summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-02-13netfs: Add retry stat countersDavid Howells
Add stat counters to count the number of request and subrequest retries and display them in /proc/fs/netfs/stats. Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20250212222402.3618494-3-dhowells@redhat.com cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-02-13netfs: Fix a number of read-retry hangsDavid Howells
Fix a number of hangs in the netfslib read-retry code, including: (1) netfs_reissue_read() doubles up the getting of references on subrequests, thereby leaking the subrequest and causing inode eviction to wait indefinitely. This can lead to the kernel reporting a hang in the filesystem's evict_inode(). Fix this by removing the get from netfs_reissue_read() and adding one to netfs_retry_read_subrequests() to deal with the one place that didn't double up. (2) The loop in netfs_retry_read_subrequests() that retries a sequence of failed subrequests doesn't record whether or not it retried the one that the "subreq" pointer points to when it leaves the loop. It may not if renegotiation/repreparation of the subrequests means that fewer subrequests are needed to span the cumulative range of the sequence. Because it doesn't record this, the piece of code that discards now-superfluous subrequests doesn't know whether it should discard the one "subreq" points to - and so it doesn't. Fix this by noting whether the last subreq it examines is superfluous and if it is, then getting rid of it and all subsequent subrequests. If that one one wasn't superfluous, then we would have tried to go round the previous loop again and so there can be no further unretried subrequests in the sequence. (3) netfs_retry_read_subrequests() gets yet an extra ref on any additional subrequests it has to get because it ran out of ones it could reuse to to renegotiation/repreparation shrinking the subrequests. Fix this by removing that extra ref. (4) In netfs_retry_reads(), it was using wait_on_bit() to wait for NETFS_SREQ_IN_PROGRESS to be cleared on all subrequests in the sequence - but netfs_read_subreq_terminated() is now using a wait queue on the request instead and so this wait will never finish. Fix this by waiting on the wait queue instead. To make this work, a new flag, NETFS_RREQ_RETRYING, is now set around the wait loop to tell the wake-up code to wake up the wait queue rather than requeuing the request's work item. Note that this flag replaces the NETFS_RREQ_NEED_RETRY flag which is no longer used. (5) Whilst not strictly anything to do with the hang, netfs_retry_read_subrequests() was also doubly incrementing the subreq_counter and re-setting the debug index, leaving a gap in the trace. This is also fixed. One of these hangs was observed with 9p and with cifs. Others were forced by manual code injection into fs/afs/file.c. Firstly, afs_prepare_read() was created to provide an changing pattern of maximum subrequest sizes: static int afs_prepare_read(struct netfs_io_subrequest *subreq) { struct netfs_io_request *rreq = subreq->rreq; if (!S_ISREG(subreq->rreq->inode->i_mode)) return 0; if (subreq->retry_count < 20) rreq->io_streams[0].sreq_max_len = umax(200, 2222 - subreq->retry_count * 40); else rreq->io_streams[0].sreq_max_len = 3333; return 0; } and pointed to by afs_req_ops. Then the following: struct netfs_io_subrequest *subreq = op->fetch.subreq; if (subreq->error == 0 && S_ISREG(subreq->rreq->inode->i_mode) && subreq->retry_count < 20) { subreq->transferred = subreq->already_done; __clear_bit(NETFS_SREQ_HIT_EOF, &subreq->flags); __set_bit(NETFS_SREQ_NEED_RETRY, &subreq->flags); afs_fetch_data_notify(op); return; } was inserted into afs_fetch_data_success() at the beginning and struct netfs_io_subrequest given an extra field, "already_done" that was set to the value in "subreq->transferred" by netfs_reissue_read(). When reading a 4K file, the subrequests would get gradually smaller, a new subrequest would be allocated around the 3rd retry and then eventually be rendered superfluous when the 20th retry was hit and the limit on the first subrequest was eased. Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20250212222402.3618494-2-dhowells@redhat.com Tested-by: Marc Dionne <marc.dionne@auristor.com> Tested-by: Steve French <stfrench@microsoft.com> cc: Ihor Solodrai <ihor.solodrai@pm.me> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Paulo Alcantara <pc@manguebit.com> cc: Jeff Layton <jlayton@kernel.org> cc: v9fs@lists.linux.dev cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-02-13drm/vkms: Fix use after free and double free on init errorJosé Expósito
