summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-03-27init: Call mem_encrypt_init() after Hyper-V hypercall init is doneMichael Kelley
Full Hyper-V initialization, including support for hypercalls, is done as an apic_post_init callback via late_time_init(). mem_encrypt_init() needs to make hypercalls when it marks swiotlb memory as decrypted. But mem_encrypt_init() is currently called a few lines before late_time_init(), so the hypercalls don't work. Fix this by moving mem_encrypt_init() after late_time_init() and related clock initializations. The intervening initializations don't do any I/O that requires the swiotlb, so moving mem_encrypt_init() slightly later has no impact. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/1678329614-3482-6-git-send-email-mikelley@microsoft.com
2023-03-27x86/mm: Handle decryption/re-encryption of bss_decrypted consistentlyMichael Kelley
sme_postprocess_startup() decrypts the bss_decrypted section when sme_me_mask is non-zero. mem_encrypt_free_decrypted_mem() re-encrypts the unused portion based on CC_ATTR_MEM_ENCRYPT. In a Hyper-V guest VM using vTOM, these conditions are not equivalent as sme_me_mask is always zero when using vTOM. Consequently, mem_encrypt_free_decrypted_mem() attempts to re-encrypt memory that was never decrypted. So check sme_me_mask in mem_encrypt_free_decrypted_mem() too. Hyper-V guests using vTOM don't need the bss_decrypted section to be decrypted, so skipping the decryption/re-encryption doesn't cause a problem. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/1678329614-3482-5-git-send-email-mikelley@microsoft.com
2023-03-27net: phy: micrel: correct KSZ9131RNX EEE capabilities and advertisementOleksij Rempel
The KSZ9131RNX incorrectly shows EEE capabilities in its registers. Although the "EEE control and capability 1" (Register 3.20) is set to 0, indicating no EEE support, the "EEE advertisement 1" (Register 7.60) is set to 0x6, advertising EEE support for 1000BaseT/Full and 100BaseT/Full. This inconsistency causes PHYlib to assume there is no EEE support, preventing control over EEE advertisement, which is enabled by default. This patch resolves the issue by utilizing the ksz9477_get_features() function to correctly set the EEE capabilities for the KSZ9131RNX. This adjustment allows proper control over EEE advertisement and ensures accurate representation of the device's capabilities. Fixes: 8b68710a3121 ("net: phy: start using genphy_c45_ethtool_get/set_eee()") Reported-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27bus: ti-sysc: Remove open coded "ranges" parsingRob Herring
"ranges" is a standard property and we have common helper functions for parsing it, so let's use them. Signed-off-by: Rob Herring <robh@kernel.org> Message-Id: <20230201220002.246907-1-robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-03-27vsock/loopback: use only sk_buff_head.lock to protect the packet queueStefano Garzarella
pkt_list_lock was used before commit 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") to protect the packet queue. After that commit we switched to sk_buff and we are using sk_buff_head.lock in almost every place to protect the packet queue except in vsock_loopback_work() when we call skb_queue_splice_init(). As reported by syzbot, this caused unlocked concurrent access to the packet queue between vsock_loopback_work() and vsock_loopback_cancel_pkt() since it is not holding pkt_list_lock. With the introduction of sk_buff_head, pkt_list_lock is redundant and can cause confusion, so let's remove it and use sk_buff_head.lock everywhere to protect the packet queue access. Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Cc: bobby.eshleman@bytedance.com Reported-and-tested-by: syzbot+befff0a9536049e7902e@syzkaller.appspotmail.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Bobby Eshleman <bobby.eshleman@bytedance.com> Reviewed-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27Merge branch 'constify-sfp-phy-nodes'David S. Miller
Russell King says: ==================== Constify a few sfp/phy fwnodes This series constifies a bunch of fwnode_handle pointers that are only used to refer to but not modify the contents of the fwnode structures. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: phy: constify fwnode_get_phy_node() fwnode argumentRussell King (Oracle)
fwnode_get_phy_node() does not motify the fwnode structure, so make the argument const, Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sfp: constify sfp-bus internal fwnode usesRussell King (Oracle)
Constify sfp-bus internal fwnode uses, since we do not modify the fwnode structures. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sfp: make sfp_bus_find_fwnode() take a const fwnodeRussell King (Oracle)
