summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-06-09drm/xe/svm: Fix regression disallowing 64K SVM migrationMaarten Lankhorst
When changing the condition from >= SZ_64K, it was changed to <= SZ_64K. This disallows migration of 64K, which is the exact minimum allowed. Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5057 Fixes: 794f5493f518 ("drm/xe: Strict migration policy for atomic SVM faults") Cc: stable@vger.kernel.org Cc: Matthew Brost <matthew.brost@intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Signed-off-by: Maarten Lankhorst <dev@lankhorst.se> Link: https://lore.kernel.org/r/20250521090102.2965100-1-dev@lankhorst.se (cherry picked from commit 531bef26d189b28bf0d694878c0e064b30990b6c) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-09accel/amdxdna: Fix incorrect PSP firmware sizeLizhi Hou
The incorrect PSP firmware size is used for initializing. It may cause error for newer version firmware. Fixes: 8c9ff1b181ba ("accel/amdxdna: Add a new driver for AMD AI Engine") Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://lore.kernel.org/r/20250604143217.1386272-1-lizhi.hou@amd.com
2025-06-09spi: offload: check offload ops existence before disabling the triggerAndres Urian Florez
Add a safe guard in spi_offload_trigger to check the existence of offload->ops before invoking the trigger_disable callback Signed-off-by: Andres Urian Florez <andres.emb.sys@gmail.com> Link: https://patch.msgid.link/20250608230422.325360-1-andres.emb.sys@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-09pinctrl: tb10x: Drop of_match_ptr for ID tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF warning: pinctrl-tb10x.c:815:34: warning: unused variable 'tb10x_pinctrl_dt_ids' [-Wunused-const-variable] Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505301317.EI1caRC0-lkp@intel.com/ Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/20250601105100.27927-2-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-06-09pinctrl: MAINTAINERS: Drop bouncing Jianlong HuangKrzysztof Kozlowski
Emails to Jianlong Huang bounce since 9 months, so drop the person from maintainers: 550 5.4.1 Recipient address rejected: Access denied. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/20250528104514.184122-2-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-06-09pinctrl: st: Drop unused st_gpio_bank() functionKrzysztof Kozlowski
Static inline st_gpio_bank() function is not referenced: pinctrl-st.c:377:19: error: unused function 'st_gpio_bank' [-Werror,-Wunused-function] Fixes: 701016c0cba5 ("pinctrl: st: Add pinctrl and pinconf support.") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/20250528092201.52132-2-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-06-09pinctrl: qcom: pinctrl-qcm2290: Add missing pinsWojciech Slenska
Added the missing pins to the qcm2290_pins table. Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com> Fixes: 48e049ef1238 ("pinctrl: qcom: Add QCM2290 pinctrl driver") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/20250523101437.59092-1-wojciech.slenska@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-06-09pinctrl: qcom: switch to devm_gpiochip_add_data()Dmitry Baryshkov
In order to simplify cleanup actions, use devres-enabled version of gpiochip_add_data(). As the msm_pinctrl_remove() function is now empty, drop it and all its calls from the corresponding pinctrl drivers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/20250513-pinctrl-msm-fix-v2-3-249999af0fc1@oss.qualcomm.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-06-09ALSA: hda/realtek - Add mute LED support for HP Victus 16-s1xxx and HP ↵Edip Hazuri
Victus 15-fa1xxx The mute led on those laptops is using ALC245 but requires a quirk to work This patch enables the existing quirk for the devices. Tested on my Victus 16-s1011nt Laptop and my friend's Victus 15-fa1xxx. The LED behaviour works as intended. Cc: <stable@vger.kernel.org> Signed-off-by: Edip Hazuri <edip@medip.dev> Link: https://patch.msgid.link/20250609075943.13934-2-edip@medip.dev Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-06-09ALSA: ctxfi: Replace deprecated strcpy() with strscpy()Brahmajit Das
