summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-15Merge tag '6.3-rc6-smb311-client-negcontext-fix' of ↵Linus Torvalds
git://git.samba.org/sfrench/cifs-2.6 Pull cifs fix from Steve French: "Small client fix for better checking for smb311 negotiate context overflows, also marked for stable" * tag '6.3-rc6-smb311-client-negcontext-fix' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix negotiate context parsing
2023-04-15Merge tag 'ubifs-for-linus-6.3-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI fixes from Richard Weinberger: - Fix failure to attach when vid_hdr offset equals the (sub)page size - Fix for a deadlock in UBI's worker thread * tag 'ubifs-for-linus-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: Fix failure attaching when vid_hdr offset equals to (sub)page size ubi: Fix deadlock caused by recursively holding work_sem
2023-04-15cifs: fix negotiate context parsingDavid Disseldorp
smb311_decode_neg_context() doesn't properly check against SMB packet boundaries prior to accessing individual negotiate context entries. This is due to the length check omitting the eight byte smb2_neg_context header, as well as incorrect decrementing of len_of_ctxts. Fixes: 5100d8a3fe03 ("SMB311: Improve checking of negotiate security contexts") Reported-by: Volker Lendecke <vl@samba.org> Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-04-15debugobject: Prevent init race with static objectsThomas Gleixner
Statically initialized objects are usually not initialized via the init() function of the subsystem. They are special cased and the subsystem provides a function to validate whether an object which is not yet tracked by debugobjects is statically initialized. This means the object is started to be tracked on first use, e.g. activation. This works perfectly fine, unless there are two concurrent operations on that object. Schspa decoded the problem: T0 T1 debug_object_assert_init(addr) lock_hash_bucket() obj = lookup_object(addr); if (!obj) { unlock_hash_bucket(); - > preemption lock_subsytem_object(addr); activate_object(addr) lock_hash_bucket(); obj = lookup_object(addr); if (!obj) { unlock_hash_bucket(); if (is_static_object(addr)) init_and_track(addr); lock_hash_bucket(); obj = lookup_object(addr); obj->state = ACTIVATED; unlock_hash_bucket(); subsys function modifies content of addr, so static object detection does not longer work. unlock_subsytem_object(addr); if (is_static_object(addr)) <- Fails debugobject emits a warning and invokes the fixup function which reinitializes the already active object in the worst case. This race exists forever, but was never observed until mod_timer() got a debug_object_assert_init() added which is outside of the timer base lock held section right at the beginning of the function to cover the lockless early exit points too. Rework the code so that the lookup, the static object check and the tracking object association happens atomically under the hash bucket lock. This prevents the issue completely as all callers are serialized on the hash bucket lock and therefore cannot observe inconsistent state. Fixes: 3ac7fe5a4aab ("infrastructure to debug (dynamic) objects") Reported-by: syzbot+5093ba19745994288b53@syzkaller.appspotmail.com Debugged-by: Schspa Shi <schspa@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://syzkaller.appspot.com/bug?id=22c8a5938eab640d1c6bcc0e3dc7be519d878462 Link: https://lore.kernel.org/lkml/20230303161906.831686-1-schspa@gmail.com Link: https://lore.kernel.org/r/87zg7dzgao.ffs@tglx
2023-04-15Merge tag 'i2c-for-6.3-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Just two driver fixes" * tag 'i2c-for-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: ocores: generate stop condition after timeout in polling mode i2c: mchp-pci1xxxx: Update Timing registers
2023-04-15Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "One small fix to SCSI Enclosure Services to fix a regression caused by another recent fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ses: Handle enclosure with just a primary component gracefully
2023-04-15Merge tag 'block-6.3-2023-04-14' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fix from Jens Axboe: "A single NVMe quirk entry addition" * tag 'block-6.3-2023-04-14' of git://git.kernel.dk/linux: nvme-pci: add NVME_QUIRK_BOGUS_NID for T-FORCE Z330 SSD
2023-04-15Merge tag 'io_uring-6.3-2023-04-14' of git://git.kernel.dk/linuxLinus Torvalds
Pull io_uring fix from Jens Axboe: "Just a small tweak to when task_work needs redirection, marked for stable as well" * tag 'io_uring-6.3-2023-04-14' of git://git.kernel.dk/linux: io_uring: complete request via task work in case of DEFER_TASKRUN
2023-04-15genirq: Update affinity of secondary threadsJohn Keeping
For interrupts with secondary threads, the affinity is applied when the thread is created but if the interrupts affinity is changed later only the primary thread is updated. Update the secondary thread's affinity as well to keep all the interrupts activity on the assigned CPUs. Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230406180857.588682-1-john@metanate.com
2023-04-15softirq: Add trace points for tasklet entry/exitLingutla Chandrasekhar
Tasklets are supposed to finish their work quickly and should not block the current running process, but it is not guaranteed that they do so. Currently softirq_entry/exit can be used to analyse the total tasklets execution time, but that's not helpful to track individual tasklets execution time. That makes it hard to identify tasklet functions, which take more time than expected. Add tasklet_entry/exit trace point support to track individual tasklet execution. Trivial usage example: # echo 1 > /sys/kernel/debug/tracing/events/irq/tasklet_entry/enable # echo 1 > /sys/kernel/debug/tracing/events/irq/tasklet_exit/enable # cat /sys/kernel/debug/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 4/4 #P:4 # # _-----=> irqs-off/BH-disabled # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / _-=> migrate-disable # |||| / delay # TASK-PID CPU# ||||| TIMESTAMP FUNCTION # | | | ||||| | | <idle>-0 [003] ..s1. 314.011428: tasklet_entry: tasklet=0xffffa01ef8db2740 function=tcp_tasklet_func <idle>-0 [003] ..s1. 314.011432: tasklet_exit: tasklet=0xffffa01ef8db2740 function=tcp_tasklet_func <idle>-0 [003] ..s1. 314.017369: tasklet_entry: tasklet=0xffffa01ef8db2740 function=tcp_tasklet_func <idle>-0 [003] ..s1. 314.017371: tasklet_exit: tasklet=0xffffa01ef8db2740 function=tcp_tasklet_func Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org> Signed-off-by: J. Avila <elavila@google.com> Signed-off-by: John Stultz <jstultz@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20230407230526.1685443-1-jstultz@google.com [elavila: Port to android-mainline] [jstultz: Rebased to upstream, cut unused trace points, added comments for the tracepoints, reworded commit]
