| Age | Commit message (Collapse) | Author |
|---|
|
ENOTSUP is just an internal kernel error and should never reach
userspace. The return value of the share function is not exported to
userspace, but to avoid giving bad examples let us use EOPNOTSUPP:
Suggested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The s390 CPU Measurement sampling facility has an overflow condition
which fires when all entries in a SBD are used.
The measurement alert interrupt is triggered and reads out all samples
in this SDB. It then tests the successor SDB, if this SBD is not full,
the interrupt handler does not read any samples at all from this SDB
The design waits for the hardware to fill this SBD and then trigger
another meassurement alert interrupt.
This scheme works nicely until
an perf_event_overflow() function call discards the sample due to
a too high sampling rate.
The interrupt handler has logic to read out a partially filled SDB
when the perf event overflow condition in linux common code is met.
This causes the CPUM sampling measurement hardware and the PMU
device driver to operate on the same SBD's trailer entry.
This should not happen.
This can be seen here using this trace:
cpumsf_pmu_add: tear:0xb5286000
hw_perf_event_update: sdbt 0xb5286000 full 1 over 0 flush_all:0
hw_perf_event_update: sdbt 0xb5286008 full 0 over 0 flush_all:0
above shows 1. interrupt
hw_perf_event_update: sdbt 0xb5286008 full 1 over 0 flush_all:0
hw_perf_event_update: sdbt 0xb5286008 full 0 over 0 flush_all:0
above shows 2. interrupt
... this goes on fine until...
hw_perf_event_update: sdbt 0xb5286068 full 1 over 0 flush_all:0
perf_push_sample1: overflow
one or more samples read from the IRQ handler are rejected by
perf_event_overflow() and the IRQ handler advances to the next SDB
and modifies the trailer entry of a partially filled SDB.
hw_perf_event_update: sdbt 0xb5286070 full 0 over 0 flush_all:1
timestamp: 14:32:52.519953
Next time the IRQ handler is called for this SDB the trailer entry shows
an overflow count of 19 missed entries.
hw_perf_event_update: sdbt 0xb5286070 full 1 over 19 flush_all:1
timestamp: 14:32:52.970058
Remove access to a follow on SDB when event overflow happened.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Function perf_event_ever_overflow() and perf_event_account_interrupt()
are called every time samples are processed by the interrupt handler.
However function perf_event_account_interrupt() has checks to avoid being
flooded with interrupts (more then 1000 samples are received per
task_tick). Samples are then dropped and a PERF_RECORD_THROTTLED is
added to the perf data. The perf subsystem limit calculation is:
maximum sample frequency := 100000 --> 1 samples per 10 us
task_tick = 10ms = 10000us --> 1000 samples per task_tick
The work flow is
measurement_alert() uses SDBT head and each SBDT points to 511
SDB pages, each with 126 sample entries. After processing 8 SBDs
and for each valid sample calling:
perf_event_overflow()
perf_event_account_interrupts()
there is a considerable amount of samples being dropped, especially when
the sample frequency is very high and near the 100000 limit.
To avoid the high amount of samples being dropped near the end of a
task_tick time frame, increment the sampling interval in case of
dropped events. The CPU Measurement sampling facility on the s390
supports only intervals, specifiing how many CPU cycles have to be
executed before a sample is generated. Increase the interval when the
samples being generated hit the task_tick limit.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
There is a spelling mistake in a pr_info message. Fix it.
Link: https://lkml.kernel.org/r/20191202090215.28766-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
arch_spin_lock_wait does not take steal time into consideration.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
For super_90_load, we need to make sure 'desc_nr' less
than MD_SB_DISKS, avoiding invalid memory access of 'sb->disks'.
Fixes: 228fc7d76db6 ("md: avoid invalid memory access for array sb->dev_roles")
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
In raid1_sync_request func, rdev should be checked before reference.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
With commit 6ce220dd2f8ea71d6afc29b9a7524c12e39f374a ("raid5: don't set
STRIPE_HANDLE to stripe which is in batch list"), we don't want to set
STRIPE_HANDLE flag for sh which is already in batch list.
However, the stripe which is the head of batch list should set this flag,
otherwise panic could happen inside init_stripe at BUG_ON(sh->batch_head),
it is reproducible with raid5 on top of nvdimm devices per Xiao oberserved.
Thanks for Xiao's effort to verify the change.
Fixes: 6ce220dd2f8ea ("raid5: don't set STRIPE_HANDLE to stripe which is in batch list")
Reported-by: Xiao Ni <xni@redhat.com>
Tested-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
Show the name of each volume in /proc/net/afs/<cell>/volumes to make it
easier to work out the name corresponding to a volume ID. This makes it
easier to work out which mounts in /proc/mounts correspond to which volume
ID.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
|
|
Fix missing cell comparison in afs_test_super(). Without this, any pair
volumes that have the same volume ID will share a superblock, no matter the
cell, unless they're in different network namespaces.
Normally, most users will only deal with a single cell and so they won't
see this. Even if they do look into a second cell, they won't see a
problem unless they happen to hit a volume with the same ID as one they've
already got mounted.
