summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-09-26s390/dasd: fix hanging offline processingStefan Haberland
Internal I/O is processed by the _sleep_on_function which might wait for a device to get operational. During offline processing this will never happen and therefore the refcount of the device will not drop to zero and the offline processing blocks as well. Fix by letting requests fail in the _sleep_on function during offline processing. No further handling of the requests is necessary since this is internal I/O and the device is thrown away afterwards. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-09-26Merge branch 'bnx2x-fix-page-allocation-failure'David S. Miller
Jason Baron says: ==================== bnx2x: page allocation failure While configuring ~500 multicast addrs, we ran into high order page allocation failures. They don't need to be high order, and thus I'm proposing to split them into at most PAGE_SIZE allocations. Below is a sample failure. [1201902.617882] bnx2x: [bnx2x_set_mc_list:12374(eth0)]Failed to create multicast MACs list: -12 [1207325.695021] kworker/1:0: page allocation failure: order:2, mode:0xc020 [1207325.702059] CPU: 1 PID: 15805 Comm: kworker/1:0 Tainted: G W [1207325.712940] Hardware name: SYNNEX CORPORATION 1x8-X4i SSD 10GE/S5512LE, BIOS V8.810 05/16/2013 [1207325.722284] Workqueue: events bnx2x_sp_rtnl_task [bnx2x] [1207325.728206] 0000000000000000 ffff88012d873a78 ffffffff8267f7c7 000000000000c020 [1207325.736754] 0000000000000000 ffff88012d873b08 ffffffff8212f8e0 fffffffc00000003 [1207325.745301] ffff88041ffecd80 ffff880400000030 0000000000000002 0000c0206800da13 [1207325.753846] Call Trace: [1207325.756789] [<ffffffff8267f7c7>] dump_stack+0x4d/0x63 [1207325.762426] [<ffffffff8212f8e0>] warn_alloc_failed+0xe0/0x130 [1207325.768756] [<ffffffff8213c898>] ? wakeup_kswapd+0x48/0x140 [1207325.774914] [<ffffffff82132afc>] __alloc_pages_nodemask+0x2bc/0x970 [1207325.781761] [<ffffffff82173691>] alloc_pages_current+0x91/0x100 [1207325.788260] [<ffffffff8212fa1e>] alloc_kmem_pages+0xe/0x10 [1207325.794329] [<ffffffff8214c9c8>] kmalloc_order+0x18/0x50 [1207325.800227] [<ffffffff8214ca26>] kmalloc_order_trace+0x26/0xb0 [1207325.806642] [<ffffffff82451c68>] ? _xfer_secondary_pool+0xa8/0x1a0 [1207325.813404] [<ffffffff8217cfda>] __kmalloc+0x19a/0x1b0 [1207325.819142] [<ffffffffa02fe975>] bnx2x_set_rx_mode_inner+0x3d5/0x590 [bnx2x] [1207325.827000] [<ffffffffa02ff52d>] bnx2x_sp_rtnl_task+0x28d/0x760 [bnx2x] [1207325.834197] [<ffffffff820695d4>] process_one_work+0x134/0x3c0 [1207325.840522] [<ffffffff82069981>] worker_thread+0x121/0x460 [1207325.846585] [<ffffffff82069860>] ? process_one_work+0x3c0/0x3c0 [1207325.853089] [<ffffffff8206f039>] kthread+0xc9/0xe0 [1207325.858459] [<ffffffff82070000>] ? notify_die+0x10/0x40 [1207325.864263] [<ffffffff8206ef70>] ? kthread_create_on_node+0x180/0x180 [1207325.871288] [<ffffffff826852d2>] ret_from_fork+0x42/0x70 [1207325.877183] [<ffffffff8206ef70>] ? kthread_create_on_node+0x180/0x180 v2: -make use of list_next_entry() -only use PAGE_SIZE allocations ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26bnx2x: allocate mac filtering pending list in PAGE_SIZE incrementsJason Baron
Currently, we can have high order page allocations that specify GFP_ATOMIC when configuring multicast MAC address filters. For example, we have seen order 2 page allocation failures with ~500 multicast addresses configured. Convert the allocation for the pending list to be done in PAGE_SIZE increments. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: Yuval Mintz <Yuval.Mintz@qlogic.com> Cc: Ariel Elior <Ariel.Elior@qlogic.com> Acked-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26bnx2x: allocate mac filtering 'mcast_list' in PAGE_SIZE incrementsJason Baron
Currently, we can have high order page allocations that specify GFP_ATOMIC when configuring multicast MAC address filters. For example, we have seen order 2 page allocation failures with ~500 multicast addresses configured. Convert the allocation for 'mcast_list' to be done in PAGE_SIZE increments. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: Yuval Mintz <Yuval.Mintz@qlogic.com> Cc: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26arm64: Kconfig: select OF/ACPI_NUMA under NUMA configKefeng Wang
Move OF_NUMA select under NUMA config, and select ACPI_NUMA when ACPI enabled. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-26arm64: fix dump_backtrace/unwind_frame with NULL tskMark Rutland