2023-04-14Merge tag 'v6.3-next-soc' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/drivers mtk-svs: smaller coding style changes mtk-mutex: - add support for mt8365 display and mt8195 VPP mutex - add support for more then 32 mods - use module_platform_driver instead of open coding mtk-mmsys: - add support for mt8195 RSZ switching - add remove function - use module_platform_driver instead of open coding - split out mt8173 routing table from the legacy table - bump up resets in mt8173 to 64 - add support for mt6795 (Helio X10) - clean-up IS_REACHABLE code for cmdq * tag 'v6.3-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (25 commits) soc: mediatek: Kconfig: Add MTK_CMDQ dependency to MTK_MMSYS soc: mediatek: mutex: Use dev_err_probe() soc: mediatek: mtk-mmsys: Add support for MT6795 Helio X10 soc: mediatek: mtk-mmsys: Change MT8173 num_resets to 64 soc: mediatek: mtk-mmsys: Split out MT8173 mmsys DDP routing table soc: mediatek: Cleanup ifdefs for IS_REACHABLE(CONFIG_MTK_CMDQ) soc: mediatek: cmdq: Add inline functions for !CONFIG_MTK_CMDQ soc: mediatek: mtk-mutex: Use module_platform_driver() macro soc: mediatek: mtk-mutex: Replace max handles number with definition soc: mediatek: mtk-mutex: Compress of_device_id array entries soc: mediatek: mtk-mmsys: Add MODULE_DEVICE_TABLE() to allow auto-load soc: mediatek: mtk-mmsys: Compress of_device_id array entries soc: mediatek: mtk-mmsys: Use module_platform_driver() macro soc: mediatek: mtk-mmsys: Add .remove() callback dt-bindings: soc: mediatek: add display mutex for MT8365 SoC dt-bindings: soc: mediatek: specify which compatible requires clocks property soc: mediatek: mtk-svs: add thermal voltage compensation if needed soc: mediatek: mtk-svs: fix passing zero to 'PTR_ERR' soc: mediatek: mtk-svs: delete node name check soc: mediatek: mutex: support MT8195 VPPSYS ... Link: https://lore.kernel.org/r/bc9f7a74-ce12-b323-021c-ff2c0473e979@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'v6.3-next-dts64' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/dt mt6795 - enable frequency hopping controller (FHCTL) - add i2c, power domains and some clocks for video enconde/decode - Sony Xperia M5 enable touchscreen, proximity sensor, accelerometer and NFC mt8173 - align keys with DT binding mt8183 - enable GPU DVFS mt8186 - enable GPU mt8192 - enable GPU mt8195 - add mutex for Video Processor Pipeline Subsystem (VPP) - add support for Mali-G57 Valhall Natt GPU baked by panfrost - add support for display on vdosys1 - add thermal support - add display PWM mt8365 - add support for the eval kit including i2c, pmic-wrapper, mmc and ethernet * tag 'v6.3-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (50 commits) arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer arm64: dts: mediatek: mt6795: Add tertiary PWM node arm64: dts: mediatek: mt8173: correct GPIO keys wakeup arm64: dts: mediatek: mt6795-xperia-m5: Add NXP PN547 NFC on I2C3 arm64: dts: mediatek: mt6795-xperia-m5: Add Sensortek STK3310 Proximity arm64: dts: mediatek: mt6795-xperia-m5: Add Synaptics RMI4 Touchscreen arm64: dts: mediatek: mt6795-xperia-m5: Enable I2C 0-3 busses arm64: dts: mediatek: mt6795: Add VDECSYS and VENCSYS clocks arm64: dts: mediatek: mt6795: Add SoC power domains arm64: dts: mediatek: mt6795: Add nodes for I2C controllers arm64: dts: mediatek: mt6795: xperia-m5: Enable Frequency Hopping arm64: dts: mediatek: mt6795: Add apmixedsys syscon node arm64: dts: mediatek: mt6795: Add Frequency Hopping Controller node arm64: dts: mediatek: cherry: Add configuration for display backlight arm64: dts: mediatek: mt8195: Add display pwm nodes arm64: dts: mediatek: mt8195: Add temperature mitigation threshold arm64: dts: mediatek: mt8195: Add thermal zones and thermal nodes arm64: dts: mediatek: add ethernet support for mt8365 SoC arm64: dts: mediatek: add mmc support for mt8365 SoC ... Link: https://lore.kernel.org/r/6920736b-ddb3-29df-d0b2-46db40cef49f@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'v6.3-next-dts32' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/dt mt7623: Disable not exising home key mt2701: change node name to match DT bindings * tag 'v6.3-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: dts: mt7623: disable home key on Bananapi BPI-R2 arm: dts: mediatek: Fix existing NAND controller node name Link: https://lore.kernel.org/r/c3b17357-e08d-da7e-def0-a7f9e0b95cb7@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'riscv-for-linus-6.3-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A fix for a missing fence when generating the NOMMU sigreturn trampoline - A set of fixes for early DTB handling of reserved memory nodes * tag 'riscv-for-linus-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: No need to relocate the dtb as it lies in the fixmap region riscv: Do not set initial_boot_params to the linear address of the dtb riscv: Move early dtb mapping into the fixmap region riscv: add icache flush for nommu sigreturn trampoline
2023-04-14Merge tag 'acpi-6.3-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These add two ACPI-related quirks: - Add a quirk to force StorageD3Enable on AMD Picasso systems (Mario Limonciello) - Add an ACPI IRQ override quirk for ASUS ExpertBook B1502CBA (Paul Menzel)" * tag 'acpi-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: resource: Skip IRQ override on ASUS ExpertBook B1502CBA ACPI: x86: utils: Add Picasso to the list for forcing StorageD3Enable
2023-04-14Merge tag 'pm-6.3-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Make the amd-pstate cpufreq driver take all of the possible combinations of the 'old' and 'new' status values correctly while changing the operation mode via sysfs (Wyes Karny)" * tag 'pm-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: amd-pstate: Fix amd_pstate mode switch
2023-04-14Merge tag 'thermal-6.3-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fix from Rafael Wysocki: "Modify the Intel thermal throttling code to avoid updating unsupported status clearing mask bits which causes the kernel to complain about unchecked MSR access (Srinivas Pandruvada)" * tag 'thermal-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: intel: Avoid updating unsupported THERM_STATUS_CLEAR mask bits
2023-04-14Merge tag 'sound-6.3-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes. At this time, quite a few fixes for the old PCI drivers are found. Although they are not regression fixes, I took these as they are materials for stable kernels. In addition, a couple of regression fixes and another couple of HD-audio quirks are included" * tag 'sound-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/hdmi: disable KAE for Intel DG2 ALSA: hda/realtek: Add quirks for Lenovo Z13/Z16 Gen2 ALSA: hda: patch_realtek: add quirk for Asus N7601ZM ALSA: firewire-tascam: add missing unwind goto in snd_tscm_stream_start_duplex() ALSA: emu10k1: don't create old pass-through playback device on Audigy ALSA: emu10k1: fix capture interrupt handler unlinking ALSA: hda/sigmatel: fix S/PDIF out on Intel D*45* motherboards ALSA: hda/sigmatel: add pin overrides for Intel DP45SG motherboard ALSA: i2c/cs8427: fix iec958 mixer control deactivation
