| Age | Commit message (Collapse) | Author |
|---|
|
The pkey registers (AMR, IAMR) do not get loaded from the switch frame
so it is pointless to save anything there. Remove the dead code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-2-npiggin@gmail.com
|
|
The amdgpu driver builds some of its code with hard-float enabled,
whereas the rest of the kernel is built with soft-float.
When building with 64-bit long double, if soft-float and hard-float
objects are linked together, the build fails due to incompatible ABI
tags.
In the past there have been build errors in the amdgpu driver caused by
this, some of those were due to bad intermingling of soft & hard-float
code, but those issues have now all been fixed since commit 58ddbecb14c7
("drm/amd/display: move remaining FPU code to dml folder").
However it's still possible for soft & hard-float objects to end up
linked together, if the amdgpu driver is built-in to the kernel along
with the test_emulate_step.c code, which uses soft-float. That happens
in an allyesconfig build.
Currently those build errors are avoided because the amdgpu driver is
gated on 128-bit long double being enabled. But that's not a detail the
amdgpu driver should need to be aware of, and if another driver starts
using hard-float the same problem would occur.
All versions of the 64-bit ABI specify that long-double is 128-bits.
However some compilers, notably the kernel.org ones, are built to use
64-bit long double by default.
Apart from this issue of soft vs hard-float, the kernel doesn't care
what size long double is. In particular the kernel using 128-bit long
double doesn't impact userspace's ability to use 64-bit long double, as
musl does.
So always build the 64-bit kernel with 128-bit long double. That should
avoid any build errors due to the incompatible ABI tags. Excluding the
code that uses soft/hard-float, the vmlinux is identical with/without
the flag.
It does mean any code which is incorrectly intermingling soft &
hard-float code will build without error, so those bugs will need to be
caught by testing rather than at build time.
For more background see:
- commit d11219ad53dc ("amdgpu: disable powerpc support for the newer display engine")
- commit c653c591789b ("drm/amdgpu: Re-enable DCN for 64-bit powerpc")
- https://lore.kernel.org/r/dab9cbd8-2626-4b99-8098-31fe76397d2d@app.fastmail.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://msgid.link/20230404102847.3303623-1-mpe@ellerman.id.au
|
|
Remove arch_atomic_try_cmpxchg_lock function as it is no longer used
since commit 9f61521c7a28 ("powerpc/qspinlock: powerpc qspinlock
implementation")
Signed-off-by: Nysal Jan K.A <nysal@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230224103940.1328725-1-nysal@linux.ibm.com
|
|
Walks the stack when copy_{to,from}_user address is in the stack to
ensure that the object being copied is entirely a single stack frame and
does not contain stack metadata.
Substantially similar to the x86 implementation. The back chain is used
to traverse the stack and identify stack frame boundaries.
Signed-off-by: Nicholas Miehlbradt <nicholas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230228054355.300628-1-nicholas@linux.ibm.com
|
|
Replace open coded reading of "reg" or of_get_address()/
of_translate_address() calls with a single call to
of_address_to_resource().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230329220337.141295-1-robh@kernel.org
|
|
Replace of_get_property()+of_translate_address()+ioremap() with a call
to of_iomap() which does all those steps.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230327223109.820381-1-robh@kernel.org
|
|
Replace of_address_to_resource()+ioremap() with a call to of_iomap()
which does both of those steps.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230327223103.820229-1-robh@kernel.org
|
|
icp_native_init_one_node() only needs the number of entries in "reg".
Replace the open coded "reg" parsing with of_address_count() to get the
number of "reg" entries.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230327223056.820086-1-robh@kernel.org
|
|
"ranges" is a standard property with common parsing functions. Users
shouldn't be implementing their own parsing of it. Reimplement the
ISA brige "ranges" parsing using the common ranges iterator functions.
The common routines are flexible enough to work on PCI and non-PCI to
ISA bridges, so refactor pci_process_ISA_OF_ranges() and
isa_bridge_init_non_pci() into a single implementation.
Signed-off-by: Rob Herring <robh@kernel.org>
[mpe: Unsplit some strings and use pr_xxx()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230327223045.819852-1-robh@kernel.org
|
|
Merge our KVM topic branch to bring some KVM commits into next for wider
testing.
|
|
Now that we can read prefixed instructions from a HV KVM guest and
emulate prefixed load/store instructions to emulated MMIO locations,
we can add HFSCR_PREFIXED into the set of bits that are set in the
HFSCR for a HV KVM guest on POWER10, allowing the guest to use
prefixed instructions.