In some places, dump_backtrace() is called with a NULL tsk parameter, e.g. in bug_handler() in arch/arm64, or indirectly via show_stack() in core code. The expectation is that this is treated as if current were passed instead of NULL. Similar is true of unwind_frame(). Commit a80a0eb70c358f8c ("arm64: make irq_stack_ptr more robust") didn't take this into account. In dump_backtrace() it compares tsk against current *before* we check if tsk is NULL, and in unwind_frame() we never set tsk if it is NULL. Due to this, we won't initialise irq_stack_ptr in either function. In dump_backtrace() this results in calling dump_mem() for memory immediately above the IRQ stack range, rather than for the relevant range on the task stack. In unwind_frame we'll reject unwinding frames on the IRQ stack. In either case this results in incomplete or misleading backtrace information, but is not otherwise problematic. The initial percpu areas (including the IRQ stacks) are allocated in the linear map, and dump_mem uses __get_user(), so we shouldn't access anything with side-effects, and will handle holes safely. This patch fixes the issue by having both functions handle the NULL tsk case before doing anything else with tsk. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Fixes: a80a0eb70c358f8c ("arm64: make irq_stack_ptr more robust") Acked-by: James Morse <james.morse@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yang Shi <yang.shi@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-26PM / OPP: Don't support OPP if it provides supported-hw but platform does notDave Gerlach
The OPP framework allows each OPP to set a opp-supported-hw property which provides values that are matched against supported_hw values provided by the platform to limit support for certain OPPs on specific hardware. Currently, if the platform does not set supported_hw values, all OPPs are interpreted as supported, even if they have provided their own opp-supported-hw values. If an OPP has provided opp-supported-hw, it is indicating that there is some specific hardware configuration it is supported by. These constraints should be honored, and if no supported_hw has been provided by the platform, there is no way to determine if that OPP is actually supported, so it should be marked as not supported. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-26cpufreq: st: add missing \n to end of dev_err messageColin Ian King
Trival fix, dev_err message is missing a \n, so add it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-26cpufreq: kirkwood: add missing \n to end of dev_err messagesColin Ian King
Trival fix, dev_err messages are missing a \n, so add it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-26ACPI / bus: Adjust ACPI subsystem initialization for new table loading modeLv Zheng
This patch enables the following initialization order for the new table loading mode (which is enabled by setting acpi_gbl_parse_table_as_term_list to TRUE): 1. Install default region handlers (SystemMemory, SystemIo, PciConfig, EmbeddedControl via ECDT) without evaluating _REG; 2. Load the table and execute the module level AML opcodes instantly. Signed-off-by: Lv Zheng <lv.zheng@intel.com> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-26Merge branch 'acpica' into acpi-busRafael J. Wysocki
2016-09-26Merge tag 'iwlwifi-next-for-kalle-2016-09-19-2' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next * added support for MU-MIMO sniffer * added support for RRM by scan * added support for packet injection * migrate to devm memory allocation handling * some fixes, mostly in DQA and new HW support * other generic cleanups
2016-09-26x86/RAS/mce_amd_inj: Remove debugfs dir recursively on exitBorislav Petkov
Simplify exit_mce_inject() by using debugfs_remove_recursive() and do away with the noodling over the dentry elements. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160926083152.30848-3-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-26x86/RAS/mce_amd_inj: Fix signed wrap around when decrementing index 'i'Colin Ian King
