| Age | Commit message (Collapse) | Author |
|---|
|
Commit
ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex")
narrowed the command mutex scope to snp_send_guest_request(). However,
GET_REPORT, GET_DERIVED_KEY, and GET_EXT_REPORT share the req structure in
snp_guest_dev. Without the mutex protection, concurrent requests can overwrite
each other's data. Fix it by dynamically allocating the request structure.
Fixes: ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex")
Closes: https://github.com/AMDESE/AMDSEV/issues/265
Reported-by: andreas.stuehrk@yaxi.tech
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250307013700.437505-2-aik@amd.com
|
|
Xen doesn't offer MSR_FAM10H_MMIO_CONF_BASE to all guests. This results
in the following warning:
unchecked MSR access error: RDMSR from 0xc0010058 at rIP: 0xffffffff8101d19f (xen_do_read_msr+0x7f/0xa0)
Call Trace:
xen_read_msr+0x1e/0x30
amd_get_mmconfig_range+0x2b/0x80
quirk_amd_mmconfig_area+0x28/0x100
pnp_fixup_device+0x39/0x50
__pnp_add_device+0xf/0x150
pnp_add_device+0x3d/0x100
pnpacpi_add_device_handler+0x1f9/0x280
acpi_ns_get_device_callback+0x104/0x1c0
acpi_ns_walk_namespace+0x1d0/0x260
acpi_get_devices+0x8a/0xb0
pnpacpi_init+0x50/0x80
do_one_initcall+0x46/0x2e0
kernel_init_freeable+0x1da/0x2f0
kernel_init+0x16/0x1b0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
based on quirks for a "PNP0c01" device. Treating MMCFG as disabled is the
right course of action, so no change is needed there.
This was most likely exposed by fixing the Xen MSR accessors to not be
silently-safe.
Fixes: 3fac3734c43a ("xen/pv: support selecting safe/unsafe msr accesses")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250307002846.3026685-1-andrew.cooper3@citrix.com
|
|
The fix to atomically read the pipe head and tail state when not holding
the pipe mutex has caused a number of headaches due to the size change
of the involved types.
It turns out that we don't have _that_ many places that access these
fields directly and were affected, but we have more than we strictly
should have, because our low-level helper functions have been designed
to have intimate knowledge of how the pipes work.
And as a result, that random noise of direct 'pipe->head' and
'pipe->tail' accesses makes it harder to pinpoint any actual potential
problem spots remaining.
For example, we didn't have a "is the pipe full" helper function, but
instead had a "given these pipe buffer indexes and this pipe size, is
the pipe full". That's because some low-level pipe code does actually
want that much more complicated interface.
But most other places literally just want a "is the pipe full" helper,
and not having it meant that those places ended up being unnecessarily
much too aware of this all.
It would have been much better if only the very core pipe code that
cared had been the one aware of this all.
So let's fix it - better late than never. This just introduces the
trivial wrappers for "is this pipe full or empty" and to get how many
pipe buffers are used, so that instead of writing
if (pipe_full(pipe->head, pipe->tail, pipe->max_usage))
the places that literally just want to know if a pipe is full can just
say
if (pipe_is_full(pipe))
instead. The existing trivial cases were converted with a 'sed' script.
This cuts down on the places that access pipe->head and pipe->tail
directly outside of the pipe code (and core splice code) quite a lot.
The splice code in particular still revels in doing the direct low-level
accesses, and the fuse fuse_dev_splice_write() code also seems a bit
unnecessarily eager to go very low-level, but it's at least a bit better
than it used to be.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull drm fixes from Dave Airlie:
"Fixes across the board, mostly xe and imagination with some amd and
misc others.
The xe fixes are mostly hmm related, though there are some others in
there as well, nothing really stands out otherwise.
The nouveau Kconfig to select FW_CACHE is in this, which we discussed
a while back.
nouveau:
- rely on fw caching Kconfig fix
imagination:
- avoid deadlock on fence release
- fix fence initialisation
- fix timestamps firmware traces
scheduler:
- fix include guard
bochs:
- dpms fix
i915:
- bump max stream count to match pipes
xe:
- Remove double page flip on initial plane
- Properly setup userptr pfn_flags_mask
- Fix GT "for each engine" workarounds
- Fix userptr races and missed validations
- Userptr invalid page access fixes
- Cleanup some style nits
amdgpu:
- Fix NULL check in DC code
- SMU 14 fix
amdkfd:
- Fix NULL check in queue validation
radeon:
- RS400 HyperZ fix"
* tag 'drm-fixes-2025-03-07' of https://gitlab.freedesktop.org/drm/kernel: (22 commits)
drm/bochs: Fix DPMS regression
drm/xe/userptr: Unmap userptrs in the mmu notifier
drm/xe/hmm: Don't dereference struct page pointers without notifier lock
drm/xe/hmm: Style- and include fixes
drm/xe: Add staging tree for VM binds
drm/xe: Fix fault mode invalidation with unbind
drm/xe/vm: Fix a misplaced #endif
drm/xe/vm: Validate userptr during gpu vma prefetching
drm/amd/pm: always allow ih interrupt from fw
drm/radeon: Fix rs400_gpu_init for ATI mobility radeon Xpress 200M
drm/amdkfd: Fix NULL Pointer Dereference in KFD queue
drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params
drm/xe: Fix GT "for each engine" workarounds
drm/xe/userptr: properly setup pfn_flags_mask
drm/i915/mst: update max stream count to match number of pipes
drm/xe: Remove double pageflip
drm/sched: Fix preprocessor guard
drm/imagination: Fix timestamps in firmware traces
drm/imagination: only init job done fences once
drm/imagination: Hold drm_gem_gpuva lock for unmap
...
