| Age | Commit message (Collapse) | Author |
|---|
|
Currently, calling clone3() with CLONE_NEWTIME in clone_args->flags
fails with -EINVAL. This is because CLONE_NEWTIME intersects with
CSIGNAL. However, CSIGNAL was deprecated when clone3 was introduced in
commit 7f192e3cd316 ("fork: add clone3"), allowing re-use of that part
of clone flags.
Fix this by explicitly allowing CLONE_NEWTIME in clone3_args_valid. This
is also in line with the respective check in check_unshare_flags which
allow CLONE_NEWTIME for unshare().
Fixes: 769071ac9f20 ("ns: Introduce Time Namespace")
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
The watch_queue_set_size() allocation error paths return the ret value
set via the prior pipe_resize_ring() call, which will always be zero.
As a result, IOC_WATCH_QUEUE_SET_SIZE callers such as "keyctl watch"
fail to detect kernel wqueue->notes allocation failures and proceed to
KEYCTL_WATCH_KEY, with any notifications subsequently lost.
Fixes: c73be61cede58 ("pipe: Add general notification queue support")
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
As lockdep properly warns, we should not be locking i_rwsem while having
transactions started as the proper lock ordering used by all directory
handling operations is i_rwsem -> transaction start. Fix the lock
ordering by moving the locking of the directory earlier in
ext4_rename().
Reported-by: syzbot+9d16c39efb5fade84574@syzkaller.appspotmail.com
Fixes: 0813299c586b ("ext4: Fix possible corruption when moving a directory")
Link: https://syzkaller.appspot.com/bug?extid=9d16c39efb5fade84574
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230301141004.15087-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
64BIT is part of the incompatible feature set, update the comment
accordingly.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20230301133842.671821-1-tudor.ambarus@linaro.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Since the default ext4 group desc size is 64 now (assuming that the
64-bit feature is enbled). And the size mentioned in this doc is 64 too.
Change it to 64.
Signed-off-by: Wu Bo <bo.wu@vivo.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20230222013525.14748-1-bo.wu@vivo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Apparently syzbot figured out that issuing this FSMAP call:
struct fsmap_head cmd = {
.fmh_count = ...;
.fmh_keys = {
{ .fmr_device = /* ext4 dev */, .fmr_physical = 0, },
{ .fmr_device = /* ext4 dev */, .fmr_physical = 0, },
},
...
};
ret = ioctl(fd, FS_IOC_GETFSMAP, &cmd);
Produces this crash if the underlying filesystem is a 1k-block ext4
filesystem:
kernel BUG at fs/ext4/ext4.h:3331!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 3 PID: 3227965 Comm: xfs_io Tainted: G W O 6.2.0-rc8-achx
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:ext4_mb_load_buddy_gfp+0x47c/0x570 [ext4]
RSP: 0018:ffffc90007c03998 EFLAGS: 00010246
RAX: ffff888004978000 RBX: ffffc90007c03a20 RCX: ffff888041618000
RDX: 0000000000000000 RSI: 00000000000005a4 RDI: ffffffffa0c99b11
RBP: ffff888012330000 R08: ffffffffa0c2b7d0 R09: 0000000000000400
R10: ffffc90007c03950 R11: 0000000000000000 R12: 0000000000000001
R13: 00000000ffffffff R14: 0000000000000c40 R15: ffff88802678c398
FS: 00007fdf2020c880(0000) GS:ffff88807e100000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffd318a5fe8 CR3: 000000007f80f001 CR4: 00000000001706e0
Call Trace:
<TASK>
ext4_mballoc_query_range+0x4b/0x210 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
ext4_getfsmap_datadev+0x713/0x890 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
ext4_getfsmap+0x2b7/0x330 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
ext4_ioc_getfsmap+0x153/0x2b0 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
__ext4_ioctl+0x2a7/0x17e0 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
__x64_sys_ioctl+0x82/0xa0
do_syscall_64+0x2b/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fdf20558aff
RSP: 002b:00007ffd318a9e30 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000000200c0 RCX: 00007fdf20558aff
RDX: 00007fdf1feb2010 RSI: 00000000c0c0583b RDI: 0000000000000003
RBP: 00005625c0634be0 R08: 00005625c0634c40 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fdf1feb2010
R13: 00005625be70d994 R14: 0000000000000800 R15: 0000000000000000
For GETFSMAP calls, the caller selects a physical block device by
writing its block number into fsmap_head.fmh_keys[01].fmr_device.
To query mappings for a subrange of the device, the starting byte of the
range is written to fsmap_head.fmh_keys[0].fmr_physical and the last
byte of the range goes in fsmap_head.fmh_keys[1].fmr_physical.
IOWs, to query what mappings overlap with bytes 3-14 of /dev/sda, you'd
set the inputs as follows:
fmh_keys[0] = { .fmr_device = major(8, 0), .fmr_physical = 3},
fmh_keys[1] = { .fmr_device = major(8, 0), .fmr_physical = 14},
Which would return you whatever is mapped in the 12 bytes starting at
physical offset 3.
