| Age | Commit message (Collapse) | Author |
|---|
|
If device_register() fails, call put_device() to give up the reference to
avoid a memory leak, per the comment at device_register().
Found by code review.
Link: https://lore.kernel.org/r/20250225021440.3130264-1-make24@iscas.ac.cn
Fixes: 37d6a0a6f470 ("PCI: Add pci_register_host_bridge() interface")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
[bhelgaas: squash Dan Carpenter's double free fix from
https://lore.kernel.org/r/db806a6c-a91b-4e5a-a84b-6b7e01bdac85@stanley.mountain]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
|
|
Previously most resizable BAR interfaces (pci_rebar_get_possible_sizes(),
pci_rebar_set_size(), etc) as well as pci_restore_state() searched config
space for a Resizable BAR capability. Most devices don't have such a
capability, so this is wasted effort, especially for pci_restore_state().
Search for a Resizable BAR capability once at enumeration-time and cache
the offset so we don't have to search every time we need it. No functional
change intended.
Link: https://lore.kernel.org/r/20250215000301.175097-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Following a reset, a Function may respond to Config Requests with Request
Retry Status (RRS) Completion Status to indicate that it is temporarily
unable to process the Request, but will be able to process the Request in
the future (PCIe r6.0, sec 2.3.1).
If the Configuration RRS Software Visibility feature is enabled and a Root
Complex receives RRS for a config read of the Vendor ID, the Root Complex
completes the Request to the host by returning PCI_VENDOR_ID_PCI_SIG,
0x0001 (sec 2.3.2).
The Config RRS SV feature applies only to Root Ports and is not directly
related to pci_scan_bridge_extend(). Move the RRS SV enable to
set_pcie_port_type() where we handle other PCIe-specific configuration.
Link: https://lore.kernel.org/r/20250303210217.199504-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Device nodes in the examples are supposed to be enabled, so the schema
will be validated against them. Keeping them disabled hides potential
errors.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250307081327.35153-2-krzysztof.kozlowski@linaro.org
|
|
The example DTS uses 'num-ib-windows' and 'num-ob-windows' properties
but these are not defined in the binding. Binding also does not
reference snps,dw-pcie-common.yaml, probably because it is quite
different even though the device is based on Synopsys controller.
The properties are actually deprecated, so simply drop them from the
example.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250307081327.35153-1-krzysztof.kozlowski@linaro.org
|
|
Remove the superfluous function dw_pcie_ep_find_ext_capability(),
as it is virtually identical to dw_pcie_find_ext_capability().
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250221202646.395252-3-cassel@kernel.org
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Fix a kernel oops found while testing the stm32_pcie Endpoint driver
with handling of PERST# deassertion:
During EP initialization, pci_epf_test_alloc_space() allocates all BARs,
which are further freed if epc_set_bar() fails (for instance, due to no
free inbound window).
However, when pci_epc_set_bar() fails, the error path:
pci_epc_set_bar() ->
pci_epf_free_space()
does not clear the previous assignment to epf_test->reg[bar].
Then, if the host reboots, the PERST# deassertion restarts the BAR
allocation sequence with the same allocation failure (no free inbound
window), creating a double free situation since epf_test->reg[bar] was
deallocated and is still non-NULL.
Thus, make sure that pci_epf_alloc_space() and pci_epf_free_space()
invocations are symmetric, and as such, set epf_test->reg[bar] to NULL
when memory is freed.
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Link: https://lore.kernel.org/r/20250124123043.96112-1-christian.bruel@foss.st.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The static function devm_pci_epc_match() is only invoked within the
devm_pci_epc_destroy(). However, since it was initially introduced,
this new API has had no callers.
Thus, remove both the unused API and the static function.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250217-remove_api-v2-1-b169c9117045@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Looking at section "11.4.4.29 USP_PCIE_RESBAR Registers Summary" in the
Technical Reference Manual (TRM) for RK3588, we can see that none of the
BARs are Fixed BARs, but actually Resizable BARs.
I couldn't find any reference in the TRM for RK3568, but looking at the
downstream PCIe endpoint driver, both RK3568 and RK3588 are treated as
the same, so the BARs on RK3568 must also be Resizable BARs.
