| Age | Commit message (Collapse) | Author |
|---|
|
the error path of .probe()
Current implementation of ci_hdrc_imx_driver does not decrement the
refcount of the device obtained in usbmisc_get_init_data(). Add a
put_device() call in .remove() and in .probe() before returning an
error.
This bug was found by an experimental static analysis tool that I am
developing.
Cc: stable <stable@kernel.org>
Fixes: f40017e0f332 ("chipidea: usbmisc_imx: Add USB support for VF610 SoCs")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20241216015539.352579-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The current implementation of the ucsi glink client connector_status()
callback is only relying on the state of the gpio. This means that even
when the cable is unplugged, the orientation propagated to the switches
along the graph is "orientation normal", instead of "orientation none",
which would be the correct one in this case.
One of the Qualcomm DP-USB PHY combo drivers, which needs to be aware of
the orientation change, is relying on the "orientation none" to skip
the reinitialization of the entire PHY. Since the ucsi glink client
advertises "orientation normal" even when the cable is unplugged, the
mentioned PHY is taken down and reinitialized when in fact it should be
left as-is. This triggers a crash within the displayport controller driver
in turn, which brings the whole system down on some Qualcomm platforms.
Propagating "orientation none" from the ucsi glink client on the
connector_status() callback hides the problem of the mentioned PHY driver
away for now. But the "orientation none" is nonetheless the correct one
to be used in this case.
So propagate the "orientation none" instead when the connector status
flags says cable is disconnected.
Fixes: 76716fd5bf09 ("usb: typec: ucsi: glink: move GPIO reading into connector_status callback")
Cc: stable <stable@kernel.org> # 6.10
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241212-usb-typec-ucsi-glink-add-orientation-none-v2-1-db5a50498a77@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit c033563220e0f7a8
("usb: gadget: configfs: Attach arbitrary strings to cdev")
a user can provide extra string descriptors to a USB gadget via configfs.
For "manufacturer", "product", "serialnumber", setting the string via
configfs ignores a trailing LF.
For the arbitrary strings the LF was not ignored.
This patch ignores a trailing LF to make this consistent with the existing
behavior for "manufacturer", ... string descriptors.
Fixes: c033563220e0 ("usb: gadget: configfs: Attach arbitrary strings to cdev")
Cc: stable <stable@kernel.org>
Signed-off-by: Ingo Rohloff <ingo.rohloff@lauterbach.com>
Link: https://lore.kernel.org/r/20241212154114.29295-1-ingo.rohloff@lauterbach.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the regression introduced by commit d8c6edfa3f4e ("USB:
usblp: don't call usb_set_interface if there's a single alt"),
which causes that unsupported protocols can also be set via
ioctl when the num_altsetting of the device is 1.
Move the check for protocol support to the earlier stage.
Fixes: d8c6edfa3f4e ("USB: usblp: don't call usb_set_interface if there's a single alt")
Cc: stable <stable@kernel.org>
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://lore.kernel.org/r/20241212143852.671889-1-jerrysteve1101@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently afunc_bind sets std_ac_if_desc.bNumEndpoints to 1 if
controls (mute/volume) are enabled. During next afunc_bind call,
bNumEndpoints would be unchanged and incorrectly set to 1 even
if the controls aren't enabled.
Fix this by resetting the value of bNumEndpoints to 0 on every
afunc_bind call.
Fixes: eaf6cbe09920 ("usb: gadget: f_uac2: add volume and mute support")
Cc: stable <stable@kernel.org>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/20241211115915.159864-1-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The CSR dump support leverages the FBNIC_BOUNDS macro, which pads the end
condition for each section by adding an offset of 1. However, the RPC RAM
section, which is dumped differently from other sections, does not rely
on this macro and instead directly uses end boundary address. Hence,
subtracting 1 from the end address results in skipping a register.
Fixes 3d12862b216d (“eth: fbnic: Add support to dump registers”)
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20241218232614.439329-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
max_contaminant_read_resistance_kohm()
If max_contaminant_read_adc_mv() fails, then return the error code. Don't
return zero.
Fixes: 02b332a06397 ("usb: typec: maxim_contaminant: Implement check_contaminant callback")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/f1bf3768-419e-40dd-989c-f7f455d6c824@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
XHCI_SKIP_PHY_INIT property
The source of quirk XHCI_SKIP_PHY_INIT comes from xhci_plat_priv.quirks or
software node property. This will set skip_phy_initialization if software
node also has XHCI_SKIP_PHY_INIT property.
