| Age | Commit message (Collapse) | Author |
|---|
|
https://github.com/Broadcom/stblinux into soc/defconfig
This pull request contains Broadcom ARM64-based SoCs defconfig updates
for 6.14, please pull the following:
- Stefan enables the pinctrl-based I2C mux driver which is used on
Raspberry Pi 4 based systems since we switched the Device Tree files
to use the i2c mux representation
* tag 'arm-soc/for-6.14/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: Enable pinctrl-based I2C mux
Link: https://lore.kernel.org/r/20250123203302.1491843-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
fuse-over-io-uring uses existing functions to find requests based
on their unique id - make these functions non-static.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Add special fuse-io-uring into the fuse argument
copy handler.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Move 'struct fuse_copy_state' and fuse_copy_* functions
to fuse_dev_i.h to make it available for fuse-io-uring.
'copy_out_args()' is renamed to 'fuse_copy_out_args'.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD).
For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue
entries.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This change sets up FUSE operations to always have headers in
args.in_args[0], even for opcodes without an actual header.
This step prepares for a clean separation of payload from headers,
initially it is used by fuse-over-io-uring.
For opcodes without a header, we use a zero-sized struct as a
placeholder. This approach:
- Keeps things consistent across all FUSE operations
- Will help with payload alignment later
- Avoids future issues when header sizes change
Op codes that already have an op code specific header do not
need modification.
Op codes that have neither payload nor op code headers
are not modified either (FUSE_READLINK and FUSE_DESTROY).
FUSE_BATCH_FORGET already has the header in the right place,
but is not using fuse_copy_args - as -over-uring is currently
not handling forgets it does not matter for now, but header
separation will later need special attention for that op code.
Correct the struct fuse_args->in_args array max size.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
[Add several documentation updates I had missed after
renaming functions and also fixes 'make htmldocs'.]
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
These are needed by fuse-over-io-uring.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Another preparation patch, as this function will be needed by
fuse/dev.c and fuse/dev_uring.c.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This function is needed by fuse_uring.c to clean ring queues,
so make it non static. Especially in non-static mode the function
name 'end_requests' should be prefixed with fuse_
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Short summary of fixes pull:
bochs:
- Fix double-free on driver removal
client:
- Improve support for tile-based modes
- Fix fbdev Kconfig select rules
xlnx:
- zynqmp_dp: Add locking to DP-bridge enable helper
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124082932.GA13715@linux.fritz.box
|
|
* Raw NAND changes
A new controller driver, from Nuvoton, has been merged.
Bastien Curutchet has contributed a series improving the Davinci
controller driver, both on the organization of the code, but also on the
performance side. The binding has also been converted to yaml, received
a new OOB layout and now supports on-die ECC engines.
The Qualcomm controller driver has been deeply cleaned to extract some
parts of the code into a shared file with the Qualcomm SPI memory
controller.
Aside from these main changes, the Cadence binding has been converted to
yaml, the brcmnand controller driver has received a small fix, otherwise
some more minor changes have also made their way in.
* SPI NAND changes
The SPI NAND subsystem has seen a great improvement, with the advent of
DTR operations (DDR operations, which may be extended to the address
cycles). The first vendor driver to benefit from these improvements is
the Winbond driver.
A new manufacturer driver is added SkyHigh, with a new constraint for
the core, it is impossible to disable the on-die ECC engine.
A Foresee device is also now supported.
|
|
SPI NOR changes for 6.14
Notable changes:
- Add flash entries for Atmel AT25SF321, Spansion S28HL256T, S28HL02GT.
- Add support for vcc-supply regulators and their DT bindings.
- Drop mx25u25635f entry. The flash shares its ID with mx25u25645g and
both parts have an SFDP table. Removing their entry lets them be
driven by the generic SFDP-based driver.
|
|
We added some locking to this function, but accidentally forgot to unlock
if zynqmp_dp_mode_configure() failed. Use a guard lock to fix it.
Fixes: a7d5eeaa57d7 ("drm: zynqmp_dp: Add locking")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b4042bd9-c943-4738-a2e1-8647259137c6@stanley.mountain
|
|
For the state cache lookup xfrm_input_state_lookup() first disables
preemption, to remain on the CPU and then retrieves a per-CPU pointer.
Within the preempt-disable section it also acquires
netns_xfrm::xfrm_state_lock, a spinlock_t. This lock must not be
acquired with explicit disabled preemption (such as by get_cpu())
because this lock becomes a sleeping lock on PREEMPT_RT.
To remain on the same CPU is just an optimisation for the CPU local
lookup. The actual modification of the per-CPU variable happens with
netns_xfrm::xfrm_state_lock acquired.
Remove get_cpu() and use the state_cache_input on the current CPU.
