summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-28Merge tag 'topic/mei-hdcp-2019-02-26' of ↵Greg Kroah-Hartman
git://anongit.freedesktop.org/drm/drm-intel into char-misc-next Daniel writes: mei-hdcp driver mei driver for the me hdcp client, for use by drm/i915. Including the following prep work: - whitelist hdcp client in mei bus - merge to include char-misc-next - drm/i915 side of the mei_hdcp/i915 component interface - component prep work (including one patch touching i915&snd-hda) * tag 'topic/mei-hdcp-2019-02-26' of git://anongit.freedesktop.org/drm/drm-intel: (23 commits) misc/mei/hdcp: Component framework for I915 Interface misc/mei/hdcp: Closing wired HDCP2.2 Tx Session misc/mei/hdcp: Enabling the HDCP authentication misc/mei/hdcp: Verify M_prime misc/mei/hdcp: Repeater topology verification and ack misc/mei/hdcp: Prepare Session Key misc/mei/hdcp: Verify L_prime misc/mei/hdcp: Initiate Locality check misc/mei/hdcp: Store the HDCP Pairing info misc/mei/hdcp: Verify H_prime misc/mei/hdcp: Verify Receiver Cert and prepare km misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session misc/mei/hdcp: Define ME FW interface for HDCP2.2 misc/mei/hdcp: Client driver for HDCP application mei: bus: whitelist hdcp client drm/audio: declaration of struct device drm: helper functions for hdcp2 seq_num to from u32 drm/i915: MEI interface definition drm/i915: header for i915 - MEI_HDCP interface drm/i915: enum port definition is moved into i915_drm.h ...
2019-02-28x86/boot/compressed/64: Do not read legacy ROM on EFI systemKirill A. Shutemov
EFI systems do not necessarily provide a legacy ROM. If the ROM is missing the memory is not mapped at all. Trying to dereference values in the legacy ROM area leads to a crash on Macbook Pro. Only look for values in the legacy ROM area for non-EFI system. Fixes: 3548e131ec6a ("x86/boot/compressed/64: Find a place for 32-bit trampoline") Reported-by: Pitam Mitra <pitamm@gmail.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Bockjoo Kim <bockjoo@phys.ufl.edu> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190219075224.35058-1-kirill.shutemov@linux.intel.com Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202351
2019-02-28Merge branch 'fixes' into nextUlf Hansson
2019-02-28mmc: sdhci-esdhc-imx: correct the fix of ERR004536BOUGH CHEN
Commit 18094430d6b5 ("mmc: sdhci-esdhc-imx: add ADMA Length Mismatch errata fix") involve the fix of ERR004536, but the fix is incorrect. Double confirm with IC, need to clear the bit 7 of register 0x6c rather than set this bit 7. Here is the definition of bit 7 of 0x6c: 0: enable the new IC fix for ERR004536 1: do not use the IC fix, keep the same as before Find this issue on i.MX845s-evk board when enable CMDQ, and let system in heavy loading. root@imx8mmevk:~# dd if=/dev/mmcblk2 of=/dev/null bs=1M & root@imx8mmevk:~# memtester 1000M > /dev/zero & root@imx8mmevk:~# [ 139.897220] mmc2: cqhci: timeout for tag 16 [ 139.901417] mmc2: cqhci: ============ CQHCI REGISTER DUMP =========== [ 139.907862] mmc2: cqhci: Caps: 0x0000310a | Version: 0x00000510 [ 139.914311] mmc2: cqhci: Config: 0x00001001 | Control: 0x00000000 [ 139.920753] mmc2: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006 [ 139.927193] mmc2: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000 [ 139.933634] mmc2: cqhci: TDL base: 0x7809c000 | TDL up32: 0x00000000 [ 139.940073] mmc2: cqhci: Doorbell: 0x00030000 | TCN: 0x00000000 [ 139.946518] mmc2: cqhci: Dev queue: 0x00010000 | Dev Pend: 0x00010000 [ 139.952967] mmc2: cqhci: Task clr: 0x00000000 | SSC1: 0x00011000 [ 139.959411] mmc2: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000000 [ 139.965857] mmc2: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000 [ 139.972308] mmc2: cqhci: Resp idx: 0x0000002e | Resp arg: 0x00000900 [ 139.978761] mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== [ 139.985214] mmc2: sdhci: Sys addr: 0xb2c19000 | Version: 0x00000002 [ 139.991669] mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000400 [ 139.998127] mmc2: sdhci: Argument: 0x40110400 | Trn mode: 0x00000033 [ 140.004618] mmc2: sdhci: