summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-03Merge tag 'amlogic-fixes-v6.3-rc' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixes Amlogic fixes for v6.3-rc: - fix conflicts between DMC memory space and Amlogic perf driver * tag 'amlogic-fixes-v6.3-rc' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: perf/amlogic: adjust register offsets arm64: dts: meson-g12-common: resolve conflict between canvas & pmu arm64: dts: meson-g12-common: specify full DMC range Link: https://lore.kernel.org/r/db5fcdb4-60e8-95e6-06b5-1ac474ecabe3@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-03Merge tag 'optee-fix-for-v6.3' of ↵Arnd Bergmann
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes Fixes a spell error in an error message in the OP-TEE driver * tag 'optee-fix-for-v6.3' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: optee: Fix typo Unuspported -> Unsupported Link: https://lore.kernel.org/r/20230314184441.GA2936721@rayden Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-03bpf, arm64: Fixed a BTI error on returning to patched functionXu Kuohai
When BPF_TRAMP_F_CALL_ORIG is set, BPF trampoline uses BLR to jump back to the instruction next to call site to call the patched function. For BTI-enabled kernel, the instruction next to call site is usually PACIASP, in this case, it's safe to jump back with BLR. But when the call site is not followed by a PACIASP or bti, a BTI exception is triggered. Here is a fault log: Unhandled 64-bit el1h sync exception on CPU0, ESR 0x0000000034000002 -- BTI CPU: 0 PID: 263 Comm: test_progs Tainted: GF Hardware name: linux,dummy-virt (DT) pstate: 40400805 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=-c) pc : bpf_fentry_test1+0xc/0x30 lr : bpf_trampoline_6442573892_0+0x48/0x1000 sp : ffff80000c0c3a50 x29: ffff80000c0c3a90 x28: ffff0000c2e6c080 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000050 x23: 0000000000000000 x22: 0000ffffcfd2a7f0 x21: 000000000000000a x20: 0000ffffcfd2a7f0 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffcfd2a7f0 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: ffff80000914f5e4 x9 : ffff8000082a1528 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0101010101010101 x5 : 0000000000000000 x4 : 00000000fffffff2 x3 : 0000000000000001 x2 : ffff8001f4b82000 x1 : 0000000000000000 x0 : 0000000000000001 Kernel panic - not syncing: Unhandled exception CPU: 0 PID: 263 Comm: test_progs Tainted: GF Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0xec/0x144 show_stack+0x24/0x7c dump_stack_lvl+0x8c/0xb8 dump_stack+0x18/0x34 panic+0x1cc/0x3ec __el0_error_handler_common+0x0/0x130 el1h_64_sync_handler+0x60/0xd0 el1h_64_sync+0x78/0x7c bpf_fentry_test1+0xc/0x30 bpf_fentry_test1+0xc/0x30 bpf_prog_test_run_tracing+0xdc/0x2a0 __sys_bpf+0x438/0x22a0 __arm64_sys_bpf+0x30/0x54 invoke_syscall+0x78/0x110 el0_svc_common.constprop.0+0x6c/0x1d0 do_el0_svc+0x38/0xe0 el0_svc+0x30/0xd0 el0t_64_sync_handler+0x1ac/0x1b0 el0t_64_sync+0x1a0/0x1a4 Kernel Offset: disabled CPU features: 0x0000,00034c24,f994fdab Memory Limit: none And the instruction next to call site of bpf_fentry_test1 is ADD, not PACIASP: <bpf_fentry_test1>: bti c nop nop add w0, w0, #0x1 paciasp For BPF prog, JIT always puts a PACIASP after call site for BTI-enabled kernel, so there is no problem. To fix it, replace BLR with RET to bypass the branch target check. Fixes: efc9909fdce0 ("bpf, arm64: Add bpf trampoline for arm64") Reported-by: Florent Revest <revest@chromium.org> Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Florent Revest <revest@chromium.org> Acked-by: Florent Revest <revest@chromium.org> Link: https://lore.kernel.org/bpf/20230401234144.3719742-1-xukuohai@huaweicloud.com
2023-04-03gpio: davinci: Add irq chip flag to skip set wakeDhruva Gole
Add the IRQCHIP_SKIP_SET_WAKE flag since there are no special IRQ Wake bits that can be set to enable wakeup IRQ. Fixes: 3d9edf09d452 ("[ARM] 4457/2: davinci: GPIO support") Signed-off-by: Dhruva Gole <d-gole@ti.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-04-03gpio: davinci: Do not clear the bank intr enable bit in save_contextDhruva Gole
