summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-12-09rxe: correctly calculate iCRC for unaligned payloadsSteve Wise
If RoCE PDUs being sent or received contain pad bytes, then the iCRC is miscalculated, resulting in PDUs being emitted by RXE with an incorrect iCRC, as well as ingress PDUs being dropped due to erroneously detecting a bad iCRC in the PDU. The fix is to include the pad bytes, if any, in iCRC computations. Note: This bug has caused broken on-the-wire compatibility with actual hardware RoCE devices since the soft-RoCE driver was first put into the mainstream kernel. Fixing it will create an incompatibility with the original soft-RoCE devices, but is necessary to be compatible with real hardware devices. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Steve Wise <larrystevenwise@gmail.com> Link: https://lore.kernel.org/r/20191203020319.15036-2-larrystevenwise@gmail.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-12-09Update mailmap info for Steve WiseSteve Wise
Signed-off-by: Steve Wise <larrystevenwise@gmail.com> Link: https://lore.kernel.org/r/20191203020319.15036-1-larrystevenwise@gmail.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-12-09spi: fsl: don't map irq during probeChristophe Leroy
With lastest kernel, the following warning is observed at startup: [ 1.500609] ------------[ cut here ]------------ [ 1.505225] remove_proc_entry: removing non-empty directory 'irq/22', leaking at least 'fsl_spi' [ 1.514234] WARNING: CPU: 0 PID: 1 at fs/proc/generic.c:682 remove_proc_entry+0x198/0x1c0 [ 1.522403] CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.0-s3k-dev-02248-g93532430a4ff #2564 [ 1.530724] NIP: c0197694 LR: c0197694 CTR: c0050d80 [ 1.535762] REGS: df4a5af0 TRAP: 0700 Not tainted (5.4.0-02248-g93532430a4ff) [ 1.543818] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 22028222 XER: 00000000 [ 1.550524] [ 1.550524] GPR00: c0197694 df4a5ba8 df4a0000 00000054 00000000 00000000 00004a38 00000010 [ 1.550524] GPR08: c07c5a30 00000800 00000000 00001032 22000208 00000000 c0004b14 00000000 [ 1.550524] GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c0830000 c07fc078 [ 1.550524] GPR24: c08e8ca0 df665d10 df60ea98 c07c9db8 00000001 df5d5ae3 df5d5a80 df43f8e3 [ 1.585327] NIP [c0197694] remove_proc_entry+0x198/0x1c0 [ 1.590628] LR [c0197694] remove_proc_entry+0x198/0x1c0 [ 1.595829] Call Trace: [ 1.598280] [df4a5ba8] [c0197694] remove_proc_entry+0x198/0x1c0 (unreliable) [ 1.605321] [df4a5bd8] [c0067acc] unregister_irq_proc+0x5c/0x70 [ 1.611238] [df4a5bf8] [c005fbc4] free_desc+0x3c/0x80 [ 1.616286] [df4a5c18] [c005fe2c] irq_free_descs+0x70/0xa8 [ 1.621778] [df4a5c38] [c033d3fc] of_fsl_spi_probe+0xdc/0x3cc [ 1.627525] [df4a5c88] [c02f0f64] platform_drv_probe+0x44/0xa4 [ 1.633350] [df4a5c98] [c02eee44] really_probe+0x1ac/0x418 [ 1.638829] [df4a5cc8] [c02ed3e8] bus_for_each_drv+0x64/0xb0 [ 1.644481] [df4a5cf8] [c02ef950] __device_attach+0xd4/0x128 [ 1.650132] [df4a5d28] [c02ed61c] bus_probe_device+0xa0/0xbc [ 1.655783] [df4a5d48] [c02ebbe8] device_add+0x544/0x74c [ 1.661096] [df4a5d88] [c0382b78] of_platform_device_create_pdata+0xa4/0x100 [ 1.668131] [df4a5da8] [c0382cf4] of_platform_bus_create+0x120/0x20c [ 1.674474] [df4a5df8] [c0382d50] of_platform_bus_create+0x17c/0x20c [ 1.680818] [df4a5e48] [c0382e88] of_platform_bus_probe+0x9c/0xf0 [ 1.686907] [df4a5e68] [c0751404] __machine_initcall_cmpcpro_cmpcpro_declare_of_platform_devices+0x74/0x1a4 [ 1.696629] [df4a5e98] [c072a4cc] do_one_initcall+0x8c/0x1d4 [ 1.702282] [df4a5ef8] [c072a768] kernel_init_freeable+0x154/0x204 [ 1.708455] [df4a5f28] [c0004b2c] kernel_init+0x18/0x110 [ 1.713769] [df4a5f38] [c00122ac] ret_from_kernel_thread+0x14/0x1c [ 1.719926] Instruction dump: [ 1.722889] 2c030000 4182004c 3863ffb0 3c80c05f 80e3005c 388436a0 3c60c06d 7fa6eb78 [ 1.730630] 7fe5fb78 38840280 38634178 4be8c611 <0fe00000> 4bffff6c 3c60c071 7fe4fb78 [ 1.738556] ---[ end trace 05d0720bf2e352e2 ]--- The problem comes from the error path which calls irq_dispose_mapping() while the IRQ has been requested with devm_request_irq(). IRQ doesn't need to be mapped with irq_of_parse_and_map(). The only need is to get the IRQ virtual number. For that, use of_irq_to_resource() instead of the irq_of_parse_and_map()/irq_dispose_mapping() pair. Fixes: 500a32abaf81 ("spi: fsl: Call irq_dispose_mapping in err path") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Link: https://lore.kernel.org/r/518cfb83347d5372748e7fe72f94e2e9443d0d4a.1575905123.git.christophe.leroy@c-s.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-09spi: spi-cavium-thunderx: Add missing pci_release_regions()Chuhong Yuan
The driver forgets to call pci_release_regions() in probe failure and remove. Add the missed calls to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191206075500.18525-1-hslester96@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-09regulator: core: avoid unneeded .list_voltage callsCristian Marussi