The crash is due to insufficient range validation of keys[1] in
ext4_getfsmap_datadev. On 1k-block filesystems, block 0 is not part of
the filesystem, which means that s_first_data_block is nonzero.
ext4_get_group_no_and_offset subtracts this quantity from the blocknr
argument before cracking it into a group number and a block number
within a group. IOWs, block group 0 spans blocks 1-8192 (1-based)
instead of 0-8191 (0-based) like what happens with larger blocksizes.
The net result of this encoding is that blocknr < s_first_data_block is
not a valid input to this function. The end_fsb variable is set from
the keys that are copied from userspace, which means that in the above
example, its value is zero. That leads to an underflow here:
blocknr = blocknr - le32_to_cpu(es->s_first_data_block);
The division then operates on -1:
offset = do_div(blocknr, EXT4_BLOCKS_PER_GROUP(sb)) >>
EXT4_SB(sb)->s_cluster_bits;
Leaving an impossibly large group number (2^32-1) in blocknr.
ext4_getfsmap_check_keys checked that keys[0].fmr_physical and
keys[1].fmr_physical are in increasing order, but
ext4_getfsmap_datadev adjusts keys[0].fmr_physical to be at least
s_first_data_block. This implies that we have to check it again after
the adjustment, which is the piece that I forgot.
Reported-by: syzbot+6be2b977c89f79b6b153@syzkaller.appspotmail.com
Fixes: 4a4956249dac ("ext4: fix off-by-one fsmap error on 1k block filesystems")
Link: https://syzkaller.appspot.com/bug?id=79d5768e9bfe362911ac1a5057a36fc6b5c30002
Cc: stable@vger.kernel.org
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/Y+58NPTH7VNGgzdd@magnolia
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
A significant number of xfstests can cause ext4 to log one or more
warning messages when they are run on a test file system where the
inline_data feature has been enabled. An example:
"EXT4-fs warning (device vdc): ext4_dirblock_csum_set:425: inode
#16385: comm fsstress: No space for directory leaf checksum. Please
run e2fsck -D."
The xfstests include: ext4/057, 058, and 307; generic/013, 051, 068,
070, 076, 078, 083, 232, 269, 270, 390, 461, 475, 476, 482, 579, 585,
589, 626, 631, and 650.
In this situation, the warning message indicates a bug in the code that
performs the RENAME_WHITEOUT operation on a directory entry that has
been stored inline. It doesn't detect that the directory is stored
inline, and incorrectly attempts to compute a dirent block checksum on
the whiteout inode when creating it. This attempt fails as a result
of the integrity checking in get_dirent_tail (usually due to a failure
to match the EXT4_FT_DIR_CSUM magic cookie), and the warning message
is then emitted.
Fix this by simply collecting the inlined data state at the time the
search for the source directory entry is performed. Existing code
handles the rest, and this is sufficient to eliminate all spurious
warning messages produced by the tests above. Go one step further
and do the same in the code that resets the source directory entry in
the event of failure. The inlined state should be present in the
"old" struct, but given the possibility of a race there's no harm
in taking a conservative approach and getting that information again
since the directory entry is being reread anyway.
Fixes: b7ff91fd030d ("ext4: find old entry again if failed to rename whiteout")
Cc: stable@kernel.org
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230210173244.679890-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definitions to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230209-kobj_type-ext4-v1-1-6865fb05c1f8@weissschuh.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When writing a page from an encrypted file that is using
filesystem-layer encryption (not inline encryption), ext4 encrypts the
pagecache page into a bounce page, then writes the bounce page.
It also passes the bounce page to wbc_account_cgroup_owner(). That's
incorrect, because the bounce page is a newly allocated temporary page
that doesn't have the memory cgroup of the original pagecache page.
This makes wbc_account_cgroup_owner() not account the I/O to the owner
of the pagecache page as it should.
Fix this by always passing the pagecache page to
wbc_account_cgroup_owner().
Fixes: 001e4a8775f6 ("ext4: implement cgroup writeback support")
Cc: stable@vger.kernel.org
Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203005503.141557-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
damon_pa_mark_accessed_or_deactivate()
damon_pa_mark_accessed_or_deactivate() is accessing a folio via
folio_nr_pages() after folio_put() for the folio has invoked. Fix it.
Link: https://lkml.kernel.org/r/20230304193949.296391-3-sj@kernel.org
Fixes: f70da5ee8fe1 ("mm/damon: convert damon_pa_mark_accessed_or_deactivate() to use folios")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon/paddr: Fix folio-use-after-put bugs".
There are two folio accesses after folio_put() in mm/damon/paddr.c file.
Fix those.
This patch (of 2):
damon_pa_young() is accessing a folio via folio_size() after folio_put()
for the folio has invoked. Fix it.
Link: https://lkml.kernel.org/r/20230304193949.296391-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230304193949.296391-2-sj@kernel.org
Fixes: 397b0c3a584b ("mm/damon/paddr: remove folio_sz field from damon_pa_access_chk_result")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: <stable@vger.kernel.org> [6.2.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When buffered write fails to copy data into underlying page cache page,
ocfs2_write_end_nolock() just zeroes out and dirties the page. This can
leave dirty page beyond EOF and if page writeback tries to write this page
before write succeeds and expands i_size, page gets into inconsistent
state where page dirty bit is clear but buffer dirty bits stay set
resulting in page data never getting written and so data copied to the
page is lost. Fix the problem by invalidating page beyond EOF after
failed write.