Present: 0x01088a8f | Host ctl: 0x00000030 [ 140.011113] mmc2: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 [ 140.017583] mmc2: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f [ 140.024039] mmc2: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 [ 140.030497] mmc2: sdhci: Int enab: 0x107f4000 | Sig enab: 0x107f4000 [ 140.036972] mmc2: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000502 [ 140.043426] mmc2: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407 [ 140.049867] mmc2: sdhci: Cmd: 0x00002c1a | Max curr: 0x00ffffff [ 140.056314] mmc2: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0xffffffff [ 140.062755] mmc2: sdhci: Resp[2]: 0x328f5903 | Resp[3]: 0x00d00f00 [ 140.069195] mmc2: sdhci: Host ctl2: 0x00000008 [ 140.073640] mmc2: sdhci: ADMA Err: 0x00000007 | ADMA Ptr: 0x7809c108 [ 140.080079] mmc2: sdhci: ============================================ [ 140.086662] mmc2: running CQE recovery Fixes: 18094430d6b5 ("mmc: sdhci-esdhc-imx: add ADMA Length Mismatch errata fix") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-28x86, retpolines: Raise limit for generating indirect calls from switch-caseDaniel Borkmann
From networking side, there are numerous attempts to get rid of indirect calls in fast-path wherever feasible in order to avoid the cost of retpolines, for example, just to name a few: * 283c16a2dfd3 ("indirect call wrappers: helpers to speed-up indirect calls of builtin") * aaa5d90b395a ("net: use indirect call wrappers at GRO network layer") * 028e0a476684 ("net: use indirect call wrappers at GRO transport layer") * 356da6d0cde3 ("dma-mapping: bypass indirect calls for dma-direct") * 09772d92cd5a ("bpf: avoid retpoline for lookup/update/delete calls on maps") * 10870dd89e95 ("netfilter: nf_tables: add direct calls for all builtin expressions") [...] Recent work on XDP from Björn and Magnus additionally found that manually transforming the XDP return code switch statement with more than 5 cases into if-else combination would result in a considerable speedup in XDP layer due to avoidance of indirect calls in CONFIG_RETPOLINE enabled builds. On i40e driver with XDP prog attached, a 20-26% speedup has been observed [0]. Aside from XDP, there are many other places later in the networking stack's critical path with similar switch-case processing. Rather than fixing every XDP-enabled driver and locations in stack by hand, it would be good to instead raise the limit where gcc would emit expensive indirect calls from the switch under retpolines and stick with the default as-is in case of !retpoline configured kernels. This would also have the advantage that for archs where this is not necessary, we let compiler select the underlying target optimization for these constructs and avoid potential slow-downs by if-else hand-rewrite. In case of gcc, this setting is controlled by case-values-threshold which has an architecture global default that selects 4 or 5 (latter if target does not have a case insn that compares the bounds) where some arch back ends like arm64 or s390 override it with their own target hooks, for example, in gcc commit db7a90aa0de5 ("S/390: Disable prediction of indirect branches") the threshold pretty much disables jump tables by limit of 20 under retpoline builds. Comparing gcc's and clang's default code generation on x86-64 under O2 level with retpoline build results in the following outcome for 5 switch cases: * gcc with -mindirect-branch=thunk-inline -mindirect-branch-register: # gdb -batch -ex 'disassemble dispatch' ./c-switch Dump of assembler code for function dispatch: 0x0000000000400be0 <+0>: cmp $0x4,%edi 0x0000000000400be3 <+3>: ja 0x400c35 <dispatch+85> 0x0000000000400be5 <+5>: lea 0x915f8(%rip),%rdx # 0x4921e4 0x0000000000400bec <+12>: mov %edi,%edi 0x0000000000400bee <+14>: movslq (%rdx,%rdi,4),%rax 0x0000000000400bf2 <+18>: add %rdx,%rax 0x0000000000400bf5 <+21>: callq 0x400c01 <dispatch+33> 0x0000000000400bfa <+26>: pause 0x0000000000400bfc <+28>: lfence 0x0000000000400bff <+31>: jmp 0x400bfa <dispatch+26> 0x0000000000400c01 <+33>: mov %rax,(%rsp) 0x0000000000400c05 <+37>: retq 