| Age | Commit message (Collapse) | Author |
|---|
|
Use mvhhi instead of sth to write a zero to spinlocks. Compared to the
sth variant this avoids the load of zero to a register, and reduces
register pressure.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Both instructions in arch_spin_unlock() do not clobber the condition
code. Therefore remove the condition code clobber from the inline assembly.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Improve readability and use symbolic names.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Select HAVE_PREEMPT_DYNAMIC_KEY and add the pieces which are required to
support PREEMPT_DYNAMIC.
See commit 99cf983cc8bc ("sched/preempt: Add PREEMPT_DYNAMIC using static
keys") and commit 1b2d3451ee50 ("arm64: Support PREEMPT_DYNAMIC") for more
details.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
In commit 6ee600bfbe0f ("s390/pci: remove hotplug slot when releasing the
device") the zpci_exit_slot() was moved from zpci_device_reserved() to
zpci_release_device() with the intention of keeping the hotplug slot
around until the device is actually removed.
Now zpci_release_device() is only called once all references are
dropped. Since the zPCI subsystem only drops its reference once the
device is in the reserved state it follows that zpci_release_device()
must only deal with devices in the reserved state. Despite that it
contains code to tear down from both configured and standby state. For
the standby case this already includes the removal of the hotplug slot
so would cause a double removal if a device was ever removed in
either configured or standby state.
Instead of causing a potential double removal in a case that should
never happen explicitly WARN_ON() if a device in non-reserved state is
released and get rid of the dead code cases.
Fixes: 6ee600bfbe0f ("s390/pci: remove hotplug slot when releasing the device")
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Tested-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Prior to commit 0467cdde8c43 ("s390/pci: Sort PCI functions prior to
creating virtual busses") the IOMMU was initialized and the device was
registered as part of zpci_create_device() with the struct zpci_dev
freed if either resulted in an error. With that commit this was moved
into a separate function called zpci_add_device().
While this new function logs when adding failed, it expects the caller
not to use and to free the struct zpci_dev on error. This difference
between it and zpci_create_device() was missed while changing the
callers and the incompletely initialized struct zpci_dev may get used in
zpci_scan_configured_device in the error path. This then leads to
a crash due to the device not being registered with the zbus. It was
also not freed in this case. Fix this by handling the error return of
zpci_add_device(). Since in this case the zdev was not added to the
zpci_list it can simply be discarded and freed. Also make this more
explicit by moving the kref_init() into zpci_add_device() and document
that zpci_zdev_get()/zpci_zdev_put() must be used after adding.
Cc: stable@vger.kernel.org
Fixes: 0467cdde8c43 ("s390/pci: Sort PCI functions prior to creating virtual busses")
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add missing includes to fix this randconfig compile error:
All errors (new ones prefixed by >>):
In file included from mm/pagewalk.c:5:
In file included from include/linux/hugetlb.h:798:
>> arch/s390/include/asm/hugetlb.h:94:31: error: call to undeclared function 'is_pte_marker'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
94 | return huge_pte_none(pte) || is_pte_marker(pte);
| ^
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411281002.IPkRpIcR-lkp@intel.com/
Fixes: 487ef5d4d912 ("s390/mm: Add PTE_MARKER support for hugetlbfs mappings")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Commit 8a13897fb0daa ("mm: userfaultfd: support UFFDIO_POISON for
hugetlbfs") added support for PTE_MARKER_POISONED for hugetlbfs, but
PTE_MARKER also needs support for swap entries. For s390, swap entries
were only supported on PTE level, not on the PMD/PUD levels that are used
for large hugetlbfs mappings.
Therefore, when writing a PTE_MARKER_POISONED entry, the resulting entry
on PMD/PUD level would be an invalid / empty entry. Further access would
then generate a pagefault loop, instead of the expected SIGBUS. It is a
loop inside the kernel, but interruptible and uffd fault handling also
calls schedule() in between, so at least it won't completely block the
system.
Previous commits prepared support for swap entries on PMD/PUD levels.
PTE_MARKER support for hugetlbfs can now be enabled by simply adding an
extra is_pte_marker() check to huge_pte_none_mostly(). Fault handling
code also needs to be adjusted to expect the VM_FAULT_HWPOISON_LARGE
fault flag, which was not possible on s390 before.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Introduce region-third (PUD) and segment table (PMD) swap entries, and
make hugetlbfs RSTE <-> PTE conversion code aware of them, so that they
can be used for hugetlbfs PTE_MARKER entries. Future work could also
build on this to enable THP_SWAP and THP_MIGRATION for s390.
Similar to PTE swap entries, bits 0-51 can be used to store the swap
offset, but bits 57-61 cannot be used for swap type because that overlaps
with the INVALID and TABLE TYPE bits. PMD/PUD swap entries must be invalid,
and have a correct table type so that pud_folded() check still works.
Bits 53-57 can be used for swap type, but those include the PROTECT bit.
So unlike swap PTEs, the PROTECT bit cannot be used to mark the swap entry.
Use the "Common-Segment/Region" bit 59 instead for that.
Also remove the !MACHINE_HAS_NX check in __set_huge_pte_at(). Otherwise,
that would clear the _SEGMENT_ENTRY_NOEXEC bit also for swap entries, where
it is used for encoding the swap type. The architecture only requires this
bit to be 0 for PTEs, with !MACHINE_HAS_NX, not for segment or region-third
entries. And the check is also redundant, because after __pte_to_rste()
conversion, for non-swap PTEs it would only be set if it was already set in
the PTE, which should never be the case for !MACHINE_HAS_NX.
This is a prerequisite for hugetlbfs PTE_MARKER support on s390, which
is needed to fix a regression introduced with commit 8a13897fb0da
("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs"). That commit
depends on the availability of swap entries for hugetlbfs, which were
not available for s390 so far.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Introduce region-third and segment table entry present SW bits, and adjust
pmd/pud_present() accordingly.
Also add pmd/pud_present() checks to pmd/pud_leaf(), to return false for
future swap entries. Same logic applies to pmd_trans_huge(), make that
return pmd_leaf() instead of duplicating the same check.
huge_pte_offset() also needs to be adjusted, current code would return
NULL for !pud_present(). Use the same logic as in the generic version,
which allows for !pud_present() swap entries.
Similar to PTE, bit 63 can be used for the new SW present bit in region
and segment table entries. For segment-table entries (PMD) the architecture
says that "Bits 62-63 are available for programming", so they are safe to
use. The same is true for large leaf region-third-table entries (PUD).
However, for non-leaf region-third-table entries, bits 62-63 indicate the
TABLE LENGTH and both must be set to 1. But such entries would always be
considered as present, so it is safe to use bit 63 as PRESENT bit for PUD.
They also should not conflict with bit 62 potentially later used for
preserving SOFT_DIRTY in swap entries, because they are not swap entries.
