summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-11-19Merge branch 'renesas/dt-du' into next/dtArnd Bergmann
This is a base for the DT updates, merged through the arm-soc cleanup branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19ARM: at91/dt: at91sam9g45: add ISI nodeBoris Brezillon
Add ISI (Image Sensor Interface) DT node + pinctrl definition. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91/dt: enable the RTT block on the at91sam9m10g45ek boardBoris Brezillon
Enable the RTT and GPBR devices and specify the general purpose register used to store the current time. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91/dt: enable the RTT block on the sam9g20ek boardBoris Brezillon
Enable the RTT and GPBR devices and specify the general purpose register used to store the current time. Enable wakeup on RTT event on the shutdown controller device. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91/dt: add GPBR nodesBoris Brezillon
Add GPBR (General Purpose Block Backup Registers) nodes. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91/dt: add RTT nodes to at91 dtsisBoris Brezillon
at91sam926x, at91sam9g45 and at91sam9rl SoCs all have at least one RTT block. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91/dt: at91sam9rl: add rtcAlexandre Belloni
Add rtc support to the at91sam9rl dtsi file. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91: fix GPLv2 wordingNicolas Ferre
During the submission of these new sama5d4 files, the GPL notice mentioned the device tree as a library, which is not really accurate. Fix all these library mentions to reflect the fact that it's actually just a file. Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91/dt: sama5d4: add DMA supportLudovic Desroches
Add DMA controllers and device configurations. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91/dt: sama5d4: use macro instead of numeric valueLudovic Desroches
There is a macro for the irq type. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19Merge branch 'topic/at_xdmac' of ↵Nicolas Ferre
git://git.infradead.org/users/vkoul/slave-dma into at91-3.19-dt2
2014-11-19Merge branch 'at91-3.19-dt' into at91-3.19-dt2Nicolas Ferre
2014-11-18powerpc/iommu: Rename iommu_[un]map_sg functionsJoerg Roedel
The IOMMU-API gained support for a new iommu_map_sg function. This causes compile failures on powerpc because the function name is already globally used there. This patch renames adds a ppc_ prefix to these functions to solve the compile problem. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-11-17dmaengine: at_xdmac: Add DMA_PRIVATELudovic Desroches
same issue as commit 7f5ae3553685: "Without DMA_PRIVATE the driver is not able to allocate more than one channel. Since it uses dma_get_any_slave_channel that calls private_candidate, the second allocation fails at /* some channels are already publicly allocated */ " Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-17ARM: dts: at_xdmac: fix bad value of dma-cells in documentationLudovic Desroches
The dma-cells value in the example was 2 instead of 1. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-17dmaengine: at_xdmac: fix missing spin_unlockLudovic Desroches
Lock taken when entering the function but unlock missing before it returns. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-17dmaengine: at_xdmac: fix a bug in transfer residue computationCyrille Pitchen
The total size of the transfer was wrong in at_xdmac_prep_slave_sg() resulting in bad computation of the transfer residue by at_xdmac_tx_status(). Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-17dmaengine: at_xdmac: fix software lockup at_xdmac_tx_status()Cyrille Pitchen
According to the Atmel eXtended DMA controller datasheet, requesting a DMA transfer flush for a channel is only revelant when this transfer is source peripheral synchronized. So we have to check this condition before requesting a channel flush by writing the channel bit into the Global channel SoftWare Flush (GSWF) register then waiting for flush to complete by monitoring the end of Flush Interrupt Status (FIS) bit in the Channel Interrupt Status (CIS) register. Indeed, for non source peripheral synchronized transfer, writing the channel bit into the GSWF register does nothing. Especially, the FIS bit is never set into the CIS register. The former code looped forever waiting for this bit to be set. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-17dmaengine: at_xdmac: remove chancnt affectationLudovic Desroches