2023-04-14selftests/resctrl: Fix incorrect error return on test completeReinette Chatre
An error snuck in between two recent conflicting changes: Until recently ->setup() used negative values to indicate normal test termination. This was changed in commit fa10366cc6f4 ("selftests/resctrl: Allow ->setup() to return errors") that transitioned ->setup() to use negative values to indicate errors and a new END_OF_TESTS to indicate normal termination. commit 42e3b093eb7c ("selftests/resctrl: Fix set up schemata with 100% allocation on first run in MBM test") continued to use negative return to indicate normal test termination. Fix mbm_setup() to use the new END_OF_TESTS to indicate error-free test termination. Fixes: 42e3b093eb7c ("selftests/resctrl: Fix set up schemata with 100% allocation on first run in MBM test") Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/lkml/bb65cce8-54d7-68c5-ef19-3364ec95392a@linux.intel.com/ Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-04-14Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "We had a fairly slow cycle on the rc side this time, here are the accumulated fixes, mostly in drivers: - irdma should not generate extra completions during flushing - Fix several memory leaks - Do not get confused in irdma's iwarp mode if IPv6 is present - Correct a link speed calculation in mlx5 - Increase the EQ/WQ limits on erdma as they are too small for big applications - Use the right math for erdma's inline mtt feature - Make erdma probing more robust to boot time ordering differences - Fix a KMSAN crash in CMA due to uninitialized qkey" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/core: Fix GID entry ref leak when create_ah fails RDMA/cma: Allow UD qp_type to join multicast only RDMA/erdma: Defer probing if netdevice can not be found RDMA/erdma: Inline mtt entries into WQE if supported RDMA/erdma: Update default EQ depth to 4096 and max_send_wr to 8192 RDMA/erdma: Fix some typos IB/mlx5: Add support for 400G_8X lane speed RDMA/irdma: Add ipv4 check to irdma_find_listener() RDMA/irdma: Increase iWARP CM default rexmit count RDMA/irdma: Fix memory leak of PBLE objects RDMA/irdma: Do not generate SW completions for NOPs
2023-04-14s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULLIlya Leoshkevich
Thomas Richter reported a crash in linux-next with a backtrace similar to the following one: [<0000000000000000>] 0x0 ([<000000000031a182>] bpf_trace_run4+0xc2/0x218) [<00000000001d59f4>] __bpf_trace_sched_switch+0x1c/0x28 [<0000000000c44a3a>] __schedule+0x43a/0x890 [<0000000000c44ef8>] schedule+0x68/0x110 [<0000000000c4e5ca>] do_nanosleep+0xa2/0x168 [<000000000026e7fe>] hrtimer_nanosleep+0xf6/0x1c0 [<000000000026eb6e>] __s390x_sys_nanosleep+0xb6/0xf0 [<0000000000c3b81c>] __do_syscall+0x1e4/0x208 [<0000000000c50510>] system_call+0x70/0x98 Last Breaking-Event-Address: [<000003ff7fda1814>] bpf_prog_65e887c70a835bbf_on_switch+0x1a4/0x1f0 The problem is that bpf_arch_text_poke() with new_addr == NULL is susceptible to the following race condition: T1 T2 ----------------- ------------------- plt.target = NULL entry: brcl 0xf,plt entry.mask = 0 lgrl %r1,plt.target br %r1 Fix by setting PLT target to the instruction following `brcl 0xf,plt` instead of 0. This way T2 will simply resume the execution of the eBPF program, which is the desired effect of passing new_addr == NULL. Fixes: f1d5df84cd8c ("s390/bpf: Implement bpf_arch_text_poke()") Reported-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/bpf/20230414154755.184502-1-iii@linux.ibm.com
2023-04-14soc: ti: smartreflex: Simplify getting the opam_sr pointerUwe Kleine-König
The probe function stores the sr_info pointer using platform_set_drvdata(). Use the corresponding platform_get_drvdata() to retrieve that pointer in the remove and shutdown functions. This simplifies these functions and makes error handling unnecessary. This is a good thing as at least for .remove() returning an error code doesn't have the desired effect. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'qcom-arm64-for-6.4-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt More Qualcomm ARM64 Devicetree updated for v6.4 Devicetree for the QCM2210/QCM2290 is introduced. Support for the RB1 board is introduced on QRB2210, RB2 on QRB4210, the AL02 board on IPQ9574, the MI01.6 board is introduced on IPQ5332 and initial support for Xiaomi Mi A3 is introduced on SM6125. Support for the output-enable/disable flag is introduced in the pinctrl-msm driver, and the non-standard "input-enable" is dropped from a range of platforms. A wide range of smaller fixes are introduced, based on Devicetree validation. MSM8953 gains LPASS, MPSS and Wireless subsystem support. The iommus property is removed from PCIe nodes in all platforms, as the only the child devices should be associated with iommu groups, through the existing iommu-map property. A few QUP instances are introduced on the IPQ5332 platform, and support for the MI01.6 board is introduced. The reserved-memory map on Huawei Nexus 6P is updated with the addition of splash screen framebuffer memory and adjustment to the reserved memory region overlapping the smem region. Regulators are introduces for the SA8775P Ride platform. A regulator is marked always-on, for correctness, on Trogdor. Pinconf fixes are introduced to both sc7180 and sc7280 devices. A dedicated reviewers list is added for boards relevant to the Chromebook engineers. A set of pinconf fixes are introduced for sc8280xp, labels are introduced for Soundwire nodes. The sensor core remoteproc and FastRPC thereon, is introduce in SDM845 and enabled for OnePlus 6/6T and Shift Shift6mq. RMTFS, remoteprocs, ath10k and ramoops is introduced for the Lenovo Tab P11. UFS support is introduced on SM6125. SM8150 no longer defines the GPU to be in headless mode by default, GPU speedbins are introduced. GPU speedbins are introduced for SM8250 as well, as is support for display on Xiaomi Mi Pad 5 Pro, with two different panels supported. Soundwire controllers, ADSP audio codec macros and the Inline Crypto Engine support is added to the SM8550 platform. * tag 'qcom-arm64-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (85 commits) arm64: dts: qcom: Add base qrb4210-rb2 board dts arm64: dts: qcom: sm8550: add Soundwire controllers arm64: dts: qcom: sm8250: Add GPU speedbin support arm64: dts: qcom: sm8150: Add GPU speedbin support arm64: dts: qcom: sm8150: Don't start Adreno in headless mode arm64: dts: qcom: ipq5332: add support for the RDP468 variant arm64: dts: qcom: sdm630: move DSI opp-table out of DSI node arm64: dts: qcom: sm6115p-j606f: Enable ATH10K WiFi arm64: dts: qcom: sm6115p-j606f: Enable remoteprocs arm64: dts: qcom: sm6115: Add RMTFS arm64: dts: qcom: sm6115-j606f: Add ramoops node arm64: dts: qcom: msm8916-thwc-ufi001c: add function to pin config arm64: dts: qcom: sm8550: Add the