Fixes: a6cd2b3fa894 ("usb: host: xhci-plat: Parse xhci-missing_cas_quirk and apply quirk")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20241209111423.4085548-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Runtime PM documentation (Section 5) mentions, during remove()
callbacks, drivers should undo the runtime PM changes done in
probe(). Usually this means calling pm_runtime_disable(),
pm_runtime_dont_use_autosuspend() etc. Hence add missing
function to disable autosuspend on dwc3-am62 driver unbind.
Fixes: e8784c0aec03 ("drivers: usb: dwc3: Add AM62 USB wrapper driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20241209105728.3216872-1-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Before writing a new value to the register, the old value needs to be
masked out for the new value to be programmed as intended, because at
least in some cases the reset value of that field is 0xf (max value).
At the moment, the dwc3 core initialises the threshold to the maximum
value (0xf), with the option to override it via a DT. No upstream DTs
seem to override it, therefore this commit doesn't change behaviour for
any upstream platform. Nevertheless, the code should be fixed to have
the desired outcome.
Do so.
Fixes: 80caf7d21adc ("usb: dwc3: add lpm erratum support")
Cc: stable@vger.kernel.org # 5.10+ (needs adjustment for 5.4)
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20241209-dwc3-nyet-fix-v2-1-02755683345b@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If userspace holds an fd open, unbinds the device and then closes it,
the driver shouldn't try to access the hardware. Protect it by using
drm_dev_enter()/drm_dev_exit(). This fixes the following page fault:
<6> [IGT] xe_wedged: exiting, ret=98
<1> BUG: unable to handle page fault for address: ffffc901bc5e508c
<1> #PF: supervisor read access in kernel mode
<1> #PF: error_code(0x0000) - not-present page
...
<4> xe_lrc_update_timestamp+0x1c/0xd0 [xe]
<4> xe_exec_queue_update_run_ticks+0x50/0xb0 [xe]
<4> xe_exec_queue_fini+0x16/0xb0 [xe]
<4> __guc_exec_queue_fini_async+0xc4/0x190 [xe]
<4> guc_exec_queue_fini_async+0xa0/0xe0 [xe]
<4> guc_exec_queue_fini+0x23/0x40 [xe]
<4> xe_exec_queue_destroy+0xb3/0xf0 [xe]
<4> xe_file_close+0xd4/0x1a0 [xe]
<4> drm_file_free+0x210/0x280 [drm]
<4> drm_close_helper.isra.0+0x6d/0x80 [drm]
<4> drm_release_noglobal+0x20/0x90 [drm]
Fixes: 514447a12190 ("drm/xe: Stop accumulating LRC timestamp on job_free")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3421
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218053122.2730195-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 4ca1fd418338d4d135428a0eb1e16e3b3ce17ee8)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
There is a typo in function call and instead of VF LMEM we were
looking at VF GGTT provisioning. Fix that.
Fixes: 234670cea9a2 ("drm/xe/pf: Skip fair VFs provisioning if already provisioned")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216223253.819-1-michal.wajdeczko@intel.com
(cherry picked from commit a8d0aa0e7fcd20c9f1992688c0f0d07a68287403)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Fix a potential GPU page fault during tt -> system moves by waiting for
migration jobs to complete before unmapping SG. This ensures that IOMMU
mappings are not prematurely torn down while a migration job is still in
progress.
v2: Use intr=false(Matt A)
v3: Update commit message(Matt A)
v4: s/DMA_RESV_USAGE_BOOKKEEP/DMA_RESV_USAGE_KERNEL(Thomas)
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3466
Fixes: 75521e8b56e8 ("drm/xe: Perform dma_map when moving system buffer objects to TT")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213122415.3880017-2-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit cda06412c06893a6f07a2fbf89d42a0972ec9e8e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Ensure a non-interruptible wait is used when moving a bo to
XE_PL_SYSTEM. This prevents dma_mappings from being removed prematurely
while a GPU job is still in progress, even if the CPU receives a
signal during the operation.
