summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-05-17media: ov7251: fix mutex lock unbalanceMauro Carvalho Chehab
As reported by smatch/sparse: drivers/media/i2c/ov7251.c:1381 ov7251_s_stream() warn: inconsistent returns '&ov7251->lock'. Locked on : 1381 Unlocked on: 1377 There's a lock unbalance at this routine, as it keeps the lock on certain errors. Fix it. Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Add vblank control to ov7251 driverDaniel Scally
Add a vblank control to the ov7251 driver. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Add hblank control to ov7251Daniel Scally
Add a hblank control to the ov7251 driver. This necessitates setting a default mode, for which I am simply picking the first available. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: add ov7251_init_ctrls()Daniel Scally
V4L2 controls initialisation takes up a sizeable portion of the driver's .probe() function. To keep things neat, move it to a dedicated function. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Extend .get_selection() for ov7251Daniel Scally
Extend the .get_selection() callback to support other values for sel->target, primarily to satisfy libcamera's requirements. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: ipu3-cio2: Add INT347E to cio2-bridgeDaniel Scally
The OVTI7251 sensor can be found on x86 laptops with an IPU3, and so needs to be supported by the cio2-bridge. Add it to the table of supported sensors. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Remove .s_power() from ov7251Daniel Scally
The .s_power() callback is deprecated, and now that we have pm_runtime functionality in the driver there's no further use for it. Delete the function. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Add pm_runtime support to ov7251Daniel Scally
Add pm_runtime support to the ov7251 driver. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Add ov7251_detect_chip()Daniel Scally
.probe() is quite busy for this driver; make it cleaner by moving the chip verification to a dedicated function. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Add support for new frequencies to ov7251Daniel Scally
The OV7251 sensor is used as the IR camera sensor on the Microsoft Surface line of tablets; this provides a 19.2MHz external clock, and the Windows driver for this sensor configures a 319.2MHz link freq to the CSI-2 receiver. Add the ability to support those rate to the driver by defining a new set of PLL configs. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Add ov7251_pll_configure()Daniel Scally
Rather than having the pll settings hidden inside mode blobs, define them in structs and use a dedicated function to set them. This makes it simpler to extend the driver to support other frequencies for both the external clock and desired link frequency. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Remove per-mode frequencies from ov7251Daniel Scally
Each of the defined modes in the ov7251 driver uses the same link frequency and pixel rate; just drop those members of the modes and set the controls to read only during initialisation. Add a new table defining the supported pixel rates to substitue for the values hardcoded in the modes. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Provide ov7251_check_hwcfg()Daniel Scally
Move the endpoint checking from .probe() to a dedicated function, and additionally check that the firmware provided link frequencies are a match for those supported by the driver. Store the index to the matching link frequency so it can be easily identified later. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Add acpi support to ov7251Daniel Scally
Add support for enumeration through ACPI to the ov7251 driver Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: ipu3-cio2: Add support for V4L2_PIX_FMT_IPU3_Y10Daniel Scally
We have platforms where a camera sensor transmits Y10 data to the CIO2 device - add support for that (packed) format to the ipu3-cio2 driver. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: uapi: Add IPU3 packed Y10 formatDaniel Scally
Some platforms with an Intel IPU3 have an IR sensor producing 10 bit greyscale format data that is transmitted over a CSI-2 bus to a CIO2 device - this packs the data into 32 bytes per 25 pixels. Add an entry to the uAPI header defining that format. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: ov5645: Remove unneeded of_match_ptr macroMoses Christopher Bollavarapu
