| Age | Commit message (Collapse) | Author |
|---|
|
The CAN FD IP found on RZ/G2L SoC has some HW features different to that
of R-Car. For example, it has multiple resets and multiple IRQs for global
and channel interrupts. Also, it does not have ECC error flag registers
and clk post divider present on R-Car. Similarly, R-Car V3U has 8 channels
whereas other SoCs has only 2 channels.
This patch adds the struct rcar_canfd_hw_info to take care of the
HW feature differences and driver data present on both IPs. It also
replaces the driver data chip type with struct rcar_canfd_hw_info by
moving chip type to it.
Whilst started using driver data instead of chip_id for detecting
R-Car V3U SoCs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/20221027082158.95895-2-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
variable declaration
Fix coding style by removing empty lines in variable declaration.
Fixes: 39d3df6b0ea8 ("can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming")
Cc: Jimmy Assarsson <extja@kvaser.com>
Cc: Anssi Hannula <anssi.hannula@bitwise.fi>
Link: https://lore.kernel.org/all/20221031114513.81214-2-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
warning for err
The variable err is initialized, but the initialized value is
Overwritten before it is read. Fix the warning by not initializing the
variable err at all.
Fixes: 39d3df6b0ea8 ("can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming")
Cc: Jimmy Assarsson <extja@kvaser.com>
Cc: Anssi Hannula <anssi.hannula@bitwise.fi>
Link: https://lore.kernel.org/all/20221031114513.81214-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
ipsec-next 2022-12-09
1) Add xfrm packet offload core API.
From Leon Romanovsky.
2) Add xfrm packet offload support for mlx5.
From Leon Romanovsky and Raed Salem.
3) Fix a typto in a error message.
From Colin Ian King.
* tag 'ipsec-next-2022-12-09' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: (38 commits)
xfrm: Fix spelling mistake "oflload" -> "offload"
net/mlx5e: Open mlx5 driver to accept IPsec packet offload
net/mlx5e: Handle ESN update events
net/mlx5e: Handle hardware IPsec limits events
net/mlx5e: Update IPsec soft and hard limits
net/mlx5e: Store all XFRM SAs in Xarray
net/mlx5e: Provide intermediate pointer to access IPsec struct
net/mlx5e: Skip IPsec encryption for TX path without matching policy
net/mlx5e: Add statistics for Rx/Tx IPsec offloaded flows
net/mlx5e: Improve IPsec flow steering autogroup
net/mlx5e: Configure IPsec packet offload flow steering
net/mlx5e: Use same coding pattern for Rx and Tx flows
net/mlx5e: Add XFRM policy offload logic
net/mlx5e: Create IPsec policy offload tables
net/mlx5e: Generalize creation of default IPsec miss group and rule
net/mlx5e: Group IPsec miss handles into separate struct
net/mlx5e: Make clear what IPsec rx_err does
net/mlx5e: Flatten the IPsec RX add rule path
net/mlx5e: Refactor FTE setup code to be more clear
net/mlx5e: Move IPsec flow table creation to separate function
...
====================
Link: https://lore.kernel.org/r/20221209093310.4018731-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the resource size changes, the return value of the
'nla_put_u64_64bit' function is not checked. That has been fixed to avoid
rechecking at the next step.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Note that this is harmless, we'd error out at the next put().
Signed-off-by: Ilia.Gavrilov <Ilia.Gavrilov@infotecs.ru>
Link: https://lore.kernel.org/r/20221208082821.3927937-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzkaller reported:
BUG: KASAN: slab-out-of-bounds in __build_skb_around+0x235/0x340 net/core/skbuff.c:294
Write of size 32 at addr ffff88802aa172c0 by task syz-executor413/5295
For bpf_prog_test_run_skb(), which uses a kmalloc()ed buffer passed to
build_skb().
When build_skb() is passed a frag_size of 0, it means the buffer came
from kmalloc. In these cases, ksize() is used to find its actual size,
but since the allocation may not have been made to that size, actually
perform the krealloc() call so that all the associated buffer size
checking will be correctly notified (and use the "new" pointer so that
compiler hinting works correctly). Split this logic out into a new
interface, slab_build_skb(), but leave the original 0 checking for now
to catch any stragglers.
