summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-05-18iwlwifi: mvm: remove vif_countMiri Korenblit
We used to count the number of ieee80211_vifs in mvm. This was needed for the legacy PM API, which is no longer supported. Remove it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20220517120045.8c91ae023b15.Ia6145e4930b1d28f3fcedc316b4f177295b00557@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-18iwlwifi: mvm: always tell the firmware to accept MCAST frames in BSSEmmanuel Grumbach
Make the firmware's life easier and always accept MCAST frames. If needed, drop them in the driver. We need to filter out MCAST frames in order not to have false positives in the decryption check. If we accept MCAST frames before we have the GKT installed, we'll end up complaining that we can't decrypt the frame. Implement the same filtering, but in the driver. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20220517120045.479956a46317.I21fac7ede9eca85a662671d694872898df884f0b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-18iwlwifi: mvm: add OTP info in case of init failureMordechay Goodstein
This helps to understand HW issues that can happen while initializing the nic. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20220517120045.48464938b27a.I9b381f0da5e0636ad6a5f6c13f98edb9031b50fb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-18iwlwifi: mvm: fix assert 1F04 upon reconfigEmmanuel Grumbach
When we reconfig we must not send the MAC_POWER command that relates to a MAC that was not yet added to the firmware. Ignore those in the iterator. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20220517120044.ed2ffc8ce732.If786e19512d0da4334a6382ea6148703422c7d7b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-18iwlwifi: fw: init SAR GEO table only if data is presentJohannes Berg
When no table data was read from ACPI, then filling the data and returning success here will fill zero values, which means transmit power will be limited to 0 dBm. This is clearly not intended. Return an error from iwl_sar_geo_init() if there's no data to fill into the command structure. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: 78a19d5285d9 ("iwlwifi: mvm: Read the PPAG and SAR tables at INIT stage") Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20220517120044.bc45923b74e9.Id2b4362234b7f8ced82c591b95d4075dd2ec12f4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-18iwlwifi: mvm: clean up authorized conditionJohannes Berg
We track in mvmvif->authorized when the AP STA becomes authorized and no longer authorized, so we don't need the complex condition with station lookup. Simplify the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20220517120044.41f528383a6b.I1cdf165581b781c53c8e6ac8779a2282b1f67c59@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-18iwlwifi: mvm: use NULL instead of ERR_PTR when parsing wowlan statusHaim Dreyfuss
We anyway don't differentiate between the errors so it is pointless, returning NULL will be simpler in this case. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20220517120044.78a7651327bb.I77480de7c26db850680f96a3440fb6a1b45dd9d2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-18iwlwifi: pcie: simplify MSI-X cause mappingJohannes Berg
We're currently manually encoding a calculation here since the HW just maps all the bits of specific registers to specific offsets, which led to the bug fixed here previously with the Bz SW_ERROR interrupt. Clean up the code to only know about the mapping offset (-16 or 16 depending on the register) to avoid such issues in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20220517120044.19abe9a4d171.I934356911277f9b2a955808763f317986f69a461@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-18ARM: 9197/1: spectre-bhb: fix loop8 sequence for Thumb2Ard Biesheuvel
In Thumb2, 'b . + 4' produces a branch instruction that uses a narrow encoding, and so it does not jump to the following instruction as expected. So use W(b) instead. Fixes: 6c7cb60bff7a ("ARM: fix Thumb2 regression with Spectre BHB") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-05-18ARM: 9196/1: spectre-bhb: enable for Cortex-A15Ard Biesheuvel
