summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-08-25scsi: cxlflash: Avoid double mutex unlockMatthew R. Ochs
The AFU recovery routine uses an interruptible mutex to control the flow of in-flight recoveries. Upon receiving an interruptible signal the code branches to a common exit path which wrongly assumes the mutex is held. Add a local variable to track when the mutex should be unlocked. Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: cxlflash: Remove unnecessary existence checkMatthew R. Ochs
The AFU termination sequence has been refactored over time such that the main tear down routine, term_afu(), can no longer can be invoked with a NULL AFU pointer. Remove the unnecessary existence check from term_afu(). Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: ibmvfc: ibmvscsi: ibmvscsi_tgt: constify vio_device_idArvind Yadav
vio_device_id are not supposed to change at runtime. All functions working with vio_device_id provided by <asm/vio.h> work with const vio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: Fix the kerneldoc for scsi_initialize_rq()Jonathan Corbet
The kerneldoc comment for scsi_initialize_rq() neglected to document the "rq" parameter, leading to this docs build warning: ./drivers/scsi/scsi_lib.c:1116: warning: No description found for parameter 'rq' Document the parameter and make the build slightly quieter. [mkp: used wording suggested by Bart] Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: ses: Fix racy cleanup of /sys in remove_dev()Calvin Owens
Currently we free the resources backing the enclosure device before we call device_unregister(). This is racy: during rmmod of low-level SCSI drivers that hook into enclosure, we end up with a small window of time during which writing to /sys can OOPS. Example trace with mpt3sas: general protection fault: 0000 [#1] SMP KASAN Modules linked in: mpt3sas(-) <...> RIP: [<ffffffffa0388a98>] ses_get_page2_descriptor.isra.6+0x38/0x220 [ses] Call Trace: [<ffffffffa0389d14>] ses_set_fault+0xf4/0x400 [ses] [<ffffffffa0361069>] set_component_fault+0xa9/0xf0 [enclosure] [<ffffffff8205bffc>] dev_attr_store+0x3c/0x70 [<ffffffff81677df5>] sysfs_kf_write+0x115/0x180 [<ffffffff81675725>] kernfs_fop_write+0x275/0x3a0 [<ffffffff8151f810>] __vfs_write+0xe0/0x3e0 [<ffffffff8152281f>] vfs_write+0x13f/0x4a0 [<ffffffff81526731>] SyS_write+0x111/0x230 [<ffffffff828b401b>] entry_SYSCALL_64_fastpath+0x13/0x94 Fortunately the solution is extremely simple: call device_unregister() before we free the resources, and the race no longer exists. The driver core holds a reference over ->remove_dev(), so AFAICT this is safe. Signed-off-by: Calvin Owens <calvinowens@fb.com> Acked-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: mptsas: Fixup device hotplug for VMWare ESXiHannes Reinecke
VMWare ESXi emulates an mptsas HBA, but exposes all drives as direct-attached SAS drives. This it not how the driver originally envisioned things; SAS drives were supposed to be connected via an expander, and only SATA drives would be direct attached. As such, any hotplug event for direct-attach SAS drives was silently ignored, and the guest failed to detect new drives from within a VMWare ESXi environment. [mkp: typos] Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1030850 Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: make device_type constBhumika Goyal
Make these const as they are only stored in the type field of a device structure, which is const. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: sd: remove duplicated setting of gd->minorsweiping zhang
gd->minors has been set when call alloc_disk() in sd_probe. Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: eata: remove 'arg_done' from eata2x_eh_host_reset()Hannes Reinecke
Just displaying some different information; drop it. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: visorhba: sanitze private device data allocationHannes Reinecke
There's no need to keep the private data for a device in a separate list; better to store it in ->hostdata and do away with the additional list. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: megaraid_mbox: drop duplicate bus reset and device reset functionHannes Reinecke
megaraid_mbox only has one reset function, and that is a host reset. So drop the duplicate bus reset and device reset functions. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: bnx2fc: remove obsolete bnx2fc_eh_host_reset() definitionHannes Reinecke
Never used anywhere. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: 53c700: move bus reset to host resetHannes Reinecke
bus reset always returns SUCCESS, meaning host reset was never tested. At the same time the only difference to the HBA is a missing call to NCR_700_chip_reset(). So add the missing call to bus reset, drop host reset, and move bus reset to host reset. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: aha152x: drop host resetHannes Reinecke