Change predecrement compare to post decrement compare to avoid an unsigned integer wrap-around comparisomn when decrementing in the while loop. For example, if the debugfs_create_file() fails when 'i' is zero, the current situation will predecrement 'i' in the while loop, wrapping 'i' to the maximum signed integer and cause multiple out of bounds reads on dfs_fls[i].d as the loop interates to zero. Also, as Borislav Petkov suggested, return -ENODEV rather than -ENOMEM on the error condition. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yazen Ghannam <Yazen.Ghannam@amd.com> Link: http://lkml.kernel.org/r/20160926083152.30848-2-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-26Merge tag 'v4.8-rc8' into ras/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-26cfg80211: add checks for beacon rate, extend to meshJohannes Berg
The previous commit added support for specifying the beacon rate for AP mode. Add features checks to this, and extend it to also support the rate configuration for mesh networks. For IBSS it's not as simple due to joining etc., so that's not yet supported. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-26cfg80211: Add support to configure a beacon data ratePurushottam Kushwaha
This allows an option to configure a single beacon tx rate for an AP. Signed-off-by: Purushottam Kushwaha <pkushwah@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-26ALSA: hda - Adding one more ALC255 pin definition for headset problemHui Wang
We have two new Dell laptop models, they have the same ALC255 pin definition, but not in the pin quirk table yet, as a result, the headset microphone can't work. After adding the definition in the table, the headset microphone works well. Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-26nfp: bpf: improve handling for disabled BPF syscallArnd Bergmann
I stumbled over a new warning during randconfig testing, with CONFIG_BPF_SYSCALL disabled: drivers/net/ethernet/netronome/nfp/nfp_net_offload.c: In function 'nfp_net_bpf_offload': drivers/net/ethernet/netronome/nfp/nfp_net_offload.c:263:3: error: '*((void *)&res+4)' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/net/ethernet/netronome/nfp/nfp_net_offload.c:263:3: error: 'res.n_instr' may be used uninitialized in this function [-Werror=maybe-uninitialized] As far as I can tell, this is a false positive caused by the compiler getting confused about a function that is partially inlined, but it's easy to avoid while improving the code: The nfp_bpf_jit() stub helper for that configuration is unusual as it is defined in a header file but not marked 'static inline'. By moving the compile-time check into the caller using the IS_ENABLED() macro, we can remove that stub and simplify the nfp_net_bpf_offload_prepare() function enough to unconfuse the compiler. Fixes: 7533fdc0f77f ("nfp: bpf: add hardware bpf offload") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26net: bcmgenet: remove unused function in bcmgenet.cBaoyou Xie
We get 1 warning when building kernel with W=1: drivers/net/ethernet/broadcom/genet/bcmgenet.c:2763:5: warning: no previous prototype for 'bcmgenet_hfb_add_filter' [-Wmissing-prototypes] In fact, this function is implemented in drivers/net/ethernet/broadcom/genet/bcmgenet.c, but be called by no one, thus can be removed. So this patch removes the unused functions. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26cxgb4: mark symbols static where possibleBaoyou Xie
We get 10 warnings when building kernel with W=1: drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:304:5: warning: no previous prototype for 'cxgb4_dcb_enabled' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:194:5: warning: no previous prototype for 'setup_sge_queues_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:241:6: warning: no previous prototype for 'free_sge_queues_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:268:5: warning: no previous prototype for 'cfg_queues_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:344:6: warning: no previous prototype for 'free_queues_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:353:5: warning: no previous prototype for 'request_msix_queue_irqs_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:379:6: warning: no previous prototype for 'free_msix_queue_irqs_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:393:6: warning: no previous prototype for 'name_msix_vecs_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:433:6: warning: no previous prototype for 'enable_rx_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:442:6: warning: no previous prototype for 'quiesce_rx_uld' [-Wmissing-prototypes] In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26net: mvneta: mark symbols static where possibleBaoyou Xie