Remove chancnt affectation since it is done in dma_async_device_regiser. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-17dmaengine: at_xdmac: prefer usage of readl/writel_relaxedLudovic Desroches
_relaxed version of readl and writel are not implemented on all architecture so COMPILE_TEST has to be removed in order to not cause some build failures. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-17dmaengine: xdmac: fix print warning on dma_addr_t variableVinod Koul
As documented in printk-formats.txt the dma_addr_t should be printed with %pad specfiers. This way it works on all archs. make.cross ARCH=s390 All warnings: drivers/dma/at_xdmac.c: In function 'at_xdmac_prep_slave_sg': >> drivers/dma/at_xdmac.c:621:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] dev_dbg(chan2dev(chan), ^ >> drivers/dma/at_xdmac.c:621:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] >> drivers/dma/at_xdmac.c:628:4: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] dev_dbg(chan2dev(chan), ^ drivers/dma/at_xdmac.c: In function 'at_xdmac_prep_dma_cyclic': >> drivers/dma/at_xdmac.c:663:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] dev_dbg(chan2dev(chan), "%s: buf_addr=0x%08x, buf_len=%d, period_len=%d, dir=%s, flags=0x%lx\n", ^ >> drivers/dma/at_xdmac.c:690:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] dev_dbg(chan2dev(chan), ^ >> drivers/dma/at_xdmac.c:709:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] dev_dbg(chan2dev(chan), ^ >> drivers/dma/at_xdmac.c:709:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] >> drivers/dma/at_xdmac.c:716:4: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] dev_dbg(chan2dev(chan), >> drivers/dma/at_xdmac.c:731:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] dev_dbg(chan2dev(chan), ^ drivers/dma/at_xdmac.c: In function 'at_xdmac_prep_dma_memcpy': >> drivers/dma/at_xdmac.c:765:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] dev_dbg(chan2dev(chan), "%s: src=0x%08x, dest=0x%08x, len=%d, flags=0x%lx\n", ^ >> drivers/dma/at_xdmac.c:765:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] dev_dbg(chan2dev(chan), "%s: remaining_size=%u\n", __func__, remaining_size); ^ >> drivers/dma/at_xdmac.c:845:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] dev_dbg(chan2dev(chan), ^ >> drivers/dma/at_xdmac.c:845:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] >> drivers/dma/at_xdmac.c:852:4: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] dev_dbg(chan2dev(chan), ^ drivers/dma/at_xdmac.c: In function 'at_xdmac_tx_status': >> drivers/dma/at_xdmac.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] dev_dbg(chan2dev(chan), Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-17dmaengine: xdmac: fix print warning on size_t variableVinod Koul
As documented in printk-formats.txt the size_t should be printed with %zu/%zd specfiers. This way it works on all archs. make.cross ARCH=avr32 All warnings: drivers/dma/at_xdmac.c: In function 'at_xdmac_prep_dma_cyclic': >> drivers/dma/at_xdmac.c:663: warning: format '%d' expects type 'int', but argument 6 has type 'size_t' >> drivers/dma/at_xdmac.c:663: warning: format '%d' expects type 'int', but argument 7 has type 'size_t' drivers/dma/at_xdmac.c: In function 'at_xdmac_prep_dma_memcpy': >> drivers/dma/at_xdmac.c:765: warning: format '%d' expects type 'int', but argument 7 has type 'size_t' >> drivers/dma/at_xdmac.c:794: warning: format '%u' expects type 'unsigned int', but argument 5 has type 'size_t' >> drivers/dma/at_xdmac.c:815: warning: format '%u' expects type 'unsigned int', but argument 5 has type 'size_t' Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-17dmaengine: at_xdmac: fix usage of read, write wrappersVinod Koul
This driver uses read_relaxed and writel_relaxed to read, write to IO memory. the config defines COMPILE_TEST so gets compiled on different archs. This causes issue as few archs like x86 etc don't define it. So use readl/writel which is defined in all archs Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-17dmaengine: at_xdmac: fix semicolon.cocci warningskbuild test robot
drivers/dma/at_xdmac.c:702:3-4: Unneeded semicolon Removes unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-14ARM: shmobile: kzm9g-reference: Use keyboard as gpio-keys node nameSimon Horman
