| Age | Commit message (Collapse) | Author |
|---|
|
Add another bits helper to regmap API: this one sets given bits if value
is true and clears them if it's false.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patch.msgid.link/20241108-assign-bits-v1-1-382790562d99@ideasonboard.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In case of error in gtdt_parse_timer_block() invalid 'gtdt_frame'
will be used in 'do {} while (i-- >= 0 && gtdt_frame--);' statement block
because do{} block will be executed even if 'i == 0'.
Adjust error handling procedure by replacing 'i-- >= 0' with 'i-- > 0'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a712c3ed9b8a ("acpi/arm64: Add memory-mapped timer support in GTDT driver")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://lore.kernel.org/r/20240827101239.22020-1-amishin@t-argos.ru
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
exynos3250_jpeg_operating() has been unused since it was added in 2014's
commit 3246fdaa0ac2 ("[media] s5p-jpeg: Add support for Exynos3250 SoC")
exynos4_jpeg_get_fifo_status(), exynos4_jpeg_get_frame_size(), and
exynos4_jpeg_set_timer_count() have been unused since they were added by
commit 80529ae5c137 ("[media] s5p-jpeg: JPEG codec")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
This commit describes the hardware layout for the MSM8953
for the following hardware blocks:
- 2 x VFE, 3 RDI per VFE
- 3 x CSID
- 3 x CSI PHY
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add bindings for qcom,msm8953-camss in order to support the camera
subsystem for MSM8953.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
MSM8917 and MSM8953 have multiple VFE power-domains they
have to be powered on/off explicitly.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
fimc_md_is_isp_available
In fimc_md_is_isp_available(), of_get_child_by_name() is called to check
if FIMC-IS is available. Current code does not decrement the refcount of
the returned device node, which causes an OF node reference leak. Fix it
by calling of_node_put() at the end of the variable scope.
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Fixes: e781bbe3fecf ("[media] exynos4-is: Add fimc-is subdevs registration")
Cc: stable@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: added CC to stable]
|
|
According to adv7180.yaml, the correct property name is
"adi,force-bt656-4".
Expand the check to also test against the "adi,force-bt656-4" compatible
string.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The "adv,force-bt656-4" property causes several dt-schema warnings
because 'adv' is not a valid vendor prefix defined in
vendor-prefixes.yaml:
'adv,force-bt656-4' does not match any of the regexes: '^#.*'...
The correct vendor prefix for Analog Devices is 'adi', so change
the property name to 'adi,force-bt656-4'.
Keep the old property for old DTB compatibility and mark it as deprecated.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Fixes broken output due to different input/output alignment in loopback
mode when the (last) input device is closed. Instead of on device close,
do the alignment synchronisation when starting the stream (and clear
it when streaming is stopped).
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The old hans.verkuil@cisco.com email address was discontinued years ago.
Replace it with the correct hansverk@cisco.com email.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Clearly state that the V4L2_CID_MIN_BUFFERS_FOR_OUTPUT and
V4L2_CID_MIN_BUFFERS_FOR_CAPTURE controls are required for
stateful codecs.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Stateful codecs must support the V4L2_CID_MIN_BUFFERS_FOR_OUTPUT
and V4L2_CID_MIN_BUFFERS_FOR_CAPTURE controls. The vicodec driver
was missing support for these controls. Add them.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
GCC and Clang both implement stack protector support based on Thread Local
Storage (TLS) variables, and this is used in the kernel to implement per-task
stack cookies, by copying a task's stack cookie into a per-CPU variable every
time it is scheduled in.
Both now also implement -mstack-protector-guard-symbol=, which permits the TLS
variable to be specified directly. This is useful because it will allow to
move away from using a fixed offset of 40 bytes into the per-CPU area on
x86_64, which requires a lot of special handling in the per-CPU code and the
runtime relocation code.
