summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-09-13xen/netfront: don't bug in case of too many fragsJuergen Gross
Commit 57f230ab04d291 ("xen/netfront: raise max number of slots in xennet_get_responses()") raised the max number of allowed slots by one. This seems to be problematic in some configurations with netback using a larger MAX_SKB_FRAGS value (e.g. old Linux kernel with MAX_SKB_FRAGS defined as 18 instead of nowadays 17). Instead of BUG_ON() in this case just fall back to retransmission. Fixes: 57f230ab04d291 ("xen/netfront: raise max number of slots in xennet_get_responses()") Cc: stable@vger.kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-13ipv6: use rt6_info members when dst is set in rt6_fill_nodeXin Long
In inet6_rtm_getroute, since Commit 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes"), it has used rt->from to dump route info instead of rt. However for some route like cache, some of its information like flags or gateway is not the same as that of the 'from' one. It caused 'ip route get' to dump the wrong route information. In Jianlin's testing, the output information even lost the expiration time for a pmtu route cache due to the wrong fib6_flags. So change to use rt6_info members for dst addr, src addr, flags and gateway when it tries to dump a route entry without fibmatch set. v1->v2: - not use rt6i_prefsrc. - also fix the gw dump issue. Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-13ALSA: oxfw: fix memory leak of private dataTakashi Sakamoto
Although private data of sound card instance is usually allocated in the tail of the instance, drivers in ALSA firewire stack allocate the private data before allocating the instance. In this case, the private data should be released explicitly at .private_free callback of the instance. This commit fixes memory leak following to the above design. Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-13ALSA: firewire-tascam: fix memory leak of private dataTakashi Sakamoto
Although private data of sound card instance is usually allocated in the tail of the instance, drivers in ALSA firewire stack allocate the private data before allocating the instance. In this case, the private data should be released explicitly at .private_free callback of the instance. This commit fixes memory leak following to the above design. Fixes: b610386c8afb ('ALSA: firewire-tascam: deleyed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-13ALSA: firewire-digi00x: fix memory leak of private dataTakashi Sakamoto
Although private data of sound card instance is usually allocated in the tail of the instance, drivers in ALSA firewire stack allocate the private data before allocating the instance. In this case, the private data should be released explicitly at .private_free callback of the instance. This commit fixes memory leak following to the above design. Fixes: 86c8dd7f4da3 ('ALSA: firewire-digi00x: delayed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-13drm: bridge: document bridge attach/detach imbalancePeter Rosin
Since commit 4a878c03d562 ("drm: bridge: Detach bridge from encoder at encoder cleanup time"), it is generally no longer correct to detach bridges from encoders manually. Document that. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180806061910.29914-3-peda@axentia.se
2018-09-13drm/bridge: analogix_dp: Downgrade "Link Training" messages to dev_dbgMarc Zyngier
The Analogix DP bridge driver is pretty verbose, and outputs things like [ 619.414067] rockchip-dp ff970000.edp: Link Training Clock Recovery success [ 619.429233] rockchip-dp ff970000.edp: Link Training success! each time the display gets unblanked. While it is good to know that the device is behaving correctly, users already know that because they can see some video output. Let's keep these messages for cases where we need to actually debug the driver (we have dynamic debug to enable them at runtime if need be), and let's keep the kernel quiet otherwise. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180805172857.2517-1-marc.zyngier@arm.com
