| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit 796eed4b2342c9d6b26c958e92af91253a2390e1.
This change causes boot lockups when using "arlyprintk=xdbc" because
ktime can not be used at this point in time in the boot process. Also,
it is not needed for very small delays like this.
Reported-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Cc: Jann Horn <jannh@google.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Fixes: 796eed4b2342 ("usb: early: convert to readl_poll_timeout_atomic()")
Link: https://lore.kernel.org/r/c2b5c9bb-1b75-bf56-3754-b5b18812d65e@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
Some new drivers changes for the Allwinner SoCs, fixing the shutdown
path of the RSB driver
* tag 'sunxi-drivers-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
bus: sunxi-rsb: Fix shutdown
Link: https://lore.kernel.org/r/6f2f75ad-de62-49a4-82a4-8655a567a09e.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
One patch to fix the GMAC PHY mode on the OrangePi Zero Plus
* tag 'sunxi-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: orangepi-zero-plus: fix PHY mode
Link: https://lore.kernel.org/r/e295f1f7-cd24-4a7a-ae83-aafb2a3263b6.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
TEE and OP-TEE fixes for v5.16
- Fixes a race when a tee_shm reaches reference count 0 and is about to
be teared down
- Fixes an incorrect page free bug in an error path of the OP-TEE shared
memory pool handling
- Suppresses a false positive kmemleak report when allocating driver
private shared memory buffers for OP-TEE
* tag 'fixes-for-v5.16' of https://git.linaro.org/people/jens.wiklander/linux-tee:
optee: Suppress false positive kmemleak report in optee_handle_rpc()
tee: optee: Fix incorrect page free bug
tee: handle lookup of shm with reference count 0
Link: https://lore.kernel.org/r/20211216150745.GA3347954@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Thumb2 version of the FP exception handling entry code treats the
register holding the CP number (R8) differently, resulting in the iWMMXT
CP number check to be incorrect.
Fix this by unifying the ARM and Thumb2 code paths, and switch the
order of the additions of the TI_USED_CP offset and the shifted CP
index.
Cc: <stable@vger.kernel.org>
Fixes: b86040a59feb ("Thumb-2: Implementation of the unified start-up and exceptions code")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
__secondary_data used to reside in r7 around call to
PROCINFO_INITFUNC. After commit 95731b8ee63e ("ARM: 9059/1: cache-v7:
get rid of mini-stack") r7 is used as a scratch register, so we have
to reload __secondary_data before we setup the stack pointer.
Fixes: 95731b8ee63e ("ARM: 9059/1: cache-v7: get rid of mini-stack")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix UAF in set catch-all element, from Eric Dumazet.
2) Fix MAC mangling for multicast/loopback traffic in nfnetlink_queue
and nfnetlink_log, from Ignacy Gawędzki.
3) Remove expired entries from ctnetlink dump path regardless the tuple
direction, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
bo->tbo.resource can now be NULL.
Signed-off-by: Christian König <christian.koenig@amd.com>
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1811
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210083927.1754-1-christian.koenig@amd.com
|
|
The double 'as' in a comment is repeated, thus it should be removed.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove unneeded variable used to store return value.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.16-rc6
Here's a fix for a reported problem in the cp210x gpio-registration code
and some more modem device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.16-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit FN990 compositions
USB: serial: cp210x: fix CP2105 GPIO registration
|
|
Update my email address from damien.lemoal@wdc.com to
damien.lemoal@opensource.wdc.com.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Add MODULE_ALIAS_FS() to load the module automatically when you do "mount
-t zonefs".
Fixes: 8dcc1a9d90c1 ("fs: New zonefs file system")
Cc: stable <stable@vger.kernel.org> # 5.6+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Fixes the following probe warning:
lm90 0-004c: Looking up vcc-supply from device tree
lm90 0-004c: Looking up vcc-supply property in node /soc/i2c@10030000/temperature-sensor@4c failed
lm90 0-004c: supply vcc not found, using dummy regulator
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The existing values are rejected by the da9063 regulator driver, as they
are unachievable with the declared chip setup (non-merged vcore and bmem
are unable to provide the declared curent).
Fix voltages to match rev3 schematics, which also matches their boot-up
configuration within the chip's available precision.