However, while GCC is rather lax in its implementation of this command line
option, Clang actually requires that the provided symbol name refers to a TLS
variable (i.e., one declared with __thread), although it also permits the
variable to be undeclared entirely, in which case it will use an implicit
declaration of the right type.
The upshot of this is that Clang will emit the correct references to the stack
cookie variable in most cases, e.g.,
10d: 64 a1 00 00 00 00 mov %fs:0x0,%eax
10f: R_386_32 __stack_chk_guard
However, if a non-TLS definition of the symbol in question is visible in the
same compilation unit (which amounts to the whole of vmlinux if LTO is
enabled), it will drop the per-CPU prefix and emit a load from a bogus
address.
Work around this by using a symbol name that never occurs in C code, and emit
it as an alias in the linker script.
Fixes: 3fb0fdb3bbe7 ("x86/stackprotector/32: Make the canary into a regular percpu variable")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1854
Link: https://lore.kernel.org/r/20241105155801.1779119-2-brgerst@gmail.com
|
|
Hide KVM's pt_mode module param behind CONFIG_BROKEN, i.e. disable support
for virtualizing Intel PT via guest/host mode unless BROKEN=y. There are
myriad bugs in the implementation, some of which are fatal to the guest,
and others which put the stability and health of the host at risk.
For guest fatalities, the most glaring issue is that KVM fails to ensure
tracing is disabled, and *stays* disabled prior to VM-Enter, which is
necessary as hardware disallows loading (the guest's) RTIT_CTL if tracing
is enabled (enforced via a VMX consistency check). Per the SDM:
If the logical processor is operating with Intel PT enabled (if
IA32_RTIT_CTL.TraceEn = 1) at the time of VM entry, the "load
IA32_RTIT_CTL" VM-entry control must be 0.
On the host side, KVM doesn't validate the guest CPUID configuration
provided by userspace, and even worse, uses the guest configuration to
decide what MSRs to save/load at VM-Enter and VM-Exit. E.g. configuring
guest CPUID to enumerate more address ranges than are supported in hardware
will result in KVM trying to passthrough, save, and load non-existent MSRs,
which generates a variety of WARNs, ToPA ERRORs in the host, a potential
deadlock, etc.
Fixes: f99e3daf94ff ("KVM: x86: Add Intel PT virtualization work mode")
Cc: stable@vger.kernel.org
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241101185031.1799556-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Always set irr_pending (to true) when updating APICv status to fix a bug
where KVM fails to set irr_pending when userspace sets APIC state and
APICv is disabled, which ultimate results in KVM failing to inject the
pending interrupt(s) that userspace stuffed into the vIRR, until another
interrupt happens to be emulated by KVM.
Only the APICv-disabled case is flawed, as KVM forces apic->irr_pending to
be true if APICv is enabled, because not all vIRR updates will be visible
to KVM.
Hit the bug with a big hammer, even though strictly speaking KVM can scan
the vIRR and set/clear irr_pending as appropriate for this specific case.
The bug was introduced by commit 755c2bf87860 ("KVM: x86: lapic: don't
touch irr_pending in kvm_apic_update_apicv when inhibiting it"), which as
the shortlog suggests, deleted code that updated irr_pending.
Before that commit, kvm_apic_update_apicv() did indeed scan the vIRR, with
with the crucial difference that kvm_apic_update_apicv() did the scan even
when APICv was being *disabled*, e.g. due to an AVIC inhibition.
struct kvm_lapic *apic = vcpu->arch.apic;
if (vcpu->arch.apicv_active) {
/* irr_pending is always true when apicv is activated. */
apic->irr_pending = true;
apic->isr_count = 1;
} else {
apic->irr_pending = (apic_search_irr(apic) != -1);
apic->isr_count = count_vectors(apic->regs + APIC_ISR);
}
And _that_ bug (clearing irr_pending) was introduced by commit b26a695a1d78
("kvm: lapic: Introduce APICv update helper function"), prior to which KVM
unconditionally set irr_pending to true in kvm_apic_set_state(), i.e.
assumed that the new virtual APIC state could have a pending IRQ.