Valid PMDs / PUDs should always have the present bit set, so add it to
the various pgprot defines, and also _SEGMENT_ENTRY which is OR'ed e.g.
in pmd_populate(). _REGION3_ENTRY wouldn't need any change, as the present
bit is already included in the TABLE LENGTH, but also explicitly add it
there, for completeness, and just in case the bit would ever be changed.
gmap code needs some adjustment, to also OR the _SEGMENT_ENTRY, like it
is already done gmap_shadow_pgt() when creating new PMDs, but not in
__gmap_link(). Otherwise, the gmap PMDs would not be considered present,
e.g. when using pmd_leaf() checks in gmap code. The various WARN_ON
checks in gmap code also need adjustment, to tolerate the new present
bit.
This is a prerequisite for hugetlbfs PTE_MARKER support on s390, which
is needed to fix a regression introduced with commit 8a13897fb0da
("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs"). That commit
depends on the availability of swap entries for hugetlbfs, which were
not available for s390 so far.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Rearrange region-third and segment table entry SW bits, in order to
make room for future encoding of region/segment table swap entries.
Also adjust _SEGMENT_ENTRY_GMAP_UC and _SEGMENT_ENTRY_GMAP_IN bits in
gmap code. Those should only apply for gmap PMDs, and not really depend
on or conflict with host PMD bits, but for consistency also adjust them:
- _SEGMENT_ENTRY_GMAP_UC "dirty (migration)" was using the same bit as
_SEGMENT_ENTRY_SOFT_DIRTY in the host PMD -> make it use the new
SOFT_DIRTY bit 63 (0x0002)
- _SEGMENT_ENTRY_GMAP_IN "invalidation notify bit" was using 0x8000,
which was an unused bit in the host PMD, that is now used for
_SEGMENT_ENTRY_WRITE -> make it use bit 52 (0x0800) instead, which is
still unused in the host PMD
This is a prerequisite for hugetlbfs PTE_MARKER support on s390, which
is needed to fix a regression introduced with commit 8a13897fb0da
("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs"). That commit
depends on the availability of swap entries for hugetlbfs, which were
not available for s390 so far.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
kvm_s390_update_topology_change_report() modifies a single bit within
sca_utility using cmpxchg(). Given that the size of the sca_utility union
is two bytes this generates very inefficient code. Change the size to four
bytes, so better code can be generated.
Even though the size of sca_utility doesn't reflect architecture anymore
this seems to be the easiest and most pragmatic approach to avoid
inefficient code.
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241126102515.3178914-4-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Within sca_clear_ext_call() cmpxchg() is used to clear one or two bytes
(depending on sca format). The cmpxchg() calls are not supposed to fail; if
so that would be a bug. Given that cmpxchg() usage on one and two byte
areas generates very inefficient code, replace them with block concurrent
WRITE_ONCE() calls, and remove the WARN_ON().
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241126102515.3178914-3-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Convert all cmpxchg() loops to try_cmpxchg() loops. With gcc 14 and the
usage of flag output operands in try_cmpxchg() this allows the compiler to
generate slightly better code.
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241126102515.3178914-2-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The result of xchg() is not used, and in addition it is used on a one byte
memory area which leads to inefficient code.
Use WRITE_ONCE() instead to achieve the same result with much less
generated code.
Acked-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Commit c98d2ecae08f ("s390/mm: Uncouple physical vs virtual address
spaces") introduced a large_allowed() helper that restricts which mapping
modes can use large pages. This change unintentionally prevented KASAN
shadow mappings from using large pages, despite there being no reason
to avoid them. In fact, large pages are preferred for performance.
Add POPULATE_KASAN_MAP_SHADOW to the allowed list in large_allowed()
to restore large page mappings for KASAN shadows.
While large_allowed() isn't strictly necessary with current mapping
modes since disallowed modes either don't map anything or fail alignment
and size checks, keep it for clarity.
Fixes: c98d2ecae08f ("s390/mm: Uncouple physical vs virtual address spaces")
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Just add the required TIF bit for ARCH_HAS_PREEMPT_LAZY support.
Shuffle TIF bits to get TIF_NEED_RESCHED_LAZY next to TIF_NEED_RESCHED.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add missing _TIF defines so that for every TIF bit its corresponding
_TIF mask exists. Sort the _TIF list to match the TIF order.
Also remove two leftover comments from the pre generic entry time.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The stack depot filters out everything outside of the top interrupt
context as an uninteresting or irrelevant part of the stack traces. This
helps with stack trace de-duplication, avoiding an explosion of saved
stack traces that share the same IRQ context code path but originate
from different randomly interrupted points, eventually exhausting the
stack depot.
Filtering uses in_irqentry_text() to identify functions within the
.irqentry.text and .softirqentry.text sections, which then become the
last stack trace entries being saved.
While __do_softirq() is placed into the .softirqentry.text section by
common code, populating .irqentry.text is architecture-specific.
Currently, the .irqentry.text section on s390 is empty, which prevents
stack depot filtering and de-duplication and could result in warnings
like:
Stack depot reached limit capacity
WARNING: CPU: 0 PID: 286113 at lib/stackdepot.c:252 depot_alloc_stack+0x39a/0x3c8
with PREEMPT and KASAN enabled.
Fix this by moving the IO/EXT interrupt handlers from .kprobes.text into
the .irqentry.text section and updating the kprobes blacklist to include
the .irqentry.text section.
This is done only for asynchronous interrupts and explicitly not for
program checks, which are synchronous and where the context beyond the
program check is important to preserve. Despite machine checks being
somewhat in between, they are extremely rare, and preserving context
when possible is also of value.
SVCs and Restart Interrupts are not relevant, one being always at the
boundary to user space and the other being a one-time thing.
IRQ entries filtering is also optionally used in ftrace function graph,
where the same logic applies.
Cc: stable@vger.kernel.org # 5.15+
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Free_sampling_buffer() releases the Sampling Data Buffers (SDBs)
and Sampling Data Buffer Table (SDBTs) allocated at event
initialization. Both buffers are of PAGE_SIZE bytes. Each SDBT
consists of 512 entries. The first 511 entries point to SDBs
the last entry points to a successor SDBT. The last SDBT in
the list points to the origin of all SDBTs. SDBTs do not
contain holes, that is an entry always points to a SDB.
If less than 511 SDBs have been allocation, the last entry
points to the origin SDBT.
Simplify the release of the SDBs and SDBTs, walk along the
SDBT chain, release SDBs and SDBTs and stop when reaching
the origin again.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
If the page has been exported, do not re-import it. Imports should
only be triggered by the guest. The guest will import the page
automatically when it will need it again, there is no advantage in
importing it manually.
Moreover, vfio_pin_pages() will take an extra reference on the page and
thus will cause the import to always fail. The extra reference would be
dropped only after pointlessly trying to import the page.
