summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-10-12nfp: flow_offload: move flow_indr_dev_register from app init to app startBaowen Zheng
In commit 74fc4f828769 ("net: Fix offloading indirect devices dependency on qdisc order creation"), it adds a process to trigger the callback to setup the bo callback when the driver regists a callback. In our current implement, we are not ready to run the callback when nfp call the function flow_indr_dev_register, then there will be error message as: kernel: Oops: 0000 [#1] SMP PTI kernel: CPU: 0 PID: 14119 Comm: kworker/0:0 Tainted: G kernel: Workqueue: events work_for_cpu_fn kernel: RIP: 0010:nfp_flower_indr_setup_tc_cb+0x258/0x410 kernel: RSP: 0018:ffffbc1e02c57bf8 EFLAGS: 00010286 kernel: RAX: 0000000000000000 RBX: ffff9c761fabc000 RCX: 0000000000000001 kernel: RDX: 0000000000000001 RSI: fffffffffffffff0 RDI: ffffffffc0be9ef1 kernel: RBP: ffffbc1e02c57c58 R08: ffffffffc08f33aa R09: ffff9c6db7478800 kernel: R10: 0000009c003f6e00 R11: ffffbc1e02800000 R12: ffffbc1e000d9000 kernel: R13: ffffbc1e000db428 R14: ffff9c6db7478800 R15: ffff9c761e884e80 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: fffffffffffffff0 CR3: 00000009e260a004 CR4: 00000000007706f0 kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 kernel: PKRU: 55555554 kernel: Call Trace: kernel: ? flow_indr_dev_register+0xab/0x210 kernel: ? __cond_resched+0x15/0x30 kernel: ? kmem_cache_alloc_trace+0x44/0x4b0 kernel: ? nfp_flower_setup_tc+0x1d0/0x1d0 [nfp] kernel: flow_indr_dev_register+0x158/0x210 kernel: ? tcf_block_unbind+0xe0/0xe0 kernel: nfp_flower_init+0x40b/0x650 [nfp] kernel: nfp_net_pci_probe+0x25f/0x960 [nfp] kernel: ? nfp_rtsym_read_le+0x76/0x130 [nfp] kernel: nfp_pci_probe+0x6a9/0x820 [nfp] kernel: local_pci_probe+0x45/0x80 So we need to call flow_indr_dev_register in app start process instead of init stage. Fixes: 74fc4f828769 ("net: Fix offloading indirect devices dependency on qdisc order creation") Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Link: https://lore.kernel.org/r/20211012124850.13025-1-louis.peens@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13drm: rcar-du: Don't create encoder for unconnected LVDS outputsLaurent Pinchart
On R-Car D3 and E3, the LVDS encoders provide the pixel clock to the DU, even when LVDS outputs are not used. For this reason, the rcar-lvds driver probes successfully on those platforms even if no further bridge or panel is connected to the LVDS output, in order to provide the rcar_lvds_clk_enable() and rcar_lvds_clk_disable() functions to the DU driver. If an LVDS output isn't connected, trying to create a DRM connector for the output will fail. Fix this by skipping connector creation in that case, and also skip creation of the DRM encoder as there's no point in an encoder without a connector. Fixes: e9e056949c92 ("drm: rcar-du: lvds: Convert to DRM panel bridge helper") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> (cherry picked from commit 187502afe87a0fc96832056558978fa423920ee0) Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-12net/mlx5e: Fix division by 0 in mlx5e_select_queue for representorsMaxim Mikityanskiy
Commit 846d6da1fcdb ("net/mlx5e: Fix division by 0 in mlx5e_select_queue") makes mlx5e_build_nic_params assign a non-zero initial value to priv->num_tc_x_num_ch, so that mlx5e_select_queue doesn't fail with division by 0 if called before the first activation of channels. However, the initialization flow of representors doesn't call mlx5e_build_nic_params, so this bug can still happen with representors. This commit fixes the bug by adding the missing assignment to mlx5e_build_rep_params. Fixes: 846d6da1fcdb ("net/mlx5e: Fix division by 0 in mlx5e_select_queue") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-12net/mlx5e: Mutually exclude RX-FCS and RX-port-timestampAya Levin
Due to current HW arch limitations, RX-FCS (scattering FCS frame field to software) and RX-port-timestamp (improved timestamp accuracy on the receive side) can't work together. RX-port-timestamp is not controlled by the user and it is enabled by default when supported by the HW/FW. This patch sets RX-port-timestamp opposite to RX-FCS configuration. Fixes: 102722fc6832 ("net/mlx5e: Add support for RXFCS feature flag") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-12net/mlx5e: Switchdev representors are not vlan challengedSaeed Mahameed
Before this patch, mlx5 representors advertised the NETIF_F_VLAN_CHALLENGED bit, this could lead to missing features when using reps with vxlan/bridge and maybe other virtual interfaces, when such interfaces inherit this bit and block vlan usage in their topology. Example: $ip link add dev bridge type bridge # add representor interface to the bridge $ip link set dev pf0hpf master $ip link add link bridge name vlan10 type vlan id 10 protocol 802.1q Error: 8021q: VLANs not supported on device. Reps are perfectly capable of handling vlan traffic, although they don't implement vlan_{add,kill}_vid ndos, hence, remove NETIF_F_VLAN_CHALLENGED advertisement. Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors") Reported-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com>
2021-10-12net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error pathValentine Fatiev
Prior to this patch in case mlx5_core_destroy_cq() failed it returns without completing all destroy operations and that leads to memory leak. Instead, complete the destroy flow before return error. Also move mlx5_debug_cq_remove() to the beginning of mlx5_core_destroy_cq() to be symmetrical with mlx5_core_create_cq(). kmemleak complains on: unreferenced object 0xc000000038625100 (size 64): comm "ethtool", pid 28301, jiffies 4298062946 (age 785.380s) hex dump (first 32 bytes): 60 01 48 94 00 00 00 c0 b8 05 34 c3 00 00 00 c0 `.H.......4..... 02 00 00 00 00 00 00 00 00 db 7d c1 00 00 00 c0 ..........}..... backtrace: [<000000009e8643cb>] add_res_tree+0xd0/0x270 [mlx5_core] [<00000000e7cb8e6c>] mlx5_debug_cq_add+0x5c/0xc0 [mlx5_core] [<000000002a12918f>] mlx5_core_create_cq+0x1d0/0x2d0 [mlx5_core] [<00000000cef0a696>] mlx5e_create_cq+0x210/0x3f0 [mlx5_core] [<000000009c642c26>] mlx5e_open_cq+0xb4/0x130 [mlx5_core] [<0000000058dfa578>] mlx5e_ptp_open+0x7f4/0xe10 [mlx5_core] [<0000000081839561>] mlx5e_open_channels+0x9cc/0x13e0 [mlx5_core] [<0000000009cf05d4>] mlx5e_switch_priv_channels+0xa4/0x230 [mlx5_core] [<0000000042bbedd8>] mlx5e_safe_switch_params+0x14c/0x300 [mlx5_core] [<0000000004bc9db8>] set_pflag_tx_port_ts+0x9c/0x160 [mlx5_core] [<00000000a0553443>] mlx5e_set_priv_flags+0xd0/0x1b0 [mlx5_core] [<00000000a8f3d84b>] ethnl_set_privflags+0x234/0x2d0 [<00000000fd27f27c>] genl_family_rcv_msg_doit+0x108/0x1d0 [<00000000f495e2bb>] genl_family_rcv_msg+0xe4/0x1f0 [<00000000646c5c2c>] genl_rcv_msg+0x78/0x120 [<00000000d53e384e>] netlink_rcv_skb+0x74/0x1a0 Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Valentine Fatiev <valentinef@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-12net/mlx5e: Allow only complete TXQs partition in MQPRIO channel modeTariq Toukan
