summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-28Merge tag 'mips_fixes_5.0_4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "A few more MIPS fixes: - Fix 16b cmpxchg() operations which could erroneously fail if bits 15:8 of the old value are non-zero. In practice I'm not aware of any actual users of 16b cmpxchg() on MIPS, but this fixes the support for it was was introduced in v4.13. - Provide a struct device to dma_alloc_coherent for Lantiq XWAY systems with a "Voice MIPS Macro Core" (VMMC) device. - Provide DMA masks for BCM63xx ethernet devices, fixing a regression introduced in v4.19. - Fix memblock reservation for the kernel when the system has a non-zero PHYS_OFFSET, correcting the memblock conversion performed in v4.20" * tag 'mips_fixes_5.0_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: fix memory setup for platforms with PHYS_OFFSET != 0 MIPS: BCM63XX: provide DMA masks for ethernet devices MIPS: lantiq: pass struct device to DMA API functions MIPS: fix truncation in __cmpxchg_small for short values
2019-02-28Merge tag 'for-linus-5.0-ofs1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux Pull orangefs fixlet from Mike Marshall: "Remove two un-needed BUG_ONs" * tag 'for-linus-5.0-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: orangefs: remove two un-needed BUG_ONs...
2019-02-28net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390XMaxime Chevallier
Upon setting the cmode on 6390 and 6390X, the associated serdes interfaces must be powered off/on. Both 6390X and 6390 share code to do so, but it currently uses the 6390 specific helper mv88e6390_serdes_power() to disable and enable the serdes interface. This call will fail silently on 6390X when trying so set a 10G interface such as XAUI or RXAUI, since mv88e6390_serdes_power() internally grabs the lane number based on modes supported by the 6390, and returns 0 when getting -ENODEV as a lane number. Using mv88e6390x_serdes_power() should be safe here, since we explicitly rule-out all ports but the 9 and 10, and because modes supported by 6390 ports 9 and 10 are a subset of those supported on 6390X. This was tested on 6390X using RXAUI mode. Fixes: 364e9d7776a3 ("net: dsa: mv88e6xxx: Power on/off SERDES on cmode change") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28ALSA: usb-audio: Add quirk for MOTU MicroBook IIManuel Reinhardt
Add an entry to the quirks-table to for usb-audio to recognize the Microbook II (although it only exposes vendor interfaces). A simple boot quirk is also implemented to set up the sample rate and make sure that no audio urbs are sent before the device is ready. This patch only provides audio playback and capture at 96kHz sample rate. Notice the following shortcomings: - The sample rate is currently hardcoded to 96k although the device also supports 48k and 44.1k. - The various mixer controls of the MicroBook are not made available. - The keep-iface control should be on by default because the device shuts down whenever the altsetting is reset which is usually unwanted. (I don't know the best way to do this) - The communication format used by the MicroBook for sample rate setting and also other setup has been reverse engineered by looking at the usbmon output while running the windows driver through virtualbox. In this patch the first byte of every message is set to \0 while in the observed communications the first byte acts as a "message-counter" increasing its value with every message sent. Leaving it at \0 does not seem to affect the device. Signed-off-by: Manuel Reinhardt <manuel.rhdt@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-28selftests: rtnetlink: use internal netns switch for ip commandsDavid Ahern
'ip' can switch network namespaces internally and then run a given command relative to that namespace without the need to fork and exec another ip instance. Update all references of the form: ip netns exec "$testns" ip ... to ip -netns "$testns" ... Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28Merge branch 's390-qeth-next'David S. Miller
Julian Wiedmann says: ==================== s390/qeth: updates 2019-02-28 please apply one more qeth patch series for net-next. This eliminates some of the quirks in our reset code, and slims down the internal state machine. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: drop redundant state checkingJulian Wiedmann
Now that qeth always uses dev_close() to shutdown the interface, we can trust the locking and remove some custom state checks. qeth_l?_stop_card() is no longer called for a card in UP state, so remove the checks there too. This basically makes the UP state obsolete, so rip out the whole thing (except for the sysfs-visible string). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: don't special-case HW trap during suspendJulian Wiedmann
It makes no difference whether we 1. manually disarm the HW trap and call the offline code with recovery_mode == 1, or 2. call the offline code with recovery_mode == 0, and let it disarm the HW trap for us. So consolidate the two code paths in the suspend callback. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: remove driver-wide workqueueJulian Wiedmann
