summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-09-01net: phy: bcm7xxx: make array bcm7xxx_suspend_cfg static, reduces object ↵Colin Ian King
code size Don't populate the array bcm7xxx_suspend_cfg A on the stack, instead make it static. Makes the object code smaller by over 300 bytes: Before: text data bss dec hex filename 6351 8146 0 14497 38a1 drivers/net/phy/bcm7xxx.o After: text data bss dec hex filename 5986 8210 0 14196 3774 drivers/net/phy/bcm7xxx.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01fsl/fman: make arrays port_ids static, reduces object code sizeColin Ian King
Don't populate the arrays port_ids on the stack, instead make them static. Makes the object code smaller by over 700 bytes: Before: text data bss dec hex filename 28785 5832 192 34809 87f9 fman.o After: text data bss dec hex filename 27921 5992 192 34105 8539 fman.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01inetpeer: fix RCU lookup()Eric Dumazet
Excess of seafood or something happened while I cooked the commit adding RB tree to inetpeer. Of course, RCU rules need to be respected or bad things can happen. In this particular loop, we need to read *pp once per iteration, not twice. Fixes: b145425f269a ("inetpeer: remove AVL implementation in favor of RB tree") Reported-by: John Sperbeck <jsperbeck@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A couple of late-arriving fixes before final 4.13: - A few reverts of DT bindings on Allwinner for their ethernet driver. Discussion didn't converge, and since bindings are considered ABI it makes sense to revert instead of having to support two bindings long-term. - A fix to enumerate GPIOs properly on Marvell Armada AP806" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: dts: marvell: fix number of GPIOs in Armada AP806 description arm: dts: sunxi: Revert EMAC changes arm64: dts: allwinner: Revert EMAC changes dt-bindings: net: Revert sun8i dwmac binding
2017-09-01Merge tag 'mvebu-fixes-4.13-3' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson
mvebu fixes for 4.13 (part 3) Fix number of GPIOs in AP806 description for Armada 7K/8K * tag 'mvebu-fixes-4.13-3' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: fix number of GPIOs in Armada AP806 description Signed-off-by: Olof Johansson <olof@lixom.net>
2017-09-02powerpc/sstep: Avoid used uninitialized errorMichael Ellerman
Older compilers think val may be used uninitialized: arch/powerpc/lib/sstep.c: In function 'emulate_loadstore': arch/powerpc/lib/sstep.c:2758:23: error: 'val' may be used uninitialized in this function We know better, but initialise val to 0 to avoid breaking the build. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-01Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "The ismt driver had a problem with a rarely used transaction type and the designware driver was made even more robust against non standard ACPI tables" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: Round down ACPI provided clk to nearest supported clk i2c: ismt: Return EMSGSIZE for block reads with bogus length i2c: ismt: Don't duplicate the receive length for block reads
2017-09-01PCI: Fix typos and whitespace errorsBjorn Helgaas
Fix various typos and whitespace errors: s/Synopsis/Synopsys/ s/Designware/DesignWare/ s/Keystine/Keystone/ s/gpio/GPIO/ s/pcie/PCIe/ s/phy/PHY/ s/confgiruation/configuration/ No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-09-01PCI: Remove unused "res" variable from pci_resource_io()Shawn Lin
The "res" variable in pci_resource_io() is never used. Remove it. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-09-01PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag()Shawn Lin
The kernel-doc comments don't match the arguments, so fix the comments. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-09-01Bluetooth: make baswap src constLoic Poulain
Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-09-01fsmap: fix documentation of FMR_OF_LASTDarrick J. Wong
The FMR_OF_LAST flag is set on the last fsmap record being returned for the dataset requested, contrary to what the header file says. Fix the docs to reflect the behavior of all fsmap implementations. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2017-09-01xfs: simplify the rmap code in xfs_bmse_mergeDarrick J. Wong
In Christoph's patch to refactor xfs_bmse_merge, the updated rmap code does more work than it needs to (because map-extent auto-merges records). Remove the unnecessary unmap and save ourselves a deferred op. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-09-01xfs: remove unused flags arg from xfs_file_iomap_begin_delayEric Sandeen
Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: fix incorrect log_flushed on fsyncAmir Goldstein