Inside machine_constraints_voltage() a loop is in charge of verifying that each of the defined voltages are within the configured constraints and that those constraints are in fact compatible with the available voltages' list. When the registered regulator happens to be defined with a wide range of possible voltages the above O(n) loop can be costly. Moreover since this behaviour is triggered during the registration process, it means also that it can be easily triggered at probe time, slowing down considerably some module loading. On the other side if such wide range of voltage values happens to be also continuous and without discontinuity of any kind, the above potentially cumbersome operation is also useless. For these reasons, avoid such .list_voltage poll loop when regulator is described as 'continuous_voltage_range' as is, indeed, similarly already done inside regulator_is_supported_voltage(). Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20191209125239.46054-1-cristian.marussi@arm.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-09treewide: Use sizeof_field() macroPankaj Bharadiya
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David Miller <davem@davemloft.net> # for net
2019-12-09MIPS: OCTEON: Replace SIZEOF_FIELD() macroPankaj Bharadiya
Switch to the standard sizeof_field() macro to find the size of a member of a struct and remove the custom SIZEOF_FIELD() macro. Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://lore.kernel.org/r/20190924105839.110713-4-pankaj.laxminarayan.bharadiya@intel.com Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2019-12-09net/x25: add new state X25_STATE_5Martin Schiller
This is needed, because if the flag X25_ACCPT_APPRV_FLAG is not set on a socket (manual call confirmation) and the channel is cleared by remote before the manual call confirmation was sent, this situation needs to be handled. Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09Documentation: kunit: add documentation for kunit_toolBrendan Higgins
Add documentation for the Python script used to build, run, and collect results from the kernel known as kunit_tool. kunit_tool (tools/testing/kunit/kunit.py) was already added in previous commits. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: David Gow <davidgow@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-12-09Documentation: kunit: fix typos and gramatical errorsBrendan Higgins
Fix typos and gramatical errors in the Getting Started and Usage guide for KUnit. Reported-by: Randy Dunlap <rdunlap@infradead.org> Link: https://patchwork.kernel.org/patch/11156481/ Reported-by: Rinat Ibragimov <ibragimovrinat@mail.ru> Link: https://github.com/google/kunit-docs/issues/1 Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: David Gow <davidgow@google.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-12-09kunit: testing kunit: Bug fix in test_run_timeout functionHeidi Fahim
Assert in test_run_timeout was not updated with the build_dir argument and caused the following error: AssertionError: Expected call: run_kernel(timeout=3453) Actual call: run_kernel(build_dir=None, timeout=3453) Needed to update kunit_tool_test to reflect this fix https://lkml.org/lkml/2019/9/6/351 Signed-off-by: Heidi Fahim <heidifahim@google.com> Reviewed-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Tested-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-12-09selftests: forwarding: Delete IPv6 address at the endIdo Schimmel
When creating the second host in h2_create(), two addresses are assigned to the interface, but only one is deleted. When running the test twice in a row the following error is observed: $ ./router_bridge_vlan.sh TEST: ping [ OK ] TEST: ping6 [ OK ] TEST: vlan [ OK ] $ ./router_bridge_vlan.sh RTNETLINK answers: File exists TEST: ping [ OK ] TEST: ping6 [ OK ] TEST: vlan [ OK ] Fix this by deleting the address during cleanup. Fixes: 5b1e7f9ebd56 ("selftests: forwarding: Test routed bridge interface") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09mlxsw: spectrum_router: Remove unlikely user-triggerable warningIdo Schimmel
In case the driver vetoes the addition of an IPv6 multipath route, the IPv6 stack will emit delete notifications for the sibling routes that were already added to the FIB trie. Since these siblings are not present in hardware, a warning will be generated. Have the driver ignore notifications for routes it does not have. Fixes: ebee3cad835f ("ipv6: Add IPv6 multipath notifications for add / replace") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09sctp: fully initialize v4 addr in some functionsXin Long
Syzbot found a crash: BUG: KMSAN: uninit-value in crc32_body lib/crc32.c:112 [inline] BUG: KMSAN: uninit-value in crc32_le_generic lib/crc32.c:179 [inline] BUG: KMSAN: uninit-value in __crc32c_le_base+0x4fa/0xd30 lib/crc32.c:202 Call Trace: crc32_body lib/crc32.c:112 [inline] crc32_le_generic lib/crc32.c:179 [inline] __crc32c_le_base+0x4fa/0xd30 lib/crc32.c:202 chksum_update+0xb2/0x110 crypto/crc32c_generic.c:90 crypto_shash_update+0x4c5/0x530 crypto/shash.c:107 crc32c+0x150/0x220 lib/libcrc32c.c:47 sctp_csum_update+0x89/0xa0 include/net/sctp/checksum.h:36 __skb_checksum+0x1297/0x12a0 net/core/skbuff.c:2640 sctp_compute_cksum include/net/sctp/checksum.h:59 [inline] sctp_packet_pack net/sctp/output.c:528 [inline] sctp_packet_transmit+0x40fb/0x4250 net/sctp/output.c:597 sctp_outq_flush_transports net/sctp/outqueue.c:1146 [inline] sctp_outq_flush+0x1823/0x5d80 net/sctp/outqueue.c:1194 sctp_outq_uncork+0xd0/0xf0 net/sctp/outqueue.c:757 sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1781 [inline] sctp_side_effects net/sctp/sm_sideeffect.c:1184 [inline] sctp_do_sm+0x8fe1/0x9720 net/sctp/sm_sideeffect.c:1155 sctp_primitive_REQUESTHEARTBEAT+0x175/0x1a0 net/sctp/primitive.c:185 sctp_apply_peer_addr_params+0x212/0x1d40 net/sctp/socket.c:2433 sctp_setsockopt_peer_addr_params net/sctp/socket.c:2686 [inline] sctp_setsockopt+0x189bb/0x19090 net/sctp/socket.c:4672 The issue was caused by transport->ipaddr set with uninit addr param, which was passed by: sctp_transport_init net/sctp/transport.c:47 [inline] sctp_transport_new+0x248/0xa00 net/sctp/transport.c:100 sctp_assoc_add_peer+0x5ba/0x2030 net/sctp/associola.c:611 sctp_process_param net/sctp/sm_make_chunk.c:2524 [inline] where 'addr' is set by sctp_v4_from_addr_param(), and it doesn't initialize the padding of addr->v4. Later when calling sctp_make_heartbeat(), hbinfo.daddr(=transport->ipaddr) will become the part of skb, and the issue occurs. This patch is to fix it by initializing the padding of addr->v4 in sctp_v4_from_addr_param(), as well as other functions that do the similar thing, and these functions shouldn't trust that the caller initializes the memory, as Marcelo suggested. Reported-by: syzbot+6dcbfea81cd3d4dd0b02@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09fs/ext4/inode-test: Fix inode test on 32 bit platforms.Iurii Zaikin
Fixes the issue caused by the fact that in C in the expression of the form -1234L only 1234L is the actual literal, the unary minus is an operation applied to the literal. Which means that to express the lower bound for the type one has to negate the upper bound and subtract 1. Original error: Expected test_data[i].expected.tv_sec == timestamp.tv_sec, but test_data[i].expected.tv_sec == -2147483648 timestamp.tv_sec == 2147483648 1901-12-13 Lower bound of 32bit < 0 timestamp, no extra bits: msb:1 lower_bound:1 extra_bits: 0 Expected test_data[i].expected.tv_sec == timestamp.tv_sec, but test_data[i].expected.tv_sec == 2147483648 timestamp.tv_sec == 6442450944 2038-01-19 Lower bound of 32bit <0 timestamp, lo extra sec bit on: msb:1 lower_bound:1 extra_bits: 1 Expected test_data[i].expected.tv_sec == timestamp.tv_sec, but test_data[i].expected.tv_sec == 6442450944 timestamp.tv_sec == 10737418240 2174-02-25 Lower bound of 32bit <0 timestamp, hi extra sec bit on: msb:1 lower_bound:1 extra_bits: 2 not ok 1 - inode_test_xtimestamp_decoding not ok 1 - ext4_inode_test Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Iurii Zaikin <yzaikin@google.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-12-09ARM: dts: Cygnus: Fix MDIO node address/size cellsFlorian Fainelli
The MDIO node on Cygnus had an reversed #address-cells and #size-cells properties, correct those. Fixes: 40c26d3af60a ("ARM: dts: Cygnus: Add the ethernet switch and ethernet PHY") Reported-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-12-09ARM: dts: bcm2711: fix soc's node dma-rangesNicolas Saenz Julienne
Raspberry Pi's firmware has a feature to select how much memory to reserve for its GPU called 'gpu_mem'. The possible values go from 16MB to 944MB, with a default of 64MB. This memory resides in the topmost part of the lower 1GB memory area and grows bigger expanding towards the begging of memory. It turns out that with low 'gpu_mem' values (16MB and 32MB) the size of the memory available to the system in the lower 1GB area can outgrow the interconnect's dma-range as its size was selected based on the maximum system memory available given the default gpu_mem configuration. This makes that memory slice unavailable for DMA. And may cause nasty kernel warnings if CMA happens to include it. Change soc's dma-ranges to really reflect it's HW limitation, which is being able to only DMA to the lower 1GB area. Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-12-09ARM: exynos_defconfig: Restore debugfs supportMarek Szyprowski
Commit 9f532d26c75c ("ARM: exynos_defconfig: Trim and reorganize with savedefconfig") removed explicit enable line for CONFIG_DEBUG_FS, because that feature has been selected by other enabled options: CONFIG_TRACING, which in turn had been selected by CONFIG_PERF_EVENTS and CONFIG_PROVE_LOCKING. In meantime, commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") removed the dependency between CONFIG_DEBUG_FS and CONFIG_TRACING, so CONFIG_DEBUG_FS is no longer enabled in default builds. Enable it again explicitly, as debugfs support is essential for various automated testing tools. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-12-09MAINTAINERS: Include Samsung SoC serial driver in Samsung SoC entryKrzysztof Kozlowski
Samsung SoC (S3C, S5P and Exynos) serial driver does not have dedicated reviewing person so some patches might be missed be Samsung-related folks (e.g. not even reaching Samsung SoC mailing list). Include them in generic Samsung SoC maintainer entry to provide some level of reviewing and care. This will not change handling of patches (via serial tree). Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-12-09lib: raid6: fix awk build warningsGreg Kroah-Hartman
Newer versions of awk spit out these fun warnings: awk: ../lib/raid6/unroll.awk:16: warning: regexp escape sequence `\#' is not a known regexp operator As commit 700c1018b86d ("x86/insn: Fix awk regexp warnings") showed, it turns out that there are a number of awk strings that do not need to be escaped and newer versions of awk now warn about this. Fix the string up so that no warning is produced. The exact same kernel module gets created before and after this patch, showing that it wasn't needed. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20191206152600.GA75093@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-09selftests: safesetid: Fix Makefile to set correct test programMasami Hiramatsu