The driver has both a bus and a host reset, where the host reset does a bus reset followed by an attempt to reset the chip registers to a default state. However, as the bus reset always returned SUCCESS the host reset was never called, so the functionality of the register reset function was never validated. Additionally, tha AIC-6260 chip has a hard reset line, which actually should be preferred for a host reset. But I haven't found a way how this can be triggered via software, so take the safe approach and drop the host reset. [mkp: typo] Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: nsp32: drop bus resetHannes Reinecke
bus reset is a host reset without nsp32hw_init(), and will always return SUCCESS, thus disabling the use of host reset. So drop bus reset in favour of host reset. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: qedf: drop bus reset handlerHannes Reinecke
qedf has a host reset handler, but as the bus reset handler is a stub always returning SUCCESS the host reset is never invoked. So drop the bus reset handler. Signed-off-by: Hannes Reinecke <hare@suse.com> Tested-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: ppa: drop duplicate bus_reset handlerHannes Reinecke
bus_reset and host_reset are the same functions, so drop bus_reset. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: imm: drop duplicate bus_reset handlerHannes Reinecke
host_reset and bus_reset is the same function, so drop bus reset. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: qlogicfas: move bus_reset to host_resetHannes Reinecke
The bus reset handler is really a host reset. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: NCR5380: Move bus reset to host resetHannes Reinecke
The bus reset handler really is a host reset, so move it to eh_bus_reset_handler. Signed-off-by: Hannes Reinecke <hare@suse.com> Acked-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: acornscsi: move bus reset to host resetHannes Reinecke
The bus reset function is really a host reset, so move it to eh_host_reset_handler. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: qlogicpti: move bus reset to host resetHannes Reinecke
The bus reset function really is a host reset, so move it to eh_host_reset_handler(). Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: rtsx: drop bus reset functionHannes Reinecke
Function is a stub, so can as well be dropped. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: drop bus reset for wd33c93-compatible boardsHannes Reinecke
The bus reset function is just a wrapper calling host reset under the host lock. So move taking of the host lock into the host reset function and drop bus reset. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: fdomain: move bus reset to host resetHannes Reinecke
The bus reset function really is a host reset, so move it to eh_host_reset_handler(). Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: hptiop: Simplify reset handlingHannes Reinecke
The Highpoint driver only has one reset function, and that is a host reset. So stop pretending we're doing anything else. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: bfa: move bus reset to target resetHannes Reinecke
The bus reset handler is just calling target reset on all targets, which is exactly what SCSI EH will be doing anyway. So move the bus reset function to target reset and drop the loop. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: libsas: move bus_reset_handler() to target_reset_handler()Hannes Reinecke
The bus reset handler is calling I_T Nexus reset, which logically is a target reset as it need to specify both the initiator and the target. So move it to target reset. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: uas: move eh_bus_reset_handler to eh_device_reset_handlerHannes Reinecke
The bus_reset handler is really a device reset, so move it to eh_device_reset_handler(). Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: fnic: do not call host reset from command abortHannes Reinecke
Command abort already returns FAILED, which will then be escalated to a host reset. So no need to call host_reset directly. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: fc_fcp: do not call fc_block_scsi_eh() from host resetHannes Reinecke
When calling host reset we're resetting all ports anyway, so there is no point in waiting for the ports to become unblocked. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: ibmvfc: Do not call fc_block_scsi_eh() on host resetHannes Reinecke
When we're resetting the host any remote port states will be reset anyway, so it's pointless to wait for dev_loss_tmo during host reset. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: mptfc: Do not call fc_block_scsi_eh() on host resetHannes Reinecke
When we're resetting the host any remote port states will be reset anyway, so it's pointless to wait for dev_loss_tmo during host reset. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: fix comment in scsi_device_set_state()Hannes Reinecke
The function returns '0' if successful; with the original comment the function doesn't have a way to indicate success ... Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bart van Assche <bvanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: iscsi_tcp: Remove a set-but-not-used variableBart Van Assche