If the driver initialization fails, the vkms_exit() function might access an uninitialized or freed default_config pointer and it might double free it. Fix both possible errors by initializing default_config only when the driver initialization succeeded. Reported-by: Louis Chauvet <louis.chauvet@bootlin.com> Closes: https://lore.kernel.org/all/Z5uDHcCmAwiTsGte@louis-chauvet-laptop/ Fixes: 2df7af93fdad ("drm/vkms: Add vkms_config type") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Thomas Zimmermann <tzimmremann@suse.de> Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250212084912.3196-1-jose.exposito89@gmail.com Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
2025-02-13drm/i915/psr: Write PSR2_MAN_TRK_CTL on DSB commit as wellJouni Högander
Add PSR2_MAN_TRK_CTL writing into DSB commit in intel_atomic_dsb_finish. Taking PSR lock over DSB commit is not needed because PSR2_MAN_TRK_CTL is now written only by DSB. Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-8-jouni.hogander@intel.com
2025-02-13drm/i915/psr: Allow writing PSR2_MAN_TRK_CTL using DSBJouni Högander
Allow writing PSR2_MAN_TRK_CTL using DSB by using intel_de_write_dsb. Do not check intel_dp->psr.lock being held when using DSB. This assertion doesn't make sense as in case of using DSB the actual write happens later and we are not taking intel_dp->psr.lock mutex over dsb commit. Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-7-jouni.hogander@intel.com
2025-02-13drm/i915/psr: Use SFF_CTL on invalidate/flush for LunarLake onwardsJouni Högander
In LunarLake we have SFF_CTL register which contains SFF bit ored with respective SFF bit in PSR2_MAN_TRK_CTL register. Use this register instead of the bit in PSR2_MAN_TRK_CTL on frontbuffer tracking callbacks. This helps us avoiding taking psr mutex when performing atomic commit. We don't need to set the CFF bit as selective update configuration in PSR2_MAN_TRL_CTL is not overwritten anymore. I.e. we have valid configuration in PSR2_MAN_TRK_CTL and in plane SEL_FETCH_* registers when SFF bit gets cleared by the HW in case something triggers "frame change" event after SFF bit is cleared. Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-6-jouni.hogander@intel.com
2025-02-13drm/i915/psr: Add register definitions for SFF_CTL and CFF_CTL registersJouni Högander
Add register definitions for SFF_CTL and CFF_CTL registers. Name them as LNL_SFF_CTL and LNL_CFF_CTL. v2: use _MMIO_TRANS instead of _MMIO_TRANS2 Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-5-jouni.hogander@intel.com
2025-02-13drm/i915/psr: Split setting sff and cff bits away from intel_psr_force_updateJouni Högander
This is a clean-up and a preparation for adding own SFF and CFF registers for LunarLake onwards. Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-4-jouni.hogander@intel.com
2025-02-13drm/i915/psr: Rename psr_force_hw_tracking_exit as intel_psr_force_updateJouni Högander
psr_force_hw_tracking_exit is misleading name as it is used for PSR1, PSR2 HW tracking and PSR2 selective fetch. Due to this rename it as intel_psr_force_update. Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-3-jouni.hogander@intel.com
2025-02-13drm/i915/psr: Use PSR2_MAN_TRK_CTL CFF bit only to send full updateJouni Högander
We are preparing for a change where only frontbuffer flush will use single full frame bit of a new register (SFF_CTL) available on LunarLake onwards. It shouldn't be necessary to have SFF bit set if CFF bit is set in PSR2_MAN_TRK_CTL -> removing setting it on all platforms as there is not reason to have it different on older platforms. v2: commit message improved Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-2-jouni.hogander@intel.com
2025-02-13Merge tag 'usb-serial-6.14-rc3' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial device ids for 6.14-rc3 Here are some new modem device ids and a couple of related cleanups of the device id table. All have been in linux-next with no reported issues. * tag 'usb-serial-6.14-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: drop MeiG Smart defines USB: serial: option: fix Telit Cinterion FN990A name USB: serial: option: add Telit Cinterion FN990B compositions USB: serial: option: add MeiG Smart SLM828
2025-02-13PCI: Avoid FLR for Mediatek MT7922 WiFiBjorn Helgaas