Before the patch:
# ls /afs/grand.central.org/archive
linuxdev/ mailman/ moin/ mysql/ pipermail/ stage/ twiki/
# ls /afs/kth.se/
linuxdev/ mailman/ moin/ mysql/ pipermail/ stage/ twiki/
# cat /proc/mounts | grep afs
none /afs afs rw,relatime,dyn,autocell 0 0
#grand.central.org:root.cell /afs/grand.central.org afs ro,relatime 0 0
#grand.central.org:root.archive /afs/grand.central.org/archive afs ro,relatime 0 0
#grand.central.org:root.archive /afs/kth.se afs ro,relatime 0 0
After the patch:
# ls /afs/grand.central.org/archive
linuxdev/ mailman/ moin/ mysql/ pipermail/ stage/ twiki/
# ls /afs/kth.se/
admin/ common/ install/ OldFiles/ service/ system/
bakrestores/ home/ misc/ pkg/ src/ wsadmin/
# cat /proc/mounts | grep afs
none /afs afs rw,relatime,dyn,autocell 0 0
#grand.central.org:root.cell /afs/grand.central.org afs ro,relatime 0 0
#grand.central.org:root.archive /afs/grand.central.org/archive afs ro,relatime 0 0
#kth.se:root.cell /afs/kth.se afs ro,relatime 0 0
Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Carsten Jacobi <jacobi@de.ibm.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Jonathan Billings <jsbillings@jsbillings.org>
cc: Todd DeSantis <atd@us.ibm.com>
|
|
Fix the lookup method on the dynamic root directory such that creation
calls, such as mkdir, open(O_CREAT), symlink, etc. fail with EOPNOTSUPP
rather than failing with some odd error (such as EEXIST).
lookup() itself tries to create automount directories when it is invoked.
These are cached locally in RAM and not committed to storage.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Jonathan Billings <jsbillings@jsbillings.org>
|
|
On an old perl such as v5.10.1, `kselftest/prefix.pl` gives below error
message:
Can't locate object method "autoflush" via package "IO::Handle" at kselftest/prefix.pl line 10.
This commit fixes the error by explicitly specifying the use of the
`IO::Handle` package.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
If a timeout failure occurs, kselftest kills the test process and prints
the timeout log. If the test process has killed while printing a log
that ends with new line, the timeout log can be printed in middle of the
test process output so that it can be seems like a comment, as below:
# test_process_log not ok 3 selftests: timers: nsleep-lat # TIMEOUT
This commit avoids such problem by printing one more line before the
TIMEOUT failure log.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit c78fd76f2b67 ("selftests: Move kselftest_module.sh into
kselftest/") moved kselftest_module.sh but missed updating a few
references to the path in documentation.
Fixes: c78fd76f2b67 ("selftests: Move kselftest_module.sh into kselftest/")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Each AFS mountpoint has strings that define the target to be mounted. This
is required to end in a dot that is supposed to be stripped off. The
string can include suffixes of ".readonly" or ".backup" - which are
supposed to come before the terminal dot. To add to the confusion, the "fs
lsmount" afs utility does not show the terminal dot when displaying the
string.
The kernel mount source string parser, however, assumes that the terminal
dot marks the suffix and that the suffix is always "" and is thus ignored.
In most cases, there is no suffix and this is not a problem - but if there
is a suffix, it is lost and this affects the ability to mount the correct
volume.
The command line mount command, on the other hand, is expected not to
include a terminal dot - so the problem doesn't arise there.
Fix this by making sure that the dot exists and then stripping it when
passing the string to the mount configuration.
Fixes: bec5eb614130 ("AFS: Implement an autocell mount capability [ver #2]")
Reported-by: Jonathan Billings <jsbillings@jsbillings.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Jonathan Billings <jsbillings@jsbillings.org>
|
|
into arm/fixes
Reset controller fixes for v5.5, part 2
Fix the example in the brcmstb-reset device tree bindings, remove a bogus
resource alignment check from the reset-brcmstb driver, fix the documented
return value type for the reset_control_array_get functions, and fix a
devres memory leak when requesting optional, not present reset controls.
* tag 'reset-fixes-for-v5.5-2' of git://git.pengutronix.de/git/pza/linux:
reset: Do not register resource data for missing resets
reset: Fix {of,devm}_reset_control_array_get kerneldoc return types
reset: brcmstb: Remove resource checks
dt-bindings: reset: Fix brcmstb-reset example
Link: https://lore.kernel.org/r/bb59b9f83892aa3c876f5da87890b0496f2dc755.camel@pengutronix.de
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
v5.5-rc1, please pull the following:
- Nicolas fixes the SoC's dma-range property to cover the full 1GB
aperture
- Stefan fixes the critical temperature trip point to be set before the
firmware performs thermal throttling
- Florian fixes the BCM5301X and Cygnus MDIO nodes to have corrected
#address-cells and #size-cells properties
* tag 'arm-soc/for-5.5/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm283x: Fix critical trip point
ARM: dts: Cygnus: Fix MDIO node address/size cells
ARM: dts: bcm2711: fix soc's node dma-ranges
ARM: dts: BCM5301X: Fix MDIO node address/size cells
Link: https://lore.kernel.org/r/20191210205850.12442-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The file was moved, causing a build error:
In file included from /git/arm-soc/arch/arm/mach-mmp/pxa168.c:28:
arch/arm/mach-mmp/pxa168.h:22:10: fatal error: cputype.h: No such file or directory
Include it from the new location.
