summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-17ALSA: hda/realtek - Use alc_codec_rename()Takashi Iwai
Replaced with alc_codec_rename() in all possible places. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17ALSA: hda - ALC888S-VC remark to ALC886Kailang Yang
Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17nfsd4: clean up open owners on OPEN failureJ. Bruce Fields
If process_open1() creates a new open owner, but the open later fails, the current code will leave the open owner around. It won't be on the close_lru list, and the client isn't expected to send a CLOSE, so it will hang around as long as the client does. Similarly, if process_open1() removes an existing open owner from the close lru, anticipating that an open owner that previously had no associated stateid's now will, but the open subsequently fails, then we'll again be left with the same leak. Fix both problems. Reported-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-17nfsd4: simplify process_open1 logicJ. Bruce Fields
No change in behavior. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-17nfsd4: make is_open_owner booleanJ. Bruce Fields
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-17nfsd4: centralize renew_client() callsJ. Bruce Fields
There doesn't seem to be any harm to renewing the client a bit earlier, when it is looked up. That saves us from having to sprinkle renew_client calls over quite so many places. Also remove a redundant comment and do a little cleanup. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-17Merge branch 'master' of ↵Alex Elder
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux Resolved conflicts: fs/xfs/xfs_trans_priv.h: - deleted struct xfs_ail field xa_flags - kept field xa_log_flush in struct xfs_ail fs/xfs/xfs_trans_ail.c: - in xfsaild_push(), in XFS_ITEM_PUSHBUF case, replaced "flush_log = 1" with "ailp->xa_log_flush++" Signed-off-by: Alex Elder <aelder@sgi.com>
2011-10-17Merge branch 'perf/core' of git://github.com/acmel/linux into perf/coreIngo Molnar
2011-10-17Merge branch 'master' of ↵John W. Linville
git://git.infradead.org/users/linville/wireless-next into for-davem
2011-10-17Merge branch 'tip/perf/core' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core
2011-10-17Avoid using variable-length arrays in kernel/sys.cLinus Torvalds
The size is always valid, but variable-length arrays generate worse code for no good reason (unless the function happens to be inlined and the compiler sees the length for the simple constant it is). Also, there seems to be some code generation problem on POWER, where Henrik Bakken reports that register r28 can get corrupted under some subtle circumstances (interrupt happening at the wrong time?). That all indicates some seriously broken compiler issues, but since variable length arrays are bad regardless, there's little point in trying to chase it down. "Just don't do that, then". Reported-by: Henrik Grindal Bakken <henribak@cisco.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-17MAINTAINERS: linux-m32r is moderated for non-subscribersPaul Bolle
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-17HID: primax: remove spurious dependencyJiri Kosina
Remove Kconfig dependency for hid-primax driver on CONFIG_EXPERT. Please see changelog of 73d5e8f77e8 ("HID: fix up 'EMBEDDED' mess in Kconfig") for reasoning behind this. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-17HID: support primax keyboards violating USB HID specTerry Lambert
Primax keyboards with the issue this driver addresses report modifier keys as in band key events instead of as out of band modifier bits, resulting in the modifier keys generating key up events immediately before the keys they are intended to modify. This driver rewrites the raw report data from such keyboards into USB HID 1.11 compliant report data. It only matches the USB vendor and product IDs for the keyboard it has been tested on. Since there are several keyboards, notably a number of laptops and folding USB keyboards known to have similar unresolved problem reports, the list is expected to grow. Signed-off-by: Terry Lambert <tlambert@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-17linux@lists.openrisc.net is moderated for non-subscribersPaul Bolle
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-17cifs: Call id to SID mapping functions to change owner/group (try #4 repost)Shirish Pargaonkar
Now build security descriptor to change either owner or group at the server. Initially security descriptor was built to change only (D)ACL, that functionality has been extended. When either an Owner or a Group of a file object at the server is changed, rest of security descriptor remains same (DACL etc.). To set security descriptor, it is necessary to open that file with permission bits of either WRITE_DAC if DACL is being modified or WRITE_OWNER (Take Ownership) if Owner or Group is being changed. It is the server that decides whether a set security descriptor with either owner or group change succeeds or not. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-17ALSA: hda/realtek - Check the error from alc_codec_rename()Takashi Iwai