Furthermore, in addition to introducing this issue, commit 755c2bf87860
also papered over the underlying bug: KVM doesn't ensure CPUs and devices
see APICv as disabled prior to searching the IRR. Waiting until KVM
emulates an EOI to update irr_pending "works", but only because KVM won't
emulate EOI until after refresh_apicv_exec_ctrl(), and there are plenty of
memory barriers in between. I.e. leaving irr_pending set is basically
hacking around bad ordering.
So, effectively revert to the pre-b26a695a1d78 behavior for state restore,
even though it's sub-optimal if no IRQs are pending, in order to provide a
minimal fix, but leave behind a FIXME to document the ugliness. With luck,
the ordering issue will be fixed and the mess will be cleaned up in the
not-too-distant future.
Fixes: 755c2bf87860 ("KVM: x86: lapic: don't touch irr_pending in kvm_apic_update_apicv when inhibiting it")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Reported-by: Yong He <zhuangel570@gmail.com>
Closes: https://lkml.kernel.org/r/20241023124527.1092810-1-alexyonghe%40tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20241106015135.2462147-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Ensure that snp gctx page allocation is adequately deallocated on
failure during snp_launch_start.
Fixes: 136d8bc931c8 ("KVM: SEV: Add KVM_SEV_SNP_LAUNCH_START command")
CC: Sean Christopherson <seanjc@google.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Borislav Petkov <bp@alien8.de>
CC: Dave Hansen <dave.hansen@linux.intel.com>
CC: Ashish Kalra <ashish.kalra@amd.com>
CC: Tom Lendacky <thomas.lendacky@amd.com>
CC: John Allen <john.allen@amd.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: "David S. Miller" <davem@davemloft.net>
CC: Michael Roth <michael.roth@amd.com>
CC: Luis Chamberlain <mcgrof@kernel.org>
CC: Russ Weight <russ.weight@linux.dev>
CC: Danilo Krummrich <dakr@redhat.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: "Rafael J. Wysocki" <rafael@kernel.org>
CC: Tianfei zhang <tianfei.zhang@intel.com>
CC: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Message-ID: <20241105010558.1266699-2-dionnaglaze@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In 08a7d2525511 ("tools arch x86: Sync the msr-index.h copy with the
kernel sources"), VMX_BASIC_MEM_TYPE_WB was removed. Use X86_MEMTYPE_WB
instead.
Fixes: 08a7d2525511 ("tools arch x86: Sync the msr-index.h copy with the
kernel sources")
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Message-ID: <20241106034031.503291-1-jsperbeck@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM x86 and selftests fixes for 6.12:
- Increase the timeout for the memslot performance selftest to avoid false
failures on arm64 and nested x86 platforms.
- Fix a goof in the guest_memfd selftest where a for-loop initialized a
bit mask to zero instead of BIT(0).
- Disable strict aliasing when building KVM selftests to prevent the
compiler from treating things like "u64 *" to "uint64_t *" cases as
undefined behavior, which can lead to nasty, hard to debug failures.
- Force -march=x86-64-v2 for KVM x86 selftests if and only if the uarch
is supported by the compiler.
- When emulating a guest TLB flush for a nested guest, flush vpid01, not
vpid02, if L2 is active but VPID is disabled in vmcs12, i.e. if L2 and
L1 are sharing VPID '0' (from L1's perspective).
- Fix a bug in the SNP initialization flow where KVM would return '0' to
userspace instead of -errno on failure.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.12
A moderately large pile of small changes here, split fairly evenly
between fixes and ID additions/quirks and all of it driver specific.