Reported-by: syzbot+fda18eaa8c12534ccb3b@syzkaller.appspotmail.com
Link: https://groups.google.com/g/syzkaller-bugs/c/UnIKxTtU5-0/m/-wbXinkgAQAJ
Fixes: 38931d8989b5 ("mm: Make ksize() a reporting-only function")
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: pepsipu <soopthegoop@gmail.com>
Cc: syzbot+fda18eaa8c12534ccb3b@syzkaller.appspotmail.com
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: kasan-dev <kasan-dev@googlegroups.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: ast@kernel.org
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hao Luo <haoluo@google.com>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: jolsa@kernel.org
Cc: KP Singh <kpsingh@kernel.org>
Cc: martin.lau@linux.dev
Cc: Stanislav Fomichev <sdf@google.com>
Cc: song@kernel.org
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221208060256.give.994-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function dmadesc_get_addr() is defined in the bcmgenet.c file, but
not called elsewhere, so remove this unused function.
drivers/net/ethernet/broadcom/genet/bcmgenet.c:120:26: warning: unused function 'dmadesc_get_addr'.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3401
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221209033723.32452-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mat Martineau says:
====================
mptcp: Miscellaneous cleanup
Two code cleanup patches for the 6.2 merge window that don't change
behavior:
Patch 1 makes proper use of nlmsg_free(), as suggested by Jakub while
reviewing f8c9dfbd875b ("mptcp: add pm listener events").
Patch 2 clarifies success status in a few mptcp functions, which
prevents some smatch false positives.
====================
Link: https://lore.kernel.org/r/20221209004431.143701-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When 'err' is 0, it looks clearer to return '0' instead of the variable
called 'err'.
The behaviour is then not modified, just a clearer code.
By doing this, we can also avoid false positive smatch warnings like
this one:
net/mptcp/pm_netlink.c:1169 mptcp_pm_parse_pm_addr_attr() warn: missing error code? 'err'
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use nlmsg_free() instead of kfree_skb() in pm_netlink.c.
The SKB's have been created by nlmsg_new(). The proper cleaning way
should then be done with nlmsg_free().
For the moment, nlmsg_free() is simply calling kfree_skb() so we don't
change the behaviour here.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2022-12-08
1) Support range match action in SW steering
Yevgeny Kliteynik says:
=======================
The following patch series adds support for a range match action in
SW Steering.
SW steering is able to match only on the exact values of the packet fields,
as requested by the user: the user provides mask for the fields that are of
interest, and the exact values to be matched on when the traffic is handled.
The following patch series add new type of action - Range Match, where the
user provides a field to be matched on and a range of values (min to max)
that will be considered as hit.
There are several new notions that were implemented in order to support
Range Match:
- MATCH_RANGES Steering Table Entry (STE): the new STE type that allows
matching the packets' fields on the range of values instead of a specific
value.
- Match Definer: this is a general FW object that defines which fields
in the packet will be referenced by the mask and tag of each STE.
Match definer ID is part of STE fields, and it defines how the HW needs
to interpret the STE's mask/tag values.
Till now SW steering used the definers that were managed by FW and
implemented the STE layout as described by the HW spec.
Now that we're adding a new type of STE, SW steering needs to also be
able to define this new STE's layout, and this is do
=======================
2) From OZ add support for meter mtu offload
2.1: Refactor the code to allow both metering and range post actions as a
pre-step for adding police mtu offload support.
2.2: Instantiate mtu green/red flow tables with a single match-all rule.
Add the green/red actions to the hit/miss table accordingly
2.3: Initialize the meter object with the TC police mtu parameter.
Use the hardware range match action feature.
3) From MaorD, support routes with more than 2 nexthops in multipath
4) Michael and Or, improve and extend vport representor counters.
* tag 'mlx5-updates-2022-12-08' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Expose steering dropped packets counter
net/mlx5: Refactor and expand rep vport stat group
net/mlx5e: multipath, support routes with more than 2 nexthops
net/mlx5e: TC, add support for meter mtu offload
net/mlx5e: meter, add mtu post meter tables
net/mlx5e: meter, refactor to allow multiple post meter tables
net/mlx5: DR, Add support for range match action
net/mlx5: DR, Add function that tells if STE miss addr has been initialized
net/mlx5: DR, Some refactoring of miss address handling
net/mlx5: DR, Manage definers with refcounts
net/mlx5: DR, Handle FT action in a separate function
net/mlx5: DR, Rework is_fw_table function
net/mlx5: DR, Add functions to create/destroy MATCH_DEFINER general object
net/mlx5: fs, add match on ranges API
net/mlx5: mlx5_ifc updates for MATCH_DEFINER general object
====================
Link: https://lore.kernel.org/r/20221209001420.142794-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-12-08 (ice)
Jacob Keller says:
This series of patches primarily consists of changes to fix some corner
cases that can cause Tx timestamp failures. The issues were discovered and
reported by Siddaraju DH and primarily affect E822 hardware, though this
series also includes some improvements that affect E810 hardware as well.