This appears to be the best match for ePAPR. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-14ARM: shmobile: koelsch: Use keyboard as gpio-keys node nameSimon Horman
This appears to be the best match for ePAPR. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-14ARM: shmobile: lager: Use keyboard as gpio-keys node nameSimon Horman
This appears to be the best match for ePAPR. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-14ARM: shmobile: armadillo800eva: Use keyboard as gpio-keys node nameSimon Horman
This appears to be the best match for ePAPR. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-12ARM: dts: DRA7: Add aliases for all serial portsNishanth Menon
Add serial port aliases for consoles > 6. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-12ARM: dts: Add am57xx-beagle-x15Nishanth Menon
BeagleBoard-X15 is the next generation Open Source Hardware BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15 processor. The platform features 2GB DDR3L (w/dual 32bit busses), eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G Ethernet. For more information, refer to: BeagleBoard-X15 Wiki: http://www.elinux.org/Beagleboard:BeagleBoard-X15 AM5728 is part of the Sitara product family whose additional details will be available: http://www.ti.com/lsds/ti/arm/overview.page Technical Reference Manual for AM5728 is public domain at: http://www.ti.com/lit/spruhz6 Just add basic support for the moment, the following updates are needed: i) Ethernet - depends on SoC dts fixes ii) USB Client (USB2) - depends on GPIO extcon ii) HDMI - additional driver fixes pending iii) Audio - additional driver fixes pending NOTE: AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All unused power supply balls must be supplied with the voltages specified in the Section 5.2, Recommended Operating Conditions". This implies that all unused voltage rails for AM5728 can never be switched off even if the hardware blocks inside that voltage domain is unused. Switching off these unused rails may result in stability issues on other domains and increased leakage and power-on-hour impacts. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-12ARM: OMAP2+: igep00x0: Add pdata-quirks for the btwilink device.Enric Balletbo i Serra
Add btwilink device for IGEPv2 Rev. F and IGEP COM MODULE Rev. G. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-12ARM: dts: omap3-igep00x0: Remove i2c2 node.Enric Balletbo i Serra
We can't suppose that the i2c2 pins are configured as I2C bus, these pins are connected to expansion connectors. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-12ARM: dts: omap3-igep0020-rev-f: Support IGEPv2 Rev. FEnric Balletbo i Serra
Add support for the new hardware revision of the IGEPv2. Basically, the new revision F replaces the old Wifi module for a Wilink8 based module. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-12ARM: dts: omap3-igep0020-common: Introduce igep0020 common dtsi file.Enric Balletbo i Serra
Use the omap3-igep0020-common.dtsi file and remove repeated parts leaving the nodes that are not common between IGEPv2 hardware revisions. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-12ARM: dts: omap3-igep0030-rev-g: Support IGEP COM MODULE Rev. GEnric Balletbo i Serra
Add support for the new hardware revision of the IGEP COM MODULE. Basically, the new revision G replaces the old Wifi module for a Wilink8 based module. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-12ARM: dts: omap3-igep0030-common: Introduce igep0030 common dtsi file.Enric Balletbo i Serra
Use the omap3-igep0030-common.dtsi file and remove repeated parts leaving the nodes that are not common between IGEP COM MODULE hardware revisions. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-12ARM: dts: omap3-igep00x0: Move outside common file the on board Wifi module.Enric Balletbo i Serra
New IGEP boards revisions will use another Wifi module, so this patch moves the DT nodes outside the common omap3-igep.dtsi file to specific DT for every board. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-12ARM: dts: omap3-igep0020: Specify IGEPv2 revision in device tree.Enric Balletbo i Serra
We'll introduce new hardware revisions soon. This patch is only to indicate which board revision supports this device tree file in order to avoid confusions. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-12ARM: dts: omap3-igep0030: Specify IGEP COM revision in device tree.Enric Balletbo i Serra