We get 2 warnings when building kernel with W=1: drivers/net/ethernet/marvell/mvneta.c:639:27: warning: no previous prototype for 'mvneta_get_stats64' [-Wmissing-prototypes] drivers/net/ethernet/marvell/mvneta.c:3529:5: warning: no previous prototype for 'mvneta_ethtool_set_link_ksettings' [-Wmissing-prototypes] In fact, these two functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26net: hip04: mark tx_done() staticBaoyou Xie
We get 1 warning when building kernel with W=1: drivers/net/ethernet/hisilicon/hip04_eth.c:603:22: warning: no previous prototype for 'tx_done' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks this function with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26net: hisilicon: mark symbols static where possibleBaoyou Xie
We get 2 warnings when building kernel with W=1: drivers/net/ethernet/hisilicon/hisi_femac.c:943:5: warning: no previous prototype for 'hisi_femac_drv_suspend' [-Wmissing-prototypes] drivers/net/ethernet/hisilicon/hisi_femac.c:960:5: warning: no previous prototype for 'hisi_femac_drv_resume' [-Wmissing-prototypes] In fact, these two functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-25Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2016-09-25 Here are a few more Bluetooth & 802.15.4 patches for the 4.9 kernel that have popped up during the past week: - New USB ID for QCA_ROME Bluetooth device - NULL pointer dereference fix for Bluetooth mgmt sockets - Fixes for BCSP driver - Fix for updating LE scan response Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-25net: dsa: mv88e6xxx: fix non static symbol warningsWei Yongjun
Fixes the following sparse warnings: drivers/net/dsa/mv88e6xxx/chip.c:219:5: warning: symbol 'mv88e6xxx_port_read' was not declared. Should it be static? drivers/net/dsa/mv88e6xxx/chip.c:227:5: warning: symbol 'mv88e6xxx_port_write' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-25be2net: fix non static symbol warningsWei Yongjun
Fixes the following sparse warnings: drivers/net/ethernet/emulex/benet/be_main.c:47:25: warning: symbol 'be_err_recovery_workq' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:63:25: warning: symbol 'be_wq' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-25net: smc91x: take into account register shiftRobert Jarzmik
This aligns smc91x with its cousin, namely smc911x.c. This also allows the driver to run also in a device-tree based lubbock board build, on which it was tested. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-25ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_routeNikolay Aleksandrov
Since the commit below the ipmr/ip6mr rtnl_unicast() code uses the portid instead of the previous dst_pid which was copied from in_skb's portid. Since the skb is new the portid is 0 at that point so the packets are sent to the kernel and we get scheduling while atomic or a deadlock (depending on where it happens) by trying to acquire rtnl two times. Also since this is RTM_GETROUTE, it can be triggered by a normal user. Here's the sleeping while atomic trace: [ 7858.212557] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ 7858.212748] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/0 [ 7858.212881] 2 locks held by swapper/0/0: [ 7858.213013] #0: (((&mrt->ipmr_expire_timer))){+.-...}, at: [<ffffffff810fbbf5>] call_timer_fn+0x5/0x350 [ 7858.213422] #1: (mfc_unres_lock){+.....}, at: [<ffffffff8161e005>] ipmr_expire_process+0x25/0x130 [ 7858.213807] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-rc7+ #179 [ 7858.213934] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 7858.214108] 0000000000000000 ffff88005b403c50 ffffffff813a7804 0000000000000000 [ 7858.214412] ffffffff81a1338e ffff88005b403c78 ffffffff810a4a72 ffffffff81a1338e [ 7858.214716] 000000000000026c 0000000000000000 ffff88005b403ca8 ffffffff810a4b9f [ 7858.215251] Call Trace: [ 7858.215412] <IRQ> [<ffffffff813a7804>] dump_stack+0x85/0xc1 [ 7858.215662] [<ffffffff810a4a72>] ___might_sleep+0x192/0x250 [ 7858.215868] [<ffffffff810a4b9f>] __might_sleep+0x6f/0x100 [ 7858.216072] [<ffffffff8165bea3>] mutex_lock_nested+0x33/0x4d0 [ 7858.216279] [<ffffffff815a7a5f>] ? netlink_lookup+0x25f/0x460 [ 7858.216487] [<ffffffff8157474b>] rtnetlink_rcv+0x1b/0x40 [ 7858.216687] [<ffffffff815a9a0c>] netlink_unicast+0x19c/0x260 [ 7858.216900] [<ffffffff81573c70>] rtnl_unicast+0x20/0x30 [ 7858.217128] [<ffffffff8161cd39>] ipmr_destroy_unres+0xa9/0xf0 [ 7858.217351] [<ffffffff8161e06f>] ipmr_expire_process+0x8f/0x130 [ 7858.217581] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.217785] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.217990] [<ffffffff810fbc95>] call_timer_fn+0xa5/0x350 [ 7858.218192] [<ffffffff810fbbf5>] ? call_timer_fn+0x5/0x350 [ 7858.218415] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.218656] [<ffffffff810fde10>] run_timer_softirq+0x260/0x640 [ 7858.218865] [<ffffffff8166379b>] ? __do_softirq+0xbb/0x54f [ 7858.219068] [<ffffffff816637c8>] __do_softirq+0xe8/0x54f [ 7858.219269] [<ffffffff8107a948>] irq_exit+0xb8/0xc0 [ 7858.219463] [<ffffffff81663452>] smp_apic_timer_interrupt+0x42/0x50 [ 7858.219678] [<ffffffff816625bc>] apic_timer_interrupt+0x8c/0xa0 [ 7858.219897] <EOI> [<ffffffff81055f16>] ? native_safe_halt+0x6/0x10 [ 7858.220165] [<ffffffff810d64dd>] ? trace_hardirqs_on+0xd/0x10 [ 7858.220373] [<ffffffff810298e3>] default_idle+0x23/0x190 [ 7858.220574] [<ffffffff8102a20f>] arch_cpu_idle+0xf/0x20 [ 7858.220790] [<ffffffff810c9f8c>] default_idle_call+0x4c/0x60 [ 7858.221016] [<ffffffff810ca33b>] cpu_startup_entry+0x39b/0x4d0 [ 7858.221257] [<ffffffff8164f995>] rest_init+0x135/0x140 [ 7858.221469] [<ffffffff81f83014>] start_kernel+0x50e/0x51b [ 7858.221670] [<ffffffff81f82120>] ? early_idt_handler_array+0x120/0x120 [ 7858.221894] [<ffffffff81f8243f>] x86_64_start_reservations+0x2a/0x2c [ 7858.222113] [<ffffffff81f8257c>] x86_64_start_kernel+0x13b/0x14a Fixes: 2942e9005056 ("[RTNETLINK]: Use rtnl_unicast() for rtnetlink unicasts") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-25cxgb4: fix -ve error check on a signed iqColin Ian King
iq is unsigned, so the error check for iq < 0 has no effect so errors can slip past this check. Fix this by making iq signed and also get_filter_steerq return a signed int so a -ve error can be returned. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-25Linux 4.8-rc8Linus Torvalds
2016-09-25Merge tag 'trace-v4.8-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracefs fixes from Steven Rostedt: "Al Viro has been looking at the tracefs code, and has pointed out some issues. This contains one fix by me and one by Al. I'm sure that he'll come up with more but for now I tested these patches and they don't appear to have any negative impact on tracing" * tag 'trace-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: fix memory leaks in tracing_buffers_splice_read() tracing: Move mutex to protect against resetting of seq data
2016-09-25fault_in_multipages_readable() throws set-but-unused errorDave Chinner
When building XFS with -Werror, it now fails with: include/linux/pagemap.h: In function 'fault_in_multipages_readable': include/linux/pagemap.h:602:16: error: variable 'c' set but not used [-Werror=unused-but-set-variable] volatile char c; ^ This is a regression caused by commit e23d4159b109 ("fix fault_in_multipages_...() on architectures with no-op access_ok()"). Fix it by re-adding the "(void)c" trick taht was previously used to make the compiler think the variable is used. Signed-off-by: Dave Chinner <dchinner@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree, they are: 1) Consolidate GRE protocol tracker using new GRE protocol definitions, patches from Gao Feng. 2) Properly parse continuation lines in SIP helper, update allowed characters in Call-ID header and allow tabs in SIP headers as specified by RFC3261, from Marco Angaroni. 3) Remove useless code in FTP conntrack helper, also from Gao Feng. 4) Add number generation expression for nf_tables, with random and incremental generators. This also includes specific offset to add to the result, patches from Laura Garcia Liebana. Liping Zhang follows with a fix to avoid a race in this new expression. 5) Fix new quota expression inversion logic, added in the previous pull request. 6) Missing validation of queue configuration in nft_queue, patch from Liping Zhang. 7) Remove unused ctl_table_path, as part of the deprecation of the ip_conntrack sysctl interface coming in the previous batch. Again from Liping Zhang. 8) Add offset attribute to nft_hash expression, so we can generate any output from a specific base offset. Moreover, check for possible overflow, patches from Laura Garcia. 9) Allow to invert dynamic set insertion from packet path, to check for overflows in case the set is full. 10) Revisit nft_set_pktinfo*() logic from nf_tables to ensure proper initialization of layer 4 protocol. Consolidate pktinfo structure initialization for bridge and netdev families. 11) Do not inconditionally drop IPv6 packets that we cannot parse transport protocol for ip6 and inet families, let the user decide on this via ruleset policy. 