Now when we actually have support for Resizable BARs, let's configure
these BARs as such.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250131182949.465530-16-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The support for a specific iATU alignment was added in
commit 2a9a801620ef ("PCI: endpoint: Add support to specify alignment for
buffers allocated to BARs").
This commit specifically mentions both that the alignment by each DWC
based EP driver should match CX_ATU_MIN_REGION_SIZE, and that AM65x
specifically has a 64 KB alignment.
This also matches the CX_ATU_MIN_REGION_SIZE value specified in the
section "12.2.2.4.7 PCIe Subsystem Address Translation" of the Technical
Reference Manual (TRM) for AM65x:
https://www.ti.com/lit/ug/spruid7e/spruid7e.pdf
This higher value, 1 MB, was obviously an ugly hack used to be able to
handle Resizable BARs which have a minimum size of 1 MB.
Now when we actually have support for Resizable BARs, let's configure the
iATU alignment requirement to the actual requirement.
(BARs described as Resizable will still get aligned to 1 MB.)
Cc: stable+noautosel@kernel.org # Depends on PCI endpoint Resizable BARs series
Fixes: 23284ad677a9 ("PCI: keystone: Add support for PCIe EP in AM654x Platforms")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250131182949.465530-15-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Looking at section "12.2.2.4.15 PCIe Subsystem BAR Configuration" in the
following Technical Reference Manual (TRM) for AM65x:
https://www.ti.com/lit/ug/spruid7e/spruid7e.pdf
We can see that BAR2 and BAR5 are not Fixed BARs, but actually Resizable
BARs.
Now when we actually have support for Resizable BARs, let's configure
these BARs as such.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250131182949.465530-14-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The DWC databook specifies three different BARn_SIZING_SCHEME_N as:
- Fixed Mask (0)
- Programmable Mask (1)
- Resizable BAR (2)
Each of these sizing schemes have different instructions for how to
initialize the BAR.
The DWC driver currently does not support resizable BARs.
Instead, in order to somewhat support resizable BARs, the DWC EP driver
currently has an ugly hack that force sets a resizable BAR to 1 MB, if
such a BAR is detected.
Additionally, this hack only works if the DWC glue driver also has lied
in their EPC features, and claimed that the resizable BAR is a 1 MB fixed
size BAR.
This is unintuitive (as you somehow need to know that you need to lie in
your EPC features), but other than that it is overly restrictive, since a
resizable BAR is capable of supporting sizes different than 1 MB.
Add proper support for resizable BARs in the DWC EP driver.
Note that the pci_epc_set_bar() API takes a struct pci_epf_bar which tells
the EPC driver how it wants to configure the BAR.
struct pci_epf_bar only has a single size struct member.
This means that an EPC driver will only be able to set a single supported
size. This is perfectly fine, as we do not need the complexity of allowing
a host to change the size of the BAR. If someone ever wants to support
resizing a resizable BAR, the pci_epc_set_bar() API can be extended in the
future.
With these changes, we allow an EPF driver to configure the size of
Resizable BARs, rather than forcing them to a 1 MB size.
This means that an EPC driver does not need to lie in EPC features, and an
EPF driver will be able to set an arbitrary size (not be forced to a 1 MB
size), just like BAR_PROGRAMMABLE.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250131182949.465530-13-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Move dw_pcie_ep_find_ext_capability() so that it is located next to
dw_pcie_ep_find_capability().
Additionally, a follow-up commit requires this to be defined earlier
in order to avoid a forward declaration.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250131182949.465530-12-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Add a helper function to convert a size to the representation used by the
Resizable BAR Capability Register.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250131182949.465530-11-cassel@kernel.org
[mani: squashed the change that added PCIe spec reference to comments
from https://lore.kernel.org/linux-pci/20250219171454.2903059-2-cassel@kernel.org]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
A resizable BAR is different from a normal BAR in a few ways:
- The minimum size of a resizable BAR is 1 MB.
- Each BAR that is resizable has a Capability and Control register in
the Resizable BAR Capability structure.
These registers contain the supported sizes and the currently selected
size of a resizable BAR.
The supported sizes is a bitmap of the supported sizes. The selected size
is a single value that is equal to one of the supported sizes.