|
|
Commit 5f89154e8e9e3445f9b59 ("block: Use enum to define RQF_x bit
indexes") converted the RQF flags to an anonymous enum, which was
a beneficial change. This patch goes one step further by naming the enum
as "rqf_flags".
This naming enables exporting these flags to BPF clients, eliminating
the need to duplicate these flags in BPF code. Instead, BPF clients can
now access the same kernel-side values through CO:RE (Compile Once, Run
Everywhere), as shown in this example:
rqf_stats = bpf_core_enum_value(enum rqf_flags, __RQF_STATS)
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20250306-rqf_flags-v1-1-bbd64918b406@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.14-2025-03-06:
amdgpu:
- Fix NULL check in DC code
- SMU 14 fix
amdkfd:
- Fix NULL check in queue validation
radeon:
- RS400 HyperZ fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306193424.27413-1-alexander.deucher@amd.com
|
|
Pull bcachefs fixes from Kent Overstreet:
- Fix a compatibility issue: we shouldn't be setting incompat feature
bits unless explicitly requested
- Fix another bug where the journal alloc/resize path could spuriously
fail with -BCH_ERR_open_buckets_empty
- Copygc shouldn't run on read-only devices: fragmentation isn't an
issue if we're not currently writing to a given device, and it may
not have anywhere to move the data to
* tag 'bcachefs-2025-03-06' of git://evilpiepirate.org/bcachefs:
bcachefs: copygc now skips non-rw devices
bcachefs: Fix bch2_dev_journal_alloc() spuriously failing
bcachefs: Don't set BCH_FEATURE_incompat_version_field unless requested
|
|
There's no point in doing copygc on non-rw devices: the fragmentation
doesn't matter if we're not writing to them, and we may not have
anywhere to put the data on our other devices.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously, we fixed journal resize spuriousl failing with
-BCH_ERR_open_buckets_empty, but initial journal allocation was missed
because it didn't invoke the "block on allocator" loop at all.
Factor out the "loop on allocator" code to fix that.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Remove double page flip on initial plane (Maarten)
- Properly setup userptr pfn_flags_mask (Auld)
- Fix GT "for each engine" workarounds (Tvrtko)
- Fix userptr races and missed validations (Thomas, Brost)
- Userptr invalid page access fixes (Thomas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z8ni6w3tskCFL11O@intel.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- DP MST fix (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z8ng8NjmRGiVcb5t@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A Kconfig fix for nouveau, locking and timestamp fixes for imagination,
a header guard fix for sched and a DPMS regression fix for bochs.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306-antelope-of-imminent-anger-bca19e@houat
|
|
The 5-level paging code parses the command line to look for the 'no5lvl'
string, and does so very early, before sanitize_boot_params() has been
called and has been given the opportunity to wipe bogus data from the
fields in boot_params that are not covered by struct setup_header, and
are therefore supposed to be initialized to zero by the bootloader.
This triggers an early boot crash when using syslinux-efi to boot a
recent kernel built with CONFIG_X86_5LEVEL=y and CONFIG_EFI_STUB=n, as
the 0xff padding that now fills the unused PE/COFF header is copied into
boot_params by the bootloader, and interpreted as the top half of the
command line pointer.
Fix this by sanitizing the boot_params before use. Note that there is no
harm in calling this more than once; subsequent invocations are able to
spot that the boot_params have already been cleaned up.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org> # v6.1+
Link: https://lore.kernel.org/r/20250306155915.342465-2-ardb+git@google.com
Closes: https://lore.kernel.org/all/202503041549.35913.ulrich.gemkow@ikr.uni-stuttgart.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and wireless.