PR KVM has not yet been extended to handle prefixed instructions in
all situations where we might need to emulate them, so prevent the
guest from enabling prefixed instructions in the FSCR for now.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/ZAgs25dCmLrVkBdU@cleo
|
|
In order to handle emulation of prefixed instructions in the guest,
this first makes vcpu->arch.last_inst be an unsigned long, i.e. 64
bits on 64-bit platforms. For prefixed instructions, the upper 32
bits are used for the prefix and the lower 32 bits for the suffix, and
both halves are byte-swapped if the guest endianness differs from the
host.
Next, vcpu->arch.emul_inst is now 64 bits wide, to match the HEIR
register on POWER10. Like HEIR, for a prefixed instruction it is
defined to have the prefix is in the top 32 bits and the suffix in the
bottom 32 bits, with both halves in the correct byte order.
kvmppc_get_last_inst is extended on 64-bit machines to put the prefix
and suffix in the right places in the ppc_inst_t being returned.
kvmppc_load_last_inst now returns the instruction in an unsigned long
in the same format as vcpu->arch.last_inst. It makes the decision
about whether to fetch a suffix based on the SRR1_PREFIXED bit in the
MSR image stored in the vcpu struct, which generally comes from SRR1
or HSRR1 on an interrupt. This bit is defined in Power ISA v3.1B to
be set if the interrupt occurred due to a prefixed instruction and
cleared otherwise for all interrupts except for instruction storage
interrupt, which does not come to the hypervisor. It is set to zero
for asynchronous interrupts such as external interrupts. In previous
ISA versions it was always set to 0 for all interrupts except
instruction storage interrupt.
The code in book3s_hv_rmhandlers.S that loads the faulting instruction
on a HDSI is only used on POWER8 and therefore doesn't ever need to
load a suffix.
[npiggin@gmail.com - check that the is-prefixed bit in SRR1 matches the
type of instruction that was fetched.]
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/ZAgsq9h1CCzouQuV@cleo
|
|
This changes kvmppc_get_last_inst() so that the instruction it fetches
is returned in a ppc_inst_t variable rather than a u32. This will
allow us to return a 64-bit prefixed instruction on those 64-bit
machines that implement Power ISA v3.1 or later, such as POWER10.
On 32-bit platforms, ppc_inst_t is 32 bits wide, and is turned back
into a u32 by ppc_inst_val, which is an identity operation on those
platforms.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/ZAgsiPlL9O7KnlZZ@cleo
|
|
Pass the hypervisor (H)SRR1[PREFIX] indication through to synchronous
interrupts injected into the guest.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230330103224.3589928-3-npiggin@gmail.com
|
|
The prefix architecture in ISA v3.1 introduces a prefixed bit in SRR1
for many types of synchronous interrupts which is set when the interrupt
is caused by a prefixed instruction.
This requires KVM to be able to set this bit when injecting interrupts
into a guest. Plumb through the SRR1 "flags" argument to the core_queue
APIs where it's missing for this. For now they are set to 0, which is
no change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fixup kvmppc_core_queue_alignment() in booke.c]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230330103224.3589928-2-npiggin@gmail.com
|
|
Fix various W=1 warnings in booke.c:
arch/powerpc/kvm/booke.c:1008:5: error: no previous prototype for ‘kvmppc_handle_exit’ [-Werror=missing-prototypes]
1008 | int kvmppc_handle_exit(struct kvm_vcpu *vcpu, unsigned int exit_nr)
| ^~~~~~~~~~~~~~~~~~
arch/powerpc/kvm/booke.c:1009: warning: Function parameter or member 'vcpu' not described in 'kvmppc_handle_exit'
arch/powerpc/kvm/booke.c:1009: warning: Function parameter or member 'exit_nr' not described in 'kvmppc_handle_exit'
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202304020827.3LEZ86WB-lkp@intel.com/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230403045314.3095410-1-mpe@ellerman.id.au
|
|
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310144735.1546817-1-robh@kernel.org
|
|
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310144659.1541127-1-robh@kernel.org
|
|
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
[mpe: Drop change in ppc4xx_probe_pci_bridge(), formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310144657.1541039-1-robh@kernel.org
|
|
Add lockdep annotations for the following properties that must hold:
* Any error log retrieval must be atomically coupled with the prior
RTAS call, without a window for another RTAS call to occur before the
error log can be retrieved.
* All users of the core rtas_args parameter block must hold rtas_lock.