Inline Crypto Engine node arm64: dts: MSM8953: Add lpass nodes arm64: dts: MSM8953: Add mpss nodes arm64: dts: MSM8953: Add wcnss nodes arm64: dts: qcom: sm8350: remove superfluous "input-enable" arm64: dts: qcom: sm8150: remove superfluous "input-enable" arm64: dts: qcom: apq8016: remove superfluous "input-enable" arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strength ... Link: https://lore.kernel.org/r/20230414031550.2412379-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'qcom-dts-for-6.4-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt A few more Qualcomm ARM32 DeviceTree updates for v6.4 This adds IPA definition to the sdx65 platform, and brings a few stylistic changes to sdx55 and sdx65. Compatibles for the two new Qualcomm Robotics Platform boards, RB1 and RB2, are defined, as is Xiaomi Mi A3 and the MI01.6 development baord on IPQ5332. These are all ARM64 boards, despite being introduced through the ARM32 pull request... * tag 'qcom-dts-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: dt-bindings: arm: qcom: Document the Qualcomm qrb4210-rb2 board ARM: dts: qcom: sdx55-fn980: Move "status" property to the end of node ARM: dts: qcom: sdx55: Move reset and wake gpios to board dts dt-bindings: arm: qcom: document MI01.6 board based on IPQ5332 family dt-bindings: arm: qcom: Document xiaomi,laurel-sprout board dt-bindings: arm: qcom: Add QRB2210/QCM2290 and RB1 board ARM: dts: qcom: sdx65: move status properties to end of nodes ARM: dts: qcom: sdx65: add IPA information Link: https://lore.kernel.org/r/20230414023723.2411793-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'aspeed-6.4-devicetree' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt ASPEED device tree updates for 6.4 - Fixes for romed8hm3 GPIO, asrock SPI clocks, bonnell eeprom - Misc updates for various BMC systems - Add AST2600 UDMA node * tag 'aspeed-6.4-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed-g6: Add UDMA node ARM: dts: aspeed: greatlakes: add mctp device ARM: dts: aspeed: greatlakes: Add gpio names ARM: dts: aspeed: p10bmc: Change power supply info ARM: dts: aspeed: bonnell: Update eeprom size ARM: dts: aspeed: bonnell: Remove MAC3 ARM: dts: aspeed: everest: Add reserved memory for TPM event log ARM: dts: aspeed: mtmitchell: Enable NCSI ARM: dts: aspeed: asrock: Correct firmware flash SPI clocks ARM: dts: aspeed: e3c246d4i: Add PECI device ARM: dts: aspeed: romed8hm3: Fix GPIO polarity of system-fault LED Link: https://lore.kernel.org/r/CACPK8XfmK5S=1PQjBQHb6daDR3qTWN-_NLoXP7+ZDCk13wDxcA@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'arm-soc/for-6.4/devicetree-arm64' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM64-based SoCs Device Tree changes for 6.4, please pull the following: - Rob fixes the GICv3 ITS node name for the Stingray platforms - William adds the new-style High Speed SPI controller nodes to the BCA SocS - Rafal fixes the NAND controller interrupt name for BCM4908, LED node(s) and procmon for BCM4908. He also adds support for the USB ports, and declares USB triggered LEDs for the Netgear R8000P and TP-Link C2300. * tag 'arm-soc/for-6.4/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: broadcom: bcmbca: bcm4908: add TP-Link C2300 USB LED triggers arm64: dts: broadcom: bcmbca: bcm4908: add Netgear R8000P USB LED triggers arm64: dts: broadcom: bcmbca: bcm4908: add on-SoC USB ports arm64: dts: broadcom: bcmbca: bcm4908: fix procmon nodename arm64: dts: broadcom: bcmbca: bcm4908: fix LED nodenames arm64: dts: broadcom: bcmbca: bcm4908: fix NAND interrupt name arm64: dts: broadcom: bcmbca: Add spi controller node arm64: dts: broadcom: stringray: Fix GICv3 ITS node name Link: https://lore.kernel.org/r/20230410232606.1917803-2-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'arm-soc/for-6.4/devicetree' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM-based SoCs Device Tree changes for 6.4, please pull the following: - William adds the new-style High Speed SPI controller node to the BCA SoCs * tag 'arm-soc/for-6.4/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: broadcom: bcmbca: Add spi controller node Link: https://lore.kernel.org/r/20230410232606.1917803-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14ARM: dts: nomadik: Replace deprecated spi-gpio propertiesFabio Estevam
As stated in Documentation/devicetree/bindings/spi/spi-gpio.yaml, 'gpio-mosi' and 'gpio-sck' are deprecated properties. Use the recommeded 'mosi-gpios' and 'sck-gpios' instead. Signed-off-by: Fabio Estevam <festevam@denx.de> Link: https://lore.kernel.org/r/20230407162504.1683422-1-festevam@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230410220300.2431524-1-linus.walleij@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'qcom-arm64-for-6.4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM64 updates for v6.4 PCI I/O and MEM ranges are corrected across all targets with PCIe enabled. Likewise is CPU clocks defined to be provided from CPUfreq for a wide range of platforms, to satisfy the OPP definitions, and LLCC bank information is corrected for all relevant platforms. IPQ5332 gains SMEM, CPUfreq and support for triggering download mode. The MI01.2 board is introduced. On MSM8916 WCN compatibles are moved to be defined per board, to avoid issues when boards rely on the incorrect defaults. Support for Yiming UZ801 4G modem stick is introduced. XO clock is defined and fed to RPMCC on MSM8953 and MSM8976, to ensure clock trees are properly rooted. DSI clocks feeding into gcc are described on MSM8953. On MSM8996 the external audio components are moved from the SoC dtsi. A few DWC3 quirks are added. On MSM8998 GPIO names are introduced for Sony Xperia XZ Premium, XZ1 and XZ1 Compact. A numbe of boards have GPIO keys properly marked as wakeup-source. The SA8775P platform is extended with CPUfreq, UARTs, I2C controllers, SPI controllers, SPMI and PMICs, PDC support. The associated PMICs gains reset and power key support, as well as thermal zones defined. Nodes are sorted. On top of this the SA8775P Ride board/platform is introduced. On SC7180 and SC7280 a range of fixes coming from DeviceTree validation are introduced, some clearing up unused properties, others correcting errors. A number of Google rev0 boards on SC7180 are dropped, as these are not considered to be in use by anyone anymore. On SC8280XP RTC support is introduced and enabled for the CRD and Lenovo Thinkpad X13s. It gains another UART, upon which Bluetooth is enabled on the Lenovo ThinkPad X13s. The touchpad definition is altered to attempt to probe both devices seen in the wild. A number of bug fixes are also introduced, and the regulator definitions on X13s are corrected. On SDM845 dynamic power coefficients are improved. BWMON compatible is corrected. Xiaomi Pocophone F1 gains notification LED. Sony Xperia XZ2, XZ2 Compact and XZ3 gains display, touchscreen, gpu and remoteproc support. OnePlus 6 and 6T gains hall sensor. GPU clock controller and