When calling into _xfs_log_force{,_lsn}() with a pointer to log_flushed variable, log_flushed will be set to 1 if: 1. xlog_sync() is called to flush the active log buffer AND/OR 2. xlog_wait() is called to wait on a syncing log buffers xfs_file_fsync() checks the value of log_flushed after _xfs_log_force_lsn() call to optimize away an explicit PREFLUSH request to the data block device after writing out all the file's pages to disk. This optimization is incorrect in the following sequence of events: Task A Task B ------------------------------------------------------- xfs_file_fsync() _xfs_log_force_lsn() xlog_sync() [submit PREFLUSH] xfs_file_fsync() file_write_and_wait_range() [submit WRITE X] [endio WRITE X] _xfs_log_force_lsn() xlog_wait() [endio PREFLUSH] The write X is not guarantied to be on persistent storage when PREFLUSH request in completed, because write A was submitted after the PREFLUSH request, but xfs_file_fsync() of task A will be notified of log_flushed=1 and will skip explicit flush. If the system crashes after fsync of task A, write X may not be present on disk after reboot. This bug was discovered and demonstrated using Josef Bacik's dm-log-writes target, which can be used to record block io operations and then replay a subset of these operations onto the target device. The test goes something like this: - Use fsx to execute ops of a file and record ops on log device - Every now and then fsync the file, store md5 of file and mark the location in the log - Then replay log onto device for each mark, mount fs and compare md5 of file to stored value Cc: Christoph Hellwig <hch@lst.de> Cc: Josef Bacik <jbacik@fb.com> Cc: <stable@vger.kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: disable per-inode DAX flagChristoph Hellwig
Currently flag switching can be used to easily crash the kernel. Disable the per-inode DAX flag until that is sorted out. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: replace xfs_qm_get_rtblks with a direct call to xfs_bmap_count_leavesChristoph Hellwig
Use the existing functionality instead of directly poking into the extent list. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: rewrite xfs_bmap_count_leaves using xfs_iext_get_extentChristoph Hellwig
This avoids poking into the internals of the extent list. Also return the number of extents as the return value instead of an additional by reference argument, and make it available to callers outside of xfs_bmap_util.c Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: use xfs_iext_*_extent helpers in xfs_bmap_split_extent_atChristoph Hellwig
This abstracts the function away from details of the low-level extent list implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: use xfs_iext_*_extent helpers in xfs_bmap_shift_extentsChristoph Hellwig
This abstracts the function away from details of the low-level extent list implementation. Note that it seems like the previous implementation of rmap for the merge case was completely broken, but it no seems appear to trigger that. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: move some code around inside xfs_bmap_shift_extentsChristoph Hellwig
For the first right move we need to look up next_fsb. That means our last fsb that contains next_fsb must also be the current extent, so take advantage of that by moving the code around a bit. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01epoll: fix race between ep_poll_callback(POLLFREE) and ep_free()/ep_remove()Oleg Nesterov
The race was introduced by me in commit 971316f0503a ("epoll: ep_unregister_pollwait() can use the freed pwq->whead"). I did not realize that nothing can protect eventpoll after ep_poll_callback() sets ->whead = NULL, only whead->lock can save us from the race with ep_free() or ep_remove(). Move ->whead = NULL to the end of ep_poll_callback() and add the necessary barriers. TODO: cleanup the ewake/EPOLLEXCLUSIVE logic, it was confusing even before this patch. Hopefully this explains use-after-free reported by syzcaller: BUG: KASAN: use-after-free in debug_spin_lock_before ... _raw_spin_lock_irqsave+0x4a/0x60 kernel/locking/spinlock.c:159 ep_poll_callback+0x29f/0xff0 fs/eventpoll.c:1148 this is spin_lock(eventpoll->lock), ... Freed by task 17774: ... kfree+0xe8/0x2c0 mm/slub.c:3883 ep_free+0x22c/0x2a0 fs/eventpoll.c:865 Fixes: 971316f0503a ("epoll: ep_unregister_pollwait() can use the freed pwq->whead") Reported-by: 范龙飞 <long7573@126.com> Cc: stable@vger.kernel.org Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-01block/loop: remove unused fieldShaohua Li
nobody uses the list. Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-01block/loop: fix use after freeShaohua Li
lo_rw_aio->call_read_iter-> 1 aops->direct_IO 2 iov_iter_revert lo_rw_aio_complete could happen between 1 and 2, the bio and bvec could be freed before 2, which accesses bvec. Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-01bfq: Use icq_to_bic() consistentlyBart Van Assche