Fixes: f88fb1335733 ("s390/vfio-ap: make sure nib is shared")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20241115135611.87836-1-imbrenda@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
arch_stack_walk_user_common() contains a return statement instead of a
break statement in case store_ip() fails while trying to store a callchain
entry of a user space process.
This may lead to a missing pagefault_enable() call.
If this happens any subsequent page fault of the process won't be resolved
by the page fault handler and this in turn will lead to the process being
killed.
Use a break instead of a return statement to fix this.
Fixes: ebd912ff9919 ("s390/stacktrace: Merge perf_callchain_user() and arch_stack_walk_user()")
Cc: stable@vger.kernel.org
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since commit b3e5dc45fd1e ("s390/mm: fix local TLB flushing vs.
detach of an mm address space") __tlb_flush_mm() does not flush
local CPU, but the comment suggests it does, which is misleading.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The s390dbf format handler rely on being passed an output buffer sized
such that their output will always fit and then use plain sprintf() to
write to it. While only supplied data from other kernel components this
still potentially allows buffer overwrite if callers are not careful.
Instead just pass in the size of the output buffer and use scnprintf()
instead of sprintf() and strscpy() instead of strcpy(). The latter also
allows us to get rid of a separate strlen() call.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core facilities:
- Add the "Lazy preemption" model (CONFIG_PREEMPT_LAZY=y), which
optimizes fair-class preemption by delaying preemption requests to
the tick boundary, while working as full preemption for
RR/FIFO/DEADLINE classes. (Peter Zijlstra)
- x86: Enable Lazy preemption (Peter Zijlstra)
- riscv: Enable Lazy preemption (Jisheng Zhang)
- Initialize idle tasks only once (Thomas Gleixner)
- sched/ext: Remove sched_fork() hack (Thomas Gleixner)
Fair scheduler:
- Optimize the PLACE_LAG when se->vlag is zero (Huang Shijie)
Idle loop:
- Optimize the generic idle loop by removing unnecessary memory
barrier (Zhongqiu Han)
RSEQ:
- Improve cache locality of RSEQ concurrency IDs for intermittent
workloads (Mathieu Desnoyers)
Waitqueues:
- Make wake_up_{bit,var} less fragile (Neil Brown)
PSI:
- Pass enqueue/dequeue flags to psi callbacks directly (Johannes
Weiner)
Preparatory patches for proxy execution:
- Add move_queued_task_locked helper (Connor O'Brien)
- Consolidate pick_*_task to task_is_pushable helper (Connor O'Brien)
- Split out __schedule() deactivate task logic into a helper (John
Stultz)
- Split scheduler and execution contexts (Peter Zijlstra)
- Make mutex::wait_lock irq safe (Juri Lelli)
- Expose __mutex_owner() (Juri Lelli)
- Remove wakeups from under mutex::wait_lock (Peter Zijlstra)
Misc fixes and cleanups:
- Remove unused __HAVE_THREAD_FUNCTIONS hook support (David
Disseldorp)
- Update the comment for TIF_NEED_RESCHED_LAZY (Sebastian Andrzej
Siewior)
- Remove unused bit_wait_io_timeout (Dr. David Alan Gilbert)
- remove the DOUBLE_TICK feature (Huang Shijie)
- fix the comment for PREEMPT_SHORT (Huang Shijie)
- Fix unnused variable warning (Christian Loehle)
- No PREEMPT_RT=y for all{yes,mod}config"
* tag 'sched-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
sched, x86: Update the comment for TIF_NEED_RESCHED_LAZY.
sched: No PREEMPT_RT=y for all{yes,mod}config
riscv: add PREEMPT_LAZY support
sched, x86: Enable Lazy preemption
sched: Enable PREEMPT_DYNAMIC for PREEMPT_RT
sched: Add Lazy preemption model
sched: Add TIF_NEED_RESCHED_LAZY infrastructure
sched/ext: Remove sched_fork() hack
sched: Initialize idle tasks only once
sched: psi: pass enqueue/dequeue flags to psi callbacks directly
sched/uclamp: Fix unnused variable warning
sched: Split scheduler and execution contexts
sched: Split out __schedule() deactivate task logic into a helper
sched: Consolidate pick_*_task to task_is_pushable helper
sched: Add move_queued_task_locked helper
locking/mutex: Expose __mutex_owner()
locking/mutex: Make mutex::wait_lock irq safe
locking/mutex: Remove wakeups from under mutex::wait_lock
sched: Improve cache locality of RSEQ concurrency IDs for intermittent workloads
sched: idle: Optimize the generic idle loop by removing needless memory barrier
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Uprobes:
- Add BPF session support (Jiri Olsa)
- Switch to RCU Tasks Trace flavor for better performance (Andrii
Nakryiko)
- Massively increase uretprobe SMP scalability by SRCU-protecting
the uretprobe lifetime (Andrii Nakryiko)
- Kill xol_area->slot_count (Oleg Nesterov)
Core facilities:
- Implement targeted high-frequency profiling by adding the ability
for an event to "pause" or "resume" AUX area tracing (Adrian
Hunter)
VM profiling/sampling:
- Correct perf sampling with guest VMs (Colton Lewis)
New hardware support:
- x86/intel: Add PMU support for Intel ArrowLake-H CPUs (Dapeng Mi)
Misc fixes and enhancements:
- x86/intel/pt: Fix buffer full but size is 0 case (Adrian Hunter)
- x86/amd: Warn only on new bits set (Breno Leitao)
- x86/amd/uncore: Avoid a false positive warning about snprintf
truncation in amd_uncore_umc_ctx_init (Jean Delvare)
- uprobes: Re-order struct uprobe_task to save some space
(Christophe JAILLET)
- x86/rapl: Move the pmu allocation out of CPU hotplug (Kan Liang)
- x86/rapl: Clean up cpumask and hotplug (Kan Liang)
- uprobes: Deuglify xol_get_insn_slot/xol_free_insn_slot paths (Oleg
Nesterov)"
* tag 'perf-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
perf/core: Correct perf sampling with guest VMs
perf/x86: Refactor misc flag assignments
perf/powerpc: Use perf_arch_instruction_pointer()
perf/core: Hoist perf_instruction_pointer() and perf_misc_flags()
perf/arm: Drop unused functions
uprobes: Re-order struct uprobe_task to save some space
perf/x86/amd/uncore: Avoid a false positive warning about snprintf truncation in amd_uncore_umc_ctx_init
perf/x86/intel: Do not enable large PEBS for events with aux actions or aux sampling
perf/x86/intel/pt: Add support for pause / resume
perf/core: Add aux_pause, aux_resume, aux_start_paused