Move the definitions of rtas_lock and rtas_args up in the file so that
__do_enter_rtas_trace() can refer to them.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-6-010e4416f13f@linux.ibm.com
|
|
The 'filter' member is a pointer, not a bool; fix the wording
accordingly.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-4-010e4416f13f@linux.ibm.com
|
|
Add documentation for rtas_call_unlocked(), including details on how
it differs from rtas_call().
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-3-010e4416f13f@linux.ibm.com
|
|
Using memcpy() isn't safe when buf is identical to rtas_err_buf, which
can happen during boot before slab is up. Full context which may not
be obvious from the diff:
if (altbuf) {
buf = altbuf;
} else {
buf = rtas_err_buf;
if (slab_is_available())
buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC);
}
if (buf)
memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX);
This was found by inspection and I'm not aware of it causing problems
in practice. It appears to have been introduced by commit
033ef338b6e0 ("powerpc: Merge rtas.c into arch/powerpc/kernel"); the
old ppc64 version of this code did not have this problem.
Use memmove() instead.
Fixes: 033ef338b6e0 ("powerpc: Merge rtas.c into arch/powerpc/kernel")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-2-010e4416f13f@linux.ibm.com
|
|
CHRP and PAPR agree: "In order to make an RTAS call, the operating
system must construct an argument call buffer aligned on an eight byte
boundary in physically contiguous real memory [...]." (7.2.7 Calling
Mechanism and Conventions).
struct rtas_args is the type used for this argument call buffer. The
unarchitected 'rets' member happens to produce 8-byte alignment for
the struct on 64-bit targets in practice. But without an alignment
directive the structure will have only 4-byte alignment on 32-bit
targets:
$ nm b/{before,after}/chrp32/vmlinux | grep rtas_args
c096881c b rtas_args
c0968820 b rtas_args
Add an alignment directive to the struct rtas_args declaration so all
instances have the alignment required by the specs. rtas-types.h no
longer refers to any spinlock types, so drop the spinlock_types.h
inclusion while we're here.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-1-010e4416f13f@linux.ibm.com
|
|
LEDS_TRIGGER_DISK depends on ATA, so selecting LEDS_TRIGGER_DISK
when ATA is not set/enabled causes a Kconfig warning:
WARNING: unmet direct dependencies detected for LEDS_TRIGGER_DISK
Depends on [n]: NEW_LEDS [=y] && LEDS_TRIGGERS [=y] && ATA [=n]
Selected by [y]:
- ADB_PMU_LED_DISK [=y] && MACINTOSH_DRIVERS [=y] && ADB_PMU_LED [=y] && LEDS_CLASS [=y]
Fix this by making ADB_PMU_LED_DISK depend on ATA.
Seen on both PPC32 and PPC64.
Fixes: 0e865a80c135 ("macintosh: Remove dependency on IDE_GD_ATA if ADB_PMU_LED_DISK is selected")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223014241.20878-1-rdunlap@infradead.org
|
|
Use "%pa" format specifier for resource_size_t to avoid a compiler
printk format warning.
arch/powerpc/sysdev/tsi108_pci.c: In function 'tsi108_setup_pci':
include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t'
Fixes: c4342ff92bed ("[POWERPC] Update mpc7448hpc2 board irq support using device tree")
Fixes: 2b9d7467a6db ("[POWERPC] Add tsi108 pci and platform device data register function")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[mpe: Use pr_info() and unsplit string]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-5-rdunlap@infradead.org
|
|
Use "%pa" format specifier for resource_size_t to avoid compiler
printk format warnings.
../arch/powerpc/platforms/embedded6xx/flipper-pic.c: In function 'flipper_pic_init':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
../arch/powerpc/platforms/embedded6xx/flipper-pic.c:148:9: note: in expansion of macro 'pr_info'
148 | pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
| ^~~~~~~
../arch/powerpc/platforms/embedded6xx/hlwd-pic.c: In function 'hlwd_pic_init':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
../arch/powerpc/platforms/embedded6xx/hlwd-pic.c:174:9: note: in expansion of macro 'pr_info'
174 | pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
| ^~~~~~~
../arch/powerpc/platforms/embedded6xx/wii.c: In function 'wii_ioremap_hw_regs':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
../arch/powerpc/platforms/embedded6xx/wii.c:77:17: note: in expansion of macro 'pr_info'
77 | pr_info("%s at 0x%08x mapped to 0x%p\n", name,
| ^~~~~~~
Fixes: 028ee972f032 ("powerpc: gamecube/wii: flipper interrupt controller support")
Fixes: 9c21025c7845 ("powerpc: wii: hollywood interrupt controller support")
Fixes: 5a7ee3198dfa ("powerpc: wii: platform support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-3-rdunlap@infradead.org
|
|
Use "%pa" format specifier for resource_size_t to avoid a compiler
printk format warning.
