summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-03-27Merge tag 'kvm-riscv-fixes-6.3-1' of https://github.com/kvm-riscv/linux into ↵Paolo Bonzini
HEAD KVM/riscv fixes for 6.3, take #1 - Fix VM hang in case of timer delta being zero
2023-03-27Merge tag 'kvmarm-fixes-6.3-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.3, part #2 Fixes for a rather interesting set of bugs relating to the MMU: - Read the MMU notifier seq before dropping the mmap lock to guard against reading a potentially stale VMA - Disable interrupts when walking user page tables to protect against the page table being freed - Read the MTE permissions for the VMA within the mmap lock critical section, avoiding the use of a potentally stale VMA pointer Additionally, some fixes targeting the vPMU: - Return the sum of the current perf event value and PMC snapshot for reads from userspace - Don't save the value of guest writes to PMCR_EL0.{C,P}, which could otherwise lead to userspace erroneously resetting the vPMU during VM save/restore
2023-03-27platform/x86: gigabyte-wmi: add support for B650 AORUS ELITE AXThomas Weißschuh
This has been reported as working. Suggested-by: got3nks <got3nks@users.noreply.github.com> Link: https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/15#issuecomment-1483942966 Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20230327-gigabyte-wmi-b650-elite-ax-v1-1-d4d645c21d0b@weissschuh.net Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-03-27can: bcm: bcm_tx_setup(): fix KMSAN uninit-value in vfs_writeIvan Orlov
Syzkaller reported the following issue: ===================================================== BUG: KMSAN: uninit-value in aio_rw_done fs/aio.c:1520 [inline] BUG: KMSAN: uninit-value in aio_write+0x899/0x950 fs/aio.c:1600 aio_rw_done fs/aio.c:1520 [inline] aio_write+0x899/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook mm/slab.h:766 [inline] slab_alloc_node mm/slub.c:3452 [inline] __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491 __do_kmalloc_node mm/slab_common.c:967 [inline] __kmalloc+0x11d/0x3b0 mm/slab_common.c:981 kmalloc_array include/linux/slab.h:636 [inline] bcm_tx_setup+0x80e/0x29d0 net/can/bcm.c:930 bcm_sendmsg+0x3a2/0xce0 net/can/bcm.c:1351 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] sock_write_iter+0x495/0x5e0 net/socket.c:1108 call_write_iter include/linux/fs.h:2189 [inline] aio_write+0x63a/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 1 PID: 5034 Comm: syz-executor350 Not tainted 6.2.0-rc6-syzkaller-80422-geda666ff2276 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 ===================================================== We can follow the call chain and find that 'bcm_tx_setup' function calls 'memcpy_from_msg' to copy some content to the newly allocated frame of 'op->frames'. After that the 'len' field of copied structure being compared with some constant value (64 or 8). However, if 'memcpy_from_msg' returns an error, we will compare some uninitialized memory. This triggers 'uninit-value' issue. This patch will add 'memcpy_from_msg' possible errors processing to avoid uninit-value issue. Tested via syzkaller Reported-by: syzbot+c9bfd85eca611ebf5db1@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=47f897f8ad958bbde5790ebf389b5e7e0a345089 Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Fixes: 6f3b911d5f29b ("can: bcm: add support for CAN FD frames") Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230314120445.12407-1-ivan.orlov0322@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-03-27platform/x86/intel/pmc: Alder Lake PCH slp_s0_residency fixRajvi Jingar
For platforms with Alder Lake PCH (Alder Lake S and Raptor Lake S) the slp_s0_residency attribute has been reporting the wrong value. Unlike other platforms, ADL PCH does not have a counter for the time that the SLP_S0 signal was asserted. Instead, firmware uses the aggregate of the Low Power Mode (LPM) substate counters as the S0ix value. Since the LPM counters run at a different frequency, this lead to misreporting of the S0ix time. Add a check for Alder Lake PCH and adjust the frequency accordingly when display slp_s0_residency. Fixes: bbab31101f44 ("platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver") Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230320212029.3154407-1-david.e.box@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-03-27drm/i915/perf: Drop wakeref on GuC RC errorChris Wilson