0x0000000000400c06 <+38>: nopw %cs:0x0(%rax,%rax,1) 0x0000000000400c10 <+48>: jmpq 0x400c90 <fn_3> 0x0000000000400c15 <+53>: nopl (%rax) 0x0000000000400c18 <+56>: jmpq 0x400c70 <fn_2> 0x0000000000400c1d <+61>: nopl (%rax) 0x0000000000400c20 <+64>: jmpq 0x400c50 <fn_1> 0x0000000000400c25 <+69>: nopl (%rax) 0x0000000000400c28 <+72>: jmpq 0x400c40 <fn_0> 0x0000000000400c2d <+77>: nopl (%rax) 0x0000000000400c30 <+80>: jmpq 0x400cb0 <fn_4> 0x0000000000400c35 <+85>: push %rax 0x0000000000400c36 <+86>: callq 0x40dd80 <abort> End of assembler dump. * clang with -mretpoline emitting search tree: # gdb -batch -ex 'disassemble dispatch' ./c-switch Dump of assembler code for function dispatch: 0x0000000000400b30 <+0>: cmp $0x1,%edi 0x0000000000400b33 <+3>: jle 0x400b44 <dispatch+20> 0x0000000000400b35 <+5>: cmp $0x2,%edi 0x0000000000400b38 <+8>: je 0x400b4d <dispatch+29> 0x0000000000400b3a <+10>: cmp $0x3,%edi 0x0000000000400b3d <+13>: jne 0x400b52 <dispatch+34> 0x0000000000400b3f <+15>: jmpq 0x400c50 <fn_3> 0x0000000000400b44 <+20>: test %edi,%edi 0x0000000000400b46 <+22>: jne 0x400b5c <dispatch+44> 0x0000000000400b48 <+24>: jmpq 0x400c20 <fn_0> 0x0000000000400b4d <+29>: jmpq 0x400c40 <fn_2> 0x0000000000400b52 <+34>: cmp $0x4,%edi 0x0000000000400b55 <+37>: jne 0x400b66 <dispatch+54> 0x0000000000400b57 <+39>: jmpq 0x400c60 <fn_4> 0x0000000000400b5c <+44>: cmp $0x1,%edi 0x0000000000400b5f <+47>: jne 0x400b66 <dispatch+54> 0x0000000000400b61 <+49>: jmpq 0x400c30 <fn_1> 0x0000000000400b66 <+54>: push %rax 0x0000000000400b67 <+55>: callq 0x40dd20 <abort> End of assembler dump. For sake of comparison, clang without -mretpoline: # gdb -batch -ex 'disassemble dispatch' ./c-switch Dump of assembler code for function dispatch: 0x0000000000400b30 <+0>: cmp $0x4,%edi 0x0000000000400b33 <+3>: ja 0x400b57 <dispatch+39> 0x0000000000400b35 <+5>: mov %edi,%eax 0x0000000000400b37 <+7>: jmpq *0x492148(,%rax,8) 0x0000000000400b3e <+14>: jmpq 0x400bf0 <fn_0> 0x0000000000400b43 <+19>: jmpq 0x400c30 <fn_4> 0x0000000000400b48 <+24>: jmpq 0x400c10 <fn_2> 0x0000000000400b4d <+29>: jmpq 0x400c20 <fn_3> 0x0000000000400b52 <+34>: jmpq 0x400c00 <fn_1> 0x0000000000400b57 <+39>: push %rax 0x0000000000400b58 <+40>: callq 0x40dcf0 <abort> End of assembler dump. Raising the cases to a high number (e.g. 100) will still result in similar code generation pattern with clang and gcc as above, in other words clang generally turns off jump table emission by having an extra expansion pass under retpoline build to turn indirectbr instructions from their IR into switch instructions as a built-in -mno-jump-table lowering of a switch (in this case, even if IR input already contained an indirect branch). For gcc, adding --param=case-values-threshold=20 as in similar fashion as s390 in order to raise the limit for x86 retpoline enabled builds results in a small vmlinux size increase of only 0.13% (before=18,027,528 after=18,051,192). For clang this option is ignored due to i) not being needed as mentioned and ii) not having above cmdline parameter. Non-retpoline-enabled builds with gcc continue to use the default case-values-threshold setting, so nothing changes here. [0] https://lore.kernel.org/netdev/20190129095754.9390-1-bjorn.topel@gmail.com/ and "The Path to DPDK Speeds for AF_XDP", LPC 2018, networking track: - http://vger.kernel.org/lpc_net2018_talks/lpc18_pres_af_xdp_perf-v3.pdf - http://vger.kernel.org/lpc_net2018_talks/lpc18_paper_af_xdp_perf-v2.pdf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: netdev@vger.kernel.org Cc: David S. Miller <davem@davemloft.net> Cc: Magnus Karlsson <magnus.karlsson@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/20190221221941.29358-1-daniel@iogearbox.net
2019-02-28x86/hyper-v: Fix definition of HV_MAX_FLUSH_REP_COUNTLan Tianyu