The interrupt enable bits might be set if we want to use the GPIO as wakeup source. Clearing this will mean disabling of interrupts in the GPIO banks that we may want to wakeup from. Thus remove the line that was clearing this bit from the driver's save context function. Cc: Devarsh Thakkar <devarsht@ti.com> Fixes: 0651a730924b ("gpio: davinci: Add support for system suspend/resume PM") Signed-off-by: Dhruva Gole <d-gole@ti.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-04-03wifi: mt76: ignore key disable commandsFelix Fietkau
This helps avoid cleartext leakage of already queued or powersave buffered packets, when a reassoc triggers the key deletion. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230330091259.61378-1-nbd@nbd.name
2023-04-03wifi: ath11k: reduce the MHI timeout to 20sKalle Valo
Currently ath11k breaks after hibernation, the reason being that ath11k expects that the wireless device will have power during suspend and the firmware will continue running. But of course during hibernation the power from the device is cut off and firmware is not running when resuming, so ath11k will fail. (The reason why ath11k needs the firmware running is the interaction between mac80211 and MHI stack, it's a long story and more info in the bugzilla report.) In SUSE kernels the watchdog timeout is reduced from the default 120 to 60 seconds: CONFIG_DPM_WATCHDOG_TIMEOUT=60 But as the ath11k MHI timeout is 90 seconds the kernel will crash before will ath11k will recover in resume callback. To avoid the crash reduce the MHI timeout to just 20 seconds. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9 Link: https://bugzilla.kernel.org/show_bug.cgi?id=214649 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230329162038.8637-1-kvalo@kernel.org
2023-04-03wifi: rt2x00: Fix memory leak when handling surveysArmin Wolf
When removing a rt2x00 device, its associated channel surveys are not freed, causing a memory leak observable with kmemleak: unreferenced object 0xffff9620f0881a00 (size 512): comm "systemd-udevd", pid 2290, jiffies 4294906974 (age 33.768s) hex dump (first 32 bytes): 70 44 12 00 00 00 00 00 92 8a 00 00 00 00 00 00 pD.............. 00 00 00 00 00 00 00 00 ab 87 01 00 00 00 00 00 ................ backtrace: [<ffffffffb0ed858b>] __kmalloc+0x4b/0x130 [<ffffffffc1b0f29b>] rt2800_probe_hw+0xc2b/0x1380 [rt2800lib] [<ffffffffc1a9496e>] rt2800usb_probe_hw+0xe/0x60 [rt2800usb] [<ffffffffc1ae491a>] rt2x00lib_probe_dev+0x21a/0x7d0 [rt2x00lib] [<ffffffffc1b3b83e>] rt2x00usb_probe+0x1be/0x980 [rt2x00usb] [<ffffffffc05981e2>] usb_probe_interface+0xe2/0x310 [usbcore] [<ffffffffb13be2d5>] really_probe+0x1a5/0x410 [<ffffffffb13be5c8>] __driver_probe_device+0x78/0x180 [<ffffffffb13be6fe>] driver_probe_device+0x1e/0x90 [<ffffffffb13be972>] __driver_attach+0xd2/0x1c0 [<ffffffffb13bbc57>] bus_for_each_dev+0x77/0xd0 [<ffffffffb13bd2a2>] bus_add_driver+0x112/0x210 [<ffffffffb13bfc6c>] driver_register+0x5c/0x120 [<ffffffffc0596ae8>] usb_register_driver+0x88/0x150 [usbcore] [<ffffffffb0c011c4>] do_one_initcall+0x44/0x220 [<ffffffffb0d6134c>] do_init_module+0x4c/0x220 Fix this by freeing the channel surveys on device removal. Tested with a RT3070 based USB wireless adapter. Fixes: 5447626910f5 ("rt2x00: save survey for every channel visited") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230330215637.4332-1-W_Armin@gmx.de
2023-04-03wifi: b43legacy: Remove the unused function prev_slot()Jiapeng Chong
The function prev_slot is defined in the dma.c file, but not called elsewhere, so remove this unused function. drivers/net/wireless/broadcom/b43legacy/dma.c:130:19: warning: unused function 'prev_slot'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4642 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230330021841.67724-1-jiapeng.chong@linux.alibaba.com
2023-04-03wifi: rtw89: Remove redundant pci_clear_masterCai Huoqing
Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230323112613.7550-5-cai.huoqing@linux.dev
2023-04-03wifi: rtw89: fix potential race condition between napi_init and napi_enablePing-Ke Shih
