summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-18GFS2: Fix error path in gfs2_lookup_by_inum()Steven Whitehouse
In the (impossible, except if there is fs corruption) error path in gfs2_lookup_by_inum() if the call to gfs2_inode_refresh() fails, it was leaving the function by calling iput() rather than iget_failed(). This would cause future lookups of the same inode to block forever. This patch fixes the problem by moving the call to gfs2_inode_refresh() into gfs2_inode_lookup() where iget_failed() is part of the error path already. Also this cleans up some unreachable code and makes gfs2_set_iop() static. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-01-18GFS2: remove iopen glocks from cache on failed deletesBenjamin Marzinski
When a file gets deleted on GFS2, if a node can't get an exclusive lock on the file's iopen glock, it punts on actually freeing up the space, because another node is using the file. When it does this, it needs to drop the iopen glock from its cache so that the other node can get an exclusive lock on it. Now, gfs2_delete_inode() sets GL_NOCACHE before dropping the shared lock on the iopen glock in preparation for grabbing it in the exclusive state. Since the node needs the glock in the exclusive state, dropping the shared lock from the cache doesn't slow down the case where no other nodes are using the file. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-01-18ALSA: ice1712 delta - initialize SPI clockBrian Bloniarz
The driver was using an initial value for the clock on the SPI bus which was read from ICE1712 EEPROM, ice->eeprom.data[ICE_EEP1_GPIO_STATE] & ICE1712_DELTA_AP_CCLK (0x02) It appears some cards have it default high, some cards have it default low. On my Delta 66 rev. E: $ cat /proc/asound/M66/ice1712 | grep 'GPIO state' GPIO state : 0x70 /* ICE1712_DELTA_AP_CCLK bit is zero */ On my Audiophile 2496: $ cat /proc/asound/M2496/ice1712 | grep 'GPIO state' GPIO state : 0xfe /* ICE1712_DELTA_AP_CCLK bit is one */ It must be raised before the first SPI write happens, or the write will fail, leading to: [ 23.248721] invalid CS8427 signature 0x0: let me try again... I theorize that 4eb4550ab37d351ab0973ccec921a5a2d8560ec7 is no longer needed, it was a different way to workaround the problem. [fixed variable decleration by tiwai] Signed-off-by: Brian Bloniarz <brian.bloniarz@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-18perf: Fix contexted inheritancePeter Zijlstra
Linus reported that the RCU lockdep annotation bits triggered for this rcu_dereference() because we're not holding rcu_read_lock(). Going over the code I cannot convince myself its correct: - holding a ref on the parent_ctx, doesn't avoid it being uncloned concurrently (as the comment says), so we can race with a free. - holding parent_ctx->mutex doesn't avoid the above free from taking place either, it would at best avoid parent_ctx from being freed. I.e. the warning is correct. To fix the bug, serialize against the unclone_ctx() call by extending the reach of the parent_ctx->lock. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18sched: Fix signed unsigned comparison in check_preempt_tick()Mike Galbraith
Signed unsigned comparison may lead to superfluous resched if leftmost is right of the current task, wasting a few cycles, and inadvertently _lengthening_ the current task's slice. Reported-by: Venkatesh Pallipadi <venki@google.com> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294202477.9384.5.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18sched: Replace rq->bkl_count with rq->rq_sched_info.bkl_countYong Zhang
Now rq->rq_sched_info.bkl_count is not used for rq, scroll rq->bkl_count into it. Thus we can save some space for rq. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294991859-13246-1-git-send-email-yong.zhang0@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18sched, autogroup: Fix CONFIG_RT_GROUP_SCHED sched_setscheduler() failureMike Galbraith
If CONFIG_RT_GROUP_SCHED is set, __sched_setscheduler() fails due to autogroup not allocating rt_runtime. Free unused/unusable rt_se and rt_rq, redirect RT tasks to the root task group, and tell __sched_setscheduler() that it's ok. Reported-and-tested-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294890890.8089.39.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18sched: Display autogroup names in /proc/sched_debugBharata B Rao
Add autogroup name to cfs_rq and tasks information to /proc/sched_debug. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20110111101257.GF4772@in.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18sched: Reinstate group names in /proc/sched_debugBharata B Rao
Displaying of group names in /proc/sched_debug was dropped in autogroup patches. Add group names while displaying cfs_rq and tasks information. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20110111101153.GE4772@in.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18sched: Update effective_load() to use global share weightsPaul Turner