Declare bcore1/bcore2 and bmem/bio as merged.
Set ldo09 and ldo10 as always-on as their consumers are not declared but
exist.
Drop ldo current limits as there is no current limit feature for these
regulators in the DA9063. Fixes warnings like:
DA9063_LDO3: Operation of current configuration missing
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
These sub-functions are available in the chip revision on this board, so
expose them.
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Mark it as read-only as it is factory-programmed with identifying
information, and no executable nor configuration:
- eth MAC address
- board model (PCB version, BoM version)
- board serial number
Accidental modification would cause misidentification which could brick
the board, so marking read-only seem like both a safe and non-constraining
choice.
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Follow the pin descriptions given in the version 3 of the board schematics.
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.16-2021-12-15:
amdgpu:
- Fix RLC register offset
- GMC fix
- Properly cache SMU FW version on Yellow Carp
- Fix missing callback on DCN3.1
- Reset DMCUB before HW init
- Fix for GMC powergating on PCO
- Fix a possible memory leak in GPU metrics table handling on RN
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211216035239.5787-1-alexander.deucher@amd.com
|
|
RX fencing allows the driver to know that any prior change to the RQs has
finished, e.g. when the RQs are disabled/enabled or the hashkey/indirection
table are changed, RX fencing is required.
Remove the previous workaround "ssleep(1)" and add the real support for
RX fencing as the PF driver supports the MANA_FENCE_RQ request now (any
old PF driver not supporting the request won't be used in production).
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/20211216001748.8751-1-decui@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eliminate the following coccicheck warning:
./drivers/net/ethernet/vertexcom/mse102x.c:414:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20211216015433.83383-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current use of circular buffer to manage stats_context_id is
very obscure, and it will cause problem if its element size is
not power of two. So change the use more straightforward and
scalable, and also change that for mask_id to keep consistency.
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/1639618621-5857-1-git-send-email-yinjun.zhang@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes
One null pointer dereference fix for ast, a pixel clock unit fix for
simpledrm and a user-space regression revert for fb-helper
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211216082603.pm6yzlckmxvwnqyv@houat
|
|
The "mybuf" string comes from the user, so we need to ensure that it is NUL
terminated.
Link: https://lore.kernel.org/r/20211214070527.GA27934@kili
Fixes: bd2cdd5e400f ("scsi: lpfc: NVME Initiator: Add debugfs support")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Backtracking information is very verbose, don't print it in log
level 1 to improve readability.
Signed-off-by: Christy Lee <christylee@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211216213358.3374427-4-christylee@fb.com
|
|
Make the verifier logs more readable, print the verifier states
on the corresponding instruction line. If the previous line was
not a bpf instruction, then print the verifier states on its own
line.
Before:
Validating test_pkt_access_subprog3() func#3...
86: R1=invP(id=0) R2=ctx(id=0,off=0,imm=0) R10=fp0
; int test_pkt_access_subprog3(int val, struct __sk_buff *skb)
86: (bf) r6 = r2
87: R2=ctx(id=0,off=0,imm=0) R6_w=ctx(id=0,off=0,imm=0)
87: (bc) w7 = w1
88: R1=invP(id=0) R7_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
; return get_skb_len(skb) * get_skb_ifindex(val, skb, get_constant(123));
88: (bf) r1 = r6
89: R1_w=ctx(id=0,off=0,imm=0) R6_w=ctx(id=0,off=0,imm=0)
89: (85) call pc+9
Func#4 is global and valid. Skipping.
90: R0_w=invP(id=0)
90: (bc) w8 = w0
91: R0_w=invP(id=0) R8_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
; return get_skb_len(skb) * get_skb_ifindex(val, skb, get_constant(123));
91: (b7) r1 = 123
92: R1_w=invP123
92: (85) call pc+65
Func#5 is global and valid. Skipping.
93: R0=invP(id=0)
After:
86: R1=invP(id=0) R2=ctx(id=0,off=0,imm=0) R10=fp0
; int test_pkt_access_subprog3(int val, struct __sk_buff *skb)
86: (bf) r6 = r2 ; R2=ctx(id=0,off=0,imm=0) R6_w=ctx(id=0,off=0,imm=0)
87: (bc) w7 = w1 ; R1=invP(id=0) R7_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
; return get_skb_len(skb) * get_skb_ifindex(val, skb, get_constant(123));
88: (bf) r1 = r6 ; R1_w=ctx(id=0,off=0,imm=0) R6_w=ctx(id=0,off=0,imm=0)
89: (85) call pc+9
Func#4 is global and valid. Skipping.