Current release - new code bugs:
- wifi: nl80211: disable multi-link reconfiguration
Previous releases - regressions:
- gso: fix ownership in __udp_gso_segment
- wifi: iwlwifi:
- fix A-MSDU TSO preparation
- free pages allocated when failing to build A-MSDU
- ipv6: fix dst ref loop in ila lwtunnel
- mptcp: fix 'scheduling while atomic' in
mptcp_pm_nl_append_new_local_addr
- bluetooth: add check for mgmt_alloc_skb() in
mgmt_device_connected()
- ethtool: allow NULL nlattrs when getting a phy_device
- eth: be2net: fix sleeping while atomic bugs in
be_ndo_bridge_getlink
Previous releases - always broken:
- core: support TCP GSO case for a few missing flags
- wifi: mac80211:
- fix vendor-specific inheritance
- cleanup sta TXQs on flush
- llc: do not use skb_get() before dev_queue_xmit()
- eth: ipa: nable checksum for IPA_ENDPOINT_AP_MODEM_{RX,TX}
for v4.7"
* tag 'net-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits)
net: ipv6: fix missing dst ref drop in ila lwtunnel
net: ipv6: fix dst ref loop in ila lwtunnel
mctp i3c: handle NULL header address
net: dsa: mt7530: Fix traffic flooding for MMIO devices
net-timestamp: support TCP GSO case for a few missing flags
vlan: enforce underlying device type
mptcp: fix 'scheduling while atomic' in mptcp_pm_nl_append_new_local_addr
net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device
ppp: Fix KMSAN uninit-value warning with bpf
net: ipa: Enable checksum for IPA_ENDPOINT_AP_MODEM_{RX,TX} for v4.7
net: ipa: Fix QSB data for v4.7
net: ipa: Fix v4.7 resource group names
net: hns3: make sure ptp clock is unregister and freed if hclge_ptp_get_cycle returns an error
wifi: nl80211: disable multi-link reconfiguration
net: dsa: rtl8366rb: don't prompt users for LED control
be2net: fix sleeping while atomic bugs in be_ndo_bridge_getlink
llc: do not use skb_get() before dev_queue_xmit()
wifi: cfg80211: regulatory: improve invalid hints checking
caif_virtio: fix wrong pointer check in cfv_probe()
net: gso: fix ownership in __udp_gso_segment
...
|
|
Pull smb fixes from Steve French:
"Five SMB server fixes, two related client fixes, and minor MAINTAINERS
update:
- Two SMB3 lock fixes fixes (including use after free and bug on fix)
- Fix to race condition that can happen in processing IPC responses
- Four ACL related fixes: one related to endianness of num_aces, and
two related fixes to the checks for num_aces (for both client and
server), and one fixing missing check for num_subauths which can
cause memory corruption
- And minor update to email addresses in MAINTAINERS file"
* tag 'v6.14-rc5-smb3-fixes' of git://git.samba.org/ksmbd:
cifs: fix incorrect validation for num_aces field of smb_acl
ksmbd: fix incorrect validation for num_aces field of smb_acl
smb: common: change the data type of num_aces to le16
ksmbd: fix bug on trap in smb2_lock
ksmbd: fix use-after-free in smb2_lock
ksmbd: fix type confusion via race condition when using ipc_msg_send_request
ksmbd: fix out-of-bounds in parse_sec_desc()
MAINTAINERS: update email address in cifs and ksmbd entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fixes from Namjae Jeon:
- Optimize new cluster allocation by correctly find empty entry slot
- Add a check to prevent excessive bitmap clearing due to invalid
data size of file/dir entry
- Fix incorrect error return for zero-byte writes
* tag 'exfat-for-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: add a check for invalid data size
exfat: short-circuit zero-byte writes in exfat_file_write_iter
exfat: fix soft lockup in exfat_clear_bitmap
exfat: fix just enough dentries but allocate a new cluster to dir
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix spelling mistakes in idmappings.rst
- Fix RCU warnings in override_creds()/revert_creds()
- Create new pid namespaces with default limit now that pid_max is
namespaced
* tag 'vfs-6.14-rc6.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
pid: Do not set pid_max in new pid namespaces
doc: correcting two prefix errors in idmappings.rst
cred: Fix RCU warnings in override/revert_creds
|
|
This was another case that Rasmus pointed out where the direct access to
the pipe head and tail pointers broke on 32-bit configurations due to
the type changes.
As with the pipe FIONREAD case, fix it by using the appropriate helper
functions that deal with the right pipe index sizing.
Reported-by: Rasmus Villemoes <ravi@prevas.dk>
Link: https://lore.kernel.org/all/878qpi5wz4.fsf@prevas.dk/
Fixes: 3d252160b818 ("fs/pipe: Read pipe->{head,tail} atomically outside pipe->mutex")Cc: Oleg >
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Rasmus points out that we do indeed have other cases of breakage from
the type changes that were introduced on 32-bit targets in order to read
the pipe head and tail values atomically (commit 3d252160b818: "fs/pipe:
Read pipe->{head,tail} atomically outside pipe->mutex").
Fix it up by using the proper helper functions that now deal with the
pipe buffer index types properly. This makes the code simpler and more
obvious.
The compiler does the CSE and loop hoisting of the pipe ring size
masking that we used to do manually, so open-coding this was never a
good idea.