If we fail to adjust the GuC run-control on opening the perf stream, make sure we unwind the wakeref just taken. v2: Retain old goto label names (Ashutosh) v3: Drop bitfield boolean Fixes: 01e742746785 ("drm/i915/guc: Support OA when Wa_16011777198 is enabled") Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-2-umesh.nerlige.ramappa@intel.com (cherry picked from commit 2810ac6c753d17ee2572ffb57fe2382a786a080a) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915/dpt: Treat the DPT BO as a framebufferVille Syrjälä
Currently i915_gem_object_is_framebuffer() doesn't treat the BO containing the framebuffer's DPT as a framebuffer itself. This means eg. that the shrinker can evict the DPT BO while leaving the actual FB BO bound, when the DPT is allocated from regular shmem. That causes an immediate oops during hibernate as we try to rewrite the PTEs inside the already evicted DPT obj. TODO: presumably this might also be the reason for the DPT related display faults under heavy memory pressure, but I'm still not sure how that would happen as the object should be pinned by intel_dpt_pin() while in active use by the display engine... Cc: stable@vger.kernel.org Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Imre Deak <imre.deak@intel.com> Fixes: 0dc987b699ce ("drm/i915/display: Add smem fallback allocation for dpt") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-2-ville.syrjala@linux.intel.com Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> (cherry picked from commit 779cb5ba64ec7df80675a956c9022929514f517a) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915/gem: Flush lmem contents after constructionChris Wilson
i915_gem_object_create_lmem_from_data() lacks the flush of the data written to lmem to ensure the object is marked as dirty and the writes flushed to the backing store. Once created, we can immediately release the obj->mm.mapping caching of the vmap. Fixes: 7acbbc7cf485 ("drm/i915/guc: put all guc objects in lmem when available") Cc: Matthew Auld <matthew.auld@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.16+ Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316165918.13074-1-nirmoy.das@intel.com (cherry picked from commit e2ee10474ce766686e7a7496585cdfaf79e3a1bf) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915/tc: Fix the ICL PHY ownership check in TC-cold stateImre Deak
The commit renaming icl_tc_phy_is_in_safe_mode() to icl_tc_phy_take_ownership() didn't flip the function's return value accordingly, fix this up. This didn't cause an actual problem besides state check errors, since the function is only used during HW readout. Cc: José Roberto de Souza <jose.souza@intel.com> Fixes: f53979d68a77 ("drm/i915/display/tc: Rename safe_mode functions ownership") Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316131724.359612-4-imre.deak@intel.com (cherry picked from commit f2c7959dda614d9b7c6a41510492de39d31705ec) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915: Disable DC states for all commitsVille Syrjälä
Keeping DC states enabled is incompatible with the _noarm()/_arm() split we use for writing pipe/plane registers. When DC5 and PSR are enabled, all pipe/plane registers effectively become self-arming on account of DC5 exit arming the update, and PSR exit latching it. What probably saves us most of the time is that (with PIPE_MISC[21]=0) all pipe register writes themselves trigger PSR exit, and then we don't re-enter PSR until the idle frame count has elapsed. So it may be that the PSR exit happens already before we've updated the state too much. Also the PSR1 panel (at least on this KBL) seems to discard the first frame we trasmit, presumably still scanning out from its internal framebuffer at that point. So only the second frame we transmit is actually visible. But I suppose that could also be panel specific behaviour. I haven't checked out how other PSR panels behave, nor did I bother to check what the eDP spec has to say about this. And since this really is all about DC states, let's switch from the MODESET domain to the DC_OFF domain. Functionally they are 100% identical. We should probably remove the MODESET domain... And for good measure let's toss in an assert to the place where we do the _noarm() register writes to make sure DC states are in fact off. v2: Just use intel_display_power_is_enabled() (Imre) Cc: <stable@vger.kernel.org> #v5.17+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair") Fixes: f8a005eb8972 ("drm/i915: Optimize icl+ universal plane programming") Fixes: 890b6ec4a522 ("drm/i915: Split skl+ plane update into noarm+arm pair") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320183532.17727-1-ville.syrjala@linux.intel.com (cherry picked from commit 41b4c7fe72b6105a4b49395eea9aa40cef94288d) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915: Workaround ICL CSC_MODE sticky armingVille Syrjälä