The Mediatek MT7922 WiFi device advertises FLR support, but it apparently does not work, and all subsequent config reads return ~0: pci 0000:01:00.0: [14c3:0616] type 00 class 0x028000 PCIe Endpoint pciback 0000:01:00.0: not ready 65535ms after FLR; giving up After an FLR, pci_dev_wait() waits for the device to become ready. Prior to d591f6804e7e ("PCI: Wait for device readiness with Configuration RRS"), it polls PCI_COMMAND until it is something other that PCI_POSSIBLE_ERROR (~0). If it times out, pci_dev_wait() returns -ENOTTY and __pci_reset_function_locked() tries the next available reset method. Typically this is Secondary Bus Reset, which does work, so the MT7922 is eventually usable. After d591f6804e7e, if Configuration Request Retry Status Software Visibility (RRS SV) is enabled, pci_dev_wait() polls PCI_VENDOR_ID until it is something other than the special 0x0001 Vendor ID that indicates a completion with RRS status. When RRS SV is enabled, reads of PCI_VENDOR_ID should return either 0x0001, i.e., the config read was completed with RRS, or a valid Vendor ID. On the MT7922, it seems that all config reads after FLR return ~0 indefinitely. When pci_dev_wait() reads PCI_VENDOR_ID and gets 0xffff, it assumes that's a valid Vendor ID and the device is now ready, so it returns with success. After pci_dev_wait() returns success, we restore config space and continue. Since the MT7922 is not actually ready after the FLR, the restore fails and the device is unusable. We considered changing pci_dev_wait() to continue polling if a PCI_VENDOR_ID read returns either 0x0001 or 0xffff. This "works" as it did before d591f6804e7e, although we have to wait for the timeout and then fall back to SBR. But it doesn't work for SR-IOV VFs, which *always* return 0xffff as the Vendor ID. Mark Mediatek MT7922 WiFi devices to avoid the use of FLR completely. This will cause fallback to another reset method, such as SBR. Link: https://lore.kernel.org/r/20250212193516.88741-1-helgaas@kernel.org Fixes: d591f6804e7e ("PCI: Wait for device readiness with Configuration RRS") Link: https://github.com/QubesOS/qubes-issues/issues/9689#issuecomment-2582927149 Link: https://lore.kernel.org/r/Z4pHll_6GX7OUBzQ@mail-itl Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Cc: stable@vger.kernel.org
2025-02-13firmware: arm_scmi: imx: Correct tx size of scmi_imx_misc_ctrl_setPeng Fan
'struct scmi_imx_misc_ctrl_set_in' has a zero length array in the end, The sizeof will not count 'value[]', and hence Tx size will be smaller than actual size for Tx,and SCMI firmware will flag this as protocol error. Fix this by enlarge the Tx size with 'num * sizeof(__le32)' to count in the size of data. Fixes: 61c9f03e22fc ("firmware: arm_scmi: Add initial support for i.MX MISC protocol") Reviewed-by: Jacky Bai <ping.bai@nxp.com> Tested-by: Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by: Jason Liu <jason.hui.liu@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Message-Id: <20250123063441.392555-1-peng.fan@oss.nxp.com> (sudeep.holla: Commit rewording and replace hardcoded sizeof(__le32) value) Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2025-02-13genirq: Remove unused CONFIG_GENERIC_PENDING_IRQ_CHIPFLAGSAnup Patel
CONFIG_GENERIC_PENDING_IRQ_CHIPFLAGS is not used anymore, hence remove it. Fixes: f94a18249b7f ("genirq: Remove IRQ_MOVE_PCNTXT and related code") Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250209041655.331470-7-apatel@ventanamicro.com
2025-02-13Xen/swiotlb: mark xen_swiotlb_fixup() __initJan Beulich
It's sole user (pci_xen_swiotlb_init()) is __init, too. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Message-ID: <e1198286-99ec-41c1-b5ad-e04e285836c9@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2025-02-13x86/xen: allow larger contiguous memory regions in PV guestsJuergen Gross
Today a PV guest (including dom0) can create 2MB contiguous memory regions for DMA buffers at max. This has led to problems at least with the megaraid_sas driver, which wants to allocate a 2.3MB DMA buffer. The limiting factor is the frame array used to do the hypercall for making the memory contiguous, which has 512 entries and is just a static array in mmu_pv.c. In order to not waste memory for non-PV guests, put the initial frame array into .init.data section and dynamically allocate an array from the .init_after_bootmem hook of PV guests. In case a contiguous memory area larger than the initially supported 2MB is requested, allocate a larger buffer for the frame list. Note that such an allocation is tried only after memory management has been initialized properly, which is tested via a flag being set in the .init_after_bootmem hook. Fixes: 9f40ec84a797 ("xen/swiotlb: add alignment check for dma buffers") Signed-off-by: Juergen Gross <jgross@suse.com> Tested-by: Alan Robinson <Alan.Robinson@fujitsu.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2025-02-13xen/swiotlb: relax alignment requirementsJuergen Gross