strcpy() is deprecated; use strscpy() instead. Use strscpy() to copy the long name because there's no string to format with sprintf(). No functional changes intended. Link: https://github.com/KSPP/linux/issues/88 Signed-off-by: Brahmajit Das <listout@listout.xyz> Link: https://patch.msgid.link/20250606204000.8156-1-listout@listout.xyz Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-06-09x86/platform/amd: replace down_timeout() with down_interruptible()Jake Hillion
Currently hsmp_send_message() uses down_timeout() with a 100ms timeout to take the semaphore. However __hsmp_send_message(), the content of the critical section, has a sleep in it. On systems with significantly delayed scheduling behaviour this may take over 100ms. Convert this method to down_interruptible(). Leave the error handling the same as the documentation currently is not specific about what error is returned. Previous behaviour: a caller who competes with another caller stuck in the critical section due to scheduler delays would receive -ETIME. New behaviour: a caller who competes with another caller stuck in the critical section due to scheduler delays will complete successfully. Reviewed-by: Suma Hegde <suma.hegde@amd.com> Tested-by: Suma Hegde <suma.hegde@amd.com> Signed-off-by: Jake Hillion <jake@hillion.co.uk> Link: https://lore.kernel.org/r/20250605-amd-hsmp-v2-2-a811bc3dd74a@hillion.co.uk Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09x86/platform/amd: move final timeout check to after final sleepJake Hillion
__hsmp_send_message sleeps between result read attempts and has a timeout of 100ms. Under extreme load it's possible for these sleeps to take a long time, exceeding the 100ms. In this case the current code does not check the register and fails with ETIMEDOUT. Refactor the loop to ensure there is at least one read of the register after a sleep of any duration. This removes instances of ETIMEDOUT with a single caller, even with a misbehaving scheduler. Tested on AMD Bergamo machines. Suggested-by: Blaise Sanouillet <linux@blaise.sanouillet.com> Reviewed-by: Suma Hegde <suma.hegde@amd.com> Tested-by: Suma Hegde <suma.hegde@amd.com> Signed-off-by: Jake Hillion <jake@hillion.co.uk> Link: https://lore.kernel.org/r/20250605-amd-hsmp-v2-1-a811bc3dd74a@hillion.co.uk Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09platform/x86/amd: pmc: Clear metrics table at start of cycleMario Limonciello
The area of memory that contains the metrics table may contain garbage when the cycle starts. This normally doesn't matter because the cycle itself will populate it with valid data, however commit 9f5595d5f03fd ("platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles") started to use it during the check() phase. Depending upon what garbage is in the table it's possible that the system will wait 2.5 seconds for even the first cycle, which will be visible to a user. To prevent this from happening explicitly clear the table when logging is started. Fixes: 9f5595d5f03fd ("platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250603132412.3555302-1-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09platform/x86/intel: power-domains: Fix error code in tpmi_init()Dan Carpenter
Return -ENOMEM instead of success if kcalloc() fails. Fixes: e37be5d85c60 ("platform/x86/intel: power-domains: Add interface to get Linux die ID") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/aEKvIGCt6d8Gcx4S@stanley.mountain Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09platform/x86: samsung-galaxybook: Add SAM0426Joshua Grisham
Add device ID SAM0426 (Notebook 9 Pro and similar devices) as reported and tested by GitHub user "diego-karsa" [1]. [1]: https://github.com/joshuagrisham/samsung-galaxybook-extras/issues/69 Signed-off-by: Joshua Grisham <josh@joshuagrisham.com> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250606130909.207047-1-josh@joshuagrisham.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09ALSA: hda/intel: Add Thinkpad E15 to PM deny listTakashi Iwai
Lenovo Thinkpad E15 with Conexant CX8070 codec seems causing ugly noises after runtime-PM suspend. Disable the codec runtime PM as a workaround. Link: https://bugzilla.kernel.org/show_bug.cgi?id=220210 Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20250608091415.21170-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-06-09platform/x86/intel-uncore-freq: Fail module load when plat_info is NULLSrinivas Pandruvada