90: R0_w=invP(id=0)
90: (bc) w8 = w0 ; R0_w=invP(id=0) R8_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
; return get_skb_len(skb) * get_skb_ifindex(val, skb, get_constant(123));
91: (b7) r1 = 123 ; R1_w=invP123
92: (85) call pc+65
Func#5 is global and valid. Skipping.
93: R0=invP(id=0)
Signed-off-by: Christy Lee <christylee@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When printing verifier state for any log level, print full verifier
state only on function calls or on errors. Otherwise, only print the
registers and stack slots that were accessed.
Log size differences:
verif_scale_loop6 before: 234566564
verif_scale_loop6 after: 72143943
69% size reduction
kfree_skb before: 166406
kfree_skb after: 55386
69% size reduction
Before:
156: (61) r0 = *(u32 *)(r1 +0)
157: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1=ctx(id=0,off=0,imm=0) R2_w=invP0 R10=fp0 fp-8_w=00000000 fp-16_w=00\
000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000 fp-56_w=00000000 fp-64_w=00000000 fp-72_w=00000000 fp-80_w=00000\
000 fp-88_w=00000000 fp-96_w=00000000 fp-104_w=00000000 fp-112_w=00000000 fp-120_w=00000000 fp-128_w=00000000 fp-136_w=00000000 fp-144_w=00\
000000 fp-152_w=00000000 fp-160_w=00000000 fp-168_w=00000000 fp-176_w=00000000 fp-184_w=00000000 fp-192_w=00000000 fp-200_w=00000000 fp-208\
_w=00000000 fp-216_w=00000000 fp-224_w=00000000 fp-232_w=00000000 fp-240_w=00000000 fp-248_w=00000000 fp-256_w=00000000 fp-264_w=00000000 f\
p-272_w=00000000 fp-280_w=00000000 fp-288_w=00000000 fp-296_w=00000000 fp-304_w=00000000 fp-312_w=00000000 fp-320_w=00000000 fp-328_w=00000\
000 fp-336_w=00000000 fp-344_w=00000000 fp-352_w=00000000 fp-360_w=00000000 fp-368_w=00000000 fp-376_w=00000000 fp-384_w=00000000 fp-392_w=\
00000000 fp-400_w=00000000 fp-408_w=00000000 fp-416_w=00000000 fp-424_w=00000000 fp-432_w=00000000 fp-440_w=00000000 fp-448_w=00000000
; return skb->len;
157: (95) exit
Func#4 is safe for any args that match its prototype
Validating get_constant() func#5...
158: R1=invP(id=0) R10=fp0
; int get_constant(long val)
158: (bf) r0 = r1
159: R0_w=invP(id=1) R1=invP(id=1) R10=fp0
; return val - 122;
159: (04) w0 += -122
160: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1=invP(id=1) R10=fp0
; return val - 122;
160: (95) exit
Func#5 is safe for any args that match its prototype
Validating get_skb_ifindex() func#6...
161: R1=invP(id=0) R2=ctx(id=0,off=0,imm=0) R3=invP(id=0) R10=fp0
; int get_skb_ifindex(int val, struct __sk_buff *skb, int var)
161: (bc) w0 = w3
162: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1=invP(id=0) R2=ctx(id=0,off=0,imm=0) R3=invP(id=0) R10=fp0
After:
156: (61) r0 = *(u32 *)(r1 +0)
157: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1=ctx(id=0,off=0,imm=0)
; return skb->len;
157: (95) exit
Func#4 is safe for any args that match its prototype
Validating get_constant() func#5...
158: R1=invP(id=0) R10=fp0
; int get_constant(long val)
158: (bf) r0 = r1
159: R0_w=invP(id=1) R1=invP(id=1)
; return val - 122;
159: (04) w0 += -122
160: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
; return val - 122;
160: (95) exit
Func#5 is safe for any args that match its prototype
Validating get_skb_ifindex() func#6...