A resizable BAR thus has to be configured differently than a
BAR_PROGRAMMABLE BAR, which usually sets the BAR size/mask in a vendor
specific way.
The PCI endpoint framework currently does not support resizable BARs.
Add a BAR type BAR_RESIZABLE, so that an EPC driver can support resizable
BARs properly.
Note that the pci_epc_set_bar() API takes a struct pci_epf_bar which tells
the EPC driver how it wants to configure the BAR.
struct pci_epf_bar only has a single size struct member.
This means that an EPC driver will only be able to set a single supported
size. This is perfectly fine, as we do not need the complexity of allowing
a host to change the size of the BAR. If someone ever wants to support
resizing a resizable BAR, the pci_epc_set_bar() API can be extended in the
future.
With these changes, we allow an EPF driver to configure the size of
Resizable BARs, rather than forcing them to a 1 MB size.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250131182949.465530-10-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The struct pci_epf_test_reg is the actual data in pci-epf-test's test_reg
BAR (usually BAR0), which the host uses to send commands (etc.), and which
pci-epf-test uses to send back status codes.
pci-epf-test currently reads and writes this data without any endianness
conversion functions, which means that pci-epf-test is completely broken
on big-endian endpoint systems.
PCI devices are inherently little-endian, and the data stored in the PCI
BARs should be in little-endian.
Use endianness conversion functions when reading and writing data to
struct pci_epf_test_reg so that pci-epf-test will behave correctly on
big-endian endpoint systems.
Fixes: 349e7a85b25f ("PCI: endpoint: functions: Add an EP function to test PCI")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250127161242.104651-2-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
There are two variables that indicate the interrupt type to be used
in the next test execution, global "irq_type" and "test->irq_type".
The former is referenced from pci_endpoint_test_get_irq() to preserve
the current type for ioctl(PCITEST_GET_IRQTYPE).
In the pci_endpoint_test_request_irq(), since this global variable
is referenced when an error occurs, the unintended error message is
displayed.
For example, after running "pcitest -i 2", the following message
shows "MSI 3" even if the current IRQ type becomes "MSI-X":
pci-endpoint-test 0000:01:00.0: Failed to request IRQ 30 for MSI 3
SET IRQ TYPE TO MSI-X: NOT OKAY
Fix this issue by using "test->irq_type" instead of global "irq_type".
Cc: stable@vger.kernel.org
Fixes: b2ba9225e031 ("misc: pci_endpoint_test: Avoid using module parameter to determine irqtype")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20250225110252.28866-4-hayashi.kunihiko@socionext.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
request_irq error
After devm_request_irq() fails with error in pci_endpoint_test_request_irq(),
the pci_endpoint_test_free_irq_vectors() is called assuming that all IRQs
have been released.
However, some requested IRQs remain unreleased, so there are still
/proc/irq/* entries remaining, and this results in WARN() with the
following message:
remove_proc_entry: removing non-empty directory 'irq/30', leaking at least 'pci-endpoint-test.0'
WARNING: CPU: 0 PID: 202 at fs/proc/generic.c:719 remove_proc_entry +0x190/0x19c
To solve this issue, set the number of remaining IRQs to test->num_irqs,
and release IRQs in advance by calling pci_endpoint_test_release_irq().
Cc: stable@vger.kernel.org
Fixes: e03327122e2c ("pci_endpoint_test: Add 2 ioctl commands")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20250225110252.28866-3-hayashi.kunihiko@socionext.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Running 'pcitest -b 0' fails with "TEST FAILED" when the BAR0 size
is e.g. 8 GB.
The return value of the pci_resource_len() macro can be larger than that
of a signed integer type. Thus, when using 'pcitest' with an 8 GB BAR,
the bar_size of the integer type will overflow.
Change bar_size from integer to resource_size_t to prevent integer
overflow for large BAR sizes with 32-bit compilers.
In order to handle 64-bit resource_type_t on 32-bit platforms, we would
have needed to use a function like div_u64() or similar. Instead, change
the code to use addition instead of division. This avoids the need for
div_u64() or similar, while also simplifying the code.
Fixes: cda370ec6d1f ("misc: pci_endpoint_test: Avoid using hard-coded BAR sizes")
Co-developed-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250124093300.3629624-2-cassel@kernel.org
[mani: added fixes tag]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The current code returns -ENOMEM if test->bar[barno] is NULL.