Should be a rare case, but... Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17nfsd4: typo logical vs bitwise negateDan Carpenter
This should be a bitwise negate here. It silences a Sparse warning: fs/nfsd/nfs4xdr.c:693:16: warning: dubious: x & !y Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-17ARM: Add a few machine types to mach-typesRussell King
Add vision_ep9307, rwi_ews, usb_a9g20, karo, apf9328, tx37, tx25, tx51, mx51_m2id, pca101, gplugd, smdk4212 and smdk4412. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ixgbe: allow eeprom writes via ethtoolEmil Tantilov
Implement support for ethtool -E Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-17ixgbe: fix endianess when writing driver version to firmwareEmil Tantilov
This patch makes sure that register writes are in little endian and also converts the reads back to big-endian. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-17igb: Check if subordinate VFs are assigned to virtual machinesGreg Rose
Kvm and the Xen pci-back driver will set a flag in the virtual function pci device dev_flags when the VF is assigned to a guest VM. Before destroying subordinate VFs check to see if the flag is set and if so skip the call to pci_disable_sriov() to avoid system crashes. Copy the maintainer for the Xen pci-back driver. Also CC'ing maintainers of all drivers found to call pci_disable_sriov(). V2 - Fix uninitialized variable warning Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Christian Benvenuti <benve@cisco.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Dimitris Michailidis <dm@chelsio.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: James Smart <james.smart@emulex.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-17igbvf: Fix trunk vlanGreg Rose
Changes to clean up the VLAN Rx path by Jiri Pirko broke trunk VLAN. Trunk VLANs in a VF driver are those set using "ip link set <pfdev> vf <n> <vlanid>" Signed-off-by: Greg Rose <gregory.v.rose@intel.com> CC: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-17perf hists browser: Add missing stdarg.h includeMike Galbraith
CC util/ui/browsers/annotate.o In file included from util/ui/browsers/annotate.c:2:0: util/ui/browsers/../helpline.h:9:42: error: expected declaration specifiers or ‘...’ before ‘va_list’ CC util/ui/browsers/hists.o make: *** [util/ui/browsers/annotate.o] Error 1 make: *** Waiting for unfinished jobs.... Signed-off-by: Mike Galbraith <efault@gmx.de> Link: http://lkml.kernel.org/n/tip-9vefl2807smi7t4luhs00tg6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-10-17perf top: Fix the 'E' hotkey, select among multiple eventsArnaldo Carvalho de Melo
We were not recognizing 'E' as a hotkey due to a bug introduced when switching to the new, hist_entry based top. Fix it by returning that 'E' is mapped if evlist->nr_entries > 1. Reported-by: Mike Galbraith <efault@gmx.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-zcx055vnhagddvqlaqxvdhtb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-10-17perf top: Honour --hide_{user,kernel}_symbols and the 'U' hotkeyArnaldo Carvalho de Melo
The new decay routine (__hists__decay_entries) wasn't being passed the toggles, fix it. Reported-by: Mike Galbraith <efault@gmx.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-hg6m0mi1colket982oq9hhly@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-10-17genirq: Add IRQF_RESUME_EARLY and resume such IRQs earlierIan Campbell
This adds a mechanism to resume selected IRQs during syscore_resume instead of dpm_resume_noirq. Under Xen we need to resume IRQs associated with IPIs early enough that the resched IPI is unmasked and we can therefore schedule ourselves out of the stop_machine where the suspend/resume takes place. This issue was introduced by 676dc3cf5bc3 "xen: Use IRQF_FORCE_RESUME". Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Jeremy Fitzhardinge <Jeremy.Fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Link: http://lkml.kernel.org/r/1318713254.11016.52.camel@dagon.hellion.org.uk Cc: stable@kernel.org (at least to 2.6.32.y) Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-10-17ARM: 7130/1: dev_archdata: add private iommu extensionOhad Ben-Cohen
Add a private iommu pointer to the ARM-specific arch data in the device struct, which will be used to attach iommu-specific data to devices which require iommu support. Different iommu implementations (on different platforms) will attach different types of data to this pointer, so 'void *' is currently used (the downside is reduced typesafety). Note: ia64, x86 and sparc have this exact iommu extension as well, and if others are likely to adopt it too, we might want to consider adding this to the device struct itself directly. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7125/1: Add unwinding annotations for 64bit division functionsLaura Abbott