2018-09-12Merge tag 'pci-v4.19-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Add Tyrel Datwyler as maintainer for PPC64 RPA hotplug (Tyrel Datwyler) - Add Gustavo Pimentel as DesignWare PCI maintainer (Joao Pinto) - Fix a Switchtec Spectre v1 vulnerability (Gustavo A. R. Silva) - Revert an unnecessary Intel 300 ACS quirk (Mika Westerberg) - Fix pciehp hot-add/powerfault detection that left indicators in wrong state (Keith Busch) - Fix pci_reset_bus() logic error (Dennis Dalessandro) - Revert IB/hfi1 PCI reset change that caused a deadlock (Dennis Dalessandro) - Allow enabling PASID on Root Complex Integrated Endpoints (Felix Kuehling) * tag 'pci-v4.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Fix enabling of PASID on RC integrated endpoints IB/hfi1,PCI: Allow bus reset while probing PCI: Fix faulty logic in pci_reset_bus() PCI: pciehp: Fix hot-add vs powerfault detection order switchtec: Fix Spectre v1 vulnerability Revert "PCI: Add ACS quirk for Intel 300 series" MAINTAINERS: Add Gustavo Pimentel as DesignWare PCI maintainer MAINTAINERS: Add entries for PPC64 RPA PCI hotplug drivers
2018-09-12Merge tag 'for-linus-4.19' of git://github.com/cminyard/linux-ipmiLinus Torvalds
Pull IPMI bugfixes from Corey Minyard: "A few fixes that came around or after the merge window, except for commit cd2315d471f4 ("ipmi: kcs_bmc: don't change device name") which is for a driver that very few people use, and those people need the change" * tag 'for-linus-4.19' of git://github.com/cminyard/linux-ipmi: ipmi: Fix NULL pointer dereference in ssif_probe ipmi: Fix I2C client removal in the SSIF driver ipmi: Move BT capabilities detection to the detect call ipmi: Rework SMI registration failure ipmi: kcs_bmc: don't change device name
2018-09-13crypto: ccp - add timeout support in the SEV commandBrijesh Singh
Currently, the CCP driver assumes that the SEV command issued to the PSP will always return (i.e. it will never hang). But recently, firmware bugs have shown that a command can hang. Since of the SEV commands are used in probe routines, this can cause boot hangs and/or loss of virtualization capabilities. To protect against firmware bugs, add a timeout in the SEV command execution flow. If a command does not complete within the specified timeout then return -ETIMEOUT and stop the driver from executing any further commands since the state of the SEV firmware is unknown. Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gary Hook <Gary.Hook@amd.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: linux-kernel@vger.kernel.org Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-12Merge tag 'drm-fixes-2018-09-12' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm nouveau fixes from Dave Airlie: "I'm sending this separately as it's a bit larger than I generally like for one driver, but it does contain a bunch of make my nvidia laptop not die (runpm) and a bunch to make my docking station and monitor display stuff (mst) fixes. Lyude has spent a lot of time on these, and we are putting the fixes into distro kernels as well asap, as it helps a bunch of standard Lenovo laptops, so I'm fairly happy things are better than they were before these patches, but I decided to split them out just for clarification" * tag 'drm-fixes-2018-09-12' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/disp/gm200-: enforce identity-mapped SOR assignment for LVDS/eDP panels drm/nouveau/disp: fix DP disable race drm/nouveau/disp: move eDP panel power handling drm/nouveau/disp: remove unused struct member drm/nouveau/TBDdevinit: don't fail when PMU/PRE_OS is missing from VBIOS drm/nouveau/mmu: don't attempt to dereference vmm without valid instance pointer drm/nouveau: fix oops in client init failure path drm/nouveau: Fix nouveau_connector_ddc_detect() drm/nouveau/drm/nouveau: Don't forget to cancel hpd_work on suspend/unload drm/nouveau/drm/nouveau: Prevent handling ACPI HPD events too early drm/nouveau: Reset MST branching unit before enabling drm/nouveau: Only write DP_MSTM_CTRL when needed drm/nouveau: Remove useless poll_enable() call in drm_load() drm/nouveau: Remove useless poll_disable() call in switcheroo_set_state() drm/nouveau: Remove useless poll_enable() call in switcheroo_set_state() drm/nouveau: Fix deadlocks in nouveau_connector_detect() drm/nouveau/drm/nouveau: Use pm_runtime_get_noresume() in connector_detect() drm/nouveau/drm/nouveau: Fix deadlock with fb_helper with async RPM requests drm/nouveau: Remove duplicate poll_enable() in pmops_runtime_suspend() drm/nouveau/drm/nouveau: Fix bogus drm_kms_helper_poll_enable() placement