161: R1=invP(id=0) R2=ctx(id=0,off=0,imm=0) R3=invP(id=0) R10=fp0
; int get_skb_ifindex(int val, struct __sk_buff *skb, int var)
161: (bc) w0 = w3
162: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R3=invP(id=0)
Signed-off-by: Christy Lee <christylee@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211216213358.3374427-2-christylee@fb.com
|
|
The QAT driver does not have support for PFVF interrupts for GEN4
devices, therefore report the vf2pf sources as 0.
This prevents a NULL pointer dereference in the function
adf_msix_isr_ae() if the device triggers a spurious interrupt.
Fixes: 993161d36ab5 ("crypto: qat - fix handling of VF to PF interrupts")
Reported-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Avoid data corruption by rejecting pass-through commands where
T_LENGTH is zero (No data is transferred) and the dma direction
is not DMA_NONE.
Cc: <stable@vger.kernel.org>
Reported-by: syzkaller<syzkaller@googlegroups.com>
Signed-off-by: George Kennedy<george.kennedy@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"A single patch to fix a problem where the audit queue could grow
unbounded when the audit daemon is forcibly stopped"
* tag 'audit-pr-20211216' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: improve robustness of the audit queue handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from mac80211, wifi, bpf.
Relatively large batches of fixes from BPF and the WiFi stack, calm in
general networking.
Current release - regressions:
- dpaa2-eth: fix buffer overrun when reporting ethtool statistics
Current release - new code bugs:
- bpf: fix incorrect state pruning for <8B spill/fill
- iavf:
- add missing unlocks in iavf_watchdog_task()
- do not override the adapter state in the watchdog task (again)
- mlxsw: spectrum_router: consolidate MAC profiles when possible
Previous releases - regressions:
- mac80211 fixes:
- rate control, avoid driver crash for retransmitted frames
- regression in SSN handling of addba tx
- a memory leak where sta_info is not freed
- marking TX-during-stop for TX in in_reconfig, prevent stall
- cfg80211: acquire wiphy mutex on regulatory work
- wifi drivers: fix build regressions and LED config dependency
- virtio_net: fix rx_drops stat for small pkts
- dsa: mv88e6xxx: unforce speed & duplex in mac_link_down()
Previous releases - always broken:
- bpf fixes:
- kernel address leakage in atomic fetch
- kernel address leakage in atomic cmpxchg's r0 aux reg
- signed bounds propagation after mov32
- extable fixup offset
- extable address check
- mac80211:
- fix the size used for building probe request
- send ADDBA requests using the tid/queue of the aggregation
session
- agg-tx: don't schedule_and_wake_txq() under sta->lock, avoid
deadlocks
- validate extended element ID is present
- mptcp:
- never allow the PM to close a listener subflow (null-defer)
- clear 'kern' flag from fallback sockets, prevent crash
- fix deadlock in __mptcp_push_pending()
- inet_diag: fix kernel-infoleak for UDP sockets
- xsk: do not sleep in poll() when need_wakeup set
- smc: avoid very long waits in smc_release()
- sch_ets: don't remove idle classes from the round-robin list
- netdevsim:
- zero-initialize memory for bpf map's value, prevent info leak
- don't let user space overwrite read only (max) ethtool parms
- ixgbe: set X550 MDIO speed before talking to PHY
- stmmac:
- fix null-deref in flower deletion w/ VLAN prio Rx steering
- dwmac-rk: fix oob read in rk_gmac_setup
- ice: time stamping fixes
- systemport: add global locking for descriptor life cycle"
* tag 'net-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (89 commits)
bpf, selftests: Fix racing issue in btf_skc_cls_ingress test
selftest/bpf: Add a test that reads various addresses.
bpf: Fix extable address check.
bpf: Fix extable fixup offset.
bpf, selftests: Add test case trying to taint map value pointer
bpf: Make 32->64 bounds propagation slightly more robust
bpf: Fix signed bounds propagation after mov32
sit: do not call ipip6_dev_free() from sit_init_net()
net: systemport: Add global locking for descriptor lifecycle
net/smc: Prevent smc_release() from long blocking
net: Fix double 0x prefix print in SKB dump
virtio_net: fix rx_drops stat for small pkts
dsa: mv88e6xxx: fix debug print for SPEED_UNFORCED
sfc_ef100: potential dereference of null pointer
net: stmmac: dwmac-rk: fix oob read in rk_gmac_setup
net: usb: lan78xx: add Allied Telesis AT29M2-AF
net/packet: rx_owner_map depends on pg_vec
netdevsim: Zero-initialize memory for new map's value in function nsim_bpf_map_alloc
dpaa2-eth: fix ethtool statistics
ixgbe: set X550 MDIO speed before talking to PHY
...