Do not allow configurations of MQPRIO channel mode that do not fully define and utilize the channels txqs. Fixes: ec60c4581bd9 ("net/mlx5e: Support MQPRIO channel mode") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-12net/mlx5: Fix cleanup of bridge delayed workShay Drory
Currently, bridge cleanup is calling to cancel_delayed_work(). When this function is finished, there is a chance that the delayed work is still running. Also, the delayed work is queueing itself. As a result, we might execute the delayed work after the bridge cleanup have finished and hit a null-ptr oops[1]. Fix it by using cancel_delayed_work_sync(), which is waiting until the work is done and will cancel the queue work. [1] [ 8202.143043 ] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 8202.144438 ] #PF: supervisor write access in kernel mode [ 8202.145476 ] #PF: error_code(0x0002) - not-present page [ 8202.146520 ] PGD 0 P4D 0 [ 8202.147126 ] Oops: 0002 [#1] SMP NOPTI [ 8202.147899 ] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.14.0-rc6_for_upstream_min_debug_2021_08_25_16_06 #1 [ 8202.149741 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 8202.151908 ] RIP: 0010:_raw_spin_lock+0xc/0x20 [ 8202.156234 ] RSP: 0018:ffff88846f885ea0 EFLAGS: 00010046 [ 8202.157289 ] RAX: 0000000000000000 RBX: ffff88846f880000 RCX: 0000000000000000 [ 8202.158731 ] RDX: 0000000000000001 RSI: ffff8881004000c8 RDI: 0000000000000000 [ 8202.160177 ] RBP: ffff8881fe684978 R08: ffff888100140000 R09: ffffffff824455b8 [ 8202.161569 ] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [ 8202.163004 ] R13: 0000000000000012 R14: 0000000000000200 R15: ffff88812992d000 [ 8202.164018 ] FS: 0000000000000000(0000) GS:ffff88846f880000(0000) knlGS:0000000000000000 [ 8202.164960 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8202.165634 ] CR2: 0000000000000000 CR3: 0000000108cac004 CR4: 0000000000370ea0 [ 8202.166450 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8202.167807 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8202.168852 ] Call Trace: [ 8202.169421 ] <IRQ> [ 8202.169792 ] __queue_work+0xf2/0x3d0 [ 8202.170481 ] ? queue_work_node+0x40/0x40 [ 8202.171270 ] call_timer_fn+0x2b/0x100 [ 8202.171932 ] __run_timers.part.0+0x152/0x220 [ 8202.172717 ] ? __hrtimer_run_queues+0x171/0x290 [ 8202.173526 ] ? kvm_clock_get_cycles+0xd/0x10 [ 8202.174232 ] ? ktime_get+0x35/0x90 [ 8202.174943 ] run_timer_softirq+0x26/0x50 [ 8202.175745 ] __do_softirq+0xc7/0x271 [ 8202.176373 ] irq_exit_rcu+0x93/0xb0 [ 8202.176983 ] sysvec_apic_timer_interrupt+0x72/0x90 [ 8202.177755 ] </IRQ> [ 8202.178245 ] asm_sysvec_apic_timer_interrupt+0x12/0x20 Fixes: c636a0f0f3f0 ("net/mlx5: Bridge, dynamic entry ageing") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-12ALSA: usb-audio: Add quirk for VF0770Jonas Hahnfeld
The device advertises 8 formats, but only a rate of 48kHz is honored by the hardware and 24 bits give chopped audio, so only report the one working combination. This fixes out-of-the-box audio experience with PipeWire which otherwise attempts to choose S24_3LE (while PulseAudio defaulted to S16_LE). Signed-off-by: Jonas Hahnfeld <hahnjo@hahnjo.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211012200906.3492-1-hahnjo@hahnjo.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-12Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Fix CMA gigantic page order for 16K/64K page sizes - Fix section mismatch error in drivers/acpi/arm64/gtdt.c * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: acpi/arm64: fix next_platform_timer() section mismatch error arm64/hugetlb: fix CMA gigantic page order for non-4K PAGE_SIZE
2021-10-12Merge tag 'platform-drivers-x86-v5.15-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "A second (small) set of pdx86 bug-fixes and new hardware ids for 5.15" * tag 'platform-drivers-x86-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: int1092: Fix non sequential device mode handling platform/x86: intel_skl_int3472: Correct null check platform/x86: gigabyte-wmi: add support for B550 AORUS ELITE AX V2 platform/x86: amd-pmc: Add alternative acpi id for PMC controller platform/x86: intel_scu_ipc: Update timeout value in comment platform/x86: intel_scu_ipc: Increase virtual timeout to 10s platform/x86: intel_scu_ipc: Fix busy loop expiry time platform/x86: dell: Make DELL_WMI_PRIVACY depend on DELL_WMI platform/mellanox: mlxreg-io: Fix read access of n-bytes size attributes platform/mellanox: mlxreg-io: Fix argument base in kstrtou32() call
2021-10-12dm: fix mempool NULL pointer race when completing IOJiazi Li
dm_io_dec_pending() calls end_io_acct() first and will then dec md in-flight pending count. But if a task is swapping DM table at same time this can result in a crash due to mempool->elements being NULL: task1 task2 do_resume ->do_suspend ->dm_wait_for_completion bio_endio ->clone_endio ->dm_io_dec_pending ->end_io_acct ->wakeup task1 ->dm_swap_table ->__bind ->__bind_mempools ->bioset_exit ->mempool_exit ->free_io [ 67.330330] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ...... [ 67.330494] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 67.330510] pc : mempool_free+0x70/0xa0 [ 67.330515] lr : mempool_free+0x4c/0xa0 [ 67.330520] sp : ffffff8008013b20 [ 67.330524] x29: ffffff8008013b20 x28: 0000000000000004 [ 67.330530] x27: ffffffa8c2ff40a0 x26: 00000000ffff1cc8 [ 67.330535] x25: 0000000000000000 x24: ffffffdada34c800 [ 67.330541] x23: 0000000000000000 x22: ffffffdada34c800 [ 67.330547] x21: 00000000ffff1cc8 x20: ffffffd9a1304d80 [ 67.330552] x19: ffffffdada34c970 x18: 000000b312625d9c [ 67.330558] x17: 00000000002dcfbf x16: 00000000000006dd [ 67.330563] x15: 000000000093b41e