Fixes: 75521e8b56e8 ("drm/xe: Perform dma_map when moving system buffer objects to TT")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213122415.3880017-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit dc5e20ae1f8a7c354dc9833faa2720254e5a5443)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
There is a mesa debug tool for decoding devcoredump files. Recent
changes to improve the devcoredump output broke that tool. So revert
the changes until the tool can be extended to support the new fields.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: c28fd6c358db ("drm/xe/devcoredump: Improve section headings and add tile info")
Fixes: ec1455ce7e35 ("drm/xe/devcoredump: Add ASCII85 dump helper function")
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-xe@lists.freedesktop.org
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213172833.1733376-1-John.C.Harrison@Intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 70fb86a85dc9fd66014d7eb2fe356f50702ceeb6)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
update
Make sure the trace_kprobe's module notifer callback function is called
after jump_label's callback is called. Since the trace_kprobe's callback
eventually checks jump_label address during registering new kprobe on
the loading module, jump_label must be updated before this registration
happens.
Link: https://lore.kernel.org/all/173387585556.995044.3157941002975446119.stgit@devnote2/
Fixes: 614243181050 ("tracing/kprobes: Support module init function probing")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Flush CQE handler has not been called if QP state gets into errored
mode in DWQE path. So, the new added outstanding WQEs will never be
flushed.
It leads to a hung task timeout when using NFS over RDMA:
__switch_to+0x7c/0xd0
__schedule+0x350/0x750
schedule+0x50/0xf0
schedule_timeout+0x2c8/0x340
wait_for_common+0xf4/0x2b0
wait_for_completion+0x20/0x40
__ib_drain_sq+0x140/0x1d0 [ib_core]
ib_drain_sq+0x98/0xb0 [ib_core]
rpcrdma_xprt_disconnect+0x68/0x270 [rpcrdma]
xprt_rdma_close+0x20/0x60 [rpcrdma]
xprt_autoclose+0x64/0x1cc [sunrpc]
process_one_work+0x1d8/0x4e0
worker_thread+0x154/0x420
kthread+0x108/0x150
ret_from_fork+0x10/0x18
Fixes: 01584a5edcc4 ("RDMA/hns: Add support of direct wqe")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241220055249.146943-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
WARN_ON() is called in the IO path. And it could lead to a warning
storm. Use WARN_ON_ONCE() instead of WARN_ON().
Fixes: 12542f1de179 ("RDMA/hns: Refactor process about opcode in post_send()")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241220055249.146943-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
If it fails to modify QP to RTR, dip_ctx will not be attached. And
during detroying QP, the invalid dip_ctx pointer will be accessed.
Fixes: faa62440a577 ("RDMA/hns: Fix different dgids mapping to the same dip_idx")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241220055249.146943-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Due to HW limitation, the three region of WQE buffer must be mapped
and set to HW in a fixed order: SQ buffer, SGE buffer, and RQ buffer.
Currently when one region is zero-hop while the other two are not,
the zero-hop region will not be mapped. This violate the limitation
above and leads to address error.
Fixes: 38389eaa4db1 ("RDMA/hns: Add mtr support for mixed multihop addressing")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241220055249.146943-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
This reverts commit 417d8c47271d5cf1a705e997065873b2a9a36fd4.
With that patch the panel in the Tentacruel ASUS Chromebook CM14
(CM1402F) flickers. There are 1 or 2 times per second a black panel.
Stable Kernel 6.11.5 and mainline 6.12-rc4 works only when reverse
that patch.
Fixes: 417d8c47271d ("drm/mediatek: dsi: Correct calculation formula of PHY Timing")
Cc: stable@vger.kernel.org
Cc: Shuijing Li <shuijing.li@mediatek.com>
Reported-by: Jens Ziller <zillerbaer@gmx.de>
Closes: https://patchwork.kernel.org/project/dri-devel/patch/20240412031208.30688-1-shuijing.li@mediatek.com/
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241212001908.6056-1-chunkuang.hu@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
The last use of is_server_using_iface() was removed in 2022 by
commit aa45dadd34e4 ("cifs: change iface_list from array to sorted linked
list")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Previously, deferred file handles were reused only for read
operations, this commit extends to reusing deferred handles
for write operations. By reusing these handles we can reduce
the need for open/close operations over the wire.
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Since the dynamic preemption has been enabled for PREEMPT_RT we have now
CONFIG_PREEMPT and CONFIG_PREEMPT_RT set simultaneously. This affects
the vermagic strings which comes now PREEMPT with PREEMPT_RT enabled.
The PREEMPT_RT module usually can not be loaded on a PREEMPT kernel
because some symbols are missing.
However if the symbols are fine then it continues and it crashes later.