Unlike SKL/GLK the ICL CSC unit suffers from a new issue where CSC_MODE arming is sticky. That is, once armed it remains armed causing the CSC coeff/offset registers to become effectively self-arming. CSC coeff/offset registers writes no longer disarm the CSC, but fortunately register read still do. So we can use that to disarm the CSC unit once the registers for the current frame have been latched. This avoid s the self-arming behaviour from persisting into the next frame's .color_commit_noarm() call. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-5-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit 92736f1b452bbb8a66bdb5b1d263ad00e04dd3b8) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915: Add a .color_post_update() hookVille Syrjälä
We're going to need stuff after the color management register latching has happened. Add a corresponding hook. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-4-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit 3962ca4e080a525fc9eae87aa6b2286f1fae351d) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915: Move CSC load back into .color_commit_arm() when PSR is enabled on ↵Ville Syrjälä
skl/glk SKL/GLK CSC unit suffers from a nasty issue where a CSC coeff/offset register read or write between DC5 exit and PSR exit will undo the CSC arming performed by DMC, and then during PSR exit the hardware will latch zeroes into the active CSC registers. This causes any plane going through the CSC to output all black. We can sidestep the issue by making sure the PSR exit has already actually happened before we touch the CSC coeff/offset registers. Easiest way to guarantee that is to just move the CSC programming back into the .color_commir_arm() as we force a PSR exit (and crucially wait for it to actually happen) prior to touching the arming registers. When PSR (and thus also DC states) are disabled we don't have anything to worry about, so we can keep using the more optional _noarm() hook for writing the CSC registers. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8283 Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-3-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit 80a892a4c2428b65366721599fc5fe50eaed35fd) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915: Split icl_color_commit_noarm() from skl_color_commit_noarm()Ville Syrjälä
We're going to want different behavior for skl/glk vs. icl in .color_commit_noarm(), so split the hook into two. Arguably we already had slightly different behaviour since csc_enable/gamma_enable are never set on icl+, so the old code was perhaps a bit confusing as well. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-2-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit f161eb01f50ab31f2084975b43bce54b7b671e17) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915/pmu: Use functions common with sysfs to read actual freqAshutosh Dixit
Expose intel_rps_read_actual_frequency_fw to read the actual freq without taking forcewake for use by PMU. The code is refactored to use a common set of functions across sysfs and PMU. Using common functions with sysfs in PMU solves the issues of missing support for MTL and missing support for older generations (prior to Gen6). It also future proofs the PMU where sometimes code has been updated for sysfs and PMU has been missed. v2: Remove runtime_pm_if_in_use from read_actual_frequency_fw (Tvrtko) v3: (Tvrtko) - Remove goto in __read_cagf - Unexport intel_rps_get_cagf and intel_rps_read_punit_req Fixes: 22009b6dad66 ("drm/i915/mtl: Modify CAGF functions for MTL") Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8280 Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316004800.2539753-1-ashutosh.dixit@intel.com (cherry picked from commit 44df42e66139b5fac8db49ee354be279210f9816) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27net: stmmac: don't reject VLANs when IFF_PROMISC is setVladimir Oltean