A race condition can happen if netdev is registered, but NAPI isn't initialized yet, and meanwhile user space starts the netdev that will enable NAPI. Then, it hits BUG_ON(): kernel BUG at net/core/dev.c:6423! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 417 Comm: iwd Not tainted 6.2.7-slab-dirty #3 eb0f5a8a9d91 Hardware name: LENOVO 21DL/LNVNB161216, BIOS JPCN20WW(V1.06) 09/20/2022 RIP: 0010:napi_enable+0x3f/0x50 Code: 48 89 c2 48 83 e2 f6 f6 81 89 08 00 00 02 74 0d 48 83 ... RSP: 0018:ffffada1414f3548 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa01425802080 RCX: 0000000000000000 RDX: 00000000000002ff RSI: ffffada14e50c614 RDI: ffffa01425808dc0 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000100 R12: ffffa01425808f58 R13: 0000000000000000 R14: ffffa01423498940 R15: 0000000000000001 FS: 00007f5577c0a740(0000) GS:ffffa0169fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5577a19972 CR3: 0000000125a7a000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> rtw89_pci_ops_start+0x1c/0x70 [rtw89_pci 6cbc75429515c181cbc386478d5cfb32ffc5a0f8] rtw89_core_start+0xbe/0x160 [rtw89_core fe07ecb874820b6d778370d4acb6ef8a37847f22] rtw89_ops_start+0x26/0x40 [rtw89_core fe07ecb874820b6d778370d4acb6ef8a37847f22] drv_start+0x42/0x100 [mac80211 c07fa22af8c3cf3f7d7ab3884ca990784d72e2d2] ieee80211_do_open+0x311/0x7d0 [mac80211 c07fa22af8c3cf3f7d7ab3884ca990784d72e2d2] ieee80211_open+0x6a/0x90 [mac80211 c07fa22af8c3cf3f7d7ab3884ca990784d72e2d2] __dev_open+0xe0/0x180 __dev_change_flags+0x1da/0x250 dev_change_flags+0x26/0x70 do_setlink+0x37c/0x12c0 ? ep_poll_callback+0x246/0x290 ? __nla_validate_parse+0x61/0xd00 ? __wake_up_common_lock+0x8f/0xd0 To fix this, follow Jonas' suggestion to switch the order of these functions and move register netdev to be the last step of PCI probe. Also, correct the error handling of rtw89_core_register_hw(). Fixes: e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver") Cc: stable@vger.kernel.org Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Link: https://lore.kernel.org/linux-wireless/CAOiHx=n7EwK2B9CnBR07FVA=sEzFagb8TkS4XC_qBNq8OwcYUg@mail.gmail.com/T/#t Suggested-by: Jonas Gorski <jonas.gorski@gmail.com> Tested-by: Larry Finger<Larry.Finger@lwfinger.net> Reviewed-by: Larry Finger<Larry.Finger@lwfinger.net> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230323082839.20474-1-pkshih@realtek.com
2023-04-03wifi: rtw89: config EDCCA threshold during scan to prevent TX failedChih-Kang Chang
Need to configure EDCCA threshold to default value before scan, and recall original value after scan to prevent probe request can't be sent out. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230322060238.43922-1-pkshih@realtek.com
2023-04-03wifi: rtw89: fix incorrect channel info during scan due to ppdu_sts filteringChih-Kang Chang
We use ppdu_sts to obtain channel information from hardware, to ensure that the scan results have correct channel information. However, some of ppdu_sts that is filtered by the to_self check is also needed for the scan results. Therefore, we modify the filter part in front of CFO count. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230320093112.30466-3-pkshih@realtek.com
2023-04-03wifi: rtw89: remove superfluous H2C of join_infoChin-Yen Lee
We find that when starting WoWLAN, the second join_info H2C is unnecessary and leads WoWLAN not enter power save mode if using new firmware, so remove it. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230320093112.30466-2-pkshih@realtek.com
2023-04-03wifi: rtw89: set data lowest rate according to AP supported rateChih-Kang Chang
By default the driver uses the 1M and 6M rate (0x0) for data frames in 2 GHz and 5/6 GHz bands respectively. But the rate that might not AP supported. Therefore, We modify the data lowest rate according to the lowest of AP supported rate. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230320093112.30466-1-pkshih@realtek.com
2023-04-03wifi: rtw89: add counters of register-based H2C/C2HPing-Ke Shih
The register-based H2C/C2H are used to exchange information between driver and firmware, but only apply to narrow area because its data size is smaller than regular packet-based H2C/C2H. This kind of H2C/C2H must be paired. To identify if any H2C/C2H is missing, update counters to help diagnose this kind of problems. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230316063956.71687-1-pkshih@realtek.com
2023-04-03wifi: rtw89: coex: Update Wi-Fi Bluetooth coexistence version to 7.0.1Ching-Te Ku
Update driver with the supported firmware version of the below item. Bluetooth firmware BT_Coex_Ver: 0x07 Wi-Fi firmware version: RTL8852C->v0.27.56.10 RTL8852A->v0.24.36 RTL8852B->v0.29.29 Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230314020617.28193-6-pkshih@realtek.com
2023-04-03wifi: rtw89: coex: Add report control v5 variationChing-Te Ku
