summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-05-17ASoC: Intel: avs: Prepare for firmware tracingCezary Rojewski
Firmware provides its own debug functionality. While coredump is one of these, traces are the main area of interest. kfifo is enlisted to cache log data that is being pumped to driver through SRAM. Separate DSP operations are declared as actual feature implementation differs between firmware generations. As log gathering involves usage of IPCs, add all necessary: ENABLE_LOGS and SYSTEM_TIME. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220516101116.190192-8-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-17ASoC: Intel: avs: Coredump and recovery flowCezary Rojewski
In rare occasions, under stress conditions or hardware malfunction, DSP firmware may fail. Software is notified about such situation with EXCEPTION_CAUGHT notification. IPC timeout is also counted as critical device failure. More often than not, driver can recover from such situations by performing full reset: killing and restarting ADSP. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220516101116.190192-7-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-17ASoC: Intel: avs: HDA PCM BE operationsCezary Rojewski
HDA streaming in DSP world means enlisting HDAudio links as BE interfaces. Another difference when compared to its DMIC and I2S friends is lack of NHLT blob usage - no additional hardware configuration is needed. Similarly to I2S component, HDA populates its DAIs dynamically, here by the means of codec->pcm_list_head. Allows for cutting the number of soc components required to support the interface. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220516101116.190192-6-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-17ASoC: Intel: avs: non-HDA PCM BE operationsCezary Rojewski
DMIC and I2S interfaces differ in DMA operations from the HDAudio interface. With that in mind, implement all DAI operations to handle non-HDA BE interfaces. To prevent code duplication in newly added code, I2S platform registering is dynamic - makes use of specified port_mask and TDMs array to populate as many DAIs as required. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220516101116.190192-5-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-17ASoC: Intel: avs: Generic PCM FE operationsCezary Rojewski
Each stream in AVS is represented by FE and BE domain. FE path stands for HOST part of the stream while BE stands for LINK (hardware) one. While BE portion is interface specific, FE is not. Handle all standard DAI operations to implement FE part of the stream. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220516101116.190192-4-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-17ASoC: Intel: avs: Generic soc component driverCezary Rojewski
Prepare for concrete PCM operations over HDA, DMIC and I2S interfaces by providing generic soc component implementation. Interface-specific components re-use this code as majority of flow is shared. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220516101116.190192-3-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-17ASoC: Intel: avs: Account for libraries when booting basefwCezary Rojewski
Not all modules are part of base firmware. Some are part of loadable libraries. These need to be loaded after base firmware reports ready status through FW_READY notification. Their loading process is similar to the base firmware's one. Request the binary file, verify and strip the manifest and load the actual code into DSP memory with help of CLDMA or HD-Audio render stream, depending on audio device generation. List of libraries needed for loading is obtained through the topology - vendor sections specifying the name of firmware files to request. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220516101116.190192-2-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-17x86/sev: Remove duplicated assignment to variable infoColin Ian King
Variable info is being assigned the same value twice, remove the redundant assignment. Also assign variable v in the declaration. Cleans up clang scan warning: warning: Value stored to 'info' during its initialization is never read [deadcode.DeadStores] No code changed: # arch/x86/kernel/sev.o: text data bss dec hex filename 19878 4487 4112 28477 6f3d sev.o.before 19878 4487 4112 28477 6f3d sev.o.after md5: bfbaa515af818615fd01fea91e7eba1b sev.o.before.asm bfbaa515af818615fd01fea91e7eba1b sev.o.after.asm [ bp: Running the before/after check on sev.c because sev-shared.c gets included into it. ] Fixes: 597cfe48212a ("x86/boot/compressed/64: Setup a GHCB-based VC Exception handler") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220516184215.51841-1-colin.i.king@gmail.com