2018-09-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix up several Kconfig dependencies in netfilter, from Martin Willi and Florian Westphal. 2) Memory leak in be2net driver, from Petr Oros. 3) Memory leak in E-Switch handling of mlx5 driver, from Raed Salem. 4) mlx5_attach_interface needs to check for errors, from Huy Nguyen. 5) tipc_release() needs to orphan the sock, from Cong Wang. 6) Need to program TxConfig register after TX/RX is enabled in r8169 driver, not beforehand, from Maciej S. Szmigiero. 7) Handle 64K PAGE_SIZE properly in ena driver, from Netanel Belgazal. 8) Fix crash regression in ip_do_fragment(), from Taehee Yoo. 9) syzbot can create conditions where kernel log is flooded with synflood warnings due to creation of many listening sockets, fix that. From Willem de Bruijn. 10) Fix RCU issues in rds socket layer, from Cong Wang. 11) Fix vlan matching in nfp driver, from Pieter Jansen van Vuuren. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits) nfp: flower: reject tunnel encap with ipv6 outer headers for offloading nfp: flower: fix vlan match by checking both vlan id and vlan pcp tipc: check return value of __tipc_dump_start() s390/qeth: don't dump past end of unknown HW header s390/qeth: use vzalloc for QUERY OAT buffer s390/qeth: switch on SG by default for IQD devices s390/qeth: indicate error when netdev allocation fails rds: fix two RCU related problems r8169: Clear RTL_FLAG_TASK_*_PENDING when clearing RTL_FLAG_TASK_ENABLED erspan: fix error handling for erspan tunnel erspan: return PACKET_REJECT when the appropriate tunnel is not found tcp: rate limit synflood warnings further MIPS: lantiq: dma: add dev pointer netfilter: xt_hashlimit: use s->file instead of s->private netfilter: nfnetlink_queue: Solve the NFQUEUE/conntrack clash for NF_REPEAT netfilter: cttimeout: ctnl_timeout_find_get() returns incorrect pointer to type netfilter: conntrack: timeout interface depend on CONFIG_NF_CONNTRACK_TIMEOUT netfilter: conntrack: reset tcp maxwin on re-register qmi_wwan: Support dynamic config on Quectel EP06 ethernet: renesas: convert to SPDX identifiers ...
2018-09-13drm/nouveau/devinit: fix warning when PMU/PRE_OS is missingBen Skeggs
Messed up when sending pull request and sent an outdated version of previous patch, this fixes it up to remove warnings. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-09-12null_blk: fix zoned support for non-rq based operationJens Axboe
The supported added for zones in null_blk seem to assume that only rq based operation is possible. But this depends on the queue_mode setting, if this is set to 0, then cmd->bio is what we need to be operating on. Right now any attempt to load null_blk with queue_mode=0 will insta-crash, since cmd->rq is NULL and null_handle_cmd() assumes it to always be set. Make the zoned code deal with bio's instead, or pass in the appropriate sector/nr_sectors instead. Fixes: ca4b2a011948 ("null_blk: add zone support") Tested-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-12cifs: read overflow in is_valid_oplock_break()Dan Carpenter
We need to verify that the "data_offset" is within bounds. Reported-by: Dr Silvio Cesare of InfoSect <silvio.cesare@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-09-12bpf: use __GFP_COMP while allocating pageTushar Dave
Helper bpg_msg_pull_data() can allocate multiple pages while linearizing multiple scatterlist elements into one shared page. However, if the shared page has size > PAGE_SIZE, using copy_page_to_iter() causes below warning. e.g. [ 6367.019832] WARNING: CPU: 2 PID: 7410 at lib/iov_iter.c:825 page_copy_sane.part.8+0x0/0x8 To avoid above warning, use __GFP_COMP while allocating multiple contiguous pages. Fixes: 015632bb30da ("bpf: sk_msg program helper bpf_sk_msg_pull_data") Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-12bpf/verifier: disallow pointer subtractionAlexei Starovoitov