There can be two reasons why test->bar[barno] is NULL:
1) The pci_ioremap_bar() call in pci_endpoint_test_probe() failed.
2) The BAR was skipped, because it is disabled by the endpoint.
Many PCI endpoint controller drivers will disable all BARs in their
init function. A disabled BAR will have a size of 0.
A PCI endpoint function driver will be able to enable any BAR that
is not marked as BAR_RESERVED (which means that the BAR should not
be touched by the EPF driver).
Thus, perform check if the size is 0, before checking if
test->bar[barno] is NULL, such that we can return different errors.
This will allow the selftests to return SKIP instead of FAIL for
disabled BARs.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250123120147.3603409-3-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Increase the size of the string buffer to avoid potential truncation in
pci_endpoint_test_probe().
This fixes the following build warning when compiling with W=1:
drivers/misc/pci_endpoint_test.c:29:49: note: directive argument in the range [0, 2147483647]
29 | #define DRV_MODULE_NAME "pci-endpoint-test"
| ^~~~~~~~~~~~~~~~~~~
drivers/misc/pci_endpoint_test.c:998:38: note: in expansion of macro ‘DRV_MODULE_NAME’
998 | snprintf(name, sizeof(name), DRV_MODULE_NAME ".%d", id);
| ^~~~~~~~~~~~~~~
drivers/misc/pci_endpoint_test.c:998:9: note: ‘snprintf’ output between 20 and 29 bytes into a destination of size 24
998 | snprintf(name, sizeof(name), DRV_MODULE_NAME ".%d", id);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250123103127.3581432-2-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Commit f26d37ee9bda ("misc: pci_endpoint_test: Fix IOCTL return value")
changed the return value of pci_endpoint_test_bars_read_bar() from false
to -EINVAL on error, however, it failed to update the error handling.
Fixes: f26d37ee9bda ("misc: pci_endpoint_test: Fix IOCTL return value")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250204110640.570823-2-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Add GET_IRQTYPE API checks to each interrupt test.
While at it, change pci_ep_ioctl() to get the appropriate return
value from ioctl().
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20250225110252.28866-2-hayashi.kunihiko@socionext.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Currently BARs that have been disabled by the endpoint controller driver
will result in a test FAIL.
Returning FAIL for a BAR that is disabled seems overly pessimistic.
There are EPC that disables one or more BARs intentionally.
One reason for this is that there are certain EPCs that are hardwired to
expose internal PCIe controller registers over a certain BAR, so the EPC
driver disables such a BAR, such that the host will not overwrite random
registers during testing.
Such a BAR will be disabled by the EPC driver's init function, and the
BAR will be marked as BAR_RESERVED, such that it will be unavailable to
endpoint function drivers.
Let's return FAIL only for BARs that are actually enabled and failed the
test, and let's return skip for BARs that are not even enabled.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250123120147.3603409-4-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
pci_release_resource() will print "... releasing" regardless of the
resource being assigned or not. Move the print after the res->parent check
to avoid claiming the kernel would be releasing an unassigned resource.
Likely, none of the current callers pass a resource that is unassigned so
this change is mostly to correct the non-sensical order than to remove
errorneous printouts.
Link: https://lore.kernel.org/r/20250307140922.5776-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Per PCIe r6.0, sec 7.8.6.2, devices can advertise Resizable BAR sizes up to
128 TB in the Resizable BAR Capability register. Larger sizes can be
advertised via the Capability register, but that requires an API change.
Update pci_rebar_get_possible_sizes() and pbus_size_mem() to increase the
sizes we currently support from 512 GB to 128 TB.
Link: https://lore.kernel.org/r/20250307053535.44918-1-daizhiyuan@phytium.com.cn
Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
PCIe r6.1, sec 6.30.1.1, describes a "Vendor ID", a "Data Object Type" and
"Next Index" as the fields in the DOE Discovery Response Data Object. The
DOE driver currently uses both the terms 'type' and 'prot' for the second
element.
Rename all uses of the DOE Discovery Response Data Object to use 'type' as
the second element of the object header, instead of type/prot as it
currently is.