Address a Smatch static checker warning regarding an unchecked dereference in the function call: set_cdie_id(i, cluster_info, plat_info) when plat_info is NULL. Instead of addressing this one case, in general if plat_info is NULL then it can cause other issues. For example in a two package system it will give warning for duplicate sysfs entry as package ID will be always zero for both packages when creating string for attribute group name. plat_info is derived from TPMI ID TPMI_BUS_INFO, which is integral to the core TPMI design. Therefore, it should not be NULL on a production platform. Consequently, the module should fail to load if plat_info is NULL. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/platform-driver-x86/aEKvGCLd1qmX04Tc@stanley.mountain/T/#u Fixes: 8a54e2253e4c ("platform/x86/intel-uncore-freq: Uncore frequency control via TPMI") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250606205300.2384494-1-srinivas.pandruvada@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09platform/x86: ideapad-laptop: use usleep_range() for EC pollingRong Zhang
It was reported that ideapad-laptop sometimes causes some recent (since 2024) Lenovo ThinkBook models shut down when: - suspending/resuming - closing/opening the lid - (dis)connecting a charger - reading/writing some sysfs properties, e.g., fan_mode, touchpad - pressing down some Fn keys, e.g., Brightness Up/Down (Fn+F5/F6) - (seldom) loading the kmod The issue has existed since the launch day of such models, and there have been some out-of-tree workarounds (see Link:) for the issue. One disables some functionalities, while another one simply shortens IDEAPAD_EC_TIMEOUT. The disabled functionalities have read_ec_data() in their call chains, which calls schedule() between each poll. It turns out that these models suffer from the indeterminacy of schedule() because of their low tolerance for being polled too frequently. Sometimes schedule() returns too soon due to the lack of ready tasks, causing the margin between two polls to be too short. In this case, the command is somehow aborted, and too many subsequent polls (they poll for "nothing!") may eventually break the state machine in the EC, resulting in a hard shutdown. This explains why shortening IDEAPAD_EC_TIMEOUT works around the issue - it reduces the total number of polls sent to the EC. Even when it doesn't lead to a shutdown, frequent polls may also disturb the ongoing operation and notably delay (+ 10-20ms) the availability of EC response. This phenomenon is unlikely to be exclusive to the models mentioned above, so dropping the schedule() manner should also slightly improve the responsiveness of various models. Fix these issues by migrating to usleep_range(150, 300). The interval is chosen to add some margin to the minimal 50us and considering EC responses are usually available after 150-2500us based on my test. It should be enough to fix these issues on all models subject to the EC bug without introducing latency on other models. Tested on ThinkBook 14 G7+ ASP and solved both issues. No regression was introduced in the test on a model without the EC bug (ThinkBook X IMH, thanks Eric). Link: https://github.com/ty2/ideapad-laptop-tb2024g6plus/commit/6c5db18c9e8109873c2c90a7d2d7f552148f7ad4 Link: https://github.com/ferstar/ideapad-laptop-tb/commit/42d1e68e5009529d31bd23f978f636f79c023e80 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218771 Fixes: 6a09f21dd1e2 ("ideapad: add ACPI helpers") Cc: stable@vger.kernel.org Tested-by: Felix Yan <felixonmars@archlinux.org> Tested-by: Eric Long <i@hack3r.moe> Tested-by: Jianfei Zhang <zhangjianfei3@gmail.com> Tested-by: Mingcong Bai <jeffbai@aosc.io> Tested-by: Minh Le <minhld139@gmail.com> Tested-by: Sicheng Zhu <Emmet_Z@outlook.com> Signed-off-by: Rong Zhang <i@rong.moe> Link: https://lore.kernel.org/r/20250525201833.37939-1-i@rong.moe Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09drm/msm/dsi/dsi_phy_10nm: Fix missing initial VCO rateKrzysztof Kozlowski