When mapping a buffer for DMA via .map_page or .map_sg DMA operations, there is no need to check the machine frames to be aligned according to the mapped areas size. All what is needed in these cases is that the buffer is contiguous at machine level. So carve out the alignment check from range_straddles_page_boundary() and move it to a helper called by xen_swiotlb_alloc_coherent() and xen_swiotlb_free_coherent() directly. Fixes: 9f40ec84a797 ("xen/swiotlb: add alignment check for dma buffers") Reported-by: Jan Vejvalka <jan.vejvalka@lfmotol.cuni.cz> Tested-by: Jan Vejvalka <jan.vejvalka@lfmotol.cuni.cz> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2025-02-13arm64: rust: clean Rust 1.85.0 warning using softfloat targetMiguel Ojeda
Starting with Rust 1.85.0 (to be released 2025-02-20), `rustc` warns [1] about disabling neon in the aarch64 hardfloat target: warning: target feature `neon` cannot be toggled with `-Ctarget-feature`: unsound on hard-float targets because it changes float ABI | = note: this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release! = note: for more information, see issue #116344 <https://github.com/rust-lang/rust/issues/116344> Thus, instead, use the softfloat target instead. While trying it out, I found that the kernel sanitizers were not enabled for that built-in target [2]. Upstream Rust agreed to backport the enablement for the current beta so that it is ready for the 1.85.0 release [3] -- thanks! However, that still means that before Rust 1.85.0, we cannot switch since sanitizers could be in use. Thus conditionally do so. Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs). Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Matthew Maurer <mmaurer@google.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Ralf Jung <post@ralfj.de> Cc: Jubilee Young <workingjubilee@gmail.com> Link: https://github.com/rust-lang/rust/pull/133417 [1] Link: https://rust-lang.zulipchat.com/#narrow/channel/131828-t-compiler/topic/arm64.20neon.20.60-Ctarget-feature.60.20warning/near/495358442 [2] Link: https://github.com/rust-lang/rust/pull/135905 [3] Link: https://github.com/rust-lang/rust/issues/116344 Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Matthew Maurer <mmaurer@google.com> Reviewed-by: Ralf Jung <post@ralfj.de> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20250210163732.281786-1-ojeda@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2025-02-13MIPS: fix mips_get_syscall_arg() for o32Dmitry V. Levin
This makes ptrace/get_syscall_info selftest pass on mips o32 and mips64 o32 by fixing the following two test assertions: 1. get_syscall_info test assertion on mips o32: # get_syscall_info.c:218:get_syscall_info:Expected exp_args[5] (3134521044) == info.entry.args[4] (4911432) # get_syscall_info.c:219:get_syscall_info:wait #1: entry stop mismatch 2. get_syscall_info test assertion on mips64 o32: # get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (18446744072548908753) # get_syscall_info.c:210:get_syscall_info:wait #1: entry stop mismatch The first assertion happens due to mips_get_syscall_arg() trying to access another task's context but failing to do it properly because get_user() it calls just peeks at the current task's context. It usually does not crash because the default user stack always gets assigned the same VMA, but it is pure luck which mips_get_syscall_arg() wouldn't have if e.g. the stack was switched (via setcontext(3) or however) or a non-default process's thread peeked at, and in any case irrelevant data is obtained just as observed with the test case. mips_get_syscall_arg() ought to be using access_remote_vm() instead to retrieve the other task's stack contents, but given that the data has been already obtained and saved in `struct pt_regs' it would be an overkill. The first assertion is fixed for mips o32 by using struct pt_regs.args instead of get_user() to obtain syscall arguments. This approach works due to this piece in arch/mips/kernel/scall32-o32.S: /* * Ok, copy the args from the luser stack to the kernel stack. */ .set push .set noreorder .set nomacro load_a4: user_lw(t5, 16(t0)) # argument #5 from usp load_a5: user_lw(t6, 20(t0)) # argument #6 from usp load_a6: user_lw(t7, 24(t0)) # argument #7 from usp load_a7: user_lw(t8, 28(t0)) # argument #8 from usp loads_done: sw t5, PT_ARG4(sp) # argument #5 to ksp sw t6, PT_ARG5(sp) # argument #6 to ksp sw t7, PT_ARG6(sp) # argument #7 to ksp sw t8, PT_ARG7(sp) # argument #8 to ksp .set pop .section __ex_table,"a" PTR_WD load_a4, bad_stack_a4 PTR_WD load_a5, bad_stack_a5 PTR_WD load_a6, bad_stack_a6 PTR_WD load_a7, bad_stack_a7 .previous arch/mips/kernel/scall64-o32.S has analogous code for mips64 o32 that allows fixing the issue by obtaining syscall arguments from struct pt_regs.regs[4..11] instead of the erroneous use of get_user(). The second assertion is fixed by truncating 64-bit values to 32-bit syscall arguments. Fixes: c0ff3c53d4f9 ("MIPS: Enable HAVE_ARCH_TRACEHOOK.") Signed-off-by: Dmitry V. Levin <ldv@strace.io> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-02-13MIPS: Export syscall stack arguments properly for remote useMaciej W. Rozycki
We have several places across the kernel where we want to access another task's syscall arguments, such as ptrace(2), seccomp(2), etc., by making a call to syscall_get_arguments(). This works for register arguments right away by accessing the task's `regs' member of `struct pt_regs', however for stack arguments seen with 32-bit/o32 kernels things are more complicated. Technically they ought to be obtained from the user stack with calls to an access_remote_vm(), but we have an easier way available already. So as to be able to access syscall stack arguments as regular function arguments following the MIPS calling convention we copy them over from the user stack to the kernel stack in arch/mips/kernel/scall32-o32.S, in handle_sys(), to the current stack frame's outgoing argument space at the top of the stack, which is where the handler called expects to see its incoming arguments. This area is also pointed at by the `pt_regs' pointer obtained by task_pt_regs(). Make the o32 stack argument space a proper member of `struct pt_regs' then, by renaming the existing member from `pad0' to `args' and using generated offsets to access the space. No functional change though. With the change in place the o32 kernel stack frame layout at the entry to a syscall handler invoked by handle_sys() is therefore as follows: $sp + 68 -> | ... | <- pt_regs.regs[9] +---------------------+ $sp + 64 -> | $t0 | <- pt_regs.regs[8] +---------------------+ $sp + 60 -> | $a3/argument #4 | <- pt_regs.regs[7] +---------------------+ $sp + 56 -> | $a2/argument #3 | <- pt_regs.regs[6] +---------------------+ $sp + 52 -> | $a1/argument #2 | <- pt_regs.regs[5] +---------------------+ $sp + 48 -> | $a0/argument #1 | <- pt_regs.regs[4] +---------------------+ $sp + 44 -> | $v1 | <- pt_regs.regs[3] +---------------------+ $sp + 40 -> | $v0 | <- pt_regs.regs[2] +---------------------+ $sp + 36 -> | $at | <- pt_regs.regs[1] +---------------------+ $sp + 32 -> | $zero | <- pt_regs.regs[0] +---------------------+ $sp + 28 -> | stack argument #8 | <- pt_regs.args[7] +---------------------+ $sp + 24 -> | stack argument #7 | <- pt_regs.args[6] +---------------------+ $sp + 20 -> | stack argument #6 | <- pt_regs.args[5] +---------------------+ $sp + 16 -> | stack argument #5 | <- pt_regs.args[4] +---------------------+ $sp + 12 -> | psABI space for $a3 | <- pt_regs.args[3] +---------------------+ $sp + 8 -> | psABI space for $a2 | <- pt_regs.args[2] +---------------------+ $sp + 4 -> | psABI space for $a1 | <- pt_regs.args[1] +---------------------+ $sp + 0 -> | psABI space for $a0 | <- pt_regs.args[0] +---------------------+ holding user data received and with the first 4 frame slots reserved by the psABI for the compiler to spill the incoming arguments from $a0-$a3 registers (which it sometimes does according to its needs) and the next 4 frame slots designated by the psABI for any stack function arguments that follow. This data is also available for other tasks to peek/poke at as reqired and where permitted. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-02-13ASoC: imx-audmix: remove cpu_mclk which is from cpu dai deviceShengjiu Wang
When defer probe happens, there may be below error: platform 59820000.sai: Resources present before probing The cpu_mclk clock is from the cpu dai device, if it is not released, then the cpu dai device probe will fail for the second time. The cpu_mclk is used to get rate for rate constraint, rate constraint may be specific for each platform, which is not necessary for machine driver, so remove it. Fixes: b86ef5367761 ("ASoC: fsl: Add Audio Mixer machine driver") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://patch.msgid.link/20250213070518.547375-1-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-02-13arm64: Add missing registrations of hwcapsMark Brown