of_match_ptr isn't required as CONFIG_OF is already a dependency in Kconfig Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17Revert "clk: sunxi-ng: sun6i-rtc: Add support for H6"Jernej Skrabec
This reverts commit 1738890a3165ccd0da98ebd3e2d5f9b230d5afa8. Commit 1738890a3165 ("clk: sunxi-ng: sun6i-rtc: Add support for H6") breaks HDMI output on Tanix TX6 mini board. Exact reason isn't known, but because that commit doesn't actually improve anything, let's just revert it. Cc: stable@vger.kernel.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220511200206.2458274-1-jernej.skrabec@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-17x86/nmi: Make register_nmi_handler() more robustThomas Gleixner
register_nmi_handler() has no sanity check whether a handler has been registered already. Such an unintended double-add leads to list corruption and hard to diagnose problems during the next NMI handling. Init the list head in the static NMI action struct and check it for being empty in register_nmi_handler(). [ bp: Fixups. ] Reported-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/lkml/20220511234332.3654455-1-seanjc@google.com
2022-05-17media: ov8856: apply digital gain by setting global gain control registerBingbu Cao
MWB gain register are used to set gain for each mwb channel mannually. However, it will involve some artifacts if gain cannot be applied to each channel synchronously. Enable global gain control to set digital global gain instead of setting AWB gain separately to fix this issue. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: ov5648: fix wrong pointer passed to IS_ERR() and PTR_ERR()Yang Yingliang
IS_ERR() and PTR_ERR() use wrong pointer, it should be sensor->dovdd, fix it. Fixes: e43ccb0a045f ("media: i2c: Add support for the OV5648 image sensor") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: Documentation: mc: Add media_device_{init,cleanup}Sakari Ailus
Document that drivers must first initialise a media device before registering it, and clean up once the media device is unregistered. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: Add MIPI CSI-2 28 bits per pixel raw data typeSakari Ailus
Add CSI-2 data type for 28 bits per pixel data. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: ov2640: Depend on V4L2_ASYNCMike Pagano
Add V4L2_ASYNC as a dependency to match other drivers and prevent failures when compile testing. Fixes: ff3cc65cadb5 ("media: v4l: async, fwnode: Improve module organisation") Signed-off-by: Mike Pagano <mpagano@gentoo.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: video-i2c: Use GENMASK for masking bitsMoses Christopher Bollavarapu
Replace 0x0380 with GENMASK(9, 7) to obtain 0b0000_0011_1000_0000 Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: video-i2c: Replace constants with proper namesMoses Christopher Bollavarapu
Acc to MLX90640 datasheet: - 0x0400 represents the start of RAM address - 0x2400 represents the start of EEPROM address Reference: https://www.melexis.com/-/media/files/documents\ /datasheets/mlx90640-datasheet-melexis.pdf Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: video-i2c: Move defines to the top of the fileMoses Christopher Bollavarapu
Currently, the defines in this driver are after some structs and functions, it makes more sense to move them up to the top of the file, so that the constants can be named together with other defines. Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: exynos4-is: Fix compile warningKwanghoon Son
Declare static on function 'fimc_isp_video_device_unregister'. When VIDEO_EXYNOS4_ISP_DMA_CAPTURE=n, compiler warns about warning: no previous prototype for function [-Wmissing-prototypes] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Kwanghoon Son <k.son@samsung.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: adv7180: Add support for the test patternsFabio Estevam
ADV7180 has a built-in mechanism to generate some video patterns, which is very useful for debug/bring-up activities. Add support for it. The test_pattern parameter can be one of the following values: 0: "Single color" 1: "Color bars" 2: "Luma ramp" 3: "Boundary box" 4: "Disable" Tested on a imx6q board with an ADV7280. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: ti: cal: use frame desc to get vc and dtTomi Valkeinen
Use get_frame_desc() to get the frame desc from the connected source, and use the provided virtual channel and datatype instead of hardcoded ones. get_frame_desc() can contain multiple streams, but as we don't support multiple streams yet, we will just always use the first stream. If the source doesn't support get_frame_desc(), fall back to the previous method of always capturing virtual channel 0 and any datatype. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: Add CSI-2 bus configuration to frame descriptorsSakari Ailus