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 6.12-rc7
Here's a fix for a long-standing use-after-free in an io_edgeport debug
printk and some new modem device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.12-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: qcserial: add support for Sierra Wireless EM86xx
USB: serial: io_edgeport: fix use after free in debug printk
USB: serial: option: add Quectel RG650V
USB: serial: option: add Fibocom FG132 0x0112 composition
|
|
This fixes an assertion pop where we try to navigate to the target of
the backpointer, and the path level isn't what we expect.
Reported-by: syzbot+b17df21b4d370f2dc330@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add NETIF_F_GSO_ESP bit to bond's gso_partial_features if all slaves
support it, such that ESP segmentation is handled by hardware if possible.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241105192721.584822-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Donald Hunter says:
====================
netlink: specs: Add neigh and rule YNL specs
Add YNL specs for the FDB neighbour tables and FIB rules from the
rtnelink families.
Example usage:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_neigh.yaml \
--dump getneigh
[{'cacheinfo': {'confirmed': 122664055,
'refcnt': 0,
'updated': 122658055,
'used': 122658055},
'dst': '0.0.0.0',
'family': 2,
'flags': set(),
'ifindex': 5,
'lladr': '',
'probes': 0,
'state': {'noarp'},
'type': 'broadcast'},
...]
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_rule.yaml \
--dump getrule --json '{"family": 2}'
[{'action': 'to-tbl',
'dst-len': 0,
'family': 2,
'flags': 0,
'protocol': 2,
'src-len': 0,
'suppress-prefixlen': '0xffffffff',
'table': 255,
'tos': 0},
... ]
====================
Link: https://patch.msgid.link/20241106090718.64713-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a YNL spec for FIB rules:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_rule.yaml \
--dump getrule --json '{"family": 2}'
[{'action': 'to-tbl',
'dst-len': 0,
'family': 2,
'flags': 0,
'protocol': 2,
'src-len': 0,
'suppress-prefixlen': '0xffffffff',
'table': 255,
'tos': 0},
... ]
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20241106090718.64713-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a YNL spec for neighbour tables and neighbour entries in rtnetlink.
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_neigh.yaml \
--dump getneigh
[{'cacheinfo': {'confirmed': 122664055,
'refcnt': 0,
'updated': 122658055,
'used': 122658055},
'dst': '0.0.0.0',
'family': 2,
'flags': set(),
'ifindex': 5,
'lladr': '',
'probes': 0,
'state': {'noarp'},
'type': 'broadcast'},
...]
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20241106090718.64713-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Calling synchronize_rcu() while holding rcu_read_lock() is not
permitted [1]
Move the synchronize_rcu() + dev_put() to route_doit().
Alternative would be to not use rcu_read_lock() in route_doit().
[1]
WARNING: suspicious RCU usage
6.12.0-rc5-syzkaller-01056-gf07a6e6ceb05 #0 Not tainted
-----------------------------
kernel/rcu/tree.c:4092 Illegal synchronize_rcu() in RCU read-side critical section!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz-executor427/5840:
#0: ffffffff8e937da0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:337 [inline]
#0: ffffffff8e937da0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:849 [inline]
#0: ffffffff8e937da0 (rcu_read_lock){....}-{1:2}, at: route_doit+0x3d6/0x640 net/phonet/pn_netlink.c:264
stack backtrace:
CPU: 1 UID: 0 PID: 5840 Comm: syz-executor427 Not tainted 6.12.0-rc5-syzkaller-01056-gf07a6e6ceb05 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
lockdep_rcu_suspicious+0x226/0x340 kernel/locking/lockdep.c:6821
synchronize_rcu+0xea/0x360 kernel/rcu/tree.c:4089
phonet_route_del+0xc6/0x140 net/phonet/pn_dev.c:409
route_doit+0x514/0x640 net/phonet/pn_netlink.c:275
rtnetlink_rcv_msg+0x791/0xcf0 net/core/rtnetlink.c:6790
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2551
netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline]
netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1357
netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1901
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:744
sock_write_iter+0x2d7/0x3f0 net/socket.c:1165
new_sync_write fs/read_write.c:590 [inline]
vfs_write+0xaeb/0xd30 fs/read_write.c:683
ksys_write+0x183/0x2b0 fs/read_write.c:736
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 17a1ac0018ae ("phonet: Don't hold RTNL for route_doit().")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Remi Denis-Courmont <courmisch@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20241106131818.1240710-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the "tos" parameter of ip_route_output() to dscp_t. This way
we'll have a dscp_t value directly available when .flowi4_tos will
eventually be converted to dscp_t.