Subtraction of pointers was accidentally allowed for unpriv programs by commit 82abbf8d2fc4. Revert that part of commit. Fixes: 82abbf8d2fc4 ("bpf: do not allow root to mangle valid pointers") Reported-by: Jann Horn <jannh@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-12drm/amd/display: fix ptr_ret.cocci warningskbuild test robot
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c:771:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Fixes: e498eb713604 ("drm/amd/display: Add support for hw_state logging via debugfs") CC: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-12drm/amd: Add DM DMCU supportDavid Francis
DMCU (Display Microcontroller Unit) is a GPU chip involved in eDP features like Adaptive Backlight Modulation and Panel Self Refresh. DC is already fully equipped to initialize DMCU as long as the firmware is loaded. At the moment only the raven firmware is available. A single .bin file is loaded by the kernel's loading mechanism and split into two ucodes according to the header. DMCU is optional, so if the firmware is not found, no error or warning is raised. Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-12drm/amd: Add PSP DMCU supportDavid Francis
DMCU (Display Microcontroller Unit) is a GPU chip involved in eDP features like Adaptive Backlight Modulation and Panel Self Refresh. PSP is already equipped to handle DMCU firmware loading, all that is needed is to translate between the new DMCU ucode ID and the equivalent psp_gfx_fw_type. Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-12drm/amd: Add ucode DMCU supportDavid Francis
DMCU (Display Microcontroller Unit) is a GPU chip involved in eDP features like Adaptive Backlight Modulation and Panel Self Refresh. DMCU has two pieces of firmware: the ERAM and the interrupt vectors, which must be loaded seperately. To this end, the DMCU firmware has a custom header and parsing logic similar to MEC, to extract the two ucodes from a single struct firmware. Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-12drm/amdgpu: Move fault hash table to amdgpu vmOak Zeng
In stead of share one fault hash table per device, make it per vm. This can avoid inter-process lock issue when fault hash table is full. Change-Id: I5d1281b7c41eddc8e26113e010516557588d3708 Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Suggested-by: Christian Konig <Christian.Koenig@amd.com> Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian Konig <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-12drm/amdgpu: move cs dependencies front a bitChunming Zhou
cs dependencies handling doesn't need in vm resv Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-12drm/amdgpu: try allocating VRAM as power of twoChristian König
Try to allocate VRAM in power of two sizes and only fallback to vram split sizes if that fails. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-12Merge branch 'nfp-flower-fixes'David S. Miller
Jakub Kicinski says: ==================== nfp: flower: fixes for flower offload Two fixes for flower matching and tunnel encap. Pieter fixes VLAN matching if the entire VLAN id is masked out and match is only performed on the PCP field. Louis adds validation of tunnel flags for encap, most importantly we should not offload actions on IPv6 tunnels if it's not supported. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12nfp: flower: reject tunnel encap with ipv6 outer headers for offloadingLouis Peens
This fixes a bug where ipv6 tunnels would report that it is getting offloaded to hardware but would actually be rejected by hardware. Fixes: b27d6a95a70d ("nfp: compile flower vxlan tunnel set actions") Signed-off-by: Louis Peens <louis.peens@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12nfp: flower: fix vlan match by checking both vlan id and vlan pcpPieter Jansen van Vuuren
Previously we only checked if the vlan id field is present when trying to match a vlan tag. The vlan id and vlan pcp field should be treated independently. Fixes: 5571e8c9f241 ("nfp: extend flower matching capabilities") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12tipc: check return value of __tipc_dump_start()Cong Wang