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Closes: https://lore.kernel.org/all/CAADnVQKkCLaj=roayH=Mjiiqz_svdf1tsC3OE4EC0E=mAD+L1A@mail.gmail.com/
Fixes: 81a331a0e72dd ("xfrm: Add an inbound percpu state cache.")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- scx_bpf_now() added so that BPF scheduler can access the cached
timestamp in struct rq to avoid reading TSC multiple times within a
locked scheduling operation.
- Minor updates to the built-in idle CPU selection logic.
- tool/sched_ext updates and other misc changes.
* tag 'sched_ext-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: fix kernel-doc warnings
sched_ext: Use time helpers in BPF schedulers
sched_ext: Replace bpf_ktime_get_ns() to scx_bpf_now()
sched_ext: Add time helpers for BPF schedulers
sched_ext: Add scx_bpf_now() for BPF scheduler
sched_ext: Implement scx_bpf_now()
sched_ext: Relocate scx_enabled() related code
sched_ext: Add option -l in selftest runner to list all available tests
sched_ext: Include remaining task time slice in error state dump
sched_ext: update scx_bpf_dsq_insert() doc for SCX_DSQ_LOCAL_ON
sched_ext: idle: small CPU iteration refactoring
sched_ext: idle: introduce check_builtin_idle_enabled() helper
sched_ext: idle: clarify comments
sched_ext: idle: use assign_cpu() to update the idle cpumask
sched_ext: Use str_enabled_disabled() helper in update_selcpu_topology()
sched_ext: Use sizeof_field for key_len in dsq_hash_params
tools/sched_ext: Receive updates from SCX repo
sched_ext: Use the NUMA scheduling domain for NUMA optimizations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull trace fing buffer fix from Steven Rostedt:
"Fix atomic64 operations on some architectures for the tracing ring
buffer:
- Have emulating atomic64 use arch_spin_locks instead of
raw_spin_locks
The tracing ring buffer events have a small timestamp that holds
the delta between itself and the event before it. But this can be
tricky to update when interrupts come in. It originally just set
the deltas to zero for events that interrupted the adding of
another event which made all the events in the interrupt have the
same timestamp as the event it interrupted. This was not suitable
for many tools, so it was eventually fixed. But that fix required
adding an atomic64 cmpxchg on the timestamp in cases where an event
was added while another event was in the process of being added.
Originally, for 32 bit architectures, the manipulation of the 64
bit timestamp was done by a structure that held multiple 32bit
words to hold parts of the timestamp and a counter. But as updates
to the ring buffer were done, maintaining this became too complex
and was replaced by the atomic64 generic operations which are now
used by both 64bit and 32bit architectures. Shortly after that, it
was reported that riscv32 and other 32 bit architectures that just
used the generic atomic64 were locking up. This was because the
generic atomic64 operations defined in lib/atomic64.c uses a
raw_spin_lock() to emulate an atomic64 operation. The problem here
was that raw_spin_lock() can also be traced by the function tracer
(which is commonly used for debugging raw spin locks). Since the
function tracer uses the tracing ring buffer, which now is being
traced internally, this was triggering a recursion and setting off
a warning that the spin locks were recusing.
There's no reason for the code that emulates atomic64 operations to
be using raw_spin_locks which have a lot of debugging
infrastructure attached to them (depending on the config options).
Instead it should be using the arch_spin_lock() which does not have
any infrastructure attached to them and is used by low level
infrastructure like RCU locks, lockdep and of course tracing. Using
arch_spin_lock()s fixes this issue.
- Do not trace in NMI if the architecture uses emulated atomic64
operations
Another issue with using the emulated atomic64 operations that uses
spin locks to emulate the atomic64 operations is that they cannot
be used in NMI context. As an NMI can trigger while holding the
atomic64 spin locks it can try to take the same lock and cause a
deadlock.
Have the ring buffer fail recording events if in NMI context and
the architecture uses the emulated atomic64 operations"
* tag 'trace-ringbuffer-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
atomic64: Use arch_spin_locks instead of raw_spin_locks
ring-buffer: Do not allow events in NMI with generic atomic64 cmpxchg()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull fgraph updates from Steven Rostedt:
"Remove calltime and rettime from fgraph infrastructure
The calltime and rettime were used by the function graph tracer to
calculate the timings of functions where it traced their entry and
exit. The calltime and rettime were stored in the generic structures
that were used for the mechanisms to add an entry and exit callback.
Now that function graph infrastructure is used by other subsystems
than just the tracer, the calltime and rettime are not needed for
them. Remove the calltime and rettime from the generic fgraph
infrastructure and have the callers that require them handle them"
* tag 'ftrace-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fgraph: Remove calltime and rettime from generic operations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in
the error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Update the Rust tracepoint code to use the C code too
There was some duplication of the tracepoint code for Rust that did
the same logic as the C code. Add a helper that makes it possible for
both algorithms to use the same logic in one place.