Driver unconditionally saves current state on first init in dsi_pll_10nm_init(), but does not save the VCO rate, only some of the divider registers. The state is then restored during probe/enable via msm_dsi_phy_enable() -> msm_dsi_phy_pll_restore_state() -> dsi_10nm_pll_restore_state(). Restoring calls dsi_pll_10nm_vco_set_rate() with pll_10nm->vco_current_rate=0, which basically overwrites existing rate of VCO and messes with clock hierarchy, by setting frequency to 0 to clock tree. This makes anyway little sense - VCO rate was not saved, so should not be restored. If PLL was not configured configure it to minimum rate to avoid glitches and configuring entire in clock hierarchy to 0 Hz. Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/sz4kbwy5nwsebgf64ia7uq4ee7wbsa5uy3xmlqwcstsbntzcov@ew3dcyjdzmi2/ Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Fixes: a4ccc37693a2 ("drm/msm/dsi_pll_10nm: restore VCO rate during Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/654796/ Link: https://lore.kernel.org/r/20250520111325.92352-2-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-06-08spi: spi-pci1xxxx: Add support for 25MHz Clock frequency in C0Thangaraj Samynathan
Adds support for 25MHz clock frequency. Support for this frequency is added in C0. Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com> Link: https://patch.msgid.link/20250526104908.404564-1-thangaraj.s@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-08spi: dt-bindings: mxs-spi: allow clocks properptyFrank Li
Allow clocks property to fix below CHECK_DTB warnings: arch/arm/boot/dts/nxp/mxs/imx28-btt3-0.dtb: spi@80014000 (fsl,imx28-spi): Unevaluated properties are not allowed ('clocks' was unexpected) Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20250528222821.728544-1-Frank.Li@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-08spi: spi-qpic-snand: remove 'qpic_snand_op' structureGabor Juhos
The 'qpic_snand_op' structure is used only in the qcom_spi_send_cmdaddr() function as a type of a local variable. Additionally, the sole purpose of that variable is to keep some interim values before those gets passed as arguments for cpu_to_le32() calls. In order to simplify the code, remove the definition of the structure along with the local variable, and use the corresponding values directly as parameters for cpu_to_le32() calls. No functional changes intended. Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://patch.msgid.link/20250529-qpic-snand-remove-qpic_snand_op-v1-1-6e42b772d748@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-08spi: spi-qpic-snand: use NANDC_STEP_SIZE consistentlyGabor Juhos
Change the qcom_spi_read_page_ecc() function to use NANDC_STEP_SIZE instead of a magic number while calculating the data size to keep it consistent with other functions like qcom_spi_program_{raw,ecc,oob} and qcom_spi_read_cw_{raw,page_oob}. No functional changes. Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Md Sadre Alam <quic_mdalam@quicinc.com> Link: https://patch.msgid.link/20250525-qpic-snand-nandc_step_size-v1-1-6039e9bfe1c6@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-09drm/msm/disp: Correct porch timing for SDM845James A. MacInnes
Type-C DisplayPort inoperable due to incorrect porch settings. - Re-used wide_bus_en as flag to prevent porch shifting Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: James A. MacInnes <james.a.macinnes@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/636945/ Link: https://lore.kernel.org/r/20250212-sdm845_dp-v2-2-4954e51458f4@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-06-08spi: spi-fsl-dspi: Enable support for S32G platformsCiprian Marian Costea
Add compatible for S32G platforms, allowing DSPI to be used. Add a depends for ARCH_NXP which can replace LAYERSCAPE and also includes the new ARCH_S32 for S32G. Similarly, ARCH_MXC can replace SOC_VF610 || SOC_LS1021A which should avoid updating this for every new sub-platform in the future. Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com> Signed-off-by: Stoica Cosmin-Stefan <cosmin.stoica@nxp.com> Signed-off-by: Dan Nica <dan.nica@nxp.com> Signed-off-by: Larisa Grigore <Larisa.Grigore@nxp.com> Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com> Signed-off-by: James Clark <james.clark@linaro.org> Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-13-bea884630cfb@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-08dt-bindings: spi: dspi: Add S32G supportCiprian Marian Costea
Document S32G compatible strings. 's32g2' and 's32g3' use the same driver so 's32g2' must follow 's32g3'. The SPI controller supports target mode when the "spi-slave" flag is used so add an example. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com> Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com> Signed-off-by: James Clark <james.clark@linaro.org> Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-12-bea884630cfb@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-08spi: spi-fsl-dspi: Enable modified transfer protocol on S32GAndra-Teodora Ilie