All ip_route_output() callers but one set this "tos" parameter to 0 and
therefore don't need to be adapted to the new prototype.
Only br_nf_pre_routing_finish() needs conversion. It can just use
ip4h_dscp() to get the DSCP field from the IPv4 header.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/0f10d031dd44c70aae9bc6e19391cb30d5c2fe71.1730928699.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Needs to match the assert later when we resize...
Reported-by: syzbot+e8eff054face85d7ea41@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The write buffer needs to be specifically flushed when going RO: keys in
the journal that haven't yet been moved to the write buffer don't have a
journal pin yet.
This fixes numerous syzbot bugs, all with symptoms of still doing writes
after we've got RO.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Heiner Kallweit says:
====================
net: phy: remove genphy_config_eee_advert
This series removes genphy_config_eee_advert().
Note: The change to bcm_config_lre_aneg() is compile-tested only
as I don't have supported hardware.
====================
Link: https://patch.msgid.link/69d22b31-57d1-4b01-bfde-0c6a1df1e310@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bcm_config_lre_aneg() doesn't use genphy_config_eee_advert() any longer.
As this was the only user, we can remove genphy_config_eee_advert() now.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/37da7f3e-b883-4c07-9881-b8c0516822b7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bcm_config_lre_aneg() is the only user of genphy_config_eee_advert(),
therefore use genphy_c45_an_config_eee_aneg() instead. The resulting
functionality is equivalent, and bcm_config_lre_aneg() follows the
structure of __genphy_config_aneg().
In a follow-up step genphy_config_eee_advert() can be removed.
Note: We preserve the current behavior to ignore errors.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/6e5cd4ab-28bb-4d82-b449-fec85f3d1e8a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We'll use this function in bcm_config_lre_aneg(), therefore export it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/02bd7c39-7413-4433-bafc-a276089bd292@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
genphy_c45_write_eee_adv() isn't used outside phy-c45.c,
so make it static.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/d23bd784-44e6-4a15-af3a-b37379156521@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.12-2024-11-07:
amdgpu:
- Brightness fix
- DC vbios parsing fix
- ACPI fix
- SMU 14.x fix
- Power workload profile fix
- GC partitioning fix
- Debugfs fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241107182722.14147-1-alexander.deucher@amd.com
|
|
In the past couple years, Yu Kuai has been making solid contributions
to md/raid subsystem. Make Yu Kuai a co-maintainer.
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20241108014112.2098079-1-song@kernel.org
Signed-off-by: Song Liu <song@kernel.org>
|
|
When the LLC and NUMA domains fully overlap, enabling both optimizations
in the built-in idle CPU selection policy is redundant, as it leads to
searching for an idle CPU within the same domain twice.
Likewise, if all online CPUs are within a single LLC domain, LLC
optimization is unnecessary.
Therefore, detect overlapping domains and enable topology optimizations
only when necessary.
Moreover, rely on the online CPUs for this detection logic, instead of
using the possible CPUs.
Fixes: 860a45219bce ("sched_ext: Introduce NUMA awareness to the default idle selection policy")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
One customer reports a bug: raid5 is hung when changing thread cnt
while resync is running. The stripes are all in conf->handle_list
and new threads can't handle them.
Commit b39f35ebe86d ("md: don't quiesce in mddev_suspend()") removes
pers->quiesce from mddev_suspend/resume. Before this patch, mddev_suspend
needs to wait for all ios including sync io to finish. Now it's used
to only wait normal io.