sfp_bus_find_fwnode() does not write to the fwnode, so let's make it const. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27ARM: omap1: remove redundant variables errJinpeng Cui
Return value directly from platform_device_register() instead of getting value from redundant variable err. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn> Message-Id: <20220830142136.299373-1-cui.jinpeng2@zte.com.cn> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-03-27net/net_failover: fix txq exceeding warningFaicker Mo
The failover txq is inited as 16 queues. when a packet is transmitted from the failover device firstly, the failover device will select the queue which is returned from the primary device if the primary device is UP and running. If the primary device txq is bigger than the default 16, it can lead to the following warning: eth0 selects TX queue 18, but real number of TX queues is 16 The warning backtrace is: [ 32.146376] CPU: 18 PID: 9134 Comm: chronyd Tainted: G E 6.2.8-1.el7.centos.x86_64 #1 [ 32.147175] Hardware name: Red Hat KVM, BIOS 1.10.2-3.el7_4.1 04/01/2014 [ 32.147730] Call Trace: [ 32.147971] <TASK> [ 32.148183] dump_stack_lvl+0x48/0x70 [ 32.148514] dump_stack+0x10/0x20 [ 32.148820] netdev_core_pick_tx+0xb1/0xe0 [ 32.149180] __dev_queue_xmit+0x529/0xcf0 [ 32.149533] ? __check_object_size.part.0+0x21c/0x2c0 [ 32.149967] ip_finish_output2+0x278/0x560 [ 32.150327] __ip_finish_output+0x1fe/0x2f0 [ 32.150690] ip_finish_output+0x2a/0xd0 [ 32.151032] ip_output+0x7a/0x110 [ 32.151337] ? __pfx_ip_finish_output+0x10/0x10 [ 32.151733] ip_local_out+0x5e/0x70 [ 32.152054] ip_send_skb+0x19/0x50 [ 32.152366] udp_send_skb.isra.0+0x163/0x3a0 [ 32.152736] udp_sendmsg+0xba8/0xec0 [ 32.153060] ? __folio_memcg_unlock+0x25/0x60 [ 32.153445] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 32.153854] ? sock_has_perm+0x85/0xa0 [ 32.154190] inet_sendmsg+0x6d/0x80 [ 32.154508] ? inet_sendmsg+0x6d/0x80 [ 32.154838] sock_sendmsg+0x62/0x70 [ 32.155152] ____sys_sendmsg+0x134/0x290 [ 32.155499] ___sys_sendmsg+0x81/0xc0 [ 32.155828] ? _get_random_bytes.part.0+0x79/0x1a0 [ 32.156240] ? ip4_datagram_release_cb+0x5f/0x1e0 [ 32.156649] ? get_random_u16+0x69/0xf0 [ 32.156989] ? __fget_light+0xcf/0x110 [ 32.157326] __sys_sendmmsg+0xc4/0x210 [ 32.157657] ? __sys_connect+0xb7/0xe0 [ 32.157995] ? __audit_syscall_entry+0xce/0x140 [ 32.158388] ? syscall_trace_enter.isra.0+0x12c/0x1a0 [ 32.158820] __x64_sys_sendmmsg+0x24/0x30 [ 32.159171] do_syscall_64+0x38/0x90 [ 32.159493] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fix that by reducing txq number as the non-existent primary-dev does. Fixes: cfc80d9a1163 ("net: Introduce net_failover driver") Signed-off-by: Faicker Mo <faicker.mo@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27ARM: omap1: Kconfig: Fix indentationJuerg Haefliger
The convention for indentation seems to be a single tab. Help text is further indented by an additional two whitespaces. Fix the lines that violate these rules. Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> Message-Id: <20230315091152.132443-1-juerg.haefliger@canonical.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-03-27Drivers: hv: Explicitly request decrypted in vmap_pfn() callsMichael Kelley
Update vmap_pfn() calls to explicitly request that the mapping be for decrypted access to the memory. There's no change in functionality since the PFNs passed to vmap_pfn() are above the shared_gpa_boundary, implicitly producing a decrypted mapping. But explicitly requesting "decrypted" allows the code to work before and after changes that cause vmap_pfn() to mask the PFNs to being below the shared_gpa_boundary. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Link: https://lore.kernel.org/r/1679838727-87310-4-git-send-email-mikelley@microsoft.com
2023-03-27x86/hyperv: Reorder code to facilitate future workMichael Kelley
Reorder some code to facilitate future work. No functional change. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Link: https://lore.kernel.org/r/1679838727-87310-3-git-send-email-mikelley@microsoft.com
2023-03-27ARM: imx_v6_v7_defconfig: Select CONFIG_DRM_I2C_NXP_TDA998XFabio Estevam
Select CONFIG_DRM_I2C_NXP_TDA998X so that HDMI output can work by default on a imx6sx-udoo-neo board. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27dt-bindings: soc: imx-blk-ctrl: Drop leading label in blk-ctrl in examplesMarek Vasut
Drop the leading label in block controller examples, it is unused. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27dt-bindings: soc: imx8m-blk-ctrl: Rename blk_ctrl to blk-ctrl in examplesMarek Vasut