Link: https://lkml.kernel.org/r/20230302153843.18499-1-jack@suse.cz
Fixes: 6dbf7bb55598 ("fs: Don't invalidate page buffers in block_write_full_page()")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When we have locked more than one folios, we cannot wait the lock or bit
(e.g., page lock, buffer head lock, writeback bit) synchronously.
Otherwise deadlock may be triggered. This make it hard to batch the
synchronous migration directly.
This patch re-enables batching synchronous migration via trying to migrate
in batch asynchronously firstly. And any folios that are failed to be
migrated asynchronously will be migrated synchronously one by one.
Test shows that this can restore the TLB flushing batching performance for
synchronous migration effectively.
Link: https://lkml.kernel.org/r/20230303030155.160983-4-ying.huang@intel.com
Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: "Xu, Pengfei" <pengfei.xu@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Tejun Heo <tj@kernel.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To simplify the code logic and reduce the line number.
Link: https://lkml.kernel.org/r/20230303030155.160983-3-ying.huang@intel.com
Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Xu, Pengfei" <pengfei.xu@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Tejun Heo <tj@kernel.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "migrate_pages: fix deadlock in batched synchronous
migration", v2.
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei. Analysis shows that if we have locked some other
folios except the one we are migrating, it's not safe in general to wait
synchronously, for example, to wait the writeback to complete or wait to
lock the buffer head.
So 1/3 fixes the deadlock in a simple way, where the batching support for
the synchronous migration is disabled. The change is straightforward and
easy to be understood. While 3/3 re-introduce the batching for
synchronous migration via trying to migrate asynchronously in batch
optimistically, then fall back to migrate synchronously one by one for
fail-to-migrate folios. Test shows that this can restore the TLB flushing
batching performance for synchronous migration effectively.
This patch (of 3):
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei! For example, in the following deadlock trace
snippet,
INFO: task kworker/u4:0:9 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u4:0 state:D stack:0 pid:9 ppid:2 flags:0x00004000
Workqueue: loop4 loop_rootcg_workfn
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? __pfx_wake_page_function+0x10/0x10
__filemap_get_folio+0x73d/0x770
shmem_get_folio_gfp+0x1fd/0xc80
shmem_write_begin+0x91/0x220
generic_perform_write+0x10e/0x2e0
__generic_file_write_iter+0x17e/0x290
? generic_write_checks+0x12b/0x1a0
generic_file_write_iter+0x97/0x180
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_readv_writev+0x13c/0x210
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_write+0xf6/0x330
vfs_iter_write+0x46/0x70
loop_process_work+0x723/0xfe0
loop_rootcg_workfn+0x28/0x40
process_one_work+0x3cc/0x8d0
worker_thread+0x66/0x630
? __pfx_worker_thread+0x10/0x10
kthread+0x153/0x190
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x50
</TASK>
INFO: task repro:1023 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:repro state:D stack:0 pid:1023 ppid:360 flags:0x00004004
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? compaction_alloc+0x77/0x1150
? __pfx_wake_page_function+0x10/0x10
folio_wait_bit+0x30/0x40
folio_wait_writeback+0x2e/0x1e0
migrate_pages_batch+0x555/0x1ac0
? __pfx_compaction_alloc+0x10/0x10
? __pfx_compaction_free+0x10/0x10
? __this_cpu_preempt_check+0x17/0x20
? lock_is_held_type+0xe6/0x140
migrate_pages+0x100e/0x1180
? __pfx_compaction_free+0x10/0x10
? __pfx_compaction_alloc+0x10/0x10
compact_zone+0xe10/0x1b50
? lock_is_held_type+0xe6/0x140
? check_preemption_disabled+0x80/0xf0
compact_node+0xa3/0x100
? __sanitizer_cov_trace_const_cmp8+0x1c/0x30
? _find_first_bit+0x7b/0x90
sysctl_compaction_handler+0x5d/0xb0
proc_sys_call_handler+0x29d/0x420
proc_sys_write+0x2b/0x40
vfs_write+0x3a3/0x780
ksys_write+0xb7/0x180
__x64_sys_write+0x26/0x30
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f3a2471f59d
RSP: 002b:00007ffe567f7288 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a2471f59d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005
RBP: 00007ffe567f72a0 R08: 0000000000000010 R09: 0000000000000010
R10: 0000000000000010 R11: 0000000000000217 R12: 00000000004012e0
R13: 00007ffe567f73e0 R14: 0000000000000000 R15: 0000000000000000
</TASK>
The page migration task has held the lock of the shmem folio A, and is
waiting the writeback of the folio B of the file system on the loop block
device to complete. While the loop worker task which writes back the
folio B is waiting to lock the shmem folio A, because the folio A backs
the folio B in the loop device. Thus deadlock is triggered.
In general, if we have locked some other folios except the one we are
migrating, it's not safe to wait synchronously, for example, to wait the
writeback to complete or wait to lock the buffer head.
To fix the deadlock, in this patch, we avoid to batch the page migration
except for MIGRATE_ASYNC mode. In MIGRATE_ASYNC mode, synchronous waiting
is avoided.
The fix can be improved further. We will do that as soon as possible.