The primary issue is regarding the way that E822 determines when to generate
timestamp interrupts. If the driver reads timestamp indexes which do not
have a valid timestamp, the E822 interrupt tracking logic can get stuck.
This is due to the way that E822 hardware tracks timestamp index reads
internally. I was previously unaware of this behavior as it is significantly
different in E810 hardware.
Most of the fixes target refactors to ensure that the ice driver does not
read timestamp indexes which are not valid on E822 hardware. This is done by
using the Tx timestamp ready bitmap register from the PHY. This register
indicates what timestamp indexes have outstanding timestamps waiting to be
captured.
Care must be taken in all cases where we read the timestamp registers, and
thus all flows which might have read these registers are refactored. The
ice_ptp_tx_tstamp function is modified to consolidate as much of the logic
relating to these registers as possible. It now handles discarding stale
timestamps which are old or which occurred after a PHC time update. This
replaces previously standalone thread functions like the periodic work
function and the ice_ptp_flush_tx_tracker function.
In addition, some minor cleanups noticed while writing these refactors are
included.
The remaining patches refactor the E822 implementation to remove the
"bypass" mode for timestamps. The E822 hardware has the ability to provide a
more precise timestamp by making use of measurements of the precise way that
packets flow through the hardware pipeline. These measurements are known as
"Vernier" calibration. The "bypass" mode disables many of these measurements
in favor of a faster start up time for Tx and Rx timestamping. Instead, once
these measurements were captured, the driver tries to reconfigure the PHY to
enable the vernier calibrations.
Unfortunately this recalibration does not work. Testing indicates that the
PHY simply remains in bypass mode without the increased timestamp precision.
Remove the attempt at recalibration and always use vernier mode. This has
one disadvantage that Tx and Rx timestamps cannot begin until after at least
one packet of that type goes through the hardware pipeline. Because of this,
further refactor the driver to separate Tx and Rx vernier calibration.
Complete the Tx and Rx independently, enabling the appropriate type of
timestamp as soon as the relevant packet has traversed the hardware
pipeline. This was reported by Milena Olech.
Note that although these might be considered "bug fixes", the required
changes in order to appropriately resolve these issues is large. Thus it
does not feel suitable to send this series to net.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: reschedule ice_ptp_wait_for_offset_valid during reset
ice: make Tx and Rx vernier offset calibration independent
ice: only check set bits in ice_ptp_flush_tx_tracker
ice: handle flushing stale Tx timestamps in ice_ptp_tx_tstamp
ice: cleanup allocations in ice_ptp_alloc_tx_tracker
ice: protect init and calibrating check in ice_ptp_request_ts
ice: synchronize the misc IRQ when tearing down Tx tracker
ice: check Tx timestamp memory register for ready timestamps
ice: handle discarding old Tx requests in ice_ptp_tx_tstamp
ice: always call ice_ptp_link_change and make it void
ice: fix misuse of "link err" with "link status"
ice: Reset TS memory for all quads
ice: Remove the E822 vernier "bypass" logic
ice: Use more generic names for ice_ptp_tx fields
====================
Link: https://lore.kernel.org/r/20221208213932.1274143-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add documentation for the BPF_MAP_TYPE_SK_STORAGE including
kernel version introduced, usage and examples.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221209112401.69319-1-donald.hunter@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add support to count upall packets, when kmod of openvswitch
upcall to count the number of packets for upcall succeed and
failed, which is a better way to see how many packets upcalled
on every interfaces.
Signed-off-by: wangchuanlei <wangchuanlei@inspur.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rhashtable currently only does bh-safe synchronization making it impossible
to use from irq-safe contexts. Switch it to use irq-safe synchronization to
remove the restriction.
v2: Update the lock functions to return the ulong flags value and unlock
functions to take the value directly instead of passing around the
pointer. Suggested by Linus.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Acked-by: Josh Don <joshdon@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Barret Rhoden <brho@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pedro Tammela says:
====================
net/sched: retpoline wrappers for tc
In tc all qdics, classifiers and actions can be compiled as modules.
