summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-08-21ALSA: line6: Fix memory leak at line6_init_pcm() error pathTakashi Iwai
I forgot to release the allocated object at the early error path in line6_init_pcm(). For addressing it, slightly shuffle the code so that the PCM destructor (pcm->private_free) is assigned properly before all error paths. Fixes: 3450121997ce ("ALSA: line6: Fix write on zero-sized buffer") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-08-21bpf: sync bpf.h to tools/Peter Wu
Fix a 'struct pt_reg' typo and clarify when bpf_trace_printk discards lines. Affects documentation only. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-21bpf: clarify when bpf_trace_printk discards linesPeter Wu
I opened /sys/kernel/tracing/trace once and kept reading from it. bpf_trace_printk somehow did not seem to work, no entries were appended to that trace file. It turns out that tracing is disabled when that file is open. Save the next person some time and document this. The trace file is described in Documentation/trace/ftrace.rst, however the implication "tracing is disabled" did not immediate translate to "bpf_trace_printk silently discards entries". Signed-off-by: Peter Wu <peter@lekensteyn.nl> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-21bpf: fix 'struct pt_reg' typo in documentationPeter Wu
There is no 'struct pt_reg'. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-21bpf: clarify description for CONFIG_BPF_EVENTSPeter Wu
PERF_EVENT_IOC_SET_BPF supports uprobes since v4.3, and tracepoints since v4.7 via commit 04a22fae4cbc ("tracing, perf: Implement BPF programs attached to uprobes"), and commit 98b5c2c65c29 ("perf, bpf: allow bpf programs attach to tracepoints") respectively. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-21selftests/kvm: make platform_info_test pass on AMDVitaly Kuznetsov
test_msr_platform_info_disabled() generates EXIT_SHUTDOWN but VMCB state is undefined after that so an attempt to launch this guest again from test_msr_platform_info_enabled() fails. Reorder the tests to make test pass. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-21Merge tag 'nfsd-5.3-1' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd fixes from Bruce Fields: "Fix nfsd bugs: three in the new nfsd/clients/ code, one in the reply cache containerization" * tag 'nfsd-5.3-1' of git://linux-nfs.org/~bfields/linux: nfsd4: Fix kernel crash when reading proc file reply_cache_stats nfsd: initialize i_private before d_add nfsd: use i_wrlock instead of rcu for nfsdfs i_private nfsd: fix dentry leak upon mkdir failure.
2019-08-21usb-storage: Add new JMS567 revision to unusual_devsHenk van der Laan
Revision 0x0117 suffers from an identical issue to earlier revisions, therefore it should be added to the quirks list. Signed-off-by: Henk van der Laan <opensource@henkvdlaan.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190816200847.21366-1-opensource@henkvdlaan.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-21usb: chipidea: udc: don't do hardware access if gadget has stoppedPeter Chen
After _gadget_stop_activity is executed, we can consider the hardware operation for gadget has finished, and the udc can be stopped and enter low power mode. So, any later hardware operations (from usb_ep_ops APIs or usb_gadget_ops APIs) should be considered invalid, any deinitializatons has been covered at _gadget_stop_activity. I meet this problem when I plug out usb cable from PC using mass_storage gadget, my callstack like: vbus interrupt->.vbus_session-> composite_disconnect ->pm_runtime_put_sync(&_gadget->dev), the composite_disconnect will call fsg_disable, but fsg_disable calls usb_ep_disable using async way, there are register accesses for usb_ep_disable. So sometimes, I get system hang due to visit register without clock, sometimes not. The Linux Kernel USB maintainer Alan Stern suggests this kinds of solution. See: http://marc.info/?l=linux-usb&m=138541769810983&w=2. Cc: <stable@vger.kernel.org> #v4.9+ Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20190820020503.27080-2-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-21usbtmc: more sanity checking for packet sizeOliver Neukum
A malicious device can make the driver divide ny zero with a nonsense maximum packet size. Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190820092826.17694-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-21usb: udc: lpc32xx: silence fall-through warningGustavo A. R. Silva
Silence the following fall-through warning by adding a break statement: drivers/usb/gadget/udc/lpc32xx_udc.c:2230:3: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20190821021627.GA2679@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-21dm raid: add missing cleanup in raid_ctr()Wenwen Wang
If rs_prepare_reshape() fails, no cleanup is executed, leading to leak of the raid_set structure allocated at the beginning of raid_ctr(). To fix this issue, go to the label 'bad' if the error occurs. Fixes: 11e4723206683 ("dm raid: stop keeping raid set frozen altogether") Cc: stable@vger.kernel.org Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-21dm zoned: fix potential NULL dereference in dmz_do_reclaim()Dan Carpenter