12) Get rid of gotos in __nf_ct_try_assign_helper(). 13) Check for return value in register_netdevice_notifier() and nft_register_chain_type(), patches from Gao Feng. 14) Get rid of CONFIG_IP6_NF_IPTABLES dependency in nf_queue infrastructure that is common to nf_tables, from Liping Zhang. 15) Disable 'found' and 'searched' stats that are updates from the packet hotpath, not very useful these days. 16) Validate maximum value of u32 netlink attributes in nf_tables, this introduces nft_parse_u32_check(). From Laura Garcia. 17) Add missing code to integrate nft_queue with maps, patch from Liping Zhang. This also includes missing support ranges in nft_queue bridge family. 18) Fix check in nft_payload_fast_eval() that ensure that we don't go over the skbuff data boundary, from Liping Zhang. 19) Check if transport protocol is set from nf_tables tracing and payload expression. Again from Liping Zhang. 20) Use net_get_random_once() whenever possible, from Gao Feng. 21) Replace hardcoded value by sizeof() in xt_helper, from Gao Feng. 22) Remove superfluous check for found element in nft_lookup. 23) Simplify TCPMSS logic to check for minimum MTU, from Gao Feng. 24) Replace double linked list by single linked list in Netfilter core hook infrastructure, patchset from Aaron Conole. This includes several patches to prepare this update. 25) Fix wrong sequence adjustment of TCP RST with no ACK, from Gao Feng. 26) Relax check for direction attribute in nft_ct for layer 3 and 4 protocol fields, from Liping Zhang. 27) Add new revision for hashlimit to support higher pps of upto 1 million, from Vishwanath Pai. 28) Evict stale entries in nf_conntrack when reading entries from /proc/net/nf_conntrack, from Florian Westphal. 29) Fix transparent match for IPv6 request sockets, from Krisztian Kovacs. 30) Add new range expression for nf_tables. 31) Add missing code to support for flags in nft_log. Expose NF_LOG_* flags via uapi and use it from the generic logging infrastructure, instead of using xt specific definitions, from Liping Zhang. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-25mm: check VMA flags to avoid invalid PROT_NONE NUMA balancingLorenzo Stoakes
The NUMA balancing logic uses an arch-specific PROT_NONE page table flag defined by pte_protnone() or pmd_protnone() to mark PTEs or huge page PMDs respectively as requiring balancing upon a subsequent page fault. User-defined PROT_NONE memory regions which also have this flag set will not normally invoke the NUMA balancing code as do_page_fault() will send a segfault to the process before handle_mm_fault() is even called. However if access_remote_vm() is invoked to access a PROT_NONE region of memory, handle_mm_fault() is called via faultin_page() and __get_user_pages() without any access checks being performed, meaning the NUMA balancing logic is incorrectly invoked on a non-NUMA memory region. A simple means of triggering this problem is to access PROT_NONE mmap'd memory using /proc/self/mem which reliably results in the NUMA handling functions being invoked when CONFIG_NUMA_BALANCING is set. This issue was reported in bugzilla (issue 99101) which includes some simple repro code. There are BUG_ON() checks in do_numa_page() and do_huge_pmd_numa_page() added at commit c0e7cad to avoid accidentally provoking strange behaviour by attempting to apply NUMA balancing to pages that are in fact PROT_NONE. The BUG_ON()'s are consistently triggered by the repro. This patch moves the PROT_NONE check into mm/memory.c rather than invoking BUG_ON() as faulting in these pages via faultin_page() is a valid reason for reaching the NUMA check with the PROT_NONE page table flag set and is therefore not always a bug. Link: https://bugzilla.kernel.org/show_bug.cgi?id=99101 Reported-by: Trevor Saunders <tbsaunde@tbsaunde.org> Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-25Merge branch 'master' of ↵Pablo Neira Ayuso
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next Conflicts: net/netfilter/core.c net/netfilter/nf_tables_netdev.c Resolve two conflicts before pull request for David's net-next tree: 1) Between c73c24849011 ("netfilter: nf_tables_netdev: remove redundant ip_hdr assignment") from the net tree and commit ddc8b6027ad0 ("netfilter: introduce nft_set_pktinfo_{ipv4, ipv6}_validate()"). 2) Between e8bffe0cf964 ("net: Add _nf_(un)register_hooks symbols") and Aaron Conole's patches to replace list_head with single linked list. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-09-25netfilter: nf_log: get rid of XT_LOG_* macrosLiping Zhang