perf/x86/intel/pt: Fix buffer full but size is 0 case
uprobes: SRCU-protect uretprobe lifetime (with timeout)
uprobes: allow put_uprobe() from non-sleepable softirq context
perf/x86/rapl: Clean up cpumask and hotplug
perf/x86/rapl: Move the pmu allocation out of CPU hotplug
uprobe: Add support for session consumer
uprobe: Add data pointer to consumer handlers
perf/x86/amd: Warn only on new bits set
uprobes: fold xol_take_insn_slot() into xol_get_insn_slot()
uprobes: kill xol_area->slot_count
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Detect non-relocated text references for more robust
IBT sealing (Josh Poimboeuf)
- Fix build error when building stripped down
UAPI headers (HONG Yifan)
- Exclude __tracepoints data from ENDBR checks to fix
false positives on clang builds (Peter Zijlstra)
- Fix ORC unwind for newly forked tasks (Zheng Yejian)
- Fix readelf related faddr2line regression (Carlos Llamas)
* tag 'objtool-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Exclude __tracepoints data from ENDBR checks
Revert "scripts/faddr2line: Check only two symbols when calculating symbol size"
x86/unwind/orc: Fix unwind for newly forked tasks
objtool: Also include tools/include/uapi
objtool: Detect non-relocated text references
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Lockdep:
- Enable PROVE_RAW_LOCK_NESTING with PROVE_LOCKING (Sebastian Andrzej
Siewior)
- Add lockdep_cleanup_dead_cpu() (David Woodhouse)
futexes:
- Use atomic64_inc_return() in get_inode_sequence_number() (Uros
Bizjak)
- Use atomic64_try_cmpxchg_relaxed() in get_inode_sequence_number()
(Uros Bizjak)
RT locking:
- Add sparse annotation PREEMPT_RT's locking (Sebastian Andrzej
Siewior)
spinlocks:
- Use atomic_try_cmpxchg_release() in osq_unlock() (Uros Bizjak)
atomics:
- x86: Use ALT_OUTPUT_SP() for __alternative_atomic64() (Uros Bizjak)
- x86: Use ALT_OUTPUT_SP() for __arch_{,try_}cmpxchg64_emu() (Uros
Bizjak)
KCSAN, seqlocks:
- Support seqcount_latch_t (Marco Elver)
<linux/cleanup.h>:
- Add if_not_guard() conditional guard helper (David Lechner)
- Adjust scoped_guard() macros to avoid potential warning (Przemek
Kitszel)
- Remove address space of returned pointer (Uros Bizjak)
WW mutexes:
- locking/ww_mutex: Adjust to lockdep nest_lock requirements (Thomas
Hellström)
Rust integration:
- Fix raw_spin_lock initialization on PREEMPT_RT (Eder Zulian)
Misc cleanups & fixes:
- lockdep: Fix wait-type check related warnings (Ahmed Ehab)
- lockdep: Use info level for initial info messages (Jiri Slaby)
- spinlocks: Make __raw_* lock ops static (Geert Uytterhoeven)
- pvqspinlock: Convert fields of 'enum vcpu_state' to uppercase
(Qiuxu Zhuo)
- iio: magnetometer: Fix if () scoped_guard() formatting (Stephen
Rothwell)
- rtmutex: Fix misleading comment (Peter Zijlstra)
- percpu-rw-semaphores: Fix grammar in percpu-rw-semaphore.rst (Xiu
Jianfeng)"
* tag 'locking-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
locking/Documentation: Fix grammar in percpu-rw-semaphore.rst
iio: magnetometer: fix if () scoped_guard() formatting
rust: helpers: Avoid raw_spin_lock initialization for PREEMPT_RT
kcsan, seqlock: Fix incorrect assumption in read_seqbegin()
seqlock, treewide: Switch to non-raw seqcount_latch interface
kcsan, seqlock: Support seqcount_latch_t
time/sched_clock: Broaden sched_clock()'s instrumentation coverage
time/sched_clock: Swap update_clock_read_data() latch writes
locking/atomic/x86: Use ALT_OUTPUT_SP() for __arch_{,try_}cmpxchg64_emu()
locking/atomic/x86: Use ALT_OUTPUT_SP() for __alternative_atomic64()
cleanup: Add conditional guard helper
cleanup: Adjust scoped_guard() macros to avoid potential warning
locking/osq_lock: Use atomic_try_cmpxchg_release() in osq_unlock()
cleanup: Remove address space of returned pointer
locking/rtmutex: Fix misleading comment
locking/rt: Annotate unlock followed by lock for sparse.
locking/rt: Add sparse annotation for RCU.
locking/rt: Remove one __cond_lock() in RT's spin_trylock_irqsave()
locking/rt: Add sparse annotation PREEMPT_RT's sleeping locks.
locking/pvqspinlock: Convert fields of 'enum vcpu_state' to uppercase
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Add a feature flag which denotes AMD CPUs supporting workload
classification with the purpose of using such hints when making
scheduling decisions
- Determine the boost enumerator for each AMD core based on its type:
efficiency or performance, in the cppc driver
- Add the type of a CPU to the topology CPU descriptor with the goal of
supporting and making decisions based on the type of the respective
core
- Add a feature flag to denote AMD cores which have heterogeneous
topology and enable SD_ASYM_PACKING for those
- Check microcode revisions before disabling PCID on Intel
- Cleanups and fixlets
* tag 'x86_cpu_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Remove redundant CONFIG_NUMA guard around numa_add_cpu()
x86/cpu: Fix FAM5_QUARK_X1000 to use X86_MATCH_VFM()
x86/cpu: Fix formatting of cpuid_bits[] in scattered.c
x86/cpufeatures: Add X86_FEATURE_AMD_WORKLOAD_CLASS feature bit
x86/amd: Use heterogeneous core topology for identifying boost numerator
x86/cpu: Add CPU type to struct cpuinfo_topology
x86/cpu: Enable SD_ASYM_PACKING for PKG domain on AMD
x86/cpufeatures: Add X86_FEATURE_AMD_HETEROGENEOUS_CORES
x86/cpufeatures: Rename X86_FEATURE_FAST_CPPC to have AMD prefix
x86/mm: Don't disable PCID when INVLPG has been fixed by microcode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Do the proper memory conversion of guest memory in order to be able
to kexec kernels in SNP guests along with other adjustments and
cleanups to that effect
- Start converting and moving functionality from the sev-guest driver
into core code with the purpose of supporting the secure TSC SNP
feature where the hypervisor cannot influence the TSC exposed to the
guest anymore
- Add a "nosnp" cmdline option in order to be able to disable SNP
support in the hypervisor and thus free-up resources which are not
going to be used
- Cleanups
[ Reminding myself about the endless TLA's again: SEV is the AMD Secure
Encrypted Virtualization - Linus ]
* tag 'x86_sev_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Cleanup vc_handle_msr()
x86/sev: Convert shared memory back to private on kexec