The max flush rep count of HvFlushGuestPhysicalAddressList hypercall is equal with how many entries of union hv_gpa_page_range can be populated into the input parameter page. The code lacks parenthesis around PAGE_SIZE - 2 * sizeof(u64) which results in bogus computations. Add them. Fixes: cc4edae4b924 ("x86/hyper-v: Add HvFlushGuestAddressList hypercall support") Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: kys@microsoft.com Cc: haiyangz@microsoft.com Cc: sthemmin@microsoft.com Cc: sashal@kernel.org Cc: bp@alien8.de Cc: hpa@zytor.com Cc: gregkh@linuxfoundation.org Cc: devel@linuxdriverproject.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190225143114.5149-1-Tianyu.Lan@microsoft.com
2019-02-28kthread: Do not use TIMER_IRQSAFESebastian Andrzej Siewior
The TIMER_IRQSAFE usage was introduced in commit 22597dc3d97b1 ("kthread: initial support for delayed kthread work") which modelled the delayed kthread code after workqueue's code. The workqueue code requires the flag TIMER_IRQSAFE for synchronisation purpose. This is not true for kthread's delay timer since all operations occur under a lock. Remove TIMER_IRQSAFE from the timer initialisation and use timer_setup() for initialisation purpose which is the official function. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Link: https://lkml.kernel.org/r/20190212162554.19779-2-bigeasy@linutronix.de
2019-02-28kthread: Convert worker lock to raw spinlockJulia Cartwright
In order to enable the queuing of kthread work items from hardirq context even when PREEMPT_RT_FULL is enabled, convert the worker spin_lock to a raw_spin_lock. This is only acceptable to do because the work performed under the lock is well-bounded and minimal. Reported-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reported-by: Tim Sander <tim@krieglstein.org> Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Link: https://lkml.kernel.org/r/20190212162554.19779-1-bigeasy@linutronix.de
2019-02-28Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 5.1. Major changes: ath10k * more preparation for SDIO support wil6210 * support up to 20 stations in AP mode
2019-02-28wil6210: check null pointer in _wil_cfg80211_merge_extra_iesAlexei Avshalom Lazar
ies1 or ies2 might be null when code inside _wil_cfg80211_merge_extra_ies access them. Add explicit check for null and make sure ies1/ies2 are not accessed in such a case. spos might be null and be accessed inside _wil_cfg80211_merge_extra_ies. Add explicit check for null in the while condition statement and make sure spos is not accessed in such a case. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28wil6210: ignore HALP ICR if already handledMaya Erez
HALP ICR is set as long as the FW should stay awake. To prevent its multiple handling the driver masks this IRQ bit. However, if there is a different MISC ICR before the driver clears this bit, there is a risk of race condition between HALP mask and unmask. This race leads to HALP timeout, in case it is mistakenly masked. Add an atomic flag to indicate if HALP ICR should be handled. Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28wil6210: fix invalid sta statistics updateDedy Lansky
Upon status ring handling, in case there are both unicast and multicast (cid == max) status messages to handle, wrong sta statistics might get updated. Fix this by setting stats to NULL upon invalid cid (e.g. == max_assoc_sta). Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28wil6210: accessing 802.3 addresses via utility functionsAhmad Masri
Rearrange the code by having functions to access 802.3 header members, source and destination addresses. Signed-off-by: Ahmad Masri <amasri@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28wil6210: support up to 20 stations in AP modeAhmad Masri
New FW added support for upto 20 clients in AP mode. Change the driver to support this as well. FW reports it's max supported associations in WMI_READY_EVENT. Some WMI commands/events use cidxtid field which is limited to 16 cids. Use new cid/tid fields instead. For Rx packets cid from rx descriptor is limited to 3 bits (0..7), to find the real cid, compare transmitter address with the stored stations mac address in the driver sta array. EDMA FW still supports 8 stations. Extending the support to 20 stations will come later. Signed-off-by: Ahmad Masri <amasri@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28wil6210: add option to drop Tx packets when Tx ring is fullDedy Lansky