The 64bit division functions never had unwinding annotations added. This prevents a backtrace from being printed within the function and if a division by 0 occurs. Add the annotations. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7120/1: remove bashism in check for multiple zreladdrsRabin Vincent
Get rid of this complaint from dash: AS arch/arm/boot/compressed/lib1funcs.o /bin/sh: 1: [: y: unexpected operator LD arch/arm/boot/compressed/vmlinux Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7118/1: rename temp variable in read*_relaxed()Olof Johansson
This resolves the following sparse warning from readl() and other macros, which ends up embedding readl_relaxed() using the same variable. arch/arm/mach-tegra/dma.c:169:8: warning: symbol '__v' shadows an earlier one arch/arm/mach-tegra/dma.c:169:8: originally declared here Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 6217/4: mach-realview: expose PB1176 ROM using physmap and map_romLinus Walleij
This exposes the PB1176 ROM if you compile in the MTD physmap mapping and also the map_rom chiptype. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7098/1: kdump: copy kernel relocation code at the kexec prepare stageLei Wen
This copy really don't need to do at the very second before the kernel would crash. Signed-off-by: Lei Wen <leiwen@marvell.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7062/1: cache: detect PIPT I-cache using CTRWill Deacon
The Cache Type Register L1Ip field identifies I-caches with a PIPT policy using the encoding 11b. This patch extends the cache policy parsing to identify PIPT I-caches correctly and prevent them from being treated as VIPT aliasing in cases where they are sufficiently large. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: platform fixups: remove mdesc argument to fixup functionRussell King
Get rid of the mdesc pointer in the fixup function call. No one uses the mdesc pointer, it shouldn't be modified anyway, and we can't wrap it, so let's remove it. Platform files found by: $ regexp=$(git grep -h '\.fixup.*=' arch/arm | sed 's!.*= *\([^,]*\),* *!\1!' | sort -u | tr '\n' '|' | sed 's,|$,,;s,|,\\|,g') $ git grep $regexp arch/arm Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7017/1: Use generic BUG() handlerSimon Glass
ARM uses its own BUG() handler which makes its output slightly different from other archtectures. One of the problems is that the ARM implementation doesn't report the function with the BUG() in it, but always reports the PC being in __bug(). The generic implementation doesn't have this problem. Currently we get something like: kernel BUG at fs/proc/breakme.c:35! Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... PC is at __bug+0x20/0x2c With this patch it displays: kernel BUG at fs/proc/breakme.c:35! Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP ... PC is at write_breakme+0xd0/0x1b4 This implementation uses an undefined instruction to implement BUG, and sets up a bug table containing the relevant information. Many versions of gcc do not support %c properly for ARM (inserting a # when they shouldn't) so we work around this using distasteful macro magic. v1: Initial version to replace existing ARM BUG() implementation with something more similar to other architectures. v2: Add Thumb support, remove backtrace whitespace output changes. Change to use macros instead of requiring the asm %d flag to work (thanks to Dave Martin <dave.martin@linaro.org>) v3: Remove old BUG() implementation in favor of this one. Remove the Backtrace: message (will submit this separately). Use ARM_EXIT_KEEP() so that some architectures can dump exit text at link time thanks to Stephen Boyd <sboyd@codeaurora.org> (although since we always define GENERIC_BUG this might be academic.) Rebase to linux-2.6.git master. v4: Allow BUGS in modules (these were not reported correctly in v3) (thanks to Stephen Boyd <sboyd@codeaurora.org> for suggesting that.) Remove __bug() as this is no longer needed. v5: Add %progbits as the section flags. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7102/1: mach-integrator: update defconfigLinus Walleij
Update the Integrator defconfig with some sensible defaults: - Compile a combined image supporting Integrator/AP and Integrator/CP, with the core modules CM720, CM920, CM922, CM926, CM1020, CM1022 and CM1026 in a single image, this works just fine and gives some nice compilation coverage - NOHZ (tickless) and HRTIMERS turned on - Compile using EABI, let's assume recent compilers are used now (tested using GCC 4.4.1) - Remove forced 32MiB at command line, the bootloader usually knows this better, and my U-Boot patches nowadays make that boot loader pass the correct adjusted value - Enable the MTD Physmap flash driver, so that the changes done earlier by Marc Zyngier replacing integrator-flash takes effect - Enable the PL030 RTC driver that has not been default-compiled with any config for a while This has been tested on the real hardware Integrator AP with both an ARM920T and ARM926EJ-S core module. Cc: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7087/2: mach-integrator: get timer frequency from clockLinus Walleij