This function is supposed to return error pointers so it matches the dmz_get_rnd_zone_for_reclaim() function. The current code could lead to a NULL dereference in dmz_do_reclaim() Fixes: b234c6d7a703 ("dm zoned: improve error handling in reclaim") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-21dm dust: use dust block size for badblocklist indexBryan Gurney
Change the "frontend" dust_remove_block, dust_add_block, and dust_query_block functions to store the "dust block number", instead of the sector number corresponding to the "dust block number". For the "backend" functions dust_map_read and dust_map_write, right-shift by sect_per_block_shift. This fixes the inability to emulate failure beyond the first sector of each "dust block" (for devices with a "dust block size" larger than 512 bytes). Fixes: e4f3fabd67480bf ("dm: add dust target") Cc: stable@vger.kernel.org Signed-off-by: Bryan Gurney <bgurney@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-21selftests/bpf: install files test_xdp_vlan.shAnders Roxell
When ./test_xdp_vlan_mode_generic.sh runs it complains that it can't find file test_xdp_vlan.sh. # selftests: bpf: test_xdp_vlan_mode_generic.sh # ./test_xdp_vlan_mode_generic.sh: line 9: ./test_xdp_vlan.sh: No such file or directory Rework so that test_xdp_vlan.sh gets installed, added to the variable TEST_PROGS_EXTENDED. Fixes: d35661fcf95d ("selftests/bpf: add wrapper scripts for test_xdp_vlan.sh") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Jesper Dangaard Brouer <jbrouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21selftests/bpf: add config fragment BPF_JITAnders Roxell
When running test_kmod.sh the following shows up # sysctl cannot stat /proc/sys/net/core/bpf_jit_enable No such file or directory cannot: stat_/proc/sys/net/core/bpf_jit_enable # # sysctl cannot stat /proc/sys/net/core/bpf_jit_harden No such file or directory cannot: stat_/proc/sys/net/core/bpf_jit_harden # Rework to enable CONFIG_BPF_JIT to solve "No such file or directory" Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21selftests/bpf: fix test_btf_dump with O=Ilya Leoshkevich
test_btf_dump fails when run with O=, because it needs to access source files and assumes they live in ./progs/, which is not the case in this scenario. Fix by instructing kselftest to copy btf_dump_test_case_*.c files to the test directory. Since kselftest does not preserve directory structure, adjust the test to look in ./progs/ and then in ./. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21selftests/bpf: fix test_cgroup_storage on s390Ilya Leoshkevich
test_cgroup_storage fails on s390 with an assertion failure: packets are dropped when they shouldn't. The problem is that BPF_DW packet count is accessed as BPF_W with an offset of 0, which is not correct on big-endian machines. Since the point of this test is not to verify narrow loads/stores, simply use BPF_DW when working with packet counts. Fixes: 68cfa3ac6b8d ("selftests/bpf: add a cgroup storage test") Fixes: 919646d2a3a9 ("selftests/bpf: extend the storage test to test per-cpu cgroup storage") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21net/mlx5: Create bypass and loopback flow steering namespaces for RDMA RXMark Zhang
Use different namespaces for bypass and switchdev loopback because they have different priorities and default table miss action requirement: 1. bypass: with multiple priorities support, and MLX5_FLOW_TABLE_MISS_ACTION_DEF as the default table miss action; 2. switchdev loopback: with single priority support, and MLX5_FLOW_TABLE_MISS_ACTION_SWITCH_DOMAIN as the default table miss action. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-08-21net/mlx5: Add per-namespace flow table default miss action supportMark Zhang
Currently all the namespaces under the same steering domain share the same default table miss action, however in some situations (e.g., RDMA RX) different actions are required. This patch adds a per-namespace default table miss action instead of using the miss action of the steering domain. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-08-21btf: do not use CONFIG_OUTPUT_FORMATIlya Leoshkevich
Building s390 kernel with CONFIG_DEBUG_INFO_BTF fails, because CONFIG_OUTPUT_FORMAT is not defined. As a matter of fact, this variable appears to be x86-only, so other arches might be affected as well. Fix by obtaining this value from objdump output, just like it's already done for bin_arch. The exact objdump invocation is "inspired" by arch/powerpc/boot/wrapper. Also, use LANG=C for the existing bin_arch objdump invocation to avoid potential build issues on systems with non-English locale. Fixes: 341dfcf8d78e ("btf: expose BTF info through sysfs") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21Revert "mmc: sdhci-tegra: drop ->get_ro() implementation"Dmitry Osipenko