Fix Makefile to set safesetid-test.sh to TEST_PROGS instead of non existing run_tests.sh. Without this fix, I got following error. ---- TAP version 13 1..1 # selftests: safesetid: run_tests.sh # Warning: file run_tests.sh is missing! not ok 1 selftests: safesetid: run_tests.sh ---- Fixes: c67e8ec03f3f ("LSM: SafeSetID: add selftest") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-12-09selftests: safesetid: Check the return value of setuid/setgidMasami Hiramatsu
Check the return value of setuid() and setgid(). This fixes the following warnings and improves test result. safesetid-test.c: In function ‘main’: safesetid-test.c:294:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result] setuid(NO_POLICY_USER); ^~~~~~~~~~~~~~~~~~~~~~ safesetid-test.c:295:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result] setgid(NO_POLICY_USER); ^~~~~~~~~~~~~~~~~~~~~~ safesetid-test.c:309:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result] setuid(RESTRICTED_PARENT); ^~~~~~~~~~~~~~~~~~~~~~~~~ safesetid-test.c:310:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result] setgid(RESTRICTED_PARENT); ^~~~~~~~~~~~~~~~~~~~~~~~~ safesetid-test.c: In function ‘test_setuid’: safesetid-test.c:216:3: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result] setuid(child_uid); ^~~~~~~~~~~~~~~~~ Fixes: c67e8ec03f3f ("LSM: SafeSetID: add selftest") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-12-09selftests: safesetid: Move link library to LDLIBSMasami Hiramatsu
Move -lcap to LDLIBS from CFLAGS because it is a library to be linked. Without this, safesetid failed to build with link error as below. ---- /usr/bin/ld: /tmp/ccL8rZHT.o: in function `drop_caps': safesetid-test.c:(.text+0xe7): undefined reference to `cap_get_proc' /usr/bin/ld: safesetid-test.c:(.text+0x107): undefined reference to `cap_set_flag' /usr/bin/ld: safesetid-test.c:(.text+0x10f): undefined reference to `cap_set_proc' /usr/bin/ld: safesetid-test.c:(.text+0x117): undefined reference to `cap_free' /usr/bin/ld: safesetid-test.c:(.text+0x136): undefined reference to `cap_clear' collect2: error: ld returned 1 exit status ---- Fixes: c67e8ec03f3f ("LSM: SafeSetID: add selftest") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-12-09selftests/ftrace: Fix multiple kprobe testcaseMasami Hiramatsu
Fix multiple kprobe event testcase to work it correctly. There are 2 bugfixes. - Since `wc -l FILE` returns not only line number but also FILE filename, following "if" statement always failed. Fix this bug by replacing it with 'cat FILE | wc -l' - Since "while do-done loop" block with pipeline becomes a subshell, $N local variable is not update outside of the loop. Fix this bug by using actual target number (256) instead of $N. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-12-09selftests/ftrace: Do not to use absolute debugfs pathMasami Hiramatsu
Use relative path to trigger file instead of absolute debugfs path, because if the user uses tracefs instead of debugfs, it can be mounted at /sys/kernel/tracing. Anyway, since the ftracetest is designed to be run at the tracing directory, user doesn't need to use absolute path. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-12-09selftests/ftrace: Fix ftrace test cases to check unsupportedMasami Hiramatsu
Since dynamic function tracer can be disabled, set_ftrace_filter can be disappeared. Test cases which depends on it, must check whether the set_ftrace_filter exists or not before testing and if not, return as unsupported. Also, if the function tracer itself is disabled, we can not set "function" to current_tracer. Test cases must check it before testing, and return as unsupported. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-12-09selftests/ftrace: Fix to check the existence of set_ftrace_filterMasami Hiramatsu
If we run ftracetest on the kernel with CONFIG_DYNAMIC_FTRACE=n, there is no set_ftrace_filter and all test cases are failed, because reset_ftrace_filter() returns an error. Let's check whether set_ftrace_filter exists in reset_ftrace_filter() and clean up only set_ftrace_notrace in initialize_ftrace(). Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-12-09MAINTAINERS: Update Lukasz Luba's email addressLukasz Luba
Update Lukasz Luba's email address to @arm.com in MAINTAINERS and map it correctly in .mailmap file. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-12-09bonding: fix bond_neigh_init()Eric Dumazet
1) syzbot reported an uninit-value in bond_neigh_setup() [1] bond_neigh_setup() uses a temporary on-stack 'struct neigh_parms parms', but only clears parms.neigh_setup field. A stacked bonding device would then enter bond_neigh_setup() and read garbage from parms->dev. If we get really unlucky and garbage is matching @dev, then we could recurse and eventually crash. Let's make sure the whole structure is cleared to avoid surprises. 