This patch avoids that gcc reports the following warning when building with W=1: drivers/scsi/iscsi_tcp.c:166:24: warning: variable ?session? set but not used [-Wunused-but-set-variable] Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Lee Duncan <lduncan@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: scsi_debug: Remove a set-but-not-used variableBart Van Assche
This patch avoids that gcc reports the following warning when building with W=1: drivers/scsi/scsi_debug.c:2264:15: warning: variable ?pcontrol? set but not used [-Wunused-but-set-variable] Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: scsi_transport_srp: Suppress a W=1 compiler warningBart Van Assche
Avoid that the following compiler warning is reported when building with W=1: drivers/scsi/scsi_transport_srp.c:92:19: warning: comparison is always false due to limited range of data type [-Wtype-limits] Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: scsi_transport_sas: Check kzalloc() return valueBart Van Assche
Check whether memory allocation succeeded before dereferencing the pointer to the allocated memory. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: libsas: Annotate fall-through in a switch statementBart Van Assche
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: libsas: Remove a set-but-not-used variableBart Van Assche
This was detected by building with W=1. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: libiscsi: Fix indentationBart Van Assche
This patch avoids that smatch reports the following: drivers/scsi/libiscsi.c:1081: iscsi_handle_reject() warn: inconsistent indenting Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: sg: Fix type of last blk_trace_setup() argumentBart Van Assche
Avoid that sparse reports the following: drivers/scsi/sg.c:1114:41: warning: incorrect type in argument 5 (different address spaces) drivers/scsi/sg.c:1114:41: expected char [noderef] <asn:1>*arg drivers/scsi/sg.c:1114:41: got char *<noident> This patch does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: sd: Remove a useless comparisonBart Van Assche
This patch avoids that gcc reports the following warning when building with W=1: drivers/scsi/sd.c:315:10: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] if (val >= 0 && val <= T10_PI_TYPE3_PROTECTION) Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: sd: Fix indentationBart Van Assche
This patch avoids that smatch reports the following: drivers/scsi/sd.c:3540: sd_suspend_common() warn: inconsistent indenting Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: sd: sr: Convert two assignments into warning statementsBart Van Assche
Before scsi_prep_fn() calls the ULP .init_command() callback function it stores the SCSI command pointer in request.special. This means that the SCpnt = rq->special assignments in the sd and sr drivers assign a pointer to itself. Hence convert these two assignment statements into warning statements. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: Use blk_mq_rq_to_pdu() to convert a request to a SCSI command pointerBart Van Assche
Since commit e9c787e65c0c ("scsi: allocate scsi_cmnd structures as part of struct request") struct request and struct scsi_cmnd are adjacent. This means that there is now an alternative to reading req->special to convert a pointer to a prepared request into a SCSI command pointer, namely by using blk_mq_rq_to_pdu(). Make this change where appropriate. Although this patch does not change any functionality, it slightly improves performance and slightly improves readability. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: Document which queue type a function is intended forBart Van Assche
Rename several functions to make it easy to see which queue type a function is intended for. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: Convert a strncmp() call into a strcmp() callBart Van Assche
This patch avoids that smatch reports the following warning: drivers/scsi/scsi_sysfs.c:117: check_set() error: strncmp() '"-"' too small (2 vs 20) Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: Suppress gcc 7 fall-through warnings reported with W=1Bart Van Assche
The conclusion of a recent discussion about the new warnings reported by gcc 7 is that the new warnings reported when building with W=1 should be suppressed. However, gcc 7 still warns about fall-through in switch statements when building with W=1. Suppress these warnings by annotating the SCSI core properly. See also Linus Torvalds, Lots of new warnings with gcc-7.1.1, 11 July 2017 (https://www.mail-archive.com/linux-media@vger.kernel.org/msg115428.html). References: commit bd664f6b3e37 ("disable new gcc-7.1.1 warnings for now") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: Avoid sign extension of scsi_device.typeBart Van Assche
This patch avoids that smatch reports the following: drivers/scsi/scsi_sysfs.c:506 scsi_bus_uevent() warn: argument 3 to %02x specifier has type 'char' drivers/scsi/scsi_sysfs.c:872 sdev_show_modalias() warn: argument 4 to %02x specifier has type 'char' Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2026-01-03 21:38:44 +0000