x14: 0000000000000010 [ 67.330569] x13: 0000000000007f7a x12: 0000000034155555 [ 67.330574] x11: 0000000000000001 x10: 0000000000000001 [ 67.330579] x9 : 0000000000000000 x8 : 0000000000000000 [ 67.330585] x7 : 0000000000000000 x6 : ffffff80148b5c1a [ 67.330590] x5 : ffffff8008013ae0 x4 : 0000000000000001 [ 67.330596] x3 : ffffff80080139c8 x2 : ffffff801083bab8 [ 67.330601] x1 : 0000000000000000 x0 : ffffffdada34c970 [ 67.330609] Call trace: [ 67.330616] mempool_free+0x70/0xa0 [ 67.330627] bio_put+0xf8/0x110 [ 67.330638] dec_pending+0x13c/0x230 [ 67.330644] clone_endio+0x90/0x180 [ 67.330649] bio_endio+0x198/0x1b8 [ 67.330655] dec_pending+0x190/0x230 [ 67.330660] clone_endio+0x90/0x180 [ 67.330665] bio_endio+0x198/0x1b8 [ 67.330673] blk_update_request+0x214/0x428 [ 67.330683] scsi_end_request+0x2c/0x300 [ 67.330688] scsi_io_completion+0xa0/0x710 [ 67.330695] scsi_finish_command+0xd8/0x110 [ 67.330700] scsi_softirq_done+0x114/0x148 [ 67.330708] blk_done_softirq+0x74/0xd0 [ 67.330716] __do_softirq+0x18c/0x374 [ 67.330724] irq_exit+0xb4/0xb8 [ 67.330732] __handle_domain_irq+0x84/0xc0 [ 67.330737] gic_handle_irq+0x148/0x1b0 [ 67.330744] el1_irq+0xe8/0x190 [ 67.330753] lpm_cpuidle_enter+0x4f8/0x538 [ 67.330759] cpuidle_enter_state+0x1fc/0x398 [ 67.330764] cpuidle_enter+0x18/0x20 [ 67.330772] do_idle+0x1b4/0x290 [ 67.330778] cpu_startup_entry+0x20/0x28 [ 67.330786] secondary_start_kernel+0x160/0x170 Fix this by: 1) Establishing pointers to 'struct dm_io' members in dm_io_dec_pending() so that they may be passed into end_io_acct() _after_ free_io() is called. 2) Moving end_io_acct() after free_io(). Cc: stable@vger.kernel.org Signed-off-by: Jiazi Li <lijiazi@xiaomi.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-10-12dm rq: don't queue request to blk-mq during DM suspendMing Lei
DM uses blk-mq's quiesce/unquiesce to stop/start device mapper queue. But blk-mq's unquiesce may come from outside events, such as elevator switch, updating nr_requests or others, and request may come during suspend, so simply ask for blk-mq to requeue it. Fixes one kernel panic issue when running updating nr_requests and dm-mpath suspend/resume stress test. Cc: stable@vger.kernel.org Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-10-12dm clone: make array 'descs' staticColin Ian King
Don't populate the read-only array descs on the stack but instead it static and add extra const. Also makes the object code smaller by 66 bytes: Before: text data bss dec hex filename 42382 11140 512 54034 d312 ./drivers/md/dm-clone-target.o After: text data bss dec hex filename 42220 11236 512 53968 d2d0 ./drivers/md/dm-clone-target.o (gcc version 11.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-10-12dm verity: skip redundant verity_handle_err() on I/O errorsAkilesh Kailash
Without FEC, dm-verity won't call verity_handle_err() when I/O fails, but with FEC enabled, it currently does even if an I/O error has occurred. If there is an I/O error and FEC correction fails, return the error instead of calling verity_handle_err() again. Suggested-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Akilesh Kailash <akailash@google.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-10-12scsi: iscsi: Fix set_param() handlingMike Christie
In commit 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and sync thread") we meant to add a check where before we call ->set_param() we make sure the iscsi_cls_connection is bound. The problem is that between versions 4 and 5 of the patch the deletion of the unchecked set_param() call was dropped so we ended up with 2 calls. As a result we can still hit a crash where we access the unbound connection on the first call. This patch removes that first call. Fixes: 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and sync thread") Link: https://lore.kernel.org/r/20211010161904.60471-1-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Li Feng <fengli@smartx.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-12acpi/arm64: fix next_platform_timer() section mismatch errorJackie Liu
Fix modpost Section mismatch error in next_platform_timer(). [...] WARNING: modpost: vmlinux.o(.text.unlikely+0x26e60): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc The function next_platform_timer() references the variable __initdata acpi_gtdt_desc. This is often because next_platform_timer lacks a __initdata annotation or the annotation of acpi_gtdt_desc is wrong. WARNING: modpost: vmlinux.o(.text.unlikely+0x26e64): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc The function next_platform_timer() references the variable __initdata acpi_gtdt_desc. This is often because next_platform_timer lacks a __initdata annotation or the annotation of acpi_gtdt_desc is wrong. ERROR: modpost: Section mismatches detected. Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them. make[1]: *** [scripts/Makefile.modpost:59: vmlinux.symvers] Error 1 make[1]: *** Deleting file 'vmlinux.symvers' make: *** [Makefile:1176: vmlinux] Error 2 [...] Fixes: a712c3ed9b8a ("acpi/arm64: Add memory-mapped timer support in GTDT driver") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Acked-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/20210823092526.2407526-1-liu.yun@linux.dev Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-10-12block/rnbd-clt-sysfs: fix a couple uninitialized variable bugsDan Carpenter
These variables are printed on the error path if match_int() fails so they have to be initialized. Fixes: 2958a995edc9 ("block/rnbd-clt: Support polling mode for IO latency optimization") Fixes: 1eb54f8f5dd8 ("block/rnbd: client: sysfs interface functions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Gioh Kim <gi-oh.kim@ionos.com> Link: https://lore.kernel.org/r/20211012084443.GA31472@kili Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-12scsi: core: Fix shost->cmd_per_lun calculation in scsi_add_host_with_dma()Dexuan Cui
After commit ea2f0f77538c ("scsi: core: Cap scsi_host cmd_per_lun at can_queue"), a 416-CPU VM running on Hyper-V hangs during boot because the hv_storvsc driver sets scsi_driver.can_queue to an integer value that exceeds SHRT_MAX, and hence scsi_add_host_with_dma() sets shost->cmd_per_lun to a negative "short" value. Use min_t(int, ...) to work around the issue. Link: https://lore.kernel.org/r/20211008043546.6006-1-decui@microsoft.com Fixes: ea2f0f77538c ("scsi: core: Cap scsi_host cmd_per_lun at can_queue") Cc: stable@vger.kernel.org Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-12Merge tag 'tags/bcm2835-dt-fixes-2021-10-06' into devicetree/fixesFlorian Fainelli