Some code uses icq_to_bic() to convert an io_cq pointer to a bfq_io_cq pointer while other code uses a direct cast. Convert the code that uses a direct cast such that it uses icq_to_bic(). Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-01bfq: Suppress compiler warnings about comparisonsBart Van Assche
This patch avoids that the following warnings are reported when building with W=1: block/bfq-iosched.c: In function 'bfq_back_seek_max_store': block/bfq-iosched.c:4860:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] if (__data < (MIN)) \ ^ block/bfq-iosched.c:4876:1: note: in expansion of macro 'STORE_FUNCTION' STORE_FUNCTION(bfq_back_seek_max_store, &bfqd->bfq_back_max, 0, INT_MAX, 0); ^~~~~~~~~~~~~~ block/bfq-iosched.c: In function 'bfq_slice_idle_store': block/bfq-iosched.c:4860:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] if (__data < (MIN)) \ ^ block/bfq-iosched.c:4879:1: note: in expansion of macro 'STORE_FUNCTION' STORE_FUNCTION(bfq_slice_idle_store, &bfqd->bfq_slice_idle, 0, INT_MAX, 2); ^~~~~~~~~~~~~~ block/bfq-iosched.c: In function 'bfq_slice_idle_us_store': block/bfq-iosched.c:4892:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] if (__data < (MIN)) \ ^ block/bfq-iosched.c:4899:1: note: in expansion of macro 'USEC_STORE_FUNCTION' USEC_STORE_FUNCTION(bfq_slice_idle_us_store, &bfqd->bfq_slice_idle, 0, ^~~~~~~~~~~~~~~~~~~ Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-01bfq: Check kstrtoul() return valueBart Van Assche
Make sysfs writes fail for invalid numbers instead of storing uninitialized data copied from the stack. This patch removes all uninitialized_var() occurrences from the BFQ source code. Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-01bfq: Declare local functions staticBart Van Assche
Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-01bfq: Annotate fall-through in a switch statementBart Van Assche
This patch avoids that gcc 7 issues a warning about fall-through when building with W=1. Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-01Merge branch 'nvme-4.14' of git://git.infradead.org/nvme into ↵Jens Axboe
for-4.14/block-postmerge Pull NVMe updates from Christoph: "A few more nvme updates for 4.14: - generate a correct default NQN (Daniel Verkamp) - metadata passthrough for the NVME_IOCTL_IO_CMD ioctl, as well as related fixes and cleanups (Keith) - better scalability for connecting to the NVMeOF target (Roland Dreier) - target support for reading the host identifier (Omri Mann)"
2017-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix handling of pinned BPF map nodes in hash of maps, from Daniel Borkmann. 2) IPSEC ESP error paths leak memory, from Steffen Klassert. 3) We need an RCU grace period before freeing fib6_node objects, from Wei Wang. 4) Must check skb_put_padto() return value in HSR driver, from FLorian Fainelli. 5) Fix oops on PHY probe failure in ftgmac100 driver, from Andrew Jeffery. 6) Fix infinite loop in UDP queue when using SO_PEEK_OFF, from Eric Dumazet. 7) Use after free when tcf_chain_destroy() called multiple times, from Jiri Pirko. 8) Fix KSZ DSA tag layer multiple free of SKBS, from Florian Fainelli. 9) Fix leak of uninitialized memory in sctp_get_sctp_info(), inet_diag_msg_sctpladdrs_fill() and inet_diag_msg_sctpaddrs_fill(). From Stefano Brivio. 10) L2TP tunnel refcount fixes from Guillaume Nault. 11) Don't leak UDP secpath in udp_set_dev_scratch(), from Yossi Kauperman. 12) Revert a PHY layer change wrt. handling of PHY_HALTED state in phy_stop_machine(), it causes regressions for multiple people. From Florian Fainelli. 13) When packets are sent out of br0 we have to clear the offload_fwdq_mark value. 14) Several NULL pointer deref fixes in packet schedulers when their ->init() routine fails. From Nikolay Aleksandrov. 15) Aquantium devices cannot checksum offload correctly when the packet is <= 60 bytes. From Pavel Belous. 16) Fix vnet header access past end of buffer in AF_PACKET, from Benjamin Poirier. 17) Double free in probe error paths of nfp driver, from Dan Carpenter. 18) QOS capability not checked properly in DCB init paths of mlx5 driver, from Huy Nguyen. 19) Fix conflicts between firmware load failure and health_care timer in mlx5, also from Huy Nguyen. 20) Fix dangling page pointer when DMA mapping errors occur in mlx5, from Eran Ben ELisha. 21) ->ndo_setup_tc() in bnxt_en driver doesn't count rings properly, from Michael Chan. 22) Missing MSIX vector free in bnxt_en, also from Michael Chan. 23) Refcount leak in xfrm layer when using sk_policy, from Lorenzo Colitti. 24) Fix copy of uninitialized data in qlge driver, from Arnd Bergmann. 25) bpf_setsockopts() erroneously always returns -EINVAL even on success. Fix from Yuchung Cheng. 