Add CSI-2 bus specific configuration to the frame descriptors. This allows obtaining the virtual channel and data type information for each stream the transmitter is sending. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: Add bus type to frame descriptorsSakari Ailus
Add the media bus type to the frame descriptor. CSI-2 specific information will be added in next patch to the frame descriptor. - Make the bus type a named enum Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: dt-bindings: media: video-interfaces: Add new bus-typeXin Ji
No properly bus-type for DPI video bus, add bus-type 7 for it. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Xin Ji <xji@analogixsemi.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: media/v4l2-core: Add enum V4L2_FWNODE_BUS_TYPE_DPIXin Ji
As V4L2_FWNODE_BUS_TYPE_PARALLEL is not used for DPI interface, this patch add V4L2_FWNODE_BUS_TYPE_DPI for video DPI interface. Signed-off-by: Xin Ji <xji@analogixsemi.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: ov7670: remove ov7670_power_off from ov7670_removeDongliang Mu
In ov7670_probe, it always invokes ov7670_power_off() no matter the execution is successful or failed. So we cannot invoke it agiain in ov7670_remove(). Fix this by removing ov7670_power_off from ov7670_remove. Fixes: 030f9f682e66 ("media: ov7670: control clock along with power") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: dw9807-vcm: Add "dongwoon,dw9807" compatible stringSakari Ailus
There is firmware out there that uses "dongwoon,dw9807" compatible string that never made it to upstream as-is. Add it to the driver to make it load on such systems. The chip also has an EEPROM part which is AT24 compatible (for reading purposes) on a separate I²C address. Adding possible support for this in the future is not affected by this change. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: dt-bindings: Convert Dongwoon dw9807-vcm bindings to json-schemaSakari Ailus
Convert the old text based dw9807-vcm chip DT bindings to json-schema. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: imx412: Add bulk regulator supportBryan O'Donoghue
Depending on the platform we may need to enable and disable three separate regulators for the imx412. - DOVDD Digital I/O power - AVDD Analog power - DVDD Digital core power The addition of these regulators shouldn't affect existing users using fixed-on/firmware-controlled regulators. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: dt-bindings: imx412: Add regulator descriptionsBryan O'Donoghue
The imx412 like many I2C camera sensors has three voltage rails which depending on platform may be necessary to switch power onto directly. Add in as optional rails so as not to break anything for existing users. Cc: Rob Herring <robh+dt@kernel.org> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: imx412: Fix power_off orderingBryan O'Donoghue
The enable path does - gpio - clock The disable path does - gpio - clock Fix the order on the power-off path so that power-off and power-on have the same ordering for clock and gpio. Fixes: 9214e86c0cc1 ("media: i2c: Add imx412 camera sensor driver") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: imx412: Fix reset GPIO polarityBryan O'Donoghue
The imx412/imx577 sensor has a reset line that is active low not active high. Currently the logic for this is inverted. The right way to define the reset line is to declare it active low in the DTS and invert the logic currently contained in the driver. The DTS should represent the hardware does i.e. reset is active low. So: + reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>; not: - reset-gpios = <&tlmm 78 GPIO_ACTIVE_HIGH>; I was a bit reticent about changing this logic since I thought it might negatively impact @intel.com users. Googling a bit though I believe this sensor is used on "Keem Bay" which is clearly a DTS based system and is not upstream yet. Fixes: 9214e86c0cc1 ("media: i2c: Add imx412 camera sensor driver") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17clk: bcm2835: fix bcm2835_clock_choose_divStefan Wahren