Link: https://lore.kernel.org/r/20250306075211.1855177-2-alistair@alistair23.me
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
DOE r1.1 replaced all occurrences of "protocol" with the term "feature" or
"Data Object Type". PCIe r6.1 incorporated that change.
Rename the existing terms protocol with feature.
Link: https://lore.kernel.org/r/20250306075211.1855177-1-alistair@alistair23.me
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
|
|
The i.MX8QM and i.MX8QXP/DXP have an additional interrupt for DMA.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250225102726.654070-2-alexander.stein@ew.tq-group.com
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Formalise the binding for the PCI controllers in the Freescale MPC8xxx
chip family. Information about PCI-X-specific properties was taken from
fsl,pci.txt. The examples were taken from mpc8315erdb.dts and
xpedite5200_xmon.dts.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250220-ppcyaml-pci-v3-1-ca94a4f62a85@posteo.net
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Document the PCIe controller on IPQ5332 platform. IPQ5332 will use
IPQ9574 as the compatible fallback in the future.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20250220094251.230936-6-quic_varada@quicinc.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Add PCIe Root Port controller support for the Agilex family of chips.
The Agilex PCIe Hard IP has three variants that are mostly software
compatible, except for a couple register offsets. The P-Tile variant
supports Gen3/Gen4 1x16. The F-Tile variant supports Gen3/Gen4 4x4,
4x8, and 4x16. The R-Tile variant improves on the F-Tile variant by
adding Gen5 support.
To simplify the implementation of pci_ops read/write functions,
ep_{read/write}_cfg() callbacks were added to struct altera_pci_ops
to easily distinguish between hardware variants.
Signed-off-by: D M, Sharath Kumar <sharath.kumar.d.m@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250221170452.875419-3-matthew.gerlach@linux.intel.com
[kwilczynski: tidy code comments]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The for_each_available_child_of_node_scoped() helper provides
a scope-based clean-up functionality to put the device_node
automatically, and as such, there is no need to call of_node_put()
directly.
Thus, use this helper to simplify the code.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240831040413.126417-7-zhangzekun11@huawei.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The for_each_available_child_of_node_scoped() helper provides
a scope-based clean-up functionality to put the device_node
automatically, and as such, there is no need to call of_node_put()
directly.
Thus, use this helper to simplify the code.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240831040413.126417-6-zhangzekun11@huawei.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The for_each_available_child_of_node_scoped() helper provides
a scope-based clean-up functionality to put the device_node
automatically, and as such, there is no need to call of_node_put()
directly.
Thus, use this helper to simplify the code.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240831040413.126417-5-zhangzekun11@huawei.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The for_each_available_child_of_node_scoped() helper provides
a scope-based clean-up functionality to put the device_node
automatically, and as such, there is no need to call of_node_put()
directly.
Thus, use this helper to simplify the code.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240831040413.126417-4-zhangzekun11@huawei.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The combination of dev_err() and the returned error code could be
replaced by dev_err_probe() in driver's probe function.
Thus, convert the code to use dev_err_probe() to make code simpler.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240831040413.126417-3-zhangzekun11@huawei.com
[kwilczynski: commit log, return -ETIMEDOUT from hi3660_pcie_phy_start()
rather than -EINVAL for when the PIPE clock fails to become stable,
drop redundant dev->of_node NULL check]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Add the compatible bindings for the three variants of the Agilex
PCIe Hard IP.
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250221170452.875419-2-matthew.gerlach@linux.intel.com
[kwilczynski: update description within devicetree bindings]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The for_each_available_child_of_node_scoped() helper provides
a scope-based clean-up functionality to put the device_node
automatically, and as such, there is no need to call of_node_put()
directly.
Thus, use this helper to simplify the code.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240831040413.126417-2-zhangzekun11@huawei.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
After d88f521da3ef ("PCI: Allow userspace to query and set device reset
mechanism"), userspace can disable reset of specific PCI devices by writing
an empty string to the sysfs reset_method file.
However, pci_slot_resettable() does not check pci_reset_supported(), which
means that pci_reset_function() will still reset the device even if
userspace has disabled all the reset methods.
I was able to reproduce this issue with a vfio device passed to a qemu
guest, where I had disabled PCI reset via sysfs.