2022-05-17cfg80211: fix kernel-doc for cfg80211_beacon_dataJohannes Berg
The kernel-doc comment is formatted badly, resulting in a warning: include/net/cfg80211.h:1188: warning: bad line: [...] Fix that. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-17xtensa: improve call0 ABI probingMax Filippov
When call0 userspace ABI support by probing is enabled instructions that cause illegal instruction exception when PS.WOE is clear are retried with PS.WOE set before calling c-level exception handler. Record user pc at which PS.WOE was set in the fast exception handler and clear PS.WOE in the c-level exception handler if we get there from the same address. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2022-05-17xtensa: support artificial division by 0 exceptionMax Filippov
On xtensa cores wihout hardware division option division support functions from libgcc react to division by 0 attempt by executing illegal instruction followed by the characters 'DIV0'. Recognize this pattern in illegal instruction exception handler and convert it to division by 0. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2022-05-17ax25: merge repeat codes in ax25_dev_device_down()Lu Wei
Merge repeat codes to reduce the duplication. Signed-off-by: Lu Wei <luwei32@huawei.com> Link: https://lore.kernel.org/r/20220516062804.254742-1-luwei32@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-17net: vmxnet3: fix possible NULL pointer dereference in vmxnet3_rq_cleanup()Zixuan Fu
In vmxnet3_rq_create(), when dma_alloc_coherent() fails, vmxnet3_rq_destroy() is called. It sets rq->rx_ring[i].base to NULL. Then vmxnet3_rq_create() returns an error to its callers mxnet3_rq_create_all() -> vmxnet3_change_mtu(). Then vmxnet3_change_mtu() calls vmxnet3_force_close() -> dev_close() in error handling code. And the driver calls vmxnet3_close() -> vmxnet3_quiesce_dev() -> vmxnet3_rq_cleanup_all() -> vmxnet3_rq_cleanup(). In vmxnet3_rq_cleanup(), rq->rx_ring[ring_idx].base is accessed, but this variable is NULL, causing a NULL pointer dereference. To fix this possible bug, an if statement is added to check whether rq->rx_ring[0].base is NULL in vmxnet3_rq_cleanup() and exit early if so. The error log in our fault-injection testing is shown as follows: [ 65.220135] BUG: kernel NULL pointer dereference, address: 0000000000000008 ... [ 65.222633] RIP: 0010:vmxnet3_rq_cleanup_all+0x396/0x4e0 [vmxnet3] ... [ 65.227977] Call Trace: ... [ 65.228262] vmxnet3_quiesce_dev+0x80f/0x8a0 [vmxnet3] [ 65.228580] vmxnet3_close+0x2c4/0x3f0 [vmxnet3] [ 65.228866] __dev_close_many+0x288/0x350 [ 65.229607] dev_close_many+0xa4/0x480 [ 65.231124] dev_close+0x138/0x230 [ 65.231933] vmxnet3_force_close+0x1f0/0x240 [vmxnet3] [ 65.232248] vmxnet3_change_mtu+0x75d/0x920 [vmxnet3] ... Fixes: d1a890fa37f27 ("net: VMware virtual Ethernet NIC driver: vmxnet3") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Zixuan Fu <r33s3n6@gmail.com> Link: https://lore.kernel.org/r/20220514050711.2636709-1-r33s3n6@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-17net: vmxnet3: fix possible use-after-free bugs in vmxnet3_rq_alloc_rx_buf()Zixuan Fu
In vmxnet3_rq_alloc_rx_buf(), when dma_map_single() fails, rbi->skb is freed immediately. Similarly, in another branch, when dma_map_page() fails, rbi->page is also freed. In the two cases, vmxnet3_rq_alloc_rx_buf() returns an error to its callers vmxnet3_rq_init() -> vmxnet3_rq_init_all() -> vmxnet3_activate_dev(). Then vmxnet3_activate_dev() calls vmxnet3_rq_cleanup_all() in error handling code, and rbi->skb or rbi->page are freed again in vmxnet3_rq_cleanup_all(), causing use-after-free bugs. To fix these possible bugs, rbi->skb and rbi->page should be cleared after they are freed. The error log in our fault-injection testing is shown as follows: [ 14.319016] BUG: KASAN: use-after-free in consume_skb+0x2f/0x150 ... [ 14.321586] Call Trace: ... [ 14.325357] consume_skb+0x2f/0x150 [ 14.325671] vmxnet3_rq_cleanup_all+0x33a/0x4e0 [vmxnet3] [ 14.326150] vmxnet3_activate_dev+0xb9d/0x2ca0 [vmxnet3] [ 14.326616] vmxnet3_open+0x387/0x470 [vmxnet3] ... [ 14.361675] Allocated by task 351: ... [ 14.362688] __netdev_alloc_skb+0x1b3/0x6f0 [ 14.362960] vmxnet3_rq_alloc_rx_buf+0x1b0/0x8d0 [vmxnet3] [ 14.363317] vmxnet3_activate_dev+0x3e3/0x2ca0 [vmxnet3] [ 14.363661] vmxnet3_open+0x387/0x470 [vmxnet3] ... [ 14.367309] [ 14.367412] Freed by task 351: ... [ 14.368932] __dev_kfree_skb_any+0xd2/0xe0 [ 14.369193] vmxnet3_rq_alloc_rx_buf+0x71e/0x8d0 [vmxnet3] [ 14.369544] vmxnet3_activate_dev+0x3e3/0x2ca0 [vmxnet3] [ 14.369883] vmxnet3_open+0x387/0x470 [vmxnet3] [ 14.370174] __dev_open+0x28a/0x420 [ 14.370399] __dev_change_flags+0x192/0x590 [ 14.370667] dev_change_flags+0x7a/0x180 [ 14.370919] do_setlink+0xb28/0x3570 [ 14.371150] rtnl_newlink+0x1160/0x1740 [ 14.371399] rtnetlink_rcv_msg+0x5bf/0xa50 [ 14.371661] netlink_rcv_skb+0x1cd/0x3e0 [ 14.371913] netlink_unicast+0x5dc/0x840 [ 14.372169] netlink_sendmsg+0x856/0xc40 [ 14.372420] ____sys_sendmsg+0x8a7/0x8d0 [ 14.372673] __sys_sendmsg+0x1c2/0x270 [ 14.372914] do_syscall_64+0x41/0x90 [ 14.373145] entry_SYSCALL_64_after_hwframe+0x44/0xae ... Fixes: 5738a09d58d5a ("vmxnet3: fix checks for dma mapping errors") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Zixuan Fu <r33s3n6@gmail.com> Link: https://lore.kernel.org/r/20220514050656.2636588-1-r33s3n6@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-17Merge branch irq/gic-v3-nmi-fixes-5.19 into irq/irqchip-nextMarc Zyngier
* irq/gic-v3-nmi-fixes-5.19: : . : GICv3 pseudo-NMI fixes from Mark Rutland: : : "These patches fix a couple of issues with the way GICv3 pseudo-NMIs are : handled: : : * The first patch adds a barrier we missed from NMI handling due to an : oversight. : : * The second patch refactors some logic around reads from ICC_IAR1_EL1 : and adds commentary to explain what's going on. : : * The third patch descends into madness, reworking gic_handle_irq() to : consistently manage ICC_PMR_EL1 + DAIF and avoid cases where these can : be left in an inconsistent state while softirqs are processed." : . irqchip/gic-v3: Fix priority mask handling irqchip/gic-v3: Refactor ISB + EOIR at ack time irqchip/gic-v3: Ensure pseudo-NMIs have an ISB between ack and handling Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-05-17Merge branch irq/misc-5.19 into irq/irqchip-nextMarc Zyngier
* irq/misc-5.19: : . : Misc fixes and minor improvements: : : - GIC: Improve warning when the firmware tables are inconsistent : : - csky: Use true/false as boolean litterals : : - imx-irqsteer: Add runtime PM support : : - armada-370-xp: Enable CPU affinity for MSIs, avoid messing with : PMU interrupts on some variants : : - aspeed: Fix handling of irq_of_parse_and_map() errors : : - sun6i: Fix sparse warnings : : - xtensa-mx: Fix initial IRQ affinity in non-SMP setup : : - exiu: Fix acknowledgment of edge-triggered interrupts : : - sunxi: Generalise configuration for further reuse : . irqchip: Add Kconfig symbols for sunxi drivers irqchip/armada-370-xp: Do not touch Performance Counter Overflow on A375, A38x, A39x irqchip/gic: Improved warning about incorrect type irqchip/csky: Return true/false (not 1/0) from bool functions irqchip/imx-irqsteer: Add runtime PM support irqchip/imx-irqsteer: Constify irq_chip struct irqchip/armada-370-xp: Enable MSI affinity configuration irqchip/aspeed-scu-ic: Fix irq_of_parse_and_map() return value irqchip/aspeed-i2c-ic: Fix irq_of_parse_and_map() return value irqchip/sun6i-r: Use NULL for chip_data irqchip/xtensa-mx: Fix initial IRQ affinity in non-SMP setup irqchip/exiu: Fix acknowledgment of edge triggered interrupts Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-05-17PM / devfreq: passive: Keep cpufreq_policy for possible cpusChanwoo Choi
The passive governor requires the cpu data to get the next target frequency of devfreq device if depending on cpu. In order to reduce the unnecessary memory data, keep cpufreq_policy data for possible cpus instead of NR_CPU. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-05-17PM / devfreq: passive: Reduce duplicate code when passive_devfreq caseChanwoo Choi
In order to keep the consistent coding style between passive_devfreq and passive_cpufreq, use common code for handling required opp property. Also remove the unneed conditional statement and unify the comment of both passive_devfreq and passive_cpufreq when getting the target frequency. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-05-17PM / devfreq: Add cpu based scaling support to passive governorSaravana Kannan
Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-05-17PM / devfreq: Export devfreq_get_freq_range symbol within devfreqChanwoo Choi
In order to get frequency range within devfreq governors, export devfreq_get_freq_range symbol within devfreq. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-05-17net/mlxbf_gige: use eth_zero_addr() to clear mac addressLu Wei
Use eth_zero_addr() to clear mac address instead of memset(). Signed-off-by: Lu Wei <luwei32@huawei.com> Link: https://lore.kernel.org/r/20220516033343.329178-1-luwei32@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-17swiotlb: max mapping size takes min align mask into accountTianyu Lan