26) tipc_rcv() needs to linearize the SKB before parsing the inner headers, from Parthasarathy Bhuvaragan. 27) Fix deadlock between link status updates and link removal in netvsc driver, from Stephen Hemminger. 28) Missed locking of page fragment handling in ESP output, from Steffen Klassert. 29) Fix refcnt leak in ebpf congestion control code, from Sabrina Dubroca. 30) sxgbe_probe_config_dt() doesn't check devm_kzalloc()'s return value, from Christophe Jaillet. 31) Fix missing ipv6 rx_dst_cookie update when rx_dst is updated during early demux, from Paolo Abeni. 32) Several info leaks in xfrm_user layer, from Mathias Krause. 33) Fix out of bounds read in cxgb4 driver, from Stefano Brivio. 34) Properly propagate obsolete state of route upwards in ipv6 so that upper holders like xfrm can see it. From Xin Long. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (118 commits) udp: fix secpath leak bridge: switchdev: Clear forward mark when transmitting packet mlxsw: spectrum: Forbid linking to devices that have uppers wl1251: add a missing spin_lock_init() Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()" net: dsa: bcm_sf2: Fix number of CFP entries for BCM7278 kcm: do not attach PF_KCM sockets to avoid deadlock sch_tbf: fix two null pointer dereferences on init failure sch_sfq: fix null pointer dereference on init failure sch_netem: avoid null pointer deref on init failure sch_fq_codel: avoid double free on init failure sch_cbq: fix null pointer dereferences on init failure sch_hfsc: fix null pointer deref and double free on init failure sch_hhf: fix null pointer dereference on init failure sch_multiq: fix double free on init failure sch_htb: fix crash on init failure net/mlx5e: Fix CQ moderation mode not set properly net/mlx5e: Fix inline header size for small packets net/mlx5: E-Switch, Unload the representors in the correct order net/mlx5e: Properly resolve TC offloaded ipv6 vxlan tunnel source address ...
2017-09-01Merge tag 'ceph-for-4.13-rc8' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fix from Ilya Dryomov: "ceph fscache page locking fix from Zheng, marked for stable" * tag 'ceph-for-4.13-rc8' of git://github.com/ceph/ceph-client: ceph: fix readpage from fscache
2017-09-01ARC: Re-enable MMU upon Machine Check exceptionJose Abreu
I recently came upon a scenario where I would get a double fault machine check exception tiriggered by a kernel module. However the ensuing crash stacktrace (ksym lookup) was not working correctly. Turns out that machine check auto-disables MMU while modules are allocated in kernel vaddr spapce. This patch re-enables the MMU before start printing the stacktrace making stacktracing of modules work upon a fatal exception. Cc: stable@kernel.org Signed-off-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: moved code into low level handler to avoid in 2 places]
2017-09-01ARC: Show fault information passed to show_kernel_fault_diag()Jose Abreu
Currently we pass a string argument to show_kernel_fault_diag() which describes the reason for the fault. This is not being used so just add a pr_info() which outputs the fault information. With this change we get from: | | Path: /bin/busybox | CPU: 0 PID: 92 Comm: modprobe Not tainted 4.12.0-rc6 #30 | task: 9a254780 task.stack: 9a212000 | | [ECR ]: 0x00200400 => Other Fatal Err | to: | | Unhandled Machine Check Exception | Path: /bin/busybox | CPU: 0 PID: 92 Comm: modprobe Not tainted 4.12.0-rc6 #37 | task: 9a240780 task.stack: 9a226000 | |[ECR ]: 0x00200400 => Machine Check (Other Fatal Err) | Which can help debugging. Cc: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-09-01ARC: [plat-hsdk] initial port for HSDK boardAlexey Brodkin
This initial port adds support of ARC HS Development Kit board with some basic features such serial port, USB, SD/MMC and Ethernet. Essentially we run Linux kernel on all 4 cores (i.e. utilize SMP) and heavily use IO Coherency for speeding-up DMA-aware peripherals. Note as opposed to other ARC boards we link Linux kernel to 0x9000_0000 intentionally because cores 1 and 3 configured with DCCM situated at our more usual link base 0x8000_0000. We still can use memory region starting at 0x8000_0000 as we reallocate DCCM in our platform code. Note that PAE remapping for DMA clients does not work due to an RTL bug, so CREG_PAE register must be programmed to all zeroes, otherwise it will cause problems with DMA to/from peripherals even if PAE40 is not used. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-09-01ARC: mm: Decouple RAM base address from kernel link addressEugeniy Paltsev