The problem is that the struct module has a different layout and the
num_exentries or init members are at a different position leading to a
crash later on. This is not necessary caught by the size check in
elf_validity_cache_index_mod() because the mem member has an alignment
requirement of __module_memory_align which is big enough keep the total
size unchanged. Therefore we should keep the string accurate instead of
removing it.
Move the PREEMPT_RT check before the PREEMPT so that it takes precedence
if both symbols are enabled.
Fixes: 35772d627b55c ("sched: Enable PREEMPT_DYNAMIC for PREEMPT_RT")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Link: https://lore.kernel.org/r/20241205160602.3lIAsJRT@linutronix.de
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
|
|
|
|
Pull KVM x86 fixes from Paolo Bonzini:
- Disable AVIC on SNP-enabled systems that don't allow writes to the
virtual APIC page, as such hosts will hit unexpected RMP #PFs in the
host when running VMs of any flavor.
- Fix a WARN in the hypercall completion path due to KVM trying to
determine if a guest with protected register state is in 64-bit mode
(KVM's ABI is to assume such guests only make hypercalls in 64-bit
mode).
- Allow the guest to write to supported bits in MSR_AMD64_DE_CFG to fix
a regression with Windows guests, and because KVM's read-only
behavior appears to be entirely made up.
- Treat TDP MMU faults as spurious if the faulting access is allowed
given the existing SPTE. This fixes a benign WARN (other than the
WARN itself) due to unexpectedly replacing a writable SPTE with a
read-only SPTE.
- Emit a warning when KVM is configured with ignore_msrs=1 and also to
hide the MSRs that the guest is looking for from the kernel logs.
ignore_msrs can trick guests into assuming that certain processor
features are present, and this in turn leads to bogus bug reports.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: let it be known that ignore_msrs is a bad idea
KVM: VMX: don't include '<linux/find.h>' directly
KVM: x86/mmu: Treat TDP MMU faults as spurious if access is already allowed
KVM: SVM: Allow guest writes to set MSR_AMD64_DE_CFG bits
KVM: x86: Play nice with protected guests in complete_hypercall_exit()
KVM: SVM: Disable AVIC on SNP-enabled system without HvInUseWrAllowed feature
|
|
KVM x86 fixes for 6.13:
- Disable AVIC on SNP-enabled systems that don't allow writes to the virtual
APIC page, as such hosts will hit unexpected RMP #PFs in the host when
running VMs of any flavor.
- Fix a WARN in the hypercall completion path due to KVM trying to determine
if a guest with protected register state is in 64-bit mode (KVM's ABI is to
assume such guests only make hypercalls in 64-bit mode).
- Allow the guest to write to supported bits in MSR_AMD64_DE_CFG to fix a
regression with Windows guests, and because KVM's read-only behavior appears
to be entirely made up.
- Treat TDP MMU faults as spurious if the faulting access is allowed given the
existing SPTE. This fixes a benign WARN (other than the WARN itself) due to
unexpectedly replacing a writable SPTE with a read-only SPTE.
|
|
When running KVM with ignore_msrs=1 and report_ignored_msrs=0, the user has
no clue that that the guest is being lied to. This may cause bug reports
such as https://gitlab.com/qemu-project/qemu/-/issues/2571, where enabling
a CPUID bit in QEMU caused Linux guests to try reading MSR_CU_DEF_ERR; and
being lied about the existence of MSR_CU_DEF_ERR caused the guest to assume
other things about the local APIC which were not true:
Sep 14 12:02:53 kernel: mce: [Firmware Bug]: Your BIOS is not setting up LVT offset 0x2 for deferred error IRQs correctly.
Sep 14 12:02:53 kernel: unchecked MSR access error: RDMSR from 0x852 at rIP: 0xffffffffb548ffa7 (native_read_msr+0x7/0x40)
Sep 14 12:02:53 kernel: Call Trace:
...
Sep 14 12:02:53 kernel: native_apic_msr_read+0x20/0x30
Sep 14 12:02:53 kernel: setup_APIC_eilvt+0x47/0x110
Sep 14 12:02:53 kernel: mce_amd_feature_init+0x485/0x4e0
...