In AP mode with multiple clients, driver stops net queue (netif_tx_stop_queue) upon first ring (serving specific client) becoming full. This can have negative effect on transmission to other clients which may still have room in their corresponding rings. Implement new policy in which stop/wake net queue are not used. In case there is no room in the ring for a transmitted packet, drop the packet. New policy can be helpful to debug performance issues, to guarantee maximum utilization of net queues. New policy is disabled by default and can be enabled by debugfs: echo 1 > drop_if_ring_full Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28wil6210: remove rtap_include_phy_info module paramMaya Erez
Due to a HW issue in PHY info collection rtap_include_phy_info is not in use, hence can be removed. Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28tee: optee: add missing of_node_put after of_device_is_availableJulia Lawall
Add an of_node_put when a tested device node is not available. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ identifier f; local idexpression e; expression x; @@ e = f(...); ... when != of_node_put(e) when != x = e when != e = x when any if (<+...of_device_is_available(e)...+>) { ... when != of_node_put(e) ( return e; | + of_node_put(e); return ...; ) } // </smpl> Fixes: db878f76b9ff ("tee: optee: take DT status property into account") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-02-28ath10k: Fill rx duration for each peer in fw_stats for WCN3990Surabhi Vishnoi
Currently, rx_duration for each peer is not getting populated in fw_stats debugfs entry for WCN3990. WCN3990 firmware sends rx duration for each peer as part of peer_extd_stats in WMI_UPDATE_STATS_EVENT. To enable peer_extd_stats, firmware expects host to send fw_stats_req_mask with flag WMI_TLV_PEER_STATS_EXTD set in WMI_REQUEST_STATS_CMD. Send fw_stats_req_mask with flag WMI_TLV_PEER_STATS_EXTD set in WMI_REQUEST_STATS_CMD and parse the peer_extd_stats in WMI_UPDATE_STATS_EVENT to populate the rx_duration of each peer in fw_stats debugfs entry. Currently the driver handles 32-bit rx_duration, but the rx_duration for WCN3990 can be upto 63 bit. The firmware sends rx_duration split into two 32-bit fields, with the upper 32-bits being valid only if its MSB is set. This change handles the 63-bit rx_duration obtained from WCN3990 and maintain the backward compatibility. To get the rx_duration of each connected peer : cat /sys/kernel/debug/ieee80211/phyX/ath10k/fw_stats Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28i3c: master: dw-i3c-master: mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/i3c/master/dw-i3c-master.c: In function ‘dw_i3c_master_bus_init’: drivers/i3c/master/dw-i3c-master.c:603:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (ret) ^ drivers/i3c/master/dw-i3c-master.c:605:2: note: here case I3C_BUS_MODE_PURE: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Vitor Soares <vitor.soares@synopsys.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-02-28MAINTAINERS: Add an IRC channel for the I3C subsystemBoris Brezillon
The #linux-i3c chan has been created on freenode to discuss I3C related topics. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
2019-02-28ath10k: Fix the wrong calculation ht_idx and idx of rate table for tx_statsSurabhi Vishnoi
ht_idx (ht rate index) and idx (rate table index) are calculated based on mcs index. This mcs index used in the above calculation should be 0-9 for getting the correct ht_idx and idx. Currently the mcs index used for the above calculations is mcs index which can be 0-31 (in case of HT), leading to incorrect rate index and ht index values. Fix the issue by obtaining mcs value from the ratecode reported by firmware and use it for calculating ht_idx and idx (rate-table index). Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: e88975ca37d1 ("ath10k: dump tx stats in rate table format") Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28ath10k: Fix the wrong updation of SGI in tx_stats debugfsSurabhi Vishnoi