[Needed for HSDK] Currently the first page of system (hence RAM base) is assumed to be @ CONFIG_LINUX_LINK_BASE, where kernel itself is linked. However is case of HSDK platform, for reasons explained in that patch, this is not true. kernel needs to be linked @ 0x9000_0000 while DDR is still wired at 0x8000_0000. To properly account for this 256M of RAM, we need to introduce a new option and base page frame accountiing off of it. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: renamed CONFIG_KERNEL_RAM_BASE_ADDRESS => CONFIG_LINUX_RAM_BASE : simplified changelog]
2017-09-01ARCv2: IOC: Tighten up the contraints (specifically base / size alignment)Eugeniy Paltsev
[Needed for HSDK] - Currently IOC base is hardcoded to 0x8000_0000 which is default value of LINUX_LINK_BASE, but may not always be the case - IOC programming model imposes the constraint that IOC aperture size needs to be aligned to IOC base address, which we were not checking so far. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: reworked the changelog]
2017-09-01ARC: [plat-axs103] refactor the DT fudging codeVineet Gupta
with clk frequency setting code gone by prev commits, we can elide the unconditonal DT parsing to the specific case of quad core config where we possibly need to fudge the DT value. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-09-01ARC: [plat-axs103] use clk driver #2: Add core pll node to DT to manage cpu clkEugeniy Paltsev
Add core pll node (core_clk) to manage cpu frequency. core_clk represents pll itself. input_clk represents clock signal source (basically xtal) which comes to pll input. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-09-01ARC: [plat-axs103] use clk driver #1: Get rid of platform specific cpu clk ↵Eugeniy Paltsev
setting historically axs103 platform code used to set the cpu clk by writing to PLL registers directly. however the axs10x clk driver is now upstream so no need to do this amymore. Driver is selected automatically when CONFIG_ARC_PLAT_AXS10X is set Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: deleted more code not needed anymore]
2017-09-01ftrace: Fix memleak when unregistering dynamic ops when tracing disabledSteven Rostedt (VMware)
If function tracing is disabled by the user via the function-trace option or the proc sysctl file, and a ftrace_ops that was allocated on the heap is unregistered, then the shutdown code exits out without doing the proper clean up. This was found via kmemleak and running the ftrace selftests, as one of the tests unregisters with function tracing disabled. # cat kmemleak unreferenced object 0xffffffffa0020000 (size 4096): comm "swapper/0", pid 1, jiffies 4294668889 (age 569.209s) hex dump (first 32 bytes): 55 ff 74 24 10 55 48 89 e5 ff 74 24 18 55 48 89 U.t$.UH...t$.UH. e5 48 81 ec a8 00 00 00 48 89 44 24 50 48 89 4c .H......H.D$PH.L backtrace: [<ffffffff81d64665>] kmemleak_vmalloc+0x85/0xf0 [<ffffffff81355631>] __vmalloc_node_range+0x281/0x3e0 [<ffffffff8109697f>] module_alloc+0x4f/0x90 [<ffffffff81091170>] arch_ftrace_update_trampoline+0x160/0x420 [<ffffffff81249947>] ftrace_startup+0xe7/0x300 [<ffffffff81249bd2>] register_ftrace_function+0x72/0x90 [<ffffffff81263786>] trace_selftest_ops+0x204/0x397 [<ffffffff82bb8971>] trace_selftest_startup_function+0x394/0x624 [<ffffffff81263a75>] run_tracer_selftest+0x15c/0x1d7 [<ffffffff82bb83f1>] init_trace_selftests+0x75/0x192 [<ffffffff81002230>] do_one_initcall+0x90/0x1e2 [<ffffffff82b7d620>] kernel_init_freeable+0x350/0x3fe [<ffffffff81d61ec3>] kernel_init+0x13/0x122 [<ffffffff81d72c6a>] ret_from_fork+0x2a/0x40 [<ffffffffffffffff>] 0xffffffffffffffff Cc: stable@vger.kernel.org Fixes: 12cce594fa ("ftrace/x86: Allow !CONFIG_PREEMPT dynamic ops to use allocated trampolines") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-09-01xfs: use xfs_iext_get_extent in xfs_bmap_first_unusedChristoph Hellwig
Use the bmap abstraction instead of open-coding bmbt details here. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: switch xfs_bmap_local_to_extents to use xfs_iext_insertChristoph Hellwig
Use the helper instead of open coding it, to provide a better abstraction for the scalable extent list work. This also gets an additional assert and trace point for free. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: add a xfs_iext_update_extent helperChristoph Hellwig
This helper is used to update an extent record based on the extent index, and can be used to provide a level of abstractions between callers that want to modify in-core extent records and the details of the extent list implementation. Also switch all users of the xfs_bmbt_set_all(xfs_iext_get_ext(...)) pattern to this new helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: consolidate the various page fault handlersChristoph Hellwig
Add a new __xfs_filemap_fault helper that implements all four page fault callouts, and make these methods themselves small stubs that set the correct write_fault flag, and exit early for the non-DAX case for the hugepage related ones. Also remove the extra size checking in the pfn_fault path, which is now handled in the core DAX code. Life would be so much simpler if we only had one method for all this. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01iomap: return VM_FAULT_* codes from iomap_page_mkwriteChristoph Hellwig