A series of devicetree fixes for the Raspberry Pi 4: - Fix VEC reg address - Fix MDIO address/size cells - Fix regulator states - Fix PCIe address formatting Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-10-12ARM: dts: bcm2711-rpi-4-b: Fix usb's unit addressNicolas Saenz Julienne
The unit address is supposed to represent '<device>,<function>'. Which are both 0 for RPi4b's XHCI controller. On top of that although OpenFirmware states bus number goes in the high part of the last reg parameter, FDT doesn't seem to care for it[1], so remove it. [1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210830103909.323356-1-nsaenzju@redhat.com/#24414633 Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node") Suggested-by: Rob Herring <robh@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210831125843.1233488-2-nsaenzju@redhat.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-10-12ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formattingNicolas Saenz Julienne
dtbs_check currently complains that: arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning (pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format error, expected "0,0" Unsurprisingly pci@0,0 is the right address, as illustrated by its reg property: &pcie0 { pci@0,0 { /* * As defined in the IEEE Std 1275-1994 document, * reg is a five-cell address encoded as (phys.hi * phys.mid phys.lo size.hi size.lo). phys.hi * should contain the device's BDF as 0b00000000 * bbbbbbbb dddddfff 00000000. The other cells * should be zero. */ reg = <0 0 0 0 0>; }; }; The device is clearly 0. So fix it. Also add a missing 'device_type = "pci"'. Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node") Suggested-by: Rob Herring <robh@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210831125843.1233488-1-nsaenzju@redhat.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-10-12ALSA: hda: avoid write to STATESTS if controller is in resetKai Vehmanen
The snd_hdac_bus_reset_link() contains logic to clear STATESTS register before performing controller reset. This code dates back to an old bugfix in commit e8a7f136f5ed ("[ALSA] hda-intel - Improve HD-audio codec probing robustness"). Originally the code was added to azx_reset(). The code was moved around in commit a41d122449be ("ALSA: hda - Embed bus into controller object") and ended up to snd_hdac_bus_reset_link() and called primarily via snd_hdac_bus_init_chip(). The logic to clear STATESTS is correct when snd_hdac_bus_init_chip() is called when controller is not in reset. In this case, STATESTS can be cleared. This can be useful e.g. when forcing a controller reset to retry codec probe. A normal non-power-on reset will not clear the bits. However, this old logic is problematic when controller is already in reset. The HDA specification states that controller must be taken out of reset before writing to registers other than GCTL.CRST (1.0a spec, 3.3.7). The write to STATESTS in snd_hdac_bus_reset_link() will be lost if the controller is already in reset per the HDA specification mentioned. This has been harmless on older hardware. On newer generation of Intel PCIe based HDA controllers, if configured to report issues, this write will emit an unsupported request error. If ACPI Platform Error Interface (APEI) is enabled in kernel, this will end up to kernel log. Fix the code in snd_hdac_bus_reset_link() to only clear the STATESTS if the function is called when controller is not in reset. Otherwise clearing the bits is not possible and should be skipped. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211012142935.3731820-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-12fs/ntfs3: Check for NULL pointers in ni_try_remove_attr_listKonstantin Komarov
Check for potential NULL pointers. Print error message if found. Thread, that leads to this commit: https://lore.kernel.org/ntfs3/227c13e3-5a22-0cba-41eb-fcaf41940711@paragon-software.com/ Reported-by: Mohammad Rasim <mohammad.rasim96@gmail.com> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
2021-10-12ACPI: PM: Include alternate AMDI0005 id in special behaviourSachi King
The Surface Laptop 4 AMD has used the AMD0005 to identify this controller instead of using the appropriate ACPI ID AMDI0005. The AMD0005 needs the same special casing as AMDI0005. Link: https://github.com/linux-surface/acpidumps/tree/master/surface_laptop_4_amd Link: https://gist.github.com/nakato/2a1a7df1a45fe680d7a08c583e1bf863 Signed-off-by: Sachi King <nakato@nakato.io> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Cc: 5.14+ <stable@vger.kernel.org> # 5.14+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-12ALSA: hda/realtek: Fix the mic type detection issue for ASUS G551JWHui Wang
We need to define the codec pin 0x1b to be the mic, but somehow the mic doesn't support hot plugging detection, and Windows also has this issue, so we set it to phantom headset-mic. Also the determine_headset_type() often returns the omtp type by a mistake when we plug a ctia headset, this makes the mic can't record sound at all. Because most of the headset are ctia type nowadays and some machines have the fixed ctia type audio jack, it is possible this machine has the fixed ctia jack too. Here we set this mic jack to fixed ctia type, this could avoid the mic type detection mistake and make the ctia headset work stable. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214537 Reported-and-tested-by: msd <msd.mmq@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20211012114748.5238-1-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-12tee: optee: Fix missing devices unregister during optee_removeSumit Garg
When OP-TEE driver is built as a module, OP-TEE client devices registered on TEE bus during probe should be unregistered during optee_remove. So implement optee_unregister_devices() accordingly. Fixes: c3fa24af9244 ("tee: optee: add TEE bus device enumeration support") Reported-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-10-12ethernet: tulip: avoid duplicate variable name on sparcJakub Kicinski