- Add poll to trace event hist files
It is useful to know when an event is triggered, or even with some
filtering. Since hist files of events get updated when active and the
event is triggered, allow applications to poll the hist file and wake
up when an event is triggered. This will let the application know
that the event it is waiting for happened.
- Add :mod: command to enable events for current or future modules
The function tracer already has a way to enable functions to be
traced in modules by writing ":mod:<module>" into set_ftrace_filter.
That will enable either all the functions for the module if it is
loaded, or if it is not, it will cache that command, and when the
module is loaded that matches <module>, its functions will be
enabled. This also allows init functions to be traced. But currently
events do not have that feature.
Add the command where if ':mod:<module>' is written into set_event,
then either all the modules events are enabled if it is loaded, or
cache it so that the module's events are enabled when it is loaded.
This also works from the kernel command line, where
"trace_event=:mod:<module>", when the module is loaded at boot up,
its events will be enabled then.
* tag 'trace-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
tracing: Fix output of set_event for some cached module events
tracing: Fix allocation of printing set_event file content
tracing: Rename update_cache() to update_mod_cache()
tracing: Fix #if CONFIG_MODULES to #ifdef CONFIG_MODULES
selftests/ftrace: Add test that tests event :mod: commands
tracing: Cache ":mod:" events for modules not loaded yet
tracing: Add :mod: command to enabled module events
selftests/tracing: Add hist poll() support test
tracing/hist: Support POLLPRI event for poll on histogram
tracing/hist: Add poll(POLLIN) support on hist file
tracing: Fix using ret variable in tracing_set_tracer()
tracepoint: Reduce duplication of __DO_TRACE_CALL
tracing/string: Create and use __free(argv_free) in trace_dynevent.c
tracing: Switch trace_stat.c code over to use guard()
tracing: Switch trace_stack.c code over to use guard()
tracing: Switch trace_osnoise.c code over to use guard() and __free()
tracing: Switch trace_events_synth.c code over to use guard()
tracing: Switch trace_events_filter.c code over to use guard()
tracing: Switch trace_events_trigger.c code over to use guard()
tracing: Switch trace_events_hist.c code over to use guard()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
- Fix use of KERNEL_VERSION in newly created output directory
If a new output directory is created (O=/dir), and one of the options
uses KERNEL_VERSION which will run a "make kernelversion" in the
output directory, it will fail because there is no config file yet.
In this case, have it do a "make allnoconfig" which is the minimal
needed to run the "make kernelversion".
- Remove unused variables
- Fix some typos
* tag 'ktest-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest.pl: Fix typo "accesing"
ktest.pl: Fix typo in comment
ktest.pl: Remove unused declarations in run_bisect_test function
ktest.pl: Check kernelrelease return in get_version
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- kprobes: Cleanups using guard() and __free(): Use cleanup.h macros to
cleanup code and remove all gotos from kprobes code.
- tracing/probes: Also cleanups tracing/*probe events code with guard()
and __free(). These patches are just to simplify the parser codes.
- kprobes: Reduce preempt disable scope in check_kprobe_access_safe()
This reduces preempt disable time to only when getting the module
refcount in check_kprobe_access_safe().
Previously it disabled preempt needlessly for other checks including
jump_label_text_reserved(), which took a long time because of the
linear search.
* tag 'probes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Simplify __trace_kprobe_create() by removing gotos
tracing: Use __free() for kprobe events to cleanup
tracing: Use __free() in trace_probe for cleanup
kprobes: Remove remaining gotos
kprobes: Remove unneeded goto
kprobes: Use guard for rcu_read_lock
kprobes: Use guard() for external locks
jump_label: Define guard() for jump_label_lock
tracing/eprobe: Adopt guard() and scoped_guard()
tracing/uprobe: Adopt guard() and scoped_guard()
tracing/kprobe: Adopt guard() and scoped_guard()
kprobes: Adopt guard() and scoped_guard()
kprobes: Reduce preempt disable scope in check_kprobe_access_safe()
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- Fix oops in DebugData when link speed 0
- Two reparse point fixes
- Ten DFS (global namespace) fixes
- Symlink error handling fix
- Two SMB1 fixes
- Four cleanup fixes
- Improved debugging of status codes
- Fix incorrect output of tracepoints for compounding, and add missing
compounding tracepoint
* tag 'v6.14-rc-smb3-client-fixes-part' of git://git.samba.org/sfrench/cifs-2.6: (23 commits)
smb: client: handle lack of EA support in smb2_query_path_info()
smb: client: don't check for @leaf_fullpath in match_server()
smb: client: get rid of TCP_Server_Info::refpath_lock
cifs: Remove duplicate struct reparse_symlink_data and SYMLINK_FLAG_RELATIVE
cifs: Do not attempt to call CIFSGetSrvInodeNumber() without CAP_INFOLEVEL_PASSTHRU
cifs: Do not attempt to call CIFSSMBRenameOpenFile() without CAP_INFOLEVEL_PASSTHRU
cifs: Remove declaration of dead CIFSSMBQuerySymLink function
cifs: Fix printing Status code into dmesg
cifs: Add missing NT_STATUS_* codes from nterr.h to nterr.c
cifs: Fix endian types in struct rfc1002_session_packet
cifs: Use cifs_autodisable_serverino() for disabling CIFS_MOUNT_SERVER_INUM in readdir.c
smb3: add missing tracepoint for querying wsl EAs
smb: client: fix order of arguments of tracepoints
smb: client: fix oops due to unset link speed
smb: client: correctly handle ErrorContextData as a flexible array
smb: client: don't retry DFS targets on server shutdown
smb: client: fix return value of parse_dfs_referrals()
smb: client: optimize referral walk on failed link targets
smb: client: provide dns_resolve_{unc,name} helpers
smb: client: parse DNS domain name from domain= option
...