The WRITE_PROTECT bit is always in a "protected mode" on Tegra and WP-GPIO state need to be used instead. In a case of the GPIO absence, write-enable should be assumed. External SD is writable once again as a result of this patch because the offending commit changed behaviour for the case of a missing WP-GPIO to fall back to WRITE_PROTECT bit-checking, which is incorrect for Tegra. Cc: stable@vger.kernel.org # v5.1+ Fixes: e8391453e27f ("mmc: sdhci-tegra: drop ->get_ro() implementation") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-08-21samples: bpf: syscall_nrs: use mmap2 if definedIvan Khoronzhuk
For arm32 xdp sockets mmap2 is preferred, so use it if it's defined. Declaration of __NR_mmap can be skipped and it breaks build. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21xdp: xdp_umem: replace kmap on vmap for umem mapIvan Khoronzhuk
For 64-bit there is no reason to use vmap/vunmap, so use page_address as it was initially. For 32 bits, in some apps, like in samples xdpsock_user.c when number of pgs in use is quite big, the kmap memory can be not enough, despite on this, kmap looks like is deprecated in such cases as it can block and should be used rather for dynamic mm. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21libbpf: use LFS (_FILE_OFFSET_BITS) instead of direct mmap2 syscallIvan Khoronzhuk
Drop __NR_mmap2 fork in flavor of LFS, that is _FILE_OFFSET_BITS=64 (glibc & bionic) / LARGEFILE64_SOURCE (for musl) decision. It allows mmap() to use 64bit offset that is passed to mmap2 syscall. As result pgoff is not truncated and no need to use direct access to mmap2 for 32 bits systems. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21drm/i915: Fix HW readout for crtc_clock in HDMI modeImre Deak
The conversion during HDMI HW readout from port_clock to crtc_clock was missed when HDMI 10bpc support was added, so fix that. v2: - Unscrew the non-HDMI case. Fixes: cd9e11a8bf25 ("drm/i915/icl: Add 10-bit support for hdmi") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109593 Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190808162547.7009-1-imre.deak@intel.com (cherry picked from commit 2969a78aead38b49e80c821a5c683544ab16160d) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-08-21mac80211: minstrel_ht: improve rate probing for devices with static fallbackFelix Fietkau
On some devices that only support static rate fallback tables sending rate control probing packets can be really expensive. Probing lower rates can already hurt throughput quite a bit. What hurts even more is the fact that on mt76x0/mt76x2, single probing packets can only be forced by directing packets at a different internal hardware queue, which causes some heavy reordering and extra latency. The reordering issue is mainly problematic while pushing lots of packets to a particular station. If there is little activity, the overhead of probing is neglegible. The static fallback behavior is designed to pretty much only handle rate control algorithms that use only a very limited set of rates on which the algorithm switches up/down based on packet error rate. In order to better support that kind of hardware, this patch implements a different approach to rate probing where it switches to a slightly higher rate, waits for tx status feedback, then updates the stats and switches back to the new max throughput rate. This only triggers above a packet rate of 100 per stats interval (~50ms). For that kind of probing, the code has to reduce the set of probing rates a lot more compared to single packet probing, so it uses only one packet per MCS group which is either slightly faster, or as close as possible to the max throughput rate. This allows switching between similar rates with different numbers of streams. The algorithm assumes that the hardware will work its way lower within an MCS group in case of retransmissions, so that lower rates don't have to be probed by the high packets per second rate probing code. To further reduce the search space, it also does not probe rates with lower channel bandwidth than the max throughput rate. At the moment, these changes will only affect mt76x0/mt76x2. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: minstrel_ht: fix default max throughput rate indexesFelix Fietkau
Use the first supported rate instead of 0 (which can be invalid) Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20190820095449.45255-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: minstrel_ht: reduce unnecessary rate probing attemptsFelix Fietkau
On hardware with static fallback tables (e.g. mt76x2), rate probing attempts can be very expensive. On such devices, avoid sampling rates slower than the per-group max throughput rate, based on the assumption that the fallback table will take care of probing lower rates within that group if the higher rates fail. To further reduce unnecessary probing attempts, skip duplicate attempts on rates slower than the max throughput rate. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20190820095449.45255-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: minstrel_ht: fix per-group max throughput rate initializationFelix Fietkau