Commit 819935464cb2 ("arm64/hwcap: Describe 2024 dpISA extensions to userspace") added definitions for HWCAP_FPRCVT, HWCAP_F8MM8 and HWCAP_F8MM4 but did not include the crucial registration in arm64_elf_hwcaps. Add it. Fixes: 819935464cb2 ("arm64/hwcap: Describe 2024 dpISA extensions to userspace") Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20250212-arm64-fix-2024-dpisa-v2-1-67a1c11d6001@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2025-02-13ACPI: GTDT: Relax sanity checking on Platform Timers array countOliver Upton
Perhaps unsurprisingly there are some platforms where the GTDT isn't quite right and the Platforms Timer array overflows the length of the overall table. While the recently-added sanity checking isn't wrong, it makes it impossible to boot the kernel on offending platforms. Try to hobble along and limit the Platform Timer count to the bounds of the table. Cc: Marc Zyngier <maz@kernel.org> Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Zheng Zengkai <zhengzengkai@huawei.com> Cc: stable@vger.kernel.org Fixes: 263e22d6bd1f ("ACPI: GTDT: Tighten the check for the array of platform timer structures") Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Acked-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Link: https://lore.kernel.org/r/20250128001749.3132656-1-oliver.upton@linux.dev Signed-off-by: Will Deacon <will@kernel.org>
2025-02-13arm64: amu: Delay allocating cpumask for AMU FIE supportBeata Michalska
For the time being, the amu_fie_cpus cpumask is being exclusively used by the AMU-related internals of FIE support and is guaranteed to be valid on every access currently made. Still the mask is not being invalidated on one of the error handling code paths, which leaves a soft spot with theoretical risk of UAF for CPUMASK_OFFSTACK cases. To make things sound, delay allocating said cpumask (for CPUMASK_OFFSTACK) avoiding otherwise nasty sanitising case failing to register the cpufreq policy notifications. Signed-off-by: Beata Michalska <beata.michalska@arm.com> Reviewed-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com> Reviewed-by: Sumit Gupta <sumitg@nvidia.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20250131155842.3839098-1-beata.michalska@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2025-02-13drm: writeback: Fix use after free in drm_writeback_connector_cleanup()Dan Carpenter
The drm_writeback_cleanup_job() function frees "pos" so call list_del(&pos->list_entry) first to avoid a use after free. Fixes: 1914ba2b91ea ("drm: writeback: Create drmm variants for drm_writeback_connector initialization") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/78abd541-71e9-4b3b-a05d-2c7caf8d5b2f@stanley.mountain Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-13drm/tests: Fix a test in drm_test_check_valid_clones()Dan Carpenter
The drm_atomic_get_crtc_state() function returns error pointers and not NULL. Update the check to check for error pointers as well as NULL. Fixes: 88849f24e2ab ("drm/tests: Add test for drm_atomic_helper_check_modeset()") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/c50f11c7-932c-47dc-b40f-4ada8b9b6679@stanley.mountain Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-13drm/i915/display: convert i915_pipestat_enable_mask() to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert i915_pipestat_enable_mask() to struct intel_display, allowing further conversions elsewhere. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/975b382c703cfb62f24643e40eac247b8e8bbea8.1739378096.git.jani.nikula@intel.com
2025-02-13drm/i915/display: convert intel_fifo_underrun.[ch] to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert as much as possible of intel_fifo_underrun.[ch] to struct intel_display. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/682e667013e1726a6f2f78484b7e9618cee3b639.1739378096.git.jani.nikula@intel.com
2025-02-13drm/i915/combo-phy: convert intel_combo_phy.[ch] to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert as much as possible of intel_combo_phy.[ch] to struct intel_display, along with intel_phy_is_combo() in intel_display.c. Drive-by convert some drm_dbg() to drm_dbg_kms() while at it. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c2e0a6294a8eaa4c16632881edc4f2d23c576101.1739378096.git.jani.nikula@intel.com
2025-02-13drm/i915/dsi: convert platform checks to display->platform.<platform> styleJani Nikula