|
|
Jakub Kicinski says:
====================
Changes to bpf.h tend to clog up our build systems. The netdev/bpf
build bot does incremental builds to save time (reusing the build
directory to only rebuild changed objects).
This is the rough breakdown of how many objects needs to be rebuilt
based on file touched:
kernel.h 40633
bpf.h 17881
bpf-cgroup.h 17875
skbuff.h 10696
bpf-netns.h 7604
netdevice.h 7452
filter.h 5003
sock.h 4959
tcp.h 4048
As the stats show touching bpf.h is _very_ expensive.
Bulk of the objects get rebuilt because MM includes cgroup headers.
Luckily bpf-cgroup.h does not fundamentally depend on bpf.h so we
can break that dependency and reduce the number of objects.
With the patches applied touching bpf.h causes 5019 objects to be rebuilt
(17881 / 5019 = 3.56x). That's pretty much down to filter.h plus noise.
v2:
Try to make the new headers wider in scope. Collapse bpf-link and
bpf-cgroup-types into one header, which may serve as "BPF kernel
API" header in the future if needed. Rename bpf-cgroup-storage.h
to bpf-inlines.h.
Add a fix for the s390 build issue.
v3: https://lore.kernel.org/all/20211215061916.715513-1-kuba@kernel.org/
Merge bpf-includes.h into bpf.h.
v4: https://lore.kernel.org/all/20211215181231.1053479-1-kuba@kernel.org/
Change course - break off cgroup instead of breaking off bpf.
v5:
Add forward declaration of struct bpf_prog to perf_event.h
when !CONFIG_BPF_SYSCALL (kbuild bot).
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Remove the dependency from cgroup-defs.h to bpf-cgroup.h and bpf.h.
This reduces the incremental build size of x86 allmodconfig after
bpf.h was touched from ~17k objects rebuilt to ~5k objects.
bpf.h is 2.2kLoC and is modified relatively often.
We need a new header with just the definition of struct cgroup_bpf
and enum cgroup_bpf_attach_type, this is akin to cgroup-defs.h.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/bpf/20211216025538.1649516-4-kuba@kernel.org
|
|
We're about to break the cgroup-defs.h -> bpf-cgroup.h dependency,
make sure those who actually need more than the definition of
struct cgroup_bpf include bpf-cgroup.h explicitly.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/bpf/20211216025538.1649516-3-kuba@kernel.org
|
|
cgroup pulls in BPF which pulls in a lot of includes.
We're about to break that chain so fix those who were
depending on it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211216025538.1649516-2-kuba@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a number of DT fixes, mostly for mistakes found through
static checking of the dts files again, as well as a couple of minor
changes to address incorrect DT settings.
For i.MX, there is yet another series of devitree changes to update
RGMII delay settings for ethernet, which is an ongoing problem after
some driver changes.
For SoC specific device drivers, a number of smaller fixes came up:
- i.MX SoC identification was incorrectly registered non-i.MX
machines when the driver is built-in
- One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work
properly
- a few compile fixes for warnings that get in the way of -Werror
- a string overflow in the scpi firmware driver
- a boot failure with FORTIFY_SOURCE on Rockchips machines
- broken error handling in the AMD TEE driver
- a revert for a tegra reset driver commit that broke HDA"
* tag 'soc-fixes-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
soc/tegra: fuse: Fix bitwise vs. logical OR warning
firmware: arm_scpi: Fix string overflow in SCPI genpd driver
soc: imx: Register SoC device only on i.MX boards
soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset
ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name
arm64: dts: imx8mq: remove interconnect property from lcdif
ARM: socfpga: dts: fix qspi node compatible
arm64: dts: apple: add #interrupt-cells property to pinctrl nodes
dt-bindings: i2c: apple,i2c: allow multiple compatibles
arm64: meson: remove COMMON_CLK
arm64: meson: fix dts for JetHub D1
tee: amdtee: fix an IS_ERR() vs NULL bug
arm64: dts: apple: change ethernet0 device type to ethernet
arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys
arm64: dts: rockchip: fix poweroff on helios64
arm64: dts: rockchip: fix audio-supply for Rock Pi 4
arm64: dts: rockchip: fix rk3399-leez-p710 vcc3v3-lan supply
arm64: dts: rockchip: fix rk3308-roc-cc vcc-sd supply
arm64: dts: rockchip: remove mmc-hs400-enhanced-strobe from rk3399-khadas-edge
ARM: rockchip: Use memcpy_toio instead of memcpy on smp bring-up
...