swiotlb_find_slots() skips slots according to io tlb aligned mask calculated from min aligned mask and original physical address offset. This affects max mapping size. The mapping size can't achieve the IO_TLB_SEGSIZE * IO_TLB_SIZE when original offset is non-zero. This will cause system boot up failure in Hyper-V Isolation VM where swiotlb force is enabled. Scsi layer use return value of dma_max_mapping_size() to set max segment size and it finally calls swiotlb_max_mapping_size(). Hyper-V storage driver sets min align mask to 4k - 1. Scsi layer may pass 256k length of request buffer with 0~4k offset and Hyper-V storage driver can't get swiotlb bounce buffer via DMA API. Swiotlb_find_slots() can't find 256k length bounce buffer with offset. Make swiotlb_max_mapping _size() take min align mask into account. Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-05-17ethernet/ti: delete if NULL check befort devm_kfreeBernard Zhao
devm_kfree check the pointer, there is no need to check before devm_kfree call. This change is to cleanup the code a bit. Signed-off-by: Bernard Zhao <bernard@vivo.com> Link: https://lore.kernel.org/r/20220516015208.6526-1-bernard@vivo.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-17irqchip: Add Kconfig symbols for sunxi driversSamuel Holland
Not all of these drivers are needed on every ARCH_SUNXI platform. In particular, the ARCH_SUNXI symbol will be reused for the Allwinner D1, a RISC-V SoC which contains none of these irqchips. Introduce Kconfig symbols so we can select only the drivers actually used by a particular set of platforms. This also lets us move the irqchip driver dependencies to a more appropriate location. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220509034941.30704-1-samuel@sholland.org
2022-05-17xfrm: set dst dev to blackhole_netdev instead of loopback_dev in ifdownXin Long
The global blackhole_netdev has replaced pernet loopback_dev to become the one given to the object that holds an netdev when ifdown in many places of ipv4 and ipv6 since commit 8d7017fd621d ("blackhole_netdev: use blackhole_netdev to invalidate dst entries"). Especially after commit faab39f63c1f ("net: allow out-of-order netdev unregistration"), it's no longer safe to use loopback_dev that may be freed before other netdev. This patch is to set dst dev to blackhole_netdev instead of loopback_dev in ifdown. v1->v2: - add Fixes tag as Eric suggested. Fixes: faab39f63c1f ("net: allow out-of-order netdev unregistration") Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/e8c87482998ca6fcdab214f5a9d582899ec0c648.1652665047.git.lucien.xin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-17clk: imx8mp: fix usb_root_clk parentPeng Fan
According to reference mannual CCGR77(usb) sources from hsio_axi, fix it. Fixes: 9c140d9926761 ("clk: imx: Add support for i.MX8MP clock driver") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220507125430.793287-1-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2022-05-17net: systemport: Fix an error handling path in bcm_sysport_probe()Christophe JAILLET
if devm_clk_get_optional() fails, we still need to go through the error handling path. Add the missing goto. Fixes: 6328a126896ea ("net: systemport: Manage Wake-on-LAN clock") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/99d70634a81c229885ae9e4ee69b2035749f7edc.1652634040.git.christophe.jaillet@wanadoo.fr Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-17arm64: mm: avoid writable executable mappings in kexec/hibernate codeArd Biesheuvel
The temporary mappings of the low-level kexec and hibernate helpers are created with both writable and executable attributes, which is not necessary here, and generally best avoided. So use read-only, executable attributes instead. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20220429131347.3621090-3-ardb@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-05-17arm64: lds: move special code sections out of kernel exec segmentArd Biesheuvel
There are a few code sections that are emitted into the kernel's executable .text segment simply because they contain code, but are actually never executed via this mapping, so they can happily live in a region that gets mapped without executable permissions, reducing the risk of being gadgetized. Note that the kexec and hibernate region contents are always copied into a fresh page, and so there is no need to align them as long as the overall size of each is below 4 KiB. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20220429131347.3621090-2-ardb@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-05-17media: hantro: Enable HOLD_CAPTURE_BUF for H.264Nicolas Dufresne