In order to reduce firmware code size cost, remove some counter value from the structure. But firmware didn't update version code. To parse the correct report, add another variation version v105 to parse it. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230314020617.28193-5-pkshih@realtek.com
2023-04-03wifi: rtw89: coex: Update RTL8852B LNA2 hardware parameterChing-Te Ku
The LNA gain didn't set before, it will lead some WiFi RX issue. And the setting can increase both of WiFi & BT performance while they are both RX. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230314020617.28193-4-pkshih@realtek.com
2023-04-03wifi: rtw89: coex: Not to enable firmware report when WiFi is power savingChing-Te Ku
If driver enable firmware report during WiFi power saving, the firmware timer will lead to some power saving issue like, fail to enter LPS, can not leave LPS or some unexpected issue. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230314020617.28193-3-pkshih@realtek.com
2023-04-03wifi: rtw89: coex: Add LPS protocol radio state for RTL8852BChing-Te Ku
This LPS state will not turn off RF, and it can still do some basic traffic, only RTL8852B has the state. Coexistence need let Bluetooth know WiFi is still alive to prevent some Bluetooth performance issue. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230314020617.28193-2-pkshih@realtek.com
2023-04-03platform/x86: thinkpad_acpi: Add missing T14s Gen1 type to s2idle quirk listBenjamin Asbach
From the commit message adding the first s2idle quirks: > Lenovo laptops that contain NVME SSDs across a variety of generations have > trouble resuming from suspend to idle when the IOMMU translation layer is > active for the NVME storage device. > > This generally manifests as a large resume delay or page faults. These > delays and page faults occur as a result of a Lenovo BIOS specific SMI > that runs during the D3->D0 transition on NVME devices. Add the DMI ids for another variant of the T14s Gen1, which also needs the s2idle quirk. Link: https://lore.kernel.org/all/20220503183420.348-1-mario.limonciello@amd.com/ Link: https://bbs.archlinux.org/viewtopic.php?pid=2084655#p2084655 Signed-off-by: Benjamin Asbach <asbachb.kernel@impl.it> Tested-by: Benjamin Asbach <asbachb.kernel@impl.it> Link: https://lore.kernel.org/r/20230331232447.37204-1-asbachb.kernel@impl.it Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-04-03platform/x86: think-lmi: Clean up display of current_value on ThinkstationMark Pearson
On ThinkStations on retrieving the attribute value the BIOS appends the possible values to the string. Clean up the display in the current_value_show function so the options part is not displayed. Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms") Reported by Mario Limoncello <Mario.Limonciello@amd.com> Link: https://github.com/fwupd/fwupd/issues/5077#issuecomment-1488730526 Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20230403013120.2105-2-mpearson-lenovo@squebb.ca Tested-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-04-03platform/x86: think-lmi: Fix memory leaks when parsing ThinkStation WMI stringsMark Pearson
My previous commit introduced a memory leak where the item allocated from tlmi_setting was not freed. This commit also renames it to avoid confusion with the similarly name variable in the same function. Fixes: 8a02d70679fc ("platform/x86: think-lmi: Add possible_values for ThinkStation") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Link: https://lore.kernel.org/lkml/df26ff45-8933-f2b3-25f4-6ee51ccda7d8@gmx.de/T/ Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20230403013120.2105-1-mpearson-lenovo@squebb.ca Tested-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-04-03platform/x86: think-lmi: Fix memory leak when showing current settingsArmin Wolf
When retriving a item string with tlmi_setting(), the result has to be freed using kfree(). In current_value_show() however, malformed item strings are not freed, causing a memory leak. Fix this by eliminating the early return responsible for this. Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Link: https://lore.kernel.org/platform-driver-x86/01e920bc-5882-ba0c-dd15-868bf0eca0b8@alu.unizg.hr/T/#t Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Fixes: 0fdf10e5fc96 ("platform/x86: think-lmi: Split current_value to reflect only the value") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20230331213319.41040-1-W_Armin@gmx.de Tested-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-04-03ipv6: Fix an uninit variable access bug in __ip6_make_skb()Ziyang Xuan