This results today in indirect calls in all transitions in the tc hierarchy.
Due to CONFIG_RETPOLINE, CPUs with mitigations=on might pay an extra cost on
indirect calls. For newer Intel cpus with IBRS the extra cost is
nonexistent, but AMD Zen cpus and older x86 cpus still go through the
retpoline thunk.
Known built-in symbols can be optimized into direct calls, thus
avoiding the retpoline thunk. So far, tc has not been leveraging this
build information and leaving out a performance optimization for some
CPUs. In this series we wire up 'tcf_classify()' and 'tcf_action_exec()'
with direct calls when known modules are compiled as built-in as an
opt-in optimization.
We measured these changes in one AMD Zen 4 cpu (Retpoline), one AMD Zen 3 cpu (Retpoline),
one Intel 10th Gen CPU (IBRS), one Intel 3rd Gen cpu (Retpoline) and one
Intel Xeon CPU (IBRS) using pktgen with 64b udp packets. Our test setup is a
dummy device with clsact and matchall in a kernel compiled with every
tc module as built-in. We observed a 3-8% speed up on the retpoline CPUs,
when going through 1 tc filter, and a 60-100% speed up when going through 100 filters.
For the IBRS cpus we observed a 1-2% degradation in both scenarios, we believe
the extra branches check introduced a small overhead therefore we added
a static key that bypasses the wrapper on kernels not using the retpoline mitigation,
but compiled with CONFIG_RETPOLINE.
1 filter:
CPU | before (pps) | after (pps) | diff
R9 7950X | 5914980 | 6380227 | +7.8%
R9 5950X | 4237838 | 4412241 | +4.1%
R9 5950X | 4265287 | 4413757 | +3.4% [*]
i5-3337U | 1580565 | 1682406 | +6.4%
i5-10210U | 3006074 | 3006857 | +0.0%
i5-10210U | 3160245 | 3179945 | +0.6% [*]
Xeon 6230R | 3196906 | 3197059 | +0.0%
Xeon 6230R | 3190392 | 3196153 | +0.01% [*]
100 filters:
CPU | before (pps) | after (pps) | diff
R9 7950X | 373598 | 820396 | +119.59%
R9 5950X | 313469 | 633303 | +102.03%
R9 5950X | 313797 | 633150 | +101.77% [*]
i5-3337U | 127454 | 211210 | +65.71%
i5-10210U | 389259 | 381765 | -1.9%
i5-10210U | 408812 | 412730 | +0.9% [*]
Xeon 6230R | 415420 | 406612 | -2.1%
Xeon 6230R | 416705 | 405869 | -2.6% [*]
[*] In these tests we ran pktgen with clone set to 1000.
On the 7950x system we also tested the impact of filters if iteration order
placement varied, first by compiling a kernel with the filter under test being
the first one in the static iteration and then repeating it with being last (of 15 classifiers existing today).
We saw a difference of +0.5-1% in pps between being the first in the iteration vs being the last.
Therefore we order the classifiers and actions according to relevance per our current thinking.
v5->v6:
- Address Eric Dumazet suggestions
v4->v5:
- Rebase
v3->v4:
- Address Eric Dumazet suggestions
v2->v3:
- Address suggestions by Jakub, Paolo and Eric
- Dropped RFC tag (I forgot to add it on v2)
v1->v2:
- Fix build errors found by the bots
- Address Kuniyuki Iwashima suggestions
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Expose the necessary tc classifier functions and wire up cls_api to use
direct calls in retpoline kernels.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Expose the necessary tc act functions and wire up act_api to use
direct calls in retpoline kernels.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On kernels using retpoline as a spectrev2 mitigation,
optimize actions and filters that are compiled as built-ins into a direct call.
On subsequent patches we expose the classifiers and actions functions
and wire up the wrapper into tc.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The type definition should be visible even in configurations not using
CONFIG_NET_CLS_ACT.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a spelling mistake in a NL_SET_ERR_MSG message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Leon Romanovsky says:
============
This is second part with implementation of packet offload.
============
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Delete a few lines of "depends on PHYLIB" since they are inside
an "if PHYLIB / endif # PHYLIB" block, i.e., they are redundant
and the other 50+ drivers there don't use "depends on PHYLIB"
since it is not needed.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://lore.kernel.org/r/20221207044257.30036-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an option to initialize SOF_TIMESTAMPING_OPT_ID for TCP from
write_seq sockets instead of snd_una.