|
|
Pull smb server updates from Steve French:
"Three ksmbd server fixes:
- Fix potential memory corruption in IPC calls
- Support FSCTL_QUERY_INTERFACE_INFO for more configurations
- Remove some unused functions"
* tag 'v6.14-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix integer overflows on 32 bit systems
ksmbd: browse interfaces list on FSCTL_QUERY_INTERFACE_INFO IOCTL
ksmbd: Remove unused functions
|
|
As reported by Namhyung Kim and acknowledged by Qiao Zhao (link:
https://lore.kernel.org/linux-perf-users/20241206001436.1947528-1-namhyung@kernel.org/),
on certain machines, perf trace failed to load the BPF program into the
kernel. The verifier runs perf trace's BPF program for up to 1 million
instructions, returning an E2BIG error, whereas the perf trace BPF
program should be much less complex than that. This patch aims to fix
the issue described above.
The E2BIG problem from clang-15 to clang-16 is cause by this line:
} else if (size < 0 && size >= -6) { /* buffer */
Specifically this check: size < 0. seems like clang generates a cool
optimization to this sign check that breaks things.
Making 'size' s64, and use
} else if ((int)size < 0 && size >= -6) { /* buffer */
Solves the problem. This is some Hogwarts magic.
And the unbounded access of clang-12 and clang-14 (clang-13 works this
time) is fixed by making variable 'aug_size' s64.
As for this:
-if (aug_size > TRACE_AUG_MAX_BUF)
- aug_size = TRACE_AUG_MAX_BUF;
+aug_size = args->args[index] > TRACE_AUG_MAX_BUF ? TRACE_AUG_MAX_BUF : args->args[index];
This makes the BPF skel generated by clang-18 work. Yes, new clangs
introduce problems too.
Sorry, I only know that it works, but I don't know how it works. I'm not
an expert in the BPF verifier. I really hope this is not a kernel
version issue, as that would make the test case (kernel_nr) *
(clang_nr), a true horror story. I will test it on more kernel versions
in the future.
Fixes: 395d38419f18: ("perf trace augmented_raw_syscalls: Add more check s to pass the verifier")
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241213023047.541218-1-howardchu95@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
There are some patches with long lines as a result of checkpatch
enforcing 100, not 80, but checkpatch is only a tool not a coding style.
The Linux Kernel Coding Style is still clear here on preferred limit.
Mentioned preferred style of wrapping long lines in DTS, based on Linux
Kernel Coding Style.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250118102247.18257-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify pre-content notification support from Jan Kara:
"This introduces a new fsnotify event (FS_PRE_ACCESS) that gets
generated before a file contents is accessed.
The event is synchronous so if there is listener for this event, the
kernel waits for reply. On success the execution continues as usual,
on failure we propagate the error to userspace. This allows userspace
to fill in file content on demand from slow storage. The context in
which the events are generated has been picked so that we don't hold
any locks and thus there's no risk of a deadlock for the userspace
handler.
The new pre-content event is available only for users with global
CAP_SYS_ADMIN capability (similarly to other parts of fanotify
functionality) and it is an administrator responsibility to make sure
the userspace event handler doesn't do stupid stuff that can DoS the
system.
Based on your feedback from the last submission, fsnotify code has
been improved and now file->f_mode encodes whether pre-content event
needs to be generated for the file so the fast path when nobody wants
pre-content event for the file just grows the additional file->f_mode
check. As a bonus this also removes the checks whether the old
FS_ACCESS event needs to be generated from the fast path. Also the
place where the event is generated during page fault has been moved so
now filemap_fault() generates the event if and only if there is no
uptodate folio in the page cache.