../arch/powerpc/platforms/512x/clock-commonclk.c: In function 'mpc5121_clk_provide_backwards_compat':
../arch/powerpc/platforms/512x/clock-commonclk.c:989:44: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
989 | snprintf(devname, sizeof(devname), "%08x.%s", res.start, np->name); \
| ^~~~~~~~~ ~~~~~~~~~
| |
| resource_size_t {aka long long unsigned int}
Prevents 24 such warnings.
Fixes: 01f25c371658 ("clk: mpc512x: add backwards compat to the CCF code")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-2-rdunlap@infradead.org
|
|
Unlike PVR_POWER8, etc ...., PVR_7450 represents a full PVR
value and not a family value.
To avoid confusion, do like E500 family and define the relevant
PVR_VER_xxxx values for the 7450 family:
0x8000 ==> 7450
0x8001 ==> 7455
0x8002 ==> 7447
0x8003 ==> 7447A
0x8004 ==> 7448
And use them to detect 7450 family for perf events.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202302260657.7dM9Uwev-lkp@intel.com/
Fixes: ec3eb9d941a9 ("powerpc/perf: Use PVR rather than oprofile field to determine CPU version")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/99ca1da2e5a6cf82a8abf4bc034918e500e31781.1677513277.git.christophe.leroy@csgroup.eu
|
|
dd logs info to stderr by default. This info is pointless in the
selftests and makes legitimate issues harder to spot.
Pass the option to silence the info logs. Actual errors would still be
printed.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230228000709.124727-4-bgray@linux.ibm.com
|
|
Make supports passing the 'jobserver' (parallel make support) to child
invocations of make when either
1. The target command uses $(MAKE) directly
2. The command starts with '+'
This context is not passed through expansions that result in $(MAKE), so
the macros used in several places fail to pass on the jobserver context.
Warnings are also raised by the child mentioning this.
Prepend macros lines that invoke $(MAKE) with '+' to allow passing the
jobserver context to these children.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230228000709.124727-3-bgray@linux.ibm.com
|
|
The CLEAN macro was added in 337f1e36 to prevent the
Makefile:50: warning: overriding recipe for target 'clean'
../../lib.mk:124: warning: ignoring old recipe for target 'clean'
style warnings. Expand it's use to fix another case of redefining a
target directly.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230228000709.124727-2-bgray@linux.ibm.com
|
|
This is follow up change after 14b5d59a261b ("powerpc/pseries: Fix
formatting to make code look more beautiful") to conform to kernel
coding style.
Signed-off-by: Petr Vaněk <arkamar@atlas.cz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230324220041.11378-1-arkamar@atlas.cz
|
|
We call of_node_get() in wf_sat_probe() after sat is created,
so we need the of_node_put() before *kfree(sat)*.
Fixes: ac171c46667c ("[PATCH] powerpc: Thermal control for dual core G5s")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230330033558.2562778-1-windhl@126.com
|
|
Commit 21b56c847753 ("iov_iter: get rid of separate bvec and xarray
callbacks") removed the calls to memcpy_page_flushcache().
Remove the unnecessary memcpy_page_flushcache() call.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20221230-kmap-x86-v1-2-15f1ecccab50@intel.com
|
|
kvmppc_hv_entry isn't called from anywhere other than
book3s_hv_rmhandlers.S itself. Remove .global scope for this function
and annotate it with SYM_CODE_START_LOCAL and SYM_CODE_END.
Signed-off-by: Kautuk Consul <kconsul@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230327113320.3407491-1-kconsul@linux.vnet.ibm.com
|
|
There is no need to declare an extra tables to just create directory,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310232850.3960676-3-mcgrof@kernel.org
|
|
Tag a few functions that are local and don't have a previous prototype
as "static".
No functional change intended.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303031630.ntvIuYqo-lkp@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230308232437.500031-1-seanjc@google.com
|
|
There is no need to declare an extra tables to just create directory,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310232850.3960676-2-mcgrof@kernel.org
|
|
ppc_md.calibrate_decr() is a mandatory item. Its nullity is never
checked so it must be non null on all platforms.
Most platforms define generic_calibrate_decr() as their
ppc_md.calibrate_decr(). Have time_init() call
generic_calibrate_decr() when ppc_md.calibrate_decr() is NULL,
and remove default assignment from all machines.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
|
|
p1023_rdb platform is a copy of mpc85xx_rdb platform and some of its
functions have kept mpc85xx_rdb names.