I recently added a variable called addr to tulip_init_one() but for sparc there's already a variable called that half way thru the function. Rename it to fix build. Fixes: ca8793175564 ("ethernet: tulip: remove direct netdev->dev_addr writes") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12ice: fix locking for Tx timestamp tracking flushJacob Keller
Commit 4dd0d5c33c3e ("ice: add lock around Tx timestamp tracker flush") added a lock around the Tx timestamp tracker flow which is used to cleanup any left over SKBs and prepare for device removal. This lock is problematic because it is being held around a call to ice_clear_phy_tstamp. The clear function takes a mutex to send a PHY write command to firmware. This could lead to a deadlock if the mutex actually sleeps, and causes the following warning on a kernel with preemption debugging enabled: [ 715.419426] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:573 [ 715.427900] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 3100, name: rmmod [ 715.435652] INFO: lockdep is turned off. [ 715.439591] Preemption disabled at: [ 715.439594] [<0000000000000000>] 0x0 [ 715.446678] CPU: 52 PID: 3100 Comm: rmmod Tainted: G W OE 5.15.0-rc4+ #42 bdd7ec3018e725f159ca0d372ce8c2c0e784891c [ 715.458058] Hardware name: Intel Corporation S2600STQ/S2600STQ, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020 [ 715.468483] Call Trace: [ 715.470940] dump_stack_lvl+0x6a/0x9a [ 715.474613] ___might_sleep.cold+0x224/0x26a [ 715.478895] __mutex_lock+0xb3/0x1440 [ 715.482569] ? stack_depot_save+0x378/0x500 [ 715.486763] ? ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.494979] ? kfree+0xc1/0x520 [ 715.498128] ? mutex_lock_io_nested+0x12a0/0x12a0 [ 715.502837] ? kasan_set_free_info+0x20/0x30 [ 715.507110] ? __kasan_slab_free+0x10b/0x140 [ 715.511385] ? slab_free_freelist_hook+0xc7/0x220 [ 715.516092] ? kfree+0xc1/0x520 [ 715.519235] ? ice_deinit_lag+0x16c/0x220 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.527359] ? ice_remove+0x1cf/0x6a0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.535133] ? pci_device_remove+0xab/0x1d0 [ 715.539318] ? __device_release_driver+0x35b/0x690 [ 715.544110] ? driver_detach+0x214/0x2f0 [ 715.548035] ? bus_remove_driver+0x11d/0x2f0 [ 715.552309] ? pci_unregister_driver+0x26/0x250 [ 715.556840] ? ice_module_exit+0xc/0x2f [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.564799] ? __do_sys_delete_module.constprop.0+0x2d8/0x4e0 [ 715.570554] ? do_syscall_64+0x3b/0x90 [ 715.574303] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [ 715.579529] ? start_flush_work+0x542/0x8f0 [ 715.583719] ? ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.591923] ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.599960] ? wait_for_completion_io+0x250/0x250 [ 715.604662] ? lock_acquire+0x196/0x200 [ 715.608504] ? do_raw_spin_trylock+0xa5/0x160 [ 715.612864] ice_sbq_rw_reg+0x1e6/0x2f0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.620813] ? ice_reset+0x130/0x130 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.628497] ? __debug_check_no_obj_freed+0x1e8/0x3c0 [ 715.633550] ? trace_hardirqs_on+0x1c/0x130 [ 715.637748] ice_write_phy_reg_e810+0x70/0xf0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.646220] ? do_raw_spin_trylock+0xa5/0x160 [ 715.650581] ? ice_ptp_release+0x910/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.658797] ? ice_ptp_release+0x255/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.667013] ice_clear_phy_tstamp+0x2c/0x110 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.675403] ice_ptp_release+0x408/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.683440] ice_remove+0x560/0x6a0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.691037] ? _raw_spin_unlock_irqrestore+0x46/0x73 [ 715.696005] pci_device_remove+0xab/0x1d0 [ 715.700018] __device_release_driver+0x35b/0x690 [ 715.704637] driver_detach+0x214/0x2f0 [ 715.708389] bus_remove_driver+0x11d/0x2f0 [ 715.712489] pci_unregister_driver+0x26/0x250 [ 715.716857] ice_module_exit+0xc/0x2f [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.724637] __do_sys_delete_module.constprop.0+0x2d8/0x4e0 [ 715.730210] ? free_module+0x6d0/0x6d0 [ 715.733963] ? task_work_run+0xe1/0x170 [ 715.737803] ? exit_to_user_mode_loop+0x17f/0x1d0 [ 715.742509] ? rcu_read_lock_sched_held+0x12/0x80 [ 715.747215] ? trace_hardirqs_on+0x1c/0x130 [ 715.751401] do_syscall_64+0x3b/0x90 [ 715.754981] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 715.760033] RIP: 0033:0x7f4dfe59000b [ 715.763612] Code: 73 01 c3 48 8b 0d 6d 1e 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 1e 0c 00 f7 d8 64 89 01 48 [ 715.782357] RSP: 002b:00007ffe8c891708 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 715.789923] RAX: ffffffffffffffda RBX: 00005558a20468b0 RCX: 00007f4dfe59000b [ 715.797054] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005558a2046918 [ 715.804189] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 715.811319] R10: 00007f4dfe603ac0 R11: 0000000000000206 R12: 00007ffe8c891940 [ 715.818455] R13: 00007ffe8c8920a3 R14: 00005558a20462a0 R15: 00005558a20468b0 Notice that this is the only case where we use the lock in this way. In the cleanup kthread and work kthread the lock is only taken around the bit accesses. This was done intentionally to avoid this kind of issue. The way the lock is used, we only protect ordering of bit sets vs bit clears. The Tx writers in the hot path don't need to be protected against the entire kthread loop. The Tx queues threads only need to ensure that they do not re-use an index that is currently in use. The cleanup loop does not need to block all new set bits, since it will re-queue itself if new timestamps are present. Fix the tracker flow so that it uses the same flow as the standard cleanup thread. In addition, ensure the in_use bitmap actually gets cleared properly. This fixes the warning and also avoids the potential deadlock that might have occurred otherwise. Fixes: 4dd0d5c33c3e ("ice: add lock around Tx timestamp tracker flush") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12s390: fix strrchr() implementationRoberto Sassu
Fix two problems found in the strrchr() implementation for s390 architectures: evaluate empty strings (return the string address instead of NULL, if '\0' is passed as second argument); evaluate the first character of non-empty strings (the current implementation stops at the second). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reported-by: Heiko Carstens <hca@linux.ibm.com> (incorrect behavior with empty strings) Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Link: https://lore.kernel.org/r/20211005120836.60630-1-roberto.sassu@huawei.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-12vfio-ccw: step down as maintainerCornelia Huck