The Spectre-BHB mitigations were inadvertently left disabled for Cortex-A15, due to the fact that cpu_v7_bugs_init() is not called in that case. So fix that. Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-05-18Merge tag 'mlx5-updates-2022-05-17' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2022-05-17 MISC updates to mlx5 dirver 1) Aya Levin allows relaxed ordering over VFs 2) Gal Pressman Adds support XDP SQs for uplink representors in switchdev mode 3) Add debugfs TC stats and command failure syndrome for debuggability 4) Tariq uses variants of vzalloc where it could help 5) Multiport eswitch support from Elic Cohen: Eli Cohen Says: =============== The multiport eswitch feature allows to forward traffic from a representor net device to the uplink port of an associated eswitch's uplink port. This feature requires creating a LAG object. Since LAG can be created only once for a function, the feature is mutual exclusive with either bonding or multipath. Multipath eswitch mode is entered automatically these conditions are met: 1. No other LAG related mode is active. 2. A rule that explicitly forwards to an uplink port is inserted. The implementation maintains a reference count on such rules. When the reference count reaches zero, the LAG is released and other modes may be used. When an explicit rule that explicitly forwards to an uplink port is inserted while another LAG mode is active, that rule will not be offloaded by the hardware since the hardware cannot guarantee that the rule will actually be forwarded to that port. Example rules that forwards to an uplink port is: $ tc filter add dev rep0 root flower action mirred egress \ redirect dev uplinkrep0 $ tc filter add dev rep0 root flower action mirred egress \ redirect dev uplinkrep1 This feature is supported only if LAG_RESOURCE_ALLOCATION firmware configuration parameter is set to true. The series consists of three patches: 1. Lag state machine refactor This patch does not add new functionality but rather changes the way the state of the LAG is maintained. 2. Small fix to remove unused argument. 3. The actual implementation of the feature. =============== ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-18Merge tag 'mlx5-fixes-2022-05-17' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2022-05-17 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-18net: af_key: check encryption module availability consistencyThomas Bartschies
Since the recent introduction supporting the SM3 and SM4 hash algos for IPsec, the kernel produces invalid pfkey acquire messages, when these encryption modules are disabled. This happens because the availability of the algos wasn't checked in all necessary functions. This patch adds these checks. Signed-off-by: Thomas Bartschies <thomas.bartschies@cvk.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-05-18net: af_key: add check for pfkey_broadcast in function pfkey_processJiasheng Jiang
If skb_clone() returns null pointer, pfkey_broadcast() will return error. Therefore, it should be better to check the return value of pfkey_broadcast() and return error if fails. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-05-18netfilter: ctnetlink: fix up for "netfilter: conntrack: remove unconfirmed list"Stephen Rothwell
After merging the net-next tree, today's linux-next build (powerpc ppc64_defconfig) produced this warning: nf_conntrack_netlink.c:1717 warning: 'ctnetlink_dump_one_entry' defined but not used Fixes: 8a75a2c17410 ("netfilter: conntrack: remove unconfirmed list") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Florian Westphal <fw@strlen.de>
2022-05-17net/mlx5: Support multiport eswitch modeEli Cohen