2) bond_neigh_setup() can be called while another cpu manipulates the master device, removing or adding a slave. We need at least rcu protection to prevent use-after-free. Note: Prior code does not support a stack of bonding devices, this patch does not attempt to fix this, and leave a comment instead. [1] BUG: KMSAN: uninit-value in bond_neigh_setup+0xa4/0x110 drivers/net/bonding/bond_main.c:3655 CPU: 0 PID: 11256 Comm: syz-executor.0 Not tainted 5.4.0-rc8-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108 __msan_warning+0x57/0xa0 mm/kmsan/kmsan_instr.c:245 bond_neigh_setup+0xa4/0x110 drivers/net/bonding/bond_main.c:3655 bond_neigh_init+0x216/0x4b0 drivers/net/bonding/bond_main.c:3626 ___neigh_create+0x169e/0x2c40 net/core/neighbour.c:613 __neigh_create+0xbd/0xd0 net/core/neighbour.c:674 ip6_finish_output2+0x149a/0x2670 net/ipv6/ip6_output.c:113 __ip6_finish_output+0x83d/0x8f0 net/ipv6/ip6_output.c:142 ip6_finish_output+0x2db/0x420 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0x5d3/0x720 net/ipv6/ip6_output.c:175 dst_output include/net/dst.h:436 [inline] NF_HOOK include/linux/netfilter.h:305 [inline] mld_sendpack+0xebd/0x13d0 net/ipv6/mcast.c:1682 mld_send_cr net/ipv6/mcast.c:1978 [inline] mld_ifc_timer_expire+0x116b/0x1680 net/ipv6/mcast.c:2477 call_timer_fn+0x232/0x530 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers+0xd60/0x1270 kernel/time/timer.c:1773 run_timer_softirq+0x2d/0x50 kernel/time/timer.c:1786 __do_softirq+0x4a1/0x83a kernel/softirq.c:293 invoke_softirq kernel/softirq.c:375 [inline] irq_exit+0x230/0x280 kernel/softirq.c:416 exiting_irq+0xe/0x10 arch/x86/include/asm/apic.h:536 smp_apic_timer_interrupt+0x48/0x70 arch/x86/kernel/apic/apic.c:1138 apic_timer_interrupt+0x2e/0x40 arch/x86/entry/entry_64.S:835 </IRQ> RIP: 0010:kmsan_free_page+0x18d/0x1c0 mm/kmsan/kmsan_shadow.c:439 Code: 4c 89 ff 44 89 f6 e8 82 0d ee ff 65 ff 0d 9f 26 3b 60 65 8b 05 98 26 3b 60 85 c0 75 24 e8 5b f6 35 ff 4c 89 6d d0 ff 75 d0 9d <48> 83 c4 10 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 0f 0b 0f 0b 0f RSP: 0018:ffffb328034af818 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000000 RBX: ffffe2d7471f8360 RCX: 0000000000000000 RDX: ffffffffadea7000 RSI: 0000000000000004 RDI: ffff93496fcda104 RBP: ffffb328034af850 R08: ffff934a47e86d00 R09: ffff93496fc41900 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000000246 R14: 0000000000000000 R15: ffffe2d7472225c0 free_pages_prepare mm/page_alloc.c:1138 [inline] free_pcp_prepare mm/page_alloc.c:1230 [inline] free_unref_page_prepare+0x1d9/0x770 mm/page_alloc.c:3025 free_unref_page mm/page_alloc.c:3074 [inline] free_the_page mm/page_alloc.c:4832 [inline] __free_pages+0x154/0x230 mm/page_alloc.c:4840 __vunmap+0xdac/0xf20 mm/vmalloc.c:2277 __vfree mm/vmalloc.c:2325 [inline] vfree+0x7c/0x170 mm/vmalloc.c:2355 copy_entries_to_user net/ipv6/netfilter/ip6_tables.c:883 [inline] get_entries net/ipv6/netfilter/ip6_tables.c:1041 [inline] do_ip6t_get_ctl+0xfa4/0x1030 net/ipv6/netfilter/ip6_tables.c:1709 nf_sockopt net/netfilter/nf_sockopt.c:104 [inline] nf_getsockopt+0x481/0x4e0 net/netfilter/nf_sockopt.c:122 ipv6_getsockopt+0x264/0x510 net/ipv6/ipv6_sockglue.c:1400 tcp_getsockopt+0x1c6/0x1f0 net/ipv4/tcp.c:3688 sock_common_getsockopt+0x13f/0x180 net/core/sock.c:3110 __sys_getsockopt+0x533/0x7b0 net/socket.c:2129 __do_sys_getsockopt net/socket.c:2144 [inline] __se_sys_getsockopt+0xe1/0x100 net/socket.c:2141 __x64_sys_getsockopt+0x62/0x80 net/socket.c:2141 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45d20a Code: b8 34 01 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 8d 8b fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 6a 8b fb ff c3 66 0f 1f 84 00 00 00 00 00 RSP: 002b:0000000000a6f618 EFLAGS: 00000212 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 0000000000a6f640 RCX: 000000000045d20a RDX: 0000000000000041 RSI: 0000000000000029 RDI: 0000000000000003 RBP: 0000000000717cc0 R08: 0000000000a6f63c R09: 0000000000004000 R10: 0000000000a6f740 R11: 0000000000000212 R12: 0000000000000003 R13: 0000000000000000 R14: 0000000000000029 R15: 0000000000715b00 Local variable description: ----parms@bond_neigh_init Variable was created at: bond_neigh_init+0x8c/0x4b0 drivers/net/bonding/bond_main.c:3617 bond_neigh_init+0x8c/0x4b0 drivers/net/bonding/bond_main.c:3617 Fixes: 9918d5bf329d ("bonding: modify only neigh_parms owned by us") Fixes: 234bcf8a499e ("net/bonding: correctly proxy slave neigh param setup ndo function") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09neighbour: remove neigh_cleanup() methodEric Dumazet
neigh_cleanup() has not been used for seven years, and was a wrong design. Messing with shared pointer in bond_neigh_init() without proper memory barriers would at least trigger syzbot complains eventually. It is time to remove this stuff. Fixes: b63b70d87741 ("IPoIB: Use a private hash table for path lookup in xmit path") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09ARM: dts: BCM5301X: Fix MDIO node address/size cellsFlorian Fainelli
The MDIO node on BCM5301X had an reversed #address-cells and #size-cells properties, correct those, silencing checker warnings: .../linux/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected Reported-by: Simon Horman <simon.horman@netronome.com> Fixes: 23f1eca6d59b ("ARM: dts: BCM5301X: Specify MDIO bus in the DT") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-12-09Merge tag 'linux-can-fixes-for-5.5-20191208' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2019-12-08 this is a pull request of 13 patches for net/master. The first two patches are by Dan Murphy. He adds himself as a maintainer to the m-can MMIO and tcan SPI driver. The next two patches the j1939 stack. The first one is by Oleksij Rempel and fixes a locking problem found by the syzbot, the second one is by me an fixes a mistake in the documentation. Srinivas Neeli fixes missing RX CAN packets on CANFD2.0 in the xilinx driver. Sean Nyekjaer fixes a possible deadlock in the the flexcan driver after suspend/resume. Joakim Zhang contributes two patches for the flexcan driver that fix problems with the low power enter/exit. The next 4 patches all target the tcan part of the m_can driver. Sean Nyekjaer adds the required delay after reset and fixes the device tree binding example. Dan Murphy's patches make the wake-gpio optional. In the last patch Xiaolong Huang fixes several kernel memory info leaks to the USB device in the kvaser_usb_leaf driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09Merge tag 'vexpress-fixes-5.