| Age | Commit message (Collapse) | Author |
|---|
|
According to Amlogic datasheets for the SoCs supported by this driver, the
maximum bit clock rate is 100MHz.
The tdm interface allows the rates listed by the DAI driver, regardless of
the number slots or their width. However, these will impact the bit clock
rate.
Hitting the 100MHz limit is very unlikely for most use cases but it is
possible.
For example with 32 slots / 32 bits wide, the maximum rate is no longer
384kHz but ~96kHz.
Add the constraint accordingly if the component is not already active.
If it is active, the rate is already constrained by the first stream rate.
Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20240223175116.2005407-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
By default, when mclk-fs is not provided, the tdm-interface driver
requests an MCLK that is 4x the bit clock, SCLK.
However there is no justification for this:
* If the codec needs MCLK for its operation, mclk-fs is expected to be set
according to the codec requirements.
* If the codec does not need MCLK the minimum is 2 * SCLK, because this is
minimum the divider between SCLK and MCLK can do.
Multiplying by 4 may cause problems because the PLL limit may be reached
sooner than it should, so use 2x instead.
Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20240223175116.2005407-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Starting with Qualcomm SM8350 SoC, so Low Power Audio SubSystem (LPASS)
block version v9.2, the register responsible for TX SMIC MUXn muxes is
different. In earlier LPASS versions this mux had bit fields for
analogue (ADCn) and digital (SWR_DMICn) MICs. Choice of ADCn was
selecting the analogue path in CDC_TX_TOP_CSR_SWR_DMICn_CTL register.
With LPASS v9.2 and newer, the bit fields are integrated into just
SWR_MICn and there is no distinction for analogue or digital MIC in the
register.
Fix support for LPASS v9.2+:
1. Add new set of widgets and audio routes for LPASS v9.2.
2. Do not choose analogue or digital in CDC_TX_TOP_CSR_SWR_DMICn_CTL
based on value of the mux.
3. Replace all the input widgets (TX SWR_ADCn, TX SWR_DMICn) with TX
SWR_INPUTn ones.
The change is not backwards compatible with older DTBs and existing
mixer settings, therefore it does not change handling of older platforms
with working micrphones (SC8280xp) but only the ones with issues
(SM8450, SM8550) which need the fix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240226115925.53953-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
TX macro codec differs slightly between different Qualcomm Low Power
Audio SubSystem (LPASS) block versions. In LPASS version 9.2 the
register responsible for TX SMIC MUXn muxes is different, thus to
properly support it, the driver needs to register different widgets per
different LPASS version.
Prepare for supporting this register difference by refactoring existing
code:
1. Move few widgets (TX SMIC MUXn, TX SWR_ADCn, TX SWR_DMICn) out of
common 'tx_macro_dapm_widgets[]' array to a new per-variant specific
array 'tx_macro_dapm_widgets_v9[]'.
2. Move also related audio routes into new array.
3. Store pointers to these variant-specific arrays in new variant-data
structure 'tx_macro_data'.
4. Add variant-specific widgets and routes in component probe, instead
of driver probe.
The change should have no real impact, except re-shuffling code and
registering some widgets and audio routes in component probe, instead of
driver probe.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240226115925.53953-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Lenovo Slim/Yoga Pro 9 14IRP8 requires a special fixup because there is
a collision of its PCI SSID (17aa:3802) with Lenovo Yoga DuetITL 2021
codec SSID.
Fixes: 3babae915f4c ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208555
Link: https://lore.kernel.org/all/d5b42e483566a3815d229270abd668131a0d9f3a.camel@irl.hu
Cc: stable@vger.kernel.org
Signed-off-by: Willian Wang <git@willian.wang>
Reviewed-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/170879111795.8.6687687359006700715.273812184@willian.wang
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Factory calibration of the speakers stores the calibration information
into an EFI variable.
This set of patches adds support for applying speaker calibration
data from that EFI variable.
The HDA patch (#5) depends on the ASoC patches #2 and #3
|
|
Add sam9x7 compatible in the DT documentation.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240223172657.672439-1-varshini.rajendran@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add sam9x7 compatible to DT bindings documentation.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Link: https://lore.kernel.org/r/20240223172608.672190-1-varshini.rajendran@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If there are factory calibration settings in EFI, extract the
settings and write them to the firmware calibration controls.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240223153910.2063698-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If there are factory calibration settings in EFI, extract the
settings and write them to the firmware calibration controls.