Link: https://lkml.kernel.org/r/20230303030155.160983-1-ying.huang@intel.com
Link: https://lore.kernel.org/linux-mm/87a6c8c-c5c1-67dc-1e32-eb30831d6e3d@google.com/
Link: https://lore.kernel.org/linux-mm/874jrg7kke.fsf@yhuang6-desk2.ccr.corp.intel.com/
Link: https://lore.kernel.org/linux-mm/20230227110614.dngdub2j3exr6dfp@quack3/
Link: https://lkml.kernel.org/r/20230303030155.160983-2-ying.huang@intel.com
Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: "Xu, Pengfei" <pengfei.xu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Tejun Heo <tj@kernel.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
I'm no longer employed by Canonical which results in email bouncing so add
an entry to my personal email address.
Link: https://lkml.kernel.org/r/20230301090132.280475-1-alexghiti@rivosinc.com
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
I recently sent a patch to map Dikshita's old CAF address to his current
one @ Qualcomm. It turned out however, that he has two of them, with the
@quicinc.com one meant for upstream contributions. Fix it.
Link: https://lkml.kernel.org/r/20230301110012.1290379-1-konrad.dybcio@linaro.org
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Dikshita Agarwal <quic_dikshita@quicinc.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Vasily Averin <vasily.averin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update to my current employer:
https://research.tuni.fi/nisec/
Link: https://lkml.kernel.org/r/20230301235443.6663-1-jarkko@kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Vasily Averin <vasily.averin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, we'd lose the userfaultfd-wp marker when PTE-mapping a huge
zeropage, resulting in the next write faults in the PMD range not
triggering uffd-wp events.
Various actions (partial MADV_DONTNEED, partial mremap, partial munmap,
partial mprotect) could trigger this. However, most importantly,
un-protecting a single sub-page from the userfaultfd-wp handler when
processing a uffd-wp event will PTE-map the shared huge zeropage and lose
the uffd-wp bit for the remainder of the PMD.
Let's properly propagate the uffd-wp bit to the PMDs.
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <stdbool.h>
#include <inttypes.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <poll.h>
#include <pthread.h>
#include <sys/mman.h>
#include <sys/syscall.h>
#include <sys/ioctl.h>
#include <linux/userfaultfd.h>
static size_t pagesize;
static int uffd;
static volatile bool uffd_triggered;
#define barrier() __asm__ __volatile__("": : :"memory")
static void uffd_wp_range(char *start, size_t size, bool wp)
{
struct uffdio_writeprotect uffd_writeprotect;
uffd_writeprotect.range.start = (unsigned long) start;
uffd_writeprotect.range.len = size;
if (wp) {
uffd_writeprotect.mode = UFFDIO_WRITEPROTECT_MODE_WP;
} else {
uffd_writeprotect.mode = 0;
}
if (ioctl(uffd, UFFDIO_WRITEPROTECT, &uffd_writeprotect)) {
fprintf(stderr, "UFFDIO_WRITEPROTECT failed: %d\n", errno);
exit(1);
}
}
static void *uffd_thread_fn(void *arg)
{
static struct uffd_msg msg;
ssize_t nread;
while (1) {
struct pollfd pollfd;
int nready;
pollfd.fd = uffd;
pollfd.events = POLLIN;
nready = poll(&pollfd, 1, -1);
if (nready == -1) {
fprintf(stderr, "poll() failed: %d\n", errno);
exit(1);
}
nread = read(uffd, &msg, sizeof(msg));
if (nread <= 0)
continue;
if (msg.event != UFFD_EVENT_PAGEFAULT ||
!(msg.arg.pagefault.flags & UFFD_PAGEFAULT_FLAG_WP)) {
printf("FAIL: wrong uffd-wp event fired\n");
exit(1);
}
/* un-protect the single page. */
uffd_triggered = true;
uffd_wp_range((char *)(uintptr_t)msg.arg.pagefault.address,
pagesize, false);
}
return arg;
}
static int setup_uffd(char *map, size_t size)
{
struct uffdio_api uffdio_api;
struct uffdio_register uffdio_register;
pthread_t thread;
uffd = syscall(__NR_userfaultfd,
O_CLOEXEC | O_NONBLOCK | UFFD_USER_MODE_ONLY);
if (uffd < 0) {
fprintf(stderr, "syscall() failed: %d\n", errno);
return -errno;
}
uffdio_api.api = UFFD_API;
uffdio_api.features = UFFD_FEATURE_PAGEFAULT_FLAG_WP;
if (ioctl(uffd, UFFDIO_API, &uffdio_api) < 0) {
fprintf(stderr, "UFFDIO_API failed: %d\n", errno);
return -errno;
}
if (!(uffdio_api.features & UFFD_FEATURE_PAGEFAULT_FLAG_WP)) {
fprintf(stderr, "UFFD_FEATURE_WRITEPROTECT missing\n");
return -ENOSYS;
}
uffdio_register.range.start = (unsigned long) map;
uffdio_register.range.len = size;
uffdio_register.mode = UFFDIO_REGISTER_MODE_WP;
if (ioctl(uffd, UFFDIO_REGISTER, &uffdio_register) < 0) {
fprintf(stderr, "UFFDIO_REGISTER failed: %d\n", errno);
return -errno;
}
pthread_create(&thread, NULL, uffd_thread_fn, NULL);
return 0;
}
int main(void)
{
const size_t size = 4 * 1024 * 1024ull;
char *map, *cur;
pagesize = getpagesize();
map = mmap(NULL, size, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANON, -1, 0);
if (map == MAP_FAILED) {
fprintf(stderr, "mmap() failed\n");
return -errno;
}
if (madvise(map, size, MADV_HUGEPAGE)) {
fprintf(stderr, "MADV_HUGEPAGE failed\n");
return -errno;
}
if (setup_uffd(map, size))
return 1;
/* Read the whole range, populating zeropages. */
madvise(map, size, MADV_POPULATE_READ);
/* Write-protect the whole range. */
uffd_wp_range(map, size, true);
/* Make sure uffd-wp triggers on each page. */
for (cur = map; cur < map + size; cur += pagesize) {
uffd_triggered = false;
barrier();
/* Trigger a write fault. */
*cur = 1;
barrier();
if (!uffd_triggered) {
printf("FAIL: uffd-wp did not trigger\n");
return 1;
}
}
printf("PASS: uffd-wp triggered\n");
return 0;
}
Link: https://lkml.kernel.org/r/20230302175423.589164-1-david@redhat.com
Fixes: e06f1e1dd499 ("userfaultfd: wp: enabled write protection in userfaultfd API")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
By checking huge_pte_none(), we incorrectly classify PTE markers as
"present". Instead, check huge_pte_none_mostly(), classifying PTE markers
the same as if the PTE were completely blank.