I currently don't have time to act as vfio-ccw maintainer anymore, but I trust that I leave it in capable hands. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Eric Farman <farman@linux.ibm.com> Acked-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Link: https://lore.kernel.org/r/20211006160120.217636-3-cohuck@redhat.com Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-12KVM: s390: remove myself as reviewerCornelia Huck
I currently don't have time anymore to review KVM/s390 code. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Link: https://lore.kernel.org/r/20211006160120.217636-2-cohuck@redhat.com Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-12Merge branch 'ioam-fixes'David S. Miller
Justin Iurman says: ==================== Correct the IOAM behavior for undefined trace type bits (@Jakub @David: there will be a conflict for #2 when merging net->net-next, due to commit [1]. The conflict is only 5-10 lines for #2 (#1 should be fine) inside the file tools/testing/selftests/net/ioam6.sh, so quite short though possibly ugly. Sorry for that, I didn't expect to post this one... Had I known, I'd have made the opposite.) Modify both the input and output behaviors regarding the trace type when one of the undefined bits is set. The goal is to keep the interoperability when new fields (aka new bits inside the range 12-21) will be defined. The draft [2] says the following: --------------------------------------------------------------- "Bit 12-21 Undefined. These values are available for future assignment in the IOAM Trace-Type Registry (Section 8.2). Every future node data field corresponding to one of these bits MUST be 4-octets long. An IOAM encapsulating node MUST set the value of each undefined bit to 0. If an IOAM transit node receives a packet with one or more of these bits set to 1, it MUST either: 1. Add corresponding node data filled with the reserved value 0xFFFFFFFF, after the node data fields for the IOAM-Trace-Type bits defined above, such that the total node data added by this node in units of 4-octets is equal to NodeLen, or 2. Not add any node data fields to the packet, even for the IOAM-Trace-Type bits defined above." --------------------------------------------------------------- The output behavior has been modified to respect the fact that "an IOAM encap node MUST set the value of each undefined bit to 0" (i.e., undefined bits can't be set anymore). As for the input behavior, current implementation is based on the second choice (i.e., "not add any data fields to the packet [...]"). With this solution, any interoperability is lost (i.e., if a new bit is defined, then an "old" kernel implementation wouldn't fill IOAM data when such new bit is set inside the trace type). The input behavior is therefore relaxed and these undefined bits are now allowed to be set. It is only possible thanks to the sentence "every future node data field corresponding to one of these bits MUST be 4-octets long". Indeed, the default empty value (the one for 4-octet fields) is inserted whenever an undefined bit is set. [1] cfbe9b002109621bf9a282a4a24f9415ef14b57b [2] https://datatracker.ietf.org/doc/html/draft-ietf-ippm-ioam-data#section-5.4.1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12selftests: net: modify IOAM tests for undef bitsJustin Iurman
The output behavior for undefined bits is now directly tested inside the bash script. Trying to set an undefined bit should be refused. The input behavior for undefined bits has been removed due to the fact that we would need another sender allowed to set undefined bits. Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12ipv6: ioam: move the check for undefined bitsJustin Iurman
The check for undefined bits in the trace type is moved from the input side to the output side, while the input side is relaxed and now inserts default empty values when an undefined bit is set. Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12regmap: Fix possible double-free in regcache_rbtree_exit()Yang Yingliang
In regcache_rbtree_insert_to_block(), when 'present' realloc failed, the 'blk' which is supposed to assign to 'rbnode->block' will be freed, so 'rbnode->block' points a freed memory, in the error handling path of regcache_rbtree_init(), 'rbnode->block' will be freed again in regcache_rbtree_exit(), KASAN will report double-free as follows: BUG: KASAN: double-free or invalid-free in kfree+0xce/0x390 Call Trace: slab_free_freelist_hook+0x10d/0x240 kfree+0xce/0x390 regcache_rbtree_exit+0x15d/0x1a0 regcache_rbtree_init+0x224/0x2c0 regcache_init+0x88d/0x1310 __regmap_init+0x3151/0x4a80 __devm_regmap_init+0x7d/0x100 madera_spi_probe+0x10f/0x333 [madera_spi] spi_probe+0x183/0x210 really_probe+0x285/0xc30 To fix this, moving up the assignment of rbnode->block to immediately after the reallocation has succeeded so that the data structure stays valid even if the second reallocation fails. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 3f4ff561bc88b ("regmap: rbtree: Make cache_present bitmap per node") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20211012023735.1632786-1-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12ASoC: cs42l42: Ensure 0dB full scale volume is used for headsetsStefan Binding
Ensure the default 0dB playback path is always used. The code that set FULL_SCALE_VOL based on LOAD_DET_RCSTAT was spurious, and resulted in a -6dB attenuation being accidentally inserted into the playback path. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211011144903.28915-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12net: dsa: microchip: Added the condition for scheduling ksz_mib_read_workArun Ramadoss
