| Age | Commit message (Collapse) | Author |
|---|
|
The devfn of 00:02.0 is 0x10. devfn_to_wslot(0x10) == 0x2, and
wslot_to_devfn(0x2) should be 0x10, while it's 0x2 in the current code.
Due to this, hv_eject_device_work() -> pci_get_domain_bus_and_slot()
returns NULL and pci_stop_and_remove_bus_device() is not called.
Later when the real device driver's .remove() is invoked by
hv_pci_remove() -> pci_stop_root_bus(), some warnings can be noticed
because the VM has lost the access to the underlying device at that
time.
Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
CC: stable@vger.kernel.org
CC: K. Y. Srinivasan <kys@microsoft.com>
CC: Stephen Hemminger <sthemmin@microsoft.com>
|
|
Function __pci_device_probe() tries to be careful about a PCI driver
probe() hook returning a positive value, but this is not really necessary,
since the same fix up is already done in local_pci_probe() (preceded by a
noisy warning), which renders this instance dead code.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Add maintainers for this tunnel driver. Include main osmocom.org mailist
list too.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
udp_ioctl(), as its name suggests, is used by UDP protocols,
but is also used by L2TP :(
L2TP should use its own handler, because it really does not
look the same.
SIOCINQ for instance should not assume UDP checksum or headers.
Thanks to Andrey and syzkaller team for providing the report
and a nice reproducer.
While crashes only happen on recent kernels (after commit
7c13f97ffde6 ("udp: do fwd memory scheduling on dequeue")), this
probably needs to be backported to older kernels.
Fixes: 7c13f97ffde6 ("udp: do fwd memory scheduling on dequeue")
Fixes: 85584672012e ("udp: Fix udp_poll() and ioctl()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Mickaël Salaün says:
====================
Improve BPF selftests and use the library (net-next tree)
This series brings some fixes to selftests, add the ability to test
unprivileged BPF programs as root and replace bpf_sys.h with calls to the BPF
library.
This is intended for the net-next tree and apply on c0e4dadb3494 ("net: dsa:
mv88e6xxx: Move forward declaration to where it is needed").
Changes since v4:
* align text for function calls as requested by Daniel Borkmann
(bpf_load_program and bpf_map_update_elem)
* rebase
Changes since v3:
* keep the bzero() calls
Changes since v2:
* use the patches from two previous series (unprivileged tests and bpf_sys.h
replacement)
* include one more stdint.h
* rebase on net-next
* add this cover letter
Changes since v1:
* exclude patches not intended for the net-next tree
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add require dependency headers.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace bpf_map_create() with bpf_create_map() calls.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace bpf_map_next_key() with bpf_map_get_next_key() calls.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace bpf_map_delete() with bpf_map_delete_elem() calls.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace bpf_map_lookup() with bpf_map_lookup_elem() calls.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace bpf_map_update() with bpf_map_update_elem() calls.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace bpf_prog_load() with bpf_load_program() calls.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If selftests are run as root, then execute the unprivileged checks as
well. This switch from 243 to 368 tests.
The test numbers are suffixed with "/u" when executed as unprivileged or
with "/p" when executed as privileged.
The geteuid() check is replaced with a capability check.
Handling capabilities requires the libcap dependency.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the tools include directory instead of the installed one to allow
builds from other kernels.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The tools version of this header is out of date; update it to the latest
version from kernel header.
Synchronize with the following commits:
* b95a5c4db09b ("bpf: add a longest prefix match trie map implementation")
* a5e8c07059d0 ("bpf: add bpf_probe_read_str helper")
* d1b662adcdb8 ("bpf: allow option for setting bpf_l4_csum_replace from scratch")
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Daniel Mack <daniel@zonque.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gianluca Borello <g.borello@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.10
|
|
Jakub Kicinski says:
====================
Netronome NFP4000 and NFP6000 PF driver
This is a base PF driver for Netronome NFP4000 and NFP6000 chips. This
series doesn't add any exciting new features, it provides a foundation
for supporting more advanced firmware applications.