|
|
selinux_sb_mnt_opts_compat() is called via sget_fc() under the sb_lock
spinlock, so it can't use GFP_KERNEL allocations:
[ 868.565200] BUG: sleeping function called from invalid context at
include/linux/sched/mm.h:230
[ 868.568246] in_atomic(): 1, irqs_disabled(): 0,
non_block: 0, pid: 4914, name: mount.nfs
[ 868.569626] preempt_count: 1, expected: 0
[ 868.570215] RCU nest depth: 0, expected: 0
[ 868.570809] Preemption disabled at:
[ 868.570810] [<0000000000000000>] 0x0
[ 868.571848] CPU: 1 PID: 4914 Comm: mount.nfs Kdump: loaded
Tainted: G W 5.16.0-rc5.2585cf9dfa #1
[ 868.573273] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
BIOS 1.14.0-4.fc34 04/01/2014
[ 868.574478] Call Trace:
[ 868.574844] <TASK>
[ 868.575156] dump_stack_lvl+0x34/0x44
[ 868.575692] __might_resched.cold+0xd6/0x10f
[ 868.576308] slab_pre_alloc_hook.constprop.0+0x89/0xf0
[ 868.577046] __kmalloc_track_caller+0x72/0x420
[ 868.577684] ? security_context_to_sid_core+0x48/0x2b0
[ 868.578569] kmemdup_nul+0x22/0x50
[ 868.579108] security_context_to_sid_core+0x48/0x2b0
[ 868.579854] ? _nfs4_proc_pathconf+0xff/0x110 [nfsv4]
[ 868.580742] ? nfs_reconfigure+0x80/0x80 [nfs]
[ 868.581355] security_context_str_to_sid+0x36/0x40
[ 868.581960] selinux_sb_mnt_opts_compat+0xb5/0x1e0
[ 868.582550] ? nfs_reconfigure+0x80/0x80 [nfs]
[ 868.583098] security_sb_mnt_opts_compat+0x2a/0x40
[ 868.583676] nfs_compare_super+0x113/0x220 [nfs]
[ 868.584249] ? nfs_try_mount_request+0x210/0x210 [nfs]
[ 868.584879] sget_fc+0xb5/0x2f0
[ 868.585267] nfs_get_tree_common+0x91/0x4a0 [nfs]
[ 868.585834] vfs_get_tree+0x25/0xb0
[ 868.586241] fc_mount+0xe/0x30
[ 868.586605] do_nfs4_mount+0x130/0x380 [nfsv4]
[ 868.587160] nfs4_try_get_tree+0x47/0xb0 [nfsv4]
[ 868.587724] vfs_get_tree+0x25/0xb0
[ 868.588193] do_new_mount+0x176/0x310
[ 868.588782] __x64_sys_mount+0x103/0x140
[ 868.589388] do_syscall_64+0x3b/0x90
[ 868.589935] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 868.590699] RIP: 0033:0x7f2b371c6c4e
[ 868.591239] Code: 48 8b 0d dd 71 0e 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e
0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00
00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d aa 71
0e 00 f7 d8 64 89 01 48
[ 868.593810] RSP: 002b:00007ffc83775d88 EFLAGS: 00000246
ORIG_RAX: 00000000000000a5
[ 868.594691] RAX: ffffffffffffffda RBX: 00007ffc83775f10 RCX: 00007f2b371c6c4e
[ 868.595504] RDX: 0000555d517247a0 RSI: 0000555d51724700 RDI: 0000555d51724540
[ 868.596317] RBP: 00007ffc83775f10 R08: 0000555d51726890 R09: 0000555d51726890
[ 868.597162] R10: 0000000000000000 R11: 0000000000000246 R12: 0000555d51726890
[ 868.598005] R13: 0000000000000003 R14: 0000555d517246e0 R15: 0000555d511ac925
[ 868.598826] </TASK>
Cc: stable@vger.kernel.org
Fixes: 69c4a42d72eb ("lsm,selinux: add new hook to compare new mount to an existing mount")
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
[PM: cleanup/line-wrap the backtrace]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-12-16
We've added 15 non-merge commits during the last 7 day(s) which contain
a total of 12 files changed, 434 insertions(+), 30 deletions(-).