When the ksz module is installed and removed using rmmod, kernel crashes with null pointer dereferrence error. During rmmod, ksz_switch_remove function tries to cancel the mib_read_workqueue using cancel_delayed_work_sync routine and unregister switch from dsa. During dsa_unregister_switch it calls ksz_mac_link_down, which in turn reschedules the workqueue since mib_interval is non-zero. Due to which queue executed after mib_interval and it tries to access dp->slave. But the slave is unregistered in the ksz_switch_remove function. Hence kernel crashes. To avoid this crash, before canceling the workqueue, resetted the mib_interval to 0. v1 -> v2: -Removed the if condition in ksz_mib_read_work Fixes: 469b390e1ba3 ("net: dsa: microchip: use delayed_work instead of timer + work") Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12r8152: select CRC32 and CRYPTO/CRYPTO_HASH/CRYPTO_SHA256Vegard Nossum
Fix the following build/link errors by adding a dependency on CRYPTO, CRYPTO_HASH, CRYPTO_SHA256 and CRC32: ld: drivers/net/usb/r8152.o: in function `rtl8152_fw_verify_checksum': r8152.c:(.text+0x2b2a): undefined reference to `crypto_alloc_shash' ld: r8152.c:(.text+0x2bed): undefined reference to `crypto_shash_digest' ld: r8152.c:(.text+0x2c50): undefined reference to `crypto_destroy_tfm' ld: drivers/net/usb/r8152.o: in function `_rtl8152_set_rx_mode': r8152.c:(.text+0xdcb0): undefined reference to `crc32_le' Fixes: 9370f2d05a2a1 ("r8152: support request_firmware for RTL8153") Fixes: ac718b69301c7 ("net/usb: new driver for RTL8152") Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12net: dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY'sMaarten Zanders
mv88e6xxx_port_ppu_updates() interpretes data in the PORT_STS register incorrectly for internal ports (ie no PPU). In these cases, the PHY_DETECT bit indicates link status. This results in forcing the MAC state whenever the PHY link goes down which is not intended. As a side effect, LED's configured to show link status stay lit even though the physical link is down. Add a check in mac_link_down and mac_link_up to see if it concerns an external port and only then, look at PPU status. Fixes: 5d5b231da7ac (net: dsa: mv88e6xxx: use PHY_DETECT in mac_link_up/mac_link_down) Reported-by: Maarten Zanders <m.zanders@televic.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Maarten Zanders <maarten.zanders@mind.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12net: hns3: debugfs add support dumping page pool infoHao Chen
Add a file node "page_pool_info" for debugfs, then cat this file node to dump page pool info as below: QUEUE_ID ALLOCATE_CNT FREE_CNT POOL_SIZE(PAGE_NUM) ORDER NUMA_ID MAX_LEN 0 512 0 512 0 2 4K 1 512 0 512 0 2 4K 2 512 0 512 0 2 4K 3 512 0 512 0 2 4K 4 512 0 512 0 2 4K Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12tulip: fix setting device address from romJakub Kicinski
I missed removing i from the array index when converting from a loop to a direct copy. Fixes: ca8793175564 ("ethernet: tulip: remove direct netdev->dev_addr writes") Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12Merge branch 'Managed-Neighbor-Entries'David S. Miller
Daniel Borkmann says: ==================== Managed Neighbor Entries This series adds a couple of fixes related to NTF_EXT_LEARNED and NTF_USE neighbor flags, extends the UAPI with a new NDA_FLAGS_EXT netlink attribute in order to be able to add new neighbor flags from user space given all current struct ndmsg / ndm_flags bits are used up. Finally, the core of this series adds a new NTF_EXT_MANAGED flag to neighbors, which allows user space control planes to add 'managed' neighbor entries. Meaning, user space may either transition existing entries or can push down new L3 entries without lladdr into the kernel where the latter will periodically try to keep such NTF_EXT_MANAGED managed entries in reachable state. Main use case for this series are XDP / tc BPF load-balancers which make use of the bpf_fib_lookup() helper for backends. For more details, please see individual patches. Thanks! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12net, neigh: Add NTF_MANAGED flag for managed neighbor entriesDaniel Borkmann
Allow a user space control plane to insert entries with a new NTF_EXT_MANAGED flag. The flag then indicates to the kernel that the neighbor entry should be periodically probed for keeping the entry in NUD_REACHABLE state iff possible. The use case for this is targeting XDP or tc BPF load-balancers which use the bpf_fib_lookup() BPF helper in order to piggyback on neighbor resolution for their backends. Given they cannot be resolved in fast-path, a control plane inserts the L3 (without L2) entries manually into the neighbor table and lets the kernel do the neighbor resolution either on the gateway or on the backend directly in case the latter resides in the same L2. This avoids to deal with L2 in the control plane and to rebuild what the kernel already does best anyway. NTF_EXT_MANAGED can be combined with NTF_EXT_LEARNED in order to avoid GC eviction. The kernel then adds NTF_MANAGED flagged entries to a per-neighbor table which gets triggered by the system work queue to periodically call neigh_event_send() for performing the resolution. The implementation allows migration from/to NTF_MANAGED neighbor entries, so that already existing entries can be converted by the control plane if needed. Potentially, we could make the interval for periodically calling neigh_event_send() configurable; right now it's set to DELAY_PROBE_TIME which is also in line with mlxsw which has similar driver-internal infrastructure c723c735fa6b ("mlxsw: spectrum_router: Periodically update the kernel's neigh table"). In future, the latter could possibly reuse the NTF_MANAGED neighbors as well. Example: # ./ip/ip n replace 192.168.178.30 dev enp5s0 managed extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a managed extern_learn REACHABLE [...] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Roopa Prabhu <roopa@nvidia.com> Link: https://linuxplumbersconf.org/event/11/contributions/953/ Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12net, neigh: Extend neigh->flags to 32 bit to allow for extensionsRoopa Prabhu