Also we have dropped FS_PRE_MODIFY event as current real-world users
of the pre-content functionality don't really use it so let's start
with the minimal useful feature set"
* tag 'fsnotify_hsm_for_v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (21 commits)
fanotify: Fix crash in fanotify_init(2)
fs: don't block write during exec on pre-content watched files
fs: enable pre-content events on supported file systems
ext4: add pre-content fsnotify hook for DAX faults
btrfs: disable defrag on pre-content watched files
xfs: add pre-content fsnotify hook for DAX faults
fsnotify: generate pre-content permission event on page fault
mm: don't allow huge faults for files with pre content watches
fanotify: disable readahead if we have pre-content watches
fanotify: allow to set errno in FAN_DENY permission response
fanotify: report file range info with pre-content events
fanotify: introduce FAN_PRE_ACCESS permission event
fsnotify: generate pre-content permission event on truncate
fsnotify: pass optional file access range in pre-content event
fsnotify: introduce pre-content permission events
fanotify: reserve event bit of deprecated FAN_DIR_MODIFY
fanotify: rename a misnamed constant
fanotify: don't skip extra event info if no info_mode is set
fsnotify: check if file is actually being watched for pre-content events on open
fsnotify: opt-in for permission events at file open time
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull isofs update from Jan Kara:
"Partial conversion of isofs to folios"
* tag 'fs_for_v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
isofs: Partially convert zisofs_read_folio to use a folio
|
|
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Link: https://lore.kernel.org/r/20250107131019.246517-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull inotify update from Jan Kara:
"A small inotify strcpy() cleanup"
* tag 'fsnotify_for_v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
inotify: Use strscpy() for event->name copies
|
|
Pull XFS updates from Carlos Maiolino:
"This is mostly focused on the implementation of reflink and
reverse-mapping support for XFS's real-time devices.
It also includes several bugfixes.
- Implement reflink support for the realtime device
- Implement reverse-mapping support for the realtime device
- Several bug fixes and cleanups"
* tag 'xfs-merge-6.14' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (121 commits)
xfs: fix buffer lookup vs release race
xfs: check for dead buffers in xfs_buf_find_insert
xfs: add a b_iodone callback to struct xfs_buf
xfs: move b_li_list based retry handling to common code
xfs: simplify xfsaild_resubmit_item
xfs: always complete the buffer inline in xfs_buf_submit
xfs: remove the extra buffer reference in xfs_buf_submit
xfs: move invalidate_kernel_vmap_range to xfs_buf_ioend
xfs: simplify buffer I/O submission
xfs: move in-memory buftarg handling out of _xfs_buf_ioapply
xfs: move write verification out of _xfs_buf_ioapply
xfs: remove xfs_buf_delwri_submit_buffers
xfs: simplify xfs_buf_delwri_pushbuf
xfs: move xfs_buf_iowait out of (__)xfs_buf_submit
xfs: remove the incorrect comment about the b_pag field
xfs: remove the incorrect comment above xfs_buf_free_maps
xfs: fix a double completion for buffers on in-memory targets
xfs/libxfs: replace kmalloc() and memcpy() with kmemdup()
xfs: constify feature checks
xfs: refactor xfs_fs_statfs
...
|
|
Revert commit 41a337b40e98 ("Add EXPORT macros for exporting PM
functions") because the macros added by it are still unused almost
two years after they had been introduced.
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250116154354.149297-1-andriy.shevchenko@linux.intel.com
[ rjw: New changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In hibernation_platform_enter(), the code did not check the
return value of syscore_suspend(), potentially leading to a
situation where syscore_resume() would be called even if
syscore_suspend() failed. This could cause unpredictable
behavior or system instability.
Modify the code sequence in question to properly handle errors returned
by syscore_suspend(). If an error occurs in the suspend path, the code
now jumps to label 'Enable_irqs' skipping the syscore_resume() call and
only enabling interrupts after setting the system state to SYSTEM_RUNNING.
Fixes: 40dc166cb5dd ("PM / Core: Introduce struct syscore_ops for core subsystems PM")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250119143205.2103-1-vulab@iscas.ac.cn
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
count and offset are passed from user space and not checked, only
offset is capped to 40 bits, which can be used to read/write out of
bounds of the device.
Fixes: 6e3f26456009 (“vfio/platform: read and write support for the device fd”)
Cc: stable@vger.kernel.org
Reported-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Remove the unconditional binding of sugov kthreads to the affected CPUs
if the cpufreq driver indicates that updates can happen from any CPU.
This allows userspace to set affinities to either save power (waking up
bigger CPUs on HMP can be expensive) or increasing performance (by
letting the utilized CPUs run without preemption of the sugov kthread).
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://patch.msgid.link/5a8deed4-7764-4729-a9d4-9520c25fa7e8@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
At the end of cpufreq_online() in cpufreq.c, set_boost is executed and
the per-policy boost flag is set to mirror the cpufreq_driver boost, so
it is not necessary to run set_boost in acpi_cpufreq_cpu_init().