Rename the said functions.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
|
|
Instead of checking machine type in the function,
use machine_device_initcall().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
|
|
This machine matches two compatibles and sets .pci_irq_fixup
on one of them.
Split it into two machines, then the probe function can be dropped.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Drop references to ppc47x_probe() to fix build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
|
|
Use the new 'compatible' property for simple cases.
checkpatch complains about the new compatible being undocumented
but in reality nothing is new so just ignore it for the time
being.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
|
|
Most probe functions do nothing else than checking whether
the machine is compatible to a given string.
Define that string in ppc_md structure and check it directly from
probe_machine() instead of using ppc_md.probe() for that.
Keep checking in ppc_md.probe() only for more complex probing.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
|
|
Machine name in struct machdep_calls should never be modified.
Mark it const.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
|
|
Commit 5017b4594672 ("powerpc/64: Option to build big-endian with ELFv2
ABI") restricted the ELFv2 ABI configuration such that it can only be
selected when linking with ld.bfd, due to lack of testing with LLVM.
ld.lld can link ELFv2 kernels without any issues; in fact, it is the
only ABI that ld.lld supports, as ELFv1 is not supported in ld.lld.
As this has not seen a ton of real world testing yet, be conservative
and only allow this option to be selected with the latest stable release
of LLVM (15.x) and newer.
While in the area, remove 'default n', as it is unnecessary to specify
it explicitly since all boolean/tristate configuration symbols default
to n.
Tested-by: "Erhard F." <erhard_f@mailbox.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230118-ppc64-elfv2-llvm-v1-3-b9e2ec9da11d@kernel.org
|
|
'-mabi=elfv2' is not added to clang's invocations when
CONFIG_PPC64_ELF_ABI_V2 is enabled, resulting in the generation of elfv1
code, as evidenced by the orphan section warnings/errors:
ld.lld: error: vmlinux.a(arch/powerpc/kernel/prom_init.o):(.opd) is being placed in '.opd'
ld.lld: error: vmlinux.a(init/main.o):(.opd) is being placed in '.opd'
ld.lld: error: vmlinux.a(init/version.o):(.opd) is being placed in '.opd'
To resolve this, add '-mabi=elfv2' to CFLAGS with clang. This uncovers
an issue in the 32-bit vDSO:
error: unknown target ABI 'elfv2'
The ELFv2 ABI cannot be used when building code for a 32-bit target. To
resolve this, just remove the '-mabi' flags from the assembler flags, as
it was only needed for preprocessing (the _CALL_ELF macro) but this was
cleaned up in commit 5b89492c03e5 ("powerpc: Finalise cleanup around ABI
use").
Tested-by: "Erhard F." <erhard_f@mailbox.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230118-ppc64-elfv2-llvm-v1-2-b9e2ec9da11d@kernel.org
|
|
When CONFIG_PPC64_ELF_ABI_V2 is enabled with clang through
CONFIG_PPC64_BIG_ENDIAN_ELF_ABI_V2, building the powerpc boot wrapper
in 32-bit mode (i.e. with CONFIG_PPC64_BOOT_WRAPPER=n) fails with:
error: unknown target ABI 'elfv2'
The ABI cannot be changed with '-m32'; GCC silently accepts it but clang
errors out. Only provide '-mabi=elfv2' when CONFIG_PPC64_BOOT_WRAPPER is
enabled, which is the only way '-mabi=elfv2' will be useful.
Tested-by: "Erhard F." <erhard_f@mailbox.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230118-ppc64-elfv2-llvm-v1-1-b9e2ec9da11d@kernel.org
|
|
mmcra_thresh_marked_sample_test
The testcase verifies the setting of different fields in Monitor Mode
Control Register A (MMCRA). In the current code, EV_CODE_EXTRACT macro
is used to extract the "sample" field, which then needs to be further
processed to fetch rand_samp_elig and rand_samp_mode bits. But the
current code is not passing valid sample field to EV_CODE_EXTRACT
macro. Patch addresses this by fixing the input for EV_CODE_EXTRACT.
Fixes: 29cf373c5766 ("selftests/powerpc/pmu: Add interface test for mmcra register fields")
Reported-by: David Binderman <dcb314@hotmail.com>
Link: https://lore.kernel.org/r/DB6P189MB0568CF002762C6C43AF6DF169CA89@DB6P189MB0568.EURP189.PROD.OUTLOOK.COM
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230301170918.69176-1-kjain@linux.ibm.com
|