The qeth-wide workqueue is now only used by a single caller to schedule close_dev work. Just put it on a system queue instead. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: don't defer close_dev work during recoveryJulian Wiedmann
The recovery code already runs in a kthread, we don't have to defer the offlining further. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: remove a redundant check for card->devJulian Wiedmann
smatch complains that __qeth_l3_set_offline() first accesses card->dev, and then later checks whether the pointer is valid. Since commit d3d1b205e89f ("s390/qeth: allocate netdevice early"), the pointer is _always_ valid - that patch merely missed to remove this one check. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: call dev_close() during recoveryJulian Wiedmann
When resetting an interface ("recovery"), qeth currently attempts to elide the call to dev_close(). We initially only call .ndo_close to quiesce the data path, and then offline & online the ccwgroup device. If the reset succeeded, a call to .ndo_open then resumes the data path along with some internal setup (dev_addr validation, RX modeset) that dev_open() would have usually triggered. dev_close() only gets called (via the close_dev worker) if the reset action fails. It's unclear whether this was initially done due to locking concerns, or rather to execute the reset transparently. Either way, temporarily closing the interface without dev_close() is fragile, and means we're susceptible to various races and unexpected behaviour. For instance: - Bypassing dev_deactivate_many() means that the qdiscs are not set to __QDISC_STATE_DEACTIVATED. Consequently any intermittent TX completion can wake up the txq, resulting in calls to .ndo_start_xmit while the data path is down. We have custom state checking to detect this case and drop such packets. - Because the IFF_UP flag doesn't reflect the interface's actual state during a reset, we have custom state checking in .ndo_open and .ndo_close to guard against invalid calls. - Considering that the reset might take a considerable amount of time (in particular if an IO fails and we end up waiting for its timeout), we _do_ want NETDEV_GOING_DOWN and NETDEV_DOWN events so that components like bonding, team, bridge, macvlan, vlan, ... can take appropriate action. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: unconditionally clear MAC_REGISTERED flagJulian Wiedmann
In its attempt to run only the minimal amount of tear down steps, qeth_l2_stop_card() fails to reset the "is dev_addr registered?" flag in some rare scenarios. But a future change to the tear down sequence would cause us to _always_ hit this issue, so patch it up before that code lands. Fix it by unconditionally clearing the flag bit. This also allows us to remove the additional cleanup step in qeth_dev_layer2_store(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: enable/disable the HW trap a little earlierJulian Wiedmann
When setting a L2 qeth device online, enable the HW trap as soon as the control plane is available. This allows us to catch any error that occurs during the very first commands. In the same spirit, the offline code should disable the HW trap as the very first step of its processing. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: remove RECOVER stateJulian Wiedmann
The offline code uses a specific RECOVER state to indicate that the interface should be brought up when a qeth device is set online again. Rather than having a specific card-state for this, just put it in an internal flag bit and set the state to DOWN. When working with the card's state transitions, this reduces the complexity quite a bit. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28net: dsa: mv88e6xxx: Fix u64 statisticsAndrew Lunn
The switch maintains u64 counters for the number of octets sent and received. These are kept as two u32's which need to be combined. Fix the combing, which wrongly worked on u16's. Fixes: 80c4627b2719 ("dsa: mv88x6xxx: Refactor getting a single statistic") Reported-by: Chris Healy <Chris.Healy@zii.aero> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28xen-netback: don't populate the hash cache on XenBus disconnectIgor Druzhinin
Occasionally, during the disconnection procedure on XenBus which includes hash cache deinitialization there might be some packets still in-flight on other processors. Handling of these packets includes hashing and hash cache population that finally results in hash cache data structure corruption. In order to avoid this we prevent hashing of those packets if there are no queues initialized. In that case RCU protection of queues guards the hash cache as well. Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28net/smc: allow pnetid-less configurationUrsula Braun