This must be done after any firmware or coefficients have been
downloaded to the amp.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240223153910.2063698-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Adds some helper functions and data for applying amp calibration.
1. cs35l56_read_silicon_uid() to get the silicon ID that is used to
search for the correct calibration data entry.
2. Add the registers for the silicon ID to the readable registers.
3. cs35l56_get_calibration() wrapper around
cs_amp_get_efi_calibration_data()
4. cs35l56_calibration_controls() table of the firmware controls
for calibration data.
5. Added members to struct cs35l56_base to store the calibration
data.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240223153910.2063698-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Create a new library for code that is used by multiple Cirrus Logic
amps. This initially implements extracting amp calibration data
from EFI and writing it to firmware controls.
During factory calibration of built-in speakers the firmware
calibration constants are stored in an EFI file. The file contains
an array of calibration constants for each of the speakers.
cs_amp_get_calibration_data() searches for an entry matching the
requested UID stamp, otherwise by array index. If the data is found in
EFI the constants for that speaker are copied back to the caller.
If EFI is not enabled, the cs_amp_get_calibration_data() implementation
will compile to simply return -ENOENT and the linker can drop the code.
The code to write calibration controls uses cs_dsp. Building of cs_dsp
is not forced. Instead, the code will compile away the calls to
cs_dsp if cs_dsp is not reachable.
This strategy of conditional code allows cs-amp-lib to be shared by
multiple drivers without forcing inclusion of other modules that might
be unnecessary.
The calls to efi.get_variable() and cs_dsp are in small wrapper
functions. This is so that a KUNIT_STATIC_STUB_REDIRECT can be added in
a future patch to redirect these calls to replacement functions for
KUnit testing.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240223153910.2063698-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Separate the functionality of wm_adsp_event() into two exported
functions wm_adsp_start() and wm_adsp_stop().
This allows the codec driver to start and stop the DSP outside of a
DAPM widget.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240223153910.2063698-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_card_get_kcontrol() must be holding a read lock on
card->controls_rwsem while walking the controls list.
Compare with snd_ctl_find_numid().
The existing function is renamed snd_soc_card_get_kcontrol_locked()
so that it can be called from contexts that are already holding
card->controls_rwsem (for example, control get/put functions).
There are few direct or indirect callers of
snd_soc_card_get_kcontrol(), and most are safe. Three require
changes, which have been included in this patch:
codecs/cs35l45.c:
cs35l45_activate_ctl() is called from a control put() function so
is changed to call snd_soc_card_get_kcontrol_locked().
codecs/cs35l56.c:
cs35l56_sync_asp1_mixer_widgets_with_firmware() is called from
control get()/put() functions so is changed to call
snd_soc_card_get_kcontrol_locked().
fsl/fsl_xcvr.c:
fsl_xcvr_activate_ctl() is called from three places, one of which
already holds card->controls_rwsem:
1. fsl_xcvr_mode_put(), a control put function, which will
already be holding card->controls_rwsem.
2. fsl_xcvr_startup(), a DAI startup function.
3. fsl_xcvr_shutdown(), a DAI shutdown function.
To fix this, fsl_xcvr_activate_ctl() has been changed to call
snd_soc_card_get_kcontrol_locked() so that it is safe to call
directly from fsl_xcvr_mode_put().
The fsl_xcvr_startup() and fsl_xcvr_shutdown() functions have been
changed to take a read lock on card->controls_rsem() around calls
to fsl_xcvr_activate_ctl(). While this is not very elegant, it
keeps the change small, to avoid this patch creating a large
collateral churn in fsl/fsl_xcvr.c.
Analysis of other callers of snd_soc_card_get_kcontrol() is that
they do not need any changes, they are not holding card->controls_rwsem
when they call snd_soc_card_get_kcontrol().