Reported-by: Rasmus Villemoes <ravi@prevas.dk>
Link: https://lore.kernel.org/all/87cyeu5zgk.fsf@prevas.dk/
Fixes: 3d252160b818 ("fs/pipe: Read pipe->{head,tail} atomically outside pipe->mutex")Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
That's what 'pipe_full()' does, so it's more consistent. But more
importantly it gets the type limits right when the pipe head and tail
are no longer necessarily 'unsigned int'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Resources should be released only after all threads that utilize them
have been destroyed.
This commit ensures that resources are not released prematurely by waiting
for the associated workqueue to complete before deallocating them.
Cc: stable <stable@kernel.org>
Fixes: b9aa02ca39a4 ("usb: typec: ucsi: Add polling mechanism for partner tasks like alt mode checking")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250305111739.1489003-2-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When used on Huawei hisi platforms, Prolific Mass Storage Card Reader
which the VID:PID is in 067b:2731 might fail to enumerate at boot time
and doesn't work well with LPM enabled, combination quirks:
USB_QUIRK_DELAY_INIT + USB_QUIRK_NO_LPM
fixed the problems.
Signed-off-by: Miao Li <limiao@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250304070757.139473-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Unplugging a USB3.0 webcam from Etron hosts while streaming results
in errors like this:
[ 2.646387] xhci_hcd 0000:03:00.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 18 comp_code 13
[ 2.646446] xhci_hcd 0000:03:00.0: Looking for event-dma 000000002fdf8630 trb-start 000000002fdf8640 trb-end 000000002fdf8650
[ 2.646560] xhci_hcd 0000:03:00.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 18 comp_code 13
[ 2.646568] xhci_hcd 0000:03:00.0: Looking for event-dma 000000002fdf8660 trb-start 000000002fdf8670 trb-end 000000002fdf8670
Etron xHC generates two transfer events for the TRB if an error is
detected while processing the last TRB of an isoc TD.
The first event can be any sort of error (like USB Transaction or
Babble Detected, etc), and the final event is Success.
The xHCI driver will handle the TD after the first event and remove it
from its internal list, and then print an "Transfer event TRB DMA ptr
not part of current TD" error message after the final event.
Commit 5372c65e1311 ("xhci: process isoc TD properly when there was a
transaction error mid TD.") is designed to address isoc transaction
errors, but unfortunately it doesn't account for this scenario.
This issue is similar to the XHCI_SPURIOUS_SUCCESS case where a success
event follows a 'short transfer' event, but the TD the event points to
is already given back.
Expand the spurious success 'short transfer' event handling to cover
the spurious success after error on Etron hosts.
Kuangyi Chiang reported this issue and submitted a different solution
based on using error_mid_td. This commit message is mostly taken
from that patch.
Reported-by: Kuangyi Chiang <ki.chiang65@gmail.com>
Closes: https://lore.kernel.org/linux-usb/20241028025337.6372-6-ki.chiang65@gmail.com/
Tested-by: Kuangyi Chiang <ki.chiang65@gmail.com>
Tested-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-16-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Extract a block of code copied from inc_enq() into a separate function
and call it from inc_enq() and the other function which used this code.
Remove the pointless 'next' variable which only aliases ring->enqueue.
Note: I don't know if any 0.95 xHC ever reached series production, but
"AMD 0.96 host" appears to be the "Llano" family APU. Example dmesg at
https://linux-hardware.org/?probe=79d5cfd4fd&log=dmesg
pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
hcc params 0x014042c3 hci version 0x96 quirks 0x0000000000000608
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-15-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Two clearly different specimens of NEC uPD720200 (one with start/stop
bug, one without) were seen to cause IOMMU faults after some Missed
Service Errors. Faulting address is immediately after a transfer ring
segment and patched dynamic debug messages revealed that the MSE was
received when waiting for a TD near the end of that segment:
[ 1.041954] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ffa08fe0
[ 1.042120] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09000 flags=0x0000]
[ 1.042146] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09040 flags=0x0000]
It gets even funnier if the next page is a ring segment accessible to
the HC. Below, it reports MSE in segment at ff1e8000, plows through a
zero-filled page at ff1e9000 and starts reporting events for TRBs in
page at ff1ea000 every microframe, instead of jumping to seg ff1e6000.
[ 7.041671] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0
[ 7.041999] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0
[ 7.042011] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042028] xhci_hcd: All TDs skipped for slot 1 ep 2. Clear skip flag.
[ 7.042134] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042138] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31
[ 7.042144] xhci_hcd: Looking for event-dma 00000000ff1ea040 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.042259] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042262] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31
[ 7.042266] xhci_hcd: Looking for event-dma 00000000ff1ea050 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
At some point completion events change from Isoch Buffer Overrun to
Short Packet and the HC finally finds cycle bit mismatch in ff1ec000.