The SGI is updated wrongly in tx stats table in debugfs per sta entry. To know whether the packets/bytes are sent with SHORT GI, test whether the SGI bit(ATH10K_RATE_INFO_FLAGS_SGI_BIT) is set or not in the txrate flags. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: a904417fc876 ("ath10k: add extended per sta tx statistics support") Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28ath10k: Fix the wrong updation of BW in tx_stats debugfs entrySurabhi Vishnoi
Currently, the bandwidth is updated wrongly in BW table in tx_stats debugfs per sta as there is difference in number of bandwidth type in mac80211 and driver stats table. This leads to bandwidth getting updated at wrong index in bandwidth table in tx_stats. Fix this index mismatch between mac80211 and driver stats table (BW table) by making the number of bandwidth type in driver compatible with mac80211. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: a904417fc876 ("ath10k: add extended per sta tx statistics support") Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28ath10k: Fix the incorrect updation of NSS data in tx statsSurabhi Vishnoi
The NSS data is updated incorrectly in the tx stats as the array indexing starts from zero. Fix the incorrect updation of NSS data in tx_stats by taking into consideration the array index starting from zero. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: a904417fc876 ("ath10k: add extended per sta tx statistics support") Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rtlwifi: rtl8192se: Remove set but not used variable 'seg_ptr'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c: In function '_rtl92s_firmware_downloadcode': drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c:139:17: warning: variable 'seg_ptr' set but not used [-Wunused-but-set-variable] It's not used after commit 59ae1d127ac0 ("networking: introduce and use skb_put_data()") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rtlwifi: rtl8723ae: Remove set but not used variable 'bt_retry_cnt'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hal_btc.c: In function '_rtl8723e_dm_bt_coexist_2_ant': drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hal_btc.c:1408:5: warning: variable 'bt_retry_cnt' set but not used [-Wunused-but-set-variable] It's never used and can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rtlwifi: rtl8723be: Remove set but not used variable 'b_last_is_cur_rdlstate'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/rtl8723be/dm.c: In function 'rtl8723be_dm_check_edca_turbo': drivers/net/wireless/realtek/rtlwifi/rtl8723be/dm.c:998:7: warning: variable 'b_last_is_cur_rdlstate' set but not used [-Wunused-but-set-variable] It's never used and can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28mt76: fix a leaked reference by adding a missing of_node_putWen Yang
The call to of_find_node_by_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/wireless/mediatek/mt76/eeprom.c:58:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. ./drivers/net/wireless/mediatek/mt76/eeprom.c:61:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. ./drivers/net/wireless/mediatek/mt76/eeprom.c:67:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. ./drivers/net/wireless/mediatek/mt76/eeprom.c:70:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. ./drivers/net/wireless/mediatek/mt76/eeprom.c:72:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Felix Fietkau <nbd@nbd.name> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rtlwifi: rtl8192com: Fix blank line problemsLarry Finger
The following types of blank line problems are reported: WARNING: Missing a blank line after declarations CHECK: Please don't use multiple blank lines There are no code changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rtlwifi: rtl8192cu: Fix problems with blank linesLarry Finger
The following problems were found: WARNING: Missing a blank line after declarations CHECK: Please don't use multiple blank lines CHECK: Please use a blank line after function/struct/union/enum declarations There are no code changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rtlwifi: rtl8192ce: Fix missing blank linesLarry Finger