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20250117101457.1530653-5-zhenglifeng1@huawei.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In policy initialization, policy->max and policy->cpuinfo.max_freq are
always set to the value calculated from caps->nominal_perf.
This will cause the frequency stay on base frequency even if the policy
is already boosted when a CPU is going online.
Fix this by using policy->boost_enabled to determine which value should
be set.
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20250117101457.1530653-4-zhenglifeng1@huawei.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In cpufreq_online() of cpufreq.c, the per-policy boost flag is already
set to mirror the cpufreq_driver boost during init but using freq_table
to judge if the policy has boost frequency. There are two drawbacks to
this approach:
1. It doesn't work for the cpufreq drivers that do not use a frequency
table. For now, acpi-cpufreq and amd-pstate have to enable boost in
policy initialization. And cppc_cpufreq never set policy to boost
when going online no matter what the cpufreq_driver boost flag is.
2. If the CPU goes offline when cpufreq_driver boost is enabled and
then goes online when cpufreq_driver boost is disabled, the
per-policy boost flag will incorrectly remain true.
Running set_boost at the end of the online process is a more generic way
for all cpufreq drivers.
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20250117101457.1530653-3-zhenglifeng1@huawei.com
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It turns out that CPUX will stay on the base frequency after performing
these operations:
1. boost all CPUs: echo 1 > /sys/devices/system/cpu/cpufreq/boost
2. offline one CPU: echo 0 > /sys/devices/system/cpu/cpuX/online
3. deboost all CPUs: echo 0 > /sys/devices/system/cpu/cpufreq/boost
4. online CPUX: echo 1 > /sys/devices/system/cpu/cpuX/online
5. boost all CPUs again: echo 1 > /sys/devices/system/cpu/cpufreq/boost
This is because max_freq_req of the policy is not updated during the
online process, and the value of max_freq_req before the last offline is
retained.
When the CPU is boosted again, freq_qos_update_request() will do nothing
because the old value is the same as the new one. This causes the CPU to
stay at the base frequency. Updating max_freq_req in cpufreq_online()
will solve this problem.
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20250117101457.1530653-2-zhenglifeng1@huawei.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The driver generates following warning when regulator support isn't
enabled in the kernel. Fix it.
drivers/cpufreq/s3c64xx-cpufreq.c: In function 's3c64xx_cpufreq_set_target':
>> drivers/cpufreq/s3c64xx-cpufreq.c:55:22: warning: variable 'old_freq' set but not used [-Wunused-but-set-variable]
55 | unsigned int old_freq, new_freq;
| ^~~~~~~~
>> drivers/cpufreq/s3c64xx-cpufreq.c:54:30: warning: variable 'dvfs' set but not used [-Wunused-but-set-variable]
54 | struct s3c64xx_dvfs *dvfs;
| ^~~~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501191803.CtfT7b2o-lkp@intel.com/
Cc: 5.4+ <stable@vger.kernel.org> # v5.4+
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/236b227e929e5adc04d1e9e7af6845a46c8e9432.1737525916.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If one of the waveform functions is called for a chip that only supports
.apply(), we want that an error code is returned and not a NULL pointer
exception.
Fixes: 6c5126c6406d ("pwm: Provide new consumer API functions for waveforms")
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Trevor Gamblin <tgamblin@baylibre.com>
Link: https://lore.kernel.org/r/20250123172709.391349-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
The Vexia EDU ATLA 10 tablet comes in 2 different versions with
significantly different mainboards. The only outward difference is that
the charging barrel on one is marked 5V and the other is marked 9V.
Both ship with Android 4.4 as factory OS and have the usual broken DSDT
issues for x86 Android tablets.
Add a quirk to skip ACPI I2C client enumeration for the 5V version to
complement the existing quirk for the 9V version.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20250123132202.18209-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In commit e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL
after job completion"), we introduced a change to assign the job pointer
to NULL after completing a job, indicating job completion.
However, this approach created a race condition between the DRM
scheduler workqueue and the IRQ execution thread. As soon as the fence is
signaled in the IRQ execution thread, a new job starts to be executed.
This results in a race condition where the IRQ execution thread sets the
job pointer to NULL simultaneously as the `run_job()` function assigns
a new job to the pointer.
This race condition can lead to a NULL pointer dereference if the IRQ
execution thread sets the job pointer to NULL after `run_job()` assigns
it to the new job. When the new job completes and the GPU emits an
interrupt, `v3d_irq()` is triggered, potentially causing a crash.