The main changes are:
1) Fix incorrect verifier state pruning behavior for <8B register spill/fill,
from Paul Chaignon.
2) Fix x86-64 JIT's extable handling for fentry/fexit when return pointer
is an ERR_PTR(), from Alexei Starovoitov.
3) Fix 3 different possibilities that BPF verifier missed where unprivileged
could leak kernel addresses, from Daniel Borkmann.
4) Fix xsk's poll behavior under need_wakeup flag, from Magnus Karlsson.
5) Fix an oob-write in test_verifier due to a missed MAX_NR_MAPS bump,
from Kumar Kartikeya Dwivedi.
6) Fix a race in test_btf_skc_cls_ingress selftest, from Martin KaFai Lau.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, selftests: Fix racing issue in btf_skc_cls_ingress test
selftest/bpf: Add a test that reads various addresses.
bpf: Fix extable address check.
bpf: Fix extable fixup offset.
bpf, selftests: Add test case trying to taint map value pointer
bpf: Make 32->64 bounds propagation slightly more robust
bpf: Fix signed bounds propagation after mov32
bpf, selftests: Update test case for atomic cmpxchg on r0 with pointer
bpf: Fix kernel address leakage in atomic cmpxchg's r0 aux reg
bpf, selftests: Add test case for atomic fetch on spilled pointer
bpf: Fix kernel address leakage in atomic fetch
selftests/bpf: Fix OOB write in test_verifier
xsk: Do not sleep in poll() when need_wakeup set
selftests/bpf: Tests for state pruning with u32 spill/fill
bpf: Fix incorrect state pruning for <8B spill/fill
====================
Link: https://lore.kernel.org/r/20211216210005.13815-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The libbpf CI reported occasional failure in btf_skc_cls_ingress:
test_syncookie:FAIL:Unexpected syncookie states gen_cookie:80326634 recv_cookie:0
bpf prog error at line 97
"error at line 97" means the bpf prog cannot find the listening socket
when the final ack is received. It then skipped processing
the syncookie in the final ack which then led to "recv_cookie:0".
The problem is the userspace program did not do accept() and went
ahead to close(listen_fd) before the kernel (and the bpf prog) had
a chance to process the final ack.
The fix is to add accept() call so that the userspace will wait for
the kernel to finish processing the final ack first before close()-ing
everything.
Fixes: 9a856cae2217 ("bpf: selftest: Add test_btf_skc_cls_ingress")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211216191630.466151-1-kafai@fb.com
|
|
Add a function to bpf_testmod that returns invalid kernel and user addresses.
Then attach an fexit program to that function that tries to read
memory through these addresses.
This logic checks that bpf_probe_read_kernel and BPF_PROBE_MEM logic is sane.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The verifier checks that PTR_TO_BTF_ID pointer is either valid or NULL,
but it cannot distinguish IS_ERR pointer from valid one.
When offset is added to IS_ERR pointer it may become small positive
value which is a user address that is not handled by extable logic
and has to be checked for at the runtime.
Tighten BPF_PROBE_MEM pointer check code to prevent this case.
Fixes: 4c5de127598e ("bpf: Emit explicit NULL pointer checks for PROBE_LDX instructions.")
Reported-by: Lorenzo Fontana <lorenzo.fontana@elastic.co>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The prog - start_of_ldx is the offset before the faulting ldx to the location
after it, so this will be used to adjust pt_regs->ip for jumping over it and
continuing, and with old temp it would have been fixed up to the wrong offset,
causing crash.