Link: https://lore.kernel.org/r/20191210203409.2875880-1-arnd@arndb.de
Fixes: 32adcaa010fa ("ARM: mmp: move cputype.h to include/linux/soc/")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The LCD panel on AM4 GP EVMs and ePOS boards seems to be
osd070t1718-19ts. The current dts files say osd057T0559-34ts. Possibly
the panel has changed since the early EVMs, or there has been a mistake
with the panel type.
Update the DT files accordingly.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
When switching ChipSelect from default CS0 to any other CS, driver fails
to update the bits in system control module register that control which
CS is mapped for MMIO access. This causes reads to fail when driver
tries to access QSPI flash on CS1/2/3.
Fix this by updating appropriate bits whenever active CS changes.
Reported-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20191211155216.30212-1-vigneshr@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We need the of_match table if we want to use the compatible string in
the pmic's child node and get the regulator driver loaded automatically.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20191210100725.11005-1-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Before this patch, perf expected that there might be NPROC*4 unique
cache entries at max, however, it also expected that some of them would
be shared and/or of the same size, thus the final number of entries
would be reduced to be lower than NPROC*4. In case the number of entries
hadn't been reduced (was NPROC*4), the warning was printed.
However, some systems might have unusual cache topology, such as the
following two-processor KVM guest:
cpu level shared_cpu_list size
0 1 0 32K
0 1 0 64K
0 2 0 512K
0 3 0 8192K
1 1 1 32K
1 1 1 64K
1 2 1 512K
1 3 1 8192K
This KVM guest has 8 (NPROC*4) unique cache entries, which used to make
perf printing the message, although there actually aren't "way too many
cpu caches".
v2: Removing unused argument.
v3: Unifying the way we obtain number of cpus.
v4: Removed '& UINT_MAX' construct which is redundant.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
LPU-Reference: 20191208162056.20772-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit f01642e4912b ("perf metricgroup: Support multiple events for
metricgroup") introduced support for multiple events in a metric group.
But with the current upstream, metric events names are not printed
properly
In power9 platform:
command:# ./perf stat --metric-only -M translation -C 0 -I 1000 sleep 2
1.000208486
2.000368863
2.001400558
Similarly in skylake platform:
command:./perf stat --metric-only -M Power -I 1000
1.000579994
2.002189493
With current upstream version, issue is with event name comparison logic
in find_evsel_group(). Current logic is to compare events belonging to a
metric group to the events in perf_evlist. Since the break statement is
missing in the loop used for comparison between metric group and
perf_evlist events, the loop continues to execute even after getting a
pattern match, and end up in discarding the matches.
Incase of single metric event belongs to metric group, its working fine,
because in case of single event once it compare all events it reaches to
end of perf_evlist.
Example for single metric event in power9 platform:
command:# ./perf stat --metric-only -M branches_per_inst -I 1000 sleep 1
1.000094653 0.2
1.001337059 0.0
This patch fixes the issue by making sure once we found all events
belongs to that metric event matched in find_evsel_group(), we
successfully break from that loop by adding corresponding condition.
With this patch:
In power9 platform:
command:# ./perf stat --metric-only -M translation -C 0 -I 1000 sleep 2
result:#
time derat_4k_miss_rate_percent derat_4k_miss_ratio derat_miss_ratio derat_64k_miss_rate_percent derat_64k_miss_ratio dslb_miss_rate_percent islb_miss_rate_percent
1.000135672 0.0 0.3 1.0 0.0 0.2 0.0 0.0
2.000380617 0.0 0.0 0.0 0.0 0.0 0.0 0.0
command:# ./perf stat --metric-only -M Power -I 1000
Similarly in skylake platform:
result:#
time Turbo_Utilization C3_Core_Residency C6_Core_Residency C7_Core_Residency C2_Pkg_Residency C3_Pkg_Residency C6_Pkg_Residency C7_Pkg_Residency
1.000563580 0.3 0.0 2.6 44.2 21.9 0.0 0.0 0.0
2.002235027 0.4 0.0 2.7 43.0 20.7 0.0 0.0 0.0
Committer testing:
Before:
[root@seventh ~]# perf stat --metric-only -M Power -I 1000
# time
1.000383223
2.001168182
3.001968545
4.002741200
5.003442022
^C 5.777687244
[root@seventh ~]#
After the patch:
[root@seventh ~]# perf stat --metric-only -M Power -I 1000
# time Turbo_Utilization C3_Core_Residency C6_Core_Residency C7_Core_Residency C2_Pkg_Residency C3_Pkg_Residency C6_Pkg_Residency C7_Pkg_Residency
1.000406577 0.4 0.1 1.4 97.0 0.0 0.0 0.0 0.0
2.001481572 0.3 0.0 0.6 97.9 0.0 0.0 0.0 0.0
3.002332585 0.2 0.0 1.0 97.5 0.0 0.0 0.0 0.0
4.003196624 0.2 0.0 0.3 98.6 0.0 0.0 0.0 0.0
5.004063851 0.3 0.0 0.7 97.7 0.0 0.0 0.0 0.0
^C 5.471260276 0.2 0.0 0.5 49.3 0.0 0.0 0.0 0.0
[root@seventh ~]#
[root@seventh ~]# dmesg | grep -i skylake
[ 0.187807] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[root@seventh ~]#
Fixes: f01642e4912b ("perf metricgroup: Support multiple events for metricgroup")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191120084059.24458-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Kernel Utilization should divide ref cycles spent in kernel with total
ref cycles.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191204162121.29998-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'perf top' stopped working on hw architectures that do not provide a
get_cpuid() implementation and thus fallback to the weak get_cpuid()
default function.