[ 7.098130] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13
[ 7.098132] xhci_hcd: Looking for event-dma 00000000ff1ecc50 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.098254] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13
[ 7.098256] xhci_hcd: Looking for event-dma 00000000ff1ecc60 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.098379] xhci_hcd: Overrun event on slot 1 ep 2
It's possible that data from the isochronous device were written to
random buffers of pending TDs on other endpoints (either IN or OUT),
other devices or even other HCs in the same IOMMU domain.
Lastly, an error from a different USB device on another HC. Was it
caused by the above? I don't know, but it may have been. The disk
was working without any other issues and generated PCIe traffic to
starve the NEC of upstream BW and trigger those MSEs. The two HCs
shared one x1 slot by means of a commercial "PCIe splitter" board.
[ 7.162604] usb 10-2: reset SuperSpeed USB device number 3 using xhci_hcd
[ 7.178990] sd 9:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=DRIVER_OK cmd_age=0s
[ 7.179001] sd 9:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 04 02 ae 00 00 02 00 00
[ 7.179004] I/O error, dev sdb, sector 67284480 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0
Fortunately, it appears that this ridiculous bug is avoided by setting
the chain bit of Link TRBs on isochronous rings. Other ancient HCs are
known which also expect the bit to be set and they ignore Link TRBs if
it's not. Reportedly, 0.95 spec guaranteed that the bit is set.
The bandwidth-starved NEC HC running a 32KB/uframe UVC endpoint reports
tens of MSEs per second and runs into the bug within seconds. Chaining
Link TRBs allows the same workload to run for many minutes, many times.
No negative side effects seen in UVC recording and UAC playback with a
few devices at full speed, high speed and SuperSpeed.
The problem doesn't reproduce on the newer Renesas uPD720201/uPD720202
and on old Etron EJ168 and VIA VL805 (but the VL805 has other bug).
[shorten line length of log snippets in commit messge -Mathias]
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-14-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Ensure that an endpoint halted due to device STALL is not
restarted before a Clear_Feature(ENDPOINT_HALT) request is sent to
the device.
The host side of the endpoint may otherwise be started early by the
'Set TR Deq' command completion handler which is called if dequeue
is moved past a cancelled or halted TD.
Prevent this with a new flag set for bulk and interrupt endpoints
when a Stall Error is received. Clear it in hcd->endpoint_reset()
which is called after Clear_Feature(ENDPOINT_HALT) is sent.
Also add a debug message if a class driver queues a new URB after the
STALL. Note that class driver might not be aware of the STALL
yet when it submits the URB as URBs are given back in BH.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-13-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Function trb_in_td() currently includes debug capabilities that are
triggered when its debug argument is set to true. The only consumer of
these debug capabilities is handle_tx_event(), which calls trb_in_td()
twice, once for its primary functionality and a second time solely for
debugging purposes if the first call returns 'NULL'.
This approach is inefficient and can lead to confusion, as trb_in_td()
executes the same code with identical arguments twice, differing only in
the debug output during the second execution.
To enhance clarity and efficiency, move the debug capabilities out of
trb_in_td() and integrates them directly into handle_tx_event().
This change reduces the argument count of trb_in_td() and ensures that
debug steps are executed only when necessary, streamlining the function's
operation.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-12-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Relocate trb_in_td() and marks it as static, as it's exclusively utilized
in xhci-ring.c. This adjustment lays the groundwork for future rework of
the function.
The function's logic remains unchanged; only its access specifier is
altered to static and a redundant "else" is removed on line 325
(due to checkpatch.pl complaining).
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-11-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The current xHCI driver does not validate whether a page size of 4096
bytes is supported. Address the issue by setting the page size to the
value supported by the xHCI controller, as read from the Page Size
register. In the event of an unexpected value; default to a 4K page size.
Additionally, this commit removes unnecessary debug messages and instead
prints the supported and used page size once.
The xHCI controller supports page sizes of (2^{(n+12)}) bytes, where 'n'
is the Page Size Bit. Only one page size is supported, with a maximum
page size of 128 KB.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ffs() function returns the index of the first set bit, starting from 1.
If no bits are set, it returns zero. This behavior causes an off-by-one
page size in the debug message, as the page size calculation [1]
is zero-based, while ffs() is one-based.
Fix this by subtracting one from the result of ffs(). Note that since
variable 'val' is unsigned, subtracting one from zero will result in the
maximum unsigned integer value. Consequently, the condition 'if (val < 16)'
will still function correctly.
[1], Page size: (2^(n+12)), where 'n' is the set page size bit.
Fixes: 81720ec5320c ("usb: host: xhci: use ffs() in xhci_mem_init()")
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If skipping is deferred to events other than Missed Service Error itsef,
it means we are running on an xHCI 1.0 host and don't know how many TDs
were missed until we reach some ordinary transfer completion event.
And in case of ring xrun, we can't know where the xrun happened either.