Multiport eswitch mode is a LAG mode that allows to add rules that forward traffic to a specific physical port without being affected by LAG affinity configuration. This mode of operation is mutual exclusive with the other LAG modes used by multipath and bonding. To make the transition between the modes, we maintain a counter on the number of rules specifying one of the uplink representors as the target of mirred egress redirect action. An example of such rule would be: $ tc filter add dev enp8s0f0_0 prot all root flower dst_mac \ 00:11:22:33:44:55 action mirred egress redirect dev enp8s0f0 If the reference count just grows to one and LAG is not in use, we create the LAG in multiport eswitch mode. Other mode changes are not allowed while in this mode. When the reference count reaches zero, we destroy the LAG and let other modes be used if needed. logic also changed such that if forwarding to some uplink destination cannot be guaranteed, we fail the operation so the rule will eventually be in software and not in hardware. Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5: Remove unused argumentEli Cohen
Argument ndev is not used in mlx5_handle_changeupper_event() Remove it. Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5: Lag, refactor lag state machineEli Cohen
LAG state machine is implemented using bit flags. However, all these bit flags, except for MLX5_LAG_FLAG_HASH_BASED, are really mutual exclusive. In addition, MLX5_LAG_FLAG_READY is used by bonding to mark if we have our netdevices successfully added to lag and does not really belong in the same flags variable as the other flags. Rename MLX5_LAG_FLAG_READY to MLX5_LAG_FLAG_NDEVS_READY to better reflect its purpose and put it in a new flags variable. For the rest of the flags, we introduce a mode enum to hold the state of the LAG. Remove the shared fdb boolean flag from struct mlx5_lag and store this configuration as a mode flag. Change all flag related operations to use standard Linux APIs. Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5e: Add XDP SQs to uplink representors steering tablesGal Pressman
This patch adds the XDP SQs to the uplink representors steering tables in swichdev mode and enables XDP usage on them. Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5e: Correct the calculation of max channels for repMoshe Tal
Correct the calculation of maximum channels of rep to better utilize the hardware resources and allow a larger scale of reps. This will allow creation of all virtual ports configured. Fixes: 473baf2e9e8c ("net/mlx5e: Allow profile-specific limitation on max num of channels") Signed-off-by: Moshe Tal <moshet@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5e: CT: Add ct driver countersSaeed Mahameed
Connection offload is translated to multiple rules over several hardware flow tables. Unhandled end-cases may cause a hardware resource leak causing multiple system symptoms such as a host memory leak, decreased performance and other scale related issues. Export the current number of firmware FTEs related to the CT table as a debugfs counter. Also add a dropped packets counter to help debug packets dropped on restore failure. To show the offloaded count: cat /sys/kernel/debug/mlx5/<PCI>/ct_nic/offloaded To show the dropped count: cat /sys/kernel/debug/mlx5/<PCI>/ct_nic/rx_dropped Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Roi Dayan <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com>
2022-05-17net/mlx5e: Allow relaxed ordering over VFsAya Levin
By PCI spec, the config space of the VF always report relaxed ordering not supported while it inherits this property from its PF. Hence using pcie_relaxed_ordering_enable(), always disables the relaxed ordering on all VFs. Remove this check and rely on the firmware which queries the config space of the PF and set the capability bit accordingly. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Marina Varshaver <marinav@nvidia.com> Reviewed-by: Gal Shalom <galshalom@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5e: Support partial GSO for tunnels over vlansGal Pressman
Offloading outer checksum on tunnels requires GSO partial, add it to 'vlan_features' to allow offloading tunnels over vlans. For example, running GENEVE over vlan & ipv6 (mandatory UDP checksum) now allows for hardware TSO instead of software segmentation in GSO only. Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5e: IPoIB, Improve ethtool rxnfc callback structure in IPoIBGal Pressman