Add an explicit check of pci_reset_supported() in both
pci_slot_resettable() and pci_bus_resettable() to ensure both the reset
status and reset execution are bypassed if an administrator disables it for
a device.
Link: https://lore.kernel.org/r/20250207205600.1846178-1-naravamudan@nvidia.com
Fixes: d88f521da3ef ("PCI: Allow userspace to query and set device reset mechanism")
Signed-off-by: Nishanth Aravamudan <naravamudan@nvidia.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Raphael Norwitz <raphael.norwitz@nutanix.com>
Cc: Amey Narkhede <ameynarkhede03@gmail.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Yishai Hadas <yishaih@nvidia.com>
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: Kevin Tian <kevin.tian@intel.com>
|
|
Firmware developers reported that Linux issues two PCIe hotplug commands in
very short intervals on an ARM server, which doesn't comply with the PCIe
spec. According to PCIe r6.1, sec 6.7.3.2, if the Command Completed event
is supported, software must wait for a command to complete or wait at
least 1 second before sending a new command.
In the failure case, the first PCIe hotplug command is from
get_port_device_capability(), which sends a command to disable PCIe hotplug
interrupts without waiting for its completion, and the second command comes
from pcie_enable_notification() of pciehp driver, which enables hotplug
interrupts again.
Fix this by only disabling the hotplug interrupts when the pciehp driver is
not enabled.
Link: https://lore.kernel.org/r/20250303023630.78397-1-feng.tang@linux.alibaba.com
Fixes: 2bd50dd800b5 ("PCI: PCIe: Disable PCIe port services during port initialization")
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
|
|
For no apparent reason, the pci_hp_{create,remove}_module_link() helpers
live in slot.c, even though they're only called from two functions in
pci_hotplug_core.c.
Inline the helpers to reduce code size and number of exported symbols.
Link: https://lore.kernel.org/r/c207f03cfe32ae9002d9b453001a1dd63d9ab3fb.1740501868.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The PCI hotplug core contains five has_*_file() functions to determine
whether a certain sysfs file shall be added (or removed) for a given
hotplug slot.
The functions receive a struct pci_slot pointer which they have to
dereference back to a struct hotplug_slot.
Avoid by passing them a struct hotplug_slot pointer directly.
Link: https://lore.kernel.org/r/5b2f5b4ac45285953d00fd7637732a93fd40d26e.1740501868.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The PCI hotplug core contains five has_*_file() functions to determine
whether a certain sysfs file shall be added (or removed) for a given
hotplug slot.
The functions perform NULL pointer checks for the hotplug_slot and its
hotplug_slot_ops. However the callers already perform these checks:
pci_hp_register()
__pci_hp_register()
__pci_hp_initialize()
pci_hp_deregister()
pci_hp_del()
The only way to actually trigger these checks is to call pci_hp_add()
without having called pci_hp_initialize().
Amend pci_hp_add() to catch that and drop the now superfluous NULL
pointer checks in has_*_file().
Drop the same superfluous checks from pci_hp_create_module_link(),
which is (only) called from pci_hp_add().
Link: https://lore.kernel.org/r/37d1928edf8c3201a8b10794f1db3142e16e02b9.1740501868.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
In December 2002, historic commit
https://git.kernel.org/tglx/history/c/bec7aa00ffe5
("[PATCH] more module warning fixes")
amended the PCI hotplug core to acquire a reference on the hotplug
driver module when a sysfs attribute is accessed. That was necessary
because back in the day, sysfs code did not take any precautions to
prevent module unloading when an attribute was accessed.
Soon after in July 2003, historic commit
https://git.kernel.org/tglx/history/c/1cf6d20f6078
("[PATCH] SYSFS: add module referencing to sysfs attribute files.")
addressed that deficiency. But the commit neglected to remove the now
unnecessary reference acquisition from the PCI hotplug core.
The commit acquired a module reference for the entire duration between
open() and close() of a sysfs attribute. This made it impossible to
unload a module while attributes were kept open by user space.