Sep 14 12:02:53 kernel: [Firmware Bug]: cpu 0, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu
Without reported_ignored_msrs=0 at least the host kernel log will contain
enough information to avoid going on a wild goose chase. But if reports
about individual MSR accesses are being silenced too, at least complain
loudly the first time a VM is started.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The header clearly states that it does not want to be included directly,
only via '<linux/bitmap.h>'. Replace the include accordingly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Message-ID: <20241217070539.2433-2-wsa+renesas@sang-engineering.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Disable #address-cells/#size-cells warning on coreboot (Chromebooks)
platforms
- Add missing root #address-cells/#size-cells in default empty DT
- Fix uninitialized variable in of_irq_parse_one()
- Fix interrupt-map cell length check in of_irq_parse_imap_parent()
- Fix refcount handling in __of_get_dma_parent()
- Fix error path in of_parse_phandle_with_args_map()
- Fix dma-ranges handling with flags cells
- Drop explicit fw_devlink handling of 'interrupt-parent'
- Fix "compression" typo in fixed-partitions binding
- Unify "fsl,liodn" property type definitions
* tag 'devicetree-fixes-for-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Add coreboot firmware to excluded default cells list
of/irq: Fix using uninitialized variable @addr_len in API of_irq_parse_one()
of/irq: Fix interrupt-map cell length check in of_irq_parse_imap_parent()
of: Fix refcount leakage for OF node returned by __of_get_dma_parent()
of: Fix error path in of_parse_phandle_with_args_map()
dt-bindings: mtd: fixed-partitions: Fix "compression" typo
of: Add #address-cells/#size-cells in the device-tree root empty node
dt-bindings: Unify "fsl,liodn" type definitions
of: address: Preserve the flags portion on 1:1 dma-ranges mapping
of/unittest: Add empty dma-ranges address translation tests
of: property: fw_devlink: Do not use interrupt-parent directly
|
|
It claims the issue is only relevant for shared descriptor tables which
is of no concern for POSIX (but then is POSIX of concern to anyone
today?), which I presume predates standarized threading.
The comment also mentions the following systems:
- OpenBSD installing a larval file -- they moved away from it, file is
installed late and EBUSY is returned on conflict
- FreeBSD returning EBADF -- reworked to install the file early like
OpenBSD used to do
- NetBSD "deadlocks in amusing ways" -- their solution looks
Solaris-inspired (not a compliment) and I would not be particularly
surprised if it indeed deadlocked, in amusing ways or otherwise
I don't believe mentioning any of these adds anything and the statement
about the issue not being POSIX-relevant is outdated.
dup2 description in POSIX still does not mention the problem.
Just shorten the comment and be done with it.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20241205154743.1586584-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fix grammar and spelling in the propagate_umount() function.
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241204081218.12141-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Replace the hardcoded value `7` in `put_fc_log()` with `ARRAY_SIZE`.
This improves maintainability by ensuring the loop adapts to changes
in the buffer size.
Signed-off-by: Guo Weikang <guoweikang.kernel@gmail.com>
Link: https://lore.kernel.org/r/20241202081146.1031780-1-guoweikang.kernel@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The routine is used in link_path_walk() for every path component.
To my reading the entire point of the fence was to grab a fully
populated mnt_idmap, but that's already going to happen with mere
consume fence.
Eliminates an actual fence on arm64.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20241130051712.1036527-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The fput() of file rcS might not have completed causing issues when
executing the file.
rcS is opened in do_populate_rootfs before executed. At the end of
do_populate_rootfs() flush_delayed_fput() is called. Now
do_populate_rootfs() assumes that all fput()s caused by
do_populate_rootfs() have completed.
But flush_delayed_fput() can only ensure that fput() on the current
delayed_fput_list has finished. Any file that has been removed from
delayed_fput_list asynchronously in the meantime might not have
completed causing the exec to fail.
do_populate_rootfs delayed_fput_list delayed_fput execve
fput() a
fput() a->b
fput() a->b->rcS
__fput(a)
fput() c
fput() c->d
__fput(b)
flush_delayed_fput
__fput(c)
__fput(d)
__fput(b)
__fput(b) execve(rcS)
Ensure that all delayed work is done by calling flush_delayed_work() in
flush_delayed_fput() explicitly.
Signed-off-by: Chen Lin <chen.lin5@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Link: https://lore.kernel.org/r/20241023135850067m3w2R0UXESiVCYz_wdAoT@zte.com.cn
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: Yang Tao <yang.tao172@zte.com.cn>
Cc: Xu Xin <xu.xin16@zte.com.cn>
[brauner: rewrite commit message]
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We are attempting to eliminate page->index, so use page->private
instead.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20241125175443.2911738-1-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use proc_douintvec_minmax() instead of proc_dointvec_minmax() to handle
sysctl_nr_open, because its data type is unsigned int, not int.