Rename blk_ctrl@ to blk-ctrl (with dash instead of underscore) in examples so that they would match the imx8m[mn].dtsi in current Linux kernel. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK3Marek Vasut
Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK3 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR, CAN, M.2 E-Key or M.2 M-Key PCIe, USB . Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27dt-bindings: arm: Add DH electronics i.MX8M Plus DHCOM on PDK3Marek Vasut
Add DT compatible string for DH electronics i.MX8M Plus DHCOM on PDK3 evaluation board into YAML DT binding document. This setup is a general purpose SoM evaluation board. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27ARM: dts: imx: Add devicetree for Tolino VisonAndreas Kemnade
Add a devicetree for the Tolino Vision Ebook reader. It is based on boards marked with "37NB-E60Q30+4A3". It is equipped with an i.MX6SL SoC. Expected to work: - Buttons - Wifi - LEDs - uSD - eMMC - USB - RTC - Touchscreen - Backlight Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27dt-bindings: arm: fsl: add compatible string for Tolino VisionAndreas Kemnade
Add a compatible string for the Tolino Vision eBook reader. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA boardMichal Vokáč
The PCB used for all the current boards (Ursa, Draco, Hydra, Orion, Crux) was slightly redesigned and delivers some new features while some unused components were removed. - External RTC chip with supercap added. - Secure element added. - LCD display power supply enable/disable signal added. - Touch keyboard reset and interrupt signals added. - Factory reset GPIO button added. - Audio codec LM49350 (EoL) removed and replaced by PWM audio output. - QCA8334 switch was replaced by Marvell 88E6141. - PCIe completely removed. - uSD card removed and replaced by board-to-board expansion connector. There are four configuration variants of the new board: 1. Pegasus The board configuration is based on Orion with the following major changes: - Quad core SoC - 4GB of RAM - RTC with supercap added - Secure element added 2. Pegasus+ This is the very same board as Pegasus but uses the i.MX6QuadPlus SoC. 3. Lynx The board configuration is based on Draco with the following major changes: - DualLite SoC - 1GB of RAM - RTC with supercap added - Secure element added 4. Phoenix The board configuration is based on Ursa with the following major changes: - DualLite Soc - 1GB of RAM - RTC with supercap added - Secure element added - LCD display support removed - UART2 removed - Factory reset GPIO button added Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27ARM: dts: imx6dl-yapp4: Remove unneeded status "okay"Michal Vokáč
Explicit status = "okay" is not needed as it is the default. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27ARM: dts: imx6dl-yapp4: Move status to the end of property listMichal Vokáč
The status property should always be last in the list. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27ARM: dts: imx6dl-yapp4: Move phy reset into switch nodeMichal Vokáč
Drop the phy-reset-duration and phy-reset-gpios deprecated properties and move reset-gpios under the switch node. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27dt-bindings: arm: fsl: Add Y Soft IOTA Phoenix, Lynx, Pegasus and Pegasus+Michal Vokáč
These i.MX6 boards are based on a facelifted PCB from the previous designs. Routing for some unused parts was completely removed (uSD card, PCIe, audio codec) and some new parts were added (supercap backed RTC, secure element, PWM audio, GPIO button). Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: Add iris v2 carrier boardPhilippe Schenker
Add the Toradex Iris V2 Carrier Board for Colibri iMX8X, small form-factor production ready board. Additional details available at: https://www.toradex.com/products/carrier-boards/iris-carrier-board Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: Add iris carrier boardPhilippe Schenker
Add the Toradex Iris Carrier Board for Colibri iMX8X, small form-factor production ready board. Additional details available at: https://www.toradex.com/products/carrier-boards/iris-carrier-board Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: Add aster carrier boardPhilippe Schenker
Add the Toradex Aster Carrier Board for Colibri iMX8X, small form-factor with header compatible with Arduino Uno and Raspberry Pi (RPi) maker boards. Additional details available at: https://www.toradex.com/products/carrier-boards/aster-carrier-board Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: Add todo commentsPhilippe Schenker
Highlight what is still missing. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: Move gpio-keys to som levelPhilippe Schenker