Followup commit 79ce39be1d63 ("net/mlx5e: Improve ethtool rxnfc callback structure") and handle CONFIG_MLX5_EN_RXNFC enabled/disabled inside the fs layer so the ethtool callbacks are always available. The fs layer will provide stubs when CONFIG_MLX5_EN_RXNFC is compiled out. Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5e: Allocate virtually contiguous memory for reps structuresTariq Toukan
Physical continuity is not necessary, and requested allocation size might be larger than PAGE_SIZE. Hence, use v-alloc/free API. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5e: Allocate virtually contiguous memory for VLANs listTariq Toukan
Physical continuity is not necessary, and requested allocation size might be larger than PAGE_SIZE. Hence, use v-alloc/free API. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5: Allocate virtually contiguous memory in pci_irq.cTariq Toukan
Physical continuity is not necessary, and requested allocation size might be larger than PAGE_SIZE. Hence, use v-alloc/free API. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5: Allocate virtually contiguous memory in vport.cTariq Toukan
Physical continuity is not necessary, and requested allocation size might be larger than PAGE_SIZE. Hence, use v-alloc/free API. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5: Inline db alloc API functionTariq Toukan
Take the wrapper version which picks default node into a header file. This reduces the number of exported functions. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5: Add last command failure syndrome to debugfsMoshe Shemesh
Add syndrome of last command failure per command type to debugfs to ease debugging of such failure. last_failed_syndrome - last command failed syndrome returned by FW. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5: sparse: error: context imbalance in 'mlx5_vf_get_core_dev'Saeed Mahameed
Removing the annotation resolves the issue for some reason. Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-18percpu_ref_init(): clean ->percpu_count_ref on failureAl Viro
That way percpu_ref_exit() is safe after failing percpu_ref_init(). At least one user (cgroup_create()) had a double-free that way; there might be other similar bugs. Easier to fix in percpu_ref_init(), rather than playing whack-a-mole in sloppy users... Usual symptoms look like a messed refcounting in one of subsystems that use percpu allocations (might be percpu-refcount, might be something else). Having refcounts for two different objects share memory is Not Nice(tm)... Reported-by: syzbot+5b1e53987f858500ec00@syzkaller.appspotmail.com Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-05-17net/mlx5: Drain fw_reset when removing deviceShay Drory
In case fw sync reset is called in parallel to device removal, device might stuck in the following deadlock: CPU 0 CPU 1 ----- ----- remove_one uninit_one (locks intf_state_mutex) mlx5_sync_reset_now_event() work in fw_reset->wq. mlx5_enter_error_state() mutex_lock (intf_state_mutex) cleanup_once fw_reset_cleanup() destroy_workqueue(fw_reset->wq) Drain the fw_reset WQ, and make sure no new work is being queued, before entering uninit_one(). The Drain is done before devlink_unregister() since fw_reset, in some flows, is using devlink API devlink_remote_reload_actions_performed(). Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5e: CT: Fix setting flow_source for smfs ct tuplesPaul Blakey
Cited patch sets flow_source to ANY overriding the provided spec flow_source, avoiding the optimization done by commit c9c079b4deaa ("net/mlx5: CT: Set flow source hint from provided tuple device"). To fix the above, set the dr_rule flow_source from provided flow spec. Fixes: 3ee61ebb0df1 ("net/mlx5: CT: Add software steering ct flow steering provider") Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5e: CT: Fix support for GRE tuplesPaul Blakey
cited commit removed support for GRE tuples when software steering was enabled. To bring back support for GRE tuples, add GRE ipv4/ipv6 matchers. Fixes: 3ee61ebb0df1 ("net/mlx5: CT: Add software steering ct flow steering provider") Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5e: Remove HW-GRO from reported featuresGal Pressman