The blamed commit has introduced the following tests to dwmac4_add_hw_vlan_rx_fltr(), called from stmmac_vlan_rx_add_vid(): if (hw->promisc) { netdev_err(dev, "Adding VLAN in promisc mode not supported\n"); return -EPERM; } "VLAN promiscuous" mode is keyed in this driver to IFF_PROMISC, and so, vlan_vid_add() and vlan_vid_del() calls cannot take place in IFF_PROMISC mode. I have the following 2 arguments that this restriction is.... hm, how shall I put it nicely... unproductive :) First, take the case of a Linux bridge. If the kernel is compiled with CONFIG_BRIDGE_VLAN_FILTERING=y, then this bridge shall have a VLAN database. The bridge shall try to call vlan_add_vid() on its bridge ports for each VLAN in the VLAN table. It will do this irrespectively of whether that port is *currently* VLAN-aware or not. So it will do this even when the bridge was created with vlan_filtering 0. But the Linux bridge, in VLAN-unaware mode, configures its ports in promiscuous (IFF_PROMISC) mode, so that they accept packets with any MAC DA (a switch must do this in order to forward those packets which are not directly targeted to its MAC address). As a result, the stmmac driver does not work as a bridge port, when the kernel is compiled with CONFIG_BRIDGE_VLAN_FILTERING=y. $ ip link add br0 type bridge && ip link set br0 up $ ip link set eth0 master br0 && ip link set eth0 up [ 2333.943296] br0: port 1(eth0) entered blocking state [ 2333.943381] br0: port 1(eth0) entered disabled state [ 2333.943782] device eth0 entered promiscuous mode [ 2333.944080] 4033c000.ethernet eth0: Adding VLAN in promisc mode not supported [ 2333.976509] 4033c000.ethernet eth0: failed to initialize vlan filtering on this port RTNETLINK answers: Operation not permitted Secondly, take the case of stmmac as DSA master. Some switch tagging protocols are based on 802.1Q VLANs (tag_sja1105.c), and as such, tag_8021q.c uses vlan_vid_add() to work with VLAN-filtering DSA masters. But also, when a DSA port becomes promiscuous (for example when it joins a bridge), the DSA framework also makes the DSA master promiscuous. Moreover, for every VLAN that a DSA switch sends to the CPU, DSA also programs a VLAN filter on the DSA master, because if the the DSA switch uses a tail tag, then the hardware frame parser of the DSA master will see VLAN as VLAN, and might filter them out, for being unknown. Due to the above 2 reasons, my belief is that the stmmac driver does not get to choose to not accept vlan_vid_add() calls while IFF_PROMISC is enabled, because the 2 are completely independent and there are code paths in the network stack which directly lead to this situation occurring, without the user's direct input. In fact, my belief is that "VLAN promiscuous" mode should have never been keyed on IFF_PROMISC in the first place, but rather, on the NETIF_F_HW_VLAN_CTAG_FILTER feature flag which can be toggled by the user through ethtool -k, when present in netdev->hw_features. In the stmmac driver, NETIF_F_HW_VLAN_CTAG_FILTER is only present in "features", making this feature "on [fixed]". I have this belief because I am unaware of any definition of promiscuity which implies having an effect on anything other than MAC DA (therefore not VLAN). However, I seem to be rather alone in having this opinion, looking back at the disagreements from this discussion: https://lore.kernel.org/netdev/20201110153958.ci5ekor3o2ekg3ky@ipetronik.com/ In any case, to remove the vlan_vid_add() dependency on !IFF_PROMISC, one would need to remove the check and see what fails. I guess the test was there because of the way in which dwmac4_vlan_promisc_enable() is implemented. For context, the dwmac4 supports Perfect Filtering for a limited number of VLANs - dwmac4_get_num_vlan(), priv->hw->num_vlan, with a fallback on Hash Filtering - priv->dma_cap.vlhash - see stmmac_vlan_update(), also visible in cat /sys/kernel/debug/stmmaceth/eth0/dma_cap | grep 'VLAN Hash Filtering'. The perfect filtering is based on MAC_VLAN_Tag_Filter/MAC_VLAN_Tag_Data registers, accessed in the driver through dwmac4_write_vlan_filter(). The hash filtering is based on the MAC_VLAN_Hash_Table register, named GMAC_VLAN_HASH_TABLE in the driver and accessed by dwmac4_update_vlan_hash(). The control bit for enabling hash filtering is GMAC_VLAN_VTHM (MAC_VLAN_Tag_Ctrl bit VTHM: VLAN Tag Hash Table Match Enable). Now, the description of dwmac4_vlan_promisc_enable() is that it iterates through the driver's cache of perfect filter entries (hw->vlan_filter[i], added by dwmac4_add_hw_vlan_rx_fltr()), and evicts them from hardware by unsetting their GMAC_VLAN_TAG_DATA_VEN (MAC_VLAN_Tag_Data bit VEN - VLAN Tag Enable) bit. Then it unsets the GMAC_VLAN_VTHM bit, which disables hash matching. This leaves the MAC, according to table "VLAN Match Status" from the documentation, to always enter these data paths: VID |VLAN Perfect Filter |VTHM Bit |VLAN Hash Filter |Final VLAN Match |Match Result | |Match Result |Status -------|--------------------|---------|-----------------|---------------- VID!