x86/mm: Refactor __set_clr_pte_enc()
x86/boot: Skip video memory access in the decompressor for SEV-ES/SNP
virt: sev-guest: Carve out SNP message context structure
virt: sev-guest: Reduce the scope of SNP command mutex
virt: sev-guest: Consolidate SNP guest messaging parameters to a struct
x86/sev: Cache the secrets page address
x86/sev: Handle failures from snp_init()
virt: sev-guest: Use AES GCM crypto library
x86/virt: Provide "nosnp" boot option for sev kernel command line
x86/virt: Move SEV-specific parsing into arch/x86/virt/svm
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform cleanup from Borislav Petkov:
- Replace deprecated PCI functions used in intel-mid
* tag 'x86_platform_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/intel-mid: Replace deprecated PCI functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loader update from Borislav Petkov:
- Remove the unconditional cache writeback and invalidation after
loading the microcode patch on Intel as this was addressing a
microcode bug for which there is a concrete microcode revision check
instead
* tag 'x86_microcode_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/intel: Remove unnecessary cache writeback and invalidation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache resource control updates from Borislav Petkov:
- Add support for 6-node sub-NUMA clustering on Intel
- Cleanup
* tag 'x86_cache_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Support Sub-NUMA cluster mode SNC6
x86/resctrl: Slightly clean-up mbm_config_show()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Log and handle twp new AMD-specific MCA registers: SYND1 and SYND2
and report the Field Replaceable Unit text info reported through them
- Add support for handling variable-sized SMCA BERT records
- Add the capability for reporting vendor-specific RAS error info
without adding vendor-specific fields to struct mce
- Cleanups
* tag 'ras_core_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
EDAC/mce_amd: Add support for FRU text in MCA
x86/mce/apei: Handle variable SMCA BERT record size
x86/MCE/AMD: Add support for new MCA_SYND{1,2} registers
tracing: Add __print_dynamic_array() helper
x86/mce: Add wrapper for struct mce to export vendor specific info
x86/mce/intel: Use MCG_BANKCNT_MASK instead of 0xff
x86/mce/mcelog: Use xchg() to get and clear the flags
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add support for Bluefield-2 SOCs to bluefield_edac
- Add support for Intel Panther Lake-H to igen6_edac
- Add polling support to igen6_edac as some Intel M100 chips have
trouble with error interrupts
- Add Kaby Lake-S support to ie31200_edac
- Fix memory source detection in the SKX common module which is used by
a couple of Intel EDAC drivers
- Add support for the NXP i.MX9 memory controller to fsl_edac
- The usual fixes and cleanups all over the place
* tag 'edac_updates_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/igen6: Add polling support
EDAC/igen6: Initialize edac_op_state according to the configuration data
EDAC/igen6: Avoid segmentation fault on module unload
EDAC/ie31200: Add Kaby Lake-S dual-core host bridge ID
MAINTAINERS: Change FSL DDR EDAC maintainership
EDAC/{skx_common,i10nm}: Fix incorrect far-memory error source indicator
EDAC/skx_common: Differentiate memory error sources
EDAC/fsl_ddr: Add support for i.MX9 DDR controller
dt-bindings: memory: fsl: Add compatible string nxp,imx9-memory-controller
EDAC/fsl_ddr: Fix bad bit shift operations
EDAC/fsl_ddr: Move global variables into struct fsl_mc_pdata
EDAC/fsl_ddr: Pass down fsl_mc_pdata in ddr_in32() and ddr_out32()
RAS/AMD/ATL: Add debug prints for DF register reads
EDAC/bluefield: Use Arm SMC for EMI access on BlueField-2
EDAC/bluefield: Fix potential integer overflow
EDAC/igen6: Add Intel Panther Lake-H SoCs support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/melver/linux
Pull Kernel Concurrency Sanitizer (KCSAN) updates from Marco Elver:
- Make KCSAN compatible with PREEMPT_RT
- Minor cleanup
* tag 'kcsan-20241112-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/melver/linux:
kcsan: Remove redundant call of kallsyms_lookup_name()
kcsan: Turn report_filterlist_lock into a raw_spinlock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Frederic Weisbecker:
"SRCU:
- Introduction of the new SRCU-lite flavour with a new pair of
srcu_read_[un]lock_lite() APIs. In practice the read side using
this flavour becomes lighter by removing a full memory barrier on
LOCK and a full memory barrier on UNLOCK. This comes at the expense
of a higher latency write side with two (in the best case of a
snaphot of unused read-sides) or more RCU grace periods on the
update side which now assumes by itself the whole full ordering
guarantee against the LOCK/UNLOCK counters on both indexes, along
with the accesses performed inside.
Uretprobes is a known potential user.
Note this doesn't replace the default normal flavour of SRCU which
still behaves the same as usual.
- Add testing of SRCU-lite through rcutorture and rcuscale
- Various cleanups on the way.
Fixes:
- Allow short-circuiting RCU-TASKS-RUDE grace periods on
architectures that have sane noinstr boundaries forbidding tracing
on low-level idle and kernel entry code. RCU-TASKS is enough on
such configurations because it involves an RCU grace period that
waits for all idle tasks to either schedule out voluntarily or
enter into RCU unwatched noinstr code.
- Allow and test start_poll_synchronize_rcu() with IRQs disabled.
- Mention rcuog kthreads in relevant documentation and Kconfig help
- Various fixes and consolidations
rcutorture:
- Add --no-affinity on tools to leave the affinity setting of guests
up to the user.
- Add guest_os_delay parameter to rcuscale for better warm-up
control.
- Fix and improve some rcuscale error handling.
- Various cleanups and fixes
stall:
- Remove dead code
- Stop dumping tasks if a stalled grace period eventually ended
midway as that only produces confusing output.
- Optimize detection of stalling CPUs and avoid useless node locking
otherwise.
NOCB:
- Fix rcu_barrier() hang due to a race against callbacks
deoffloading. This is not yet used, except by rcutorture, and waits
for its promised cpusets interface.