Direct callers of snd_soc_card_get_kcontrol():
fsl/fsl_spdif.c: fsl_spdif_dai_probe() - DAI probe function
fsl/fsl_micfil.c: voice_detected_fn() - IRQ handler
Indirect callers via soc_component_notify_control():
codecs/cs42l43: cs42l43_mic_shutter() - IRQ handler
codecs/cs42l43: cs42l43_spk_shutter() - IRQ handler
codecs/ak4118.c: ak4118_irq_handler() - IRQ handler
codecs/wm_adsp.c: wm_adsp_write_ctl() - not currently used
Indirect callers via snd_soc_limit_volume():
qcom/sc8280xp.c: sc8280xp_snd_init() - DAIlink init function
ti/rx51.c: rx51_aic34_init() - DAI init function
I don't have hardware to test the fsl/*, qcom/sc828xp.c, ti/rx51.c
and ak4118.c changes.
Backport note:
The fsl/, qcom/, cs35l45, cs35l56 and cs42l43 callers were added
since the Fixes commit so won't all be present on older kernels.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 209c6cdfd283 ("ASoC: soc-card: move snd_soc_card_get_kcontrol() to soc-card")
Link: https://lore.kernel.org/r/20240221123710.690224-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The volume of subwoofer channels is always at maximum with the
ALC269_FIXUP_THINKPAD_ACPI chain.
Use ALC285_FIXUP_THINKPAD_HEADSET_JACK to align it to the master volume.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208555#c827
Fixes: 3babae915f4c ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/7ffae10ebba58601d25fe2ff8381a6ae3a926e62.1708687813.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240223084241.3361-5-tiwai@suse.de
|
|
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240223084241.3361-4-tiwai@suse.de
|
|
Now we have a nice definition of CLASS(fd) that can be applied as a
clean up for the fdget/fdput pairs in snd_pcm_link().
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240223084241.3361-2-tiwai@suse.de
|
|
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240222111509.28390-10-tiwai@suse.de
|
|
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240222111509.28390-9-tiwai@suse.de
|
|
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240222111509.28390-8-tiwai@suse.de
|
|
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240222111509.28390-7-tiwai@suse.de
|
|
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240222111509.28390-6-tiwai@suse.de
|
|
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240222111509.28390-5-tiwai@suse.de
|
|
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
A caveat is that some allocations are memdup_user() and they return an
error pointer instead of NULL. Those need special cares and the value
has to be cleared with no_free_ptr() at the allocation error path.
Other than that, the conversions are straightforward.
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240222111509.28390-4-tiwai@suse.de
|
|
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
A caveat is that some allocations are memdup_user() and they return an
error pointer instead of NULL. Those need special cares and the value
has to be cleared with no_free_ptr() at the allocation error path.
Other than that, the conversions are straightforward.
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240222111509.28390-3-tiwai@suse.de
|
|
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
A caveat is that some allocations are memdup_user() and they return an
error pointer instead of NULL. Those need special cares and the value
has to be cleared with no_free_ptr() at the allocation error path.
Other than that, the conversions are straightforward.
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240222111509.28390-2-tiwai@suse.de
|
|
Return used most significant bits from sample bit-width rather than the whole
physical sample word size. The starting bit offset is defined in the format
itself.
The behaviour is not changed for 32-bit formats like S32_LE. But with this
change - msbits value 24 instead 32 is returned for 24-bit formats like S24_LE
etc.
Also, commit 2112aa034907 ("ALSA: pcm: Introduce MSBITS subformat interface")
compares sample bit-width not physical sample bit-width to reset MSBITS_MAX bit
from the subformat bitmask.
Probably no applications are using msbits value for other than S32_LE/U32_LE
formats, because no drivers are reducing msbits value for other formats (with
the msb offset) at the moment.
For sanity, increase PCM protocol version, letting the user space to detect
the changed behaviour.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240222173649.1447549-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_soc_is_matching_dai() checks DAI name, which is paired function
with snd_soc_dai_name_get().
It checks dlc->dai_name and dai->name (A) or dai->driver_name (B) or
dai->component->name (C)
static int snd_soc_is_matching_dai(...)
{
...
if (strcmp(dlc->dai_name, dai->name) == 0)
~~~~~~~~~~~~~ ^^^^^^^^^(A)
if (...
strcmp(dai->driver->name, dlc->dai_name) == 0)
(B)^^^^^^^^^^^^^^^^ ~~~~~~~~~~~~~
if (...
strcmp(dlc->dai_name, dai->component->name) == 0)
~~~~~~~~~~~~~ ^^^^^^^^^^^^^^^^^^(C)
...