=0 |Fail |0 |don't care |Pass So, dwmac4_vlan_promisc_enable() does its job, but by unsetting GMAC_VLAN_VTHM, it conflicts with the other code path which controls this bit: dwmac4_update_vlan_hash(), called through stmmac_update_vlan_hash() from stmmac_vlan_rx_add_vid() and from stmmac_vlan_rx_kill_vid(). This is, I guess, why dwmac4_add_hw_vlan_rx_fltr() is not allowed to run after dwmac4_vlan_promisc_enable() has unset GMAC_VLAN_VTHM: because if it did, then dwmac4_update_vlan_hash() would set GMAC_VLAN_VTHM again, breaking the "VLAN promiscuity". It turns out that dwmac4_vlan_promisc_enable() is way too complicated for what needs to be done. The MAC_Packet_Filter register also has the VTFE bit (VLAN Tag Filter Enable), which simply controls whether VLAN tagged packets which don't match the filtering tables (either perfect or hash) are dropped or not. At the moment, this driver unconditionally sets GMAC_PACKET_FILTER_VTFE if NETIF_F_HW_VLAN_CTAG_FILTER was detected through the priv->dma_cap.vlhash capability bits of the device, in stmmac_dvr_probe(). I would suggest deleting the unnecessarily complex logic from dwmac4_vlan_promisc_enable(), and simply unsetting GMAC_PACKET_FILTER_VTFE when becoming IFF_PROMISC, which has the same effect of allowing packets with any VLAN tags, but has the additional benefit of being able to run concurrently with stmmac_vlan_rx_add_vid() and stmmac_vlan_rx_kill_vid(). As much as I believe that the VTFE bit should have been exclusively controlled by NETIF_F_HW_VLAN_CTAG_FILTER through ethtool, and not by IFF_PROMISC, changing that is not a punctual fix to the problem, and it would probably break the VFFQ feature added by the later commit e0f9956a3862 ("net: stmmac: Add option for VLAN filter fail queue enable"). From the commit description, VFFQ needs IFF_PROMISC=on and VTFE=off in order to work (and this change respects that). But if VTFE was changed to be controlled through ethtool -k, then a user-visible change would have been introduced in Intel's scripts (a need to run "ethtool -k eth0 rx-vlan-filter off" which did not exist before). The patch was tested with this set of commands: ip link set eth0 up ip link add link eth0 name eth0.100 type vlan id 100 ip addr add 192.168.100.2/24 dev eth0.100 && ip link set eth0.100 up ip link set eth0 promisc on ip link add link eth0 name eth0.101 type vlan id 101 ip addr add 192.168.101.2/24 dev eth0.101 && ip link set eth0.101 up ip link set eth0 promisc off ping -c 5 192.168.100.1 ping -c 5 192.168.101.1 ip link set eth0 promisc on ping -c 5 192.168.100.1 ping -c 5 192.168.101.1 ip link del eth0.100 ip link del eth0.101 # Wait for VLAN-tagged pings from the other end... # Check with "tcpdump -i eth0 -e -n -p" and we should see them ip link set eth0 promisc off # Wait for VLAN-tagged pings from the other end... # Check with "tcpdump -i eth0 -e -n -p" and we shouldn't see them # anymore, but remove the "-p" argument from tcpdump and they're there. Fixes: c89f44ff10fd ("net: stmmac: Add support for VLAN promiscuous mode") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27can: j1939: prevent deadlock by moving j1939_sk_errqueue()Oleksij Rempel
This commit addresses a deadlock situation that can occur in certain scenarios, such as when running data TP/ETP transfer and subscribing to the error queue while receiving a net down event. The deadlock involves locks in the following order: 3 j1939_session_list_lock -> active_session_list_lock j1939_session_activate ... j1939_sk_queue_activate_next -> sk_session_queue_lock ... j1939_xtp_rx_eoma_one 2 j1939_sk_queue_drop_all -> sk_session_queue_lock ... j1939_sk_netdev_event_netdown -> j1939_socks_lock j1939_netdev_notify 1 j1939_sk_errqueue -> j1939_socks_lock __j1939_session_cancel -> active_session_list_lock j1939_tp_rxtimer CPU0 CPU1 ---- ---- lock(&priv->active_session_list_lock); lock(&jsk->sk_session_queue_lock); lock(&priv->active_session_list_lock); lock(&priv->j1939_socks_lock); The solution implemented in this commit is to move the j1939_sk_errqueue() call out of the active_session_list_lock context, thus preventing the deadlock situation. Reported-by: syzbot+ee1cd780f69483a8616b@syzkaller.appspotmail.com Fixes: 5b9272e93f2e ("can: j1939: extend UAPI to notify about RX status") Co-developed-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20230324130141.2132787-1-o.rempel@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-03-27dev_ioctl: fix a W=1 warningHeiner Kallweit