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes ARMv7 Vexpress fixes for v5.5 Switching the cpumask from topology core to OPP sharing, as the topology core cpumask can be modified during cpu hotplug to avoid setting up wrong cpufreq policy cpumask. * tag 'vexpress-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: cpufreq: vexpress-spc: Switch cpumask from topology core to OPP sharing ARM: vexpress: Set-up shared OPP table instead of individual for each CPU Link: https://lore.kernel.org/r/20191209140037.GC25155@bogus Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-09RDMA/cma: add missed unregister_pernet_subsys in init failureChuhong Yuan
The driver forgets to call unregister_pernet_subsys() in the error path of cma_init(). Add the missed call to fix it. Fixes: 4be74b42a6d0 ("IB/cma: Separate port allocation to network namespaces") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Link: https://lore.kernel.org/r/20191206012426.12744-1-hslester96@gmail.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-12-09btrfs: add Kconfig dependency for BLAKE2BDavid Sterba
Because the BLAKE2B code went through a different tree, it was not available at the time the btrfs part was merged. Now that the Kconfig symbol exists, add it to the list. Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-09afs: Fix SELinux setting security label on /afsDavid Howells
Make the AFS dynamic root superblock R/W so that SELinux can set the security label on it. Without this, upgrades to, say, the Fedora filesystem-afs RPM fail if afs is mounted on it because the SELinux label can't be (re-)applied. It might be better to make it possible to bypass the R/O check for LSM label application through setxattr. Fixes: 4d673da14533 ("afs: Support the AFS dynamic root") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> cc: selinux@vger.kernel.org cc: linux-security-module@vger.kernel.org
2019-12-09afs: Fix afs_find_server lookups for ipv4 peersMarc Dionne
afs_find_server tries to find a server that has an address that matches the transport address of an rxrpc peer. The code assumes that the transport address is always ipv6, with ipv4 represented as ipv4 mapped addresses, but that's not the case. If the transport family is AF_INET, srx->transport.sin6.sin6_addr.s6_addr32[] will be beyond the actual ipv4 address and will always be 0, and all ipv4 addresses will be seen as matching. As a result, the first ipv4 address seen on any server will be considered a match, and the server returned may be the wrong one. One of the consequences is that callbacks received over ipv4 will only be correctly applied for the server that happens to have the first ipv4 address on the fs_addresses4 list. Callbacks over ipv4 from all other servers are dropped, causing the client to serve stale data. This is fixed by looking at the transport family, and comparing ipv4 addresses based on a sockaddr_in structure rather than a sockaddr_in6. Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2019-12-09drm/i915/gt: Save irqstate around virtual_context_destroyChris Wilson
As virtual_context_destroy() may be called from a request signal, it may be called from inside an irq-off section, and so we need to do a full save/restore of the irq state rather than blindly re-enable irqs upon unlocking. <4> [110.024262] WARNING: inconsistent lock state <4> [110.024277] 5.4.0-rc8-CI-CI_DRM_7489+ #1 Tainted: G U <4> [110.024292] -------------------------------- <4> [110.024305] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. <4> [110.024323] kworker/0:0/5 [HC0[0]:SC0[0]:HE1:SE1] takes: <4> [110.024338] ffff88826a0c7a18 (&(&rq->lock)->rlock){?.-.}, at: i915_request_retire+0x221/0x930 [i915] <4> [110.024592] {IN-HARDIRQ-W} state was registered at: <4> [110.024612] lock_acquire+0xa7/0x1c0 <4> [110.024627] _raw_spin_lock_irqsave+0x33/0x50 <4> [110.024788] intel_engine_breadcrumbs_irq+0x38c/0x600 [i915] <4> [110.024808] irq_work_run_list+0x49/0x70 <4> [110.024824] irq_work_run+0x26/0x50 <4> [110.024839] smp_irq_work_interrupt+0x44/0x1e0 <4> [110.024855] irq_work_interrupt+0xf/0x20 <4> [110.024871] __do_softirq+0xb7/0x47f <4> [110.024885] irq_exit+0xba/0xc0 <4> [110.024898] do_IRQ+0x83/0x160 <4> [110.024910] ret_from_intr+0x0/0x1d <4> [110.024922] irq event stamp: 172864 <4> [110.024938] hardirqs last enabled at (172863): [<ffffffff819ea214>] _raw_spin_unlock_irq+0x24/0x50 <4> [110.024963] hardirqs last disabled at (172864): [<ffffffff819e9fba>] _raw_spin_lock_irq+0xa/0x40 <4> [110.024988] softirqs last enabled at (172812): [<ffffffff81c00385>] __do_softirq+0x385/0x47f <4> [110.025012] softirqs last disabled at (172797): [<ffffffff810b829a>] irq_exit+0xba/0xc0 <4> [110.025031] other info that might help us debug this: <4> [110.025049] Possible unsafe locking scenario: <4> [110.025065] CPU0 <4> [110.025075] ---- <4> [110.025084] lock(&(&rq->lock)->rlock); <4> [110.025099] <Interrupt> <4> [110.025109] lock(&(&rq->lock)->rlock); <4> [110.025124] *** DEADLOCK *** <4> [110.025144] 4 locks held by kworker/0:0/5: <4> [110.025156] #0: ffff88827588f528 ((wq_completion)events){+.