}
But (B) part order is different with (A) and (C) (= ^^^^ and ~~~~).
This is not a big deal, but confusable to read. Fixup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87wmqxjbcg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Modify ACP63_REG_END macro to access all ACP registers.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240222102656.631144-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To align with AMD SoundWire manager driver license, update license as
GPL-2.0-only for Pink Sardine ACP PCI driver and corresponding child
drivers.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240222102656.631144-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Both snd_seq_prioq_remove_events() and snd_seq_prioq_leave() have a
very similar loop for removing events. Unify them with a callback for
code simplification.
Only the code refactoring, and no functional changes.
Link: https://lore.kernel.org/r/20240222132152.29063-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The beep->mutex is no longer used since the drop of beep_mode=2.
Let's get rid of it.
Fixes: 0920c9b4c4d8 ("ALSA: hda - Remove beep_mode=2")
Link: https://lore.kernel.org/r/20240222153148.19691-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The variable clock is being assigned a value that is never read,
it is being re-assigned a new value in every case in the following
switch statement. The assignment is redundant and can be removed.
Cleans up clang scan build warning:
sound/pci/echoaudio/echoaudio_3g.c:277:2: warning: Value stored
to 'clock' is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240221113809.3410109-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Most of clk_xxx() functions do check if provided clk-pointer is
non-NULL. These do not check if the pointer is an error-pointer.
Providing such to a clk_xxx() results in a panic.
By utilizing _optional() variant of devm_clk_get() the driver code is
both simplified and more robust. There is no need to remember about
IS_ERR(clk) checks each time mclk is accessed.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240221152516.852353-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Most of clk_xxx() functions do check if provided clk-pointer is
non-NULL. These do not check if the pointer is an error-pointer.
Providing such to a clk_xxx() results in a panic.
rt5640_set_dai_sysclk() is an example of that - clk_set_rate() is not
guarded by IS_ERR().
By utilizing _optional() variant of devm_clk_get() the driver code is
both simplified and more robust. There is no need to remember about
IS_ERR(clk) checks each time mclk is accessed.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240221152516.852353-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Most of clk_xxx() functions do check if provided clk-pointer is
non-NULL. These do not check if the pointer is an error-pointer.
Providing such to a clk_xxx() results in a panic.
By utilizing _optional() variant of devm_clk_get() the driver code is
both simplified and more robust. There is no need to remember about
IS_ERR(clk) checks each time mclk is accessed.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240221152516.852353-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Most of clk_xxx() functions do check if provided clk-pointer is
non-NULL. These do not check if the pointer is an error-pointer.
Providing such to a clk_xxx() results in a panic.
By utilizing _optional() variant of devm_clk_get() the driver code is
both simplified and more robust. There is no need to remember about
IS_ERR(clk) checks each time mclk is accessed.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240221152516.852353-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Most of clk_xxx() functions do check if provided clk-pointer is
non-NULL. These do not check if the pointer is an error-pointer.
Providing such to a clk_xxx() results in a panic.
By utilizing _optional() variant of devm_clk_get() the driver code is
both simplified and more robust. There is no need to remember about
IS_ERR(clk) checks each time mclk is accessed.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240221152516.852353-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Most of clk_xxx() functions do check if provided clk-pointer is
non-NULL. These do not check if the pointer is an error-pointer.
Providing such to a clk_xxx() results in a panic.
By utilizing _optional() variant of devm_clk_get() the driver code is
both simplified and more robust. There is no need to remember about
IS_ERR(clk) checks each time mclk is accessed.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240221152516.852353-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the case where __lpass_get_dmactl_handle is called and the driver
id dai_id is invalid the pointer dmactl is not being assigned a value,
and dmactl contains a garbage value since it has not been initialized
and so the null check may not work. Fix this to initialize dmactl to
NULL. One could argue that modern compilers will set this to zero, but
it is useful to keep this initialized as per the same way in functions
__lpass_platform_codec_intf_init and lpass_cdc_dma_daiops_hw_params.
Cleans up clang scan build warning:
sound/soc/qcom/lpass-cdc-dma.c:275:7: warning: Branch condition
evaluates to a garbage value [core.uninitialized.Branch]
Fixes: b81af585ea54 ("ASoC: qcom: Add lpass CPU driver for codec dma control")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://msgid.link/r/20240221134804.3475989-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On some boards with multiple WSA8840/WSA8845 speakers, the reset
(shutdown) GPIO is shared between two speakers. Use the reset
controller framework and its "reset-gpio" driver to handle this case.