These are stragglers from a time the display->platform mechanism didn't exist. Finish the conversion. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/493e4c550f9c515e2e82df1afd8a74a24156e76e.1739378096.git.jani.nikula@intel.com
2025-02-13drm/i915/display: convert intel_mode_valid_max_plane_size() to intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert the intel_mode_valid_max_plane_size() helper to struct intel_display, allowing further conversions elsewhere. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6e7810c793ecc8ff6a31569830bf162156245668.1739378095.git.jani.nikula@intel.com
2025-02-13drm/i915/display: convert intel_cpu_transcoder_mode_valid() to intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert the intel_cpu_transcoder_mode_valid()() helper to struct intel_display, allowing further conversions elsewhere. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f9246a00a2e7aabaffb86f863915a4307e1fd3f8.1739378095.git.jani.nikula@intel.com
2025-02-13drm/i915/sdvo: convert intel_sdvo.[ch] to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert as much as possible of intel_sdvo.[ch] to struct intel_display. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2e79909f8a060d7ff1744911f8da9300eb1f225c.1739378095.git.jani.nikula@intel.com
2025-02-13drm/i915/display: convert intel_set_{cpu,pch}_fifo_underrun_reporting() to ↵Jani Nikula
intel_display Going forward, struct intel_display is the main display device data pointer. Convert intel_set_cpu_fifo_underrun_reporting() and intel_set_pch_fifo_underrun_reporting() to struct intel_display, along with some of the call chains from there. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3b984d0183214d05d0cdecad35184ea8d89ae050.1739378095.git.jani.nikula@intel.com
2025-02-13drm/i915/hpd: drop dev_priv parameter from intel_hpd_pin_default()Jani Nikula
The function doesn't use the parameter for anything. Drop it. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4347a0f71a1a8c515617cf06471486d9bbb4a026.1739378095.git.jani.nikula@intel.com
2025-02-13drm/i915/display: convert assert_port_valid() to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert the assert_port_valid() helper to struct intel_display, allowing further conversions elsewhere. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e06ef0e2cc34d42918f3208362587a17ea34e28f.1739378095.git.jani.nikula@intel.com
2025-02-13drm/i915/display: convert assert_transcoder*() to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert the assert_transcoder*() helpers to struct intel_display, allowing further conversions elsewhere. Do a few small opportunistic conversions right away. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/430c2f3c899bc98beeb6ba8608f841c9271d0971.1739378095.git.jani.nikula@intel.com
2025-02-13drm/i915/ips: convert hsw_ips.c to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert as much as possible of hsw_ips.c to struct intel_display. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ebea40784fca6cfb4dbacec570bc9bef49393fc1.1739378095.git.jani.nikula@intel.com
2025-02-13drm/i915/hdmi: convert g4x_hdmi.[ch] to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert as much as possible of g4x_hdmi.[ch] to struct intel_display. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4fbaaa4cdab8ec020e5b3fb2f615b3c244c9da2d.1739378095.git.jani.nikula@intel.com
2025-02-13drm/i915/dp: convert g4x_dp.[ch] to struct intel displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert as much as possible of g4x_dp.[ch] to struct intel_display. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/89ce4f7e6aa31f3db6316537f54c5bc7df852322.1739378095.git.jani.nikula@intel.com
2025-02-13drm: Fix DSC BPP increment decodingImre Deak
Starting with DPCD version 2.0 bits 6:3 of the DP_DSC_BITS_PER_PIXEL_INC DPCD register contains the NativeYCbCr422_MAX_bpp_DELTA field, which can be non-zero as opposed to earlier DPCD versions, hence decoding the bit_per_pixel increment value at bits 2:0 in the same register requires applying a mask, do so. Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Fixes: 0c2287c96521 ("drm/display/dp: Add helper function to get DSC bpp precision") Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250212161851.4007005-1-imre.deak@intel.com
2025-02-12Merge branch 'net-ethernet-ti-am65-cpsw-xdp-fixes'Jakub Kicinski
Roger Quadros says: ==================== net: ethernet: ti: am65-cpsw: XDP fixes This series fixes memleak and statistics for XDP cases. ==================== Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-0-ec6b1f7f1aca@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-12net: ethernet: ti: am65_cpsw: fix tx_cleanup for XDP caseRoger Quadros