nf_log is used by both nftables and iptables, so use XT_LOG_XXX macros here is not appropriate. Replace them with NF_LOG_XXX. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-09-25netfilter: nft_log: complete NFTA_LOG_FLAGS attr supportLiping Zhang
NFTA_LOG_FLAGS attribute is already supported, but the related NF_LOG_XXX flags are not exposed to the userspace. So we cannot explicitly enable log flags to log uid, tcp sequence, ip options and so on, i.e. such rule "nft add rule filter output log uid" is not supported yet. So move NF_LOG_XXX macro definitions to the uapi/../nf_log.h. In order to keep consistent with other modules, change NF_LOG_MASK to refer to all supported log flags. On the other hand, add a new NF_LOG_DEFAULT_MASK to refer to the original default log flags. Finally, if user specify the unsupported log flags or NFTA_LOG_GROUP and NFTA_LOG_FLAGS are set at the same time, report EINVAL to the userspace. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-09-25netfilter: nf_tables: add range expressionPablo Neira Ayuso
Inverse ranges != [a,b] are not currently possible because rules are composites of && operations, and we need to express this: data < a || data > b This patch adds a new range expression. Positive ranges can be already through two cmp expressions: cmp(sreg, data, >=) cmp(sreg, data, <=) This new range expression provides an alternative way to express this. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-09-25netfilter: xt_socket: fix transparent match for IPv6 request socketsKOVACS Krisztian
The introduction of TCP_NEW_SYN_RECV state, and the addition of request sockets to the ehash table seems to have broken the --transparent option of the socket match for IPv6 (around commit a9407000). Now that the socket lookup finds the TCP_NEW_SYN_RECV socket instead of the listener, the --transparent option tries to match on the no_srccheck flag of the request socket. Unfortunately, that flag was only set for IPv4 sockets in tcp_v4_init_req() by copying the transparent flag of the listener socket. This effectively causes '-m socket --transparent' not match on the ACK packet sent by the client in a TCP handshake. Based on the suggestion from Eric Dumazet, this change moves the code initializing no_srccheck to tcp_conn_request(), rendering the above scenario working again. Fixes: a940700003 ("netfilter: xt_socket: prepare for TCP_NEW_SYN_RECV support") Signed-off-by: Alex Badics <alex.badics@balabit.com> Signed-off-by: KOVACS Krisztian <hidden@balabit.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-09-25Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "A round of 4.8 fixes: MIPS generic code: - Add a missing ".set pop" in an early commit - Fix memory regions reaching top of physical - MAAR: Fix address alignment - vDSO: Fix Malta EVA mapping to vDSO page structs - uprobes: fix incorrect uprobe brk handling - uprobes: select HAVE_REGS_AND_STACK_ACCESS_API - Avoid a BUG warning during PR_SET_FP_MODE prctl - SMP: Fix possibility of deadlock when bringing CPUs online - R6: Remove compact branch policy Kconfig entries - Fix size calc when avoiding IPIs for small icache flushes - Fix pre-r6 emulation FPU initialisation - Fix delay slot emulation count in debugfs ATH79: - Fix test for error return of clk_register_fixed_factor. Octeon: - Fix kernel header to work for VDSO build. - Fix initialization of platform device probing. paravirt: - Fix undefined reference to smp_bootstrap" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix delay slot emulation count in debugfs MIPS: SMP: Fix possibility of deadlock when bringing CPUs online MIPS: Fix pre-r6 emulation FPU initialisation MIPS: vDSO: Fix Malta EVA mapping to vDSO page structs MIPS: Select HAVE_REGS_AND_STACK_ACCESS_API MIPS: Octeon: Fix platform bus probing MIPS: Octeon: mangle-port: fix build failure with VDSO code MIPS: Avoid a BUG warning during prctl(PR_SET_FP_MODE, ...) MIPS: c-r4k: Fix size calc when avoiding IPIs for small icache flushes MIPS: Add a missing ".set pop" in an early commit MIPS: paravirt: Fix undefined reference to smp_bootstrap MIPS: Remove compact branch policy Kconfig entries MIPS: MAAR: Fix address alignment MIPS: Fix memory regions reaching top of physical MIPS: uprobes: fix incorrect uprobe brk handling MIPS: ath79: Fix test for error return of clk_register_fixed_factor().