PTE markers, unlike other kinds of swap entries, don't reference any
physical page and don't indicate that a physical page was mapped
previously. As such, treat them as non-present for the sake of mincore().
Link: https://lkml.kernel.org/r/20230302222404.175303-1-jthoughton@google.com
Fixes: 5c041f5d1f23 ("mm: teach core mm about pte markers")
Signed-off-by: James Houghton <jthoughton@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We can often end up inserting a block group item, for a new block group,
with a wrong value for the used bytes field.
This happens if for the new allocated block group, in the same transaction
that created the block group, we have tasks allocating extents from it as
well as tasks removing extents from it.
For example:
1) Task A creates a metadata block group X;
2) Two extents are allocated from block group X, so its "used" field is
updated to 32K, and its "commit_used" field remains as 0;
3) Transaction commit starts, by some task B, and it enters
btrfs_start_dirty_block_groups(). There it tries to update the block
group item for block group X, which currently has its "used" field with
a value of 32K. But that fails since the block group item was not yet
inserted, and so on failure update_block_group_item() sets the
"commit_used" field of the block group back to 0;
4) The block group item is inserted by task A, when for example
btrfs_create_pending_block_groups() is called when releasing its
transaction handle. This results in insert_block_group_item() inserting
the block group item in the extent tree (or block group tree), with a
"used" field having a value of 32K, but without updating the
"commit_used" field in the block group, which remains with value of 0;
5) The two extents are freed from block X, so its "used" field changes
from 32K to 0;
6) The transaction commit by task B continues, it enters
btrfs_write_dirty_block_groups() which calls update_block_group_item()
for block group X, and there it decides to skip the block group item
update, because "used" has a value of 0 and "commit_used" has a value
of 0 too.
As a result, we end up with a block item having a 32K "used" field but
no extents allocated from it.
When this issue happens, a btrfs check reports an error like this:
[1/7] checking root items
[2/7] checking extents
block group [1104150528 1073741824] used 39796736 but extent items used 0
ERROR: errors found in extent allocation tree or chunk allocation
(...)
Fix this by making insert_block_group_item() update the block group's
"commit_used" field.
Fixes: 7248e0cebbef ("btrfs: skip update of block group item if used bytes are the same")
CC: stable@vger.kernel.org # 6.2+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
/sys/block/<disk>/hidden is undocumented. Document it.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230303084323.228098-1-sagi@grimberg.me
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
I was intending to make all the Netlink Spec code BSD-3-Clause
to ease the adoption but it appears that:
- I fumbled the uAPI and used "GPL WITH uAPI note" there
- it gives people pause as they expect GPL in the kernel
As suggested by Chuck re-license under dual. This gives us benefit
of full BSD freedom while fulfilling the broad "kernel is under GPL"
expectations.
Link: https://lore.kernel.org/all/20230304120108.05dd44c5@kernel.org/
Link: https://lore.kernel.org/r/20230306200457.3903854-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Map all my old email addresses to current address.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/r/20230306194405.108236-1-stephen@networkplumber.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Map Maxim's old corporate addresses to his personal one.
Link: https://lore.kernel.org/r/20230306192018.3894988-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cb_context should be freed on the error path in nfc_se_io as stated by
commit 25ff6f8a5a3b ("nfc: fix memory leak of se_io context in
nfc_genl_se_io").