Without hardware pnetid support there must currently be a pnet table configured to determine the IB device port to be used for SMC RDMA traffic. This patch enables a setup without pnet table, if the used handshake interface belongs already to a RoCE port. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28xen-netback: fix occasional leak of grant ref mappings under memory pressureIgor Druzhinin
Zero-copy callback flag is not yet set on frag list skb at the moment xenvif_handle_frag_list() returns -ENOMEM. This eventually results in leaking grant ref mappings since xenvif_zerocopy_callback() is never called for these fragments. Those eventually build up and cause Xen to kill Dom0 as the slots get reused for new mappings: "d0v0 Attempt to implicitly unmap a granted PTE c010000329fce005" That behavior is observed under certain workloads where sudden spikes of page cache writes coexist with active atomic skb allocations from network traffic. Additionally, rework the logic to deal with frag_list deallocation in a single place. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28net: sched: pie: avoid slow division in drop probability decayLeslie Monis
As per RFC 8033, it is sufficient for the drop probability decay factor to have a value of (1 - 1/64) instead of 98%. This avoids the need to do slow division. Suggested-by: David Laight <David.Laight@aculab.com> Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28sctp: chunk.c: correct format string for size_t in printkMatthias Maennich
According to Documentation/core-api/printk-formats.rst, size_t should be printed with %zu, rather than %Zu. In addition, using %Zu triggers a warning on clang (-Wformat-extra-args): net/sctp/chunk.c:196:25: warning: data argument not used by format string [-Wformat-extra-args] __func__, asoc, max_data); ~~~~~~~~~~~~~~~~^~~~~~~~~ ./include/linux/printk.h:440:49: note: expanded from macro 'pr_warn_ratelimited' printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ ./include/linux/printk.h:424:17: note: expanded from macro 'printk_ratelimited' printk(fmt, ##__VA_ARGS__); \ ~~~ ^ Fixes: 5b5e0928f742 ("lib/vsprintf.c: remove %Z support") Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Matthias Maennich <maennich@google.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28net: netem: fix skb length BUG_ON in __skb_to_sgvecSheng Lan
It can be reproduced by following steps: 1. virtio_net NIC is configured with gso/tso on 2. configure nginx as http server with an index file bigger than 1M bytes 3. use tc netem to produce duplicate packets and delay: tc qdisc add dev eth0 root netem delay 100ms 10ms 30% duplicate 90% 4. continually curl the nginx http server to get index file on client 5. BUG_ON is seen quickly [10258690.371129] kernel BUG at net/core/skbuff.c:4028! [10258690.371748] invalid opcode: 0000 [#1] SMP PTI [10258690.372094] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G W 5.0.0-rc6 #2 [10258690.372094] RSP: 0018:ffffa05797b43da0 EFLAGS: 00010202 [10258690.372094] RBP: 00000000000005ea R08: 0000000000000000 R09: 00000000000005ea [10258690.372094] R10: ffffa0579334d800 R11: 00000000000002c0 R12: 0000000000000002 [10258690.372094] R13: 0000000000000000 R14: ffffa05793122900 R15: ffffa0578f7cb028 [10258690.372094] FS: 0000000000000000(0000) GS:ffffa05797b40000(0000) knlGS:0000000000000000 [10258690.372094] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [10258690.372094] CR2: 00007f1a6dc00868 CR3: 000000001000e000 CR4: 00000000000006e0 [10258690.372094] Call Trace: [10258690.372094] <IRQ> [10258690.372094] skb_to_sgvec+0x11/0x40 [10258690.372094] start_xmit+0x38c/0x520 [virtio_net] [10258690.372094] dev_hard_start_xmit+0x9b/0x200 [10258690.372094] sch_direct_xmit+0xff/0x260 [10258690.372094] __qdisc_run+0x15e/0x4e0 [10258690.372094] net_tx_action+0x137/0x210 [10258690.372094] __do_softirq+0xd6/0x2a9 [10258690.372094] irq_exit+0xde/0xf0 [10258690.372094] smp_apic_timer_interrupt+0x74/0x140 [10258690.372094] apic_timer_interrupt+0xf/0x20 [10258690.372094] </IRQ> In __skb_to_sgvec(), the skb->len is not equal to the sum of the skb's linear data size and nonlinear data size, thus BUG_ON triggered. Because the skb is cloned and a part of nonlinear data is split off. Duplicate packet is cloned in netem_enqueue() and may be delayed some time in qdisc. When qdisc len reached the limit and returns NET_XMIT_DROP, the skb will be retransmit later in write queue. the skb will be fragmented by tso_fragment(), the limit size that depends on cwnd and mss decrease, the skb's nonlinear data will be split off. The length of the skb cloned by netem will not be updated. When we use virtio_net NIC and invoke skb_to_sgvec(), the BUG_ON trigger. To fix it, netem returns NET_XMIT_SUCCESS to upper stack when it clones a duplicate packet. Fixes: 35d889d1 ("sch_netem: fix skb leak in netem_enqueue()") Signed-off-by: Sheng Lan <lansheng@huawei.com> Reported-by: Qin Ji <jiqin.ji@huawei.com> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28cxgb4vf: Enter debugging mode if FW is inaccessibleArjun Vynipadath