Fix this by calling raid5_quiesce from raid5_store_group_thread_cnt
directly to wait all sync requests to finish before changing the group
cnt.
Fixes: b39f35ebe86d ("md: don't quiesce in mddev_suspend()")
Cc: stable@vger.kernel.org
Signed-off-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20241106095124.74577-1-xni@redhat.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
elevator_init_mq() is only called at the entry of add_disk_fwnode() when
disk IO isn't allowed yet.
So not verify io lock(q->io_lockdep_map) for freeze & unfreeze in
elevator_init_mq().
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Lai Yi <yi1.lai@linux.intel.com>
Fixes: f1be1788a32e ("block: model freeze & enter queue as lock for supporting lockdep")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241031133723.303835-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
commit f1be1788a32e ("block: model freeze & enter queue as lock for
supporting lockdep") tries to apply lockdep for verifying freeze &
unfreeze. However, the verification is only done the outmost freeze and
unfreeze. This way is actually not correct because q->mq_freeze_depth
still may drop to zero on other task instead of the freeze owner task.
Fix this issue by always verifying the last unfreeze lock on the owner
task context, and make sure both the outmost freeze & unfreeze are
verified in the current task.
Fixes: f1be1788a32e ("block: model freeze & enter queue as lock for supporting lockdep")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241031133723.303835-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Unfreeze queue after returning from blk_mark_disk_dead(), this way at
least allows us to verify queue freeze correctly with lockdep.
Suggested-by: Christoph Hellwig <hch@lst.de>
Cc: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241031133723.303835-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No one use blk_freeze_queue(), so remove it and the obsolete comment.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241031133723.303835-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"An update for the maintainers of the AMD driver following some job
changes there"
* tag 'spi-fix-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
MAINTAINERS: update AMD SPI maintainer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of small fixes for drivers, nothing particularly remarkable"
* tag 'regulator-fix-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rk808: Add apply_bit for BUCK3 on RK809
regulator: rtq2208: Fix uninitialized use of regulator_config
|
|
Turn the private disk_zone_is_conv() function in blk-zoned.c into a
public and documented bdev_zone_is_seq() helper with the inverse
polarity of the original function, also adding a check for non-zoned
devices so that all file systems can use the helper, even with a regular
block device.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241107064300.227731-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Ensure that a disk revalidation changing the conventional zones bitmap
of a disk does not cause invalid memory references when using the
disk_zone_is_conv() helper by RCU protecting the disk->conv_zones_bitmap
pointer.
disk_zone_is_conv() is modified to operate under the RCU read lock and
the function disk_set_conv_zones_bitmap() is added to update a disk
conv_zones_bitmap pointer using rcu_replace_pointer() with the disk
zone_wplugs_lock spinlock held.
disk_free_zone_resources() is modified to call
disk_update_zone_resources() with a NULL bitmap pointer to free the disk
conv_zones_bitmap. disk_set_conv_zones_bitmap() is also used in
disk_update_zone_resources() to set the new (revalidated) bitmap and
free the old one.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241107064300.227731-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Per Documentation/filesystems/sysfs.rst, show() should only use
sysfs_emit() or sysfs_emit_at() when formatting the value to be
returned to user space.
No functional change intended.
Signed-off-by: zhangguopeng <zhangguopeng@kylinos.cn>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241107104258.29742-1-zhangguopeng@kylinos.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The following pattern becomes more and more:
+ io_req_assign_rsrc_node(&req->buf_node, node);
+ req->flags |= REQ_F_BUF_NODE;
so make it a helper, which is less fragile to use than above code, for
example, the BUF_NODE flag is even missed in current io_uring_cmd_prep().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241107110149.890530-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove '->ctx_ptr' of 'struct io_rsrc_node', and add 'type' field,
meantime remove io_rsrc_node_type().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241107110149.890530-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