We got reports of certain HW-GRO flows causing kernel call traces, which might be related to firmware. To be on the safe side, disable the feature for now and re-enable it once a driver/firmware fix is found. Fixes: 83439f3c37aa ("net/mlx5e: Add HW-GRO offload") Signed-off-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5e: Properly block HW GRO when XDP is enabledMaxim Mikityanskiy
HW GRO is incompatible and mutually exclusive with XDP and XSK. However, the needed checks are only made when enabling XDP. If HW GRO is enabled when XDP is already active, the command will succeed, and XDP will be skipped in the data path, although still enabled. This commit fixes the bug by checking the XDP and XSK status in mlx5e_fix_features and disabling HW GRO if XDP is enabled. Fixes: 83439f3c37aa ("net/mlx5e: Add HW-GRO offload") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5e: Properly block LRO when XDP is enabledMaxim Mikityanskiy
LRO is incompatible and mutually exclusive with XDP. However, the needed checks are only made when enabling XDP. If LRO is enabled when XDP is already active, the command will succeed, and XDP will be skipped in the data path, although still enabled. This commit fixes the bug by checking the XDP status in mlx5e_fix_features and disabling LRO if XDP is enabled. Fixes: 86994156c736 ("net/mlx5e: XDP fast RX drop bpf programs support") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5e: Block rx-gro-hw feature in switchdev modeAya Levin
When the driver is in switchdev mode and rx-gro-hw is set, the RQ needs special CQE handling. Till then, block setting of rx-gro-hw feature in switchdev mode, to avoid failure while setting the feature due to failure while opening the RQ. Fixes: f97d5c2a453e ("net/mlx5e: Add handle SHAMPO cqe support") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5e: Wrap mlx5e_trap_napi_poll into rcu_read_lockMaxim Mikityanskiy
The body of mlx5e_napi_poll is wrapped into rcu_read_lock to be able to read the XDP program pointer using rcu_dereference. However, the trap RQ NAPI doesn't use rcu_read_lock, because the trap RQ works only in the non-linear mode, and mlx5e_skb_from_cqe_nonlinear, until recently, didn't support XDP and didn't call rcu_dereference. Starting from the cited commit, mlx5e_skb_from_cqe_nonlinear supports XDP and calls rcu_dereference, but mlx5e_trap_napi_poll doesn't wrap it into rcu_read_lock. It leads to RCU-lockdep warnings like this: WARNING: suspicious RCU usage This commit fixes the issue by adding an rcu_read_lock to mlx5e_trap_napi_poll, similarly to mlx5e_napi_poll. Fixes: ea5d49bdae8b ("net/mlx5e: Add XDP multi buffer support to the non-linear legacy RQ") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5: DR, Ignore modify TTL on RX if device doesn't support itYevgeny Kliteynik
When modifying TTL, packet's csum has to be recalculated. Due to HW issue in ConnectX-5, csum recalculation for modify TTL on RX is supported through a work-around that is specifically enabled by configuration. If the work-around isn't enabled, rather than adding an unsupported action the modify TTL action on RX should be ignored. Ignoring modify TTL action might result in zero actions, so in such cases we will not convert the match STE to modify STE, as it is done by FW in DMFS. This patch fixes an issue where modify TTL action was ignored both on RX and TX instead of only on RX. Fixes: 4ff725e1d4ad ("net/mlx5: DR, Ignore modify TTL if device doesn't support it") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5: Initialize flow steering during driver probeShay Drory
Currently, software objects of flow steering are created and destroyed during reload flow. In case a device is unloaded, the following error is printed during grace period: mlx5_core 0000:00:0b.0: mlx5_fw_fatal_reporter_err_work:690:(pid 95): Driver is in error state. Unloading As a solution to fix use-after-free bugs, where we try to access these objects, when reading the value of flow_steering_mode devlink param[1], let's split flow steering creation and destruction into two routines: * init and cleanup: memory, cache, and pools allocation/free. * create and destroy: namespaces initialization and cleanup. While at it, re-order the cleanup function to mirror the init