This is done because at annotation time we may need it in the arch
specific annotation init routine, but that is only being used by arches
that do provide a get_cpuid() implementation:
$ find tools/ -name "*.[ch]" | xargs grep 'evlist->env'
tools/perf/builtin-top.c: top.evlist->env = &perf_env;
tools/perf/util/evsel.c: return evsel->evlist->env;
tools/perf/util/s390-cpumsf.c: sf->machine_type = s390_cpumsf_get_type(session->evlist->env->cpuid);
tools/perf/util/header.c: session->evlist->env = &header->env;
tools/perf/util/sample-raw.c: const char *arch_pf = perf_env__arch(evlist->env);
$
$ find tools/perf/arch -name "*.[ch]" | xargs grep -w get_cpuid
tools/perf/arch/x86/util/auxtrace.c: ret = get_cpuid(buffer, sizeof(buffer));
tools/perf/arch/x86/util/header.c:get_cpuid(char *buffer, size_t sz)
tools/perf/arch/powerpc/util/header.c:get_cpuid(char *buffer, size_t sz)
tools/perf/arch/s390/util/header.c: * Implementation of get_cpuid().
tools/perf/arch/s390/util/header.c:int get_cpuid(char *buffer, size_t sz)
tools/perf/arch/s390/util/header.c: if (buf && get_cpuid(buf, 128))
$
For 'report' or 'script', i.e. tools working on perf.data files, that is
setup while reading the header, its just top that needs to explicitely
read it at tool start.
Fixes: 608127f73779 ("perf top: Initialize perf_env->cpuid, needed by the per arch annotation init routine")
Reported-by: John Garry <john.garry@huawei.com>
Analysed-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: John Garry <john.garry@huawei.com> # arm64
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-lxwjr0cd2eggzx04a780ffrv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Some of the functions calling get_cpuid() propagate back the error it
returns, and all are using errno (positive) values, make the weak
default get_cpuid() function return ENOSYS to be consistent and to allow
checking if this is an arch not providing this function or if a provided
one is having trouble getting the cpuid, to decide if the warning should
be provided to the user or just a debug message should be emitted.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: John Garry <john.garry@huawei.com> # arm64
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-lxwjr0cd2eggzx04a780ffrv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
After original patch was merged there were additional comments/requests
provided by Rob Herring [1]. Mostly they are related to json-schema usage,
and this patch fixes them. Also SPDX-License-Identifier has been changed to
(GPL-2.0-only OR BSD-2-Clause) as requested.
[1] https://lkml.org/lkml/2019/11/21/875
Fixes: ef63fe72f698 ("dt-bindings: net: ti: add new cpsw switch driver bindings")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
[robh: Remove 2 more maxItems that aren't necessary]
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
If the optional wdg interrupt is defined, then this property
may be defined.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
spin_unlock_irqrestore() might be called with stale flags after
reading port status, possibly restoring interrupts to a incorrect
state.
If a usb2 port just finished resuming while the port status is read
the spin lock will be temporary released and re-acquired in a separate
function. The flags parameter is passed as value instead of a pointer,
not updating flags properly before the final spin_unlock_irqrestore()
is called.
Cc: <stable@vger.kernel.org> # v3.12+
Fixes: 8b3d45705e54 ("usb: Fix xHCI host issues on remote wakeup.")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191211142007.8847-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
xhci driver claims it needs XHCI_TRUST_TX_LENGTH quirk for both
Broadcom/Cavium and a Renesas xHC controllers.
The quirk was inteded for handling false "success" complete event for
transfers that had data left untransferred.
These transfers should complete with "short packet" events instead.
In these two new cases the false "success" completion is reported
after a "short packet" if the TD consists of several TRBs.
xHCI specs 4.10.1.1.2 say remaining TRBs should report "short packet"
as well after the first short packet in a TD, but this issue seems so
common it doesn't make sense to add the quirk for all vendors.
Turn these events into short packets automatically instead.