If we skip all pending TDs, we may prematurely give back TDs added after
the xrun had occurred, risking data loss or buffer UAF by the xHC.
If we skip none, a driver may become confused and stop working when all
its URBs are missed and appear to be "in flight" forever.
Skip exactly one TD on each xrun event - the first one that was missed,
as we can now be sure that the HC has finished processing it. Provided
that one more TD is queued before any subsequent doorbell ring, it will
become safe to skip another TD by the time we get an xrun again.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
xHCI spec rev. 1.0 allowed the TRB pointer of Missed Service events
to be NULL. Having no idea which of the queued TDs were missed and
which are waiting, we can only set a flag to skip missed TDs later.
But HCs are also allowed to give us pointer to the last missed TRB,
and this became mandatory in spec rev. 1.1 and later.
Use this pointer, if available, to immediately skip all missed TDs.
This reduces latency and risk of skipping-related bugs, because we
can now leave the skip flag cleared for future events.
Handle Missed Service Error events as 'error mid TD', if applicable,
because rev. 1.0 spec excplicitly says so in notes to 4.10.3.2 and
later revs in 4.10.3.2 and 4.11.2.5.2. Notes to 4.9.1 seem to apply.
Tested on ASM1142 and ASM3142 v1.1 xHCs which provide TRB pointers.
Tested on AMD, Etron, Renesas v1.0 xHCs which provide TRB pointers.
Tested on NEC v0.96 and VIA v1.0 xHCs which send a NULL pointer.
Change inspired by a discussion about realtime USB audio.
Link: https://lore.kernel.org/linux-usb/76e1a191-020d-4a76-97f6-237f9bd0ede0@gmx.net/T/
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The TRB pointer of these events points at enqueue at the time of error
occurrence on xHCI 1.1+ HCs or it's NULL on older ones. By the time we
are handling the event, a new TD may be queued at this ring position.
I can trigger this race by rising interrupt moderation to increase IRQ
handling delay. Similar delay may occur naturally due to system load.
If this ever happens after a Missed Service Error, missed TDs will be
skipped and the new TD processed as if it matched the event. It could
be given back prematurely, risking data loss or buffer UAF by the xHC.
Don't complete TDs on xrun events and don't warn if queued TDs don't
match the event's TRB pointer, which can be NULL or a link/no-op TRB.
Don't warn if there are no queued TDs at all.
Now that it's safe, also handle xrun events if the skip flag is clear.
This ensures completion of any TD stuck in 'error mid TD' state right
before the xrun event, which could happen if a driver submits a finite
number of URBs to a buggy HC and then an error occurs on the last TD.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Missed Service Error after an error mid TD means that the failed TD has
already been passed by the xHC without acknowledgment of the final TRB,
a known hardware bug. So don't wait any more and give back the TD.
Reproduced on NEC uPD720200 under conditions of ludicrously bad USB link
quality, confirmed to behave as expected using dynamic debug.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Up until commit d56b0b2ab142 ("usb: xhci: ensure skipped isoc TDs are
returned when isoc ring is stopped") in v6.11, the driver didn't skip
missed isochronous TDs when handling Stoppend and Stopped - Length
Invalid events. Instead, it erroneously cleared the skip flag, which
would cause the ring to get stuck, as future events won't match the
missed TD which is never removed from the queue until it's cancelled.
This buggy logic seems to have been in place substantially unchanged
since the 3.x series over 10 years ago, which probably speaks first
and foremost about relative rarity of this case in normal usage, but
by the spec I see no reason why it shouldn't be possible.
After d56b0b2ab142, TDs are immediately skipped when handling those
Stopped events. This poses a potential problem in case of Stopped -
Length Invalid, which occurs either on completed TDs (likely already
given back) or Link and No-Op TRBs. Such event won't be recognized
as matching any TD (unless it's the rare Link TRB inside a TD) and
will result in skipping all pending TDs, giving them back possibly
before they are done, risking isoc data loss and maybe UAF by HW.
As a compromise, don't skip and don't clear the skip flag on this
kind of event. Then the next event will skip missed TDs. A downside
of not handling Stopped - Length Invalid on a Link inside a TD is
that if the TD is cancelled, its actual length will not be updated
to account for TRBs (silently) completed before the TD was stopped.
I had no luck producing this sequence of completion events so there
is no compelling demonstration of any resulting disaster. It may be
a very rare, obscure condition. The sole motivation for this patch
is that if such unlikely event does occur, I'd rather risk reporting
a cancelled partially done isoc frame as empty than gamble with UAF.
This will be fixed more properly by looking at Stopped event's TRB
pointer when making skipping decisions, but such rework is unlikely
to be backported to v6.12, which will stay around for a few years.