Previously effective_load would approximate the global load weight present on a group taking advantage of: entity_weight = tg->shares ( lw / global_lw ), where entity_weight was provided by tg_shares_up. This worked (approximately) for an 'empty' (at tg level) cpu since we would place boost load representative of what a newly woken task would receive. However, now that load is instantaneously updated this assumption is no longer true and the load calculation is rather incorrect in this case. Fix this (and improve the general case) by re-writing effective_load to take advantage of the new shares distribution code. Signed-off-by: Paul Turner <pjt@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20110115015817.069769529@google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18x86: Clear irqstack thread_infoBrian Gerst
Mathias Merz reported that v2.6.37 failed to boot on his system. Make sure that the thread_info part of the irqstack is initialized to zeroes. Reported-and-Tested-by: Matthias Merz <linux@merz-ka.de> Signed-off-by: Brian Gerst <brgerst@gmail.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <AANLkTimyKXfJ1x8tgwrr1hYnNLrPfgE1NTe4z7L6tUDm@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18Merge branch 'fix/asoc' into for-linusTakashi Iwai
2011-01-18ARM: mach-shmobile: sh73a0 CPGA fix for IrDA MSTPMagnus Damm
Fix a typo for the sh73a0 CPGA code dealing with the IrDA hardware block on the AG5EVM board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: sh73a0 CPGA fix for FRQCRA M3Magnus Damm
Fix the M3 field offset for the FRQCRA register in the sh73a0 CPGA. It should be 12, not 8. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18drm/i915: set more FBC chicken bitsJesse Barnes
Add a couple of missing workaround bits for ILK & SNB. These disable clock gating on a couple of units that would otherwise prevent FBC from working. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-18x86: Make relocatable kernel work with new binutilsShaohua Li
The CONFIG_RELOCATABLE=y option is broken with new binutils, which will make boot panic. According to Lu Hongjiu, the affected binutils are from 2.20.51.0.12 to 2.21.51.0.3, which are release since Oct 22 this year. At least ubuntu 10.10 is using such binutils. See: http://sourceware.org/bugzilla/show_bug.cgi?id=12327 The reason of the boot panic is that we have 'jiffies = jiffies_64;' in vmlinux.lds.S. The jiffies isn't in any section. In kernel build, there is warning saying jiffies is an absolute address and can't be relocatable. At runtime, jiffies will have virtual address 0. Signed-off-by: Shaohua Li<shaohua.li@intel.com> Cc: Lu Hongjiu<hongjiu.lu@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1295312269.1949.725.camel@sli10-conroe> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18Merge branch 'fix/hda' into for-linusTakashi Iwai
2011-01-18ALSA: hda - Fix initialization for HP 2011 notebooksVitaliy Kulikov
Fixes for HP 2011 notebooks: enable dock ports and disable BTL initialization in the driver. Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-18ALSA: hda - Add support for VMware controllerBankim Bhavsar
Add the new PCI ID 0x15ad and device ID 0x1977 for VMware HDAudio Controller. [changed to use AZX_DRIVER_GENERIC by tiwai] Signed-off-by: Bankim Bhavsar <bbhavsar@vmware.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-18ALSA: hda - consitify string arraysTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-18ALSA: hda - Add add multi-streaming playback for AD1988Raymond Yau
Attached a patch which add a new model to support multi-streaming playback for ad1988. playback another stereo stream through the front panel headphone on device 2 while playback through the speakers connected to rear panel on device 0 at the same time. Tested with ad1988a rev2 codec on asus P5B-V motherboard. Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-18autofs4: clean ->d_release() and autofs4_free_ino() upAl Viro
The latter is called only when both ino and dentry are about to be freed, so cleaning ->d_fsdata and ->dentry is pointless. Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: split autofs4_init_ino()Al Viro
split init_ino into new_ino and clean_ino; the former is what used to be init_ino(NULL, sbi), the latter is for cases where we passed non-NULL ino. Lose unused arguments. Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: mkdir and symlink always get a dentry that had passed lookupAl Viro
... so ->d_fsdata will have been set up before we get there Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: autofs4_get_inode() doesn't need autofs_info * argument anymoreAl Viro
Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: kill ->size in autofs_infoAl Viro
It's used only to pass the length of symlink body to autofs4_get_inode() in autofs4_dir_symlink(). We can bloody well set inode->i_size in autofs4_dir_symlink() directly and be done with that. Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: pass mode to autofs4_get_inode() explicitlyAl Viro
In all cases we'd set inf->mode to know value just before passing it to autofs4_get_inode(). That kills the need to store it in autofs_info and pass it to autofs_init_ino() Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: autofs4_mkroot() is not different from autofs4_init_ino()Al Viro
Kill it. Mind you, it's been an obfuscated call of autofs4_init_ino() ever since 2.3.99pre6-4... Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4: keep symlink body in inode->i_privateAl Viro