This gets rid of the "The WARN Successful completion on short TX for
slot 1 ep 1: needs XHCI_TRUST_TX_LENGTH quirk" warning in many cases.
Cc: <stable@vger.kernel.org>
Reported-by: Eli Billauer <eli.billauer@gmail.com>
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Eli Billauer <eli.billauer@gmail.com>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191211142007.8847-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
I've recently observed failed xHCI suspend attempt on AMD Raven Ridge
system:
kernel: xhci_hcd 0000:04:00.4: WARN: xHC CMD_RUN timeout
kernel: PM: suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110
kernel: PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110
kernel: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns -110
kernel: PM: Device 0000:04:00.4 failed to suspend async: error -110
Similar to commit ac343366846a ("xhci: Increase STS_SAVE timeout in
xhci_suspend()") we also need to increase the HALT timeout to make it be
able to suspend again.
Cc: <stable@vger.kernel.org> # 5.2+
Fixes: f7fac17ca925 ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191211142007.8847-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Xhci driver cannot call pci_set_power_state() on non-pci xhci host
controllers. For example, NVIDIA Tegra XHCI host controller which acts
as platform device with XHCI_SPURIOUS_WAKEUP quirk set in some platform
hits this issue during shutdown.
Cc: <stable@vger.kernel.org>
Fixes: 638298dc66ea ("xhci: Fix spurious wakeups after S5 on Haswell")
Signed-off-by: Henry Lin <henryl@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191211142007.8847-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A race in xhci USB3 remote wake handling may force device back to suspend
after it initiated resume siganaling, causing a missed resume event or warm
reset of device.
When a USB3 link completes resume signaling and goes to enabled (UO)
state a interrupt is issued and the interrupt handler will clear the
bus_state->port_remote_wakeup resume flag, allowing bus suspend.
If the USB3 roothub thread just finished reading port status before
the interrupt, finding ports still in suspended (U3) state, but hasn't
yet started suspending the hub, then the xhci interrupt handler will clear
the flag that prevented roothub suspend and allow bus to suspend, forcing
all port links back to suspended (U3) state.
Example case:
usb_runtime_suspend() # because all ports still show suspended U3
usb_suspend_both()
hub_suspend(); # successful as hub->wakeup_bits not set yet
==> INTERRUPT
xhci_irq()
handle_port_status()
clear bus_state->port_remote_wakeup
usb_wakeup_notification()
sets hub->wakeup_bits;
kick_hub_wq()
<== END INTERRUPT
hcd_bus_suspend()
xhci_bus_suspend() # success as port_remote_wakeup bits cleared
Fix this by increasing roothub usage count during port resume to prevent
roothub autosuspend, and by making sure bus_state->port_remote_wakeup
flag is only cleared after resume completion is visible, i.e.
after xhci roothub returned U0 or other non-U3 link state link on a
get port status request.
Issue rootcaused by Chiasheng Lee
Cc: <stable@vger.kernel.org>
Cc: Lee, Hou-hsun <hou-hsun.lee@intel.com>
Reported-by: Lee, Chiasheng <chiasheng.lee@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191211142007.8847-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When xHCI is part of Alpine or Titan Ridge Thunderbolt controller and
the xHCI device is hot-removed as a result of unplugging a dock for
example, the driver leaks memory it allocates for xhci->usb3_rhub.psi
and xhci->usb2_rhub.psi in xhci_add_in_port() as reported by kmemleak:
unreferenced object 0xffff922c24ef42f0 (size 16):
comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s)
hex dump (first 16 bytes):
21 00 0c 00 12 00 dc 05 23 00 e0 01 00 00 00 00 !.......#.......
backtrace:
[<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7
[<0000000001b6d775>] xhci_init+0x7c/0x160
[<00000000db443fe3>] xhci_gen_setup+0x214/0x340
[<00000000fdffd320>] xhci_pci_setup+0x48/0x110
[<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747
[<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4
[<0000000021043861>] xhci_pci_probe+0x24/0x1c0
[<00000000b9231f25>] local_pci_probe+0x3d/0x70
[<000000006385c9d7>] pci_device_probe+0xd0/0x150
[<0000000070241068>] really_probe+0xf5/0x3c0
[<0000000061f35c0a>] driver_probe_device+0x58/0x100
[<000000009da11198>] bus_for_each_drv+0x79/0xc0
[<000000009ce45f69>] __device_attach+0xda/0x160
[<00000000df201aaf>] pci_bus_add_device+0x46/0x70
[<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60
[<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60
unreferenced object 0xffff922c24ef3318 (size 8):
comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s)
hex dump (first 8 bytes):
34 01 05 00 35 41 0a 00 4...5A..
backtrace:
[<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7
[<0000000001b6d775>] xhci_init+0x7c/0x160
[<00000000db443fe3>] xhci_gen_setup+0x214/0x340
[<00000000fdffd320>] xhci_pci_setup+0x48/0x110
[<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747
[<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4
[<0000000021043861>] xhci_pci_probe+0x24/0x1c0
[<00000000b9231f25>] local_pci_probe+0x3d/0x70
[<000000006385c9d7>] pci_device_probe+0xd0/0x150
[<0000000070241068>] really_probe+0xf5/0x3c0
[<0000000061f35c0a>] driver_probe_device+0x58/0x100
[<000000009da11198>] bus_for_each_drv+0x79/0xc0
[<000000009ce45f69>] __device_attach+0xda/0x160
[<00000000df201aaf>] pci_bus_add_device+0x46/0x70
[<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60
[<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60
Fix this by calling kfree() for the both psi objects in
xhci_mem_cleanup().