Currently, all bits in struct ndmsg's ndm_flags are used up with the most recent addition of 435f2e7cc0b7 ("net: bridge: add support for sticky fdb entries"). This makes it impossible to extend the neighboring subsystem with new NTF_* flags: struct ndmsg { __u8 ndm_family; __u8 ndm_pad1; __u16 ndm_pad2; __s32 ndm_ifindex; __u16 ndm_state; __u8 ndm_flags; __u8 ndm_type; }; There are ndm_pad{1,2} attributes which are not used. However, due to uncareful design, the kernel does not enforce them to be zero upon new neighbor entry addition, and given they've been around forever, it is not possible to reuse them today due to risk of breakage. One option to overcome this limitation is to add a new NDA_FLAGS_EXT attribute for extended flags. In struct neighbour, there is a 3 byte hole between protocol and ha_lock, which allows neigh->flags to be extended from 8 to 32 bits while still being on the same cacheline as before. This also allows for all future NTF_* flags being in neigh->flags rather than yet another flags field. Unknown flags in NDA_FLAGS_EXT will be rejected by the kernel. Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12net, neigh: Enable state migration between NUD_PERMANENT and NTF_USEDaniel Borkmann
Currently, it is not possible to migrate a neighbor entry between NUD_PERMANENT state and NTF_USE flag with a dynamic NUD state from a user space control plane. Similarly, it is not possible to add/remove NTF_EXT_LEARNED flag from an existing neighbor entry in combination with NTF_USE flag. This is due to the latter directly calling into neigh_event_send() without any meta data updates as happening in __neigh_update(). Thus, to enable this use case, extend the latter with a NEIGH_UPDATE_F_USE flag where we break the NUD_PERMANENT state in particular so that a latter neigh_event_send() is able to re-resolve a neighbor entry. Before fix, NUD_PERMANENT -> NUD_* & NTF_USE: # ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT [...] As can be seen, despite the admin-triggered replace, the entry remains in the NUD_PERMANENT state. After fix, NUD_PERMANENT -> NUD_* & NTF_USE: # ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE [...] # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn STALE [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT [...] After the fix, the admin-triggered replace switches to a dynamic state from the NTF_USE flag which triggered a new neighbor resolution. Likewise, we can transition back from there, if needed, into NUD_PERMANENT. Similar before/after behavior can be observed for below transitions: Before fix, NTF_USE -> NTF_USE | NTF_EXT_LEARNED -> NTF_USE: # ./ip/ip n replace 192.168.178.30 dev enp5s0 use # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE [...] After fix, NTF_USE -> NTF_USE | NTF_EXT_LEARNED -> NTF_USE: # ./ip/ip n replace 192.168.178.30 dev enp5s0 use # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 use # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE [..] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12net, neigh: Fix NTF_EXT_LEARNED in combination with NTF_USEDaniel Borkmann
The NTF_EXT_LEARNED neigh flag is usually propagated back to user space upon dump of the neighbor table. However, when used in combination with NTF_USE flag this is not the case despite exempting the entry from the garbage collector. This results in inconsistent state since entries are typically marked in neigh->flags with NTF_EXT_LEARNED, but here they are not. Fix it by propagating the creation flag to ___neigh_create(). Before fix: # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE [...] After fix: # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE [...] Fixes: 9ce33e46531d ("neighbour: support for NTF_EXT_LEARNED flag") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12net: hns: Prefer struct_size over open coded arithmeticLen Baker
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, take the opportunity to refactor the hnae_handle structure to switch the last member to flexible array, changing the code accordingly. Also, fix the comment in the hnae_vf_cb structure to inform that the ae_handle member must be the last member. Then, use the struct_size() helper to do the arithmetic instead of the argument "size + count * size" in the kzalloc() function. This code was detected with the help of Coccinelle and audited and fixed manually. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by: Len Baker <len.baker@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12net: mscc: ocelot: Fix dumplicated argument in ocelotWan Jiabing
Fix the following coccicheck warning: drivers/net/ethernet/mscc/ocelot.c:474:duplicated argument to & or | drivers/net/ethernet/mscc/ocelot.c:476:duplicated argument to & or | drivers/net/ethernet/mscc/ocelot_net.c:1627:duplicated argument to & or | These DEV_CLOCK_CFG_MAC_TX_RST are duplicate here. Here should be DEV_CLOCK_CFG_MAC_RX_RST. Fixes: e6e12df625f2 ("net: mscc: ocelot: convert to phylink") Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12Merge branch 'mlxsw-ECN-mirroring'David S. Miller
Ido Schimmel says: ==================== mlxsw: Add support for ECN mirroring Petr says: Patches in this set have been floating around for some time now together with trap_fwd support. That will however need more work, time for which is nowhere to be found, apparently. Instead, this patchset enables offload of only packet mirroring on RED mark qevent, enabling mirroring of ECN-marked packets. Formally it enables offload of filters added to blocks bound to the RED qevent mark if: - The switch ASIC is Spectrum-2 or above. - Only a single filter is attached at the block, at chain 0 (the default), and its classifier is matchall. - The filter has hw_stats set to disabled. - The filter has a single action, which is mirror. This differs from early_drop qevent offload, which supports mirroring and trapping. However trapping in context of ECN-marked packets is not suitable, because the HW does not drop the packet, as the trap action implies. And there is as of now no way to express only the part of trapping that transfers the packet to the SW datapath, sans the HW-datapath drop. The patchset progresses as follows: Patch #1 is an extack propagation. Mirroring of ECN-marked packets is configured in the ASIC through an ECN trigger, which is considered "egress", unlike the EARLY_DROP trigger. In patch #2, add a helper to classify triggers as ingress. As clarified above, traps cannot be offloaded on mark qevent. Similarly, given a trap_fwd action, it would not be offloadable on early_drop qevent. In patch #3, introduce support for tracking actions permissible on a given block. Patch #4 actually adds the mark qevent offload. In patch #5, fix a small style issue in one of the selftests, and in patch #6 add mark offload selftests. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-22 16:39:51 +0000