S32G supports modified transfer protocol where both host and target devices sample later in the SCK period than in Classic SPI mode to allow the logic to tolerate more delays in device pads and board traces. Set MTFE bit in MCR register for frequencies higher than 25MHz. Signed-off-by: Andra-Teodora Ilie <andra.ilie@nxp.com> Signed-off-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman@nxp.com> Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com> Signed-off-by: James Clark <james.clark@linaro.org> Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-11-bea884630cfb@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-08spi: spi-fsl-dspi: Reinitialize DSPI regs after resuming for S32GLarisa Grigore
After resuming, DSPI registers (MCR and SR) need to be reinitialized for S32G platforms. Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com> Signed-off-by: James Clark <james.clark@linaro.org> Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-10-bea884630cfb@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-08spi: spi-fsl-dspi: Use DMA for S32G controller in target modeLarisa Grigore
Switch to DMA for target mode otherwise the controller is too slow to feed TX FIFO and UNDERFLOW occurs frequently. DMA can work only with 8 and 16 bits per word. 32bits per word is not supported, this is a hardware limitation, so we keep the controller mode in TCFQ mode. Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com> Signed-off-by: James Clark <james.clark@linaro.org> Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-9-bea884630cfb@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-08spi: spi-fsl-dspi: Avoid setup_accel logic for DMA transfersLarisa Grigore
Repacking multiple smaller words into larger ones to make use of the full FIFO doesn't save anything in DMA mode, so don't bother doing it. Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com> Signed-off-by: James Clark <james.clark@linaro.org> Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-8-bea884630cfb@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-08spi: spi-fsl-dspi: Use spi_alloc_target for targetMarius Trifu
spi_alloc_target should be used for target devices. This also sets ctlr->target automatically so delete that line. Signed-off-by: Marius Trifu <marius.trifu@nxp.com> Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com> Signed-off-by: James Clark <james.clark@linaro.org> Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-7-bea884630cfb@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-08spi: spi-fsl-dspi: Add config and regmaps for S32G platformsLarisa Grigore
S32G adds SPI_{T,R}XFR4 and extends SPI_CTAR registers to 5. Add the new regmaps, configs and bits. dspi_volatile_ranges gets SPI_{T,R}XFR4 added which affects all platforms, however they are further limited by dspi_yes_ranges. Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com> Signed-off-by: James Clark <james.clark@linaro.org> Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-6-bea884630cfb@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-08spi: spi-fsl-dspi: Define regmaps per deviceJames Clark
Refactor the regmaps so they can be defined per device rather than programmatically. This will allow us to add two new regmaps for S32G in a later commit. No functional changes. Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: James Clark <james.clark@linaro.org> Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-5-bea884630cfb@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-08spi: spi-fsl-dspi: Re-use one volatile regmap for both device typesJames Clark
max_register overrides anything in the volatile ranges, so we can get away with sharing the same one for both types. In a later commit we'll add more devices so this avoids adding even more duplication. Also replace the max_register magic numbers with their register definitions so it's clearer what's going on. No functional changes. Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: James Clark <james.clark@linaro.org> Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-4-bea884630cfb@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-09drm/msm/dp: Disable wide bus support for SDM845James A. MacInnes