Make the error path in nfc_se_io unwind everything in reverse order, i.e.
free the cb_context after unlocking the device.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230306212650.230322-1-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With older compilers like gcc-9, the calculation of the vlan
priority field causes a false-positive warning from the byteswap:
In file included from drivers/net/ethernet/intel/ice/ice_tc_lib.c:4:
drivers/net/ethernet/intel/ice/ice_tc_lib.c: In function 'ice_parse_cls_flower':
include/uapi/linux/swab.h:15:15: error: integer overflow in expression '(int)(short unsigned int)((int)match.key-><U67c8>.<U6698>.vlan_priority << 13) & 57344 & 255' of type 'int' results in '0' [-Werror=overflow]
15 | (((__u16)(x) & (__u16)0x00ffU) << 8) | \
| ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
include/uapi/linux/swab.h:106:2: note: in expansion of macro '___constant_swab16'
106 | ___constant_swab16(x) : \
| ^~~~~~~~~~~~~~~~~~
include/uapi/linux/byteorder/little_endian.h:42:43: note: in expansion of macro '__swab16'
42 | #define __cpu_to_be16(x) ((__force __be16)__swab16((x)))
| ^~~~~~~~
include/linux/byteorder/generic.h:96:21: note: in expansion of macro '__cpu_to_be16'
96 | #define cpu_to_be16 __cpu_to_be16
| ^~~~~~~~~~~~~
drivers/net/ethernet/intel/ice/ice_tc_lib.c:1458:5: note: in expansion of macro 'cpu_to_be16'
1458 | cpu_to_be16((match.key->vlan_priority <<
| ^~~~~~~~~~~
After a change to be16_encode_bits(), the code becomes more
readable to both people and compilers, which avoids the warning.
Fixes: 34800178b302 ("ice: Add support for VLAN priority filters in switchdev")
Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
There were few smatch warnings reported by Dan:
- ice_vsi_cfg_xdp_txqs can return 0 instead of ret, which is cleaner
- return values in ice_vsi_cfg_def were ignored
- in ice_vsi_rebuild return value was ignored in case rebuild failed,
it was a never reached code, however, rewrite it for clarity.
- ice_vsi_cfg_tc can return 0 instead of ret
Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When creating the TLV to send to the FW for configuring DSCP mode PFC,the
PFCENABLE field was being masked with a 4 bit mask (0xF), but this is an 8
bit bitmask for enabled classes for PFC. This means that traffic classes
4-7 could not be enabled for PFC.
Remove the mask completely, as it is not necessary, as we are assigning 8
bits to an 8 bit field.
Fixes: 2a87bd73e50d ("ice: Add DSCP support")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
[Why]
Currently, the clk manager matches SocVoltage with voltage from
fused settings (dfPstate clock table). And then corresponding clocks
are selected.
However in certain situations, this leads to clk manager not
including at least one entry with highest supported clock setting.
[How]
Update the clk manager to include at least one entry with highest
supported clock setting.
Reviewed-by: Pavle Kotarac <pavle.kotarac@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Swapnil Patel <Swapnil.Patel@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Support EccInfoTable which includes umc ras error count and
error address.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Don't need to query error count and error address on harvest umc nodes.
v2: Fix code bug, use active_mask instead of harvsest_config
and remove unnecessary argument in LOOP macro.
v3: Leave adev->gmc.num_umc unchanged.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is useful to understand the bpc defaults and
support of a driver.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Reviewed-By: Joshua Ashton <joshua@froggi.es>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113162428.33874-3-harry.wentland@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The EDID of an HDR display defines EOTFs that are supported
by the display and can be set in the HDR metadata infoframe.
Userspace is expected to read the EDID and set an appropriate
HDR_OUTPUT_METADATA.
In drm_parse_hdr_metadata_block the kernel reads the supported
EOTFs from the EDID and stores them in the
drm_connector->hdr_sink_metadata. While doing so it also
filters the EOTFs to the EOTFs the kernel knows about.
When an HDR_OUTPUT_METADATA is set it then checks to
make sure the EOTF is a supported EOTF. In cases where
the kernel doesn't know about a new EOTF this check will
fail, even if the EDID advertises support.
Since it is expected that userspace reads the EDID to understand
what the display supports it doesn't make sense for DRM to block
an HDR_OUTPUT_METADATA if it contains an EOTF the kernel doesn't
understand.
This comes with the added benefit of future-proofing metadata
support. If the spec defines a new EOTF there is no need to
update DRM and an compositor can immediately make use of it.
Bug: https://gitlab.freedesktop.org/wayland/weston/-/issues/609
v2: Distinguish EOTFs defind in kernel and ones defined
in EDID in the commit description (Pekka)
v3: Rebase; drm_hdmi_infoframe_set_hdr_metadata moved
to drm_hdmi_helper.c
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-By: Joshua Ashton <joshua@froggi.es>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113162428.33874-2-harry.wentland@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Chris pointed out that some bonehead, *cough* me *cough*, added two
mutex_locks() to the SiFive errata patching. The second was meant to
have been a mutex_unlock().