Fixes: 4c5de127598e ("bpf: Emit explicit NULL pointer checks for PROBE_LDX instructions.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Jean-Philippe Brucker says:
====================
Since v1 [1], I added Quentin's acks and applied Andrii's suggestions:
* Pass CFLAGS to libbpf link in patch 3
* Substitute CLANG_CROSS_FLAGS whole in HOST_CFLAGS to avoid accidents,
patch 4
Add support for cross-building BPF tools and selftests with clang, by
passing LLVM=1 or CC=clang to make, as well as CROSS_COMPILE. A single
clang toolchain can generate binaries for multiple architectures, so
instead of having prefixes such as aarch64-linux-gnu-gcc, clang uses the
-target parameter: `clang -target aarch64-linux-gnu'.
Patch 1 adds the parameter in Makefile.include so tools can easily
support this. Patch 2 prepares for the libbpf change from patch 3 (keep
building resolve_btfids's libbpf in the host arch, when cross-building
the kernel with clang). Patches 3-6 enable cross-building BPF tools with
clang.
[1] https://lore.kernel.org/bpf/20211122192019.1277299-1-jean-philippe@linaro.org/
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Cross building using clang requires passing the "-target" flag rather
than using the CROSS_COMPILE prefix. Makefile.include transforms
CROSS_COMPILE into CLANG_CROSS_FLAGS. Clear CROSS_COMPILE for bpftool
and the host libbpf, and use the clang flags for urandom_read and bench.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-7-jean-philippe@linaro.org
|
|
Cross-building using clang requires passing the "-target" flag rather
than using the CROSS_COMPILE prefix. Makefile.include transforms
CROSS_COMPILE into CLANG_CROSS_FLAGS. Add them to CFLAGS, and erase
CROSS_COMPILE for the bpftool build, since it needs to be executed on
the host.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-6-jean-philippe@linaro.org
|
|
Cross-building using clang requires passing the "-target" flag rather
than using the CROSS_COMPILE prefix. Makefile.include transforms
CROSS_COMPILE into CLANG_CROSS_FLAGS, and adds that to CFLAGS. Remove
the cross flags for the bootstrap bpftool, and erase the CROSS_COMPILE
flag for the bootstrap libbpf.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-5-jean-philippe@linaro.org
|
|
Cross-building using clang requires passing the "-target" flag rather
than using the CROSS_COMPILE prefix. Makefile.include transforms
CROSS_COMPILE into CLANG_CROSS_FLAGS. Add them to the CFLAGS.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-4-jean-philippe@linaro.org
|
|
The CROSS_COMPILE variable may be present during resolve_btfids build if
the kernel is being cross-built. Since resolve_btfids is always executed
on the host, we set CC to HOSTCC in order to use the host toolchain when
cross-building with GCC. But instead of a toolchain prefix, cross-build
with clang uses a "-target" parameter, which Makefile.include deduces
from the CROSS_COMPILE variable. In order to avoid cross-building
libbpf, clear CROSS_COMPILE before building resolve_btfids.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-3-jean-philippe@linaro.org
|
|
Cross-compilation with clang uses the -target parameter rather than a
toolchain prefix. Just like the kernel Makefile, add that parameter to
CFLAGS when CROSS_COMPILE is set.
Unlike the kernel Makefile, we use the --sysroot and --gcc-toolchain
options because unlike the kernel, tools require standard libraries.
Commit c91d4e47e10e ("Makefile: Remove '--gcc-toolchain' flag") provides
some background about --gcc-toolchain. Normally clang finds on its own
the additional utilities and libraries that it needs (for example GNU ld
or glibc). On some systems however, this autodetection doesn't work.
There, our only recourse is asking GCC directly, and pass the result to
--sysroot and --gcc-toolchain. Of course that only works when a cross
GCC is available.
Autodetection worked fine on Debian, but to use the aarch64-linux-gnu
toolchain from Archlinux I needed both --sysroot (for crt1.o) and
--gcc-toolchain (for crtbegin.o, -lgcc). The --prefix parameter wasn't
needed there, but it might be useful on other distributions.
Use the CLANG_CROSS_FLAGS variable instead of CLANG_FLAGS because it
allows tools such as bpftool, that need to build both host and target
binaries, to easily filter out the cross-build flags from CFLAGS.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-2-jean-philippe@linaro.org
|