gets rid of all ->free()/->u.symlink machinery in autofs; we simply keep symlink bodies in inode->i_private and free them in ->evict_inode(). Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4 - fix debug print in autofs4_lookup()Ian Kent
oz_mode isn't defined any more, use autofs4_oz_mode(sbi) instead. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18vfs - fix dentry ref count in do_lookup()Ian Kent
There is a ref count problem in fs/namei.c:do_lookup(). When walking in ref-walk mode, if follow_managed() returns a fail we need to drop dentry and possibly vfsmount. Clean up properly, as we do in the other caller of follow_managed(). Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18autofs4 - fix get_next_positive_dentry()Ian Kent
The initialization condition in fs/autofs4/expire.c:get_next_positive_dentry() appears to be incorrect. If prev == NULL I believe that root should be returned. Further down, at the current dentry check for it being simple_positive() it looks like the d_lock for dentry p should be dropped instead of dentry ret, otherwise when p is assinged to ret we end up with no lock on p and a lost lock on ret, which leads to a deadlock. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18ARM: S5PV310: Add missing virtual ASoC DMA deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-18ARM: S5PV210: Add missing virtual ASoC DMA deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-18ARM: S5P6450: Add missing virtual ASoC DMA deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-18ARM: S5P6440: Add missing virtual ASoC DMA deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-18ARM: S5P6442: Enable I2S device to work on SMDK6442Jassi Brar
Add missing virtual ASoC DMA device. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [kgene.kim@samsung.com: minor changed title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-18sh: fix MSIOF0 SPI on ecovec: it conflicts with VOUGuennadi Liakhovetski
MSIOF0 and VOU share pins on sh7724, make MSIOF0 available again, as long as VOU is not configured. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: remove sh7367 on-chip set_irq_type()Magnus Damm
set_irq_type() should only be used for external IRQ pins, so update the G3EVM board code to remove low level request. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: sh7372 INTCS MFIS2 interrupt updateMagnus Damm
Enable the MFIS2 interrupt source in the INTCS interrupt controller included in the sh7372 processor. The priority field is constantly enabled to let the interrupt through to both the ARM side and the SH side. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: ag5evm: Add IrDA supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-17Input: ct82710c - return proper error code for ct82c710_openDavidlohr Bueso
If request_irq() fails we should return the proper error instead of -1. Signed-off-by: Davidlohr Bueso <dave@gnu.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-17Input: bu21013_ts - added regulator supportNaveen Kumar Gaddipati
Add regulator support in ROHM BU21013 touch panel driver. Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-17Input: bu21013_ts - remove duplicate resolution parametersNaveen Kumar Gaddipati
Remove duplicate display resolution parameters from platform data as one pair is quite enough. Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-17Input: tnetv107x-ts - don't treat NULL clk as an errorJamie Iles
We should use IS_ERR() when checking whether clk_get() succeeded or not since it returns errors by encoding error codes with ERR_PTR(). Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-17Input: tnetv107x-keypad - don't treat NULL clk as an errorJamie Iles
We should use IS_ERR() when checking whether clk_get() succeeded or not since it returns errors by encoding error codes with ERR_PTR(). Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-18ARM: mach-shmobile: clock-sh7372: fixup pllc2 set_rateKuninori Morimoto
This patch fixup 421b446abeec55bed1251fab80cb5c12be58b773 - Care clk->rate - Don't over write PLLC2 enable bit Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18video: pxa3xx-gcu: Return -EFAULT when copy_from_user() failsaxel lin
Return -EFAULT instead of number of bytes that could not be copied if copy_from_user() fails. Also fix a typo in the comments. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18video: nuc900fb: properly free resources in nuc900fb_removeAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18video: nuc900fb: fix compile errorAxel Lin
This patch fixes below compile error: CC drivers/video/nuc900fb.o drivers/video/nuc900fb.c: In function 'nuc900fb_suspend': drivers/video/nuc900fb.c:726: error: too few arguments to function 'nuc900fb_stop_lcd' drivers/video/nuc900fb.c: In function 'nuc900fb_resume': drivers/video/nuc900fb.c:743: error: 'bfinfo' undeclared (first use in this function) drivers/video/nuc900fb.c:743: error: (Each undeclared identifier is reported only once drivers/video/nuc900fb.c:743: error: for each function it appears in.) make[2]: *** [drivers/video/nuc900fb.o] Error 1 make[1]: *** [drivers/video] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit (git 2.34.1) at 2025-09-19 07:54:25 +0000