Cc: <stable@vger.kernel.org> # 4.4+
Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191211142007.8847-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
USB: fixes for v5.5-rc2
Only four patches here this time around. Three of them are on dwc3
fixing some small bugs related to our 'started' flag.
None are major fixes but they're important nevertheless.
* tag 'fixes-for-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
usb: gadget: fix wrong endpoint desc
usb: dwc3: ep0: Clear started flag on completion
usb: dwc3: gadget: Clear started flag for non-IOC
usb: dwc3: gadget: Fix logical condition
|
|
Since retirement may be running in a worker on another CPU, it may be
skipped in the local intel_gt_wait_for_idle(). To ensure the state is
consistent for our sanity checks upon load, serialise with the remote
retirer by waiting on the timeline->mutex.
Outside of this use case, e.g. on suspend or module unload, we expect the
slack to be picked up by intel_gt_pm_wait_for_idle() and so prefer to
put the special case serialisation with retirement in its single user,
for now at least.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191121071044.97798-2-chris@chris-wilson.co.uk
(cherry picked from commit 2d0fb251360ab7eccbffd99f6933a2a4de678d52)
Fixes: 093b92287363 ("drm/i915: Split i915_active.mutex into an irq-safe spinlock for the rbtree")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/754
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
We managed to get confused about the shift direction at least once.
Let's switch to division/multiplcation instead. Add a number of pages
macro for this purpose. We still keep the order macro around too since
this is what alloc/free pages want.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
|
|
free_page_order is a confusing name. It's not a page order
actually, it's the order of the block of memory we are hinting.
Rename to hint_block_order. Also, rename SIZE to BYTES
to make it clear it's the block size in bytes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
|
|
In case we have to migrate a ballon page to a newpage of another zone, the
managed page count of both zones is wrong. Paired with memory offlining
(which will adjust the managed page count), we can trigger kernel crashes
and all kinds of different symptoms.
One way to reproduce:
1. Start a QEMU guest with 4GB, no NUMA
2. Hotplug a 1GB DIMM and online the memory to ZONE_NORMAL
3. Inflate the balloon to 1GB
4. Unplug the DIMM (be quick, otherwise unmovable data ends up on it)
5. Observe /proc/zoneinfo
Node 0, zone Normal
pages free 16810
min 24848885473806
low 18471592959183339
high 36918337032892872
spanned 262144
present 262144
managed 18446744073709533486
6. Do anything that requires some memory (e.g., inflate the balloon some
more). The OOM goes crazy and the system crashes
[ 238.324946] Out of memory: Killed process 537 (login) total-vm:27584kB, anon-rss:860kB, file-rss:0kB, shmem-rss:00
[ 238.338585] systemd invoked oom-killer: gfp_mask=0x100cca(GFP_HIGHUSER_MOVABLE), order=0, oom_score_adj=0
[ 238.339420] CPU: 0 PID: 1 Comm: systemd Tainted: G D W 5.4.0-next-20191204+ #75
[ 238.340139] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu4
[ 238.341121] Call Trace:
[ 238.341337] dump_stack+0x8f/0xd0
[ 238.341630] dump_header+0x61/0x5ea
[ 238.341942] oom_kill_process.cold+0xb/0x10
[ 238.342299] out_of_memory+0x24d/0x5a0
[ 238.342625] __alloc_pages_slowpath+0xd12/0x1020
[ 238.343024] __alloc_pages_nodemask+0x391/0x410
[ 238.343407] pagecache_get_page+0xc3/0x3a0
[ 238.343757] filemap_fault+0x804/0xc30
[ 238.344083] ? ext4_filemap_fault+0x28/0x42
[ 238.344444] ext4_filemap_fault+0x30/0x42
[ 238.344789] __do_fault+0x37/0x1a0
[ 238.345087] __handle_mm_fault+0x104d/0x1ab0
[ 238.345450] handle_mm_fault+0x169/0x360
[ 238.345790] do_user_addr_fault+0x20d/0x490
[ 238.346154] do_page_fault+0x31/0x210
[ 238.346468] async_page_fault+0x43/0x50
[ 238.346797] RIP: 0033:0x7f47eba4197e
[ 238.347110] Code: Bad RIP value.