The group number needs to be multiplied by the number of rates per group to get the full rate index Fixes: 5935839ad735 ("mac80211: improve minstrel_ht rate sorting by throughput & probability") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20190820095449.45255-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21nl80211: Add support for EDMG channelsAlexei Avshalom Lazar
802.11ay specification defines Enhanced Directional Multi-Gigabit (EDMG) STA and AP which allow channel bonding of 2 channels and more. Introduce new NL attributes that are needed for enabling and configuring EDMG support. Two new attributes are used by kernel to publish driver's EDMG capabilities to the userspace: NL80211_BAND_ATTR_EDMG_CHANNELS - bitmap field that indicates the 2.16 GHz channel(s) that are supported by the driver. When this attribute is not set it means driver does not support EDMG. NL80211_BAND_ATTR_EDMG_BW_CONFIG - represent the channel bandwidth configurations supported by the driver. Additional two new attributes are used by the userspace for connect command and for AP configuration: NL80211_ATTR_WIPHY_EDMG_CHANNELS NL80211_ATTR_WIPHY_EDMG_BW_CONFIG New rate info flag - RATE_INFO_FLAGS_EDMG, can be reported from driver and used for bitrate calculation that will take into account EDMG according to the 802.11ay specification. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Link: https://lore.kernel.org/r/1566138918-3823-2-git-send-email-ailizaro@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: fix possible NULL pointerderef in obss pd codeJohn Crispin
he_spr_ie_elem is dereferenced before the NULL check. fix this by moving the assignment after the check. fixes commit 697f6c507c74 ("mac80211: propagate HE operation info into bss_conf") This was reported by the static code checker. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190813070712.25509-1-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: add assoc-at supportBen Greear
Report timestamp for when sta becomes associated. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20190809180001.26393-2-greearb@candelatech.com [fix ktime_get_boot_ns() to ktime_get_boottime_ns(), assoc_at type to u64] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: Support assoc-at timer in sta-infoBen Greear
Report timestamp of when sta became associated. This is the boottime clock, units are nano-seconds. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20190809180001.26393-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: apply same mandatory rate flags for 5GHz and 6GHzArend van Spriel
For the new 6GHz band the same rules apply for mandatory rates so add it to set_mandatory_flags_band() function. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-9-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: ibss: use 11a mandatory rates for 6GHz band operationArend van Spriel
The default mandatory rates, ie. when not specified by user-space, is determined by the band. Select 11a rateset for 6GHz band. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-8-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: use same IR permissive rules for 6GHz bandArend van Spriel
The function cfg80211_ir_permissive_chan() is applicable for 6GHz band as well so make sure it is handled. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-7-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: add 6GHz in code handling array with NUM_NL80211_BANDS entriesArend van Spriel
In nl80211.c there is a policy for all bands in NUM_NL80211_BANDS and in trace.h there is a callback trace for multicast rates which is per band in NUM_NL80211_BANDS. Both need to be extended for the new NL80211_BAND_6GHZ. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-6-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: extend ieee80211_operating_class_to_band() for 6GHzArend van Spriel
Add 6GHz operating class range as defined in 802.11ax D4.1 Annex E. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-5-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: util: add 6GHz channel to freq conversion and vice versaArend van Spriel
Extend the functions ieee80211_channel_to_frequency() and ieee80211_frequency_to_channel() to support 6GHz band according specification in 802.11ax D4.1 27.3.22.2. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-4-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: add 6GHz UNII band definitionsArend van Spriel
For the new 6GHz there are new UNII band definitions as listed in the FCC notice [1]. [1] https://docs.fcc.gov/public/attachments/FCC-18-147A1_Rcd.pdf Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-3-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21nl80211: add 6GHz band definition to enum nl80211_bandArend van Spriel
In the 802.11ax specification a new band is introduced, which is also proposed by FCC for unlicensed use. This band is referred to as 6GHz spanning frequency range from 5925 to 7125 MHz. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-2-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21modules: page-align module section allocations only for arches supporting ↵He Zhe