Fixes: 9b80a184eaad ("fs/file: more unsigned file descriptors")
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Link: https://lore.kernel.org/r/20241124034636.325337-1-alexjlzheng@tencent.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Mateusz Guzik <mjguzik@gmail.com> says:
quote:
When utilized it dodges strlen() in vfs_readlink(), giving about 1.5%
speed up when issuing readlink on /initrd.img on ext4.
The size is stored in a union with i_devices, which is never looked at
unless the inode is for a device.
ext4 and tmpfs are patched, other filesystems can also get there with
some more work.
benchmark:
plug into will-it-scale into tests/readlink1.c:
char *testcase_description = "readlink /initrd.img";
void testcase(unsigned long long *iterations, unsigned long nr)
{
char *tmplink = "/initrd.img";
char buf[1024];
while (1) {
int error = readlink(tmplink, buf, sizeof(buf));
assert(error > 0);
(*iterations)++;
}
}
* patches from https://lore.kernel.org/r/20241120112037.822078-1-mjguzik@gmail.com:
tmpfs: use inode_set_cached_link()
ext4: use inode_set_cached_link()
vfs: support caching symlink lengths in inodes
Link: https://lore.kernel.org/r/20241120112037.822078-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20241120112037.822078-4-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add some kernel-doc notation to structs in fiemap header files
then pull that into Documentation/filesystems/fiemap.rst
instead of duplicating the header file structs in fiemap.rst.
This helps to future-proof fiemap.rst against struct changes.
Add missing flags documentation from header files into fiemap.rst
for FIEMAP_FLAG_CACHE and FIEMAP_EXTENT_SHARED.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20241121011352.201907-1-rdunlap@infradead.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20241120112037.822078-3-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Annotation already used to be there, but got lost in 52ac39e5db5148f7
("seqlock: seqcount_t: Implement all read APIs as statement expressions").
Does not look like it was intentional.
Without it gcc 12 decides to compile the following in path_init:
nd->m_seq = __read_seqcount_begin(&mount_lock.seqcount);
nd->r_seq = __read_seqcount_begin(&rename_lock.seqcount);
into 2 cases of conditional jumps forward if the value is even, aka
branch prediction miss by default in the common case on x86-64.
With the patch jumps are only for odd values.
before:
[snip]
mov 0x104fe96(%rip),%eax # 0xffffffff82409680 <mount_lock>
test $0x1,%al
je 0xffffffff813b97fa <path_init+122>
pause
mov 0x104fe8a(%rip),%eax # 0xffffffff82409680 <mount_lock>
test $0x1,%al
jne 0xffffffff813b97ee <path_init+110>
mov %eax,0x48(%rbx)
mov 0x104fdfd(%rip),%eax # 0xffffffff82409600 <rename_lock>
test $0x1,%al
je 0xffffffff813b9813 <path_init+147>
pause
mov 0x104fdf1(%rip),%eax # 0xffffffff82409600 <rename_lock>
test $0x1,%al
jne 0xffffffff813b9807 <path_init+135>
[/snip]
after:
[snip]
mov 0x104fec6(%rip),%eax # 0xffffffff82409680 <mount_lock>
test $0x1,%al
jne 0xffffffff813b99af <path_init+607>
mov %eax,0x48(%rbx)
mov 0x104fe35(%rip),%eax # 0xffffffff82409600 <rename_lock>
test $0x1,%al
jne 0xffffffff813b999d <path_init+589>
[/snip]
Interestingly .text gets slightly smaller (as reported by size(1)):
before: 20702563
after: 20702429
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20230727180355.813995-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When utilized it dodges strlen() in vfs_readlink(), giving about 1.5%
speed up when issuing readlink on /initrd.img on ext4.
Filesystems opt in by calling inode_set_cached_link() when creating an
inode.
The size is stored in a new union utilizing the same space as i_devices,
thus avoiding growing the struct or taking up any more space.
Churn-wise the current readlink_copy() helper is patched to accept the
size instead of calculating it.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20241120112037.822078-2-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Christian Brauner <brauner@kernel.org> says:
Allow bind-mounting pidfds. Similar to nsfs let's allow bind-mounts for
pidfds. This allows pidfds to be safely recovered and checked for
process recycling.