remoteproc nodes are added for SM6115. CPU clock are defined to come from CPUfreq. Board-specific USB-properties are moved out of the SoC dtsi. On SM6375 L3 scaling, IMEM, RMTFS, RPM sleep stats, Tsens, modem remoteproc and WiFi nodes are added. Tsens thermal zones are defined and additional low power states are defined. Sony Xperia 10 IV gains volume down key support. On SM8150 another UART is introduced, to be used by GNSS on the SA8155 ADP. Support for the Flash LED block in PM8150L is added. On SM8250 TPDM MM and PRNG is defined, MHI region is added to PCIe node. A few bug fixes are introduced after Devicetree validation. The DisplayPort controller on both SM8350 and SM8450 is defined and the related QMP instance is transitioned to the USB3/DP combo variant. IMEM and PIL info is introduced, for post mortem debugging of remoteprocs. On the HDK PMIC GLINK is enabled and role switch is enabled. Some audio resources are corrected. A typo in the USB role property of the Microsoft Surface is corrected, thanks to DeviceTree validation. PCIe controllers and PHYs descriptions are corrected, and pinctrl state definitions are moved from the soc to the board definition. BWMON compatibles are corrected. PM8550B gains the definition of the eUSB2 repeater and this is enabled on the MTP. PMIC GLINK is also defined for the MTP and connected to DWC3, for role switching support. In addition to this, a range of cleanups based on Devicetree validation is introduced. A few clock bindings are introduced, from topic-branches shared with the clock tree, to aid introduction of references to these. * tag 'qcom-arm64-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (256 commits) arm64: dts: qcom: sc8280xp-x13s: Add bluetooth arm64: dts: qcom: sc8280xp: Define uart2 arm64: dts: qcom: sc8280xp: Add "mhi" region to the PCIe nodes arm64: dts: qcom: sm8250: Add "mhi" region to the PCIe nodes arm64: dts: qcom: sdm845: Add "mhi" region to the PCIe nodes arm64: dts: qcom: sa8775p-ride: set gpio-line-names for PMIC GPIOs arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes arm64: dts: qcom: sa8775p: pmic: add thermal zones arm64: dts: qcom: sa8775p: pmic: add support for the pmm8654 RESIN input arm64: dts: qcom: sa8775p: pmic: add the power key arm64: dts: qcom: sa8775p: add the Power On device node arm64: dts: qcom: sa8775p: add support for the on-board PMICs arm64: dts: qcom: sa8775p: add the spmi node arm64: dts: qcom: sa8775p: add the pdc node arm64: dts: qcom: sa8775p: sort soc nodes by reg property arm64: dts: qcom: sa8775p: pad reg properties to 8 digits arm64: dts: qcom: sc8280xp: correct Soundwire wakeup interrupt name arm64: dts: qcom: sdm845-tama: Enable GPI_DMA0/1 arm64: dts: qcom: sdm845-tama: Enable GPU arm64: dts: qcom: sdm845-tama: Enable remoteprocs ... Link: https://lore.kernel.org/r/20230410170233.5931-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'qcom-dts-for-6.4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM32 DeviceTree updates for v6.4 stdout-path is defined for the ALFA Network AP120C-AC, to avoid the need to pass this information on the kernel commandline. Ath10k is wired up to read calibration data from the "ART" partition. PCI I/O port ranges are fixed on IPQ4019 and IPQ8064. Supply clocks are defined for KPSS L2CC and ACC clock controllers. Supply clocks for the global clock controller are being specified on IPQ4019, MSM8974 and MSM8226. PCIe RC support is enabled on the SDX55 T55 development board, IPA is defined for the SDX55 and a number of cleanup patches are introduced. Compatibles for QRB2210/QCM2290, IPQ9574, QRD8550 and IPQ5332 platforms are added, and the RB1, Yiming LTE dongle, Xiaomi Mi A3, MI01.2 and MI01.6 boards. * tag 'qcom-dts-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (28 commits) dt-bindings: arm: qcom: Add Yiming LTE dongle uz801-v3.0 (yiming-uz801v3) dt-bindings: vendor-prefixes: Add Henan Yiming Technology Co., Ltd. ARM: dts: qcom: sdx55: add dedicated SDX55 TCSR compatible ARM: dts: qcom: sdx55-t55: Move "status" property down ARM: dts: qcom: sdx55-t55: Enable PCIe RC support ARM: dts: qcom: sdx55: List the property values vertically ARM: dts: qcom: sdx55: Add support for PCIe RC controller ARM: dts: qcom: sdx55: Rename pcie0_{phy/lane} to pcie_{phy/lane} ARM: dts: qcom: sdx55: Fix the unit address of PCIe EP node ARM: dts: qcom: ipq8064: Fix the PCI I/O port range ARM: dts: qcom: ipq4019: Fix the PCI I/O port range ARM: dts: qcom: apq8064: Use 0x prefix for the PCI I/O and MEM ranges dt-bindings: arm: qcom: Add ipq9574 compatible ARM: dts: qcom: msm8974: add correct XO clock source to GCC node ARM: dts: qcom: msm8226: add clocks and clock-names to GCC node ARM: dts: qcom: rename kpss-acc-v2 nodes to power-manager nodes ARM: dts: qcom: add missing clock configuration for kpss-acc-v1 ARM: dts: qcom: add and fix clock configuration for kpss-gcc nodes ARM: dts: qcom: add per SoC compatible for qcom,kpss-gcc nodes dt-bindings: qcom: add ipq5332 boards ... Link: https://lore.kernel.org/r/20230410155226.5127-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'ti-k3-dt-for-v6.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.4 New features: * Overlays for CPSW9G and CPSW5G on J721e-evm, J7200-evm * Add support for AM625 based BeaglePlay, AM62-LP-SK * Audio, RTC, watchdog support for AM625 * McSPI for J7200,j721e, j721s2, J784s4 * ADC for j721s2 * Crypto acceleration, CPSW2G for J784s4 Non critical fixes: AM62, AM62a: * Fix schematics error to increase DDR to 4GB on AM62a-SK * L2Cache size fix (AM62a/AM625) * ti,vbus-divider property to USB1 on AM625-SK * Gpio count fix for AM625 J7200,j721e, j721s2, J784s4, AM68, AM69: * ti,sci-dev-id for J784s4 NAVSS nodes * j721e-sk: Drop application specific firmware name * am68-sk: Fix the gpio expander lines for production version Cleanups: * Pinmux header move to dt folder (next kernel PR, we will drop the uapi header). * j721e: ti,strobe-sel property cleanup for descoped HS400 MMC operation * tag 'ti-k3-dt-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (34 commits) arm64: dts: ti: k3-j784s4-evm: Add eMMC mmc0 support arm64: dts: ti: Enable audio on SK-AM62(-LP) arm64: dts: ti: k3-am62-main: Add McASP nodes arm64: dts: ti: k3-j784s4: Add MCSPI nodes arm64: dts: ti: k3-j721s2: Add MCSPI nodes arm64: dts: ti: k3-j7200: Add MCSPI nodes arm64: dts: ti: k3-j721e: Add MCSPI nodes arm64: ti: dts: Add support for AM62x LP SK arm64: dts: ti: Refractor AM625 SK dts dt-bindings: arm: ti: k3: Add compatible for AM62x LP SK arm64: dts: ti: k3-am625-sk: Add ti,vbus-divider property to usbss1 arm64: dts: ti: k3-am68-sk-base-board: Update IO EXP GPIO lines for Rev E2 arm64: dts: ti: Add k3-am625-beagleplay dt-bindings: arm: ti: Add BeaglePlay arm64: dts: ti: k3-j7200: Add overlay to enable CPSW5G ports in QSGMII mode arm64: dts: ti: j7200-main: Add CPSW5G nodes arm64: dts: ti: k3-j721e: Add overlay to enable CPSW9G ports in QSGMII mode arm64: dts: ti: k3-j721e: Add CPSW9G nodes