When __tipc_dump_start() fails with running out of memory, we have no reason to continue, especially we should avoid calling tipc_dump_done(). Fixes: 8f5c5fcf3533 ("tipc: call start and done ops directly in __tipc_nl_compat_dumpit()") Reported-and-tested-by: syzbot+3f8324abccfbf8c74a9f@syzkaller.appspotmail.com Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12Merge branch 'qeth-fixes'David S. Miller
Julian Wiedmann says: ==================== s390/qeth: fixes 2018-09-12 please apply the following qeth fixes for -net. Patch 1 resolves a regression in an error path, while patch 2 enables the SG support by default that was newly introduced with 4.19. Patch 3 takes care of a longstanding problem with large-order allocations, and patch 4 fixes a potential out-of-bounds access. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12s390/qeth: don't dump past end of unknown HW headerJulian Wiedmann
For inbound data with an unsupported HW header format, only dump the actual HW header. We have no idea how much payload follows it, and what it contains. Worst case, we dump past the end of the Inbound Buffer and access whatever is located next in memory. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12s390/qeth: use vzalloc for QUERY OAT bufferWenjia Zhang
qeth_query_oat_command() currently allocates the kernel buffer for the SIOC_QETH_QUERY_OAT ioctl with kzalloc. So on systems with fragmented memory, large allocations may fail (eg. the qethqoat tool by default uses 132KB). Solve this issue by using vzalloc, backing the allocation with non-contiguous memory. Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12s390/qeth: switch on SG by default for IQD devicesJulian Wiedmann
Scatter-gather transmit brings a nice performance boost. Considering the rather large MTU sizes at play, it's also totally the Right Thing To Do. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12s390/qeth: indicate error when netdev allocation failsJulian Wiedmann
Bailing out on allocation error is nice, but we also need to tell the ccwgroup core that creating the qeth groupdev failed. Fixes: d3d1b205e89f ("s390/qeth: allocate netdevice early") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12bpf: btf: Fix end boundary calculation for type sectionMartin KaFai Lau
The end boundary math for type section is incorrect in btf_check_all_metas(). It just happens that hdr->type_off is always 0 for now because there are only two sections (type and string) and string section must be at the end (ensured in btf_parse_str_sec). However, type_off may not be 0 if a new section would be added later. This patch fixes it. Fixes: f80442a4cd18 ("bpf: btf: Change how section is supported in btf_header") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-12x86/efi: Load fixmap GDT in efi_call_phys_epilog() before setting %cr3Guenter Roeck
Commit eeb89e2bb1ac ("x86/efi: Load fixmap GDT in efi_call_phys_epilog()") moved loading the fixmap in efi_call_phys_epilog() after load_cr3() since it was assumed to be more logical. Turns out this is incorrect: In efi_call_phys_prolog(), the gdt with its physical address is loaded first, and when the %cr3 is reloaded in _epilog from initial_page_table to swapper_pg_dir again the gdt is no longer mapped. This results in a triple fault if an interrupt occurs after load_cr3() and before load_fixmap_gdt(0). Calling load_fixmap_gdt(0) first restores the execution order prior to commit eeb89e2bb1ac and fixes the problem. Fixes: eeb89e2bb1ac ("x86/efi: Load fixmap GDT in efi_call_phys_epilog()") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: linux-efi@vger.kernel.org Cc: Andy Lutomirski <luto@amacapital.net> Cc: Joerg Roedel <jroedel@suse.de> Link: https://lkml.kernel.org/r/1536689892-21538-1-git-send-email-linux@roeck-us.net
2018-09-12x86/xen: Disable CPU0 hotplug for Xen PVJuergen Gross
Xen PV guests don't allow CPU0 hotplug, so disable it. Signed-off-by: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boris.ostrovsky@oracle.com Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20180912174122.24282-1-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-09-12Merge tag 'perf-urgent-for-mingo-4.19-20180912' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix finding a symbol by name when multiple maps use the same backing DSO, so we must first see if that symbol name is in the DSO, then see if it is inside the range of addresses for that specific map (Adrian Hunter) - Update the tools copies of UAPI headers, which silences the warnings emitted when building the tools and in some cases, like for the new KVM ioctls, results in 'perf trace' being able to translate that ioctl number to a string (Arnaldo Carvalho de Melo) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-09-12tracing/Makefile: Fix handling redefinition of CC_FLAGS_FTRACEPaulo Zanoni