We already have a clock definition for the 24MHz clock in the Integrator, use that instead of some unclear defines from the platform.h header. Also delete the senseless comment that the file shouldn't be edited, I just edited it and the world didn't come to an end, so it's obviously false. If anyone still has the mentioned ".s file" and the s2h awk script generating that header, raise your hand (and give me your files). Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7086/2: mach-integrator: modernize clock event registrationLinus Walleij
Drop mult, shift and delta calculations and let the clockevent core scale this as appropriate. Set the minimum interval to 1 rather than 15 (0xf), there is nothing in the data sheets I have indicating that 15 should be some minimum value. Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7085/2: mach-integrator: clockevent supports oneshot modeLinus Walleij
The Integrator AP timer has no problem supporting oneshot ticks with proper code, so let's do it so we can have NOHZ configured in for this platform too. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7084/1: mach-integrator: retire some timer macrosLinus Walleij
These macros are not used by anything since the switch to generic time in commit b9cedda230793cbf58eb012ddadedd490cc8e129 so let's retire them. Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7078/1: Footbridge: Sort KConfig Options alphabeticallyPeter Hüwe
As per request of rmk, the options should be sorted alphabetically. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7026/1: simpad: replace ARM specific LED codeJochen Friedrich
Remove the legacy ARM LED code for simpad devices and register a stadard LED platform device using GPIO line instead. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7025/1: simpad: add GPIO based device definitions.Jochen Friedrich
Register keyboard, polled keyboard and I2C platform devices based on GPIOs. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7024/1: simpad: Cleanup CS3 accessors.Jochen Friedrich
- prepend CS3 accessors by simpad_ to indicate they are specific to simpad devices. - use spinlock to protect shadow register. - implement 8 read-only pins. - use readl/writel macros so barriers are used where necessary. - register CS3 as GPIO controller with 24 pins (16 output only and 8 input only). - fix PCMCIA driver to access the read-only pins rather than the shadow register for status bits. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7027/1: simpad: Add ucb1x00 GPIO definitions and register GPIOJochen Friedrich
Add ucb1x00 GPIO definitions to simpad.h and add gpio_base to ucb1x00 platform device so the pins are available using the GPIO API. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7068/1: process: change from __backtrace to dump_stack in show_regsLaura Abbott
Currently, show_regs calls __backtrace which does nothing if CONFIG_FRAME_POINTER is not set. Switch to dump_stack which handles both CONFIG_FRAME_POINTER and CONFIG_ARM_UNWIND correctly. __backtrace is now superseded by dump_stack in general and show_regs was the last caller so remove __backtrace as well. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7064/1: vexpress: Use wfi macro in platform_do_lowpower.Nick Bowler
Current Versatile Express CPU hotplug code includes a hardcoded WFI instruction, in ARM encoding. When the kernel is compiled in Thumb-2 mode, this is invalid and causes the machine to hang hard when a CPU is offlined. Using the wfi macro (which uses the appropriate assembler mnemonic) causes the correct instruction to be emitted in either case. As a consequence of this change, an apparently vestigial "cc" clobber is dropped from the asm (the macro uses "memory" only). Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7031/1: entry: Fix Thumb-2 undef handling for multi-CPU kernelsDave Martin
When v6 and >=v7 boards are supported in the same kernel, the __und_usr code currently makes a build-time assumption that Thumb-2 instructions occurring in userspace don't need to be supported. Strictly speaking this is incorrect. This patch fixes the above case by doing a run-time check on the CPU architecture in these cases. This only affects kernels which support v6 and >=v7 CPUs together: plain v6 and plain v7 kernels are unaffected. Signed-off-by: Dave Martin <dave.martin@linaro.org> Reviewed-by: Jon Medhurst <tixy@yxit.co.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7030/1: entry: Remove unnecessary masking when decoding Thumb-2 ↵Dave Martin
instructions When testing whether a Thumb-2 instruction is 32 bits long or not, the masking done in order to test bits 11-15 of the first instruction halfword won't affect the result of the comparison, so remove it. Signed-off-by: Dave Martin <dave.martin@linaro.org> Reviewed-by: Jon Medhurst <tixy@yxit.co.uk> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit (git 2.34.1) at 2025-09-16 22:31:07 +0000