The commit 09e3b18ca5de ("clk: bcm2835: Remove unused variable") accidentially breaks the behavior of bcm2835_clock_choose_div() and booting of Raspberry Pi. The removed do_div macro call had side effects, so we need to restore it. Fixes: 09e3b18ca5de ("clk: bcm2835: Remove unused variable") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220428183010.1635248-1-stefan.wahren@i2se.com Tested-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-16Merge tag 'sunxi-clk-for-5.19-1' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-allwinner Pull Allwinner clk driver updates from Jernej Skrabec: - Allwinner H6 RTC clock - Allwinner H616 32 kHz clock * tag 'sunxi-clk-for-5.19-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: h616: Add PLL derived 32KHz clock clk: sunxi-ng: h6-r: Add RTC gate clock
2022-05-16Merge tag 'for-5.19-clk' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-tegra Pull Tegra clk driver updates from Thierry Reding: This contains a boot time optimization for Tegra chips with BPMP and a switch from .round_rate() to .determine_rate() to take into account any maximum rate that might have been set. Other than that this contains a fix for a DFLL regression on Tegra210 and kerneldoc fixups to avoid build warnings. * tag 'for-5.19-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: clk: tegra: Update kerneldoc to match prototypes clk: tegra: Replace .round_rate() with .determine_rate() clk: tegra: Register clocks from root to leaf clk: tegra: Add missing reset deassertion
2022-05-17ALSA: seq: replace ternary operator with max()Guo Zhengkui
Fix the following coccicheck warning: sound/core/seq/seq_ports.c:142:12-14: WARNING opportunity for max() Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Link: https://lore.kernel.org/r/20220517062518.123292-1-guozhengkui@vivo.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-05-16Merge tag 'renesas-clk-for-v5.19-tag2' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas Pull Renesas clk driver updates from Geert Uytterhoeven: - Add support for the R-Car V4H and RZ/V2M SoCs - Add the Universal Flash Storage clock on R-Car S4-8 - Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on RZ/G2UL - Add display clock support on RZ/G2L - Miscellaneous fixes and improvements * tag 'renesas-clk-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: (36 commits) clk: renesas: r9a09g011: Add eth clock and reset entries clk: renesas: Add RZ/V2M support using the rzg2l driver clk: renesas: rzg2l: Add support for RZ/V2M reset monitor reg clk: renesas: rzg2l: Make use of CLK_MON registers optional clk: renesas: rzg2l: Set HIWORD mask for all mux and dividers clk: renesas: rzg2l: Add read only versions of the clk macros clk: renesas: rzg2l: Move the DEF_MUX array size calc into the macro dt-bindings: clock: renesas,rzg2l: Document RZ/V2M SoC clk: renesas: r9a07g044: Fix OSTM1 module clock name clk: renesas: r9a07g043: Add clock and reset entries for ADC clk: renesas: r9a07g043: Add TSU clock and reset entry clk: renesas: r9a07g043: Add RSPI clock and reset entries clk: renesas: r9a07g043: Add clock and reset entries for SPI Multi I/O Bus Controller clk: renesas: r9a07g044: Add DSI clock and reset entries clk: renesas: r9a07g044: Add LCDC clock and reset entries clk: renesas: r9a07g044: Add M4 Clock support clk: renesas: r9a07g044: Add M3 Clock support clk: renesas: r9a07g044: Add {M2, M2_DIV2} Clocks support clk: renesas: r9a07g044: Add M1 clock support clk: renesas: rzg2l: Add DSI divider clk support ...
2022-05-16clk: fixed-rate: Remove redundant if statementLi Zhengyu
(np) is always true when (dev || !np) is false, so just remove the check. Signed-off-by: Li Zhengyu <lizhengyu3@huawei.com> Link: https://lore.kernel.org/r/20220509092102.140520-1-lizhengyu3@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-17nvme: split the enum used for various register constantsChristoph Hellwig
Instead of having one big enum add one for each register or field. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
2022-05-16Input: psmouse-smbus - avoid flush_scheduled_work() usageTetsuo Handa
Flushing system-wide workqueues is dangerous and will be forbidden. Replace system_wq with local psmouse_wq. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/25e2b787-cb2c-fb0d-d62c-6577ad1cd9df@I-love.SAKURA.ne.jp Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-05-16Input: bcm-keypad - remove unneeded NULL check before clk_disable_unprepareWan Jiabing
clk_disable_unprepare() already checks NULL by using IS_ERR_OR_NULL. Remove unneeded NULL check for kp->clk. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20220516085511.10679-1-wanjiabing@vivo.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-21 18:11:03 +0000