The problems filed include the following: WARNING: Missing a blank line after declarations CHECK: Please don't use multiple blank lines There are no code changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rtlwifi: Fix all blank line irregularities in main code filesLarry Finger
The types of problems fixed are as follows: WARNING: Missing a blank line after declarations CHECK: Please use a blank line after function/struct/union/enum declarations CHECK: Please don't use multiple blank lines There are no code changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rtlwifi: Fix blank line errors in main header filesLarry Finger
The errors consist of multiple blank lines, and a missing blank line after the declarations. There are no code changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rtlwifi: Fix alignment errors in wifi.hLarry Finger
The instances where statement continuations are improperly aligned have been fixed. There are no changes to generated code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rtlwifi: Fix problems with block comments in wifi.hLarry Finger
Checkpatch.pl reports a number of problems with block comments. These changes do not affect the generated code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rtlwifi: Fix errors in spacing in wifi.hLarry Finger
Checkpatch.pl report problems in wifi.h where spaces are missing, as well as extraneous spaces. There are no changes in the generated code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rsi: fix missing null pointer check from a failed ieee80211_probereq_get callColin Ian King
The call to ieee80211_probereq_get can return NULL if a skb allocation fails, so add a null pointer check and free an earlier skb on the error exit return path. Fixes: 7fdcb8e12660 ("rsi: add support for hardware scan offload") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28mmc: core: Add a debug print when the card may have been replacedhongjiefang
If the card was removed in suspended state and a new one was inserted, print a debug log when the check detects that it's not the old card. Signed-off-by: hongjiefang <hongjiefang@asrmicro.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-28brcmfmac: print firmware reported general status errorsRafał Miłecki
Firmware may report general errors using a special message type. Add basic support for it by simply decoding & printing an error number. A sample situation in which firmware reports a buf error: CONSOLE: 027084.733 no host response IOCTL buffer available..so fail the request will now produce a "Firmware reported general error: 9" on the host. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28brcmfmac: fix size of the struct msgbuf_ring_statusRafał Miłecki
This updates host struct to match the in-firmawre definition. It's a cosmetic change as it only applies to the reserved struct space. Fixes: c988b78244df ("brcmfmac: print firmware reported ring status errors") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28Merge branch 'fixes' into nextUlf Hansson
2019-02-28mmc: core: Add sd discard timeoutAvri Altman
The busy timeout is 250msec per discard command. Signed-off-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-28mmc: core: Add discard support to sdAvri Altman
SD spec v5.1 adds discard support. The flows and commands are similar to mmc, so just set the discard arg in CMD38. A host which supports DISCARD shall check if the DISCARD_SUPPORT (b313) is set in the SD_STATUS register. If the card does not support discard, the host shall not issue DISCARD command, but ERASE command instead. Post the DISCARD operation, the card may de-allocate the discarded blocks partially or completely. So the host mustn't make any assumptions concerning the content of the discarded region. This is unlike ERASE command, in which the region is guaranteed to contain either '0's or '1's, depends on the content of DATA_STAT_AFTER_ERASE (b55) in the scr register. One more important difference compared to ERASE is the busy timeout which we will address on the next patch. Signed-off-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-28mmc: sdhci-esdhc-imx: clear the HALT bit when enable CQEBOUGH CHEN