As a Kernel developer, I make heavy use of "make targz-pkg" in order to locally compile and remotely install my development Kernels. The nice feature I rely on is that after a normal "make", "make targz-pkg" only generates the tarball without having to recompile everything. That was true until commit f28bc3c32c05 ("tracing: Handle CC_FLAGS_FTRACE more accurately"). After it, running "make targz-pkg" after "make" will recompile the whole Kernel tree, making my development workflow much slower. The Kernel is choosing to recompile everything because it claims the command line has changed. A diff of the .cmd files show a repeated -mfentry in one of the files. That is because "make targz-pkg" calls "make modules_install" and the environment is already populated with the exported variables, CC_FLAGS_FTRACE being one of them. Then, -mfentry gets duplicated because it is not protected behind an ifndef block, like -pg. To complicate the problem a little bit more, architectures can define their own version CC_FLAGS_FTRACE, so our code not only has to consider recursive Makefiles, but also architecture overrides. So in this patch we move CC_FLAGS_FTRACE up and unconditionally define it to -pg. Then we let the architecture Makefiles possibly override it, and finally append the extra options later. This ensures the variable is always fully redefined at each invocation so recursive Makefiles don't keep appending, and hopefully it maintains the intended behavior on how architectures can override the defaults.. Thanks Steven Rostedt and Vasily Gorbik for the help on this regression. Cc: Michal Marek <michal.lkml@markovi.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: linux-kbuild@vger.kernel.org Fixes: commit f28bc3c32c05 ("tracing: Handle CC_FLAGS_FTRACE more accurately") Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-09-12Merge tag 'riscv-for-linus-4.19-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V fix from Palmer Dabbelt: "This contains what I hope to be the last RISC-V patch for 4.19. It fixes a bug in our initramfs support by removing some broken and obselete code" * tag 'riscv-for-linus-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: riscv: Do not overwrite initrd_start and initrd_end
2018-09-12Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three fixes, all in drivers (qedi and iscsi target) so no wider impact even if the code changes are a bit extensive" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qedi: Add the CRC size within iSCSI NVM image scsi: iscsi: target: Fix conn_ops double free scsi: iscsi: target: Set conn->sess to NULL when iscsi_login_set_conn_values fails
2018-09-12efi/libstub/arm: default EFI_ARMSTUB_DTB_LOADER to yScott Branden
Default EFI_ARMSTUB_DTB_LOADER to y to allow the dtb= command line parameter to function with efi loader. Required for development purposes and to boot on existing bootloaders that do not support devicetree provided by the firmware or by the bootloader. Fixes: 3d7ee348aa41 ("efi/libstub/arm: Add opt-in Kconfig option ...") Signed-off-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-09-12cifs: integer overflow in in SMB2_ioctl()Dan Carpenter
The "le32_to_cpu(rsp->OutputOffset) + *plen" addition can overflow and wrap around to a smaller value which looks like it would lead to an information leak. Fixes: 4a72dafa19ba ("SMB2 FSCTL and IOCTL worker function") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> CC: Stable <stable@vger.kernel.org>
2018-09-12CIFS: fix wrapping bugs in num_entries()Dan Carpenter
The problem is that "entryptr + next_offset" and "entryptr + len + size" can wrap. I ended up changing the type of "entryptr" because it makes the math easier when we don't have to do so much casting. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org>