+.}, at: process_one_work+0x1de/0x620 <4> [110.025187] #1: ffffc9000006fe78 ((work_completion)(&engine->retire_work)){+.+.}, at: process_one_work+0x1de/0x620 <4> [110.025219] #2: ffff88825605e270 (&kernel#2){+.+.}, at: engine_retire+0x57/0xe0 [i915] <4> [110.025405] #3: ffff88826a0c7a18 (&(&rq->lock)->rlock){?.-.}, at: i915_request_retire+0x221/0x930 [i915] <4> [110.025634] stack backtrace: <4> [110.025653] CPU: 0 PID: 5 Comm: kworker/0:0 Tainted: G U 5.4.0-rc8-CI-CI_DRM_7489+ #1 <4> [110.025675] Hardware name: /NUC7i5BNB, BIOS BNKBL357.86A.0054.2017.1025.1822 10/25/2017 <4> [110.025856] Workqueue: events engine_retire [i915] <4> [110.025872] Call Trace: <4> [110.025891] dump_stack+0x71/0x9b <4> [110.025907] mark_lock+0x49a/0x500 <4> [110.025926] ? print_shortest_lock_dependencies+0x200/0x200 <4> [110.025946] mark_held_locks+0x49/0x70 <4> [110.025962] ? _raw_spin_unlock_irq+0x24/0x50 <4> [110.025978] lockdep_hardirqs_on+0xa2/0x1c0 <4> [110.025995] _raw_spin_unlock_irq+0x24/0x50 <4> [110.026171] virtual_context_destroy+0xc5/0x2e0 [i915] <4> [110.026376] __active_retire+0xb4/0x290 [i915] <4> [110.026396] dma_fence_signal_locked+0x9e/0x1b0 <4> [110.026613] i915_request_retire+0x451/0x930 [i915] <4> [110.026766] retire_requests+0x4d/0x60 [i915] <4> [110.026919] engine_retire+0x63/0xe0 [i915] Fixes: b1e3177bd1d8 ("drm/i915: Coordinate i915_active with its own mutex") Fixes: 6d06779e8672 ("drm/i915: Load balancing across a virtual engine") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191205145934.663183-1-chris@chris-wilson.co.uk (cherry picked from commit 6f7ac8285371fb0df58aba861eaab387f79ed04d) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-12-09netfilter: bridge: make sure to pull arp header in br_nf_forward_arp()Eric Dumazet
syzbot is kind enough to remind us we need to call skb_may_pull() BUG: KMSAN: uninit-value in br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665 CPU: 1 PID: 11631 Comm: syz-executor.1 Not tainted 5.4.0-rc8-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108 __msan_warning+0x64/0xc0 mm/kmsan/kmsan_instr.c:245 br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665 nf_hook_entry_hookfn include/linux/netfilter.h:135 [inline] nf_hook_slow+0x18b/0x3f0 net/netfilter/core.c:512 nf_hook include/linux/netfilter.h:260 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] __br_forward+0x78f/0xe30 net/bridge/br_forward.c:109 br_flood+0xef0/0xfe0 net/bridge/br_forward.c:234 br_handle_frame_finish+0x1a77/0x1c20 net/bridge/br_input.c:162 nf_hook_bridge_pre net/bridge/br_input.c:245 [inline] br_handle_frame+0xfb6/0x1eb0 net/bridge/br_input.c:348 __netif_receive_skb_core+0x20b9/0x51a0 net/core/dev.c:4830 __netif_receive_skb_one_core net/core/dev.c:4927 [inline] __netif_receive_skb net/core/dev.c:5043 [inline] process_backlog+0x610/0x13c0 net/core/dev.c:5874 napi_poll net/core/dev.c:6311 [inline] net_rx_action+0x7a6/0x1aa0 net/core/dev.c:6379 __do_softirq+0x4a1/0x83a kernel/softirq.c:293 do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1091 </IRQ> do_softirq kernel/softirq.c:338 [inline] __local_bh_enable_ip+0x184/0x1d0 kernel/softirq.c:190 local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32 rcu_read_unlock_bh include/linux/rcupdate.h:688 [inline] __dev_queue_xmit+0x38e8/0x4200 net/core/dev.c:3819 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3825 packet_snd net/packet/af_packet.c:2959 [inline] packet_sendmsg+0x8234/0x9100 net/packet/af_packet.c:2984 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg net/socket.c:657 [inline] __sys_sendto+0xc44/0xc70 net/socket.c:1952 __do_sys_sendto net/socket.c:1964 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1960 __x64_sys_sendto+0x6e/0x90 net/socket.c:1960 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45a679 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f0a3c9e5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 000000000045a679 RDX: 000000000000000e RSI: 0000000020000200 RDI: 0000000000000003 RBP: 000000000075bf20 R08: 00000000200000c0 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f0a3c9e66d4 R13: 00000000004c8ec1 R14: 00000000004dfe28 R15: 00000000ffffffff Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline] kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132 kmsan_slab_alloc+0x97/0x100 mm/kmsan/kmsan_hooks.c:86 slab_alloc_node mm/slub.c:2773 [inline] __kmalloc_node_track_caller+0xe27/0x11a0 mm/slub.c:4381 __kmalloc_reserve net/core/skbuff.c:141 [inline] __alloc_skb+0x306/0xa10 net/core/skbuff.c:209 alloc_skb include/linux/skbuff.h:1049 [inline] alloc_skb_with_frags+0x18c/0xa80 net/core/skbuff.c:5662 sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2244 packet_alloc_skb net/packet/af_packet.c:2807 [inline] packet_snd net/packet/af_packet.c:2902 [inline] packet_sendmsg+0x63a6/0x9100 net/packet/af_packet.c:2984 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg net/socket.c:657 [inline] __sys_sendto+0xc44/0xc70 net/socket.c:1952 __do_sys_sendto net/socket.c:1964 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1960 __x64_sys_sendto+0x6e/0x90 net/socket.c:1960 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c4e70a87d975 ("netfilter: bridge: rename br_netfilter.c to br_netfilter_hooks.c") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-12-09netfilter: nf_tables_offload: return EOPNOTSUPP if rule specifies no actionsPablo Neira Ayuso