This should have been the behavior from the start. Because processes
may now exist that rely on the established behavior, do not change
behavior of the existing option, but add the right behavior with a new
flag. It is encouraged to always set SOF_TIMESTAMPING_OPT_ID_TCP on
stream sockets along with the existing SOF_TIMESTAMPING_OPT_ID.
Intuitively the contract is that the counter is zero after the
setsockopt, so that the next write N results in a notification for
the last byte N - 1.
On idle sockets snd_una == write_seq and this holds for both. But on
sockets with data in transmission, snd_una records the unacked offset
in the stream. This depends on the ACK response from the peer. A
process cannot learn this in a race free manner (ioctl SIOCOUTQ is one
racy approach).
write_seq records the offset at the last byte written by the process.
This is a better starting point. It matches the intuitive contract in
all circumstances, unaffected by external behavior.
The new timestamp flag necessitates increasing sk_tsflags to 32 bits.
Move the field in struct sock to avoid growing the socket (for some
common CONFIG variants). The UAPI interface so_timestamping.flags is
already int, so 32 bits wide.
Reported-by: Sotirios Delimanolis <sotodel@meta.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20221207143701.29861-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lorenzo Bianconi says:
====================
fix possible deadlock during WED attach
Fix a possible deadlock in mtk_wed_attach if mtk_wed_wo_init routine fails.
Check wo pointer is properly allocated before running mtk_wed_wo_reset() and
mtk_wed_wo_deinit().
====================
Link: https://lore.kernel.org/r/cover.1670421354.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce __mtk_wed_detach() in order to avoid a deadlock in
mtk_wed_attach routine if mtk_wed_wo_init fails since both
mtk_wed_attach and mtk_wed_detach run holding hw_lock mutex.
Fixes: 4c5de09eb0d0 ("net: ethernet: mtk_wed: add configure wed wo support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix possible NULL pointer dereference in mtk_wed_detach routine checking
wo pointer is properly allocated before running mtk_wed_wo_reset() and
mtk_wed_wo_deinit().
Even if it is just a theoretical issue at the moment check wo pointer is
not NULL in mtk_wed_mcu_msg_update.
Moreover, honor mtk_wed_mcu_send_msg return value in mtk_wed_wo_reset()
Fixes: 799684448e3e ("net: ethernet: mtk_wed: introduce wed wo support")
Fixes: 4c5de09eb0d0 ("net: ethernet: mtk_wed: add configure wed wo support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a spelling mistake in a nn_dp_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20221207094312.2281493-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The BPF Makefile in net/bpf did incorrect path substitution for O=dir
builds, e.g.
make O=/tmp/kselftest headers
make O=/tmp/kselftest -C tools/testing/selftests
would fail in selftest builds [1] net/ with
clang-16: error: no such file or directory: 'kselftest/net/bpf/nat6to4.c'
clang-16: error: no input files
Add a pattern prerequisite and an order-only-prerequisite (for
creating the directory), to resolve the issue.
[1] https://lore.kernel.org/all/202212060009.34CkQmCN-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 837a3d66d698 ("selftests: net: Add cross-compilation support for BPF programs")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20221206102838.272584-1-bjorn@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Petr Machata says:
====================
mlxsw: Add Spectrum-1 ip6gre support
Ido Schimmel writes:
Currently, mlxsw only supports ip6gre offload on Spectrum-2 and newer
ASICs. Spectrum-1 can also offload ip6gre tunnels, but it needs double
entry router interfaces (RIFs) for the RIFs representing these tunnels.
In addition, the RIF index needs to be even. This is handled in
patches #1-#3.
The implementation can otherwise be shared between all Spectrum
generations. This is handled in patches #4-#5.
Patch #6 moves a mlxsw ip6gre selftest to a shared directory, as ip6gre
is no longer only supported on Spectrum-2 and newer ASICs.
This work is motivated by users that require multiple GRE tunnels that
all share the same underlay VRF. Currently, mlxsw only supports
decapsulation based on the underlay destination IP (i.e., not taking the
GRE key into account), so users need to configure these tunnels with
different source IPs and IPv6 addresses are easier to spare than IPv4.
Tested using existing ip6gre forwarding selftests.
====================
Link: https://lore.kernel.org/r/cover.1670414573.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that Spectrum-1 gained ip6gre support we can move the test out of
the Spectrum-2 directory.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained in the previous patch, the existing Spectrum-2 ip6gre
implementation can be reused for Spectrum-1. Change the Spectrum-1
ip6gre operations structure to use the common operations.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are two main differences between Spectrum-1 and newer ASICs in
terms of IP-in-IP support:
1. In Spectrum-1, RIFs representing ip6gre tunnels require two entries
in the RIF table.