This results in errors such as
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030
Oops [#1]
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted
6.2.0-rc1-starlight-00079-g9493e6f3ce02 #229
Hardware name: BeagleV Starlight Beta (DT)
epc : __schedule+0x42/0x500
ra : schedule+0x46/0xce
epc : ffffffff8065957c ra : ffffffff80659a80 sp : ffffffff81203c80
gp : ffffffff812d50a0 tp : ffffffff8120db40 t0 : ffffffff81203d68
t1 : 0000000000000001 t2 : 4c45203a76637369 s0 : ffffffff81203cf0
s1 : ffffffff8120db40 a0 : 0000000000000000 a1 : ffffffff81213958
a2 : ffffffff81213958 a3 : 0000000000000000 a4 : 0000000000000000
a5 : ffffffff80a1bd00 a6 : 0000000000000000 a7 : 0000000052464e43
s2 : ffffffff8120db41 s3 : ffffffff80a1ad00 s4 : 0000000000000000
s5 : 0000000000000002 s6 : ffffffff81213938 s7 : 0000000000000000
s8 : 0000000000000000 s9 : 0000000000000001 s10: ffffffff812d7204
s11: ffffffff80d3c920 t3 : 0000000000000001 t4 : ffffffff812e6dd7
t5 : ffffffff812e6dd8 t6 : ffffffff81203bb8
status: 0000000200000100 badaddr: 0000000000000030 cause: 000000000000000d
[<ffffffff80659a80>] schedule+0x46/0xce
[<ffffffff80659dce>] schedule_preempt_disabled+0x16/0x28
[<ffffffff8065ae0c>] __mutex_lock.constprop.0+0x3fe/0x652
[<ffffffff8065b138>] __mutex_lock_slowpath+0xe/0x16
[<ffffffff8065b182>] mutex_lock+0x42/0x4c
[<ffffffff8000ad94>] sifive_errata_patch_func+0xf6/0x18c
[<ffffffff80002b92>] _apply_alternatives+0x74/0x76
[<ffffffff80802ee8>] apply_boot_alternatives+0x3c/0xfa
[<ffffffff80803cb0>] setup_arch+0x60c/0x640
[<ffffffff80800926>] start_kernel+0x8e/0x99c
---[ end trace 0000000000000000 ]---
Reported-by: Chris Hofstaedtler <zeha@debian.org>
Fixes: 9493e6f3ce02 ("RISC-V: take text_mutex during alternative patching")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230302174154.970746-1-conor@kernel.org
[Palmer: pick up Geert's bug report from the thread]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Commit 596ff4a09b89 ("cpumask: re-introduce constant-sized cpumask
optimizations") changed cpumask_setall() to use "bitmap_set()" instead
of "bitmap_fill()", because bitmap_fill() would explicitly set all the
bits of a constant sized small bitmap, and that's exactly what we don't
want: we want to only set bits up to 'nr_cpu_ids', which is what
"bitmap_set()" does.
However, Yury correctly points out that while "bitmap_set()" does indeed
only set bits up to the required bitmap size, it doesn't _clear_ bits
above that size, so the upper bits would still not have well-defined
values.
Now, none of this should really matter, since any bits set past
'nr_cpu_ids' should always be ignored in the first place. Yes, the bit
scanning functions might return them as a result, but since users should
always consider the ">= nr_cpu_ids" condition to mean "no more bits",
that shouldn't have any actual effect (see previous commit 8ca09d5fa354
"cpumask: fix incorrect cpumask scanning result checks").
But let's just do it right, the way the code was _intended_ to work. We
have had enough lazy code that works but bites us in the *rse later
(again, see previous commit) that there's no reason to not just do this
properly.
It turns out that "bitmap_fill()" gets this all right for the complex
case, and really only fails for the inlined optimized case that just
fills the whole word. And while we could just fix bitmap_fill() to use
the proper last word mask, there's two issues with that:
- the cpumask case wants to do the _optimization_ based on "NR_CPUS is
a small constant", but then wants to do the actual bit _fill_ based
on "nr_cpu_ids" that isn't necessarily that same constant
- we have lots of non-cpumask users of bitmap_fill(), and while they
hopefully don't care, and probably would want the proper semantics
anyway ("only set bits up to the limit"), I do not want the cpumask
changes to impact other parts
So this ends up just doing the single-word optimization by hand in the
cpumask code. If our cpumask is fundamentally limited to a single word,
just do the proper "fill in that word" exactly. And if it's the more
complex multi-word case, then the generic bitmap_fill() will DTRT.
This is all an example of how our bitmap function optimizations really
are somewhat broken. They conflate the "this is size of the bitmap"
optimizations with the actual bit(s) we want to set.
In many cases we really want to have the two be separate things:
sometimes we base our optimizations on the size of the whole bitmap ("I
know this whole bitmap fits in a single word, so I'll just use
single-word accesses"), and sometimes we base them on the bit we are
looking at ("this is just acting on bits that are in the first word, so
I'll use single-word accesses").
Notice how the end result of the two optimizations are the same, but the
way we get to them are quite different.
And all our cpumask optimization games are really about that fundamental
distinction, and we'd often really want to pass in both the "this is the
bit I'm working on" (which _can_ be a small constant but might be
variable), and "I know it's in this range even if it's variable" (based
on CONFIG_NR_CPUS).
So this cpumask_setall() implementation just makes that explicit. It
checks the "I statically know the size is small" using the known static
size of the cpumask (which is what that 'small_cpumask_bits' is all
about), but then sets the actual bits using the exact number of cpus we
have (ie 'nr_cpumask_bits')
Of course, in a perfect world, the compiler would have done all the
range analysis (possibly with help from us just telling it that
"this value is always in this range"), and would do all of this for us.
But that is not the world we live in.
While we dream of that perfect world, this does that manual logic to
make it all work out. And this was a very long explanation for a small
code change that shouldn't even matter.