2018-09-12cifs: prevent integer overflow in nxt_dir_entry()Dan Carpenter
The "old_entry + le32_to_cpu(pDirInfo->NextEntryOffset)" can wrap around so I have added a check for integer overflow. Reported-by: Dr Silvio Cesare of InfoSect <silvio.cesare@gmail.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org>
2018-09-12drm/fb-helper: Remove set but not used variable 'connector_funcs'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/drm_fb_helper.c: In function 'drm_pick_crtcs': drivers/gpu/drm/drm_fb_helper.c:2373:43: warning: variable 'connector_funcs' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1536722130-108819-1-git-send-email-yuehaibing@huawei.com
2018-09-12drm/sun4i: fix build failure with CONFIG_DRM_SUN8I_MIXER=mMaxime Ripard
Having DRM_SUN4I built-in but DRM_SUN8I_MIXER as a loadable module results in a link error, as we try to access a symbol from the sun8i_tcon_top.ko module: ERROR: "sun8i_tcon_top_de_config" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined! ERROR: "sun8i_tcon_top_set_hdmi_src" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined! ERROR: "sun8i_tcon_top_of_table" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined! This solves the problem by adding a silent symbol for the tcon_top module, building it as a separate module in exactly the cases that we need it, but in a way that it is reachable by the other modules. Fixes: cf77d79b4e29 ("drm/sun4i: tcon: Add another way for matching mixers with tcon") Fixes: 0305189afb32 ("drm/sun4i: tcon: Add support for R40 TCON") Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Matt Hart <matthew.hart@linaro.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180911113325.11024-1-maxime.ripard@bootlin.com
2018-09-12KVM: s390: Make huge pages unavailable in ucontrol VMsJanosch Frank
We currently do not notify all gmaps when using gmap_pmdp_xchg(), due to locking constraints. This makes ucontrol VMs, which is the only VM type that creates multiple gmaps, incompatible with huge pages. Also we would need to hold the guest_table_lock of all gmaps that have this vmaddr maped to synchronize access to the pmd. ucontrol VMs are rather exotic and creating a new locking concept is no easy task. Hence we return EINVAL when trying to active KVM_CAP_S390_HPAGE_1M and report it as being not available when checking for it. Fixes: a4499382 ("KVM: s390: Add huge page enablement control") Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20180801112508.138159-1-frankja@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2018-09-12s390/mm: Check for valid vma before zapping in gmap_discardJanosch Frank
Userspace could have munmapped the area before doing unmapping from the gmap. This would leave us with a valid vmaddr, but an invalid vma from which we would try to zap memory. Let's check before using the vma. Fixes: 1e133ab296f3 ("s390/mm: split arch/s390/mm/pgtable.c") Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Message-Id: <20180816082432.78828-1-frankja@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2018-09-12sound: don't call skl_init_chip() to reset intel skl socYu Zhao
Internally, skl_init_chip() calls snd_hdac_bus_init_chip() which 1) sets bus->chip_init to prevent multiple entrances before device is stopped; 2) enables interrupt. We shouldn't use it for the purpose of resetting device only because 1) when we really want to initialize device, we won't be able to do so; 2) we are ready to handle interrupt yet, and kernel crashes when interrupt comes in. Rename azx_reset() to snd_hdac_bus_reset_link(), and use it to reset device properly. Fixes: 60767abcea3d ("ASoC: Intel: Skylake: Reset the controller in probe") Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-12sound: enable interrupt after dma buffer initializationYu Zhao
In snd_hdac_bus_init_chip(), we enable interrupt before snd_hdac_bus_init_cmd_io() initializing dma buffers. If irq has been acquired and irq handler uses the dma buffer, kernel may crash when interrupt comes in. Fix the problem by postponing enabling irq after dma buffer initialization. And warn once on null dma buffer pointer during the initialization. Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-30 05:14:18 +0000