That's possible today:
When a hotplug driver module is unloaded, it removes sysfs attributes of
all its hotplug slots by calling pci_hp_del(). This will wait for any
concurrent user space operation to finish:
pci_hp_del()
fs_remove_slot()
sysfs_remove_file()
sysfs_remove_file_ns()
kernfs_remove_by_name_ns()
__kernfs_remove()
kernfs_drain()
A user space operation such as read() briefly acquires a reference on
the attribute with kernfs_get_active(). kernfs_drain() waits until all
such references are released before allowing attribute removal. Once
the attribute is removed, any subsequent user space operation on a still
open attribute file will return -ENODEV.
Thus, reference acquisition by the PCI hotplug core is still unnecessary
today. So drop it at long last.
Link: https://lore.kernel.org/r/ed950fa2722967be4491146c7b867c1e7be11d37.1740501868.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The PCI hotplug core keeps a list of all registered slots. Its sole
purpose is to WARN() on slot removal if another slot is using the same
name.
But this can never happen because already on slot creation, an error is
returned and multiple messages are emitted if a slot's name is
duplicated:
pci_hp_register()
__pci_hp_register()
__pci_hp_initialize()
pci_create_slot()
kobject_init_and_add()
kobject_add_varg()
kobject_add_internal()
create_dir()
sysfs_create_dir_ns()
kernfs_create_dir_ns()
sysfs_warn_dup()
pr_warn("cannot create duplicate filename ...")
pr_err("%s failed for %s with -EEXIST, ...");
Drop the superfluous list.
Link: https://lore.kernel.org/r/603735bc50eb370bc7f1c358441ac671360bab25.1740501868.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The test shell script "set_pcie_speed.sh" is not installed in INSTALL_PATH.
Attempting to execute set_pcie_cooling_state.sh shows warning:
./set_pcie_cooling_state.sh: line 119: ./set_pcie_speed.sh: No such file or directory
Add "set_pcie_speed.sh" to TEST_PROGS.
Link: https://lore.kernel.org/r/Z8FfK8rN30lKzvVV@ly-workstation
Fixes: 838f12c3d551 ("selftests/pcie_bwctrl: Create selftests")
Signed-off-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Log pci_dbg() messages about the reset methods we attempt and any errors
(-ENOTTY means "try the next method").
Set CONFIG_DYNAMIC_DEBUG=y and enable by booting with
dyndbg="file drivers/pci/* +p" or enable at runtime:
# echo "file drivers/pci/* +p" > /sys/kernel/debug/dynamic_debug/control
Link: https://lore.kernel.org/r/20250303204220.197172-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
|
|
PCI devices device tree nodes can be already created. This was introduced
by commit 407d1a51921e ("PCI: Create device tree node for bridge").
In order to have device tree nodes related to PCI devices attached on their
PCI root bus (the PCI bus handled by the PCI host bridge), a PCI root bus
device tree node is needed. This root bus node will be used as the parent
node of the first level devices scanned on the bus. On device tree based
systems, this PCI root bus device tree node is set to the node of the
related PCI host bridge. The PCI host bridge node is available in the
device tree used to describe the hardware passed at boot.
On non device tree based system (such as ACPI), a device tree node for the
PCI host bridge or for the root bus does not exist. Indeed, the PCI host
bridge is not described in a device tree used at boot simply because no
device tree is passed at boot.
The device tree PCI host bridge node creation needs to be done at runtime.
This is done in the same way as for the creation of the PCI device nodes.
I.e. node and properties are created based on computed information done by
the PCI core. Also, as is done on device tree based systems, this PCI host
bridge node is used for the PCI root bus.
With this done, hardware available in a PCI device that doesn't follow the
PCI model consisting in one PCI function handled by one driver can be
described by a device tree overlay loaded by the PCI device driver on non
device tree based systems. Those PCI devices provide a single PCI function
that includes several functionalities that require different drivers. The
device tree overlay describes the internal devices and their relationships.
It allows to load drivers needed by those different devices in order to
have functionalities handled.
Link: https://lore.kernel.org/r/20250224141356.36325-6-herve.codina@bootlin.com
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The res parameter has no reason to be a pointer to an un-const struct
resource. Indeed, struct resource is not supposed to be modified by the
function.
Constify the res parameter.
Link: https://lore.kernel.org/r/20250224141356.36325-5-herve.codina@bootlin.com
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
|