If we are not able to reach firmware, enter debugging mode that will help us to get adapter logs. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28cxgb4: Enable outer UDP checksum offload for T6Arjun Vynipadath
T6 adapters support outer UDP checksum offload for encapsulated packets, hence enabling netdev feature flag NETIF_F_GSO_UDP_TUNNEL_CSUM. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28cxgb4/cxgb4vf: Fix up netdev->hw_featuresArjun Vynipadath
GRO is done by cxgb4/cxgb4vf. Hence set NETIF_F_GRO flag for both cxgb4/cxgb4vf. Cleaned up VLAN netdev features in cxgb4vf. Also fixed NETIF_F_HIGHDMA being set unconditionally for vlan netdev features. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28staging: ks7010: removed custom Michael MIC implementation.Jeremy Sowden
Changed the driver to use the kernel's own implementation. Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28staging: rtl8192e: Fix space and suspect issueOscar Gomez Fuente
These changes fixed a checkpatch error for space required before the open brace '{' as well as a warning for suspect code indent for conditional statements. Signed-off-by: Oscar Gomez Fuente <oscargomezf@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28dt-bindings: hwmon: Add missing documentation for lm75Jagan Teki
Add missing dt-binding documentation for lm75 hwmon sensor. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-02-28Merge tag 'mmc-v5.0-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fix NULL ptr crash for a special test case - Align max segment size with logical block size to prevent bugs in v5.1-rc1. MMC host: - cqhci: Minor fixes - tmio: Prevent interrupt storm - tmio: Fixup SD/MMC card initialization - spi: Allow card to be detected during probe - sdhci-esdhc-imx: Fixup fix for ERR004536" * tag 'mmc-v5.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-esdhc-imx: correct the fix of ERR004536 mmc: core: align max segment size with logical block size mmc: cqhci: Fix a tiny potential memory leak on error condition mmc: cqhci: fix space allocated for transfer descriptor mmc: core: Fix NULL ptr crash from mmc_should_fail_request mmc: tmio: fix access width of Block Count Register mmc: tmio_mmc_core: don't claim spurious interrupts mmc: spi: Fix card detection during probe
2019-02-28Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a compiler warning introduced by a previous fix, as well as two crash bugs on ARM" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: sha512/arm - fix crash bug in Thumb2 build crypto: sha256/arm - fix crash bug in Thumb2 build crypto: ccree - add missing inline qualifier
2019-02-28kvm: properly check debugfs dentry before using itGreg Kroah-Hartman
debugfs can now report an error code if something went wrong instead of just NULL. So if the return value is to be used as a "real" dentry, it needs to be checked if it is an error before dereferencing it. This is now happening because of ff9fb72bc077 ("debugfs: return error values, not NULL"). syzbot has found a way to trigger multiple debugfs files attempting to be created, which fails, and then the error code gets passed to dentry_path_raw() which obviously does not like it. Reported-by: Eric Biggers <ebiggers@kernel.org> Reported-and-tested-by: syzbot+7857962b4d45e602b8ad@syzkaller.appspotmail.com Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-28regulator: stm32-vrefbuf: add power management supportFabrice Gasnier
Add support for suspend/resume and runtime PM to stm32-vrefbuf driver. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-28tee: optee: update optee_msg.h and optee_smc.h to dual licenseJerome Forissier
The files optee_msg.h and optee_smc.h (under drivers/tee/optee) contain information originating from the OP-TEE OS project [1] [2], where the licensing terms are BSD 2-Clause. Therefore, apply a dual license to those files. Link: [1] https://github.com/OP-TEE/optee_os/blob/master/core/include/optee_msg.h Link: [2] https://github.com/OP-TEE/optee_os/blob/master/core/arch/arm/include/sm/optee_smc.h Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-02-28tee: add cancellation support to client interfaceIgor Opaniuk
Add support of cancellation request to the TEE kernel internal client interface. Can be used by software TPM drivers, that leverage TEE under the hood (for instance TPM2.0 mobile profile), for requesting cancellation of time-consuming operations (RSA key-pair generation etc.). Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-02-28Merge tag 'asoc-v5.1-2' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: More changes for v5.1 Another batch of changes for ASoC, no big core changes - it's mainly small fixes and improvements for individual drivers. - A big refresh and cleanup of the Samsung drivers, fixing a number of issues which allow the driver to be used with a wider range of userspaces. - Fixes for the Intel drivers to make them more standard so less likely to get bitten by core issues. - New driver for Cirrus Logic CS35L26.