strict module rwx We should keep the case of "#define debug_align(X) (X)" for all arches without CONFIG_HAS_STRICT_MODULE_RWX ability, which would save people, who are sensitive to system size, a lot of memory when using modules, especially for embedded systems. This is also the intention of the original #ifdef... statement and still valid for now. Note that this still keeps the effect of the fix of the following commit, 38f054d549a8 ("modules: always page-align module section allocations"), since when CONFIG_ARCH_HAS_STRICT_MODULE_RWX is enabled, module pages are aligned. Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-08-21Revert "cfg80211: fix processing world regdomain when non modular"Hodaszi, Robert
This reverts commit 96cce12ff6e0 ("cfg80211: fix processing world regdomain when non modular"). Re-triggering a reg_process_hint with the last request on all events, can make the regulatory domain fail in case of multiple WiFi modules. On slower boards (espacially with mdev), enumeration of the WiFi modules can end up in an intersected regulatory domain, and user cannot set it with 'iw reg set' anymore. This is happening, because: - 1st module enumerates, queues up a regulatory request - request gets processed by __reg_process_hint_driver(): - checks if previous was set by CORE -> yes - checks if regulator domain changed -> yes, from '00' to e.g. 'US' -> sends request to the 'crda' - 2nd module enumerates, queues up a regulator request (which triggers the reg_todo() work) - reg_todo() -> reg_process_pending_hints() sees, that the last request is not processed yet, so it tries to process it again. __reg_process_hint driver() will run again, and: - checks if the last request's initiator was the core -> no, it was the driver (1st WiFi module) - checks, if the previous initiator was the driver -> yes - checks if the regulator domain changed -> yes, it was '00' (set by core, and crda call did not return yet), and should be changed to 'US' ------> __reg_process_hint_driver calls an intersect Besides, the reg_process_hint call with the last request is meaningless since the crda call has a timeout work. If that timeout expires, the first module's request will lost. Cc: stable@vger.kernel.org Fixes: 96cce12ff6e0 ("cfg80211: fix processing world regdomain when non modular") Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com> Link: https://lore.kernel.org/r/20190614131600.GA13897@a1-hr Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: add missing length field increment when generating Radiotap headerJohn Crispin
The code generating the Tx Radiotap header when using tx_status_ext was missing a field increment after setting the VHT bandwidth. Fixes: 3d07ffcaf320 ("mac80211: add struct ieee80211_tx_status support to ieee80211_add_tx_radiotap_header") Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190807075949.32414-4-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: 80Mhz was not reported properly when using tx_status_extJohn Crispin
When reporting 80MHz, we need to set 4 and not 2 inside the corresponding field inside the Tx Radiotap header. Fixes: 3d07ffcaf320 ("mac80211: add struct ieee80211_tx_status support to ieee80211_add_tx_radiotap_header") Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190807075949.32414-3-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: fix bad guard when reporting legacy ratesJohn Crispin
When reporting legacy rates inside the TX Radiotap header we need to split the check between "uses tx_statua_ext" and "is legacy rate". Not doing so would make the code drop into the !tx_status_ext path. Fixes: 3d07ffcaf320 ("mac80211: add struct ieee80211_tx_status support to ieee80211_add_tx_radiotap_header") Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190807075949.32414-2-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: fix TX legacy rate reporting when tx_status_ext is usedJohn Crispin
The RX Radiotap header length was not calculated properly when reporting legacy rates using tx_status_ext. Fixes: 3d07ffcaf320 ("mac80211: add struct ieee80211_tx_status support to ieee80211_add_tx_radiotap_header") Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190807075949.32414-1-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"Paolo Bonzini
This reverts commit 4e103134b862314dc2f2f18f2fb0ab972adc3f5f. Alex Williamson reported regressions with device assignment with this patch. Even though the bug is probably elsewhere and still latent, this is needed to fix the regression. Fixes: 4e103134b862 ("KVM: x86/mmu: Zap only the relevant pages when removing a memslot", 2019-02-05) Reported-by: Alex Willamson <alex.williamson@redhat.com> Cc: stable@vger.kernel.org Cc: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-21selftests: kvm: fix state save/load on processors without XSAVEPaolo Bonzini
state_test and smm_test are failing on older processors that do not have xcr0. This is because on those processor KVM does provide support for KVM_GET/SET_XSAVE (to avoid having to rely on the older KVM_GET/SET_FPU) but not for KVM_GET/SET_XCRS. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-18 07:00:26 +0000