[ 466.310099] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000c0
[ 466.318928] Mem abort info:
[ 466.321723] ESR = 0x0000000096000005
[ 466.325479] EC = 0x25: DABT (current EL), IL = 32 bits
[ 466.330807] SET = 0, FnV = 0
[ 466.333864] EA = 0, S1PTW = 0
[ 466.337010] FSC = 0x05: level 1 translation fault
[ 466.341900] Data abort info:
[ 466.344783] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 466.350285] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 466.355350] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 466.360677] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000089772000
[ 466.367140] [00000000000000c0] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 466.375875] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[ 466.382163] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device algif_hash algif_skcipher af_alg bnep binfmt_misc vc4 snd_soc_hdmi_codec drm_display_helper cec brcmfmac_wcc spidev rpivid_hevc(C) drm_client_lib brcmfmac hci_uart drm_dma_helper pisp_be btbcm brcmutil snd_soc_core aes_ce_blk v4l2_mem2mem bluetooth aes_ce_cipher snd_compress videobuf2_dma_contig ghash_ce cfg80211 gf128mul snd_pcm_dmaengine videobuf2_memops ecdh_generic sha2_ce ecc videobuf2_v4l2 snd_pcm v3d sha256_arm64 rfkill videodev snd_timer sha1_ce libaes gpu_sched snd videobuf2_common sha1_generic drm_shmem_helper mc rp1_pio drm_kms_helper raspberrypi_hwmon spi_bcm2835 gpio_keys i2c_brcmstb rp1 raspberrypi_gpiomem rp1_mailbox rp1_adc nvmem_rmem uio_pdrv_genirq uio i2c_dev drm ledtrig_pattern drm_panel_orientation_quirks backlight fuse dm_mod ip_tables x_tables ipv6
[ 466.458429] CPU: 0 UID: 1000 PID: 2008 Comm: chromium Tainted: G C 6.13.0-v8+ #18
[ 466.467336] Tainted: [C]=CRAP
[ 466.470306] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
[ 466.476157] pstate: 404000c9 (nZcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 466.483143] pc : v3d_irq+0x118/0x2e0 [v3d]
[ 466.487258] lr : __handle_irq_event_percpu+0x60/0x228
[ 466.492327] sp : ffffffc080003ea0
[ 466.495646] x29: ffffffc080003ea0 x28: ffffff80c0c94200 x27: 0000000000000000
[ 466.502807] x26: ffffffd08dd81d7b x25: ffffff80c0c94200 x24: ffffff8003bdc200
[ 466.509969] x23: 0000000000000001 x22: 00000000000000a7 x21: 0000000000000000
[ 466.517130] x20: ffffff8041bb0000 x19: 0000000000000001 x18: 0000000000000000
[ 466.524291] x17: ffffffafadfb0000 x16: ffffffc080000000 x15: 0000000000000000
[ 466.531452] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 466.538613] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffd08c527eb0
[ 466.545777] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
[ 466.552941] x5 : ffffffd08c4100d0 x4 : ffffffafadfb0000 x3 : ffffffc080003f70
[ 466.560102] x2 : ffffffc0829e8058 x1 : 0000000000000001 x0 : 0000000000000000
[ 466.567263] Call trace:
[ 466.569711] v3d_irq+0x118/0x2e0 [v3d] (P)
[ 466.573826] __handle_irq_event_percpu+0x60/0x228
[ 466.578546] handle_irq_event+0x54/0xb8
[ 466.582391] handle_fasteoi_irq+0xac/0x240
[ 466.586498] generic_handle_domain_irq+0x34/0x58
[ 466.591128] gic_handle_irq+0x48/0xd8
[ 466.594798] call_on_irq_stack+0x24/0x58
[ 466.598730] do_interrupt_handler+0x88/0x98
[ 466.602923] el0_interrupt+0x44/0xc0
[ 466.606508] __el0_irq_handler_common+0x18/0x28
[ 466.611050] el0t_64_irq_handler+0x10/0x20
[ 466.615156] el0t_64_irq+0x198/0x1a0
[ 466.618740] Code: 52800035 3607faf3 f9442e80 52800021 (f9406018)
[ 466.624853] ---[ end trace 0000000000000000 ]---
[ 466.629483] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[ 466.636384] SMP: stopping secondary CPUs
[ 466.640320] Kernel Offset: 0x100c400000 from 0xffffffc080000000
[ 466.646259] PHYS_OFFSET: 0x0
[ 466.649141] CPU features: 0x100,00000170,00901250,0200720b
[ 466.654644] Memory Limit: none
[ 466.657706] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
Fix the crash by assigning the job pointer to NULL before signaling the
fence. This ensures that the job pointer is cleared before any new job
starts execution, preventing the race condition and the NULL pointer
dereference crash.