Reported-by: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/lkml/ZAV9nGG9e1%2FrV+L%2F@yury-laptop/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
kbuild reports:
>> Warning: Documentation/mm/hugetlbfs_reserv.rst references a file that doesn't exist: Documentation/mm/hugetlbpage.rst
>> Warning: Documentation/translations/zh_CN/mm/hugetlbfs_reserv.rst references a file that doesn't exist: Documentation/mm/hugetlbpage.rst
Fix the filename to be 'Documentation/admin-guide/mm/hugetlbpage.rst'.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202302231854.sKlCmx9K-lkp@intel.com/
Fixes: ee86588960e2 ("docs/mm: remove useless markup")
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Link: https://lore.kernel.org/r/20230224100306.2287696-2-rppt@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
kbuild reports:
>> Warning: Documentation/mm/physical_memory.rst references a file that doesn't exist: Documentation/admin-guide/mm/memory_hotplug.rst
Fix the filename to be 'Documentation/admin-guide/mm/memory-hotplug.rst'.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202302231311.567PAoS2-lkp@intel.com/
Fixes: 353c7dd636ed ("docs/mm: Physical Memory: remove useless markup")
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Link: https://lore.kernel.org/r/20230224100306.2287696-1-rppt@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The "^0" syntax is no longer needed to fast-forward to a mainline commit;
take that out and add --ff-only to force an error if fast-forward is not
possible.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
[jc: rewrote changelog]
Link: https://lore.kernel.org/r/20230228134657.1797871-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Following the C text in the file, add a mention about the Rust
programming language, the currently supported compiler and
the edition used (similar to the "dialect" mention for C).
Similarly, add a mention about the unstable features used (similar
to the "extensions" mentions for C).
In addition, add some links to complement the information.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20230306191712.230658-2-ojeda@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The Intel compiler support has been removed in commit 95207db8166a
("Remove Intel compiler support").
Thus remove its mention in the Documentation too.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230306191712.230658-1-ojeda@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The details for struct dentry_operations member d_weak_revalidate is
missing a "d_" prefix.
Fixes: af96c1e304f7 ("docs: filesystems: vfs: Convert vfs.txt to RST")
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20230227184042.2375235-1-development@efficientek.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This commit 7d2078310cbf ("dt-bindings: arm: move cpu-capacity to a
shared loation") updates some references about capacity-dmips-mhz
property in this document.
The list of architectures using capacity-dmips-mhz omits RISC-V, so
supplements it here.
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com> # English
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230227105941.2749193-1-suagrfillet@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Flole observes this WARNING on occasion:
[1210423.486503] WARNING: CPU: 8 PID: 1524732 at fs/ext4/ext4_jbd2.c:75 ext4_journal_check_start+0x68/0xb0
Reported-by: <flole@flole.de>
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217123
Fixes: 73da852e3831 ("nfsd: use vfs_iter_read/write")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add the following Telit FE990 composition:
0x1080: tty, adb, rmnet, tty, tty, tty, tty
Signed-off-by: Enrico Sau <enrico.sau@gmail.com>
Link: https://lore.kernel.org/r/20230306120528.198842-1-enrico.sau@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FE990
0x1081 composition in order to avoid bind error.
Signed-off-by: Enrico Sau <enrico.sau@gmail.com>
Link: https://lore.kernel.org/r/20230306115933.198259-1-enrico.sau@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If disk_scan_partitions() is called with 'FMODE_EXCL',
blkdev_get_by_dev() will be called without 'FMODE_EXCL', however, follow
blkdev_put() is still called with 'FMODE_EXCL', which will cause
'bd_holders' counter to leak.
Fix the problem by using the right mode for blkdev_put().
Reported-by: syzbot+2bcc0d79e548c4f62a59@syzkaller.appspotmail.com
Link: https://lore.kernel.org/lkml/f9649d501bc8c3444769418f6c26263555d9d3be.camel@linux.ibm.com/T/
Tested-by: Julian Ruess <julianr@linux.ibm.com>
Fixes: e5cfefa97bcc ("block: fix scan partition for exclusively open device again")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Restore ctnetlink zero mark in events and dump, from Ivan Delalande.
2) Fix deadlock due to missing disabled bh in tproxy, from Florian Westphal.
3) Safer maximum chain load in conntrack, from Eric Dumazet.
* 'main' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: conntrack: adopt safer max chain length
netfilter: tproxy: fix deadlock due to missing BH disable
netfilter: ctnetlink: revert to dumping mark regardless of event type
====================
Link: https://lore.kernel.org/r/20230307100424.2037-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Initialize shift variable in mlxplat_mlxcpld_verify_bus_topology()
to 0 to avoid the following compile error:
drivers/platform/x86/mlx-platform.c:6013
mlxplat_mlxcpld_verify_bus_topology() error: uninitialized symbol 'shift'.
Fixes: 50b823fdd357 ("platform: mellanox: mlx-platform: Move bus shift assignment out of the loop")
Cc: Vadim Pasternak <vadimp@nvidia.com>
Cc: Michael Shych <michaelsh@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230307105842.286118-1-hdegoede@redhat.com
|
|
Add the INT347E GPIO lookup table to the board data for the Surface
Go 3. This is necessary to allow the ov7251 IR camera to probe
properly on that platform.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230302102611.314341-1-dan.scally@ideasonboard.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