function. [1] Kasan trace: [ 385.119849 ] BUG: KASAN: use-after-free in mlx5_devlink_fs_mode_get+0x3b/0xa0 [ 385.119849 ] Read of size 4 at addr ffff888104b79308 by task bash/291 [ 385.119849 ] [ 385.119849 ] CPU: 1 PID: 291 Comm: bash Not tainted 5.17.0-rc1+ #2 [ 385.119849 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 [ 385.119849 ] Call Trace: [ 385.119849 ] <TASK> [ 385.119849 ] dump_stack_lvl+0x6e/0x91 [ 385.119849 ] print_address_description.constprop.0+0x1f/0x160 [ 385.119849 ] ? mlx5_devlink_fs_mode_get+0x3b/0xa0 [ 385.119849 ] ? mlx5_devlink_fs_mode_get+0x3b/0xa0 [ 385.119849 ] kasan_report.cold+0x83/0xdf [ 385.119849 ] ? devlink_param_notify+0x20/0x190 [ 385.119849 ] ? mlx5_devlink_fs_mode_get+0x3b/0xa0 [ 385.119849 ] mlx5_devlink_fs_mode_get+0x3b/0xa0 [ 385.119849 ] devlink_nl_param_fill+0x18a/0xa50 [ 385.119849 ] ? _raw_spin_lock_irqsave+0x8d/0xe0 [ 385.119849 ] ? devlink_flash_update_timeout_notify+0xf0/0xf0 [ 385.119849 ] ? __wake_up_common+0x4b/0x1e0 [ 385.119849 ] ? preempt_count_sub+0x14/0xc0 [ 385.119849 ] ? _raw_spin_unlock_irqrestore+0x28/0x40 [ 385.119849 ] ? __wake_up_common_lock+0xe3/0x140 [ 385.119849 ] ? __wake_up_common+0x1e0/0x1e0 [ 385.119849 ] ? __sanitizer_cov_trace_const_cmp8+0x27/0x80 [ 385.119849 ] ? __rcu_read_unlock+0x48/0x70 [ 385.119849 ] ? kasan_unpoison+0x23/0x50 [ 385.119849 ] ? __kasan_slab_alloc+0x2c/0x80 [ 385.119849 ] ? memset+0x20/0x40 [ 385.119849 ] ? __sanitizer_cov_trace_const_cmp4+0x25/0x80 [ 385.119849 ] devlink_param_notify+0xce/0x190 [ 385.119849 ] devlink_unregister+0x92/0x2b0 [ 385.119849 ] remove_one+0x41/0x140 [ 385.119849 ] pci_device_remove+0x68/0x140 [ 385.119849 ] ? pcibios_free_irq+0x10/0x10 [ 385.119849 ] __device_release_driver+0x294/0x3f0 [ 385.119849 ] device_driver_detach+0x82/0x130 [ 385.119849 ] unbind_store+0x193/0x1b0 [ 385.119849 ] ? subsys_interface_unregister+0x270/0x270 [ 385.119849 ] drv_attr_store+0x4e/0x70 [ 385.119849 ] ? drv_attr_show+0x60/0x60 [ 385.119849 ] sysfs_kf_write+0xa7/0xc0 [ 385.119849 ] kernfs_fop_write_iter+0x23a/0x2f0 [ 385.119849 ] ? sysfs_kf_bin_read+0x160/0x160 [ 385.119849 ] new_sync_write+0x311/0x430 [ 385.119849 ] ? new_sync_read+0x480/0x480 [ 385.119849 ] ? _raw_spin_lock+0x87/0xe0 [ 385.119849 ] ? __sanitizer_cov_trace_cmp4+0x25/0x80 [ 385.119849 ] ? security_file_permission+0x94/0xa0 [ 385.119849 ] vfs_write+0x4c7/0x590 [ 385.119849 ] ksys_write+0xf6/0x1e0 [ 385.119849 ] ? __x64_sys_read+0x50/0x50 [ 385.119849 ] ? fpregs_assert_state_consistent+0x99/0xa0 [ 385.119849 ] do_syscall_64+0x3d/0x90 [ 385.119849 ] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 385.119849 ] RIP: 0033:0x7fc36ef38504 [ 385.119849 ] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 48 8d 05 f9 61 0d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53 [ 385.119849 ] RSP: 002b:00007ffde0ff3d08 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 385.119849 ] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007fc36ef38504 [ 385.119849 ] RDX: 000000000000000c RSI: 00007fc370521040 RDI: 0000000000000001 [ 385.119849 ] RBP: 00007fc370521040 R08: 00007fc36f00b8c0 R09: 00007fc36ee4b740 [ 385.119849 ] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc36f00a760 [ 385.119849 ] R13: 000000000000000c R14: 00007fc36f005760 R15: 000000000000000c [ 385.119849 ] </TASK> [ 385.119849 ] [ 385.119849 ] Allocated by task 65: [ 385.119849 ] kasan_save_stack+0x1e/0x40 [ 385.119849 ] __kasan_kmalloc+0x81/0xa0 [ 385.119849 ] mlx5_init_fs+0x11b/0x1160 [ 385.119849 ] mlx5_load+0x13c/0x220 [ 385.119849 ] mlx5_load_one+0xda/0x160 [ 385.119849 ] mlx5_recover_device+0xb8/0x100 [ 385.119849 ] mlx5_health_try_recover+0x2f9/0x3a1 [ 385.119849 ] devlink_health_reporter_recover+0x75/0x100 [ 385.119849 ] devlink_health_report+0x26c/0x4b0 [ 385.275909 ] mlx5_fw_fatal_reporter_err_work+0x11e/0x1b0 [ 385.275909 ] process_one_work+0x520/0x970 [ 385.275909 ] worker_thread+0x378/0x950 [ 385.275909 ] kthread+0x1bb/0x200 [ 385.275909 ] ret_from_fork+0x1f/0x30 [ 385.275909 ] [ 385.275909 ] Freed by task 65: [ 385.275909 ] kasan_save_stack+0x1e/0x40 [ 385.275909 ] kasan_set_track+0x21/0x30 [ 385.275909 ] kasan_set_free_info+0x20/0x30 [ 385.275909 ] __kasan_slab_free+0xfc/0x140 [ 385.275909 ] kfree+0xa5/0x3b0 [ 385.275909 ] mlx5_unload+0x2e/0xb0 [ 385.275909 ] mlx5_unload_one+0x86/0xb0 [ 385.275909 ] mlx5_fw_fatal_reporter_err_work.cold+0xca/0xcf [ 385.275909 ] process_one_work+0x520/0x970 [ 385.275909 ] worker_thread+0x378/0x950 [ 385.275909 ] kthread+0x1bb/0x200 [ 385.275909 ] ret_from_fork+0x1f/0x30 [ 385.275909 ] [ 385.275909 ] The buggy address belongs to the object at ffff888104b79300 [ 385.275909 ] which belongs to the cache kmalloc-128 of size 128 [ 385.275909 ] The buggy address is located 8 bytes inside of [ 385.275909 ] 128-byte region [ffff888104b79300, ffff888104b79380) [ 385.275909 ] The buggy address belongs to the page: [ 385.275909 ] page:00000000de44dd39 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x104b78 [ 385.275909 ] head:00000000de44dd39 order:1 compound_mapcount:0 [ 385.275909 ] flags: 0x8000000000010200(slab|head|zone=2) [ 385.275909 ] raw: 8000000000010200 0000000000000000 dead000000000122 ffff8881000428c0 [ 385.275909 ] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 [ 385.275909 ] page dumped because: kasan: bad access detected [ 385.275909 ] [ 385.275909 ] Memory state around the buggy address: [ 385.275909 ] ffff888104b79200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc [ 385.275909 ] ffff888104b79280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 385.275909 ] >ffff888104b79300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 385.275909 ] ^ [ 385.275909 ] ffff888104b79380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 385.275909 ] ffff888104b79400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 385.275909 ]] Fixes: e890acd5ff18 ("net/mlx5: Add devlink flow_steering_mode parameter") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5: DR, Fix missing flow_source when creating multi-destination FW tableMaor Dickman
In order to support multiple destination FTEs with SW steering FW table is created with single FTE with multiple actions and SW steering rule forward to it. When creating this table, flow source isn't set according to the original FTE. Fix this by passing the original FTE flow source to the created FW table. Fixes: 34583beea4b7 ("net/mlx5: DR, Create multi-destination table for SW-steering use") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-18ALSA: usb-audio: Fix wrong kfree issue in snd_usb_endpoint_free_allWan Jiabing
Fix following coccicheck error: ./sound/usb/endpoint.c:1671:8-10: ERROR: reference preceded by free on line 1671. Here should be 'cp' rather than 'ip'. Fixes: c11117b634f4 ("ALSA: usb-audio: Refcount multiple accesses on the single clock") Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20220518021617.10114-1-wanjiabing@vivo.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-05-17dt-bindings: mailbox: zynqmp_ipi: convert to yamlShubhrajyoti Datta
Convert the ipi doc to yaml. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220517165536.8637-1-shubhrajyoti.datta@xilinx.com
2022-05-17scsi: target: Fix incorrect use of cpumask_tMingzhe Zou
In commit d72d827f2f26, I used 'cpumask_t' incorrectly: void iscsit_thread_get_cpumask(struct iscsi_conn *conn) { int ord, cpu; cpumask_t conn_allowed_cpumask; ...... } static ssize_t lio_target_wwn_cpus_allowed_list_store( struct config_item *item, const char *page, size_t count) { int ret; char *orig; cpumask_t new_allowed_cpumask; ...... } The correct pattern should be as follows: cpumask_var_t mask; if (!zalloc_cpumask_var(&mask, GFP_KERNEL)) return -ENOMEM; ... use 'mask' here ... free_cpumask_var(mask); Link: https://lore.kernel.org/r/20220516054721.1548-1-mingzhe.zou@easystack.cn Fixes: d72d827f2f26 ("scsi: target: Add iscsi/cpus_allowed_list in configfs") Reported-by: Test Bot <zgrieee@gmail.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-17blk-throttle: Set BIO_THROTTLED when bio has been throttledLaibin Qiu