2. In Spectrum-2 and newer ASICs, packets ingress the underlay (during
encapsulation) and egress the underlay (during decapsulation) via a
special generic loopback RIF.
The first difference was handled in previous patches by adding the
'double_rif_entry' field to the Spectrum-1 operations structure of
ip6gre RIFs. The second difference is handled during RIF creation, by
only creating a generic loopback RIF in Spectrum-2 and newer ASICs.
Therefore, the ip6gre operations can be shared between Spectrum-1 and
newer ASIC in a similar fashion to how the ipgre operations are shared.
Rename the operations to not be Spectrum-2 specific and move them
earlier in the file so that they could later be used for Spectrum-1.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In Spectrum-1, loopback router interfaces (RIFs) used for IP-in-IP
encapsulation with an IPv6 underlay require two RIF entries and the RIF
index must be even.
Prepare for this change by extending the RIF parameters structure with a
'double_entry' field that indicates if the RIF being created requires
two RIF entries or not. Only set it for RIFs representing ip6gre tunnels
in Spectrum-1.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, each router interface (RIF) consumes one entry in the RIFs
table. This is going to change in subsequent patches where some RIFs
will consume two table entries.
Prepare for this change by parametrizing the RIF allocation size. For
now, always pass '1'.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, each router interface (RIF) consumes one entry in the RIFs
table and there are no alignment constraints. This is going to change in
subsequent patches where some RIFs will consume two table entries and
their indexes will need to be aligned to the allocation size (even).
Prepare for this change by converting the RIF index allocation to use
gen_pool with the 'gen_pool_first_fit_order_align' algorithm.
No Kconfig changes necessary as mlxsw already selects
'GENERIC_ALLOCATOR'.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kumar Kartikeya Dwivedi says:
====================
This is part 1 of https://lore.kernel.org/bpf/20221018135920.726360-1-memxor@gmail.com.
This thread also gives some background on why the refactor is being done:
https://lore.kernel.org/bpf/CAEf4Bzb4beTHgVo+G+jehSj8oCeAjRbRcm6MRe=Gr+cajRBwEw@mail.gmail.com
As requested in patch 6 by Alexei, it only includes patches which
refactors the code, on top of which further fixes will be made in part
2. The refactor itself fixes another issue as a side effect. No
functional change is intended (except a few modified log messages).
Changelog:
----------
v1 -> v2
v1: https://lore.kernel.org/bpf/20221115000130.1967465-1-memxor@gmail.com
* Address feedback from Joanne and David, add acks
Fixes v1 -> v1
Fixes v1: https://lore.kernel.org/bpf/20221018135920.726360-1-memxor@gmail.com
* Collect acks from Joanne and David
* Fix misc nits pointed out by Joanne, David
* Split move of reg->off alignment check for dynptr into separate
change (Alexei)
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The original support for bpf_user_ringbuf_drain callbacks simply
short-circuited checks for the dynptr state, allowing users to pass
PTR_TO_DYNPTR (now CONST_PTR_TO_DYNPTR) to helpers that initialize a
dynptr. This bug would have also surfaced with other dynptr helpers in
the future that changed dynptr view or modified it in some way.
Include test cases for all cases, i.e. both bpf_dynptr_from_mem and
bpf_ringbuf_reserve_dynptr, and ensure verifier rejects both of them.
Without the fix, both of these programs load and pass verification.
While at it, remove sys_nanosleep target from failure cases' SEC
definition, as there is no such tracepoint.
Acked-by: David Vernet <void@manifault.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207204141.308952-8-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
It may happen that destination buffer memory overlaps with memory dynptr
points to. Hence, we must use memmove to correctly copy from dynptr to
destination buffer, or source buffer to dynptr.
This actually isn't a problem right now, as memcpy implementation falls
back to memmove on detecting overlap and warns about it, but we
shouldn't be relying on that.
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207204141.308952-7-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After previous commit, we are minimizing helper specific assumptions
from check_func_arg_reg_off, making it generic, and offloading checks
for a specific argument type to their respective functions called after
check_func_arg_reg_off has been called.
This allows relying on a consistent set of guarantees after that call
and then relying on them in code that deals with registers for each
argument type later. This is in line with how process_spin_lock,
process_timer_func, process_kptr_func check reg->var_off to be constant.