This fixes the following warning when compiled with GCC 12.2.0 and W=1. net/core/dev_ioctl.c:475: warning: Function parameter or member 'data' not described in 'dev_ioctl' Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: phy: bcm7xxx: use devm_clk_get_optional_enabled to simplify the codeHeiner Kallweit
Use devm_clk_get_optional_enabled to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27tools: ynl: default to treating enums as flags for mask generationJakub Kicinski
I was a bit too optimistic in commit bf51d27704c9 ("tools: ynl: fix get_mask utility routine"), not every mask we use is necessarily coming from an enum of type "flags". We also allow flipping an enum into flags on per-attribute basis. That's done by the 'enum-as-flags' property of an attribute. Restore this functionality, it's not currently used by any in-tree family. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27selftests: tls: add a test for queuing data before setting the ULPJakub Kicinski
Other tests set up the connection fully on both ends before communicating any data. Add a test which will queue up TLS records to TCP before the TLS ULP is installed. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27tools: ynl: Add missing types to encode/decodeMichal Michalik
While testing the tool I noticed we miss the u16 type on payload create. On the code inspection it turned out we miss also u64 - add them. We also miss the decoding of u16 despite the fact `NlAttr` class supports it - add it. Signed-off-by: Michal Michalik <michal.michalik@intel.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27Merge branch 'sunhme-cleanups'David S. Miller
Sean Anderson says: ==================== net: sunhme: Probe/IRQ cleanups Well, I've had these patches kicking around in my tree since last October, so I guess I had better get around to posting them. This series is mainly a cleanup/consolidation of the probe process, with some interrupt changes as well. Some of these changes are SBUS- (AKA SPARC-) specific, so this should really get some testing there as well to ensure nothing breaks. I've CC'd a few SPARC mailing lists in hopes that someone there can try this out. I also have an SBUS card I ordered by mistake if anyone has a SPARC computer but lacks this card. Changes in v4: - Tweak variable order for yuletide - Move uninitialized return to its own commit - Use correct SBUS/PCI accessors - Rework hme_version to set the default in pci/sbus_probe and override it (if necessary) in common_probe Changes in v3: - Incorperate a fix from another series into this commit Changes in v2: - Move happy_meal_begin_auto_negotiation earlier and remove forward declaration - Make some more includes common - Clean up mac address init - Inline error returns ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sunhme: Consolidate common probe tasksSean Anderson
Most of the second half of the PCI/SBUS probe functions are the same. Consolidate them into a common function. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sunhme: Inline error returnsSean Anderson
The err_out label used to have cleanup. Now that it just returns, inline it everywhere. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sunhme: Clean up mac address initSean Anderson
Clean up some oddities suggested during review. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sunhme: Consolidate mac address initializationSean Anderson
The mac address initialization is braodly the same between PCI and SBUS, and one was clearly copied from the other. Consolidate them. We still have to have some ifdefs because pci_(un)map_rom is only implemented for PCI, and idprom is only implemented for SPARC. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sunhme: Switch SBUS to devresSean Anderson
The PCI half of this driver was converted in commit 914d9b2711dd ("sunhme: switch to devres"). Do the same for the SBUS half. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sunhme: Alphabetize includesSean Anderson
Alphabetize includes to make it clearer where to add new ones. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sunhme: Unify IRQ requestingSean Anderson