After system suspend, CQE is in cqhci_off state, which set the HALT bit, make CQE in HALT state. If the SoC do not power down the USDHC module, then when system resume back, this bit keep the same, still set. Though there is a sdhci reset during sdhci_resume_host(), but this reset do not impact the CQE part, so need to clear this bit when enable CQE, otherwise CQE will stuck in the first CMDQ request after system resume back. Find this issue on NXP i.MX845s-mek board [ 105.919862] mmc2: cqhci: timeout for tag 6 [ 105.923965] mmc2: cqhci: ============ CQHCI REGISTER DUMP =========== [ 105.930407] mmc2: cqhci: Caps: 0x0000310a | Version: 0x00000510 [ 105.936847] mmc2: cqhci: Config: 0x00001001 | Control: 0x00000001 [ 105.943286] mmc2: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006 [ 105.949725] mmc2: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000 [ 105.956164] mmc2: cqhci: TDL base: 0x7809b000 | TDL up32: 0x00000000 [ 105.962604] mmc2: cqhci: Doorbell: 0x00000040 | TCN: 0x00000000 [ 105.969043] mmc2: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x00000000 [ 105.975483] mmc2: cqhci: Task clr: 0x00000000 | SSC1: 0x00011000 [ 105.981922] mmc2: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000000 [ 105.988362] mmc2: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000 [ 105.994801] mmc2: cqhci: Resp idx: 0x00000000 | Resp arg: 0x00000000 [ 106.001240] mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== [ 106.007680] mmc2: sdhci: Sys addr: 0xb2b37800 | Version: 0x00000002 [ 106.014120] mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000001 [ 106.020560] mmc2: sdhci: Argument: 0x00010000 | Trn mode: 0x00000013 [ 106.026999] mmc2: sdhci: Present: 0x01f88008 | Host ctl: 0x00000030 [ 106.033439] mmc2: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 [ 106.039878] mmc2: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f [ 106.046318] mmc2: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 [ 106.052757] mmc2: sdhci: Int enab: 0x107f4000 | Sig enab: 0x107f4000 [ 106.059196] mmc2: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000502 [ 106.065635] mmc2: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407 [ 106.072075] mmc2: sdhci: Cmd: 0x00000d1a | Max curr: 0x00ffffff [ 106.078514] mmc2: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x31360181 [ 106.084954] mmc2: sdhci: Resp[2]: 0x44473430 | Resp[3]: 0x00450100 [ 106.091392] mmc2: sdhci: Host ctl2: 0x00000008 [ 106.095836] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x7804b208 [ 106.102274] mmc2: sdhci: ============================================ [ 106.108785] mmc2: running CQE recovery Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-28mmc: core: do not retry CMD6 in __mmc_switch()Chaotian Jing
the response type of CMD6 is R1B, when the first CMD6 gets response CRC error, do retry may get timeout error due to card may still in busy state, which cause this retry make no sense. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-28Staging: vt6655: Modify comment style of SPDX License IdentifierMadhumitha Prabakaran
Fix the comment style of SPDX license identifier based on header file type Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28Staging: vt6655: Modify comment style for SPDX-License-IdentifierMadhumitha Prabakaran
Fix the comment style for SPDX-License-Identifier, as the file type is header. Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28Staging: vt6655: Align a function declarationMadhumitha Prabakaran
Align function return type and function arguments to improve readability. Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28Staging: vt6655: Alignment of function declarationMadhumitha Prabakaran
Align function arguments and function type to improve readability. Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28staging: rtl8712: Fix indentation issuePrashanth Kumar KR
Fix indentation warning reported by checkpatch Signed-off-by: Prashanth Kumar KR <prashanthkr8@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-14 18:54:08 +0000