The same reasoning is used here to move the alignment check into
process_dynptr_func. Note that it also needs to check for constant
var_off, and accumulate the constant var_off when computing the spi in
get_spi, but that fix will come in later changes.
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207204141.308952-6-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
While check_func_arg_reg_off is the place which performs generic checks
needed by various candidates of reg->type, there is some handling for
special cases, like ARG_PTR_TO_DYNPTR, OBJ_RELEASE, and
ARG_PTR_TO_RINGBUF_MEM.
This commit aims to streamline these special cases and instead leave
other things up to argument type specific code to handle. The function
will be restrictive by default, and cover all possible cases when
OBJ_RELEASE is set, without having to update the function again (and
missing to do that being a bug).
This is done primarily for two reasons: associating back reg->type to
its argument leaves room for the list getting out of sync when a new
reg->type is supported by an arg_type.
The other case is ARG_PTR_TO_RINGBUF_MEM. The problem there is something
we already handle, whenever a release argument is expected, it should
be passed as the pointer that was received from the acquire function.
Hence zero fixed and variable offset.
There is nothing special about ARG_PTR_TO_RINGBUF_MEM, where technically
its target register type PTR_TO_MEM | MEM_RINGBUF can already be passed
with non-zero offset to other helper functions, which makes sense.
Hence, lift the arg_type_is_release check for reg->off and cover all
possible register types, instead of duplicating the same kind of check
twice for current OBJ_RELEASE arg_types (alloc_mem and ptr_to_btf_id).
For the release argument, arg_type_is_dynptr is the special case, where
we go to actual object being freed through the dynptr, so the offset of
the pointer still needs to allow fixed and variable offset and
process_dynptr_func will verify them later for the release argument case
as well.
This is not specific to ARG_PTR_TO_DYNPTR though, we will need to make
this exception for any future object on the stack that needs to be
released. In this sense, PTR_TO_STACK as a candidate for object on stack
argument is a special case for release offset checks, and they need to
be done by the helper releasing the object on stack.
Since the check has been lifted above all register type checks, remove
the duplicated check that is being done for PTR_TO_BTF_ID.
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207204141.308952-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Recently, user ringbuf support introduced a PTR_TO_DYNPTR register type
for use in callback state, because in case of user ringbuf helpers,
there is no dynptr on the stack that is passed into the callback. To
reflect such a state, a special register type was created.
However, some checks have been bypassed incorrectly during the addition
of this feature. First, for arg_type with MEM_UNINIT flag which
initialize a dynptr, they must be rejected for such register type.
Secondly, in the future, there are plans to add dynptr helpers that
operate on the dynptr itself and may change its offset and other
properties.
In all of these cases, PTR_TO_DYNPTR shouldn't be allowed to be passed
to such helpers, however the current code simply returns 0.
The rejection for helpers that release the dynptr is already handled.
For fixing this, we take a step back and rework existing code in a way
that will allow fitting in all classes of helpers and have a coherent
model for dealing with the variety of use cases in which dynptr is used.
First, for ARG_PTR_TO_DYNPTR, it can either be set alone or together
with a DYNPTR_TYPE_* constant that denotes the only type it accepts.
Next, helpers which initialize a dynptr use MEM_UNINIT to indicate this
fact. To make the distinction clear, use MEM_RDONLY flag to indicate
that the helper only operates on the memory pointed to by the dynptr,
not the dynptr itself. In C parlance, it would be equivalent to taking
the dynptr as a point to const argument.
When either of these flags are not present, the helper is allowed to
mutate both the dynptr itself and also the memory it points to.
Currently, the read only status of the memory is not tracked in the
dynptr, but it would be trivial to add this support inside dynptr state
of the register.
With these changes and renaming PTR_TO_DYNPTR to CONST_PTR_TO_DYNPTR to
better reflect its usage, it can no longer be passed to helpers that
initialize a dynptr, i.e. bpf_dynptr_from_mem, bpf_ringbuf_reserve_dynptr.
A note to reviewers is that in code that does mark_stack_slots_dynptr,
and unmark_stack_slots_dynptr, we implicitly rely on the fact that
PTR_TO_STACK reg is the only case that can reach that code path, as one
cannot pass CONST_PTR_TO_DYNPTR to helpers that don't set MEM_RDONLY. In
both cases such helpers won't be setting that flag.