Fixes: d56b0b2ab142 ("usb: xhci: ensure skipped isoc TDs are returned when isoc ring is stopped")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function is a remnant from a previous implementation and is now
redundant. There is no longer a need to search for the dequeue pointer,
as both the TRB and segment dequeue pointers are saved within
'queued_deq_seg' and 'queued_deq_ptr'.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
U2 value is encoded in 256 microsecond intervals, show in microseconds.
U1 value is in microseconds. debug message incorrectly showed "ms"
Unwrap debug messages while we anyway modify them.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
of_parse_phandle_with_fixed_args() requires its caller to
call into of_node_put() on the node pointer from the output
structure, but such a call is currently missing.
Call into of_node_put() to rectify that.
Fixes: 159f8a0209af ("gpio-rcar: Add DT support")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250305163753.34913-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add btrfs_free_chunk_map() to free the memory allocated
by btrfs_alloc_chunk_map() if btrfs_add_chunk_map() fails.
Fixes: 7dc66abb5a47 ("btrfs: use a dedicated data structure for chunk maps")
CC: stable@vger.kernel.org
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pull NVMe fixe from Keith:
"nvme fixes for Linux 6.14
- TCP use after free fix on polling (Sagi)
- Controller memory buffer cleanup fixes (Icenowy)
- Free leaking requests on bad user passthrough commands (Keith)
- TCP error message fix (Maurizio)
- TCP corruption fix on partial PDU (Maurizio)
- TCP memory ordering fix for weakly ordered archs (Meir)
- Type coercion fix on message error for TCP (Dan)"
* tag 'nvme-6.14-2025-03-05' of git://git.infradead.org/nvme:
nvme-tcp: fix signedness bug in nvme_tcp_init_connection()
nvmet-tcp: Fix a possible sporadic response drops in weakly ordered arch
nvme-tcp: fix potential memory corruption in nvme_tcp_recv_pdu()
nvme-tcp: Fix a C2HTermReq error message
nvmet: remove old function prototype
nvme-ioctl: fix leaked requests on mapping error
nvme-pci: skip CMB blocks incompatible with PCI P2P DMA
nvme-pci: clean up CMBMSC when registering CMB fails
nvme-tcp: fix possible UAF in nvme_tcp_poll
|
|
Since commit 5f73e7d0386d ("kbuild: refactor cross-compiling
linux-headers package"), the linux-headers pacman package fails
to build when "O=" is set. The build system complains:
/mnt/chroot/linux/scripts/Makefile.build:41: mnt/chroots/linux-mainline/pacman/linux-upstream/pkg/linux-upstream-headers/usr//lib/modules/6.14.0-rc3-00350-g771dba31fffc/build/scripts/Makefile: No such file or directory
This is because the "srcroot" variable is set to "." and the
"build" variable is set to the absolute path. This makes the
"src" variables point to wrong directory.
Change the "build" variable to a relative path to "." to
fix build.
Fixes: 5f73e7d0386d ("kbuild: refactor cross-compiling linux-headers package")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Add missing skb_dst_drop() to drop reference to the old dst before
adding the new dst to the skb.
Fixes: 79ff2fc31e0f ("ila: Cache a route to translated address")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250305081655.19032-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch follows commit 92191dd10730 ("net: ipv6: fix dst ref loops in
rpl, seg6 and ioam6 lwtunnels") and, on a second thought, the same patch
is also needed for ila (even though the config that triggered the issue
was pathological, but still, we don't want that to happen).
Fixes: 79ff2fc31e0f ("ila: Cache a route to translated address")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250304181039.35951-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
daddr can be NULL if there is no neighbour table entry present,
in that case the tx packet should be dropped.
saddr will usually be set by MCTP core, but check for NULL in case a
packet is transmitted by a different protocol.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Fixes: c8755b29b58e ("mctp i3c: MCTP I3C driver")
Link: https://patch.msgid.link/20250304-mctp-i3c-null-v1-1-4416bbd56540@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
By default fair_server dl_server allocates 5% of the bandwidth to the root
domain. Due to this writing any value less than 5% fails due to -EBUSY:
$ cat /proc/sys/kernel/sched_rt_period_us
1000000
$ echo 49999 > /proc/sys/kernel/sched_rt_runtime_us
-bash: echo: write error: Device or resource busy
$ echo 50000 > /proc/sys/kernel/sched_rt_runtime_us
$
Since the sched_rt_runtime_us allows -1 as the minimum, put this
restriction in the documentation.
One should check average of runtime/period in
/sys/kernel/debug/sched/fair_server/cpuX/* for exact value.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20250306052954.452005-3-sshegde@linux.ibm.com
|
|
The ftrace selftest reported a failure because writing -1 to
sched_rt_runtime_us returns -EBUSY. This happens when the possible
CPUs are different from active CPUs.
Active CPUs are part of one root domain, while remaining CPUs are part
of def_root_domain. Since active cpumask is being used, this results in
cpus=0 when a non active CPUs is used in the loop.