For XDP transmit case, swdata doesn't contain SKB but the XDP Frame. Infer the correct swdata based on buffer type and return the XDP Frame for XDP transmit case. Signed-off-by: Roger Quadros <rogerq@kernel.org> Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support") Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-3-ec6b1f7f1aca@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-12net: ethernet: ti: am65-cpsw: fix RX & TX statistics for XDP_TX caseRoger Quadros
For successful XDP_TX and XDP_REDIRECT cases, the packet was received successfully so update RX statistics. Use original received packet length for that. TX packets statistics are incremented on TX completion so don't update it while TX queueing. If xdp_convert_buff_to_frame() fails, increment tx_dropped. Signed-off-by: Roger Quadros <rogerq@kernel.org> Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support") Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-2-ec6b1f7f1aca@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-12net: ethernet: ti: am65-cpsw: fix memleak in certain XDP casesRoger Quadros
If the XDP program doesn't result in XDP_PASS then we leak the memory allocated by am65_cpsw_build_skb(). It is pointless to allocate SKB memory before running the XDP program as we would be wasting CPU cycles for cases other than XDP_PASS. Move the SKB allocation after evaluating the XDP program result. This fixes the memleak. A performance boost is seen for XDP_DROP test. XDP_DROP test: Before: 460256 rx/s 0 err/s After: 784130 rx/s 0 err/s Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support") Signed-off-by: Roger Quadros <rogerq@kernel.org> Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-1-ec6b1f7f1aca@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13LoongArch: KVM: Set host with kernel mode when switch to VM modeBibo Mao
PRMD register is only meaningful on the beginning stage of exception entry, and it is overwritten with nested irq or exception. When CPU runs in VM mode, interrupt need be enabled on host. And the mode for host had better be kernel mode rather than random or user mode. When VM is running, the running mode with top command comes from CRMD register, and running mode should be kernel mode since kernel function is executing with perf command. It needs be consistent with both top and perf command. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-02-13LoongArch: KVM: Remove duplicated cache attribute settingBibo Mao
Cache attribute comes from GPA->HPA secondary mmu page table and is configured when kvm is enabled. It is the same for all VMs, so remove duplicated cache attribute setting on vCPU context switch. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-02-13LoongArch: KVM: Fix typo issue about GCFG feature detectionBibo Mao
This is typo issue and misusage about GCFG feature macro. The code is wrong, only that it does not cause obvious problem since GCFG is set again on vCPU context switch. Fixes: 0d0df3c99d4f ("LoongArch: KVM: Implement kvm hardware enable, disable interface") Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-02-13LoongArch: csum: Fix OoB access in IP checksum code for negative lengthsYuli Wang
Commit 69e3a6aa6be2 ("LoongArch: Add checksum optimization for 64-bit system") would cause an undefined shift and an out-of-bounds read. Commit 8bd795fedb84 ("arm64: csum: Fix OoB access in IP checksum code for negative lengths") fixes the same issue on ARM64. Fixes: 69e3a6aa6be2 ("LoongArch: Add checksum optimization for 64-bit system") Co-developed-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: Yuli Wang <wangyuli@uniontech.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-02-13LoongArch: Remove the deprecated notifier hook mechanismYuli Wang
The notifier hook mechanism in proc and cpuinfo is actually unnecessary for LoongArch because it's not used anywhere. It was originally added to the MIPS code in commit d6d3c9afaab4 ("MIPS: MT: proc: Add support for printing VPE and TC ids"), and LoongArch then inherited it. But as the kernel code stands now, this notifier hook mechanism doesn't really make sense for either LoongArch or MIPS. In addition, the seq_file forward declaration needs to be moved to its proper place, as only the show_ipi_list() function in smp.c requires it. Co-developed-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: Yuli Wang <wangyuli@uniontech.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
generated by cgit (git 2.34.1) at 2025-09-14 15:04:09 +0000