We'll introduce new hardware revisions soon. This patch is only to indicate which board revision supports this device tree file in order to avoid confusions. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-12ARM: dts: omap3-igep00x0: Move NAND configuration to a common place.Enric Balletbo i Serra
At this moment all supported boards use same NAND chip, so has more sense move the GPMC and NAND configuration to the omap3-igep.dtsi common place. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-12ARM: dts: omap3-igep00x0: Fix UART2 pins that aren't common.Enric Balletbo i Serra
UART2 is used to connect the processor with the bluetooth chip, these pins are not common between IGEPv2 boards and IGEP COM MODULE boards. This patch muxes the correct pins for every board and removes UART2 configuration from common omap3-igep.dtsi file. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-11ARM: dts: Enable Broadcom Cygnus SoCScott Branden
DT files to enable cygnus consisting on reference designs and cygnus core configuration. Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Arun Parameswaran <aparames@broadcom.com> Tested-by: Jonathan Richardson <jonathar@broadcom.com> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2014-11-11dt-bindings: Document Broadcom Cygnus SoC and clocksJonathan Richardson
Reviewed-by: Arun Parameswaran <aparames@broadcom.com> Tested-by: Jonathan Richardson <jonathar@broadcom.com> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com> Reviewed-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2014-11-11phy: Add PHY header file for DT x Driver definesGabriel FERNANDEZ
This provides the shared header file which will be reference from both PHY driver and its associated Device Tree node(s). Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
2014-11-10ARM: dts: dra7: add labels to DWC3 nodesFelipe Balbi
by adding labels to DWC3 nodes, it's far easier for boards to reference them. Signed-off-by: Felipe Balbi <balbi@ti.com> [tony@atomide.com: updated for otg 4 move to dra74x.dtsi] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-10ARM: dts: dra72x-evm: Enable CPSW and MDIOMugunthan V N
Adding CPSW phy-id, CPSW and MDIO pinmux configuration for active and sleep states and enable them in board evm dts file. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-10ARM: dts: dra7-evm: Keep all VDD rails always-onNishanth Menon
DRA7 Data Manual (SPRS857L - August 2014) section 4.1.1 states: "All unused power supply balls must be supplied with the voltages specified in the Section 5.2, Recommended Operating Conditions". This implies that all unused voltage rails for Vayu can never be switched off even if the hardware blocks inside that voltage domain is unused. Switching off these unused rails may result in stability issues on other domains and increased leakage and power-on-hour impacts. J6eco-evm dts file already considers this, however j6evm-dts file needs to be fixed to consider this constraint of the SoC. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-10ARM: dts: dra72-evm: Add MMC nodesNishanth Menon
Add MMC1 and 2 nodes. MMC1 is SDcard and MMC2 is eMMC. NOTE on MMC1 card detect: Ideally, we should be using in-built SDCD support, but we dont have it yet. So, use the fact that control module of DRA7 is setup such that no matter what mode one configures it, GPIO option is always hardwired in - use GPIO mode for SDcard detection. [peter.ujfalusi@ti.com] The power line feeding the SD card is also used by other devices on the EVM. Use generic name instead of mmc2_3v3 so when other devices want to use the same regulator it will look a bit better. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-10ARM: dts: dra72-evm: Add power button nodeNishanth Menon
With Commit adff5962fdd2 ("Input: introduce palmas-pwrbutton"), we can now support tps power button as a event source - This is SW7 (PB/WAKE) on the J6-evm. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-10ARM: dts: dra72-evm: Provide explicit pinmux for TPS PMICNishanth Menon
Even thought sys_nirq1 is hardwired on the SoC for the pin, it is better to configure the pin to the required mux configuration. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit (git 2.34.1) at 2025-09-22 14:58:50 +0000