Instead of registering one interrupt handler for all four SBUS Quattro HMEs, let each HME register its own handler. To make this work, we don't handle the IRQ if none of the status bits are set. This reduces the complexity of the driver, and makes it easier to ensure things happen before/after enabling IRQs. I'm not really sure why we request IRQs in two different places (and leave them running after removing the driver!). A lot of things in this driver seem to just be crusty, and not necessarily intentional. I'm assuming that's the case here as well. This really needs to be tested by someone with an SBUS Quattro card. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sunhme: Remove residual polling codeSean Anderson
The sunhme driver never used the hardware MII polling feature. Even the if-def'd out happy_meal_poll_start was removed by 2002 [1]. Remove the various places in the driver which needlessly guard against MII interrupts which will never be enabled. [1] https://lwn.net/2002/0411/a/2.5.8-pre3.php3 Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sunhme: Just restart autonegotiation if we can't bring the link upSean Anderson
If we've tried regular autonegotiation and forcing the link mode, just restart autonegotiation instead of reinitializing the whole NIC. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sunhme: Fix uninitialized return codeSean Anderson
Fix an uninitialized return code if we never found a qfe slot. It would be a bug if we ever got into this situation, but it's good to return something tracable. Fixes: acb3f35f920b ("sunhme: forward the error code from pci_enable_device()") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27Merge branch 'octeon_ep-deferred-probe-and-mailbox'David S. Miller
Veerasenareddy Burru says: ==================== octeon_ep: deferred probe and mailbox Implement Deferred probe, mailbox enhancements and heartbeat monitor. v4 -> v5: - addressed review comments https://lore.kernel.org/all/20230323104703.GD36557@unreal/ replaced atomic_inc() + atomic_read() with atomic_inc_return(). v3 -> v4: - addressed review comments on v3 https://lore.kernel.org/all/20230214051422.13705-1-vburru@marvell.com/ - 0004-xxx.patch v3 is split into 0004-xxx.patch and 0005-xxx.patch in v4. - API changes to accept function ID are moved to 0005-xxx.patch. - fixed rct violations. - reverted newly added changes that do not yet have use cases. v2 -> v3: - removed SRIOV VF support changes from v2, as new drivers which use ndo_get_vf_xxx() and ndo_set_vf_xxx() are not accepted. https://lore.kernel.org/all/20221207200204.6819575a@kernel.org/ Will implement VF representors and submit again. - 0007-xxx.patch and 0008-xxx.patch from v2 are removed and 0009-xxx.patch in v2 is now 0007-xxx.patch in v3. - accordingly, changed title for cover letter. v1 -> v2: - remove separate workqueue task to wait for firmware ready. instead defer probe when firmware is not ready. Reported-by: Leon Romanovsky <leon@kernel.org> - This change has resulted in update of 0001-xxx.patch and all other patches in the patchset. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: add heartbeat monitorVeerasenareddy Burru
Monitor periodic heartbeat messages from device firmware. Presence of heartbeat indicates the device is active and running. If the heartbeat is missed for configured interval indicates firmware has crashed and device is unusable; in this case, PF driver stops and uninitialize the device. Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: function id in link info and stats mailbox commandsVeerasenareddy Burru
Update control mailbox API to include function id in get stats and link info. Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: support asynchronous notificationsVeerasenareddy Burru
Add asynchronous notification support to the control mailbox. Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: include function id in mailbox commandsVeerasenareddy Burru
Extend control command structure to include vfid and update APIs to accept VF ID. Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: add separate mailbox command and response queuesVeerasenareddy Burru
Enhance control mailbox protocol to support following - separate command and response queues * command queue to send control commands to firmware. * response queue to receive responses and notifications from firmware. - variable size messages using scatter/gather Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: control mailbox for multiple PFsVeerasenareddy Burru
Add control mailbox support for multiple PFs. Update control mbox base address calculation based on PF function link. Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: poll for control messagesVeerasenareddy Burru