The next patch will add a couple of selftest cases to make sure this
doesn't break.
Fixes: 205715673844 ("bpf: Add bpf_user_ringbuf_drain() helper")
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207204141.308952-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, we simply ignore the errors in process_spin_lock,
process_timer_func, process_kptr_func, process_dynptr_func. Instead,
bubble up the error by storing and checking err variable.
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207204141.308952-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
ARG_PTR_TO_DYNPTR is akin to ARG_PTR_TO_TIMER, ARG_PTR_TO_KPTR, where
the underlying register type is subjected to more special checks to
determine the type of object represented by the pointer and its state
consistency.
Move dynptr checks to their own 'process_dynptr_func' function so that
is consistent and in-line with existing code. This also makes it easier
to reuse this code for kfunc handling.
Then, reuse this consolidated function in kfunc dynptr handling too.
Note that for kfuncs, the arg_type constraint of DYNPTR_TYPE_LOCAL has
been lifted.
Acked-by: David Vernet <void@manifault.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207204141.308952-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hou Tao says:
====================
From: Hou Tao <houtao1@huawei.com>
Hi,
The patchset is just misc optimizations for bpf mem allocator. Patch 1
fixes the OOM problem found during running hash-table update benchmark
from qp-trie patchset [0]. The benchmark will add htab elements in
batch and then delete elements in batch, so freed objects will stack on
free_by_rcu and wait for the expiration of RCU grace period. There can
be tens of thousands of freed objects and these objects are not
available for new allocation, so adding htab element will continue to do
new allocation.
For the benchmark commmand: "./bench -w3 -d10 -a htab-update -p 16",
even the maximum entries of htab is 16384, key_size is 255 and
value_size is 4, the peak memory usage will reach 14GB or more.
Increasing rcupdate.rcu_task_enqueue_lim will decrease the peak memory to
860MB, but it is still too many. Although the above case is contrived,
it is better to fix it and the fixing is simple: just reusing the freed
objects in free_by_rcu during allocation. After the fix, the peak memory
usage will decrease to 26MB. Beside above case, the memory blow-up
problem is also possible when allocation and freeing are done on total
different CPUs. I'm trying to fix the blow-up problem by using a global
per-cpu work to free these objects in free_by_rcu timely, but it doesn't
work very well and I am still digging into it.
Patch 2 is a left-over patch from rcu_trace_implies_rcu_gp() patchset
[1]. After disscussing with Paul [2], I think it is also safe to skip
rcu_barrier() when rcu_trace_implies_rcu_gp() returns true.
Comments are always welcome.
Change Log:
v2:
* Patch 1: repharse the commit message (Suggested by Yonghong & Alexei)
* Add Acked-by for both patch 1 and 2
v1: https://lore.kernel.org/bpf/20221206042946.686847-1-houtao@huaweicloud.com
[0]: https://lore.kernel.org/bpf/20220924133620.4147153-13-houtao@huaweicloud.com/
[1]: https://lore.kernel.org/bpf/20221014113946.965131-1-houtao@huaweicloud.com/
[2]: https://lore.kernel.org/bpf/20221021185002.GP5600@paulmck-ThinkPad-P17-Gen-1/
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
If there are pending rcu callback, free_mem_alloc() will use
rcu_barrier_tasks_trace() and rcu_barrier() to wait for the pending
__free_rcu_tasks_trace() and __free_rcu() callback.
If rcu_trace_implies_rcu_gp() is true, there will be no pending
__free_rcu(), so it will be OK to skip rcu_barrier() as well.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20221209010947.3130477-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When there are batched freeing operations on a specific CPU, part of
the freed elements ((high_watermark - lower_watermark) / 2 + 1) will be
indirectly moved into waiting_for_gp list through free_by_rcu list.
After call_rcu_in_progress becomes false again, the remaining elements
in free_by_rcu list will be moved to waiting_for_gp list by the next
invocation of free_bulk(). However if the expiration of RCU tasks trace
grace period is relatively slow, none element in free_by_rcu list will
be moved.
So instead of invoking __alloc_percpu_gfp() or kmalloc_node() to
allocate a new object, in alloc_bulk() just check whether or not there is
freed element in free_by_rcu list and reuse it if available.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20221209010947.3130477-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add rx steering discarded packets counter to the vnic_diag debugfs.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Expand representor vport stat group to support all counters from the
vport stat group, to count all the traffic passing through the vport.
Fix current implementation where fill_stats and update_stats use
different structs.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