Patch 1 moves a bitfield-related helper from our BPF code to the global
header.
Patch 2 renames the kernel module and adds a new main file. We were
considering 3-module approach (pf, vf, common netdev library) but
ultimately settled on a single module to keep things simple.
Patch 3 adds support for accessing chip internals. It provides a way of
configuring access windows to different parts of chip memory and issuing
pretty much any commands on chip's NoC.
Patches 4, 5, 6, 7, 8 provide support for accessing and interpreting
various hardware and firmware information structures.
Patch 9 introduces service processor (NSP) ABI. This ABI gives us
access to PHY/SFP module configuration and information as well as
methods for unloading and loading application firmware.
Patches 10 and 11 modify the existing netdev code to make it possible
to support multi-port devices (sharing a PCI device).
Patch 12 adds a new driver probe path which will be used for the PF
PCI device IDs. It utilizes the newly added infrastructure and is able
to load application FW and spawn netdevs for all card's ports.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add PF driver for NFP4000 and NFP6000.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PF services multiple ports using single PCI device therefore
IRQs can no longer be allocated in the netdev code. Lower
portion of the driver has to allocate the IRQs and hand them
out to ports.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PF driver will support multiple ports per PCI device, add port
number to DebugFS paths.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
NFP Service Processor (NSP) is an ARM core inside the chip which
is responsible for management and control functions. Add support
for chip reset, FW load and external module access using the NSP.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for using application FW symbol table to look up
location of information in device memory.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MIP is a vector of information which linker can optionally include
in application firmware. It will be used to retrieve the location
of symbol tables.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
NFFW info is a resource which contains information about
the loaded application firmware. Add code which will allow
us to decode it and retrieve MIP location.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hwinfo is a simple key=value store of information which is read
from the flash and populated during chip power on. Add code to
look up information in it.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Resource table is an array placed in a well defined location
in device's memory which describes device resources and contains
locks which have to be acquired to use them.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Command Push Pull is the name of NFP's network on a chip.
PCIe PF can access the interconnect through a number of mappings
controlled via Base Access Registers. BARs allow the PF to issue
pretty much any command or address any memory on the chip.
Add appropriate logic and a handful of helper for simple operations
like reading scalars from memories.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Support for the PF driver is about to be added and will share
much of the code. When the VF driver was added we planned to
maintain the PF driver as a separate module but have decided
that for our simple use case just maintaining a single module
is more reasonable. Rename the driver to just "nfp" and update
the Kconfig.
While at it remove latent references to NFP3200.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a helper for checking at runtime that a value will fit inside
a specified field/mask.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Per PCIe r3.1, sec 6.2.10 and sec 7.13.4, on Root Ports that support "RP
Extensions for DPC",
When the DPC Trigger Status bit is Set and the DPC RP Busy bit is Set,
software must leave the Root Port in DPC until the DPC RP Busy bit reads
0b.
Wait up to 1 second for the Root Port to become non-busy.
[bhelgaas: changelog, spec references]
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Decode the currently defined extended event reasons rather than just using
the generic "extended" explanation.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Just call the msi_* version directly instead of having trivial wrappers for
one or two callsites.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
|
|
pci_msi_create_default_irq_domain() is never called in the whole tree, so
remove it as well as all the supporting code for a default PCI MSI domain.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Remove support for vendor-defined messages which are not supported by AXI.
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
If alloc_msi_entry() fails, we free resources and set ret = -ENOMEM.
However, msix_setup_entries() returns 0 unconditionally. Return the error
code instead.