Instead of checking d_ops for both nsfs and pidfs we could in a
follow-up patch add a flag argument to struct dentry_operations that
functions similar to file_operations->fop_flags.
* patches from https://lore.kernel.org/r/20241219-work-pidfs-mount-v1-0-dbc56198b839@kernel.org:
selftests: add pidfd bind-mount tests
pidfs: allow bind-mounts
Link: https://lore.kernel.org/r/20241219-work-pidfs-mount-v1-0-dbc56198b839@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Link: https://lore.kernel.org/r/20241219-work-pidfs-mount-v1-2-dbc56198b839@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Allow bind-mounting pidfds. Similar to nsfs let's allow bind-mounts for
pidfds. This allows pidfds to be safely recovered and checked for
process recycling.
Link: https://lore.kernel.org/r/20241219-work-pidfs-mount-v1-1-dbc56198b839@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Two more small fixes, correcting the cacheline size on Raspberry Pi 5
and fixing a logic mistake in the microchip mpfs firmware driver"
* tag 'soc-fixes-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
firmware: microchip: fix UL_IAP lock check in mpfs_auto_update_state()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"25 hotfixes. 16 are cc:stable. 19 are MM and 6 are non-MM.
The usual bunch of singletons and doubletons - please see the relevant
changelogs for details"
* tag 'mm-hotfixes-stable-2024-12-21-12-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (25 commits)
mm: huge_memory: handle strsep not finding delimiter
alloc_tag: fix set_codetag_empty() when !CONFIG_MEM_ALLOC_PROFILING_DEBUG
alloc_tag: fix module allocation tags populated area calculation
mm/codetag: clear tags before swap
mm/vmstat: fix a W=1 clang compiler warning
mm: convert partially_mapped set/clear operations to be atomic
nilfs2: fix buffer head leaks in calls to truncate_inode_pages()
vmalloc: fix accounting with i915
mm/page_alloc: don't call pfn_to_page() on possibly non-existent PFN in split_large_buddy()
fork: avoid inappropriate uprobe access to invalid mm
nilfs2: prevent use of deleted inode
zram: fix uninitialized ZRAM not releasing backing device
zram: refuse to use zero sized block device as backing device
mm: use clear_user_(high)page() for arch with special user folio handling
mm: introduce cpu_icache_is_aliasing() across all architectures
mm: add RCU annotation to pte_offset_map(_lock)
mm: correctly reference merged VMA
mm: use aligned address in copy_user_gigantic_page()
mm: use aligned address in clear_gigantic_page()
mm: shmem: fix ShmemHugePages at swapout
...
|
|
My tests run an allyesconfig build and it failed with the following errors:
LD [M] samples/kfifo/dma-example.ko
ld.lld: error: undefined symbol: nec7210_board_reset
ld.lld: error: undefined symbol: nec7210_read
ld.lld: error: undefined symbol: nec7210_write
It appears that some modules call the function nec7210_board_reset()
that is defined in nec7210.c. In an allyesconfig build, these other
modules are built in. But the file that holds nec7210_board_reset()
has:
obj-m += nec7210.o
Where that "-m" means it only gets built as a module. With the other
modules built in, they have no access to nec7210_board_reset() and the build
fails.
This isn't the only function. After fixing that one, I hit another:
ld.lld: error: undefined symbol: push_gpib_event
ld.lld: error: undefined symbol: gpib_match_device_path
Where push_gpib_event() was also used outside of the file it was defined
in, and that file too only was built as a module.
Since the directory that nec7210.c is only traversed when
CONFIG_GPIB_NEC7210 is set, and the directory with gpib_common.c is only
traversed when CONFIG_GPIB_COMMON is set, use those configs as the
option to build those modules. When it is an allyesconfig, then they
will both be built in and their functions will be available to the other
modules that are also built in.
Fixes: 3ba84ac69b53e ("staging: gpib: Add nec7210 GPIB chip driver")
Fixes: 9dde4559e9395 ("staging: gpib: Add GPIB common core driver")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove stale code in usr/include/headers_check.pl
- Fix issues in the user-mode-linux Debian package
- Fix false-positive "export twice" errors in modpost
* tag 'kbuild-fixes-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: distinguish same module paths from different dump files
kbuild: deb-pkg: Do not install maint scripts for arch 'um'
kbuild: deb-pkg: add debarch for ARCH=um
kbuild: Drop support for include/asm-<arch> in headers_check.pl
|