[ 238.347387] RSP: 002b:00007ffd7c0c1890 EFLAGS: 00010293
[ 238.347834] RAX: 0000000000000002 RBX: 000055d196a20a20 RCX: 00007f47eba4197e
[ 238.348437] RDX: 0000000000000033 RSI: 00007ffd7c0c18c0 RDI: 0000000000000004
[ 238.349047] RBP: 00007ffd7c0c1c20 R08: 0000000000000000 R09: 0000000000000033
[ 238.349660] R10: 00000000ffffffff R11: 0000000000000293 R12: 0000000000000001
[ 238.350261] R13: ffffffffffffffff R14: 0000000000000000 R15: 00007ffd7c0c18c0
[ 238.350878] Mem-Info:
[ 238.351085] active_anon:3121 inactive_anon:51 isolated_anon:0
[ 238.351085] active_file:12 inactive_file:7 isolated_file:0
[ 238.351085] unevictable:0 dirty:0 writeback:0 unstable:0
[ 238.351085] slab_reclaimable:5565 slab_unreclaimable:10170
[ 238.351085] mapped:3 shmem:111 pagetables:155 bounce:0
[ 238.351085] free:720717 free_pcp:2 free_cma:0
[ 238.353757] Node 0 active_anon:12484kB inactive_anon:204kB active_file:48kB inactive_file:28kB unevictable:0kB iss
[ 238.355979] Node 0 DMA free:11556kB min:36kB low:48kB high:60kB reserved_highatomic:0KB active_anon:152kB inactivB
[ 238.358345] lowmem_reserve[]: 0 2955 2884 2884 2884
[ 238.358761] Node 0 DMA32 free:2677864kB min:7004kB low:10028kB high:13052kB reserved_highatomic:0KB active_anon:0B
[ 238.361202] lowmem_reserve[]: 0 0 72057594037927865 72057594037927865 72057594037927865
[ 238.361888] Node 0 Normal free:193448kB min:99395541895224kB low:73886371836733356kB high:147673348131571488kB reB
[ 238.364765] lowmem_reserve[]: 0 0 0 0 0
[ 238.365101] Node 0 DMA: 7*4kB (U) 5*8kB (UE) 6*16kB (UME) 2*32kB (UM) 1*64kB (U) 2*128kB (UE) 3*256kB (UME) 2*512B
[ 238.366379] Node 0 DMA32: 0*4kB 1*8kB (U) 2*16kB (UM) 2*32kB (UM) 2*64kB (UM) 1*128kB (U) 1*256kB (U) 1*512kB (U)B
[ 238.367654] Node 0 Normal: 1985*4kB (UME) 1321*8kB (UME) 844*16kB (UME) 524*32kB (UME) 300*64kB (UME) 138*128kB (B
[ 238.369184] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
[ 238.369915] 130 total pagecache pages
[ 238.370241] 0 pages in swap cache
[ 238.370533] Swap cache stats: add 0, delete 0, find 0/0
[ 238.370981] Free swap = 0kB
[ 238.371239] Total swap = 0kB
[ 238.371488] 1048445 pages RAM
[ 238.371756] 0 pages HighMem/MovableOnly
[ 238.372090] 306992 pages reserved
[ 238.372376] 0 pages cma reserved
[ 238.372661] 0 pages hwpoisoned
In another instance (older kernel), I was able to observe this
(negative page count :/):
[ 180.896971] Offlined Pages 32768
[ 182.667462] Offlined Pages 32768
[ 184.408117] Offlined Pages 32768
[ 186.026321] Offlined Pages 32768
[ 187.684861] Offlined Pages 32768
[ 189.227013] Offlined Pages 32768
[ 190.830303] Offlined Pages 32768
[ 190.833071] Built 1 zonelists, mobility grouping on. Total pages: -36920272750453009
In another instance (older kernel), I was no longer able to start any
process:
[root@vm ~]# [ 214.348068] Offlined Pages 32768
[ 215.973009] Offlined Pages 32768
cat /proc/meminfo
-bash: fork: Cannot allocate memory
[root@vm ~]# cat /proc/meminfo
-bash: fork: Cannot allocate memory
Fix it by properly adjusting the managed page count when migrating if
the zone changed. The managed page count of the zones now looks after
unplug of the DIMM (and after deflating the balloon) just like before
inflating the balloon (and plugging+onlining the DIMM).
We'll temporarily modify the totalram page count. If this ever becomes a
problem, we can fine tune by providing helpers that don't touch
the totalram pages (e.g., adjust_zone_managed_page_count()).
Please note that fixing up the managed page count is only necessary when
we adjusted the managed page count when inflating - only if we
don't have VIRTIO_BALLOON_F_DEFLATE_ON_OOM. With that feature, the
managed page count is not touched when inflating/deflating.