Cc: stable@vger.kernel.org
Fixes: e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL after job completion")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Tested-by: Phil Elwell <phil@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250123012403.20447-1-mcanal@igalia.com
|
|
- Constify struct bin_attribute for sysfs, VPD, P2PDMA, and the IBM ACPI
hotplug driver (Thomas Weißschuh)
- Update PCI_EXP_LNKCAP_SLS comment (Lukas Wunner)
- Drop superfluous pm_wakeup.h include (Wolfram Sang)
- Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT (Dongdong Zhang)
- Correct documentation of the 'config_acs=' kernel parameter (Akihiko
Odaki)
* pci/misc:
Documentation: Fix pci=config_acs= example
PCI: Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT
PCI: Don't include 'pm_wakeup.h' directly
PCI: Update code comment on PCI_EXP_LNKCAP_SLS for PCIe r3.0
PCI/ACPI: Constify 'struct bin_attribute'
PCI/P2PDMA: Constify 'struct bin_attribute'
PCI/VPD: Constify 'struct bin_attribute'
PCI/sysfs: Constify 'struct bin_attribute'
|
|
- Add DT binding and driver support for Xilinx Versal CPM5 (Thippeswamy
Havalige)
* pci/controller/xilinx-cpm:
PCI: xilinx-cpm: Add support for Versal CPM5 Root Port Controller 1
dt-bindings: PCI: xilinx-cpm: Add compatible string for CPM5 host1
|
|
- Add struct rockchip_pcie_ep kernel-doc to fix warnings (Damien Le Moal)
- Simplify clock and reset handling by using bulk interfaces (Anand Moon)
- Pass typed rockchip_pcie (not void) pointer to
rockchip_pcie_disable_clocks() (Anand Moon)
- Return -ENOMEM, not success, when pci_epc_mem_alloc_addr() fails (Dan
Carpenter)
* pci/controller/rockchip:
PCI: rockchip-ep: Fix error code in rockchip_pcie_ep_init_ob_mem()
PCI: rockchip: Refactor rockchip_pcie_disable_clocks() signature
PCI: rockchip: Simplify reset control handling by using reset_control_bulk*() function
PCI: rockchip: Simplify clock handling by using clk_bulk*() functions
PCI: rockchip: Add missing fields descriptions for struct rockchip_pcie_ep
|
|
- Avoid passing stack buffer as resource name (King Dix)
* pci/controller/rcar-ep:
PCI: rcar-ep: Fix incorrect variable used when calling devm_request_mem_region()
|
|
- Add MODULE_DEVICE_TABLE() to enable module autoloading (Liao Chen)
* pci/controller/mvebu:
PCI: mvebu: Enable module autoloading
|
|
- Set up the inbound address translation based on whether the platform
allows coherent or non-coherent DMA (Daire McNamara)
- Update DT binding such that platforms are DMA-coherent by default and
must specify 'dma-noncoherent' if needed (Conor Dooley)
* pci/controller/microchip:
dt-bindings: PCI: microchip,pcie-host: Allow dma-noncoherent
PCI: microchip: Set inbound address translation for coherent or non-coherent mode
|
|
- Use clk_bulk_prepare_enable() instead of separate clk_bulk_prepare() and
clk_bulk_enable() (Lorenzo Bianconi)
- Rearrange reset assert/deassert so they're both done in the *_power_up()
callbacks (Lorenzo Bianconi)
- Document that Airoha EN7581 requires PHY init and power-on before PHY
reset deassert, unlike other MediaTek Gen3 controllers (Lorenzo Bianconi)
- Move Airoha EN7581 post-reset delay from the en7581 clock .enable()
method to mtk_pcie_en7581_power_up() (Lorenzo Bianconi)
- Sleep instead of delay during Airoha EN7581 power-up, since this is a
non-atomic context (Lorenzo Bianconi)
- Skip PERST# assertion on Airoha EN7581 during probe and suspend/resume to
avoid a hardware defect (Lorenzo Bianconi)
- Enable async probe to reduce system startup time (Douglas Anderson)
* pci/controller/mediatek:
PCI: mediatek-gen3: Enable async probe by default
PCI: mediatek-gen3: Avoid PCIe resetting via PERST# for Airoha EN7581 SoC
PCI: mediatek-gen3: Rely on msleep() in mtk_pcie_en7581_power_up()
PCI: mediatek-gen3: Move reset delay in mtk_pcie_en7581_power_up()
PCI: mediatek-gen3: Add comment about initialization order in mtk_pcie_en7581_power_up()
PCI: mediatek-gen3: Move reset/assert callbacks in .power_up()
PCI: mediatek-gen3: Rely on clk_bulk_prepare_enable() in mtk_pcie_en7581_power_up()
|
|
- Simplify by using syscon_regmap_lookup_by_phandle_args() instead of
syscon_regmap_lookup_by_phandle() followed by
of_property_read_u32_array() (Krzysztof Kozlowski)
* pci/controller/layerscape:
PCI: layerscape: Use syscon_regmap_lookup_by_phandle_args
|