When widebus was enabled for DisplayPort in commit c7c412202623 ("drm/msm/dp: enable widebus on all relevant chipsets") it was clarified that it is only supported on DPU 5.0.0 onwards which includes SC7180 on DPU revision 6.2. However, this patch missed that the description structure for SC7180 is also reused for SDM845 (because of identical io_start address) which is only DPU 4.0.0, leading to a wrongly enbled widebus feature and corruption on that platform. Create a separate msm_dp_desc_sdm845 structure for this SoC compatible, with the wide_bus_supported flag turned off. Fixes: c7c412202623 ("drm/msm/dp: enable widebus on all relevant chipsets") Signed-off-by: James A. MacInnes <james.a.macinnes@gmail.com> [DB: reworded commit text following Marijn's suggestion] Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/636944/ Link: https://lore.kernel.org/r/20250212-sdm845_dp-v2-1-4954e51458f4@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-06-08spi: spi-pci1xxxx: Fix error code in probeDan Carpenter
Return the error code if pci_alloc_irq_vectors() fails. Don't return success. Fixes: b4608e944177 ("spi: spi-pci1xxxx: Fix Probe failure with Dual SPI instance with INTx interrupts") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Thangaraj Samynathan <thangaraj.s@microchip.com> Link: https://patch.msgid.link/aEKvDrUxD19GWi0u@stanley.mountain Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-08spi: loongson: Fix build warnings about export.hHuacai Chen
After commit a934a57a42f64a4 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") and 7d95680d64ac8e836c ("scripts/misc-check: check unnecessary #include <linux/export.h> when W=1"), we get some build warnings with W=1: drivers/spi/spi-loongson-core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing So fix these build warnings for SPI/Loongson. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://patch.msgid.link/20250608142939.172108-1-chenhuacai@loongson.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-08spi: omap2-mcspi: Disable multi-mode when the previous message kept CS assertedFélix Piédallu
When the last transfer of a SPI message has the cs_change flag, the CS is kept asserted after the message. The next message can't use multi-mode because the CS will be briefly deasserted before the first transfer. Remove the early exit of the list_for_each_entry because the last transfer actually needs to be always checked. Fixes: d153ff4056cb ("spi: omap2-mcspi: Add support for MULTI-mode") Signed-off-by: Félix Piédallu <felix.piedallu@non.se.com> Link: https://patch.msgid.link/20250606-cs_change_fix-v1-2-27191a98a2e5@non.se.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-08spi: omap2-mcspi: Disable multi mode when CS should be kept asserted after ↵Félix Piédallu
message When the last transfer of a SPI message has the cs_change flag, the CS is kept asserted after the message. Multi-mode can't respect this as CS is deasserted by the hardware at the end of the message. Disable multi-mode when not applicable to the current message. Fixes: d153ff4056cb ("spi: omap2-mcspi: Add support for MULTI-mode") Signed-off-by: Félix Piédallu <felix.piedallu@non.se.com> Link: https://patch.msgid.link/20250606-cs_change_fix-v1-1-27191a98a2e5@non.se.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-08regulator: max20086: Fix refcount leak in max20086_parse_regulators_dt()Dan Carpenter
There is a missing call to of_node_put() if devm_kcalloc() fails. Fix this by changing the code to use cleanup.h magic to drop the refcount. Fixes: 6b0cd72757c6 ("regulator: max20086: fix invalid memory access") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/aDVRLqgJWMxYU03G@stanley.mountain Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-08ASoC: loongson: Fix build warnings about export.hHuacai Chen
After commit 25704938c86d7b2 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") and 1239f681359926101e ("scripts/misc-check: check unnecessary #include <linux/export.h> when W=1"), we get some build warnings with W=1: sound/soc/loongson/loongson_i2s.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing So fix these build warnings for ASoC/Loongson. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://patch.msgid.link/20250608142737.168829-1-chenhuacai@loongson.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-08ASoC: codecs: ES8326: Modify initialization configurationZhang Yi