Fixes: e75eafb9b039 ("genirq/msi: Switch to new irq spreading infrastructure")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Jiri Pirko says:
====================
devlink: small cleanup around eswitch [sg]et
Contains small devlink cleanup around eswitch get/set commands.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Even when mode_get op is not present, other eswitch attrs need to be
filled-up.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Be aligned with the rest of the code and use label named nla_put_failure.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Be aligned with the rest of the file and name the helper function
accordingly.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The eswitch_[gs]et command is supposed to be similar to port_[gs]et
command - for multiple eswitch attributes. However, when it was introduced
by 08f4b5918b2d ("net/devlink: Add E-Switch mode control") it was wrongly
named with the word "mode" in it. So fix this now, make the oririnal
enum value existing but obsolete.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Some more updates:
* use shash in mac80211 crypto code where applicable
* some documentation fixes
* pass RSSI levels up in change notifications
* remove unused rfkill-regulator
* various other cleanups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
The GLOB operation "~" should be able to work with the COMM filter key in
order to trace programs with a glob. For example
echo 'COMM ~ "systemd*"' > events/syscalls/filter
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If the irq_desc being output does not have a domain associated the
information following the 'name' is not aligned correctly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Link: http://lkml.kernel.org/r/20170210165416.5629-1-hsweeten@visionengravers.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The transport lock is needed to protect the xprt_adjust_cwnd() call
in xs_udp_timer, but it is not necessary for accessing the
rq_reply_bytes_recvd or tk_status fields. It is correct to sublimate
the lock into UDP's xs_udp_timer method, where it is required.
The ->timer method has to take the transport lock if needed, but it
can now sleep safely, or even call back into the RPC scheduler.
This is more a clean-up than a fix, but the "issue" was introduced
by my transport switch patches back in 2005.
Fixes: 46c0ee8bc4ad ("RPC: separate xprt_timer implementations")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up some duplicate code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
A server rejects a connection attempt with STALE_CONNECTION when a
client attempts to connect to a working remote service, but uses a
QPN and GUID that corresponds to an old connection that was
abandoned. This might occur after a client crashes and restarts.
Fix rpcrdma_conn_upcall() to distinguish between a normal rejection
and rejection of stale connection parameters.
As an additional clean-up, remove the code that retries the
connection attempt with different ORD/IRD values. Code audit of
other ULP initiators shows no similar special case handling of
initiator_depth or responder_resources.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Sriharsha (sriharsha.basavapatna@broadcom.com) reports an occasional
double DMA unmap of an FRWR MR when a connection is lost. I see one
way this can happen.
When a request requires more than one segment or chunk,
rpcrdma_marshal_req loops, invoking ->frwr_op_map for each segment
(MR) in each chunk. Each call posts a FASTREG Work Request to
register one MR.
Now suppose that the transport connection is lost part-way through
marshaling this request. As part of recovering and resetting that
req, rpcrdma_marshal_req invokes ->frwr_op_unmap_safe, which hands
all the req's registered FRWRs to the MR recovery thread.
But note: FRWR registration is asynchronous. So it's possible that
some of these "already registered" FRWRs are fully registered, and
some are still waiting for their FASTREG WR to complete.
When the connection is lost, the "already registered" frmrs are
marked FRMR_IS_VALID, and the "still waiting" WRs flush. Then
frwr_wc_fastreg marks these frmrs FRMR_FLUSHED_FR.
But thanks to ->frwr_op_unmap_safe, the MR recovery thread is doing
an unreg / alloc_mr, a DMA unmap, and marking each of these frwrs
FRMR_IS_INVALID, at the same time frwr_wc_fastreg might be running.
- If the recovery thread runs last, then the frmr is marked
FRMR_IS_INVALID, and life continues.
- If frwr_wc_fastreg runs last, the frmr is marked FRMR_FLUSHED_FR,
but the recovery thread has already DMA unmapped that MR. When
->frwr_op_map later re-uses this frmr, it sees it is not marked
FRMR_IS_INVALID, and tries to recover it before using it, resulting
in a second DMA unmap of the same MR.
The fix is to guarantee in-flight FASTREG WRs have flushed before MR
recovery runs on those FRWRs. Thus we depend on ro_unmap_safe
(called from xprt_rdma_send_request on retransmit, or from
xprt_rdma_free) to clean up old registrations as needed.
Reported-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
We no longer need to accommodate an xdr_buf whose pages start at an
offset and cross extra page boundaries. If there are more partial or
whole pages to send than there are available SGEs, the marshaling
logic is now smart enough to use a Read chunk instead of failing.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