arm64: dts: ti: k3-j784s4-evm: Enable MCU CPSW2G arm64: dts: ti: k3-j721s2-common-proc-board: Add pinmux information for ADC ... Link: https://lore.kernel.org/r/20230410140521.3u3fftgnejakqnzj@shakable Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'renesas-dts-for-v6.4-tag2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.4 (take two) - Add PWM support for the R-Car H1 and H2 SoCs, - Add slide switch and I2C support for the Marzen development board, - Add SCI (serial) and Camera support for the RZ/G2L SoC and the RZ/G2L SMARC EVK development board, - Add IOMMU support for the R-Car V4H SoC, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: r8a779a0: Revise renesas,ipmmu-main arm64: dts: renesas: falcon-csi-dsi: Set bus-type for MAX96712 arm64: dts: renesas: r8a779g0: Add iommus to MMC node arm64: dts: renesas: r8a779g0: Add iommus to DMAC nodes arm64: dts: renesas: r8a779g0: Add IPMMU nodes arm64: dts: renesas: r8a779f0: Revise renesas,ipmmu-main arm64: dts: renesas: rzg2l-smarc: Enable CRU, CSI support arm64: dts: renesas: r9a07g044: Add CSI and CRU nodes arm64: dts: renesas: r9a07g044: Enable SCI0 using DT overlay ARM: dts: r8a7790: Add PWM device nodes ARM: dts: r8a7790: Add TPU device node ARM: dts: marzen: Enable I2C support ARM: dts: marzen: Add slide switches ARM: dts: r8a7779: Add PWM support dt-bindings: clock: r8a7779: Add PWM module clock arm64: dts: renesas: rzg2l: Add clock-names and reset-names to DMAC nodes Link: https://lore.kernel.org/r/cover.1681113117.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'v6.4-rockchip-dts32-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt MMC-aliases for rk3288-veyron devices and some dts node adaptions for yaml conversions recently merged into the drm tree. * tag 'v6.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: fix rk3288 dp node ARM: dts: rockchip: fix rk3288 lvds node ARM: dts: rockchip: fix rk3288 dsi node ARM: dts: rockchip: Add mmc aliases for rk3288-veyron devices Link: https://lore.kernel.org/r/9713202.NyiUUSuA9g@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'v6.4-rockchip-dts64-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New boards: OrangePi R1 Plus, NanoPi R2C + R5C + R5S, Khadas Edge2. General RK3588 additions: audio, thermal management, sdmmc, clock fixes, watchdog; RK3588-Rock5b: rtc, pwm, audio. Display support for Odroid Go Super and PinephonePro. And some misc adaptions for recently merged yaml binding conversions. * tag 'v6.4-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (35 commits) arm64: dts: rockchip: correct panel supplies on Odroid Go Super arm64: dts: rockchip: Add rk3588-rock-5b analog audio arm64: dts: rockchip: Add I2S rk3588 nodes arm64: dts: rockchip: Add rk3588s I2S nodes arm64: dts: rockchip: Assign PLL_PPLL clock rate to 1.1 GHz on rk3588s arm64: dts: rockchip: Fix SCMI assigned clocks on rk3588s arm64: dts: rockchip: add rk3588 thermal sensor arm64: dts: rockchip: Add pwm-fan to rk3588-rock-5b arm64: dts: rockchip: Enable RTC support for Rock 5B arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS dt-bindings: Add doc for Xunlong OrangePi R1 Plus LTS arm64: dts: rockchip: Add FriendlyARM NanoPi R2C dt-bindings: Add doc for FriendlyARM NanoPi R2C arm64: dts: rockchip: Add touchscreen support to rk3399-pinephone-pro arm64: dts: rockchip: Add internal display support to rk3399-pinephone-pro dt-bindings: watchdog: rockchip: Add rockchip,rk3588-wdt string arm64: dts: rockchip: Enable watchdog support for RK3588 arm64: dts: rockchip: remove hclk from dsi node on rk356x arm64: dts: rockchip: rename vbus-supply to phy-supply in rk3566-box-demo.dts arm64: dts: rockchip: fix rk3399 dp node ... Link: https://lore.kernel.org/r/7289562.MhkbZ0Pkbq@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'sunxi-dt-for-6.4-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt - added D1 crypto node - enabled DVFS on OrangePi PC2 board - added GPIO line names on Nezha D1 board - added suniv USB nodes and enabled on licheepi-nano - new suniv boards: PopStick v1.1 and Lctech Pi - added Allwinner T113-s DTSI - added MangoPi MQ-R T113-s board variant - swapped DMA names for A23, A31, A33, D1, H3, H5, V3s * tag 'sunxi-dt-for-6.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: riscv: dts: allwinner: d1: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sunxi: h3/h5: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sun8i: v3s: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sun8i: a23/a33: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sun6i: a31: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sunxi: add MangoPi MQ-R-T113 board dt-bindings: arm: sunxi: document MangoPi MQ-R board names ARM: dts: sunxi: add Allwinner T113-s SoC .dtsi dts: add riscv include prefix link ARM: dts: suniv: Add Lctech Pi F1C200s devicetree ARM: dts: suniv: add device tree for PopStick v1.1 dt-binding: arm: sunxi: add two board compatible strings dt-bindings: vendor-prefixes: add Source Parts and Lctech names ARM: dts: suniv: licheepi-nano: enable USB ARM: dts: suniv: add USB-related device nodes riscv: dts: nezha-d1: add gpio-line-names arm64: dts: allwinner: h5: OrangePi PC2: add OPP table to enable DVFS riscv: dts: allwinner: d1: Add crypto engine node Link: https://lore.kernel.org/r/20230408125156.GA17050@jernej-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'imx-dt64-6.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX arm64 device tree changes for 6.4: - New board device trees: Apalis quadmax, DH electronics i.MX8M Plus DHCOM and PDK3, Data Modul i.MX8M Plus eDM SBC, Colibri Aster and Iris, etc. - Add FlexSPI, BBNSM and TPM PWM devices for i.MX93 SoC. - A series of imx8mq-librem5 udpates which includes minor fixes, magnetometer, CSI/camera support, and powersaving improvements. - Add Cadence USB3 support for i.MX8QXP. - Add FlexCAN support for i.MX8QXP and i.MX8QM. - Add UART DMA support for i.MX8MQ. - Add GPT devices for i.MX8MP. - Add VPU decoder and encoder support for i.MX8QM. - Add display pipeline and PCIe EP support for i.MX8M family SoCs. - A series from Peng Fan updating various i.MX8M device trees to pinctrl nodes match DT schema. - A series from Philippe Schenker improving colibri-imx8x device trees in various aspects. - Other random device tree updates. * tag 'imx-dt64-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (87 commits) arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC arm64: dts: imx8mp: Add display pipeline components arm64: dts: imx8mn: Add display pipeline components arm64: dts: imx8mm: Add display pipeline components arm64: dts: freescale: imx8qxp-mek: enable cadence usb3 arm64: dts: imx8qxp: add cadence usb3 support arm64: dts: imx8mq-librem5: add missing #clock-cells arm64: dts: imx8mm-prt8mm: update pinctrl to match dtschema arm64: dts: imx8mn-bsh-smm: update pinctrl to match dtschema arm64: dts: imx8mm-emcon: update pinctrl to match dtschema arm64: dts: imx8mq-librem5: update pinctrl to match dtschema arm64: dts: imx8mm-ddr4-evk: update gpmi pinctrl to match dtschema arm64: dts: imx8mn-evk: update i2c pinctrl to match dtschema arm64: dts: imx8mp: Add GPT blocks arm64: dts: imx8-apalis-v1.1: drop ci-disable-lpm arm64: dts: imx8dxl: drop clocks from scu clock controller arm64: dts: imx8mp: verdin-yavia: drop disable-over-current arm64: dts: imx8mq: tqma8mq-mba8mx: drop disable-over-current arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK3 arm64: dts: colibri-imx8x: Add iris v2 carrier board ... Link: https://lore.kernel.org/r/20230408101928.280271-5-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'imx-dt-6.