Poll for control messages until interrupts are enabled. All the interrupts are enabled in ndo_open(). Add ability to listen for notifications from firmware before ndo_open(). Once interrupts are enabled, this polling is disabled and all the messages are processed by bottom half of interrupt handler. Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: defer probe if firmware not readyVeerasenareddy Burru
Defer probe if firmware is not ready for device usage. Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: Satananda Burla <sburla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: dsa: b53: mmap: add phy opsÁlvaro Fernández Rojas
Implement phy_read16() and phy_write16() ops for B53 MMAP to avoid accessing B53_PORT_MII_PAGE registers which hangs the device. This access should be done through the MDIO Mux bus controller. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27Merge branch 'bcm53134-support'David S. Miller
Álvaro Fernández Rojas says: ==================== net: dsa: b53: mdio: add support for BCM53134 This is based on the initial work from Paul Geurts that was sent to the incorrect linux development lists and recipients. I've modified it by removing BCM53134_DEVICE_ID from is531x5() and therefore adding is53134() where needed. I also added a separate RGMII handling block for is53134() since according to Paul, BCM53134 doesn't support RGMII_CTRL_TIMING_SEL as opposed to is531x5(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: dsa: b53: mdio: add support for BCM53134Paul Geurts
Add support for the BCM53134 Ethernet switch in the existing b53 dsa driver. BCM53134 is very similar to the BCM58XX series. Signed-off-by: Paul Geurts <paul.geurts@prodrive-technologies.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27dt-bindings: net: dsa: b53: add BCM53134 supportÁlvaro Fernández Rojas
BCM53134 are B53 switches connected by MDIO. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: phy: micrel: correct KSZ9131RNX EEE capabilities and advertisementOleksij Rempel
The KSZ9131RNX incorrectly shows EEE capabilities in its registers. Although the "EEE control and capability 1" (Register 3.20) is set to 0, indicating no EEE support, the "EEE advertisement 1" (Register 7.60) is set to 0x6, advertising EEE support for 1000BaseT/Full and 100BaseT/Full. This inconsistency causes PHYlib to assume there is no EEE support, preventing control over EEE advertisement, which is enabled by default. This patch resolves the issue by utilizing the ksz9477_get_features() function to correctly set the EEE capabilities for the KSZ9131RNX. This adjustment allows proper control over EEE advertisement and ensures accurate representation of the device's capabilities. Fixes: 8b68710a3121 ("net: phy: start using genphy_c45_ethtool_get/set_eee()") Reported-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27vsock/loopback: use only sk_buff_head.lock to protect the packet queueStefano Garzarella
pkt_list_lock was used before commit 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") to protect the packet queue. After that commit we switched to sk_buff and we are using sk_buff_head.lock in almost every place to protect the packet queue except in vsock_loopback_work() when we call skb_queue_splice_init(). As reported by syzbot, this caused unlocked concurrent access to the packet queue between vsock_loopback_work() and vsock_loopback_cancel_pkt() since it is not holding pkt_list_lock. With the introduction of sk_buff_head, pkt_list_lock is redundant and can cause confusion, so let's remove it and use sk_buff_head.lock everywhere to protect the packet queue access. Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Cc: bobby.eshleman@bytedance.com Reported-and-tested-by: syzbot+befff0a9536049e7902e@syzkaller.appspotmail.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Bobby Eshleman <bobby.eshleman@bytedance.com> Reviewed-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27Merge branch 'constify-sfp-phy-nodes'David S. Miller
Russell King says: ==================== Constify a few sfp/phy fwnodes This series constifies a bunch of fwnode_handle pointers that are only used to refer to but not modify the contents of the fwnode structures. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: phy: constify fwnode_get_phy_node() fwnode argumentRussell King (Oracle)
fwnode_get_phy_node() does not motify the fwnode structure, so make the argument const, Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-22 04:21:04 +0000