- Remove leftover function declaration"
* tag 'rcu.release.v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (42 commits)
rcuscale: Remove redundant WARN_ON_ONCE() splat
rcuscale: Do a proper cleanup if kfree_scale_init() fails
srcu: Unconditionally record srcu_read_lock_lite() in ->srcu_reader_flavor
srcu: Check for srcu_read_lock_lite() across all CPUs
srcu: Remove smp_mb() from srcu_read_unlock_lite()
rcutorture: Avoid printing cpu=-1 for no-fault RCU boost failure
rcuscale: Add guest_os_delay module parameter
refscale: Correct affinity check
torture: Add --no-affinity parameter to kvm.sh
rcu/nocb: Fix missed RCU barrier on deoffloading
rcu/kvfree: Fix data-race in __mod_timer / kvfree_call_rcu
rcu/srcutiny: don't return before reenabling preemption
rcu-tasks: Remove open-coded one-byte cmpxchg() emulation
doc: Remove kernel-parameters.txt entry for rcutorture.read_exit
rcutorture: Test start-poll primitives with interrupts disabled
rcu: Permit start_poll_synchronize_rcu*() with interrupts disabled
rcu: Allow short-circuiting of synchronize_rcu_tasks_rude()
doc: Add rcuog kthreads to kernel-per-CPU-kthreads.rst
rcu: Add rcuog kthreads to RCU_NOCB_CPU help text
rcu: Use the BITS_PER_LONG macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hmon updates from Guenter Roeck:
"New drivers:
- ISL28022 power monitor
- Nuvoton NCT7363Y
Added support for new chips to existing drivers:
- The tmp180 driver now supports NXP p3t1085, including its I3C mode
- The ina2xx driver now supports SY24655 and INA260
- The amc6821 driver now supports tsd,mule
Other notable improvements:
- The sht4x driver now supports the chip heater
- The pmbus/isl68137 driver now supports a voltage divider on Vout
- The cros_ec driver registers with the thermal framework
- The pmbus/ltc2978 driver now supports LTC7841
- The PMBus core now allow drivers to override WRITE_PROTECT
Various other minor improvements and cleanups"
* tag 'hwmon-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (51 commits)
hwmon: (pmbus/isl68137) add support for voltage divider on Vout
dt-bindings: hwmon: isl68137: add bindings to support voltage dividers
hwmon: tmp108: fix I3C dependency
hwmon: (cros_ec) register thermal sensors to thermal framework
hwmon: (tmp108) Add support for I3C device
hwmon: (tmp108) Add helper function tmp108_common_probe() to prepare I3C support
hwmon: (acpi_power_meter) Fix fail to load module on platform without _PMD method
hwmon: (nct6775-core) Fix overflows seen when writing limit attributes
hwmon: (pwm-fan) Introduce start from stopped state handling
dt-bindings: hwmon: pwm-fan: Document start from stopped state properties
hwmon: (tmp108) Add NXP p3t1085 support
dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string
hwmon: (sch5627, max31827) Fix typos in driver documentation
hwmon: (jc42) Drop of_match_ptr() protection
hwmon: (f71882fg) Fix grammar in fan speed trip points explanation
dt-bindings: hwmon: pmbus: add ti tps25990 support
hwmon: (pmbus/core) clear faults after setting smbalert mask
hwmon: (pmbus/core) allow drivers to override WRITE_PROTECT
hwmon: (pmbus) add documentation for existing flags
hwmon: (ina226) Add support for SY24655
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These include a couple of fixes, a new ACPI backlight quirk for Apple
MacbookPro11,2 and Air7,2 and a bunch of cleanups:
- Fix _CPC register setting issue for registers located in memory in
the ACPI CPPC library code (Lifeng Zheng)
- Use DEFINE_SIMPLE_DEV_PM_OPS in the ACPI battery driver, make it
use devm_ for initializing mutexes and allocating driver data, and
make it check the register_pm_notifier() return value (Thomas
Weißschuh, Andy Shevchenko)
- Make the ACPI EC driver support compile-time conditional and allow
ACPI to be built without CONFIG_HAS_IOPORT (Arnd Bergmann)
- Remove a redundant error check from the pfr_telemetry driver (Colin
Ian King)
- Rearrange the processor_perflib code in the ACPI processor driver
to avoid compiling x86-specific code on other architectures (Arnd
Bergmann)
- Add adev NULL check to acpi_quirk_skip_serdev_enumeration() and
make UART skip quirks work on PCI UARTs without an UID (Hans de
Goede)
- Force native backlight handling Apple MacbookPro11,2 and Air7,2 in
the ACPI video driver (Jonathan Denose)
- Switch several ACPI platform drivers back to using struct
platform_driver::remove() (Uwe Kleine-König)
- Replace strcpy() with strscpy() in multiple places in the ACPI
subsystem (Muhammad Qasim Abdul Majeed, Abdul Rahim)"
* tag 'acpi-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
ACPI: video: force native for Apple MacbookPro11,2 and Air7,2
ACPI: CPPC: Fix _CPC register setting issue
ACPI: Switch back to struct platform_driver::remove()
ACPI: x86: Add adev NULL check to acpi_quirk_skip_serdev_enumeration()
ACPI: x86: Make UART skip quirks work on PCI UARTs without an UID
ACPI: allow building without CONFIG_HAS_IOPORT
ACPI: processor_perflib: extend X86 dependency
ACPI: scan: Use strscpy() instead of strcpy()
ACPI: SBSHC: Use strscpy() instead of strcpy()
ACPI: SBS: Use strscpy() instead of strcpy()
ACPI: power: Use strscpy() instead of strcpy()
ACPI: pci_root: Use strscpy() instead of strcpy()
ACPI: pci_link: Use strscpy() instead of strcpy()
ACPI: event: Use strscpy() instead of strcpy()
ACPI: EC: Use strscpy() instead of strcpy()
ACPI: APD: Use strscpy() instead of strcpy()
ACPI: thermal: Use strscpy() instead of strcpy()
ACPI: battery: Check for error code from devm_mutex_init() call
ACPI: EC: make EC support compile-time conditional
ACPI: pfr_telemetry: remove redundant error check on ret
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These are thermal core changes, including the addition of support for
temperature thresholds that can be set from user space, fixes related
to thermal zone initialization, suspend/resume and exit, locking
rework and rearrangement of the code handling thermal zone temperature
updates.
Specifics:
- Add support for thermal thresholds that can be added and removed
from user space via netlink along with a related library update
(Daniel Lezcano)
- Fix thermal zone initialization, suspend/resume and exit
synchronization issues (Rafael Wysocki)
- Rearrange locking in the thermal core to use guards (Rafael
Wysocki)
- Make the code handling thermal zone temperature updates use sorted
lists of trip points to reduce the number of trip points table
walks in the thermal core (Rafael Wysocki)
- Fix and clean up the thermal testing facility code (Rafael Wysocki)
- Fix a Power Allocator thermal governor issue (ZhengShaobo)"
* tag 'thermal-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (45 commits)
thermal: testing: Initialize some variables annoteded with _free()
thermal: testing: Use DEFINE_FREE() and __free() to simplify code
thermal: testing: Simplify tt_get_tt_zone()
thermal: gov_power_allocator: Granted power set to max when nobody request power
thermal: core: Relocate thermal zone initialization routine
thermal: core: Use trip lists for trip crossing detection
thermal: core: Eliminate thermal_zone_trip_down()
thermal: core: Relocate functions that update trip points
thermal: core: Move some trip processing to thermal_trip_crossed()
thermal: core: Pass trip descriptor to thermal_trip_crossed()
thermal: core: Rearrange __thermal_zone_device_update()
thermal: core: Prepare for moving trips between sorted lists
thermal: core: Rename trip list node in struct thermal_trip_desc
thermal: core: Build sorted lists instead of sorting them later
thermal/lib: Fix memory leak on error in thermal_genl_auto()
thermal: thresholds: Fix thermal lock annotation issue
tools/thermal/thermal-engine: Take into account the thresholds API
tools/lib/thermal: Add the threshold netlink ABI
tools/lib/thermal: Make more generic the command encoding function
thermal: netlink: Add the commands and the events for the thresholds
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The amd-pstate cpufreq driver gets the majority of changes this time.