2019-02-28habanalabs: fix little-endian<->cpu conversion warningsOded Gabbay
Add __cpu_to_le16/32/64 and __le16/32/64_to_cpu where needed according to sparse. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: use NULL to initialize array of pointersOded Gabbay
This patch fixes the following sparse warnings: drivers/misc/habanalabs/hwmon.c:20:56: warning: Using plain integer as NULL pointer Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: fix little-endian<->cpu conversion warningsTomer Tayar
Add __cpu_to_le16/32/64 and __le16/32/64_to_cpu where needed according to sparse. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: soft-reset device if context-switch failsOded Gabbay
This patch fix a bug in the driver, where if the TPC or MME remains in non-IDLE even after all the command submissions are done (due to user bug or malicious user), then future command submissions will fail in the context-switch stage and the driver will remain in "stuck" mode. The fix is to do a soft-reset of the device in case the context-switch fails, because the device should be IDLE during context-switch. If it is not IDLE, then something is wrong and we should reset the compute engines. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: print pointer using %pOded Gabbay
Don't cast pointer to u64 to print it. Instead, print the pointer using %p. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: fix memory leak with CBs with unaligned sizeOded Gabbay
This patch fix a bug when a command buffer with unaligned size (with regard to PAGE_SIZE) was used. The accounting for the unmap operation wasn't done correctly and could result in a memory leak. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: return correct error code on MMU mapping failureOmer Shpigelman
This patch fix a bug where EINVAL was returned instead of -EINVAL. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: add comments in uapi/misc/habanalabs.hOded Gabbay
Add comment about minimum and maximum size of command buffer. Add some text about the expected input of CS IOCTL. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: extend QMAN0 job timeoutOmer Shpigelman
This patch fix a bug where the timeout for sending a job on QMAN0 by KMD wasn't enough in palladium environment. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: set DMA0 completion to SOB 1007Oded Gabbay
This patch fix a bug where DMA channel 0 completion address wasn't initialized by the driver. The patch sets the address to Sync Object no. 1007 Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: fix validation of WREG32 to DMA completionOded Gabbay
This patch fix a bug in the validation of WREG32 in DMA queues. The validation was too strict. It allowed the user to set the completion address only for DMA channel 1. The fix allows the user to set the completion address for all 5 DMA channels. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: fix mmu cache registers initOded Gabbay
This patch fix an incorrect initialization of the MMU cache registers. The shift operation was done in the wrong direction. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: disable CPU access on timeoutsOded Gabbay
This patch provides a workaround for a bug in the F/W where the response time for a request from KMD may take more then 100ms. This could cause the queue between KMD and the F/W to get out of sync. The WA is to: 1. Increase the timeout of ALL requests to 1s. 2. In case a request isn't answered in time, mark the state as "cpu_disabled" and prevent sending further requests from KMD to the F/W. This will eventually lead to a heartbeat failure and hard reset of the device. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: add MMU DRAM default page mappingOmer Shpigelman
This patch provides a workaround for a H/W bug in Goya, where access to RAZWI from TPC can cause PCI completion timeout. The WA is to use the device MMU to map any unmapped DRAM memory to a default page in the DRAM. That way, the TPC will never reach RAZWI upon accessing a bad address in the DRAM. When a DRAM page is mapped by the user, its default mapping is overwritten. Once that page is unmapped, the MMU driver will map that page to the default page. To help debugging, the driver will set the default page area to 0x99 on device initialization. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28habanalabs: Dissociate RAZWI info from event typesTomer Tayar
This patch provides a workaround for a H/W bug in the RAZWI logger in Goya. The logger doesn't recognize the initiator correctly and as a result, accesses from one initiator are reported that were coming from a different initiator. The WA is to print the error information from the event entries we receive without looking at the RAZWI logger at all. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-14 13:49:56 +0000