Reported-by: Yumei Huang <yuhuang@redhat.com>
Fixes: 3dcc0571cd64 ("mm: correctly update zone->managed_pages")
Cc: <stable@vger.kernel.org> # v3.11+
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
To pick up the changes from:
22945688acd4 ("KVM: PPC: Book3S HV: Support reset of secure guest")
No tools changes are caused by this, as the only defines so far used
from these files are for syscall arg pretty printing are:
$ grep KVM tools/perf/trace/beauty/*.sh
tools/perf/trace/beauty/kvm_ioctl.sh:regex='^#[[:space:]]*define[[:space:]]+KVM_(\w+)[[:space:]]+_IO[RW]*\([[:space:]]*KVMIO[[:space:]]*,[[:space:]]*(0x[[:xdigit:]]+).*'
$
This addresses these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Link: https://lkml.kernel.org/n/tip-bdbe4x02johhul05a03o27zj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up BPF fixes to allow a clean 'make -C tools/perf build-test':
7c3977d1e804 libbpf: Fix sym->st_value print on 32-bit arches
1fd450f99272 libbpf: Fix up generation of bpf_helper_defs.h
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When the kptr_restrict sysctl is set, the kernel can fail to return
jited_ksyms or jited_prog_insns, but still have positive values in
nr_jited_ksyms and jited_prog_len. This causes bpftool to crash when
trying to dump the program because it only checks the len fields not
the actual pointers to the instructions and ksyms.
Fix this by adding the missing checks.
Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Fixes: f84192ee00b7 ("tools: bpftool: resolve calls without using imm field")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191210181412.151226-1-toke@redhat.com
|
|
Building with -Werror showed another failure:
kernel/bpf/btf.c: In function 'btf_get_prog_ctx_type.isra.31':
kernel/bpf/btf.c:3508:63: error: array subscript 0 is above array bounds of 'u8[0]' {aka 'unsigned char[0]'} [-Werror=array-bounds]
ctx_type = btf_type_member(conv_struct) + bpf_ctx_convert_map[prog_type] * 2;
I don't actually understand why the array is empty, but a similar
fix has addressed a related problem, so I suppose we can do the
same thing here.
Fixes: ce27709b8162 ("bpf: Fix build in minimal configurations")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191210203553.2941035-1-arnd@arndb.de
|
|
All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls
limit at runtime. In addition, a test was recently added, in tailcalls2,
to check this limit.
This patch updates the tail call limit in MIPS' JIT compiler to allow
33 tail calls.
Fixes: b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.")
Reported-by: Mahshid Khezri <khezri.mahshid@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/b8eb2caac1c25453c539248e56ca22f74b5316af.1575916815.git.paul.chaignon@gmail.com
|
|
All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls
limit at runtime. In addition, a test was recently added, in tailcalls2,
to check this limit.
This patch updates the tail call limit in RISC-V's JIT compiler to allow
33 tail calls. I tested it using the above selftest on an emulated
RISCV64.
Fixes: 2353ecc6f91f ("bpf, riscv: add BPF JIT for RV64G")
Reported-by: Mahshid Khezri <khezri.mahshid@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/966fe384383bf23a0ee1efe8d7291c78a3fb832b.1575916815.git.paul.chaignon@gmail.com
|
|
The temperature sensor may jump backwards because there is a wrong
calibration value. Both values have to be monotonically increasing.
Fix it.
This was tested on a custom board.
Fixes: 571cebfe8e2b ("arm64: dts: ls1028a: Add Thermal Monitor Unit node")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Need to align with deactivate, should only use vgpu's lock for
active state setting instead of gvt lock.
Fixes: f25a49ab8ab9 ("drm/i915/gvt: Use vgpu_lock to protect per vgpu access")
Cc: Colin Xu <colin.xu@intel.com>
Reviewed-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20191202070109.73924-2-zhenyuw@linux.intel.com
|
|
Fix commit 7b81cb6bddd2 ("usb: add a HCD_DMA flag instead of
guestimating DMA capabilities") where local memory USB drivers
erroneously allocate DMA memory instead of pool memory, causing
OHCI Unrecoverable Error, disabled
HC died; cleaning up
The order between hcd_uses_dma() and hcd->localmem_pool is now
arranged as in hcd_buffer_alloc() and hcd_buffer_free(), with the
test for hcd->localmem_pool placed first.
As an alternative, one might consider adjusting hcd_uses_dma() with
static inline bool hcd_uses_dma(struct usb_hcd *hcd)
{
- return IS_ENABLED(CONFIG_HAS_DMA) && (hcd->driver->flags & HCD_DMA);
+ return IS_ENABLED(CONFIG_HAS_DMA) &&
+ (hcd->driver->flags & HCD_DMA) &&
+ (hcd->localmem_pool == NULL);
}
One can also consider unsetting HCD_DMA for local memory pool drivers.
Fixes: 7b81cb6bddd2 ("usb: add a HCD_DMA flag instead of guestimating DMA capabilities")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Link: https://lore.kernel.org/r/20191210172905.GA52526@sx9
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As a preparation for an API conversion, factor out something frequently
used in the media subsystem. As an improvement, it bails out on both,
NULL and ERRPTR to handle the old and new API.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
The usage of readl_poll_timeout is wrong, the 3rd parameter(cond)
should be "val & LOCK_STATUS" not "val & LOCK_TIMEOUT_US",
It is not check whether the pll locked, LOCK_STATUS reflects the mask,
not LOCK_TIMEOUT_US.
Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc")
Cc: <stable@vger.kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