This allows bring-up and proper handling of all WSA884x speakers on
X1E80100-CRD board.
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240129115216.96479-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On newer Qualcomm platforms, like X1E80100-CRD, the WSA884x speakers
share SD_N GPIOs between two speakers, thus a coordinated assertion is
needed. Linux supports handling shared GPIO lines through "reset-gpios"
property, thus allow specifying either powerdown or reset GPIOs (these
are the same).
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Sean Anderson <sean.anderson@seco.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240129115216.96479-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull 6.8-rc devel branch. The trivial merge conflict got resolved.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The HP mt440 Thin Client uses an ALC236 codec and needs the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make the mute and
micmute LEDs work.
There are two variants of the USB-C PD chip on this device. Each uses
a different BIOS and board ID, hence the two entries.
Signed-off-by: Eniac Zhang <eniac-xw.zhang@hp.com>
Signed-off-by: Alexandru Gagniuc <alexandru.gagniuc@hp.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240220175812.782687-1-alexandru.gagniuc@hp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When BDL table entry overflow happens, the driver spews an error
message explicitly. But basically this condition can be triggered
easily by an application and it may flood of error logs
unnecessarily.
Downgrade the error message with dev_dbg() as a debug message
instead.
Link: https://lore.kernel.org/r/20240221100607.6565-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
So far the setup of BDL table is performed at the prepare stage, where
all PCM parameters have been already set up. When something wrong
happens at it, we return -EINVAL; it's supposed to be a rare case
since the involved memory allocation is a small chunk of kmalloc for
the table.
However, when we receive too many small non-contiguous pages in highly
fragmented memories, it may overflow the max table size, resulting in
the same -EINVAL error from the prepare, too. A bad scenario is that
user-space cannot know what went wrong (as it's an error from the
prepare stage) and -EINVAL, hence it may retry with the same
parameters, failing again repeatedly.
In this patch, we try to set up the BDL table at hw_params right after
the buffer allocation, and return -ENOMEM if it overflows.
This allows user-space knowing that it should reduce the buffer size
request accordingly and may retry with more fitting parameters.
Link: https://lore.kernel.org/r/20240221100607.6565-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We forgot to remove the line for snd-rtctimer from Makefile while
dropping the functionality. Get rid of the stale line.
Fixes: 34ce71a96dcb ("ALSA: timer: remove legacy rtctimer")
Link: https://lore.kernel.org/r/20240221092156.28695-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The avs-driver continues to be utilized on more recent Intel machines.
As TGL-based (cAVS 2.5) e.g.: RPL, inherit most of the functionality
from previous platforms:
SKL <- APL <- CNL <- ICL <- TGL
rather than putting everything into a single file, the platform-specific
bits are split into cnl/icl/tgl.c files instead. Makes the division clear
and code easier to maintain.
Layout of the patchset:
First are two changes combined together address the sound-clipping
problem, present when only one stream is running - specifically one
CAPTURE stream.
Follow up is naming-scheme adjustment for some of the existing functions
what improves code incohesiveness. As existing IPC/IRQ code operates
solely on cAVS 1.5 architecture, it needs no abstraction. The situation
changes when newer platforms come into the picture. Thus the next two
patches abstract the existing IPC/IRQ handlers so that majority of the
common code can be re-used.
The ICCMAX change stands out a bit - the AudioDSP firmware loading
procedure differs on ICL-based platforms (and onwards) and having a
separate commit makes the situation clear to the developers who are
going to support the solution from LTS perspective. For that reason
I decided not to merge it into the commit introducing the icl.c file.
|
|
snd_ump_legacy_open() didn't return the error code properly even if it
couldn't open. Fix it.
Fixes: 0b5288f5fe63 ("ALSA: ump: Add legacy raw MIDI support")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240220150843.28630-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