They are mostly fixes and cleanups, but one of them causes it to
become the default cpufreq driver on some AMD server platforms.
Apart from that, the menu cpuidle governor is modified to not use
iowait any more, the intel_idle gets a custom C-states table for
Granite Rapids Xeon D, and the intel_pstate driver will use a more
aggressive Balance- performance default EPP value on Granite Rapids
now.
There are also some fixes, cleanups and tooling updates.
Specifics:
- Update the amd-pstate driver to set the initial scaling frequency
policy lower bound to be the lowest non-linear frequency (Dhananjay
Ugwekar)
- Enable amd-pstate by default on servers starting with newer AMD
Epyc processors (Swapnil Sapkal)
- Align more codepaths between shared memory and MSR designs in
amd-pstate (Dhananjay Ugwekar)
- Clean up amd-pstate code to rename functions and remove redundant
calls (Dhananjay Ugwekar, Mario Limonciello)
- Do other assorted fixes and cleanups in amd-pstate (Dhananjay
Ugwekar and Mario Limonciello)
- Change the Balance-performance EPP value for Granite Rapids in the
intel_pstate driver to a more performance-biased one (Srinivas
Pandruvada)
- Simplify MSR read on the boot CPU in the ACPI cpufreq driver (Chang
S. Bae)
- Ensure sugov_eas_rebuild_sd() is always called when sugov_init()
succeeds to always enforce sched domains rebuild in case EAS needs
to be enabled (Christian Loehle)
- Switch cpufreq back to platform_driver::remove() (Uwe Kleine-König)
- Use proper frequency unit names in cpufreq (Marcin Juszkiewicz)
- Add a built-in idle states table for Granite Rapids Xeon D to the
intel_idle driver (Artem Bityutskiy)
- Fix some typos in comments in the cpuidle core and drivers (Shen
Lichuan)
- Remove iowait influence from the menu cpuidle governor (Christian
Loehle)
- Add min/max available performance state limits to the Energy Model
management code (Lukasz Luba)
- Update pm-graph to v5.13 (Todd Brandt)
- Add documentation for some recently introduced cpupower utility
options (Tor Vic)
- Make cpupower inform users where cpufreq-bench.conf should be
located when opening it fails (Peng Fan)
- Allow overriding cross-compiling env params in cpupower (Peng Fan)
- Add compile_commands.json to .gitignore in cpupower (John B. Wyatt
IV)
- Improve disable c_state block in cpupower bindings and add a test
to confirm that CPU state is disabled to it (John B. Wyatt IV)
- Add Chinese Simplified translation to cpupower (Kieran Moy)
- Add checks for xgettext and msgfmt to cpupower (Siddharth Menon)"
* tag 'pm-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (38 commits)
cpufreq: intel_pstate: Update Balance-performance EPP for Granite Rapids
cpufreq: ACPI: Simplify MSR read on the boot CPU
sched/cpufreq: Ensure sd is rebuilt for EAS check
intel_idle: add Granite Rapids Xeon D support
PM: EM: Add min/max available performance state limits
cpufreq/amd-pstate: Move registration after static function call update
cpufreq/amd-pstate: Push adjust_perf vfunc init into cpu_init
cpufreq/amd-pstate: Align offline flow of shared memory and MSR based systems
cpufreq/amd-pstate: Call cppc_set_epp_perf in the reenable function
cpufreq/amd-pstate: Do not attempt to clear MSR_AMD_CPPC_ENABLE
cpufreq/amd-pstate: Rename functions that enable CPPC
cpufreq/amd-pstate-ut: Add fix for min freq unit test
amd-pstate: Switch to amd-pstate by default on some Server platforms
amd-pstate: Set min_perf to nominal_perf for active mode performance gov
cpufreq/amd-pstate: Remove the redundant amd_pstate_set_driver() call
cpufreq/amd-pstate: Remove the switch case in amd_pstate_init()
cpufreq/amd-pstate: Call amd_pstate_set_driver() in amd_pstate_register_driver()
cpufreq/amd-pstate: Call amd_pstate_register() in amd_pstate_init()
cpufreq/amd-pstate: Set the initial min_freq to lowest_nonlinear_freq
cpufreq/amd-pstate: Remove the redundant verify() function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"This contains a single series from Uros to replace uses of
<linux/random.h> with prandom.h or other more specific headers
as needed, in order to avoid a circular header issue.
Uros' goal is to be able to use percpu.h from prandom.h, which
will then allow him to define __percpu in percpu.h rather than
in compiler_types.h"
* tag 'random-6.13-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: Include <linux/percpu.h> in <linux/prandom.h>
random: Do not include <linux/prandom.h> in <linux/random.h>
netem: Include <linux/prandom.h> in sch_netem.c
lib/test_scanf: Include <linux/prandom.h> instead of <linux/random.h>
lib/test_parman: Include <linux/prandom.h> instead of <linux/random.h>
bpf/tests: Include <linux/prandom.h> instead of <linux/random.h>
lib/rbtree-test: Include <linux/prandom.h> instead of <linux/random.h>
random32: Include <linux/prandom.h> instead of <linux/random.h>
kunit: string-stream-test: Include <linux/prandom.h>
lib/interval_tree_test.c: Include <linux/prandom.h> instead of <linux/random.h>
bpf: Include <linux/prandom.h> instead of <linux/random.h>
scsi: libfcoe: Include <linux/prandom.h> instead of <linux/random.h>
fscrypt: Include <linux/once.h> in fs/crypto/keyring.c
mtd: tests: Include <linux/prandom.h> instead of <linux/random.h>
media: vivid: Include <linux/prandom.h> in vivid-vid-cap.c
drm/lib: Include <linux/prandom.h> instead of <linux/random.h>
drm/i915/selftests: Include <linux/prandom.h> instead of <linux/random.h>
crypto: testmgr: Include <linux/prandom.h> instead of <linux/random.h>
x86/kaslr: Include <linux/prandom.h> instead of <linux/random.h>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add sig driver API
- Remove signing/verification from akcipher API
- Move crypto_simd_disabled_for_test to lib/crypto
- Add WARN_ON for return values from driver that indicates memory
corruption
Algorithms:
- Provide crc32-arch and crc32c-arch through Crypto API
- Optimise crc32c code size on x86
- Optimise crct10dif on arm/arm64
- Optimise p10-aes-gcm on powerpc
- Optimise aegis128 on x86
- Output full sample from test interface in jitter RNG
- Retry without padata when it fails in pcrypt
Drivers:
- Add support for Airoha EN7581 TRNG
- Add support for STM32MP25x platforms in stm32
- Enable iproc-r200 RNG driver on BCMBCA
- Add Broadcom BCM74110 RNG driver"
* tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (112 commits)
crypto: marvell/cesa - fix uninit value for struct mv_cesa_op_ctx
crypto: cavium - Fix an error handling path in cpt_ucode_load_fw()
crypto: aesni - Move back to module_init
crypto: lib/mpi - Export mpi_set_bit
crypto: aes-gcm-p10 - Use the correct bit to test for P10
hwrng: amd - remove reference to removed PPC_MAPLE config
crypto: arm/crct10dif - Implement plain NEON variant
crypto: arm/crct10dif - Macroify PMULL asm code
crypto: arm/crct10dif - Use existing mov_l macro instead of __adrl
