so merge it into
the only caller xenbus_setup_ring().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Simplify sndfront's ring creation and removal via xenbus_setup_ring()
and xenbus_teardown_ring().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 only
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Simplify xen-hcd's ring creation and removal via xenbus_setup_ring()
and xenbus_teardown_ring().
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Simplify scsifront's ring creation and removal via xenbus_setup_ring()
and xenbus_teardown_ring().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Simplify pcifront's shared page creation and removal via
xenbus_setup_ring() and xenbus_teardown_ring().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Simplify drmfront's ring creation and removal via xenbus_setup_ring()
and xenbus_teardown_ring().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 only
Signed-off-by: Juergen Gross <jgross@suse.com>
|