SODIMM_45 that is connected to "&lsio_gpio3 10" is defined in the Colibri standard to be a wakeup pin. Move this to the SoM level device-tree and keep it disabled by default but do enable it again on the carrier-board. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: Set thermal thresholdsPhilippe Schenker
Set critical/alert thermal thresholds for all relevant SOC temperature trips to the IT value (max T_junction 105 degree Celsius) in accordance with the IT grade of the SOM. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: Add no-1-8-v to sd-cardPhilippe Schenker
Many Colibri carrier boards are using 3.3V pull-up resistors on the SD-Card connector. Letting it switch to 1.8V is an invalid state. Do prevent this from happening by keeping the signaling voltage at 3.3V. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: eval: Add spi-to-canPhilippe Schenker
Add mcp2515 spi-to-can to &lpspi2. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: Add colibri pwm b, c, dPhilippe Schenker
Add Colibri PWM_B, PWM_C, PWM_D to the module-level device-tree and set the status to ok on the eval-board. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: Add jpegenc/decPhilippe Schenker
jpeg encoder and decoder are available. Do enable them in the module level device-tree since those are self-contained. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: Disable touchscreen by defaultPhilippe Schenker
Do not enable the touchscreen. By default it is not used but should be kept to enable it from a file that includes imx8x-colibri.dtsi. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: Add gpio-line-namesPhilippe Schenker
This commit adds gpio-line-names in line with other SoM from Toradex. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: Add SPIPhilippe Schenker
Add Colibri SPI to the board. lpspi2 is being exposed on the SoM edge. Add settings to the module-level but finally enable it on the eval-board dtsi. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: Add pinctrl group for hdmi hpdPhilippe Schenker
The colibri imx8x contains a dedicated gpio meant for HDMI hot-plug-detect. Add a pinctrl group to make this usable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: Add separate pinctrl group for cs2Philippe Schenker
Add a separate pinctrl group for chip-select 2 for Colibri SPI. That way one is able to use it separately. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: Correct pull on lcdifPhilippe Schenker
The pads USDHC1_RESET_B and MCLK_IN1 need a pull-down instead of pull-disabled. Correct this. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: Split pinctrl_hog1Philippe Schenker
Split pinctrl_hog1 into a second group so CSI_MCLK can be muxed to a gpio on its own. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: Add pinctrl group for csi_mclkPhilippe Schenker
Add missing pinctrl groups that can be used to enable the correct muxing if csi_mclk is needed on SODIMM 75. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: Add atmel pinctrl groupsPhilippe Schenker
Add pinctrl groups for enabling atmel touchscreen support. Remove the pads out of pinctrl_hog0 as they now can be enabled more specific using pinctrl_atmel_conn label. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: Use new bracket formatPhilippe Schenker
Use the new bracket format as described by Rob since this seems the format that we're heading in the future. https://lore.kernel.org/all/CAL_JsqKqQdRZC08-BGJqTjzJZ8aWA41LHMbv0QyyVePVm0co7A@mail.gmail.com/ Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: Update spdx licensePhilippe Schenker
GPL-2.0+ is deprecated, update it to GPL-2.0-or-later. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: colibri-imx8x: Prepare for qxp and dx variantsPhilippe Schenker
Toradex sells the Colibri iMX8X module in variants with the i.MX 8QXP and i.MX8DX SoC. Prepare for this by moving majority of stuff from imx8qxp-colibri.dtsi into imx8x-colibri.dtsi. Remove DX from the model string. This commit intends no functional change. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27dt-bindings: arm: fsl: Add colibri-imx8x carrier boardsPhilippe Schenker
Prepare the dt-bindings for the new colibri-imx8x carrier-boards Aster and Iris. The Toradex SoM standard is called Colibri, fix the typo. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27arm64: dts: imx8mp: fix address length for LCDIF2Alexander Stein
0x238 is the offset for PANIC0_THRES, so the length needs to be greater than that. Use the size from memory map from reference manual. Fixes: 94e6197dadc9 ("arm64: dts: imx8mp: Add LCDIF2 & LDB nodes") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-22 19:20:47 +0000