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX arm32 device tree changes for 6.4: - New board device trees: Tolino Vison, chargebyte Tarragon, new revision of the IOTA board. - A couple of imx7d-remarkable2 update to enable cyttsp5 touch and BD71815 PMIC. - A series from Oleksij Rempel to configure Ethernet reference clock from device tree. - A series from Stefan Wahren to use label references for i.MX28 based boards. * tag 'imx-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (31 commits) ARM: dts: imx6ull: Add chargebyte Tarragon support ARM: dts: imx: Add devicetree for Tolino Vison ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA board ARM: dts: imx6dl-yapp4: Remove unneeded status "okay" ARM: dts: imx6dl-yapp4: Move status to the end of property list ARM: dts: imx6dl-yapp4: Move phy reset into switch node ARM: dts: imx28-tx28: add SPDX-License-Identifier ARM: dts: imx28-ts4600: Convert to use label references ARM: dts: imx28-evk: Convert to use label references ARM: dts: imx28-duckbill-2: Include base board ARM: dts: imx28-duckbill: Convert to use label references ARM: dts: imx28-cfa10036: Convert to use label references ARM: dts: imx28-apx4devkit: Convert to use label references ARM: dts: imx28-m28/sps1: Convert to use label references ARM: dts: imx28-apf28: Convert to use label references ARM: dts: imx7d-remarkable2: Enable the rohm,bd71815 ARM: dts: imx7d-remarkable2: Enable the cyttsp5 ARM: dts: imx6dl-yapp4: Use reset-gpios property name ARM: dts: imx6ul-prti6g: configure ethernet reference clock parent ARM: dts: imx6ul: set enet_clk_ref to CLK_ENETx_REF_SEL ... Link: https://lore.kernel.org/r/20230408101928.280271-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'imx-bindings-6.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX dt-bindings update for 6.4: - Add vendor prefix for chargebyte. - A bunch of new board compatibles: Tolino Vision, Toradex Apalis, chargebyte Tarragon, i.MX8M Plus based boards from DH electronics and Data Modul, etc. - A series from Marek Vasut to improve blk-ctrl bindings. * tag 'imx-bindings-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC dt-bindings: arm: fsl: Add chargebyte Tarragon dt-bindings: vendor-prefixes: add chargebyte dt-bindings: soc: imx-blk-ctrl: Drop leading label in blk-ctrl in examples dt-bindings: soc: imx8m-blk-ctrl: Rename blk_ctrl to blk-ctrl in examples dt-bindings: arm: Add DH electronics i.MX8M Plus DHCOM on PDK3 dt-bindings: arm: fsl: add compatible string for Tolino Vision dt-bindings: arm: fsl: Add Y Soft IOTA Phoenix, Lynx, Pegasus and Pegasus+ dt-bindings: arm: fsl: Add colibri-imx8x carrier boards dt-bindings: soc: imx8mp-media-blk-ctrl: Add LDB subnode into schema and example dt-bindings: soc: imx8mp-media-blk-ctrl: Align block controller example name dt-bindings: arm: fsl: Fix copy-paste error in comment dt-bindings: arm: fsl: add toradex,apalis-imx8 et al.
2023-04-14arm64: kernel: Fix kernel warning when nokaslr is passed to commandlinePavankumar Kondeti
'Unknown kernel command line parameters "nokaslr", will be passed to user space' message is noticed in the dmesg when nokaslr is passed to the kernel commandline on ARM64 platform. This is because nokaslr param is handled by early cpufeature detection infrastructure and the parameter is never consumed by a kernel param handler. Fix this warning by providing a dummy kernel param handler for nokaslr. Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Link: https://lore.kernel.org/r/20230412043258.397455-1-quic_pkondeti@quicinc.com Signed-off-by: Will Deacon <will@kernel.org>
2023-04-14Merge tag 'stm32-dt-for-v6.4-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.4, round 1 Highlights: ---------- - MPU: - STM32MP13: - Add FMC support. - Add QSPI support. - Add 8 UART instances nodes. - Enable UART on STM32MP135F-DK: -UART1/UART8 used on expansion connector. -UART2 used for BT. -UART4 used for console. - STMP32MP15: - Add STM32MP151 support ( documentation + machine). - Uart fixes (slew rate, aliases clean-up). - Fix GPU YAMl issue. * tag 'stm32-dt-for-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: stm32: add initial documentation for STM32MP151 ARM: dts: stm32: Add QSPI support on STM32MP13x SoC family ARM: dts: stm32: add FMC support on STM32MP13x SoC family ARM: dts: stm32: YAML validation fails for Argon Boards ARM: dts: stm32: YAML validation fails for Odyssey Boards ARM: dts: stm32: YAML validation fails for STM32MP15 ST Boards ARM: dts: stm32: add uart nodes and uart aliases on stm32mp135f-dk ARM: dts: stm32: add pins for usart2/1/4/8 in stm32mp13-pinctrl ARM: dts: stm32: add uart nodes on stm32mp13 ARM: dts: stm32: clean uart aliases on stm32mp15xx-exx boards ARM: dts: stm32: clean uart aliases on stm32mp15xx-dkx boards ARM: dts: stm32: fix slew-rate of USART2 on stm32mp15xx-dkx ARM: stm32: add support for STM32MP151 ARM: dts: stm32: fix spi1 pin assignment on stm32mp15 ARM: dts: stm32: drop invalid simple-panel compatible on stm32mp157c-lxa ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15xx-osd32 SoM Link: https://lore.kernel.org/r/63987ed6-2813-15ff-e058-73312a730d61@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'riscv-dt-for-v6.4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt RISC-V Devicetrees for v6.4 Microchip: A "fix" for the system controller's regs on PolarFire SoC, adding a missing reg property. The patch had been sitting there for months and I only re-found it recently, so you can guess how much of a "fix" it actually is. It'll become needed when the system controller's QSPI gets added in the future, but at present there's no urgency as the driver can handle both the current and "fixed" versions. StarFive: Basic support for the JH7110 & the associated first-party dev board, the VisionFive v2 (in two forms). There's a bunch of dt-bindings required for this too, all of which have had input from the DT folk. There's enough in this tag to boot to a console w/ an initramfs but little more. The SoC supports some of the "new" bit manipulation instructions, which is a good test for the recently added Zbb support in the kernel. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-dt-for-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree riscv: dts: starfive: Add StarFive JH7110 pin function definitions riscv: dts: starfive: Add initial StarFive JH7110 device tree dt-bindings: riscv: Add SiFive S7 compatible dt-bindings: interrupt-controller: Add StarFive JH7110 plic dt-bindings: timer: Add StarFive JH7110 clint dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator dt-bindings: clock: Add StarFive JH7110 system clock and reset generator riscv: dts: microchip: fix the mpfs' mailbox regs riscv: dts: microchip: add mpfs specific macb reset support Link: https://lore.kernel.org/r/20230406-shank-impromptu-3d483bbc249f@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'tegra-for-6.4-arm64-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt arm64: tegra: Device tree changes for v6.4-rc1 This adds support for the Jetson Orin NX and includes updates for Jetson AGX Orin (audio codec, USB Type-C support). * tag 'tegra-for-6.4-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Add vccmq on Jetson TX2 arm64: tegra: Populate USB Type-C Controller for Jetson AGX Orin arm64: tegra: Audio codec support on Jetson AGX Orin arm64: tegra: Support Jetson Orin NX reference platform arm64: tegra: Support Jetson Orin NX dt-bindings: tegra: Document Jetson Orin NX reference platform dt-bindings: tegra: Document Jetson Orin NX arm64: tegra: Add DSU PMUs for Tegra234 arm64: tegra: Drop serial clock-names and reset-names Link: https://lore.kernel.org/r/20230406124804.970394-6-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'tegra-for-6.4-arm-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt ARM: tegra: Device tree changes for v6.4-rc1 There are several fixes and cleanups here for some of the older Tegra consumer devices. * tag 'tegra-for-6.4-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra30: Use cpu* labels ARM: tegra30: peripherals: Add 266.5MHz nodes ARM: tegra: asus-tf101: Fix accelerometer mount matrix ARM: tegra: transformers: Bind RT5631 sound nodes ARM: tegra: transformers: Update WM8903 sound nodes Link: https://lore.kernel.org/r/20230406124804.970394-5-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'tegra-for-6.4-dt-bindings' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt dt-bindings: Changes for v6.4-rc1 This is a single patch that drops unneeded quotes from various Tegra- related device tree bindings. * tag 'tegra-for-6.4-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: arm: nvidia: Drop unneeded quotes Link: https://lore.kernel.org/r/20230406124804.970394-4-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'asahi-soc-dt-6.4' of https://github.com/AsahiLinux/linux into soc/dtArnd Bergmann
Apple SoC DT updates for 6.4. This time we have the M2 (t8112) device trees and compatible updates, as well as a minor fix for PCIe ports on the prior models. * tag 'asahi-soc-dt-6.4' of https://github.com/AsahiLinux/linux: arm64: dts: apple: t600x: Disable unused PCIe ports arm64: dts: apple: t8103: Disable unused PCIe ports arm64: dts: apple: t8112: Initial t8112 (M2) device trees dt-bindings: arm: apple: Add t8112 j413/j473/j493 compatibles dt-bindings: clock: apple,nco: Add t8112-nco compatible dt-bindings: i2c: apple,i2c: Add apple,t8112-i2c compatible dt-bindings: pinctrl: apple,pinctrl: Add apple,t8112-pinctrl compatible dt-bindings: pci: apple,pcie: Add t8112 support dt-bindings: nvme: apple: Add apple,t8112-nvme-ans2 compatible string dt-bindings: mailbox: apple,mailbox: Add t8112 compatibles dt-bindings: iommu: apple,sart: Add apple,t8112-sart compatible string dt-bindings: interrupt-controller: apple,aic2: Add apple,t8112-aic compatible dt-bindings: arm: cpus: Add apple,avalanche & blizzard compatibles dt-bindings: watchdog: apple,wdt: Add t8112-wdt compatible dt-bindings: arm: apple: apple,pmgr: Add t8112-pmgr compatible dt-bindings: power: apple,pmgr-pwrstate: Add t8112 compatible Link: https://lore.kernel.org/r/7263df01-aebc-2db5-f074-4805e0ae9fbc@marcan.st Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'samsung-dt-6.4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM changes for v6.4 1. Several cleanups and improvements as a result of dtbs_checks: align node names with bindings, drop incorrect properties, fix clock-names, add missing "ports" node. 2. Move DP and MIPI phys to PMU node (DTS with binding change). 3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was selected by the driver based on the MSHC alias) and add generic MMC aliases in each board. The aliases match known numbering in the schematics. * tag 'samsung-dt-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: dt-bindings: soc: samsung: exynos-pmu: allow phys as child on Exynos3 and Exynos4 ARM: dts: exynos: add mmc aliases ARM: dts: exynos: replace mshc0 alias with mmc-ddr-1_8v property ARM: dts: exynos: fix MCT compatible in Universal C210 ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5250 ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5420 ARM: dts: exynos: move MIPI phy to PMU node in Exynos4 ARM: dts: exynos: move MIPI phy to PMU node in Exynos3250 ARM: dts: exynos: drop unused samsung,camclk-out property in Midas ARM: dts: s5pv210: correct MIPI CSIS clock name ARM: dts: exynos: correct whitespace in Midas ARM: dts: exynos: fix WM8960 clock name in Itop Elite ARM: dts: exynos: add ports to TC358764 bridge on Arndale ARM: dts: exynos: drop fake align STMPE properties in P4 Note ARM: dts: exynos: align STMPE ADC node name with bindings in P4 Note Link: https://lore.kernel.org/r/20230405080438.156805-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge branch 'acpi-x86'Rafael J. Wysocki
Merge a quirk to force StorageD3Enable on AMD Picasso systems (Mario Limonciello). * acpi-x86: ACPI: x86: utils: Add Picasso to the list for forcing StorageD3Enable
2023-04-14Merge tag 'samsung-dt64-6.4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM64 changes for v6.4 1. Exynos850: add headers with AUD, G3D and HSI clock controller clock IDs. Add G3D (GPU) clock controller node. 2. Exynos5433: fixes for dtbs_check: move MIPI phy to PMU node. 3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was selected by the driver based on the MSHC alias) and add generic MMC aliases in each board. The aliases match known numbering in the schematics. * tag 'samsung-dt64-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: add mmc aliases arm64: dts: exynos: drop mshc aliases arm64: dts: exynos: Add CMU_G3D node for Exynos850 SoC arm64: dts: exynos: move MIPI phy to PMU node in Exynos5433 dt-bindings: clock: exynos850: Add AUD and HSI main gate clocks dt-bindings: clock: exynos850: Add Exynos850 CMU_G3D Link: https://lore.kernel.org/r/20230405080438.156805-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14soc: fsl: Use of_property_present() for testing DT property presenceRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14ARM: pxa: Use of_property_read_bool() for boolean propertiesRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to to of_property_read_bool(). Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit (git 2.34.1) at 2025-09-12 17:33:20 +0000