2016-09-25Merge tag 'powerpc-4.8-7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull one more powerpc fix from Michael Ellerman: "powernv/pci: Fix m64 checks for SR-IOV and window alignment from Russell Currey" * tag 'powerpc-4.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv/pci: Fix m64 checks for SR-IOV and window alignment
2016-09-25genirq: Make function __irq_do_set_handler() staticWei Yongjun
Fixes the following sparse warning: kernel/irq/chip.c:786:1: warning: symbol '__irq_do_set_handler' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: http://lkml.kernel.org/r/1474817799-18676-1-git-send-email-weiyj.lk@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-25radix tree: fix sibling entry handling in radix_tree_descend()Linus Torvalds
The fixes to the radix tree test suite show that the multi-order case is broken. The basic reason is that the radix tree code uses tagged pointers with the "internal" bit in the low bits, and calculating the pointer indices was supposed to mask off those bits. But gcc will notice that we then use the index to re-create the pointer, and will avoid doing the arithmetic and use the tagged pointer directly. This cleans the code up, using the existing is_sibling_entry() helper to validate the sibling pointer range (instead of open-coding it), and using entry_to_node() to mask off the low tag bit from the pointer. And once you do that, you might as well just use the now cleaned-up pointer directly. [ Side note: the multi-order code isn't actually ever used in the kernel right now, and the only reason I didn't just delete all that code is that Kirill Shutemov piped up and said: "Well, my ext4-with-huge-pages patchset[1] uses multi-order entries. It also converts shmem-with-huge-pages and hugetlb to them. I'm okay with converting it to other mechanism, but I need something. (I looked into Konstantin's RFC patchset[2]. It looks okay, but I don't feel myself qualified to review it as I don't know much about radix-tree internals.)" [1] http://lkml.kernel.org/r/20160915115523.29737-1-kirill.shutemov@linux.intel.com [2] http://lkml.kernel.org/r/147230727479.9957.1087787722571077339.stgit@zurg ] Reported-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Cedric Blancher <cedric.blancher@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-25ALSA: usb-line6: use the same declaration as definition in header for MIDI ↵Takashi Sakamoto
manufacturer ID Currently, usb-line6 module exports an array of MIDI manufacturer ID and usb-pod module uses it. However, the declaration is not the definition in common header. The difference is explicit length of array. Although compiler calculates it and everything goes well, it's better to use the same representation between definition and declaration. This commit fills the length of array for usb-line6 module. As a small good sub-effect, this commit suppress below warnings from static analysis by sparse v0.5.0. sound/usb/line6/driver.c:274:43: error: cannot size expression sound/usb/line6/driver.c:275:16: error: cannot size expression sound/usb/line6/driver.c:276:16: error: cannot size expression sound/usb/line6/driver.c:277:16: error: cannot size expression Fixes: 705ececd1c60 ("Staging: add line6 usb driver") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-25ALSA: control: cage TLV_DB_RANGE_HEAD in kernel land because it was obsoletedTakashi Sakamoto
In commit bf1d1c9b6179 ("ALSA: tlv: add DECLARE_TLV_DB_RANGE()"), the new macro was added so that "dB range information can be specified without having to count the items manually for TLV_DB_RANGE_HEAD()". In short, TLV_DB_RANGE_HEAD macro was obsoleted. In commit 46e860f76804 ("ALSA: rename TLV-related macros so that they're friendly to user applications"), TLV-related macros are exposed for applications in user land to get content of data structured by Type/Length/Value shape. The commit managed to expose TLV-related macros as many as possible, while obsoleted TLV_DB_RANGE_HEAD() was included to the list of exposed macros. This situation brings some confusions to application developers because they might think all exposed macros have their own purpose and useful for applications. For the reason, this commit moves TLV_DB_RANGE_HEAD macro from UAPI header to a header for kernel land, again. The above commit is done within the same development period for kernel 4.9, thus not published yet. This commit might certainly brings no confusions to user land. Reference: commit bf1d1c9b6179 ("ALSA: tlv: add DECLARE_TLV_DB_RANGE()") Reference: commit 46e860f76804 ("ALSA: rename TLV-related macros so that they're friendly to user applications") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-25radix tree test suite: Test radix_tree_replace_slot() for multiorder entriesMatthew Wilcox
When we replace a multiorder entry, check that all indices reflect the new value. Also, compile the test suite with -O2, which shows other problems with the code due to some dodgy pointer operations in the radix tree code. Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-25staging: wlan-ng: fix block comments style errorsSergio Paracuellos
This patch fixes the following checkpatch.pl warning in p80211types.h: WARNING: Block comments should align the * on each line Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-25staging: wlan-ng: avoid new typedef: p80211item_unk4096_tSergio Paracuellos
This patch fixes the following checkpatch.pl warning in p80211types.h: WARNING: do not add new typedefs It applies for typedef p80211item_unk4096_t Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-25staging: wlan-ng: avoid new typedef: p80211item_unk1024_tSergio Paracuellos
This patch fixes the following checkpatch.pl warning in p80211types.h: WARNING: do not add new typedefs It applies for typedef p80211item_unk1024_t Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-17 10:57:26 +0000