Syzbot reported a bug as following: ===================================================== BUG: KMSAN: uninit-value in arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline] BUG: KMSAN: uninit-value in arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline] BUG: KMSAN: uninit-value in atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline] BUG: KMSAN: uninit-value in __ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956 arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline] arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline] atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline] __ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956 ip6_finish_skb include/net/ipv6.h:1122 [inline] ip6_push_pending_frames+0x10e/0x550 net/ipv6/ip6_output.c:1987 rawv6_push_pending_frames+0xb12/0xb90 net/ipv6/raw.c:579 rawv6_sendmsg+0x297e/0x2e60 net/ipv6/raw.c:922 inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530 __sys_sendmsg net/socket.c:2559 [inline] __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x367/0x540 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook mm/slab.h:766 [inline] slab_alloc_node mm/slub.c:3452 [inline] __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491 __do_kmalloc_node mm/slab_common.c:967 [inline] __kmalloc_node_track_caller+0x114/0x3b0 mm/slab_common.c:988 kmalloc_reserve net/core/skbuff.c:492 [inline] __alloc_skb+0x3af/0x8f0 net/core/skbuff.c:565 alloc_skb include/linux/skbuff.h:1270 [inline] __ip6_append_data+0x51c1/0x6bb0 net/ipv6/ip6_output.c:1684 ip6_append_data+0x411/0x580 net/ipv6/ip6_output.c:1854 rawv6_sendmsg+0x2882/0x2e60 net/ipv6/raw.c:915 inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530 __sys_sendmsg net/socket.c:2559 [inline] __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x367/0x540 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd It is because icmp6hdr does not in skb linear region under the scenario of SOCK_RAW socket. Access icmp6_hdr(skb)->icmp6_type directly will trigger the uninit variable access bug. Use a local variable icmp6_type to carry the correct value in different scenarios. Fixes: 14878f75abd5 ("[IPV6]: Add ICMPMsgStats MIB (RFC 4293) [rev 2]") Reported-by: syzbot+8257f4dcef79de670baf@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=3d605ec1d0a7f2a269a1a6936ac7f2b85975ee9c Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: qrtr: Do not do DEL_SERVER broadcast after DEL_CLIENTSricharan Ramabadhran
On the remote side, when QRTR socket is removed, af_qrtr will call qrtr_port_remove() which broadcasts the DEL_CLIENT packet to all neighbours including local NS. NS upon receiving the DEL_CLIENT packet, will remove the lookups associated with the node:port and broadcasts the DEL_SERVER packet. But on the host side, due to the arrival of the DEL_CLIENT packet, the NS would've already deleted the server belonging to that port. So when the remote's NS again broadcasts the DEL_SERVER for that port, it throws below error message on the host: "failed while handling packet from 2:-2" So fix this error by not broadcasting the DEL_SERVER packet when the DEL_CLIENT packet gets processed." Fixes: 0c2204a4ad71 ("net: qrtr: Migrate nameservice to kernel from userspace") Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Ram Kumar Dharuman <quic_ramd@quicinc.com> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03Merge branch 'mt7988-support'David S. Miller
Daniel Golle says: ==================== net: dsa: add support for MT7988 The MediaTek MT7988 SoC comes with a built-in switch very similar to previous MT7530 and MT7531. However, the switch address space is mapped into the SoCs memory space rather than being connected via MDIO. Using MMIO simplifies register access and also removes the need for a bus lock, and for that reason also makes interrupt handling more light-weight. Note that this is different from previous SoCs like MT7621 and MT7623N which also came with an integrated MT7530-like switch which yet had to be accessed via MDIO. Split-off the part of the driver registering an MDIO driver, then add another module acting as MMIO/platform driver. The whole series has been tested on various MediaTek boards: * MT7623A + MT7530 (BPi-R2) * MT7986A + MT7531 (BPi-R3) * MT7988A reference board Changes since v1: * use 'internal' PHY mode where appropriate * use regmap_update_bits in mt7530_rmw * improve dt-bindings Changes since RFC v3: * WARN_ON_ONCE if register read fails * move probing of the reset GPIO and reset controller link out of common probe function, as they are not actually common Changes since RFC v2: * split into many small commits to ease review * introduce helper functions to reduce code duplication * use helpers for locking to make lock-skipping easier and less ugly to implement. * add dt-bindings for mediatek,mt7988-switch Changes since initial RFC: * use regmap for register access and move register access to bus- specific driver * move initialization of MT7531 SGMII PCS to MDIO driver ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03dt-bindings: net: dsa: mediatek,mt7530: add mediatek,mt7988-switchDaniel Golle
Add documentation for the built-in switch which can be found in the MediaTek MT7988 SoC. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: dsa: mt7530: introduce driver for MT7988 built-in switchDaniel Golle
Add driver for the built-in Gigabit Ethernet switch which can be found in the MediaTek MT7988 SoC. The switch shares most of its design with MT7530 and MT7531, but has it's registers mapped into the SoCs register space rather than being connected externally or internally via MDIO. Introduce a new platform driver to support that. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: dsa: mt7530: skip locking if MDIO bus isn't presentDaniel Golle
As MT7530 and MT7531 internally use 32-bit wide registers, each access to any register of the switch requires several operations on the MDIO bus. Hence if there is congruent access, e.g. due to PCS or PHY polling, this can mess up and interfere with another ongoing register access sequence. However, the MDIO bus mutex is only relevant for MDIO-connected switches. Prepare switches which have there registers directly mapped into the SoCs register space via MMIO which do not require such locking. There we can simply use regmap's default locking mechanism. Hence guard mutex operations to only be performed in case of MDIO connected switches. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: dsa: mt7530: introduce separate MDIO driverDaniel Golle
Split MT7530 switch driver into a common part and a part specific for MDIO connected switches and multi-chip modules. Move MDIO-specific functions to newly introduced mt7530-mdio.c while keeping the common parts in mt7530.c. Introduce new Kconfig symbol CONFIG_NET_DSA_MT7530_MDIO which is implied by CONFIG_NET_DSA_MT7530. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: dsa: mt7530: split-off common parts from mt7531_setupDaniel Golle
MT7988 shares a significant part of the setup function with MT7531. Split-off those parts into a shared function which is going to be used also by mt7988_setup. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: dsa: mt7530: introduce mt7530_remove_common helper functionDaniel Golle
Move commonly used parts from mt7530_remove into new mt7530_remove_common helper function which will be used by both, mt7530_remove and the to-be-introduced mt7988_remove. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: dsa: mt7530: introduce mt7530_probe_common helper functionDaniel Golle
Move commonly used parts from mt7530_probe into new mt7530_probe_common helper function which will be used by both, mt7530_probe and the to-be-introduced mt7988_probe. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: dsa: mt7530: move p5_intf_modes() function to mt7530.cDaniel Golle
In preparation of splitting mt7530.c into a driver for MDIO-connected as well as MDIO-accessed built-in switches on one hand and MMIO-accessed built-in switches move the p5_inft_modes() function from mt7530.h to mt7530.c. The function is only needed there and will trigger a compiler warning about a defined but unused function otherwise when including mt7530.h in the to-be-introduced bus-specific drivers. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: dsa: mt7530: introduce mutex helpersDaniel Golle
As the MDIO bus lock only needs to be involved if actually operating on an MDIO-connected switch we will need to skip locking for built-in switches which are accessed via MMIO. Create helper functions which simplify that upcoming change. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: dsa: mt7530: move SGMII PCS creation to mt7530_probe functionDaniel Golle