Fix it by looping over the online CPUs instead for validating the
bandwidth calculations.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20250306052954.452005-2-sshegde@linux.ibm.com
|
|
It is already difficult for users to troubleshoot which of multiple pid
limits restricts their workload. The per-(hierarchical-)NS pid_max would
contribute to the confusion.
Also, the implementation copies the limit upon creation from
parent, this pattern showed cumbersome with some attributes in legacy
cgroup controllers -- it's subject to race condition between parent's
limit modification and children creation and once copied it must be
changed in the descendant.
Let's do what other places do (ucounts or cgroup limits) -- create new
pid namespaces without any limit at all. The global limit (actually any
ancestor's limit) is still effectively in place, we avoid the
set/unshare race and bumps of global (ancestral) limit have the desired
effect on pid namespace that do not care.
Link: https://lore.kernel.org/r/20240408145819.8787-1-mkoutny@suse.com/
Link: https://lore.kernel.org/r/20250221170249.890014-1-mkoutny@suse.com/
Fixes: 7863dcc72d0f4 ("pid: allow pid_max to be set per pid namespace")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/20250305145849.55491-1-mkoutny@suse.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The recent rewrite with the use of regular atomic helpers broke the
DPMS unblanking on X11. Fix it by moving the call of
bochs_hw_blank(false) from CRTC mode_set_nofb() to atomic_enable().
Fixes: 2037174993c8 ("drm/bochs: Use regular atomic helpers")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1238209
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304134203.20534-1-tiwai@suse.de
|
|
The variable "compact_result" is not initialized in function
__alloc_pages_slowpath(). It causes should_compact_retry() to use an
uninitialized value.
Initialize variable "compact_result" with the value COMPACT_SKIPPED.
BUG: KMSAN: uninit-value in __alloc_pages_slowpath+0xee8/0x16c0 mm/page_alloc.c:4416
__alloc_pages_slowpath+0xee8/0x16c0 mm/page_alloc.c:4416
__alloc_frozen_pages_noprof+0xa4c/0xe00 mm/page_alloc.c:4752
alloc_pages_mpol+0x4cd/0x890 mm/mempolicy.c:2270
alloc_frozen_pages_noprof mm/mempolicy.c:2341 [inline]
alloc_pages_noprof mm/mempolicy.c:2361 [inline]
folio_alloc_noprof+0x1dc/0x350 mm/mempolicy.c:2371
filemap_alloc_folio_noprof+0xa6/0x440 mm/filemap.c:1019
__filemap_get_folio+0xb9a/0x1840 mm/filemap.c:1970
grow_dev_folio fs/buffer.c:1039 [inline]
grow_buffers fs/buffer.c:1105 [inline]
__getblk_slow fs/buffer.c:1131 [inline]
bdev_getblk+0x2c9/0xab0 fs/buffer.c:1431
getblk_unmovable include/linux/buffer_head.h:369 [inline]
ext4_getblk+0x3b7/0xe50 fs/ext4/inode.c:864
ext4_bread_batch+0x9f/0x7d0 fs/ext4/inode.c:933
__ext4_find_entry+0x1ebb/0x36c0 fs/ext4/namei.c:1627
ext4_lookup_entry fs/ext4/namei.c:1729 [inline]
ext4_lookup+0x189/0xb40 fs/ext4/namei.c:1797
__lookup_slow+0x538/0x710 fs/namei.c:1793
lookup_slow+0x6a/0xd0 fs/namei.c:1810
walk_component fs/namei.c:2114 [inline]
link_path_walk+0xf29/0x1420 fs/namei.c:2479
path_openat+0x30f/0x6250 fs/namei.c:3985
do_filp_open+0x268/0x600 fs/namei.c:4016
do_sys_openat2+0x1bf/0x2f0 fs/open.c:1428
do_sys_open fs/open.c:1443 [inline]
__do_sys_openat fs/open.c:1459 [inline]
__se_sys_openat fs/open.c:1454 [inline]
__x64_sys_openat+0x2a1/0x310 fs/open.c:1454
x64_sys_call+0x36f5/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:258
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Local variable compact_result created at:
__alloc_pages_slowpath+0x66/0x16c0 mm/page_alloc.c:4218
__alloc_frozen_pages_noprof+0xa4c/0xe00 mm/page_alloc.c:4752
Link: https://lkml.kernel.org/r/tencent_ED1032321D6510B145CDBA8CBA0093178E09@qq.com
Reported-by: syzbot+0cfd5e38e96a5596f2b6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0cfd5e38e96a5596f2b6
Signed-off-by: Hao Zhang <zhanghao1@kylinos.cn>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The return value of rio_add_net() should be checked. If it fails,
put_device() should be called to free the memory and give up the reference
initialized in rio_add_net().
Link: https://lkml.kernel.org/r/20250227041131.3680761-1-haoxiang_li2024@163.com
Fixes: e6b585ca6e81 ("rapidio: move net allocation into core code")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