This is needed to optimize field decoding. Each field will be decoded into the same capture buffer. To be able to queue multiple buffers, we need to be able to ask the driver to hold the capture buffer. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: hantro: Add H.264 field decoding supportNicolas Dufresne
This adds the required code to support field decoding. While most of the code is derived from Rockchip and VSI reference code, the reduction of the reference list to 16 entries was found by trial and errors. The list consists of all the references with the opposite field parity. The strategy is to deduplicate the reference picture that points to the same storage (same index). The choice of opposite parity has been made to keep the other field of the current field pair in the list. This method may not be robust if a field was lost. [hverkuil: fix typos in the comment before deduplicate_reflist()] [hverkuil: document new cur_poc field] Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: hantro: h264: Make dpb entry management more robustJonas Karlman
The driver maintains stable slot locations for reference pictures. This change makes the code more robust by using the reference_ts as key and by marking all entries invalid right from the start. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: hantro: Stop using H.264 parameter pic_numNicolas Dufresne
The hardware expects FrameNumWrap or long_term_frame_idx. Picture numbers are per field, and are mostly used during the memory management process, which is done in userland. This fixes two ITU conformance tests: - MR6_BT_B - MR8_BT_B Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: rkvdec: Enable capture buffer holding for H264Nicolas Dufresne
In order to support interlaced video decoding, the driver must allow holding the capture buffer so that the second field can be decoded into it. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: rkvdec-h264: Add field decoding supportNicolas Dufresne
This makes use of the new feature in the reference builder to program up to 32 references when doing field decoding. It also signals the parity (top or bottom) of the field to the hardware. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: rkvdec: Ensure decoded resolution fit coded resolutionJonas Karlman
Ensure decoded CAPTURE buffer resolution is larger or equal to the coded OUTPUT buffer resolution. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: rkvdec: h264: Fix reference frame_num wrap for second fieldJonas Karlman
When decoding the second field in a complementary field pair the second field is sharing the same frame_num with the first field. Currently the frame_num for the first field is wrapped when it matches the field being decoded, this caused issues decoding the second field in a complementary field pair. Fix this by using inclusive comparison: 'less than or equal'. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: rkvdec: h264: Validate and use pic width and height in mbsJonas Karlman
The width and height in macroblocks is currently configured based on OUTPUT buffer resolution, this works for frame pictures but can cause issues for field pictures. When frame_mbs_only_flag is 0 the height in mbs should be height of the field instead of height of frame. Validate pic_width_in_mbs_minus1 and pic_height_in_map_units_minus1 against OUTPUT buffer resolution and use these values to configure HW. The validation is happening in both try_ctrt() and start() since it is otherwise possible to trick the driver during initialization by changing the OUTPUT format after having set a valid control. [hverkuil: when -> When (first word in a comment block)] Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: rkvdec: Move H264 SPS validation in rkvdec-h264Nicolas Dufresne
No functional change, this moves H264 specific validation into the H264 specific code. This is in preparation of improving this validation and reusing it when VIDIOC_STREAMON is called. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: rkvdec: h264: Fix bit depth wrap in pps packetJonas Karlman
The luma and chroma bit depth fields in the pps packet are 3 bits wide. 8 is wrongly added to the bit depth values written to these 3 bit fields. Because only the 3 LSB are written, the hardware was configured correctly. Correct this by not adding 8 to the luma and chroma bit depth value. Fixes: cd33c830448ba ("media: rkvdec: Add the rkvdec driver") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: rkvdec: h264: Fix dpb_valid implementationNicolas Dufresne