crypto: arm64/crct10dif - Remove remaining 64x64 PMULL fallback code
crypto: arm64/crct10dif - Use faster 16x64 bit polynomial multiply
crypto: arm64/crct10dif - Remove obsolete chunking logic
crypto: bcm - add error check in the ahash_hmac_init function
crypto: caam - add error check to caam_rsa_set_priv_key_form
hwrng: bcm74110 - Add Broadcom BCM74110 RNG driver
dt-bindings: rng: add binding for BCM74110 RNG
padata: Clean up in padata_do_multithreaded()
crypto: inside-secure - Fix the return value of safexcel_xcbcmac_cra_init()
crypto: qat - Fix missing destroy_workqueue in adf_init_aer()
crypto: rsassa-pkcs1 - Reinstate support for legacy protocols
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform firmware updates from Tzung-Bi Shih:
- Do not double register "simple-framebuffer" platform device if
Generic System Framebuffers (sysfb) already did that
- Fix a missing of unregistering platform driver in error handling path
* tag 'chrome-platform-firmware-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
firmware: google: Unregister driver_info on failure
firmware: coreboot: Don't register a pdev if screen_info data is present
firmware: sysfb: Add a sysfb_handles_screen_info() helper function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"Fixes:
- Fix a leak of fwnode refcount.
Cleanups:
- Drop unused I2C driver data
- Move back from platform_driver::remove_new() to
platform_driver::remove()"
* tag 'chrome-platform-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: Switch back to struct platform_driver::remove()
platform/chrome: cros_ec_typec: fix missing fwnode reference decrement
platform/chrome: Drop explicit initialization of struct i2c_device_id::driver_data to 0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull CSD-lock update from Paul McKenney:
"This switches from sched_clock() to ktime_get_mono_fast_ns(), which on
x86 switches from the rdtsc instruction to the rdtscp instruction,
thus avoiding instruction reorderings that cause false-positive
reports of CSD-lock stalls of almost 2^46 nanoseconds. These false
positives are rare, but really are seen in the wild"
* tag 'csd-lock.2024.11.16a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
locking/csd-lock: Switch from sched_clock() to ktime_get_mono_fast_ns()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull scftorture updates from Paul McKenney:
- Avoid divide operation
- Fix cleanup code waiting for IPI handlers
- Move memory allocations out of preempt-disable region of code for
PREEMPT_RT compatibility
- Use a lockless list to avoid freeing memory while interrupts are
disabled, again for PREEMPT_RT compatibility
- Make lockless list scf_add_to_free_list() correctly handle freeing a
NULL pointer
* tag 'scftorture.2024.11.16a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
scftorture: Handle NULL argument passed to scf_add_to_free_list().
scftorture: Use a lock-less list to free memory.
scftorture: Move memory allocation outside of preempt_disable region.
scftorture: Wait until scf_cleanup_handler() completes.
scftorture: Avoid additional div operation.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc updates from Paul McKenney:
- Fix potential error due to missing #include on s390
- Compatibility with -Wmissing-fallthrough
- Run qemu with more memory during tests
* tag 'nolibc.2024.11.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
selftests/nolibc: start qemu with 1 GiB of memory
tools/nolibc: compiler: add macro __nolibc_fallthrough
tools/nolibc: s390: include std.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- a series for booting as a PVH guest, doing some cleanups after the
previous work to make PVH boot code position independent
- a fix of the xenbus driver avoiding a leak in an error case
* tag 'for-linus-6.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Fix the issue of resource not being properly released in xenbus_dev_probe()
x86/pvh: Avoid absolute symbol references in .head.text
x86/xen: Avoid relocatable quantities in Xen ELF notes
x86/pvh: Omit needless clearing of phys_base
x86/pvh: Use correct size value in GDT descriptor
x86/pvh: Call C code via the kernel virtual mapping
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for running Linux in a protected VM under the Arm
Confidential Compute Architecture (CCA)
- Guarded Control Stack user-space support. Current patches follow the
x86 ABI of implicitly creating a shadow stack on clone(). Subsequent
patches (already on the list) will add support for clone3() allowing
finer-grained control of the shadow stack size and placement from
libc
- AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are
getting close with the upcoming dpISA support)
- Other arch features:
- In-kernel use of the memcpy instructions, FEAT_MOPS (previously
only exposed to user; uaccess support not merged yet)
- MTE: hugetlbfs support and the corresponding kselftests
- Optimise CRC32 using the PMULL instructions
- Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG
- Optimise the kernel TLB flushing to use the range operations
- POE/pkey (permission overlays): further cleanups after bringing
the signal handler in line with the x86 behaviour for 6.12
- arm64 perf updates:
- Support for the NXP i.MX91 PMU in the existing IMX driver
- Support for Ampere SoCs in the Designware PCIe PMU driver
- Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC
- Support for Samsung's 'Mongoose' CPU PMU
- Support for PMUv3.9 finer-grained userspace counter access
control
- Switch back to platform_driver::remove() now that it returns
'void'
- Add some missing events for the CXL PMU driver
- Miscellaneous arm64 fixes/cleanups:
- Page table accessors cleanup: type updates, drop unused macros,
reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity
check addresses before runtime P4D/PUD folding
- Command line override for ID_AA64MMFR0_EL1.ECV (advertising the
FEAT_ECV for the generic timers) allowing Linux to boot with
firmware deployments that don't set SCTLR_EL3.ECVEn
- ACPI/arm64: tighten the check for the array of platform timer
structures and adjust the error handling procedure in
gtdt_parse_timer_block()
- Optimise the cache flush for the uprobes xol slot (skip if no
change) and other uprobes/kprobes cleanups
- Fix the context switching of tpidrro_el0 when kpti is enabled
- Dynamic shadow call stack fixes
- Sysreg updates
- Various arm64 kselftest improvements
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (168 commits)
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
arm64/ptrace: Clarify documentation of VL configuration via ptrace
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
selftests/mm: Fix unused function warning for aarch64_write_signal_pkey()
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
...
|