If the rule only specifies the matching side, return EOPNOTSUPP. Otherwise, the front-end relies on the drivers to reject this rule. Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-12-09netfilter: nf_tables: skip module reference count bump on object updatesPablo Neira Ayuso
Use __nft_obj_type_get() instead, otherwise there is a module reference counter leak. Fixes: d62d0ba97b58 ("netfilter: nf_tables: Introduce stateful object update operation") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-12-09netfilter: nf_tables: validate NFT_DATA_VALUE after nft_data_init()Pablo Neira Ayuso
Userspace might bogusly sent NFT_DATA_VERDICT in several netlink attributes that assume NFT_DATA_VALUE. Moreover, make sure that error path invokes nft_data_release() to decrement the reference count on the chain object. Fixes: 96518518cc41 ("netfilter: add nftables") Fixes: 0f3cd9b36977 ("netfilter: nf_tables: add range expression") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-12-09netfilter: nf_tables: validate NFT_SET_ELEM_INTERVAL_ENDPablo Neira Ayuso
Only NFTA_SET_ELEM_KEY and NFTA_SET_ELEM_FLAGS make sense for elements whose NFT_SET_ELEM_INTERVAL_END flag is set on. Fixes: 96518518cc41 ("netfilter: add nftables") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-12-09netfilter: nft_set_rbtree: bogus lookup/get on consecutive elements in named ↵Pablo Neira Ayuso
sets The existing rbtree implementation might store consecutive elements where the closing element and the opening element might overlap, eg. [ a, a+1) [ a+1, a+2) This patch removes the optimization for non-anonymous sets in the exact matching case, where it is assumed to stop searching in case that the closing element is found. Instead, invalidate candidate interval and keep looking further in the tree. The lookup/get operation might return false, while there is an element in the rbtree. Moreover, the get operation returns true as if a+2 would be in the tree. This happens with named sets after several set updates. The existing lookup optimization (that only works for the anonymous sets) might not reach the opening [ a+1,... element if the closing ...,a+1) is found in first place when walking over the rbtree. Hence, walking the full tree in that case is needed. This patch fixes the lookup and get operations. Fixes: e701001e7cbe ("netfilter: nft_rbtree: allow adjacent intervals with dynamic updates") Fixes: ba0e4d9917b4 ("netfilter: nf_tables: get set elements via netlink") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-12-09netfilter: uapi: Avoid undefined left-shift in xt_sctp.hPhil Sutter
With 'bytes(__u32)' being 32, a left-shift of 31 may happen which is undefined for the signed 32-bit value 1. Avoid this by declaring 1 as unsigned. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-12-09cpufreq: vexpress-spc: Switch cpumask from topology core to OPP sharingSudeep Holla
Since commit ca74b316df96 ("arm: Use common cpu_topology structure and functions.") the core cpumask has to be modified during cpu hotplug operations. So using them to set up cpufreq policy cpumask may be incorrect as it may contain only cpus that are online at that instance. Instead, we can use the cpumask setup by OPP library that contains all the cpus sharing OPP table using dev_pm_opp_get_sharing_cpus. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2019-12-09ARM: vexpress: Set-up shared OPP table instead of individual for each CPUSudeep Holla
Currently we add individual copy of same OPP table for each CPU within the cluster. This is redundant and doesn't reflect the reality. We can't use core cpumask to set policy->cpus in ve_spc_cpufreq_init() anymore as it gets called via cpuhp_cpufreq_online()->cpufreq_online() ->cpufreq_driver->init() and the cpumask gets updated upon CPU hotplug operations. It also may cause issues when the vexpress_spc_cpufreq driver is built as a module. Since ve_spc_clk_init is built-in device initcall, we should be able to use the same topology_core_cpumask to set the opp sharing cpumask via dev_pm_opp_set_sharing_cpus and use the same later in the driver via dev_pm_opp_get_sharing_cpus. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2019-12-09pinctrl: cherryview: Pass irqchip when adding gpiochipHans de Goede
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For more info see drivers/gpio/TODO. For chained irqchips this is a pretty straight-forward conversion. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-12-09pinctrl: cherryview: Add GPIO <-> pin mapping ranges via callbackHans de Goede
When IRQ chip is instantiated via GPIO library flow, the few functions, in particular the ACPI event registration mechanism, on some of ACPI based platforms expect that the pin ranges are initialized to that point. Add GPIO <-> pin mapping ranges via callback in the GPIO library flow. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-12-09pinctrl: cherryview: Split out irq hw-init into a separate helper functionHans de Goede
Split out irq hw-init into a separate chv_gpio_irq_init_hw() function. This is a preparation patch for passing the irqchip when adding the gpiochip. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-13 23:38:32 +0000