All callers will need the VM_FAULT_* flags, so convert in the helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: relog dirty buffers during swapext bmbt owner changeBrian Foster
The owner change bmbt scan that occurs during extent swap operations does not handle ordered buffer failures. Buffers that cannot be marked ordered must be physically logged so previously dirty ranges of the buffer can be relogged in the transaction. Since the bmbt scan may need to process and potentially log a large number of blocks, we can't expect to complete this operation in a single transaction. Update extent swap to use a permanent transaction with enough log reservation to physically log a buffer. Update the bmbt scan to physically log any buffers that cannot be ordered and to terminate the scan with -EAGAIN. On -EAGAIN, the caller rolls the transaction and restarts the scan. Finally, update the bmbt scan helper function to skip bmbt blocks that already match the expected owner so they are not reprocessed after scan restarts. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> [darrick: fix the xfs_trans_roll call] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: disallow marking previously dirty buffers as orderedBrian Foster
Ordered buffers are used in situations where the buffer is not physically logged but must pass through the transaction/logging pipeline for a particular transaction. As a result, ordered buffers are not unpinned and written back until the transaction commits to the log. Ordered buffers have a strict requirement that the target buffer must not be currently dirty and resident in the log pipeline at the time it is marked ordered. If a dirty+ordered buffer is committed, the buffer is reinserted to the AIL but not physically relogged at the LSN of the associated checkpoint. The buffer log item is assigned the LSN of the latest checkpoint and the AIL effectively releases the previously logged buffer content from the active log before the buffer has been written back. If the tail pushes forward and a filesystem crash occurs while in this state, an inconsistent filesystem could result. It is currently the caller responsibility to ensure an ordered buffer is not already dirty from a previous modification. This is unclear and error prone when not used in situations where it is guaranteed a buffer has not been previously modified (such as new metadata allocations). To facilitate general purpose use of ordered buffers, update xfs_trans_ordered_buf() to conditionally order the buffer based on state of the log item and return the status of the result. If the bli is dirty, do not order the buffer and return false. The caller must either physically log the buffer (having acquired the appropriate log reservation) or push it from the AIL to clean it before it can be marked ordered in the current transaction. Note that ordered buffers are currently only used in two situations: 1.) inode chunk allocation where previously logged buffers are not possible and 2.) extent swap which will be updated to handle ordered buffer failures in a separate patch. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-09-01xfs: move bmbt owner change to last step of extent swapBrian Foster
The extent swap operation currently resets bmbt block owners before the inode forks are swapped. The bmbt buffers are marked as ordered so they do not have to be physically logged in the transaction. This use of ordered buffers is not safe as bmbt buffers may have been previously physically logged. The bmbt owner change algorithm needs to be updated to physically log buffers that are already dirty when/if they are encountered. This means that an extent swap will eventually require multiple rolling transactions to handle large btrees. In addition, all inode related changes must be logged before the bmbt owner change scan begins and can roll the transaction for the first time to preserve fs consistency via log recovery. In preparation for such fixes to the bmbt owner change algorithm, refactor the bmbt scan out of the extent fork swap code to the last operation before the transaction is committed. Update xfs_swap_extent_forks() to only set the inode log flags when an owner change scan is necessary. Update xfs_swap_extents() to trigger the owner change based on the inode log flags. Note that since the owner change now occurs after the extent fork swap, the inode btrees must be fixed up with the inode number of the current inode (similar to log recovery). Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-14 06:33:42 +0000