1.In current process, all bio will set the BIO_THROTTLED flag after __blk_throtl_bio(). 2.If bio needs to be throttled, it will start the timer and stop submit bio directly. Bio will submit in blk_throtl_dispatch_work_fn() when the timer expires.But in the current process, if bio is throttled. The BIO_THROTTLED will be set to bio after timer start. If the bio has been completed, it may cause use-after-free blow. BUG: KASAN: use-after-free in blk_throtl_bio+0x12f0/0x2c70 Read of size 2 at addr ffff88801b8902d4 by task fio/26380 dump_stack+0x9b/0xce print_address_description.constprop.6+0x3e/0x60 kasan_report.cold.9+0x22/0x3a blk_throtl_bio+0x12f0/0x2c70 submit_bio_checks+0x701/0x1550 submit_bio_noacct+0x83/0xc80 submit_bio+0xa7/0x330 mpage_readahead+0x380/0x500 read_pages+0x1c1/0xbf0 page_cache_ra_unbounded+0x471/0x6f0 do_page_cache_ra+0xda/0x110 ondemand_readahead+0x442/0xae0 page_cache_async_ra+0x210/0x300 generic_file_buffered_read+0x4d9/0x2130 generic_file_read_iter+0x315/0x490 blkdev_read_iter+0x113/0x1b0 aio_read+0x2ad/0x450 io_submit_one+0xc8e/0x1d60 __se_sys_io_submit+0x125/0x350 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Allocated by task 26380: kasan_save_stack+0x19/0x40 __kasan_kmalloc.constprop.2+0xc1/0xd0 kmem_cache_alloc+0x146/0x440 mempool_alloc+0x125/0x2f0 bio_alloc_bioset+0x353/0x590 mpage_alloc+0x3b/0x240 do_mpage_readpage+0xddf/0x1ef0 mpage_readahead+0x264/0x500 read_pages+0x1c1/0xbf0 page_cache_ra_unbounded+0x471/0x6f0 do_page_cache_ra+0xda/0x110 ondemand_readahead+0x442/0xae0 page_cache_async_ra+0x210/0x300 generic_file_buffered_read+0x4d9/0x2130 generic_file_read_iter+0x315/0x490 blkdev_read_iter+0x113/0x1b0 aio_read+0x2ad/0x450 io_submit_one+0xc8e/0x1d60 __se_sys_io_submit+0x125/0x350 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 0: kasan_save_stack+0x19/0x40 kasan_set_track+0x1c/0x30 kasan_set_free_info+0x1b/0x30 __kasan_slab_free+0x111/0x160 kmem_cache_free+0x94/0x460 mempool_free+0xd6/0x320 bio_free+0xe0/0x130 bio_put+0xab/0xe0 bio_endio+0x3a6/0x5d0 blk_update_request+0x590/0x1370 scsi_end_request+0x7d/0x400 scsi_io_completion+0x1aa/0xe50 scsi_softirq_done+0x11b/0x240 blk_mq_complete_request+0xd4/0x120 scsi_mq_done+0xf0/0x200 virtscsi_vq_done+0xbc/0x150 vring_interrupt+0x179/0x390 __handle_irq_event_percpu+0xf7/0x490 handle_irq_event_percpu+0x7b/0x160 handle_irq_event+0xcc/0x170 handle_edge_irq+0x215/0xb20 common_interrupt+0x60/0x120 asm_common_interrupt+0x1e/0x40 Fix this by move BIO_THROTTLED set into the queue_lock. Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220301123919.2381579-1-qiulaibin@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-17octeontx2-pf: Add support for adaptive interrupt coalescingSuman Ghosh
Added support for adaptive IRQ coalescing. It uses net_dim algorithm to find the suitable delay/IRQ count based on the current packet rate. Signed-off-by: Suman Ghosh <sumang@marvell.com> Link: https://lore.kernel.org/r/20220517044055.876158-1-sumang@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-17dn_route: set rt neigh to blackhole_netdev instead of loopback_dev in ifdownXin Long
Like other places in ipv4/6 dst ifdown, change to use blackhole_netdev instead of pernet loopback_dev in dn dst ifdown. Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/0cdf10e5a4af509024f08644919121fb71645bc2.1652751029.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-17NFC: nci: fix sleep in atomic context bugs caused by nci_skb_allocDuoming Zhou
There are sleep in atomic context bugs when the request to secure element of st-nci is timeout. The root cause is that nci_skb_alloc with GFP_KERNEL parameter is called in st_nci_se_wt_timeout which is a timer handler. The call paths that could trigger bugs are shown below: (interrupt context 1) st_nci_se_wt_timeout nci_hci_send_event nci_hci_send_data nci_skb_alloc(..., GFP_KERNEL) //may sleep (interrupt context 2) st_nci_se_wt_timeout nci_hci_send_event nci_hci_send_data nci_send_data nci_queue_tx_data_frags nci_skb_alloc(..., GFP_KERNEL) //may sleep This patch changes allocation mode of nci_skb_alloc from GFP_KERNEL to GFP_ATOMIC in order to prevent atomic context sleeping. The GFP_ATOMIC flag makes memory allocation operation could be used in atomic context. Fixes: ed06aeefdac3 ("nfc: st-nci: Rename st21nfcb to st-nci") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220517012530.75714-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-19 15:14:17 +0000