The ref builder only provided references that are marked as valid in the dpb. Thus the current implementation of dpb_valid would always set the flag to 1. This is not representing missing frames (this is called 'non-existing' pictures in the spec). In some context, these non-existing pictures still need to occupy a slot in the reference list according to the spec. Fixes: cd33c830448ba ("media: rkvdec: Add the rkvdec driver") Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: rkvdec: Stop overclocking the decoderNicolas Dufresne
While this overclock hack seems to work on some implementations (some ChromeBooks, RockPi4) it also causes instability on other implementations (notably LibreComputer Renegade, but there were more reports in the LibreELEC project, where this has been removed). While performance is indeed affected (tested with GStreamer), 4K playback still works as long as you don't operate in lock step and keep at least 1 frame ahead of time in the decode queue. After discussion with ChromeOS members, it would seem that their implementation indeed used to synchronously decode each frame, so this hack was simply compensating for their code being less efficient. In my opinion, this hack should not have been included upstream. Fixes: cd33c830448ba ("media: rkvdec: Add the rkvdec driver") Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17net: lan966x: Fix assignment of the MAC addressHoratiu Vultur
The following two scenarios were failing for lan966x. 1. If the port had the address X and then trying to assign the same address, then the HW was just removing this address because first it tries to learn new address and then delete the old one. As they are the same the HW remove it. 2. If the port eth0 was assigned the same address as one of the other ports eth1 then when assigning back the address to eth0 then the HW was deleting the address of eth1. The case 1. is fixed by checking if the port has already the same address while case 2. is fixed by checking if the address is used by any other port. Fixes: e18aba8941b40b ("net: lan966x: add mactable support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220513180030.3076793-1-horatiu.vultur@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-17media: v4l2: Reorder field reflistNicolas Dufresne
As per spec, the field reflist requires interleaving top and bottom field in a specific way that does not fit inside the sort operation. The process consist of alternating references parity, starting with a reference of the same parity as the current picture. This processs is done twice, once for short term references and a second time for the long term references. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: h264: Sort p/b reflist using frame_numNicolas Dufresne
In the reference list builder, frame_num refers to FrameNumWrap in the spec, which is the same as the pic_num for frame decoding. The same applies for long_term_pic_num and long_term_frame_idx. Sort all type of references by frame_num so the sort can be reused for fields reflist were the sorting is done using frame_num instead. In short, pic_num is never actually used for building reference lists. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: v4l2: Trace calculated p/b0/b1 initial reflistNicolas Dufresne
Add debug print statements to print the content of P & B reference lists, to verify that the ordering of the generated reference lists is correct. This is especially important for the field decoding mode, where sorting is more complex. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Sebastian Fricke <sebastian.fricke@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: h264: Store all fields into the unordered listNicolas Dufresne
When the current picture is a field, store each field into the unordered_list and preserve both top and bottom picture order count. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: h264: Store current picture fieldsNicolas Dufresne
This information, also called picture structure, is required in field decoding mode to construct reference lists. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: h264: Increase reference lists size to 32Nicolas Dufresne
This is to accommodate support for field decoding, which splits the top and the bottom references into the reference list. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: h264: Use v4l2_h264_reference for reflistNicolas Dufresne
In preparation for adding field decoding support, convert the byte arrays for reflist into array of struct v4l2_h264_reference. That struct will allow us to mark which field of the reference picture is being referenced. [hverkuil: top_field_order_cnt -> pic_order_count] Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-20 18:06:00 +0000