Move creating the SGMII PCS from mt753x_setup() to the more appropriate mt7530_probe() function. This is done also in preparation of moving all functions related to MDIO-connected MT753x switches to a separate module. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: dsa: mt7530: use regmap to access switch register spaceDaniel Golle
Use regmap API to access the switch register space. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: dsa: mt7530: use unlocked regmap accessorsDaniel Golle
Instead of wrapping the locked register accessor functions, use the unlocked variants and add locking wrapper functions to let regmap handle the locking. This is a preparation towards being able to always use regmap to access switch registers instead of open-coded accessor functions. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: dsa: mt7530: refactor SGMII PCS creationDaniel Golle
Instead of macro templates use a dedidated function and allocated regmap_config when creating the regmaps for the pcs-mtk-lynxi instances. This is in preparation to switching to use unlocked regmap accessors and have regmap's locking API handle locking for us. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: dsa: mt7530: make some noise if register read failsDaniel Golle
Simply returning the negative error value instead of the read value doesn't seem like a good idea. Return 0 instead and add WARN_ON_ONCE(1) so this kind of error will not go unnoticed. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03Merge branch 'phy-smsc-edpd-tunable'David S. Miller
Heiner Kallweit says: ==================== net: phy: smsc: add support for edpd tunable This adds support for the EDPD PHY tunable. Per default EDPD is disabled in interrupt mode, the tunable can be used to override this, e.g. if the link partner doesn't use EDPD. The interval to check for energy can be chosen between 1000ms and 2000ms. Note that this value consists of the 1000ms phylib interval for state machine runs plus the time to wait for energy being detected. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: phy: smsc: enable edpd tunable supportHeiner Kallweit
Enable EDPD PHY tunable support for all drivers using lan87xx_read_status. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: phy: smsc: add support for edpd tunableHeiner Kallweit
This adds support for the EDPD PHY tunable. Per default EDPD is disabled in interrupt mode, the tunable can be used to override this, e.g. if the link partner doesn't use EDPD. The interval to check for energy can be chosen between 1000ms and 2000ms. Note that this value consists of the 1000ms phylib interval for state machine runs plus the time to wait for energy being detected. v2: - consider that phylib core holds phydev->lock when calling the phy tunable hooks Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: phy: smsc: prepare for making edpd wait period configurableHeiner Kallweit
Add a member edpd_max_wait_ms to the private data structure in preparation of making the wait period configurable by supporting the edpd phy tunable. v2: - rename constant to EDPD_MAX_WAIT_DFLT_MS Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: phy: smsc: add flag edpd_mode_set_by_userHeiner Kallweit
Add flag edpd_mode_set_by_user in preparation of adding edpd phy tunable support. This flag will allow users to override the default behavior of edpd being disabled if interrupt mode is used. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: phy: smsc: clear edpd_enable if interrupt mode is usedHeiner Kallweit
Clear edpd_enable if interupt mode is used, this avoids having to check for PHY_POLL multiple times. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: phy: smsc: add helper smsc_phy_config_edpdHeiner Kallweit
Add helper smsc_phy_config_edpd() and explicitly clear bit MII_LAN83C185_EDPWRDOWN is edpd_enable isn't set. Boot loader may have left whatever value. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: phy: smsc: rename flag energy_enableHeiner Kallweit
Rename the flag to edpd_enable, as we're not enabling energy but edpd (energy detect power down) mode. In addition change the type to a bit field member in preparation of adding further flags. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-18 02:24:38 +0000