Modify the value of ES8326_SDINOUT1_IO in the initialization Signed-off-by: Zhang Yi <zhangyi@everest-semi.com> Link: https://patch.msgid.link/20250604061821.2678-1-zhangyi@everest-semi.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-08ASoC: cs48l32: Fix a signedness bug in cs48l32_hw_params()Harshit Mogalapalli
There is a type promotion that can happen when freq(u32) variable is comapared with sclk_target(integer), when sclk_target is a negative value it promotes to a large postive integer which might not be a problem in this particular case as the condition evaluates to false when that happens, but bail out early when sclk_target has negative error codes. cs48l32_sclk_rates[i].freq >= sclk_target Fix this by adding a negative error check when snd_soc_tdm_params_to_bclk() fails Fixes: e2bcbf99d045 ("ASoC: cs48l32: Add driver for Cirrus Logic CS48L32 audio DSP") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://patch.msgid.link/20250603214813.197346-1-harshit.m.mogalapalli@oracle.com Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-08Linux 6.16-rc1Linus Torvalds
2025-06-08Merge tag 'turbostat-2025.06.08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: - Add initial DMR support, which required smarter RAPL probe - Fix AMD MSR RAPL energy reporting - Add RAPL power limit configuration output - Minor fixes * tag 'turbostat-2025.06.08' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: version 2025.06.08 tools/power turbostat: Add initial support for BartlettLake tools/power turbostat: Add initial support for DMR tools/power turbostat: Dump RAPL sysfs info tools/power turbostat: Avoid probing the same perf counters tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs cleared tools/power turbostat: Clean up add perf/msr counter logic tools/power turbostat: Introduce add_msr_counter() tools/power turbostat: Remove add_msr_perf_counter_() tools/power turbostat: Remove add_cstate_perf_counter_() tools/power turbostat: Remove add_rapl_perf_counter_() tools/power turbostat: Quit early for unsupported RAPL counters tools/power turbostat: Always check rapl_joules flag tools/power turbostat: Fix AMD package-energy reporting tools/power turbostat: Fix RAPL_GFX_ALL typo tools/power turbostat: Add Android support for MSR device handling tools/power turbostat.8: pm_domain wording fix tools/power turbostat.8: fix typo: idle_pct should be pct_idle
2025-06-08Merge tag 'timers-cleanups-2025-06-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanup from Thomas Gleixner: "The delayed from_timer() API cleanup: The renaming to the timer_*() namespace was delayed due massive conflicts against Linux-next. Now that everything is upstream finish the conversion" * tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: treewide, timers: Rename from_timer() to timer_container_of()
2025-06-08Merge tag 'x86-urgent-2025-06-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A small set of x86 fixes: - Cure IO bitmap inconsistencies A failed fork cleans up all resources of the newly created thread via exit_thread(). exit_thread() invokes io_bitmap_exit() which does the IO bitmap cleanups, which unfortunately assume that the cleanup is related to the current task, which is obviously bogus. Make it work correctly - A lockdep fix in the resctrl code removed the clearing of the command buffer in two places, which keeps stale error messages around. Bring them back. - Remove unused trace events" * tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: fs/resctrl: Restore the rdt_last_cmd_clear() calls after acquiring rdtgroup_mutex x86/iopl: Cure TIF_IO_BITMAP inconsistencies x86/fpu: Remove unused trace events
2025-06-08Merge tag 'timers-urgent-2025-06-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "Add the missing seq_file forward declaration in the timer namespace header" * tag 'timers-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timens: Add struct seq_file forward declaration
2025-06-08tools/power turbostat: version 2025.06.08Len Brown
Add initial DMR support, which required smarter RAPL probe Fix AMD MSR RAPL energy reporting Add RAPL power limit configuration output Minor fixes Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Add initial support for BartlettLakeZhang Rui
Add initial support for BartlettLake. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
generated by cgit (git 2.34.1) at 2025-09-16 05:22:10 +0000